diff --git a/workspace/stm32f407_cmsis/.cproject b/workspace/stm32f407_cmsis/.cproject new file mode 100644 index 0000000..45adc73 --- /dev/null +++ b/workspace/stm32f407_cmsis/.cproject @@ -0,0 +1,203 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/workspace/stm32f407_cmsis/.mxproject b/workspace/stm32f407_cmsis/.mxproject new file mode 100644 index 0000000..5c918de --- /dev/null +++ b/workspace/stm32f407_cmsis/.mxproject @@ -0,0 +1,28 @@ +[PreviousGenFiles] +AdvancedFolderStructure=true +HeaderFileListSize=4 +HeaderFiles#0=..\Core\Inc\FreeRTOSConfig.h +HeaderFiles#1=..\Core\Inc\stm32f4xx_it.h +HeaderFiles#2=..\Core\Inc\stm32f4xx_hal_conf.h +HeaderFiles#3=..\Core\Inc\main.h +HeaderFolderListSize=1 +HeaderPath#0=..\Core\Inc +HeaderFiles=; +SourceFileListSize=5 +SourceFiles#0=..\Core\Src\freertos.c +SourceFiles#1=..\Core\Src\stm32f4xx_it.c +SourceFiles#2=..\Core\Src\stm32f4xx_hal_msp.c +SourceFiles#3=..\Core\Src\stm32f4xx_hal_timebase_tim.c +SourceFiles#4=..\Core\Src\main.c +SourceFolderListSize=1 +SourcePath#0=..\Core\Src +SourceFiles=; + +[PreviousLibFiles] +LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f407xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cachel1_armv7.h;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm55.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_cm85.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\core_starmc1.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\pac_armv81.h;Drivers\CMSIS\Include\pmu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[PreviousUsedCubeIDEFiles] +SourceFiles=Core\Src\main.c;Core\Src\freertos.c;Core\Src\stm32f4xx_it.c;Core\Src\stm32f4xx_hal_msp.c;Core\Src\stm32f4xx_hal_timebase_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Core\Src\system_stm32f4xx.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Core\Src\system_stm32f4xx.c;;;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c; +HeaderPath=Drivers\STM32F4xx_HAL_Driver\Inc;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;Middlewares\Third_Party\FreeRTOS\Source\include;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F;Drivers\CMSIS\Device\ST\STM32F4xx\Include;Drivers\CMSIS\Include;Core\Inc; +CDefines=USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + diff --git a/workspace/stm32f407_default/.project b/workspace/stm32f407_cmsis/.project similarity index 97% rename from workspace/stm32f407_default/.project rename to workspace/stm32f407_cmsis/.project index 08b628c..c08e2a7 100644 --- a/workspace/stm32f407_default/.project +++ b/workspace/stm32f407_cmsis/.project @@ -1,6 +1,6 @@ - stm32f407_default + stm32f407_cmsis diff --git a/workspace/stm32f407_default/.settings/com.st.stm32cube.ide.mcu.sfrview.prefs b/workspace/stm32f407_cmsis/.settings/com.st.stm32cube.ide.mcu.sfrview.prefs similarity index 100% rename from workspace/stm32f407_default/.settings/com.st.stm32cube.ide.mcu.sfrview.prefs rename to workspace/stm32f407_cmsis/.settings/com.st.stm32cube.ide.mcu.sfrview.prefs diff --git a/workspace/stm32f407_default/.settings/language.settings.xml b/workspace/stm32f407_cmsis/.settings/language.settings.xml similarity index 96% rename from workspace/stm32f407_default/.settings/language.settings.xml rename to workspace/stm32f407_cmsis/.settings/language.settings.xml index 7bc40be..36287bf 100644 --- a/workspace/stm32f407_default/.settings/language.settings.xml +++ b/workspace/stm32f407_cmsis/.settings/language.settings.xml @@ -1,6 +1,6 @@ - + @@ -11,7 +11,7 @@ - + diff --git a/workspace/stm32f407_cmsis/.settings/org.eclipse.cdt.core.prefs b/workspace/stm32f407_cmsis/.settings/org.eclipse.cdt.core.prefs new file mode 100644 index 0000000..c8ec5df --- /dev/null +++ b/workspace/stm32f407_cmsis/.settings/org.eclipse.cdt.core.prefs @@ -0,0 +1,6 @@ +doxygen/doxygen_new_line_after_brief=true +doxygen/doxygen_use_brief_tag=false +doxygen/doxygen_use_javadoc_tags=true +doxygen/doxygen_use_pre_tag=false +doxygen/doxygen_use_structural_commands=false +eclipse.preferences.version=1 diff --git a/workspace/stm32f407_default/.settings/org.eclipse.core.resources.prefs b/workspace/stm32f407_cmsis/.settings/org.eclipse.core.resources.prefs similarity index 100% rename from workspace/stm32f407_default/.settings/org.eclipse.core.resources.prefs rename to workspace/stm32f407_cmsis/.settings/org.eclipse.core.resources.prefs diff --git a/workspace/stm32f407_cmsis/.settings/stm32cubeide.project.prefs b/workspace/stm32f407_cmsis/.settings/stm32cubeide.project.prefs new file mode 100644 index 0000000..9e188f5 --- /dev/null +++ b/workspace/stm32f407_cmsis/.settings/stm32cubeide.project.prefs @@ -0,0 +1,3 @@ +8DF89ED150041C4CBC7CB9A9CAA90856=148C24F1ED0E12D51B9963C4D381CBE5 +DC22A860405A8BF2F2C095E5B6529F12=9235635E3D5E9B727FDA88279825EB33 +eclipse.preferences.version=1 diff --git a/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_adc.h b/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_adc.h new file mode 100644 index 0000000..1532d0e --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_adc.h @@ -0,0 +1,52 @@ +#ifndef __STM32F407XX_ADC_H +#define __STM32F407XX_ADC_H + +#include +#include "stm32f4xx.h" + +#define ADC_CH0 0U +#define ADC_CH1 1U +#define ADC_CH2 2U +#define ADC_CH3 3U +#define ADC_CH4 4U +#define ADC_CH5 5U +#define ADC_CH6 6U +#define ADC_CH7 7U +#define ADC_CH8 8U + +// ADC1, ADC2, ADC3 are connected to APB2 84MHz bus +// ADC-A00: 12 +// ADC-A01: 11 +// ADC-A02: 14 +// ADC-A03: 13 +// ADC-A04: 16 +// ADC-A05: 15 +// ADC-A06: 18 +// ADC-A07: 17 +// ADC-A08: 43 +// ADC-A09: 44 +// ADC-A10: 41 +// ADC-A13: 42 +// ADC-A14: 39 +// ADC-A15: 40 + +// Timer can also be configured to trigger ADC conversion periodically +uint16_t ADC_PA1_start_read(void); +void ADC_PA1_continuous_conv_init(void); + + +/******************* Example ******************* + +uint32_t value; +int main(void) { + ADC_PA1_continuous_conv_init(); + while(1) { + value = ADC_PA1_start_read(); + } +} + +***********************************************/ + + + +#endif diff --git a/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_gpio.h b/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_gpio.h new file mode 100644 index 0000000..fdd958b --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_gpio.h @@ -0,0 +1,44 @@ +#ifndef __STM32F407XX_GPIO_H +#define __STM32F407XX_GPIO_H + +#include +#include +#include "stm32f4xx.h" + +#define BUTTON_PIN (1UL << 0) +#define LED_GREEN (1UL << 12) +#define LED_ORANGE (1UL << 13) +#define LED_RED (1UL << 14) +#define LED_BLUE (1UL << 15) + + +void FPU_enable(void); +void LED_init(void); +void Button_init(void); +uint8_t get_button_state(void); + + +/******************* Example ******************* + +// GPIOD->ODR ^= LED_GREEN; +// GPIOD->ODR ^= LED_ORANGE; +// GPIOD->ODR ^= LED_RED; +// GPIOD->ODR ^= LED_BLUE; + +// Set high +// GPIOD->ODR |= LED_GREEN; +// GPIOD->ODR |= LED_ORANGE; +// GPIOD->ODR |= LED_RED; +// GPIOD->ODR |= LED_BLUE; + +// Set low +// GPIOD->ODR &= ~LED_GREEN; +// GPIOD->ODR &= ~LED_ORANGE; +// GPIOD->ODR &= ~LED_RED; +// GPIOD->ODR &= ~LED_BLUE; + +***********************************************/ + + + +#endif diff --git a/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_systick.h b/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_systick.h new file mode 100644 index 0000000..56b4bb7 --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_systick.h @@ -0,0 +1,58 @@ +#ifndef __STM32F407XX_SYSTICK_H +#define __STM32F407XX_SYSTICK_H + +#include "stm32f4xx.h" + +#define CTRL_ENABLE (1U << 0) +#define CTRL_TICKINT (1U << 1) +#define CTRL_CLCKSRC (1U << 2) + +#define CORE_CLOCK_HZ 16000000UL +#define SYSTICK_HZ 1000UL +#define SYSTICK_LOAD (CORE_CLOCK_HZ / SYSTICK_HZ) + + +/* static limits visibility and gives permanent storage: + * + * (1) At file scope, static means g_curr_tick can only be + * accessed directly from this .c file. + * + * (2) It prevents another source file from referring to + * it with extern. + * + * (3) The variable exists for the entire lifetime of the + * program. + * + * (4) It is automatically initialized to zero. + * + * volatile controls compiler optimization: + * + * (1) It tells the compiler that the value can change + * outside the normal program flow. + * + * (2) In this case, SysTick_Handler() changes it + * asynchronously. + * + * (3) Every source-level read or write must access the + * variable rather than reuse a previously cached value. + */ + +// Every read and write must access memory because +// this value may change unexpectedly +static volatile uint32_t g_curr_tick = 0U; + +uint32_t get_tick(void); +void delay_ms(uint32_t wait_ms); +void Systick_timebase_init(void); + + +/******************* Example ******************* + + + + +***********************************************/ + + + +#endif diff --git a/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_uart.h b/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_uart.h new file mode 100644 index 0000000..0087107 --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Inc/stm32f407xx_uart.h @@ -0,0 +1,25 @@ +#ifndef __STM32F407XX_UART_H +#define __STM32F407XX_UART_H + +#include +#include +#include "stm32f4xx.h" + + +void uart_write(uint8_t ch); +int __io_putchar(int ch); +void UART2_tx_init(uint32_t apb1_clk, uint32_t baudrate); + + + +/******************* Example ******************* + + + + + +***********************************************/ + + + +#endif diff --git a/workspace/stm32f407_cmsis/Core/Src/main.c b/workspace/stm32f407_cmsis/Core/Src/main.c new file mode 100644 index 0000000..ba6570c --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Src/main.c @@ -0,0 +1,44 @@ +#include +#include + +#include "stm32f4xx.h" +#include "stm32f407xx_systick.h" +#include "stm32f407xx_uart.h" +#include "stm32f407xx_gpio.h" +#include "stm32f407xx_adc.h" + + +int main(void) { + + Systick_timebase_init(); + FPU_enable(); + LED_init(); + Button_init(); + ADC_PA1_continuous_conv_init(); + UART2_tx_init(16000000, 115200); + + uint8_t button_state; + uint16_t adc_value; + + while(1) { + + GPIOD->ODR ^= LED_GREEN; + GPIOD->ODR ^= LED_ORANGE; + GPIOD->ODR ^= LED_RED; + GPIOD->ODR ^= LED_BLUE; + + button_state = get_button_state(); + adc_value = ADC_PA1_start_read(); + + printf("ADC value: %u\r\n", adc_value); + + if (button_state) { + printf("Hello, user button is pressed!\r\n"); + } else { + printf("Hello, user button is not pressed!\r\n"); + } + + delay_ms(1000); + } + +} diff --git a/workspace/stm32f407_cmsis/Core/Src/main_reference.c b/workspace/stm32f407_cmsis/Core/Src/main_reference.c new file mode 100644 index 0000000..51d6710 --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Src/main_reference.c @@ -0,0 +1,224 @@ +#include +#include + +#include "main.h" // include "stm32f4xx_hal.h" +#include "cmsis_os.h" // include "FreeRTOS.h" and "task.h" + +#define GREEN GPIO_PIN_12 // LEFT +#define ORANGE GPIO_PIN_13 // UP +#define RED GPIO_PIN_14 // RIGHT +#define BLUE GPIO_PIN_15 // DOWN + +uint32_t HCLK_freq; +uint32_t PCLK1_freq; +uint32_t PCLK2_freq; + + +// pdMS_TO_TICKS() defined in projdefs.h +const TickType_t _500ms = pdMS_TO_TICKS(500); +const TickType_t _1000ms = pdMS_TO_TICKS(1000); + +// 168 MHz +void SystemClock_Config(void); + +// LED +void GPIO_LED_Init(void); + +// UART2 +UART_HandleTypeDef huart2; +static void UART2_Init(void); +int __io_putchar(int ch); + + +int main(void) { + + HAL_Init(); + SystemClock_Config(); + + UART2_Init(); + GPIO_LED_Init(); + + while(1) { + + for(uint32_t i=0; i<10000000; i++); + HAL_GPIO_TogglePin(GPIOD, BLUE); + HAL_GPIO_TogglePin(GPIOD, RED); + HAL_GPIO_TogglePin(GPIOD, GREEN); + HAL_GPIO_TogglePin(GPIOD, ORANGE); + printf("Hello World!\r\n"); + + } + +} + + +// ------------------------------------------------------------------------- + + +// GPIO Setup +void GPIO_LED_Init(void) { + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + // GPIO Ports for LEDs + __HAL_RCC_GPIOD_CLK_ENABLE(); + + // Set to low, GPIO_PIN_RESET means low + HAL_GPIO_WritePin(GPIOD, GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15, GPIO_PIN_RESET); + + // Configure GPIO pins: PD12 PD13 PD14 PD15 + GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + +} + + +// UART2 +static void UART2_Init(void) { + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + // Enable UART pins clock access to GPIOA + __HAL_RCC_GPIOA_CLK_ENABLE(); + + // Enable UART module clock access to USART2 + __HAL_RCC_USART2_CLK_ENABLE(); + + // Configure pins to act as alternate function pins (UART) + GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + huart2.Instance = USART2; + huart2.Init.BaudRate = 115200; + huart2.Init.WordLength = UART_WORDLENGTH_8B; + huart2.Init.StopBits = UART_STOPBITS_1; + huart2.Init.Parity = UART_PARITY_NONE; + huart2.Init.Mode = UART_MODE_TX_RX; + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + + if (HAL_UART_Init(&huart2) != HAL_OK) { + Error_Handler(); + } + +} + + +// Implement printf function +int __io_putchar(int ch) { + // HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, + // uint16_t Size, uint32_t Timeout) + HAL_UART_Transmit(&huart2, (uint8_t *)&ch, 1, 100); + return ch; +} + + +/* @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) { + + RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; + RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; + + /* Configure the main internal regulator output voltage */ + __HAL_RCC_PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Initializes the RCC Oscillators according to the specified + parameters in the RCC_OscInitTypeDef structure. */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 4; + RCC_OscInitStruct.PLL.PLLN = 168; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 4; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) { + Error_Handler(); + } + + // Test HCLK clock + HCLK_freq = HAL_RCC_GetHCLKFreq(); + if (HCLK_freq != (uint32_t)168000000) { + Error_Handler(); + } + + // Test PCLK1 clock + PCLK1_freq = HAL_RCC_GetPCLK1Freq(); + if (PCLK1_freq != (uint32_t)42000000) { + Error_Handler(); + } + + // Test PCLK2 clock + PCLK2_freq = HAL_RCC_GetPCLK2Freq(); + if (PCLK2_freq != (uint32_t)84000000) { + Error_Handler(); + } + +} + + +/* @brief Period elapsed callback in non blocking mode + * @note This function is called when TIM7 interrupt took place, inside + * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param htim : TIM handle + * @retval None + */ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) { + + if (htim->Instance == TIM7) { + HAL_IncTick(); + } + +} + + +/* @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) { + + /* User can add his own implementation to report the HAL + * error return state */ + __disable_irq(); + while (1) { + } + +} + + +#ifdef USE_FULL_ASSERT +/** @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_adc.c b/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_adc.c new file mode 100644 index 0000000..6a96b63 --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_adc.c @@ -0,0 +1,62 @@ +#include "stm32f407xx_adc.h" + + +uint16_t ADC_PA1_start_read(void) { + + // Start ADC conversion + // 13.13.3 ADC control register 2 (ADC_CR2) + ADC1->CR2 |= ADC_CR2_SWSTART; + + // Wait for conversion to be completed + // 13.13.1 ADC status register (ADC_SR) + while(!(ADC1->SR & ADC_SR_EOC)){} + + // Read converted results + return (uint16_t)ADC1->DR; + +} + + +// Continuous ADC conversion of PA1 +void ADC_PA1_continuous_conv_init(void) { + + // Configure the ADC GPIO pin + // Enable clock access to GPIOA + RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN; + + // Set PA1 mode to analog mode + // 8.4.1 GPIO port mode register (GPIOx_MODER) (x = A..I/J/K) + // GPIOA->MODER |= (1U<<0); // PA0 + // GPIOA->MODER |= (1U<<1); // PA0 + GPIOA->MODER |= (1U<<2); // PA1 + GPIOA->MODER |= (1U<<3); // PA1 + + // Configure ADC module + // Enable clock access to the ADC module + // 7.3.14 RCC APB2 peripheral clock enable register (RCC_APB2ENR) + RCC->APB2ENR |= RCC_APB2ENR_ADC1EN; + + // Set conversion sequence length + // single conversion: L[3:0] bit 20 to bit 23 + ADC1->SQR1 = 0; + + // Set start of conversion sequence + // Channels are mapped to SQx + // For example, channel 5 can be mapped to SQ1 and channel 3 can be mapped to SQ2 + // For single channel, put the channel number to SQ1 + // For example PA0 (0b0000), PA1 (0b0001) + // 13.13.9 ADC regular sequence register 1 (ADC_SQR1): SQ13 to SQ16 + // 13.13.10 ADC regular sequence register 2 (ADC_SQR2): SQ7 to SQ12 + // 13.13.11 ADC regular sequence register 3 (ADC_SQR3): SQ1 to SQ6 + // ADC1->SQR3 |= ADC_CH0; // PA0 to SQ1 + ADC1->SQR3 |= ADC_CH1; // PA1 to SQ1 + + // Enable ADC module + // 13.13.3 ADC control register 2 (ADC_CR2) + ADC1->CR2 |= ADC_CR2_ADON; + + // Enable continuous conversion + // 13.13.3 ADC control register 2 (ADC_CR2) + ADC1->CR2 |= ADC_CR2_CONT; + +} diff --git a/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_gpio.c b/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_gpio.c new file mode 100644 index 0000000..eeefc14 --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_gpio.c @@ -0,0 +1,67 @@ +#include "stm32f407xx_gpio.h" + + +// Enable FPU +// [DUI0553B] Cortex-M4 Devices Generic User Guide.pdf +void FPU_enable(void) { + // Cortex-M4 Devices Generic User Guide + // 4.6 Floating Point Unit (FPU) + // 4.6.1 Co-processor Access Control Register + // Enable CP10, CP11 + SCB->CPACR |= (1U << 20); + SCB->CPACR |= (1U << 21); + SCB->CPACR |= (1U << 22); + SCB->CPACR |= (1U << 23); +} + + +void LED_init(void) { + + // Enable GPIOD peripheral clock using the CMSIS-defined mask + RCC->AHB1ENR |= RCC_AHB1ENR_GPIODEN; + + /* MODER uses two bits per pin: + * 00 = input + * 01 = output + * + * GPIO_MODER_MODER12_Pos: (24U) + * GPIO_MODER_MODER13_Pos: (26U) + * GPIO_MODER_MODER14_Pos: (28U) + * GPIO_MODER_MODER15_Pos: (30U) + */ + GPIOD->MODER &= ~((3UL << GPIO_MODER_MODER12_Pos) | + (3UL << GPIO_MODER_MODER13_Pos) | + (3UL << GPIO_MODER_MODER14_Pos) | + (3UL << GPIO_MODER_MODER15_Pos)); + + GPIOD->MODER |= ((1UL << GPIO_MODER_MODER12_Pos) | + (1UL << GPIO_MODER_MODER13_Pos) | + (1UL << GPIO_MODER_MODER14_Pos) | + (1UL << GPIO_MODER_MODER15_Pos)); + +} + + +void Button_init(void) { + + // Enable clock access to PORTA + RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN; + + // Set PA0 as an input pin + GPIOA->MODER &= ~(1U << 0); + GPIOA->MODER &= ~(1U << 1); + +} + + +uint8_t get_button_state(void) { + + // Check if button is pressed + if(GPIOA->IDR & BUTTON_PIN) { + return 1; + } else { + return 0; + } + +} + diff --git a/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_systick.c b/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_systick.c new file mode 100644 index 0000000..6d1727a --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_systick.c @@ -0,0 +1,51 @@ +#include "stm32f407xx_systick.h" + + +// Systick at 1ms +void Systick_timebase_init(void) +{ + // Disable global interrupts + __disable_irq(); + + // Stop SysTick before configuration + SysTick->CTRL = 0; + + // Load the timer with number of clock cycles per second + SysTick->LOAD = SYSTICK_LOAD - 1; + + // Clear Systick current value register + SysTick->VAL = 0; + + // Select internal clock source + SysTick->CTRL = CTRL_CLCKSRC; + + // Enable interrupt + SysTick->CTRL |= CTRL_TICKINT; + + // Enable Systick + SysTick->CTRL |= CTRL_ENABLE; + + // Enable global interrupts + __enable_irq(); +} + + +uint32_t get_tick(void) { + /* An aligned 32-bit read is atomic on Cortex-M4 + * g_curr_tick must be volatile + */ + return g_curr_tick; +} + + +void delay_ms(uint32_t wait_ms) { + uint32_t tick_start = get_tick(); + while((get_tick() - tick_start) < wait_ms) { + // Busy wait + } +} + + +void SysTick_Handler(void) { + ++g_curr_tick; +} diff --git a/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_uart.c b/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_uart.c new file mode 100644 index 0000000..dcab995 --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Src/stm32f407xx_uart.c @@ -0,0 +1,46 @@ +#include "stm32f407xx_uart.h" + + +int __io_putchar(int ch) { + uart_write((uint8_t)ch); + return ch;; +} + + +void uart_write(uint8_t ch) +{ + // Wait until the transmit data register is empty + while (!(USART2->SR & USART_SR_TXE)) { + // Wait + } + USART2->DR = ch; +} + + +void UART2_tx_init(uint32_t apb1_clk, uint32_t baudrate) +{ + // Enable clock access to GPIOA + RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN; + + // Set the mode of PA2 to alternate function mode + GPIOA->MODER &= ~(1U<<4); + GPIOA->MODER |= (1U<<5); + + // Set PA2 alternate function type to AF7 (UART2_TX) + GPIOA->AFR[0] |= (1U<<8); + GPIOA->AFR[0] |= (1U<<9); + GPIOA->AFR[0] |= (1U<<10); + GPIOA->AFR[0] &= ~(1U<<11); + + // Enable USART2 peripheral clock + RCC->APB1ENR |= RCC_APB1ENR_USART2EN; + + // Disable USART2 while configuring it + USART2->CR1 = 0U; + + // Baud-rate calculation for 16-times oversampling + USART2->BRR = (apb1_clk + (baudrate/2U)) / baudrate; + + // Enable transmitter and USART2 + USART2->CR1 = USART_CR1_TE | USART_CR1_UE; +} diff --git a/workspace/stm32f407_cmsis/Core/Src/syscalls.c b/workspace/stm32f407_cmsis/Core/Src/syscalls.c new file mode 100644 index 0000000..955df11 --- /dev/null +++ b/workspace/stm32f407_cmsis/Core/Src/syscalls.c @@ -0,0 +1,153 @@ +/** + ****************************************************************************** + * @file syscalls.c + * @author Auto-generated by STM32CubeIDE + * @brief STM32CubeIDE Minimal System calls file + * + * For more information about which c-functions + * need which of these lowlevel functions + * please consult the Newlib libc-manual + ****************************************************************************** + * @attention + * + * Copyright (c) 2020-2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* Variables */ +extern int __io_putchar(int ch) __attribute__((weak)); +extern int __io_getchar(void) __attribute__((weak)); + +char *__env[1] = { 0 }; +char **environ = __env; + +/* Functions */ +void initialise_monitor_handles() { +} + +int _getpid(void) { + return 1; +} + +int _kill(int pid, int sig) { + (void) pid; + (void) sig; + errno = EINVAL; + return -1; +} + +void _exit(int status) { + _kill(status, -1); + while (1) { + } /* Make sure we hang here */ +} + +__attribute__((weak)) int _read(int file, char *ptr, int len) { + (void) file; + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) { + *ptr++ = __io_getchar(); + } + + return len; +} + +__attribute__((weak)) int _write(int file, char *ptr, int len) { + (void) file; + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) { + __io_putchar(*ptr++); + } + return len; +} + +int _close(int file) { + (void) file; + return -1; +} + +int _fstat(int file, struct stat *st) { + (void) file; + st->st_mode = S_IFCHR; + return 0; +} + +int _isatty(int file) { + (void) file; + return 1; +} + +int _lseek(int file, int ptr, int dir) { + (void) file; + (void) ptr; + (void) dir; + return 0; +} + +int _open(char *path, int flags, ...) { + (void) path; + (void) flags; + /* Pretend like we always fail */ + return -1; +} + +int _wait(int *status) { + (void) status; + errno = ECHILD; + return -1; +} + +int _unlink(char *name) { + (void) name; + errno = ENOENT; + return -1; +} + +int _times(struct tms *buf) { + (void) buf; + return -1; +} + +int _stat(char *file, struct stat *st) { + (void) file; + st->st_mode = S_IFCHR; + return 0; +} + +int _link(char *old, char *new) { + (void) old; + (void) new; + errno = EMLINK; + return -1; +} + +int _fork(void) { + errno = EAGAIN; + return -1; +} + +int _execve(char *name, char **argv, char **env) { + (void) name; + (void) argv; + (void) env; + errno = ENOMEM; + return -1; +} diff --git a/workspace/stm32f407_default/Core/Src/sysmem.c b/workspace/stm32f407_cmsis/Core/Src/sysmem.c similarity index 70% rename from workspace/stm32f407_default/Core/Src/sysmem.c rename to workspace/stm32f407_cmsis/Core/Src/sysmem.c index 921ecef..90456bd 100644 --- a/workspace/stm32f407_default/Core/Src/sysmem.c +++ b/workspace/stm32f407_cmsis/Core/Src/sysmem.c @@ -10,7 +10,7 @@ ****************************************************************************** * @attention * - * Copyright (c) 2023 STMicroelectronics. + * Copyright (c) 2026 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file @@ -50,30 +50,28 @@ static uint8_t *__sbrk_heap_end = NULL; * @param incr Memory size * @return Pointer to allocated memory */ -void *_sbrk(ptrdiff_t incr) -{ - extern uint8_t _end; /* Symbol defined in the linker script */ - extern uint8_t _estack; /* Symbol defined in the linker script */ - extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ - const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; - const uint8_t *max_heap = (uint8_t *)stack_limit; - uint8_t *prev_heap_end; +void* _sbrk(ptrdiff_t incr) { + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t) &_estack + - (uint32_t) &_Min_Stack_Size; + const uint8_t *max_heap = (uint8_t*) stack_limit; + uint8_t *prev_heap_end; - /* Initialize heap end at first call */ - if (NULL == __sbrk_heap_end) - { - __sbrk_heap_end = &_end; - } + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) { + __sbrk_heap_end = &_end; + } - /* Protect heap from growing into the reserved MSP stack */ - if (__sbrk_heap_end + incr > max_heap) - { - errno = ENOMEM; - return (void *)-1; - } + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) { + errno = ENOMEM; + return (void*) -1; + } - prev_heap_end = __sbrk_heap_end; - __sbrk_heap_end += incr; + prev_heap_end = __sbrk_heap_end; + __sbrk_heap_end += incr; - return (void *)prev_heap_end; + return (void*) prev_heap_end; } diff --git a/workspace/stm32f407_default/Core/Src/system_stm32f4xx.c b/workspace/stm32f407_cmsis/Core/Src/system_stm32f4xx.c similarity index 75% rename from workspace/stm32f407_default/Core/Src/system_stm32f4xx.c rename to workspace/stm32f407_cmsis/Core/Src/system_stm32f4xx.c index 3bd40f7..98878f0 100644 --- a/workspace/stm32f407_default/Core/Src/system_stm32f4xx.c +++ b/workspace/stm32f407_cmsis/Core/Src/system_stm32f4xx.c @@ -1,54 +1,53 @@ /** - ****************************************************************************** - * @file system_stm32f4xx.c - * @author MCD Application Team - * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. - * - * This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f4xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ + ****************************************************************************** + * @file system_stm32f4xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ /** @addtogroup CMSIS - * @{ - */ + * @{ + */ /** @addtogroup stm32f4xx_system - * @{ - */ - -/** @addtogroup STM32F4xx_System_Private_Includes - * @{ - */ + * @{ + */ +/** @addtogroup STM32F4xx_System_Private_Includes + * @{ + */ #include "stm32f4xx.h" #if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ + #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #if !defined (HSI_VALUE) @@ -56,20 +55,20 @@ #endif /* HSI_VALUE */ /** - * @} - */ + * @} + */ /** @addtogroup STM32F4xx_System_Private_TypesDefinitions - * @{ - */ + * @{ + */ /** - * @} - */ + * @} + */ /** @addtogroup STM32F4xx_System_Private_Defines - * @{ - */ + * @{ + */ /************************* Miscellaneous Configuration ************************/ /*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */ @@ -79,7 +78,7 @@ /* #define DATA_IN_ExtSRAM */ #endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\ STM32F412Zx || STM32F412Vx */ - + #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) /* #define DATA_IN_ExtSDRAM */ @@ -87,10 +86,10 @@ STM32F479xx */ /* Note: Following vector table addresses must be defined in line with linker - configuration. */ + configuration. */ /*!< Uncomment the following line if you need to relocate the vector table - anywhere in Flash or Sram, else the vector table is kept at the automatic - remap of boot address selected */ + anywhere in Flash or Sram, else the vector table is kept at the automatic + remap of boot address selected */ /* #define USER_VECT_TAB_ADDRESS */ #if defined(USER_VECT_TAB_ADDRESS) @@ -100,169 +99,166 @@ #if defined(VECT_TAB_SRAM) #define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field. This value must be a multiple of 0x200. */ -#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ #else #define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. This value must be a multiple of 0x200. */ -#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ #endif /* VECT_TAB_SRAM */ +#if !defined(VECT_TAB_OFFSET) +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table offset field. + This value must be a multiple of 0x200. */ +#endif /* VECT_TAB_OFFSET */ #endif /* USER_VECT_TAB_ADDRESS */ /******************************************************************************/ /** - * @} - */ + * @} + */ /** @addtogroup STM32F4xx_System_Private_Macros - * @{ - */ + * @{ + */ /** - * @} - */ + * @} + */ /** @addtogroup STM32F4xx_System_Private_Variables - * @{ - */ - /* This variable is updated in three ways: - 1) by calling CMSIS function SystemCoreClockUpdate() - 2) by calling HAL API function HAL_RCC_GetHCLKFreq() - 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency - Note: If you use this function to configure the system clock; then there - is no need to call the 2 first functions listed above, since SystemCoreClock - variable is updated automatically. - */ + * @{ + */ +/* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ uint32_t SystemCoreClock = 16000000; -const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; +const uint8_t AHBPrescTable[16] = { 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, + 9 }; +const uint8_t APBPrescTable[8] = { 0, 0, 0, 0, 1, 2, 3, 4 }; /** - * @} - */ + * @} + */ /** @addtogroup STM32F4xx_System_Private_FunctionPrototypes - * @{ - */ + * @{ + */ #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) static void SystemInit_ExtMemCtl(void); #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ /** - * @} - */ + * @} + */ /** @addtogroup STM32F4xx_System_Private_Functions - * @{ - */ + * @{ + */ /** - * @brief Setup the microcontroller system - * Initialize the FPU setting, vector table location and External memory - * configuration. - * @param None - * @retval None - */ -void SystemInit(void) -{ - /* FPU settings ------------------------------------------------------------*/ - #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) - SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ - #endif + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and External memory + * configuration. + * @param None + * @retval None + */ +void SystemInit(void) { + /* FPU settings ------------------------------------------------------------*/ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); /* set CP10 and CP11 Full Access */ +#endif #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) SystemInit_ExtMemCtl(); #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ - /* Configure the Vector Table location -------------------------------------*/ + /* Configure the Vector Table location -------------------------------------*/ #if defined(USER_VECT_TAB_ADDRESS) SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ #endif /* USER_VECT_TAB_ADDRESS */ } /** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value - * depends on the application requirements), user has to ensure that HSE_VALUE - * is same as the real frequency of the crystal used. Otherwise, this function - * may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @param None - * @retval None - */ -void SystemCoreClockUpdate(void) -{ - uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value + * depends on the application requirements), user has to ensure that HSE_VALUE + * is same as the real frequency of the crystal used. Otherwise, this function + * may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) { + uint32_t tmp, pllvco, pllp, pllsource, pllm; - switch (tmp) - { - case 0x00: /* HSI used as system clock source */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock source */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock source */ + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N - SYSCLK = PLL_VCO / PLL_P - */ - pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - - if (pllsource != 0) - { - /* HSE used as PLL clock source */ - pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } + switch (tmp) { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ - pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; - SystemCoreClock = pllvco/pllp; - break; - default: - SystemCoreClock = HSI_VALUE; - break; - } - /* Compute HCLK frequency --------------------------------------------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK frequency */ - SystemCoreClock >>= tmp; + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) + * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } else { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) + * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> 16) + 1) * 2; + SystemCoreClock = pllvco / pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; } #if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM) @@ -735,13 +731,13 @@ void SystemInit_ExtMemCtl(void) } #endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ /** - * @} - */ + * @} + */ /** - * @} - */ + * @} + */ /** - * @} - */ + * @} + */ diff --git a/workspace/stm32f407_default/Core/Startup/startup_stm32f407vgtx.s b/workspace/stm32f407_cmsis/Core/Startup/startup_stm32f407vgtx.s similarity index 99% rename from workspace/stm32f407_default/Core/Startup/startup_stm32f407vgtx.s rename to workspace/stm32f407_cmsis/Core/Startup/startup_stm32f407vgtx.s index 3b99b6b..cc5f27e 100644 --- a/workspace/stm32f407_default/Core/Startup/startup_stm32f407vgtx.s +++ b/workspace/stm32f407_cmsis/Core/Startup/startup_stm32f407vgtx.s @@ -59,6 +59,9 @@ defined in linker script */ .type Reset_Handler, %function Reset_Handler: ldr sp, =_estack /* set stack pointer */ + +/* Call the clock system initialization function.*/ + bl SystemInit /* Copy the data segment initializers from flash to SRAM */ ldr r0, =_sdata @@ -91,8 +94,6 @@ LoopFillZerobss: cmp r2, r4 bcc FillZerobss -/* Call the clock system initialization function.*/ - bl SystemInit /* Call static constructors */ bl __libc_init_array /* Call the application's entry point.*/ @@ -121,7 +122,6 @@ Infinite_Loop: *******************************************************************************/ .section .isr_vector,"a",%progbits .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors g_pfnVectors: @@ -227,6 +227,9 @@ g_pfnVectors: .word FPU_IRQHandler /* FPU */ + + .size g_pfnVectors, .-g_pfnVectors + /******************************************************************************* * * Provide weak aliases for each Exception handler to the Default_Handler. diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h similarity index 75% rename from workspace/stm32f407_default/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h index 874659c..c7ca43c 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h @@ -7,7 +7,7 @@ * This file contains: * - Data structures and the address mapping for all peripherals * - peripherals registers declarations and bits definition - * - Macros to access peripheral’s registers hardware + * - Macros to access peripheral's registers hardware * ****************************************************************************** * @attention @@ -29,12 +29,12 @@ /** @addtogroup stm32f407xx * @{ */ - + #ifndef __STM32F407xx_H #define __STM32F407xx_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* __cplusplus */ /** @addtogroup Configuration_section_for_CMSIS @@ -42,7 +42,7 @@ */ /** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals */ #define __CM4_REV 0x0001U /*!< Core revision r0p1 */ #define __MPU_PRESENT 1U /*!< STM32F4XX provides an MPU */ @@ -53,18 +53,18 @@ /** * @} */ - + /** @addtogroup Peripheral_interrupt_number_definition * @{ */ /** - * @brief STM32F4XX Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section + * @brief STM32F4XX Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section */ typedef enum { -/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + /****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ @@ -73,7 +73,7 @@ typedef enum DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ -/****** STM32 specific Interrupt Numbers **********************************************************************/ + /****** STM32 specific Interrupt Numbers **********************************************************************/ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ @@ -169,10 +169,10 @@ typedef enum /** @addtogroup Peripheral_registers_structures * @{ - */ + */ -/** - * @brief Analog to Digital Converter +/** + * @brief Analog to Digital Converter */ typedef struct @@ -208,8 +208,8 @@ typedef struct } ADC_Common_TypeDef; -/** - * @brief Controller Area Network TxMailBox +/** + * @brief Controller Area Network TxMailBox */ typedef struct @@ -220,10 +220,10 @@ typedef struct __IO uint32_t TDHR; /*!< CAN mailbox data high register */ } CAN_TxMailBox_TypeDef; -/** - * @brief Controller Area Network FIFOMailBox +/** + * @brief Controller Area Network FIFOMailBox */ - + typedef struct { __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ @@ -232,20 +232,20 @@ typedef struct __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ } CAN_FIFOMailBox_TypeDef; -/** - * @brief Controller Area Network FilterRegister +/** + * @brief Controller Area Network FilterRegister */ - + typedef struct { __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ } CAN_FilterRegister_TypeDef; -/** - * @brief Controller Area Network +/** + * @brief Controller Area Network */ - + typedef struct { __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ @@ -268,12 +268,12 @@ typedef struct __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ uint32_t RESERVED4; /*!< Reserved, 0x218 */ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ - uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ } CAN_TypeDef; -/** - * @brief CRC calculation unit +/** + * @brief CRC calculation unit */ typedef struct @@ -285,7 +285,7 @@ typedef struct __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ } CRC_TypeDef; -/** +/** * @brief Digital to Analog Converter */ @@ -307,7 +307,7 @@ typedef struct __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ } DAC_TypeDef; -/** +/** * @brief Debug MCU */ @@ -317,9 +317,9 @@ typedef struct __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ -}DBGMCU_TypeDef; +} DBGMCU_TypeDef; -/** +/** * @brief DCMI */ @@ -338,7 +338,7 @@ typedef struct __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ } DCMI_TypeDef; -/** +/** * @brief DMA Controller */ @@ -360,7 +360,7 @@ typedef struct __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ } DMA_TypeDef; -/** +/** * @brief Ethernet MAC */ @@ -435,7 +435,7 @@ typedef struct __IO uint32_t DMACHRBAR; } ETH_TypeDef; -/** +/** * @brief External Interrupt/Event Controller */ @@ -449,7 +449,7 @@ typedef struct __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ } EXTI_TypeDef; -/** +/** * @brief FLASH Registers */ @@ -466,16 +466,16 @@ typedef struct -/** +/** * @brief Flexible Static Memory Controller */ typedef struct { - __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ } FSMC_Bank1_TypeDef; -/** +/** * @brief Flexible Static Memory Controller Bank1E */ @@ -484,10 +484,10 @@ typedef struct __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ } FSMC_Bank1E_TypeDef; -/** +/** * @brief Flexible Static Memory Controller Bank2 */ - + typedef struct { __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ @@ -506,7 +506,7 @@ typedef struct __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ } FSMC_Bank2_3_TypeDef; -/** +/** * @brief Flexible Static Memory Controller Bank4 */ @@ -517,9 +517,9 @@ typedef struct __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ -} FSMC_Bank4_TypeDef; +} FSMC_Bank4_TypeDef; -/** +/** * @brief General Purpose I/O */ @@ -536,7 +536,7 @@ typedef struct __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ } GPIO_TypeDef; -/** +/** * @brief System configuration controller */ @@ -549,7 +549,7 @@ typedef struct __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ } SYSCFG_TypeDef; -/** +/** * @brief Inter-integrated Circuit Interface */ @@ -566,7 +566,7 @@ typedef struct __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ } I2C_TypeDef; -/** +/** * @brief Independent WATCHDOG */ @@ -579,7 +579,7 @@ typedef struct } IWDG_TypeDef; -/** +/** * @brief Power Control */ @@ -589,7 +589,7 @@ typedef struct __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ } PWR_TypeDef; -/** +/** * @brief Reset and Clock Control */ @@ -627,7 +627,7 @@ typedef struct __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ } RCC_TypeDef; -/** +/** * @brief Real-Time Clock */ @@ -675,7 +675,7 @@ typedef struct __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ } RTC_TypeDef; -/** +/** * @brief SD host Interface */ @@ -703,7 +703,7 @@ typedef struct __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */ } SDIO_TypeDef; -/** +/** * @brief Serial Peripheral Interface */ @@ -721,7 +721,7 @@ typedef struct } SPI_TypeDef; -/** +/** * @brief TIM */ @@ -750,10 +750,10 @@ typedef struct __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ } TIM_TypeDef; -/** +/** * @brief Universal Synchronous Asynchronous Receiver Transmitter */ - + typedef struct { __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ @@ -765,7 +765,7 @@ typedef struct __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ } USART_TypeDef; -/** +/** * @brief Window WATCHDOG */ @@ -776,18 +776,18 @@ typedef struct __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ } WWDG_TypeDef; -/** +/** * @brief RNG */ - -typedef struct + +typedef struct { __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ } RNG_TypeDef; -/** +/** * @brief USB_OTG_Core_Registers */ typedef struct @@ -812,10 +812,10 @@ typedef struct __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ } USB_OTG_GlobalTypeDef; -/** +/** * @brief USB_OTG_device_Registers */ -typedef struct +typedef struct { __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ __IO uint32_t DCTL; /*!< dev Control Register 804h */ @@ -839,10 +839,10 @@ typedef struct __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ } USB_OTG_DeviceTypeDef; -/** +/** * @brief USB_OTG_IN_Endpoint-Specific_Register */ -typedef struct +typedef struct { __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ @@ -854,10 +854,10 @@ typedef struct uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ } USB_OTG_INEndpointTypeDef; -/** +/** * @brief USB_OTG_OUT_Endpoint-Specific_Registers */ -typedef struct +typedef struct { __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ @@ -868,10 +868,10 @@ typedef struct uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ } USB_OTG_OUTEndpointTypeDef; -/** +/** * @brief USB_OTG_Host_Mode_Register_Structures */ -typedef struct +typedef struct { __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ @@ -882,7 +882,7 @@ typedef struct __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ } USB_OTG_HostTypeDef; -/** +/** * @brief USB_OTG_Host_Channel_Specific_Registers */ typedef struct @@ -1053,7 +1053,7 @@ typedef struct /** @addtogroup Peripheral_declaration * @{ - */ + */ #define TIM2 ((TIM_TypeDef *) TIM2_BASE) #define TIM3 ((TIM_TypeDef *) TIM3_BASE) #define TIM4 ((TIM_TypeDef *) TIM4_BASE) @@ -1129,7 +1129,7 @@ typedef struct #define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) #define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) #define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) -#define ETH ((ETH_TypeDef *) ETH_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) #define DCMI ((DCMI_TypeDef *) DCMI_BASE) #define RNG ((RNG_TypeDef *) RNG_BASE) #define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) @@ -1156,10 +1156,10 @@ typedef struct * @} */ - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - +/** @addtogroup Peripheral_Registers_Bits_Definition +* @{ +*/ + /******************************************************************************/ /* Peripheral Registers_Bits_Definition */ /******************************************************************************/ @@ -1170,32 +1170,32 @@ typedef struct /* */ /******************************************************************************/ /* - * @brief Specific device feature definitions (not present on all devices in the STM32F4 serie) + * @brief Specific device feature definitions (not present on all devices in the STM32F4 series) */ #define ADC_MULTIMODE_SUPPORT /*!> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#ifndef __SCB_DCACHE_LINE_SIZE +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#endif + +#ifndef __SCB_ICACHE_LINE_SIZE +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#endif + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (volatile void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (volatile void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (volatile void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (volatile void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ + +#endif /* ARM_CACHEL1_ARMV7_H */ diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_armcc.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armcc.h similarity index 94% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_armcc.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armcc.h index 4d9d064..a955d47 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_armcc.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armcc.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file cmsis_armcc.h * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file - * @version V5.0.4 - * @date 10. January 2018 + * @version V5.3.2 + * @date 27. May 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -46,7 +46,12 @@ /* __ARM_ARCH_8M_BASE__ not applicable */ /* __ARM_ARCH_8M_MAIN__ not applicable */ + /* __ARM_ARCH_8_1M_MAIN__ not applicable */ +/* CMSIS compiler control DSP macros */ +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __ARM_FEATURE_DSP 1 +#endif /* CMSIS compiler specific defines */ #ifndef __ASM @@ -58,9 +63,9 @@ #ifndef __STATIC_INLINE #define __STATIC_INLINE static __inline #endif -#ifndef __STATIC_FORCEINLINE +#ifndef __STATIC_FORCEINLINE #define __STATIC_FORCEINLINE static __forceinline -#endif +#endif #ifndef __NO_RETURN #define __NO_RETURN __declspec(noreturn) #endif @@ -100,279 +105,31 @@ #ifndef __RESTRICT #define __RESTRICT __restrict #endif - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ - -/** - \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __enable_irq(); */ - - -/** - \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __disable_irq(); */ - -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__STATIC_INLINE uint32_t __get_CONTROL(void) -{ - register uint32_t __regControl __ASM("control"); - return(__regControl); -} - - -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__STATIC_INLINE void __set_CONTROL(uint32_t control) -{ - register uint32_t __regControl __ASM("control"); - __regControl = control; -} - - -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__STATIC_INLINE uint32_t __get_IPSR(void) -{ - register uint32_t __regIPSR __ASM("ipsr"); - return(__regIPSR); -} - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__STATIC_INLINE uint32_t __get_APSR(void) -{ - register uint32_t __regAPSR __ASM("apsr"); - return(__regAPSR); -} - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - \return xPSR Register value - */ -__STATIC_INLINE uint32_t __get_xPSR(void) -{ - register uint32_t __regXPSR __ASM("xpsr"); - return(__regXPSR); -} - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__STATIC_INLINE uint32_t __get_PSP(void) -{ - register uint32_t __regProcessStackPointer __ASM("psp"); - return(__regProcessStackPointer); -} - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) -{ - register uint32_t __regProcessStackPointer __ASM("psp"); - __regProcessStackPointer = topOfProcStack; -} - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__STATIC_INLINE uint32_t __get_MSP(void) -{ - register uint32_t __regMainStackPointer __ASM("msp"); - return(__regMainStackPointer); -} - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) -{ - register uint32_t __regMainStackPointer __ASM("msp"); - __regMainStackPointer = topOfMainStack; -} - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__STATIC_INLINE uint32_t __get_PRIMASK(void) -{ - register uint32_t __regPriMask __ASM("primask"); - return(__regPriMask); -} - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) -{ - register uint32_t __regPriMask __ASM("primask"); - __regPriMask = (priMask); -} - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __enable_fault_irq __enable_fiq - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __disable_fault_irq __disable_fiq - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__STATIC_INLINE uint32_t __get_BASEPRI(void) -{ - register uint32_t __regBasePri __ASM("basepri"); - return(__regBasePri); -} - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) -{ - register uint32_t __regBasePri __ASM("basepri"); - __regBasePri = (basePri & 0xFFU); -} - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) -{ - register uint32_t __regBasePriMax __ASM("basepri_max"); - __regBasePriMax = (basePri & 0xFFU); -} - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__STATIC_INLINE uint32_t __get_FAULTMASK(void) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - return(__regFaultMask); -} - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - __regFaultMask = (faultMask & (uint32_t)1U); -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ - - -/** - \brief Get FPSCR - \details Returns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -__STATIC_INLINE uint32_t __get_FPSCR(void) -{ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) - register uint32_t __regfpscr __ASM("fpscr"); - return(__regfpscr); -#else - return(0U); +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __memory_changed() #endif -} +/* ######################### Startup and Lowlevel Init ######################## */ -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) -{ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) - register uint32_t __regfpscr __ASM("fpscr"); - __regfpscr = (fpscr); -#else - (void)fpscr; +#ifndef __PROGRAM_START +#define __PROGRAM_START __main #endif -} +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif -/*@} end of CMSIS_Core_RegAccFunctions */ +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif /* ########################## Core Instruction Access ######################### */ /** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface @@ -415,35 +172,23 @@ __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) so that all instructions following the ISB are fetched from cache or memory, after the instruction has been completed. */ -#define __ISB() do {\ - __schedule_barrier();\ - __isb(0xF);\ - __schedule_barrier();\ - } while (0U) +#define __ISB() __isb(0xF) /** \brief Data Synchronization Barrier \details Acts as a special kind of Data Memory Barrier. It completes when all explicit memory accesses before this instruction complete. */ -#define __DSB() do {\ - __schedule_barrier();\ - __dsb(0xF);\ - __schedule_barrier();\ - } while (0U) +#define __DSB() __dsb(0xF) /** \brief Data Memory Barrier \details Ensures the apparent order of the explicit memory operations before and after the instruction, without ensuring their completion. */ -#define __DMB() do {\ - __schedule_barrier();\ - __dmb(0xF);\ - __schedule_barrier();\ - } while (0U) +#define __DMB() __dmb(0xF) + - /** \brief Reverse byte order (32 bit) \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. @@ -781,6 +526,280 @@ __attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint /*@}*/ /* end of group CMSIS_Core_InstructionInterface */ +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; + __ISB(); +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + /* ################### Compiler specific Intrinsics ########################### */ /** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics Access to dedicated SIMD instructions @@ -858,6 +877,10 @@ __attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint #define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ ((int64_t)(ARG3) << 32U) ) >> 32U)) +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + #endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ /*@} end of group CMSIS_SIMD_intrinsics */ diff --git a/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armclang.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..6911417 --- /dev/null +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1503 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.4.3 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL Image$$STACKSEAL$$ZI$$Base +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} +#endif + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} +#endif + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_armclang.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armclang_ltm.h similarity index 94% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_armclang.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armclang_ltm.h index 162a400..1e255d5 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_armclang.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_armclang_ltm.h @@ -1,11 +1,11 @@ /**************************************************************************//** - * @file cmsis_armclang.h + * @file cmsis_armclang_ltm.h * @brief CMSIS compiler armclang (Arm Compiler 6) header file - * @version V5.0.4 - * @date 10. January 2018 + * @version V1.5.3 + * @date 27. May 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2018-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -29,10 +29,6 @@ #pragma clang system_header /* treat file as system include file */ -#ifndef __ARM_COMPAT_H -#include /* Compatibility header for Arm Compiler 5 intrinsics */ -#endif - /* CMSIS compiler specific defines */ #ifndef __ASM #define __ASM __asm @@ -43,9 +39,9 @@ #ifndef __STATIC_INLINE #define __STATIC_INLINE static __inline #endif -#ifndef __STATIC_FORCEINLINE +#ifndef __STATIC_FORCEINLINE #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline -#endif +#endif #ifndef __NO_RETURN #define __NO_RETURN __attribute__((__noreturn__)) #endif @@ -110,666 +106,52 @@ #ifndef __RESTRICT #define __RESTRICT __restrict #endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif +/* ######################### Startup and Lowlevel Init ######################## */ -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif -/** - \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __enable_irq(); see arm_compat.h */ +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif -/** - \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __disable_irq(); see arm_compat.h */ +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) -{ - uint32_t result; +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL Image$$STACKSEAL$$ZI$$Base +#endif - __ASM volatile ("MRS %0, control" : "=r" (result) ); - return(result); -} +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Control Register (non-secure) - \details Returns the content of the non-secure Control Register when in secure mode. - \return non-secure Control Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); - return(result); -} +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL #endif -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) -{ - __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Control Register (non-secure) - \details Writes the given value to the non-secure Control Register when in secure state. - \param [in] control Control Register value to set - */ -__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) -{ - __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; } #endif -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_IPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_APSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, apsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - \return xPSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_xPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__STATIC_FORCEINLINE uint32_t __get_PSP(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, psp" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Process Stack Pointer (non-secure) - \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. - \return PSP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Process Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); -} -#endif - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__STATIC_FORCEINLINE uint32_t __get_MSP(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, msp" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Main Stack Pointer (non-secure) - \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. - \return MSP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Main Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); -} -#endif - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Stack Pointer (non-secure) - \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. - \return SP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. - \param [in] topOfStack Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) -{ - __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); -} -#endif - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Priority Mask (non-secure) - \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. - \return Priority Mask value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) -{ - __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Priority Mask (non-secure) - \details Assigns the given value to the non-secure Priority Mask Register when in secure state. - \param [in] priMask Priority Mask - */ -__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) -{ - __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); -} -#endif - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Base Priority (non-secure) - \details Returns the current value of the non-secure Base Priority register when in secure state. - \return Base Priority register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) -{ - __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Base Priority (non-secure) - \details Assigns the given value to the non-secure Base Priority register when in secure state. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) -{ - __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); -} -#endif - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) -{ - __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); -} - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Fault Mask (non-secure) - \details Returns the current value of the non-secure Fault Mask register when in secure state. - \return Fault Mask register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Fault Mask (non-secure) - \details Assigns the given value to the non-secure Fault Mask register when in secure state. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); -} -#endif - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) - -/** - \brief Get Process Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always in non-secure - mode. - - \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). - \return PSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, psplim" : "=r" (result) ); - return result; -#endif -} - -#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Process Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always in non-secure - mode. - - \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. - \return PSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); - return result; -#endif -} -#endif - - -/** - \brief Set Process Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored in non-secure - mode. - - \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). - \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)ProcStackPtrLimit; -#else - __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Process Stack Pointer (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored in non-secure - mode. - - \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. - \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)ProcStackPtrLimit; -#else - __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); -#endif -} -#endif - - -/** - \brief Get Main Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always. - - \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). - \return MSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, msplim" : "=r" (result) ); - return result; -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Main Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always. - - \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. - \return MSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); - return result; -#endif -} -#endif - - -/** - \brief Set Main Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored. - - \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). - \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - (void)MainStackPtrLimit; -#else - __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Main Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored. - - \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. - \param [in] MainStackPtrLimit Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - (void)MainStackPtrLimit; -#else - __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); -#endif -} -#endif - -#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - -/** - \brief Get FPSCR - \details Returns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr -#else -#define __get_FPSCR() ((uint32_t)0U) -#endif - -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#define __set_FPSCR __builtin_arm_set_fpscr -#else -#define __set_FPSCR(x) ((void)(x)) -#endif - - -/*@} end of CMSIS_Core_RegAccFunctions */ - - /* ########################## Core Instruction Access ######################### */ /** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface Access to dedicated instructions @@ -821,14 +203,14 @@ __STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) so that all instructions following the ISB are fetched from cache or memory, after the instruction has been completed. */ -#define __ISB() __builtin_arm_isb(0xF); +#define __ISB() __builtin_arm_isb(0xF) /** \brief Data Synchronization Barrier \details Acts as a special kind of Data Memory Barrier. It completes when all explicit memory accesses before this instruction complete. */ -#define __DSB() __builtin_arm_dsb(0xF); +#define __DSB() __builtin_arm_dsb(0xF) /** @@ -836,7 +218,7 @@ __STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) \details Ensures the apparent order of the explicit memory operations before and after the instruction, without ensuring their completion. */ -#define __DMB() __builtin_arm_dmb(0xF); +#define __DMB() __builtin_arm_dmb(0xF) /** @@ -908,7 +290,23 @@ __STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) \param [in] value Value to count the leading zeros \return number of leading zeros in value */ -#define __CLZ (uint8_t)__builtin_clz +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} #if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ @@ -1177,7 +575,7 @@ __STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) { uint32_t result; - __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); return ((uint8_t) result); } @@ -1192,7 +590,7 @@ __STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) { uint32_t result; - __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); return ((uint16_t) result); } @@ -1207,7 +605,7 @@ __STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) { uint32_t result; - __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); return(result); } @@ -1220,7 +618,7 @@ __STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) */ __STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) { - __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); } @@ -1232,7 +630,7 @@ __STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) */ __STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) { - __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); } @@ -1244,7 +642,7 @@ __STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) */ __STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) { - __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); } @@ -1313,6 +711,682 @@ __STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) /*@}*/ /* end of group CMSIS_Core_InstructionInterface */ +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} +#endif + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} +#endif + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + /* ################### Compiler specific Intrinsics ########################### */ /** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics Access to dedicated SIMD instructions @@ -1829,31 +1903,16 @@ __STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) return(result); } -#if 0 -#define __PKHBT(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) - -#define __PKHTB(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - if (ARG3 == 0) \ - __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ - else \ - __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) -#endif - #define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) #define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + __STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) { int32_t result; diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_compiler.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_compiler.h similarity index 89% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_compiler.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_compiler.h index 94212eb..adbf296 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_compiler.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_compiler.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file cmsis_compiler.h * @brief CMSIS compiler generic header file - * @version V5.0.4 - * @date 10. January 2018 + * @version V5.1.0 + * @date 09. October 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -35,9 +35,15 @@ /* - * Arm Compiler 6 (armclang) + * Arm Compiler 6.6 LTM (armclang) */ -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) #include "cmsis_armclang.h" @@ -115,8 +121,11 @@ #define __ALIGNED(x) __attribute__((aligned(x))) #endif #ifndef __RESTRICT - #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. - #define __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 #endif @@ -187,6 +196,10 @@ #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. #define __RESTRICT #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif /* @@ -255,6 +268,10 @@ #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. #define __RESTRICT #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif #else diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_gcc.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_gcc.h similarity index 87% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_gcc.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_gcc.h index 2d9db15..67bda4e 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_gcc.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_gcc.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file cmsis_gcc.h * @brief CMSIS compiler GCC header file - * @version V5.0.4 - * @date 09. April 2018 + * @version V5.4.1 + * @date 27. May 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -46,9 +46,9 @@ #ifndef __STATIC_INLINE #define __STATIC_INLINE static inline #endif -#ifndef __STATIC_FORCEINLINE +#ifndef __STATIC_FORCEINLINE #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline -#endif +#endif #ifndef __NO_RETURN #define __NO_RETURN __attribute__((__noreturn__)) #endif @@ -113,6 +113,826 @@ #ifndef __RESTRICT #define __RESTRICT __restrict #endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section(".vectors"))) +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL __StackSeal +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi":::"memory") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe":::"memory") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1, ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1, ARG2) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ /* ########################### Core Function Access ########################### */ @@ -123,7 +943,7 @@ /** \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. Can only be executed in Privileged modes. */ __STATIC_FORCEINLINE void __enable_irq(void) @@ -134,7 +954,7 @@ __STATIC_FORCEINLINE void __enable_irq(void) /** \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. Can only be executed in Privileged modes. */ __STATIC_FORCEINLINE void __disable_irq(void) @@ -181,6 +1001,7 @@ __STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) __STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) { __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); } @@ -193,6 +1014,7 @@ __STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) __STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) { __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); } #endif @@ -383,7 +1205,7 @@ __STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) { uint32_t result; - __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + __ASM volatile ("MRS %0, primask" : "=r" (result) ); return(result); } @@ -398,7 +1220,7 @@ __STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) { uint32_t result; - __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); return(result); } #endif @@ -433,7 +1255,7 @@ __STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) /** \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. Can only be executed in Privileged modes. */ __STATIC_FORCEINLINE void __enable_fault_irq(void) @@ -444,7 +1266,7 @@ __STATIC_FORCEINLINE void __enable_fault_irq(void) /** \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. Can only be executed in Privileged modes. */ __STATIC_FORCEINLINE void __disable_fault_irq(void) @@ -585,7 +1407,7 @@ __STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure Stack Pointer Limit register hence zero is returned always in non-secure mode. - + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). \return PSPLIM Register value */ @@ -630,7 +1452,7 @@ __STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure Stack Pointer Limit register hence the write is silently ignored in non-secure mode. - + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set */ @@ -767,7 +1589,7 @@ __STATIC_FORCEINLINE uint32_t __get_FPSCR(void) { #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#if __has_builtin(__builtin_arm_get_fpscr) +#if __has_builtin(__builtin_arm_get_fpscr) // Re-enable using built-in when GCC has been fixed // || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ @@ -810,723 +1632,6 @@ __STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) /*@} end of CMSIS_Core_RegAccFunctions */ -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/* Define macros for porting to both thumb1 and thumb2. - * For thumb1, use low register (r0-r7), specified by constraint "l" - * Otherwise, use general registers, specified by constraint "r" */ -#if defined (__thumb__) && !defined (__thumb2__) -#define __CMSIS_GCC_OUT_REG(r) "=l" (r) -#define __CMSIS_GCC_RW_REG(r) "+l" (r) -#define __CMSIS_GCC_USE_REG(r) "l" (r) -#else -#define __CMSIS_GCC_OUT_REG(r) "=r" (r) -#define __CMSIS_GCC_RW_REG(r) "+r" (r) -#define __CMSIS_GCC_USE_REG(r) "r" (r) -#endif - -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP() __ASM volatile ("nop") - -/** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -#define __WFI() __ASM volatile ("wfi") - - -/** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE() __ASM volatile ("wfe") - - -/** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV() __ASM volatile ("sev") - - -/** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -__STATIC_FORCEINLINE void __ISB(void) -{ - __ASM volatile ("isb 0xF":::"memory"); -} - - -/** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -__STATIC_FORCEINLINE void __DSB(void) -{ - __ASM volatile ("dsb 0xF":::"memory"); -} - - -/** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -__STATIC_FORCEINLINE void __DMB(void) -{ - __ASM volatile ("dmb 0xF":::"memory"); -} - - -/** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. - \param [in] value Value to reverse - \return Reversed value - */ -__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) -{ -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) - return __builtin_bswap32(value); -#else - uint32_t result; - - __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return result; -#endif -} - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. - \param [in] value Value to reverse - \return Reversed value - */ -__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return result; -} - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. - \param [in] value Value to reverse - \return Reversed value - */ -__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) -{ -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - return (int16_t)__builtin_bswap16(value); -#else - int16_t result; - - __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return result; -#endif -} - - -/** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] op1 Value to rotate - \param [in] op2 Number of Bits to rotate - \return Rotated value - */ -__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) -{ - op2 %= 32U; - if (op2 == 0U) - { - return op1; - } - return (op1 >> op2) | (op1 << (32U - op2)); -} - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) __ASM volatile ("bkpt "#value) - - -/** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ -__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) -{ - uint32_t result; - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) - __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); -#else - uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ - - result = value; /* r will be reversed bits of v; first get LSB of v */ - for (value >>= 1U; value != 0U; value >>= 1U) - { - result <<= 1U; - result |= value & 1U; - s--; - } - result <<= s; /* shift when v's highest bits are zero */ -#endif - return result; -} - - -/** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ (uint8_t)__builtin_clz - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) -/** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); -#endif - return ((uint8_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); -#endif - return ((uint16_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); - return(result); -} - - -/** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) -{ - uint32_t result; - - __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) -{ - uint32_t result; - - __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); - return(result); -} - - -/** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -__STATIC_FORCEINLINE void __CLREX(void) -{ - __ASM volatile ("clrex" ::: "memory"); -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] ARG1 Value to be saturated - \param [in] ARG2 Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT(ARG1,ARG2) \ -__extension__ \ -({ \ - int32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] ARG1 Value to be saturated - \param [in] ARG2 Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT(ARG1,ARG2) \ - __extension__ \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** - \brief Rotate Right with Extend (32 bit) - \details Moves each bit of a bitstring right by one bit. - The carry input is shifted in at the left end of the bitstring. - \param [in] value Value to rotate - \return Rotated value - */ -__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -} - - -/** - \brief LDRT Unprivileged (8 bit) - \details Executes a Unprivileged LDRT instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); -#endif - return ((uint8_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (16 bit) - \details Executes a Unprivileged LDRT instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); -#endif - return ((uint16_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (32 bit) - \details Executes a Unprivileged LDRT instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief STRT Unprivileged (8 bit) - \details Executes a Unprivileged STRT instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) -{ - __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (16 bit) - \details Executes a Unprivileged STRT instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) -{ - __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (32 bit) - \details Executes a Unprivileged STRT instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) -{ - __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); -} - -#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) -{ - if ((sat >= 1U) && (sat <= 32U)) - { - const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); - const int32_t min = -1 - max ; - if (val > max) - { - return max; - } - else if (val < min) - { - return min; - } - } - return val; -} - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) -{ - if (sat <= 31U) - { - const uint32_t max = ((1U << sat) - 1U); - if (val > (int32_t)max) - { - return max; - } - else if (val < 0) - { - return 0U; - } - } - return (uint32_t)val; -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) -/** - \brief Load-Acquire (8 bit) - \details Executes a LDAB instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint8_t) result); -} - - -/** - \brief Load-Acquire (16 bit) - \details Executes a LDAH instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint16_t) result); -} - - -/** - \brief Load-Acquire (32 bit) - \details Executes a LDA instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief Store-Release (8 bit) - \details Executes a STLB instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) -{ - __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Store-Release (16 bit) - \details Executes a STLH instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) -{ - __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Store-Release (32 bit) - \details Executes a STL instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) -{ - __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Load-Acquire Exclusive (8 bit) - \details Executes a LDAB exclusive instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint8_t) result); -} - - -/** - \brief Load-Acquire Exclusive (16 bit) - \details Executes a LDAH exclusive instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint16_t) result); -} - - -/** - \brief Load-Acquire Exclusive (32 bit) - \details Executes a LDA exclusive instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief Store-Release Exclusive (8 bit) - \details Executes a STLB exclusive instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief Store-Release Exclusive (16 bit) - \details Executes a STLH exclusive instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief Store-Release Exclusive (32 bit) - \details Executes a STL exclusive instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); - return(result); -} - -#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - - /* ################### Compiler specific Intrinsics ########################### */ /** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics Access to dedicated SIMD instructions @@ -1547,7 +1652,7 @@ __STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1555,7 +1660,7 @@ __STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1571,7 +1676,7 @@ __STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1579,7 +1684,7 @@ __STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1596,7 +1701,7 @@ __STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1604,7 +1709,7 @@ __STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1620,7 +1725,7 @@ __STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1628,7 +1733,7 @@ __STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1645,7 +1750,7 @@ __STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1653,7 +1758,7 @@ __STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1669,7 +1774,7 @@ __STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1677,7 +1782,7 @@ __STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1693,7 +1798,7 @@ __STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1701,7 +1806,7 @@ __STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1717,7 +1822,7 @@ __STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1725,7 +1830,7 @@ __STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1741,7 +1846,7 @@ __STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1749,7 +1854,7 @@ __STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1765,7 +1870,7 @@ __STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1773,7 +1878,7 @@ __STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1789,7 +1894,7 @@ __STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1797,7 +1902,7 @@ __STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1813,7 +1918,7 @@ __STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1821,7 +1926,7 @@ __STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1829,7 +1934,7 @@ __STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1837,21 +1942,23 @@ __STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) { uint32_t result; - __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + __ASM ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); return(result); } -#define __SSAT16(ARG1,ARG2) \ +#define __SSAT16(ARG1, ARG2) \ +__extension__ \ ({ \ int32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __ASM volatile ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ __RES; \ }) -#define __USAT16(ARG1,ARG2) \ +#define __USAT16(ARG1, ARG2) \ +__extension__ \ ({ \ uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __ASM volatile ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ __RES; \ }) @@ -1859,7 +1966,7 @@ __STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) { uint32_t result; - __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + __ASM ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); return(result); } @@ -1867,7 +1974,7 @@ __STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } @@ -1875,18 +1982,41 @@ __STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) { uint32_t result; - __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + __ASM ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); return(result); } +__STATIC_FORCEINLINE uint32_t __SXTB16_RORn(uint32_t op1, uint32_t rotate) +{ + uint32_t result; + if (__builtin_constant_p(rotate) && ((rotate == 8U) || (rotate == 16U) || (rotate == 24U))) { + __ASM volatile ("sxtb16 %0, %1, ROR %2" : "=r" (result) : "r" (op1), "i" (rotate) ); + } else { + result = __SXTB16(__ROR(op1, rotate)) ; + } + return result; +} + __STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) { uint32_t result; - __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + __ASM ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); return(result); } +__STATIC_FORCEINLINE uint32_t __SXTAB16_RORn(uint32_t op1, uint32_t op2, uint32_t rotate) +{ + uint32_t result; + if (__builtin_constant_p(rotate) && ((rotate == 8U) || (rotate == 16U) || (rotate == 24U))) { + __ASM volatile ("sxtab16 %0, %1, %2, ROR %3" : "=r" (result) : "r" (op1) , "r" (op2) , "i" (rotate)); + } else { + result = __SXTAB16(op1, __ROR(op2, rotate)); + } + return result; +} + + __STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) { uint32_t result; @@ -2043,8 +2173,9 @@ __STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) return(result); } -#if 0 + #define __PKHBT(ARG1,ARG2,ARG3) \ +__extension__ \ ({ \ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ @@ -2052,6 +2183,7 @@ __STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) }) #define __PKHTB(ARG1,ARG2,ARG3) \ +__extension__ \ ({ \ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ if (ARG3 == 0) \ @@ -2060,19 +2192,13 @@ __STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ __RES; \ }) -#endif -#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ - ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) - -#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ - ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) __STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) { int32_t result; - __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + __ASM ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); return(result); } diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_iccarm.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_iccarm.h similarity index 91% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_iccarm.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_iccarm.h index 11c4af0..65b824b 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_iccarm.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -1,13 +1,16 @@ /**************************************************************************//** * @file cmsis_iccarm.h * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file - * @version V5.0.7 - * @date 19. June 2018 + * @version V5.3.0 + * @date 14. April 2021 ******************************************************************************/ //------------------------------------------------------------------------------ // -// Copyright (c) 2017-2018 IAR Systems +// Copyright (c) 2017-2021 IAR Systems +// Copyright (c) 2017-2021 Arm Limited. All rights reserved. +// +// SPDX-License-Identifier: Apache-2.0 // // Licensed under the Apache License, Version 2.0 (the "License") // you may not use this file except in compliance with the License. @@ -110,6 +113,10 @@ #define __ASM __asm #endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + #ifndef __INLINE #define __INLINE inline #endif @@ -150,7 +157,12 @@ #endif #ifndef __RESTRICT - #define __RESTRICT __restrict + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif #endif #ifndef __STATIC_INLINE @@ -226,6 +238,7 @@ __packed struct __iar_u32 { uint32_t v; }; #endif #endif +#undef __WEAK /* undo the definition from DLib_Defaults.h */ #ifndef __WEAK #if __ICCARM_V8 #define __WEAK __attribute__((weak)) @@ -234,6 +247,43 @@ __packed struct __iar_u32 { uint32_t v; }; #endif #endif +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL STACKSEAL$$Base +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif #ifndef __ICCARM_INTRINSICS_VERSION__ #define __ICCARM_INTRINSICS_VERSION__ 0 @@ -305,7 +355,13 @@ __packed struct __iar_u32 { uint32_t v; }; #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) - #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __arm_wsr("CONTROL", control); + __iar_builtin_ISB(); +} + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) @@ -327,7 +383,13 @@ __packed struct __iar_u32 { uint32_t v; }; #endif #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) - #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __arm_wsr("CONTROL_NS", control); + __iar_builtin_ISB(); +} + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) @@ -567,7 +629,7 @@ __packed struct __iar_u32 { uint32_t v; }; __IAR_FT uint32_t __RRX(uint32_t value) { uint32_t result; - __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + __ASM volatile("RRX %0, %1" : "=r"(result) : "r" (value)); return(result); } @@ -649,6 +711,7 @@ __packed struct __iar_u32 { uint32_t v; }; __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) { __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + __iar_builtin_ISB(); } __IAR_FT uint32_t __TZ_get_PSP_NS(void) @@ -806,37 +869,37 @@ __packed struct __iar_u32 { uint32_t v; }; __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) { uint32_t res; - __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + __ASM volatile ("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); return ((uint8_t)res); } __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) { uint32_t res; - __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + __ASM volatile ("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); return ((uint16_t)res); } __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) { uint32_t res; - __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + __ASM volatile ("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); return res; } __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) { - __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + __ASM volatile ("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); } __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) { - __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + __ASM volatile ("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); } __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) { - __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + __ASM volatile ("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); } #endif /* (__CORTEX_M >= 0x03) */ @@ -932,4 +995,8 @@ __packed struct __iar_u32 { uint32_t v; }; #pragma diag_default=Pe940 #pragma diag_default=Pe177 +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + #endif /* __CMSIS_ICCARM_H__ */ diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_version.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_version.h similarity index 89% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_version.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_version.h index 660f612..8b4765f 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/cmsis_version.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/cmsis_version.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file cmsis_version.h * @brief CMSIS Core(M) Version definitions - * @version V5.0.2 - * @date 19. April 2017 + * @version V5.0.5 + * @date 02. February 2022 ******************************************************************************/ /* - * Copyright (c) 2009-2017 ARM Limited. All rights reserved. + * Copyright (c) 2009-2022 ARM Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -33,7 +33,7 @@ /* CMSIS Version definitions */ #define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ -#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION_SUB ( 6U) /*!< [15:0] CMSIS Core(M) sub version */ #define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ #endif diff --git a/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv81mml.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv81mml.h new file mode 100644 index 0000000..94128a1 --- /dev/null +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv81mml.h @@ -0,0 +1,4228 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.4.2 + * @date 13. October 2021 + ******************************************************************************/ +/* + * Copyright (c) 2018-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +#if defined ( __CC_ARM ) + #error Legacy Arm Compiler does not support Armv8.1-M target architecture. +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #if __FPU_PRESENT != 0U + #ifndef __FPU_DP + #define __FPU_DP 0U + #warning "__FPU_DP not defined in device header file; using default!" + #endif + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __PMU_PRESENT + #define __PMU_PRESENT 0U + #warning "__PMU_PRESENT not defined in device header file; using default!" + #endif + + #if __PMU_PRESENT != 0U + #ifndef __PMU_NUM_EVENTCNT + #define __PMU_NUM_EVENTCNT 2U + #warning "__PMU_NUM_EVENTCNT not defined in device header file; using default!" + #elif (__PMU_NUM_EVENTCNT > 31 || __PMU_NUM_EVENTCNT < 2) + #error "__PMU_NUM_EVENTCNT is out of range in device header file!" */ + #endif + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + __IOM uint32_t RFSR; /*!< Offset: 0x204 (R/W) RAS Fault Status Register */ + uint32_t RESERVED4[14U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_IESB_Pos 5U /*!< SCB AIRCR: Implicit ESB Enable Position */ +#define SCB_AIRCR_IESB_Msk (1UL << SCB_AIRCR_IESB_Pos) /*!< SCB AIRCR: Implicit ESB Enable Mask */ + +#define SCB_AIRCR_DIT_Pos 4U /*!< SCB AIRCR: Data Independent Timing Position */ +#define SCB_AIRCR_DIT_Msk (1UL << SCB_AIRCR_DIT_Pos) /*!< SCB AIRCR: Data Independent Timing Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_TRD_Pos 20U /*!< SCB CCR: TRD Position */ +#define SCB_CCR_TRD_Msk (1UL << SCB_CCR_TRD_Pos) /*!< SCB CCR: TRD Mask */ + +#define SCB_CCR_LOB_Pos 19U /*!< SCB CCR: LOB Position */ +#define SCB_CCR_LOB_Msk (1UL << SCB_CCR_LOB_Pos) /*!< SCB CCR: LOB Mask */ + +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_PMU_Pos 5U /*!< SCB DFSR: PMU Position */ +#define SCB_DFSR_PMU_Msk (1UL << SCB_DFSR_PMU_Pos) /*!< SCB DFSR: PMU Mask */ + +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CP7_Pos 7U /*!< SCB NSACR: CP7 Position */ +#define SCB_NSACR_CP7_Msk (1UL << SCB_NSACR_CP7_Pos) /*!< SCB NSACR: CP7 Mask */ + +#define SCB_NSACR_CP6_Pos 6U /*!< SCB NSACR: CP6 Position */ +#define SCB_NSACR_CP6_Msk (1UL << SCB_NSACR_CP6_Pos) /*!< SCB NSACR: CP6 Mask */ + +#define SCB_NSACR_CP5_Pos 5U /*!< SCB NSACR: CP5 Position */ +#define SCB_NSACR_CP5_Msk (1UL << SCB_NSACR_CP5_Pos) /*!< SCB NSACR: CP5 Mask */ + +#define SCB_NSACR_CP4_Pos 4U /*!< SCB NSACR: CP4 Position */ +#define SCB_NSACR_CP4_Msk (1UL << SCB_NSACR_CP4_Pos) /*!< SCB NSACR: CP4 Mask */ + +#define SCB_NSACR_CP3_Pos 3U /*!< SCB NSACR: CP3 Position */ +#define SCB_NSACR_CP3_Msk (1UL << SCB_NSACR_CP3_Pos) /*!< SCB NSACR: CP3 Mask */ + +#define SCB_NSACR_CP2_Pos 2U /*!< SCB NSACR: CP2 Position */ +#define SCB_NSACR_CP2_Msk (1UL << SCB_NSACR_CP2_Pos) /*!< SCB NSACR: CP2 Mask */ + +#define SCB_NSACR_CP1_Pos 1U /*!< SCB NSACR: CP1 Position */ +#define SCB_NSACR_CP1_Msk (1UL << SCB_NSACR_CP1_Pos) /*!< SCB NSACR: CP1 Mask */ + +#define SCB_NSACR_CP0_Pos 0U /*!< SCB NSACR: CP0 Position */ +#define SCB_NSACR_CP0_Msk (1UL /*<< SCB_NSACR_CP0_Pos*/) /*!< SCB NSACR: CP0 Mask */ + +/* SCB Debug Feature Register 0 Definitions */ +#define SCB_ID_DFR_UDE_Pos 28U /*!< SCB ID_DFR: UDE Position */ +#define SCB_ID_DFR_UDE_Msk (0xFUL << SCB_ID_DFR_UDE_Pos) /*!< SCB ID_DFR: UDE Mask */ + +#define SCB_ID_DFR_MProfDbg_Pos 20U /*!< SCB ID_DFR: MProfDbg Position */ +#define SCB_ID_DFR_MProfDbg_Msk (0xFUL << SCB_ID_DFR_MProfDbg_Pos) /*!< SCB ID_DFR: MProfDbg Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB RAS Fault Status Register Definitions */ +#define SCB_RFSR_V_Pos 31U /*!< SCB RFSR: V Position */ +#define SCB_RFSR_V_Msk (1UL << SCB_RFSR_V_Pos) /*!< SCB RFSR: V Mask */ + +#define SCB_RFSR_IS_Pos 16U /*!< SCB RFSR: IS Position */ +#define SCB_RFSR_IS_Msk (0x7FFFUL << SCB_RFSR_IS_Pos) /*!< SCB RFSR: IS Mask */ + +#define SCB_RFSR_UET_Pos 0U /*!< SCB RFSR: UET Position */ +#define SCB_RFSR_UET_Msk (3UL /*<< SCB_RFSR_UET_Pos*/) /*!< SCB RFSR: UET Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[3U]; + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) ITM Device Type Register */ + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFmt_Pos 0U /*!< TPI FFCR: EnFmt Position */ +#define TPI_FFCR_EnFmt_Msk (0x3UL << /*TPI_FFCR_EnFmt_Pos*/) /*!< TPI FFCR: EnFmt Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_PMU Performance Monitoring Unit (PMU) + \brief Type definitions for the Performance Monitoring Unit (PMU) + @{ + */ + +/** + \brief Structure type to access the Performance Monitoring Unit (PMU). + */ +typedef struct +{ + __IOM uint32_t EVCNTR[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x0 (R/W) PMU Event Counter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED0[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCNTR; /*!< Offset: 0x7C (R/W) PMU Cycle Counter Register */ + uint32_t RESERVED1[224]; + __IOM uint32_t EVTYPER[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x400 (R/W) PMU Event Type and Filter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED2[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCFILTR; /*!< Offset: 0x47C (R/W) PMU Cycle Counter Filter Register */ + uint32_t RESERVED3[480]; + __IOM uint32_t CNTENSET; /*!< Offset: 0xC00 (R/W) PMU Count Enable Set Register */ + uint32_t RESERVED4[7]; + __IOM uint32_t CNTENCLR; /*!< Offset: 0xC20 (R/W) PMU Count Enable Clear Register */ + uint32_t RESERVED5[7]; + __IOM uint32_t INTENSET; /*!< Offset: 0xC40 (R/W) PMU Interrupt Enable Set Register */ + uint32_t RESERVED6[7]; + __IOM uint32_t INTENCLR; /*!< Offset: 0xC60 (R/W) PMU Interrupt Enable Clear Register */ + uint32_t RESERVED7[7]; + __IOM uint32_t OVSCLR; /*!< Offset: 0xC80 (R/W) PMU Overflow Flag Status Clear Register */ + uint32_t RESERVED8[7]; + __IOM uint32_t SWINC; /*!< Offset: 0xCA0 (R/W) PMU Software Increment Register */ + uint32_t RESERVED9[7]; + __IOM uint32_t OVSSET; /*!< Offset: 0xCC0 (R/W) PMU Overflow Flag Status Set Register */ + uint32_t RESERVED10[79]; + __IOM uint32_t TYPE; /*!< Offset: 0xE00 (R/W) PMU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0xE04 (R/W) PMU Control Register */ + uint32_t RESERVED11[108]; + __IOM uint32_t AUTHSTATUS; /*!< Offset: 0xFB8 (R/W) PMU Authentication Status Register */ + __IOM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/W) PMU Device Architecture Register */ + uint32_t RESERVED12[3]; + __IOM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/W) PMU Device Type Register */ + __IOM uint32_t PIDR4; /*!< Offset: 0xFD0 (R/W) PMU Peripheral Identification Register 4 */ + uint32_t RESERVED13[3]; + __IOM uint32_t PIDR0; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 0 */ + __IOM uint32_t PIDR1; /*!< Offset: 0xFE4 (R/W) PMU Peripheral Identification Register 1 */ + __IOM uint32_t PIDR2; /*!< Offset: 0xFE8 (R/W) PMU Peripheral Identification Register 2 */ + __IOM uint32_t PIDR3; /*!< Offset: 0xFEC (R/W) PMU Peripheral Identification Register 3 */ + __IOM uint32_t CIDR0; /*!< Offset: 0xFF0 (R/W) PMU Component Identification Register 0 */ + __IOM uint32_t CIDR1; /*!< Offset: 0xFF4 (R/W) PMU Component Identification Register 1 */ + __IOM uint32_t CIDR2; /*!< Offset: 0xFF8 (R/W) PMU Component Identification Register 2 */ + __IOM uint32_t CIDR3; /*!< Offset: 0xFFC (R/W) PMU Component Identification Register 3 */ +} PMU_Type; + +/** \brief PMU Event Counter Registers (0-30) Definitions */ + +#define PMU_EVCNTR_CNT_Pos 0U /*!< PMU EVCNTR: Counter Position */ +#define PMU_EVCNTR_CNT_Msk (0xFFFFUL /*<< PMU_EVCNTRx_CNT_Pos*/) /*!< PMU EVCNTR: Counter Mask */ + +/** \brief PMU Event Type and Filter Registers (0-30) Definitions */ + +#define PMU_EVTYPER_EVENTTOCNT_Pos 0U /*!< PMU EVTYPER: Event to Count Position */ +#define PMU_EVTYPER_EVENTTOCNT_Msk (0xFFFFUL /*<< EVTYPERx_EVENTTOCNT_Pos*/) /*!< PMU EVTYPER: Event to Count Mask */ + +/** \brief PMU Count Enable Set Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENSET: Event Counter 0 Enable Set Position */ +#define PMU_CNTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENSET_CNT0_ENABLE_Pos*/) /*!< PMU CNTENSET: Event Counter 0 Enable Set Mask */ + +#define PMU_CNTENSET_CNT1_ENABLE_Pos 1U /*!< PMU CNTENSET: Event Counter 1 Enable Set Position */ +#define PMU_CNTENSET_CNT1_ENABLE_Msk (1UL << PMU_CNTENSET_CNT1_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 1 Enable Set Mask */ + +#define PMU_CNTENSET_CNT2_ENABLE_Pos 2U /*!< PMU CNTENSET: Event Counter 2 Enable Set Position */ +#define PMU_CNTENSET_CNT2_ENABLE_Msk (1UL << PMU_CNTENSET_CNT2_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 2 Enable Set Mask */ + +#define PMU_CNTENSET_CNT3_ENABLE_Pos 3U /*!< PMU CNTENSET: Event Counter 3 Enable Set Position */ +#define PMU_CNTENSET_CNT3_ENABLE_Msk (1UL << PMU_CNTENSET_CNT3_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 3 Enable Set Mask */ + +#define PMU_CNTENSET_CNT4_ENABLE_Pos 4U /*!< PMU CNTENSET: Event Counter 4 Enable Set Position */ +#define PMU_CNTENSET_CNT4_ENABLE_Msk (1UL << PMU_CNTENSET_CNT4_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 4 Enable Set Mask */ + +#define PMU_CNTENSET_CNT5_ENABLE_Pos 5U /*!< PMU CNTENSET: Event Counter 5 Enable Set Position */ +#define PMU_CNTENSET_CNT5_ENABLE_Msk (1UL << PMU_CNTENSET_CNT5_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 5 Enable Set Mask */ + +#define PMU_CNTENSET_CNT6_ENABLE_Pos 6U /*!< PMU CNTENSET: Event Counter 6 Enable Set Position */ +#define PMU_CNTENSET_CNT6_ENABLE_Msk (1UL << PMU_CNTENSET_CNT6_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 6 Enable Set Mask */ + +#define PMU_CNTENSET_CNT7_ENABLE_Pos 7U /*!< PMU CNTENSET: Event Counter 7 Enable Set Position */ +#define PMU_CNTENSET_CNT7_ENABLE_Msk (1UL << PMU_CNTENSET_CNT7_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 7 Enable Set Mask */ + +#define PMU_CNTENSET_CNT8_ENABLE_Pos 8U /*!< PMU CNTENSET: Event Counter 8 Enable Set Position */ +#define PMU_CNTENSET_CNT8_ENABLE_Msk (1UL << PMU_CNTENSET_CNT8_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 8 Enable Set Mask */ + +#define PMU_CNTENSET_CNT9_ENABLE_Pos 9U /*!< PMU CNTENSET: Event Counter 9 Enable Set Position */ +#define PMU_CNTENSET_CNT9_ENABLE_Msk (1UL << PMU_CNTENSET_CNT9_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 9 Enable Set Mask */ + +#define PMU_CNTENSET_CNT10_ENABLE_Pos 10U /*!< PMU CNTENSET: Event Counter 10 Enable Set Position */ +#define PMU_CNTENSET_CNT10_ENABLE_Msk (1UL << PMU_CNTENSET_CNT10_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 10 Enable Set Mask */ + +#define PMU_CNTENSET_CNT11_ENABLE_Pos 11U /*!< PMU CNTENSET: Event Counter 11 Enable Set Position */ +#define PMU_CNTENSET_CNT11_ENABLE_Msk (1UL << PMU_CNTENSET_CNT11_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 11 Enable Set Mask */ + +#define PMU_CNTENSET_CNT12_ENABLE_Pos 12U /*!< PMU CNTENSET: Event Counter 12 Enable Set Position */ +#define PMU_CNTENSET_CNT12_ENABLE_Msk (1UL << PMU_CNTENSET_CNT12_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 12 Enable Set Mask */ + +#define PMU_CNTENSET_CNT13_ENABLE_Pos 13U /*!< PMU CNTENSET: Event Counter 13 Enable Set Position */ +#define PMU_CNTENSET_CNT13_ENABLE_Msk (1UL << PMU_CNTENSET_CNT13_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 13 Enable Set Mask */ + +#define PMU_CNTENSET_CNT14_ENABLE_Pos 14U /*!< PMU CNTENSET: Event Counter 14 Enable Set Position */ +#define PMU_CNTENSET_CNT14_ENABLE_Msk (1UL << PMU_CNTENSET_CNT14_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 14 Enable Set Mask */ + +#define PMU_CNTENSET_CNT15_ENABLE_Pos 15U /*!< PMU CNTENSET: Event Counter 15 Enable Set Position */ +#define PMU_CNTENSET_CNT15_ENABLE_Msk (1UL << PMU_CNTENSET_CNT15_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 15 Enable Set Mask */ + +#define PMU_CNTENSET_CNT16_ENABLE_Pos 16U /*!< PMU CNTENSET: Event Counter 16 Enable Set Position */ +#define PMU_CNTENSET_CNT16_ENABLE_Msk (1UL << PMU_CNTENSET_CNT16_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 16 Enable Set Mask */ + +#define PMU_CNTENSET_CNT17_ENABLE_Pos 17U /*!< PMU CNTENSET: Event Counter 17 Enable Set Position */ +#define PMU_CNTENSET_CNT17_ENABLE_Msk (1UL << PMU_CNTENSET_CNT17_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 17 Enable Set Mask */ + +#define PMU_CNTENSET_CNT18_ENABLE_Pos 18U /*!< PMU CNTENSET: Event Counter 18 Enable Set Position */ +#define PMU_CNTENSET_CNT18_ENABLE_Msk (1UL << PMU_CNTENSET_CNT18_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 18 Enable Set Mask */ + +#define PMU_CNTENSET_CNT19_ENABLE_Pos 19U /*!< PMU CNTENSET: Event Counter 19 Enable Set Position */ +#define PMU_CNTENSET_CNT19_ENABLE_Msk (1UL << PMU_CNTENSET_CNT19_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 19 Enable Set Mask */ + +#define PMU_CNTENSET_CNT20_ENABLE_Pos 20U /*!< PMU CNTENSET: Event Counter 20 Enable Set Position */ +#define PMU_CNTENSET_CNT20_ENABLE_Msk (1UL << PMU_CNTENSET_CNT20_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 20 Enable Set Mask */ + +#define PMU_CNTENSET_CNT21_ENABLE_Pos 21U /*!< PMU CNTENSET: Event Counter 21 Enable Set Position */ +#define PMU_CNTENSET_CNT21_ENABLE_Msk (1UL << PMU_CNTENSET_CNT21_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 21 Enable Set Mask */ + +#define PMU_CNTENSET_CNT22_ENABLE_Pos 22U /*!< PMU CNTENSET: Event Counter 22 Enable Set Position */ +#define PMU_CNTENSET_CNT22_ENABLE_Msk (1UL << PMU_CNTENSET_CNT22_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 22 Enable Set Mask */ + +#define PMU_CNTENSET_CNT23_ENABLE_Pos 23U /*!< PMU CNTENSET: Event Counter 23 Enable Set Position */ +#define PMU_CNTENSET_CNT23_ENABLE_Msk (1UL << PMU_CNTENSET_CNT23_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 23 Enable Set Mask */ + +#define PMU_CNTENSET_CNT24_ENABLE_Pos 24U /*!< PMU CNTENSET: Event Counter 24 Enable Set Position */ +#define PMU_CNTENSET_CNT24_ENABLE_Msk (1UL << PMU_CNTENSET_CNT24_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 24 Enable Set Mask */ + +#define PMU_CNTENSET_CNT25_ENABLE_Pos 25U /*!< PMU CNTENSET: Event Counter 25 Enable Set Position */ +#define PMU_CNTENSET_CNT25_ENABLE_Msk (1UL << PMU_CNTENSET_CNT25_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 25 Enable Set Mask */ + +#define PMU_CNTENSET_CNT26_ENABLE_Pos 26U /*!< PMU CNTENSET: Event Counter 26 Enable Set Position */ +#define PMU_CNTENSET_CNT26_ENABLE_Msk (1UL << PMU_CNTENSET_CNT26_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 26 Enable Set Mask */ + +#define PMU_CNTENSET_CNT27_ENABLE_Pos 27U /*!< PMU CNTENSET: Event Counter 27 Enable Set Position */ +#define PMU_CNTENSET_CNT27_ENABLE_Msk (1UL << PMU_CNTENSET_CNT27_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 27 Enable Set Mask */ + +#define PMU_CNTENSET_CNT28_ENABLE_Pos 28U /*!< PMU CNTENSET: Event Counter 28 Enable Set Position */ +#define PMU_CNTENSET_CNT28_ENABLE_Msk (1UL << PMU_CNTENSET_CNT28_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 28 Enable Set Mask */ + +#define PMU_CNTENSET_CNT29_ENABLE_Pos 29U /*!< PMU CNTENSET: Event Counter 29 Enable Set Position */ +#define PMU_CNTENSET_CNT29_ENABLE_Msk (1UL << PMU_CNTENSET_CNT29_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 29 Enable Set Mask */ + +#define PMU_CNTENSET_CNT30_ENABLE_Pos 30U /*!< PMU CNTENSET: Event Counter 30 Enable Set Position */ +#define PMU_CNTENSET_CNT30_ENABLE_Msk (1UL << PMU_CNTENSET_CNT30_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 30 Enable Set Mask */ + +#define PMU_CNTENSET_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENSET: Cycle Counter Enable Set Position */ +#define PMU_CNTENSET_CCNTR_ENABLE_Msk (1UL << PMU_CNTENSET_CCNTR_ENABLE_Pos) /*!< PMU CNTENSET: Cycle Counter Enable Set Mask */ + +/** \brief PMU Count Enable Clear Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Position */ +#define PMU_CNTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU CNTENCLR: Event Counter 1 Enable Clear Position */ +#define PMU_CNTENCLR_CNT1_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT1_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 1 Enable Clear */ + +#define PMU_CNTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Position */ +#define PMU_CNTENCLR_CNT2_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT2_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Position */ +#define PMU_CNTENCLR_CNT3_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT3_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Position */ +#define PMU_CNTENCLR_CNT4_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT4_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Position */ +#define PMU_CNTENCLR_CNT5_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT5_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Position */ +#define PMU_CNTENCLR_CNT6_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT6_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Position */ +#define PMU_CNTENCLR_CNT7_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT7_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Position */ +#define PMU_CNTENCLR_CNT8_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT8_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Position */ +#define PMU_CNTENCLR_CNT9_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT9_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Position */ +#define PMU_CNTENCLR_CNT10_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT10_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Position */ +#define PMU_CNTENCLR_CNT11_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT11_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Position */ +#define PMU_CNTENCLR_CNT12_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT12_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Position */ +#define PMU_CNTENCLR_CNT13_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT13_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Position */ +#define PMU_CNTENCLR_CNT14_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT14_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Position */ +#define PMU_CNTENCLR_CNT15_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT15_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Position */ +#define PMU_CNTENCLR_CNT16_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT16_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Position */ +#define PMU_CNTENCLR_CNT17_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT17_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Position */ +#define PMU_CNTENCLR_CNT18_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT18_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Position */ +#define PMU_CNTENCLR_CNT19_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT19_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Position */ +#define PMU_CNTENCLR_CNT20_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT20_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Position */ +#define PMU_CNTENCLR_CNT21_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT21_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Position */ +#define PMU_CNTENCLR_CNT22_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT22_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Position */ +#define PMU_CNTENCLR_CNT23_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT23_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Position */ +#define PMU_CNTENCLR_CNT24_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT24_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Position */ +#define PMU_CNTENCLR_CNT25_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT25_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Position */ +#define PMU_CNTENCLR_CNT26_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT26_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Position */ +#define PMU_CNTENCLR_CNT27_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT27_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Position */ +#define PMU_CNTENCLR_CNT28_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT28_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Position */ +#define PMU_CNTENCLR_CNT29_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT29_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Position */ +#define PMU_CNTENCLR_CNT30_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT30_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Mask */ + +#define PMU_CNTENCLR_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENCLR: Cycle Counter Enable Clear Position */ +#define PMU_CNTENCLR_CCNTR_ENABLE_Msk (1UL << PMU_CNTENCLR_CCNTR_ENABLE_Pos) /*!< PMU CNTENCLR: Cycle Counter Enable Clear Mask */ + +/** \brief PMU Interrupt Enable Set Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENSET_CNT0_ENABLE_Pos*/) /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT1_ENABLE_Pos 1U /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT1_ENABLE_Msk (1UL << PMU_INTENSET_CNT1_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT2_ENABLE_Pos 2U /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT2_ENABLE_Msk (1UL << PMU_INTENSET_CNT2_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT3_ENABLE_Pos 3U /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT3_ENABLE_Msk (1UL << PMU_INTENSET_CNT3_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT4_ENABLE_Pos 4U /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT4_ENABLE_Msk (1UL << PMU_INTENSET_CNT4_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT5_ENABLE_Pos 5U /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT5_ENABLE_Msk (1UL << PMU_INTENSET_CNT5_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT6_ENABLE_Pos 6U /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT6_ENABLE_Msk (1UL << PMU_INTENSET_CNT6_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT7_ENABLE_Pos 7U /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT7_ENABLE_Msk (1UL << PMU_INTENSET_CNT7_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT8_ENABLE_Pos 8U /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT8_ENABLE_Msk (1UL << PMU_INTENSET_CNT8_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT9_ENABLE_Pos 9U /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT9_ENABLE_Msk (1UL << PMU_INTENSET_CNT9_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT10_ENABLE_Pos 10U /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT10_ENABLE_Msk (1UL << PMU_INTENSET_CNT10_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT11_ENABLE_Pos 11U /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT11_ENABLE_Msk (1UL << PMU_INTENSET_CNT11_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT12_ENABLE_Pos 12U /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT12_ENABLE_Msk (1UL << PMU_INTENSET_CNT12_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT13_ENABLE_Pos 13U /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT13_ENABLE_Msk (1UL << PMU_INTENSET_CNT13_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT14_ENABLE_Pos 14U /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT14_ENABLE_Msk (1UL << PMU_INTENSET_CNT14_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT15_ENABLE_Pos 15U /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT15_ENABLE_Msk (1UL << PMU_INTENSET_CNT15_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT16_ENABLE_Pos 16U /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT16_ENABLE_Msk (1UL << PMU_INTENSET_CNT16_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT17_ENABLE_Pos 17U /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT17_ENABLE_Msk (1UL << PMU_INTENSET_CNT17_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT18_ENABLE_Pos 18U /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT18_ENABLE_Msk (1UL << PMU_INTENSET_CNT18_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT19_ENABLE_Pos 19U /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT19_ENABLE_Msk (1UL << PMU_INTENSET_CNT19_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT20_ENABLE_Pos 20U /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT20_ENABLE_Msk (1UL << PMU_INTENSET_CNT20_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT21_ENABLE_Pos 21U /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT21_ENABLE_Msk (1UL << PMU_INTENSET_CNT21_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT22_ENABLE_Pos 22U /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT22_ENABLE_Msk (1UL << PMU_INTENSET_CNT22_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT23_ENABLE_Pos 23U /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT23_ENABLE_Msk (1UL << PMU_INTENSET_CNT23_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT24_ENABLE_Pos 24U /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT24_ENABLE_Msk (1UL << PMU_INTENSET_CNT24_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT25_ENABLE_Pos 25U /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT25_ENABLE_Msk (1UL << PMU_INTENSET_CNT25_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT26_ENABLE_Pos 26U /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT26_ENABLE_Msk (1UL << PMU_INTENSET_CNT26_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT27_ENABLE_Pos 27U /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT27_ENABLE_Msk (1UL << PMU_INTENSET_CNT27_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT28_ENABLE_Pos 28U /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT28_ENABLE_Msk (1UL << PMU_INTENSET_CNT28_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT29_ENABLE_Pos 29U /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT29_ENABLE_Msk (1UL << PMU_INTENSET_CNT29_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT30_ENABLE_Pos 30U /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT30_ENABLE_Msk (1UL << PMU_INTENSET_CNT30_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Position */ +#define PMU_INTENSET_CCYCNT_ENABLE_Msk (1UL << PMU_INTENSET_CYCCNT_ENABLE_Pos) /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Mask */ + +/** \brief PMU Interrupt Enable Clear Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT1_ENABLE_Msk (1UL << PMU_INTENCLR_CNT1_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear */ + +#define PMU_INTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT2_ENABLE_Msk (1UL << PMU_INTENCLR_CNT2_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT3_ENABLE_Msk (1UL << PMU_INTENCLR_CNT3_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT4_ENABLE_Msk (1UL << PMU_INTENCLR_CNT4_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT5_ENABLE_Msk (1UL << PMU_INTENCLR_CNT5_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT6_ENABLE_Msk (1UL << PMU_INTENCLR_CNT6_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT7_ENABLE_Msk (1UL << PMU_INTENCLR_CNT7_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT8_ENABLE_Msk (1UL << PMU_INTENCLR_CNT8_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT9_ENABLE_Msk (1UL << PMU_INTENCLR_CNT9_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT10_ENABLE_Msk (1UL << PMU_INTENCLR_CNT10_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT11_ENABLE_Msk (1UL << PMU_INTENCLR_CNT11_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT12_ENABLE_Msk (1UL << PMU_INTENCLR_CNT12_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT13_ENABLE_Msk (1UL << PMU_INTENCLR_CNT13_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT14_ENABLE_Msk (1UL << PMU_INTENCLR_CNT14_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT15_ENABLE_Msk (1UL << PMU_INTENCLR_CNT15_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT16_ENABLE_Msk (1UL << PMU_INTENCLR_CNT16_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT17_ENABLE_Msk (1UL << PMU_INTENCLR_CNT17_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT18_ENABLE_Msk (1UL << PMU_INTENCLR_CNT18_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT19_ENABLE_Msk (1UL << PMU_INTENCLR_CNT19_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT20_ENABLE_Msk (1UL << PMU_INTENCLR_CNT20_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT21_ENABLE_Msk (1UL << PMU_INTENCLR_CNT21_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT22_ENABLE_Msk (1UL << PMU_INTENCLR_CNT22_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT23_ENABLE_Msk (1UL << PMU_INTENCLR_CNT23_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT24_ENABLE_Msk (1UL << PMU_INTENCLR_CNT24_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT25_ENABLE_Msk (1UL << PMU_INTENCLR_CNT25_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT26_ENABLE_Msk (1UL << PMU_INTENCLR_CNT26_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT27_ENABLE_Msk (1UL << PMU_INTENCLR_CNT27_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT28_ENABLE_Msk (1UL << PMU_INTENCLR_CNT28_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT29_ENABLE_Msk (1UL << PMU_INTENCLR_CNT29_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT30_ENABLE_Msk (1UL << PMU_INTENCLR_CNT30_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CYCCNT_ENABLE_Msk (1UL << PMU_INTENCLR_CYCCNT_ENABLE_Pos) /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Mask */ + +/** \brief PMU Overflow Flag Status Set Register Definitions */ + +#define PMU_OVSSET_CNT0_STATUS_Pos 0U /*!< PMU OVSSET: Event Counter 0 Overflow Set Position */ +#define PMU_OVSSET_CNT0_STATUS_Msk (1UL /*<< PMU_OVSSET_CNT0_STATUS_Pos*/) /*!< PMU OVSSET: Event Counter 0 Overflow Set Mask */ + +#define PMU_OVSSET_CNT1_STATUS_Pos 1U /*!< PMU OVSSET: Event Counter 1 Overflow Set Position */ +#define PMU_OVSSET_CNT1_STATUS_Msk (1UL << PMU_OVSSET_CNT1_STATUS_Pos) /*!< PMU OVSSET: Event Counter 1 Overflow Set Mask */ + +#define PMU_OVSSET_CNT2_STATUS_Pos 2U /*!< PMU OVSSET: Event Counter 2 Overflow Set Position */ +#define PMU_OVSSET_CNT2_STATUS_Msk (1UL << PMU_OVSSET_CNT2_STATUS_Pos) /*!< PMU OVSSET: Event Counter 2 Overflow Set Mask */ + +#define PMU_OVSSET_CNT3_STATUS_Pos 3U /*!< PMU OVSSET: Event Counter 3 Overflow Set Position */ +#define PMU_OVSSET_CNT3_STATUS_Msk (1UL << PMU_OVSSET_CNT3_STATUS_Pos) /*!< PMU OVSSET: Event Counter 3 Overflow Set Mask */ + +#define PMU_OVSSET_CNT4_STATUS_Pos 4U /*!< PMU OVSSET: Event Counter 4 Overflow Set Position */ +#define PMU_OVSSET_CNT4_STATUS_Msk (1UL << PMU_OVSSET_CNT4_STATUS_Pos) /*!< PMU OVSSET: Event Counter 4 Overflow Set Mask */ + +#define PMU_OVSSET_CNT5_STATUS_Pos 5U /*!< PMU OVSSET: Event Counter 5 Overflow Set Position */ +#define PMU_OVSSET_CNT5_STATUS_Msk (1UL << PMU_OVSSET_CNT5_STATUS_Pos) /*!< PMU OVSSET: Event Counter 5 Overflow Set Mask */ + +#define PMU_OVSSET_CNT6_STATUS_Pos 6U /*!< PMU OVSSET: Event Counter 6 Overflow Set Position */ +#define PMU_OVSSET_CNT6_STATUS_Msk (1UL << PMU_OVSSET_CNT6_STATUS_Pos) /*!< PMU OVSSET: Event Counter 6 Overflow Set Mask */ + +#define PMU_OVSSET_CNT7_STATUS_Pos 7U /*!< PMU OVSSET: Event Counter 7 Overflow Set Position */ +#define PMU_OVSSET_CNT7_STATUS_Msk (1UL << PMU_OVSSET_CNT7_STATUS_Pos) /*!< PMU OVSSET: Event Counter 7 Overflow Set Mask */ + +#define PMU_OVSSET_CNT8_STATUS_Pos 8U /*!< PMU OVSSET: Event Counter 8 Overflow Set Position */ +#define PMU_OVSSET_CNT8_STATUS_Msk (1UL << PMU_OVSSET_CNT8_STATUS_Pos) /*!< PMU OVSSET: Event Counter 8 Overflow Set Mask */ + +#define PMU_OVSSET_CNT9_STATUS_Pos 9U /*!< PMU OVSSET: Event Counter 9 Overflow Set Position */ +#define PMU_OVSSET_CNT9_STATUS_Msk (1UL << PMU_OVSSET_CNT9_STATUS_Pos) /*!< PMU OVSSET: Event Counter 9 Overflow Set Mask */ + +#define PMU_OVSSET_CNT10_STATUS_Pos 10U /*!< PMU OVSSET: Event Counter 10 Overflow Set Position */ +#define PMU_OVSSET_CNT10_STATUS_Msk (1UL << PMU_OVSSET_CNT10_STATUS_Pos) /*!< PMU OVSSET: Event Counter 10 Overflow Set Mask */ + +#define PMU_OVSSET_CNT11_STATUS_Pos 11U /*!< PMU OVSSET: Event Counter 11 Overflow Set Position */ +#define PMU_OVSSET_CNT11_STATUS_Msk (1UL << PMU_OVSSET_CNT11_STATUS_Pos) /*!< PMU OVSSET: Event Counter 11 Overflow Set Mask */ + +#define PMU_OVSSET_CNT12_STATUS_Pos 12U /*!< PMU OVSSET: Event Counter 12 Overflow Set Position */ +#define PMU_OVSSET_CNT12_STATUS_Msk (1UL << PMU_OVSSET_CNT12_STATUS_Pos) /*!< PMU OVSSET: Event Counter 12 Overflow Set Mask */ + +#define PMU_OVSSET_CNT13_STATUS_Pos 13U /*!< PMU OVSSET: Event Counter 13 Overflow Set Position */ +#define PMU_OVSSET_CNT13_STATUS_Msk (1UL << PMU_OVSSET_CNT13_STATUS_Pos) /*!< PMU OVSSET: Event Counter 13 Overflow Set Mask */ + +#define PMU_OVSSET_CNT14_STATUS_Pos 14U /*!< PMU OVSSET: Event Counter 14 Overflow Set Position */ +#define PMU_OVSSET_CNT14_STATUS_Msk (1UL << PMU_OVSSET_CNT14_STATUS_Pos) /*!< PMU OVSSET: Event Counter 14 Overflow Set Mask */ + +#define PMU_OVSSET_CNT15_STATUS_Pos 15U /*!< PMU OVSSET: Event Counter 15 Overflow Set Position */ +#define PMU_OVSSET_CNT15_STATUS_Msk (1UL << PMU_OVSSET_CNT15_STATUS_Pos) /*!< PMU OVSSET: Event Counter 15 Overflow Set Mask */ + +#define PMU_OVSSET_CNT16_STATUS_Pos 16U /*!< PMU OVSSET: Event Counter 16 Overflow Set Position */ +#define PMU_OVSSET_CNT16_STATUS_Msk (1UL << PMU_OVSSET_CNT16_STATUS_Pos) /*!< PMU OVSSET: Event Counter 16 Overflow Set Mask */ + +#define PMU_OVSSET_CNT17_STATUS_Pos 17U /*!< PMU OVSSET: Event Counter 17 Overflow Set Position */ +#define PMU_OVSSET_CNT17_STATUS_Msk (1UL << PMU_OVSSET_CNT17_STATUS_Pos) /*!< PMU OVSSET: Event Counter 17 Overflow Set Mask */ + +#define PMU_OVSSET_CNT18_STATUS_Pos 18U /*!< PMU OVSSET: Event Counter 18 Overflow Set Position */ +#define PMU_OVSSET_CNT18_STATUS_Msk (1UL << PMU_OVSSET_CNT18_STATUS_Pos) /*!< PMU OVSSET: Event Counter 18 Overflow Set Mask */ + +#define PMU_OVSSET_CNT19_STATUS_Pos 19U /*!< PMU OVSSET: Event Counter 19 Overflow Set Position */ +#define PMU_OVSSET_CNT19_STATUS_Msk (1UL << PMU_OVSSET_CNT19_STATUS_Pos) /*!< PMU OVSSET: Event Counter 19 Overflow Set Mask */ + +#define PMU_OVSSET_CNT20_STATUS_Pos 20U /*!< PMU OVSSET: Event Counter 20 Overflow Set Position */ +#define PMU_OVSSET_CNT20_STATUS_Msk (1UL << PMU_OVSSET_CNT20_STATUS_Pos) /*!< PMU OVSSET: Event Counter 20 Overflow Set Mask */ + +#define PMU_OVSSET_CNT21_STATUS_Pos 21U /*!< PMU OVSSET: Event Counter 21 Overflow Set Position */ +#define PMU_OVSSET_CNT21_STATUS_Msk (1UL << PMU_OVSSET_CNT21_STATUS_Pos) /*!< PMU OVSSET: Event Counter 21 Overflow Set Mask */ + +#define PMU_OVSSET_CNT22_STATUS_Pos 22U /*!< PMU OVSSET: Event Counter 22 Overflow Set Position */ +#define PMU_OVSSET_CNT22_STATUS_Msk (1UL << PMU_OVSSET_CNT22_STATUS_Pos) /*!< PMU OVSSET: Event Counter 22 Overflow Set Mask */ + +#define PMU_OVSSET_CNT23_STATUS_Pos 23U /*!< PMU OVSSET: Event Counter 23 Overflow Set Position */ +#define PMU_OVSSET_CNT23_STATUS_Msk (1UL << PMU_OVSSET_CNT23_STATUS_Pos) /*!< PMU OVSSET: Event Counter 23 Overflow Set Mask */ + +#define PMU_OVSSET_CNT24_STATUS_Pos 24U /*!< PMU OVSSET: Event Counter 24 Overflow Set Position */ +#define PMU_OVSSET_CNT24_STATUS_Msk (1UL << PMU_OVSSET_CNT24_STATUS_Pos) /*!< PMU OVSSET: Event Counter 24 Overflow Set Mask */ + +#define PMU_OVSSET_CNT25_STATUS_Pos 25U /*!< PMU OVSSET: Event Counter 25 Overflow Set Position */ +#define PMU_OVSSET_CNT25_STATUS_Msk (1UL << PMU_OVSSET_CNT25_STATUS_Pos) /*!< PMU OVSSET: Event Counter 25 Overflow Set Mask */ + +#define PMU_OVSSET_CNT26_STATUS_Pos 26U /*!< PMU OVSSET: Event Counter 26 Overflow Set Position */ +#define PMU_OVSSET_CNT26_STATUS_Msk (1UL << PMU_OVSSET_CNT26_STATUS_Pos) /*!< PMU OVSSET: Event Counter 26 Overflow Set Mask */ + +#define PMU_OVSSET_CNT27_STATUS_Pos 27U /*!< PMU OVSSET: Event Counter 27 Overflow Set Position */ +#define PMU_OVSSET_CNT27_STATUS_Msk (1UL << PMU_OVSSET_CNT27_STATUS_Pos) /*!< PMU OVSSET: Event Counter 27 Overflow Set Mask */ + +#define PMU_OVSSET_CNT28_STATUS_Pos 28U /*!< PMU OVSSET: Event Counter 28 Overflow Set Position */ +#define PMU_OVSSET_CNT28_STATUS_Msk (1UL << PMU_OVSSET_CNT28_STATUS_Pos) /*!< PMU OVSSET: Event Counter 28 Overflow Set Mask */ + +#define PMU_OVSSET_CNT29_STATUS_Pos 29U /*!< PMU OVSSET: Event Counter 29 Overflow Set Position */ +#define PMU_OVSSET_CNT29_STATUS_Msk (1UL << PMU_OVSSET_CNT29_STATUS_Pos) /*!< PMU OVSSET: Event Counter 29 Overflow Set Mask */ + +#define PMU_OVSSET_CNT30_STATUS_Pos 30U /*!< PMU OVSSET: Event Counter 30 Overflow Set Position */ +#define PMU_OVSSET_CNT30_STATUS_Msk (1UL << PMU_OVSSET_CNT30_STATUS_Pos) /*!< PMU OVSSET: Event Counter 30 Overflow Set Mask */ + +#define PMU_OVSSET_CYCCNT_STATUS_Pos 31U /*!< PMU OVSSET: Cycle Counter Overflow Set Position */ +#define PMU_OVSSET_CYCCNT_STATUS_Msk (1UL << PMU_OVSSET_CYCCNT_STATUS_Pos) /*!< PMU OVSSET: Cycle Counter Overflow Set Mask */ + +/** \brief PMU Overflow Flag Status Clear Register Definitions */ + +#define PMU_OVSCLR_CNT0_STATUS_Pos 0U /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Position */ +#define PMU_OVSCLR_CNT0_STATUS_Msk (1UL /*<< PMU_OVSCLR_CNT0_STATUS_Pos*/) /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT1_STATUS_Pos 1U /*!< PMU OVSCLR: Event Counter 1 Overflow Clear Position */ +#define PMU_OVSCLR_CNT1_STATUS_Msk (1UL << PMU_OVSCLR_CNT1_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 1 Overflow Clear */ + +#define PMU_OVSCLR_CNT2_STATUS_Pos 2U /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Position */ +#define PMU_OVSCLR_CNT2_STATUS_Msk (1UL << PMU_OVSCLR_CNT2_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT3_STATUS_Pos 3U /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Position */ +#define PMU_OVSCLR_CNT3_STATUS_Msk (1UL << PMU_OVSCLR_CNT3_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT4_STATUS_Pos 4U /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Position */ +#define PMU_OVSCLR_CNT4_STATUS_Msk (1UL << PMU_OVSCLR_CNT4_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT5_STATUS_Pos 5U /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Position */ +#define PMU_OVSCLR_CNT5_STATUS_Msk (1UL << PMU_OVSCLR_CNT5_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT6_STATUS_Pos 6U /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Position */ +#define PMU_OVSCLR_CNT6_STATUS_Msk (1UL << PMU_OVSCLR_CNT6_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT7_STATUS_Pos 7U /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Position */ +#define PMU_OVSCLR_CNT7_STATUS_Msk (1UL << PMU_OVSCLR_CNT7_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT8_STATUS_Pos 8U /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Position */ +#define PMU_OVSCLR_CNT8_STATUS_Msk (1UL << PMU_OVSCLR_CNT8_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT9_STATUS_Pos 9U /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Position */ +#define PMU_OVSCLR_CNT9_STATUS_Msk (1UL << PMU_OVSCLR_CNT9_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT10_STATUS_Pos 10U /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Position */ +#define PMU_OVSCLR_CNT10_STATUS_Msk (1UL << PMU_OVSCLR_CNT10_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT11_STATUS_Pos 11U /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Position */ +#define PMU_OVSCLR_CNT11_STATUS_Msk (1UL << PMU_OVSCLR_CNT11_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT12_STATUS_Pos 12U /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Position */ +#define PMU_OVSCLR_CNT12_STATUS_Msk (1UL << PMU_OVSCLR_CNT12_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT13_STATUS_Pos 13U /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Position */ +#define PMU_OVSCLR_CNT13_STATUS_Msk (1UL << PMU_OVSCLR_CNT13_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT14_STATUS_Pos 14U /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Position */ +#define PMU_OVSCLR_CNT14_STATUS_Msk (1UL << PMU_OVSCLR_CNT14_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT15_STATUS_Pos 15U /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Position */ +#define PMU_OVSCLR_CNT15_STATUS_Msk (1UL << PMU_OVSCLR_CNT15_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT16_STATUS_Pos 16U /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Position */ +#define PMU_OVSCLR_CNT16_STATUS_Msk (1UL << PMU_OVSCLR_CNT16_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT17_STATUS_Pos 17U /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Position */ +#define PMU_OVSCLR_CNT17_STATUS_Msk (1UL << PMU_OVSCLR_CNT17_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT18_STATUS_Pos 18U /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Position */ +#define PMU_OVSCLR_CNT18_STATUS_Msk (1UL << PMU_OVSCLR_CNT18_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT19_STATUS_Pos 19U /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Position */ +#define PMU_OVSCLR_CNT19_STATUS_Msk (1UL << PMU_OVSCLR_CNT19_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT20_STATUS_Pos 20U /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Position */ +#define PMU_OVSCLR_CNT20_STATUS_Msk (1UL << PMU_OVSCLR_CNT20_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT21_STATUS_Pos 21U /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Position */ +#define PMU_OVSCLR_CNT21_STATUS_Msk (1UL << PMU_OVSCLR_CNT21_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT22_STATUS_Pos 22U /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Position */ +#define PMU_OVSCLR_CNT22_STATUS_Msk (1UL << PMU_OVSCLR_CNT22_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT23_STATUS_Pos 23U /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Position */ +#define PMU_OVSCLR_CNT23_STATUS_Msk (1UL << PMU_OVSCLR_CNT23_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT24_STATUS_Pos 24U /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Position */ +#define PMU_OVSCLR_CNT24_STATUS_Msk (1UL << PMU_OVSCLR_CNT24_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT25_STATUS_Pos 25U /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Position */ +#define PMU_OVSCLR_CNT25_STATUS_Msk (1UL << PMU_OVSCLR_CNT25_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT26_STATUS_Pos 26U /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Position */ +#define PMU_OVSCLR_CNT26_STATUS_Msk (1UL << PMU_OVSCLR_CNT26_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT27_STATUS_Pos 27U /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Position */ +#define PMU_OVSCLR_CNT27_STATUS_Msk (1UL << PMU_OVSCLR_CNT27_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT28_STATUS_Pos 28U /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Position */ +#define PMU_OVSCLR_CNT28_STATUS_Msk (1UL << PMU_OVSCLR_CNT28_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT29_STATUS_Pos 29U /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Position */ +#define PMU_OVSCLR_CNT29_STATUS_Msk (1UL << PMU_OVSCLR_CNT29_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT30_STATUS_Pos 30U /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Position */ +#define PMU_OVSCLR_CNT30_STATUS_Msk (1UL << PMU_OVSCLR_CNT30_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Mask */ + +#define PMU_OVSCLR_CYCCNT_STATUS_Pos 31U /*!< PMU OVSCLR: Cycle Counter Overflow Clear Position */ +#define PMU_OVSCLR_CYCCNT_STATUS_Msk (1UL << PMU_OVSCLR_CYCCNT_STATUS_Pos) /*!< PMU OVSCLR: Cycle Counter Overflow Clear Mask */ + +/** \brief PMU Software Increment Counter */ + +#define PMU_SWINC_CNT0_Pos 0U /*!< PMU SWINC: Event Counter 0 Software Increment Position */ +#define PMU_SWINC_CNT0_Msk (1UL /*<< PMU_SWINC_CNT0_Pos */) /*!< PMU SWINC: Event Counter 0 Software Increment Mask */ + +#define PMU_SWINC_CNT1_Pos 1U /*!< PMU SWINC: Event Counter 1 Software Increment Position */ +#define PMU_SWINC_CNT1_Msk (1UL << PMU_SWINC_CNT1_Pos) /*!< PMU SWINC: Event Counter 1 Software Increment Mask */ + +#define PMU_SWINC_CNT2_Pos 2U /*!< PMU SWINC: Event Counter 2 Software Increment Position */ +#define PMU_SWINC_CNT2_Msk (1UL << PMU_SWINC_CNT2_Pos) /*!< PMU SWINC: Event Counter 2 Software Increment Mask */ + +#define PMU_SWINC_CNT3_Pos 3U /*!< PMU SWINC: Event Counter 3 Software Increment Position */ +#define PMU_SWINC_CNT3_Msk (1UL << PMU_SWINC_CNT3_Pos) /*!< PMU SWINC: Event Counter 3 Software Increment Mask */ + +#define PMU_SWINC_CNT4_Pos 4U /*!< PMU SWINC: Event Counter 4 Software Increment Position */ +#define PMU_SWINC_CNT4_Msk (1UL << PMU_SWINC_CNT4_Pos) /*!< PMU SWINC: Event Counter 4 Software Increment Mask */ + +#define PMU_SWINC_CNT5_Pos 5U /*!< PMU SWINC: Event Counter 5 Software Increment Position */ +#define PMU_SWINC_CNT5_Msk (1UL << PMU_SWINC_CNT5_Pos) /*!< PMU SWINC: Event Counter 5 Software Increment Mask */ + +#define PMU_SWINC_CNT6_Pos 6U /*!< PMU SWINC: Event Counter 6 Software Increment Position */ +#define PMU_SWINC_CNT6_Msk (1UL << PMU_SWINC_CNT6_Pos) /*!< PMU SWINC: Event Counter 6 Software Increment Mask */ + +#define PMU_SWINC_CNT7_Pos 7U /*!< PMU SWINC: Event Counter 7 Software Increment Position */ +#define PMU_SWINC_CNT7_Msk (1UL << PMU_SWINC_CNT7_Pos) /*!< PMU SWINC: Event Counter 7 Software Increment Mask */ + +#define PMU_SWINC_CNT8_Pos 8U /*!< PMU SWINC: Event Counter 8 Software Increment Position */ +#define PMU_SWINC_CNT8_Msk (1UL << PMU_SWINC_CNT8_Pos) /*!< PMU SWINC: Event Counter 8 Software Increment Mask */ + +#define PMU_SWINC_CNT9_Pos 9U /*!< PMU SWINC: Event Counter 9 Software Increment Position */ +#define PMU_SWINC_CNT9_Msk (1UL << PMU_SWINC_CNT9_Pos) /*!< PMU SWINC: Event Counter 9 Software Increment Mask */ + +#define PMU_SWINC_CNT10_Pos 10U /*!< PMU SWINC: Event Counter 10 Software Increment Position */ +#define PMU_SWINC_CNT10_Msk (1UL << PMU_SWINC_CNT10_Pos) /*!< PMU SWINC: Event Counter 10 Software Increment Mask */ + +#define PMU_SWINC_CNT11_Pos 11U /*!< PMU SWINC: Event Counter 11 Software Increment Position */ +#define PMU_SWINC_CNT11_Msk (1UL << PMU_SWINC_CNT11_Pos) /*!< PMU SWINC: Event Counter 11 Software Increment Mask */ + +#define PMU_SWINC_CNT12_Pos 12U /*!< PMU SWINC: Event Counter 12 Software Increment Position */ +#define PMU_SWINC_CNT12_Msk (1UL << PMU_SWINC_CNT12_Pos) /*!< PMU SWINC: Event Counter 12 Software Increment Mask */ + +#define PMU_SWINC_CNT13_Pos 13U /*!< PMU SWINC: Event Counter 13 Software Increment Position */ +#define PMU_SWINC_CNT13_Msk (1UL << PMU_SWINC_CNT13_Pos) /*!< PMU SWINC: Event Counter 13 Software Increment Mask */ + +#define PMU_SWINC_CNT14_Pos 14U /*!< PMU SWINC: Event Counter 14 Software Increment Position */ +#define PMU_SWINC_CNT14_Msk (1UL << PMU_SWINC_CNT14_Pos) /*!< PMU SWINC: Event Counter 14 Software Increment Mask */ + +#define PMU_SWINC_CNT15_Pos 15U /*!< PMU SWINC: Event Counter 15 Software Increment Position */ +#define PMU_SWINC_CNT15_Msk (1UL << PMU_SWINC_CNT15_Pos) /*!< PMU SWINC: Event Counter 15 Software Increment Mask */ + +#define PMU_SWINC_CNT16_Pos 16U /*!< PMU SWINC: Event Counter 16 Software Increment Position */ +#define PMU_SWINC_CNT16_Msk (1UL << PMU_SWINC_CNT16_Pos) /*!< PMU SWINC: Event Counter 16 Software Increment Mask */ + +#define PMU_SWINC_CNT17_Pos 17U /*!< PMU SWINC: Event Counter 17 Software Increment Position */ +#define PMU_SWINC_CNT17_Msk (1UL << PMU_SWINC_CNT17_Pos) /*!< PMU SWINC: Event Counter 17 Software Increment Mask */ + +#define PMU_SWINC_CNT18_Pos 18U /*!< PMU SWINC: Event Counter 18 Software Increment Position */ +#define PMU_SWINC_CNT18_Msk (1UL << PMU_SWINC_CNT18_Pos) /*!< PMU SWINC: Event Counter 18 Software Increment Mask */ + +#define PMU_SWINC_CNT19_Pos 19U /*!< PMU SWINC: Event Counter 19 Software Increment Position */ +#define PMU_SWINC_CNT19_Msk (1UL << PMU_SWINC_CNT19_Pos) /*!< PMU SWINC: Event Counter 19 Software Increment Mask */ + +#define PMU_SWINC_CNT20_Pos 20U /*!< PMU SWINC: Event Counter 20 Software Increment Position */ +#define PMU_SWINC_CNT20_Msk (1UL << PMU_SWINC_CNT20_Pos) /*!< PMU SWINC: Event Counter 20 Software Increment Mask */ + +#define PMU_SWINC_CNT21_Pos 21U /*!< PMU SWINC: Event Counter 21 Software Increment Position */ +#define PMU_SWINC_CNT21_Msk (1UL << PMU_SWINC_CNT21_Pos) /*!< PMU SWINC: Event Counter 21 Software Increment Mask */ + +#define PMU_SWINC_CNT22_Pos 22U /*!< PMU SWINC: Event Counter 22 Software Increment Position */ +#define PMU_SWINC_CNT22_Msk (1UL << PMU_SWINC_CNT22_Pos) /*!< PMU SWINC: Event Counter 22 Software Increment Mask */ + +#define PMU_SWINC_CNT23_Pos 23U /*!< PMU SWINC: Event Counter 23 Software Increment Position */ +#define PMU_SWINC_CNT23_Msk (1UL << PMU_SWINC_CNT23_Pos) /*!< PMU SWINC: Event Counter 23 Software Increment Mask */ + +#define PMU_SWINC_CNT24_Pos 24U /*!< PMU SWINC: Event Counter 24 Software Increment Position */ +#define PMU_SWINC_CNT24_Msk (1UL << PMU_SWINC_CNT24_Pos) /*!< PMU SWINC: Event Counter 24 Software Increment Mask */ + +#define PMU_SWINC_CNT25_Pos 25U /*!< PMU SWINC: Event Counter 25 Software Increment Position */ +#define PMU_SWINC_CNT25_Msk (1UL << PMU_SWINC_CNT25_Pos) /*!< PMU SWINC: Event Counter 25 Software Increment Mask */ + +#define PMU_SWINC_CNT26_Pos 26U /*!< PMU SWINC: Event Counter 26 Software Increment Position */ +#define PMU_SWINC_CNT26_Msk (1UL << PMU_SWINC_CNT26_Pos) /*!< PMU SWINC: Event Counter 26 Software Increment Mask */ + +#define PMU_SWINC_CNT27_Pos 27U /*!< PMU SWINC: Event Counter 27 Software Increment Position */ +#define PMU_SWINC_CNT27_Msk (1UL << PMU_SWINC_CNT27_Pos) /*!< PMU SWINC: Event Counter 27 Software Increment Mask */ + +#define PMU_SWINC_CNT28_Pos 28U /*!< PMU SWINC: Event Counter 28 Software Increment Position */ +#define PMU_SWINC_CNT28_Msk (1UL << PMU_SWINC_CNT28_Pos) /*!< PMU SWINC: Event Counter 28 Software Increment Mask */ + +#define PMU_SWINC_CNT29_Pos 29U /*!< PMU SWINC: Event Counter 29 Software Increment Position */ +#define PMU_SWINC_CNT29_Msk (1UL << PMU_SWINC_CNT29_Pos) /*!< PMU SWINC: Event Counter 29 Software Increment Mask */ + +#define PMU_SWINC_CNT30_Pos 30U /*!< PMU SWINC: Event Counter 30 Software Increment Position */ +#define PMU_SWINC_CNT30_Msk (1UL << PMU_SWINC_CNT30_Pos) /*!< PMU SWINC: Event Counter 30 Software Increment Mask */ + +/** \brief PMU Control Register Definitions */ + +#define PMU_CTRL_ENABLE_Pos 0U /*!< PMU CTRL: ENABLE Position */ +#define PMU_CTRL_ENABLE_Msk (1UL /*<< PMU_CTRL_ENABLE_Pos*/) /*!< PMU CTRL: ENABLE Mask */ + +#define PMU_CTRL_EVENTCNT_RESET_Pos 1U /*!< PMU CTRL: Event Counter Reset Position */ +#define PMU_CTRL_EVENTCNT_RESET_Msk (1UL << PMU_CTRL_EVENTCNT_RESET_Pos) /*!< PMU CTRL: Event Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_RESET_Pos 2U /*!< PMU CTRL: Cycle Counter Reset Position */ +#define PMU_CTRL_CYCCNT_RESET_Msk (1UL << PMU_CTRL_CYCCNT_RESET_Pos) /*!< PMU CTRL: Cycle Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_DISABLE_Pos 5U /*!< PMU CTRL: Disable Cycle Counter Position */ +#define PMU_CTRL_CYCCNT_DISABLE_Msk (1UL << PMU_CTRL_CYCCNT_DISABLE_Pos) /*!< PMU CTRL: Disable Cycle Counter Mask */ + +#define PMU_CTRL_FRZ_ON_OV_Pos 9U /*!< PMU CTRL: Freeze-on-overflow Position */ +#define PMU_CTRL_FRZ_ON_OV_Msk (1UL << PMU_CTRL_FRZ_ON_OVERFLOW_Pos) /*!< PMU CTRL: Freeze-on-overflow Mask */ + +#define PMU_CTRL_TRACE_ON_OV_Pos 11U /*!< PMU CTRL: Trace-on-overflow Position */ +#define PMU_CTRL_TRACE_ON_OV_Msk (1UL << PMU_CTRL_TRACE_ON_OVERFLOW_Pos) /*!< PMU CTRL: Trace-on-overflow Mask */ + +/** \brief PMU Type Register Definitions */ + +#define PMU_TYPE_NUM_CNTS_Pos 0U /*!< PMU TYPE: Number of Counters Position */ +#define PMU_TYPE_NUM_CNTS_Msk (0xFFUL /*<< PMU_TYPE_NUM_CNTS_Pos*/) /*!< PMU TYPE: Number of Counters Mask */ + +#define PMU_TYPE_SIZE_CNTS_Pos 8U /*!< PMU TYPE: Size of Counters Position */ +#define PMU_TYPE_SIZE_CNTS_Msk (0x3FUL << PMU_TYPE_SIZE_CNTS_Pos) /*!< PMU TYPE: Size of Counters Mask */ + +#define PMU_TYPE_CYCCNT_PRESENT_Pos 14U /*!< PMU TYPE: Cycle Counter Present Position */ +#define PMU_TYPE_CYCCNT_PRESENT_Msk (1UL << PMU_TYPE_CYCCNT_PRESENT_Pos) /*!< PMU TYPE: Cycle Counter Present Mask */ + +#define PMU_TYPE_FRZ_OV_SUPPORT_Pos 21U /*!< PMU TYPE: Freeze-on-overflow Support Position */ +#define PMU_TYPE_FRZ_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Freeze-on-overflow Support Mask */ + +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Pos 23U /*!< PMU TYPE: Trace-on-overflow Support Position */ +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Trace-on-overflow Support Mask */ + +/** \brief PMU Authentication Status Register Definitions */ + +#define PMU_AUTHSTATUS_NSID_Pos 0U /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSID_Msk (0x3UL /*<< PMU_AUTHSTATUS_NSID_Pos*/) /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSNID_Pos 2U /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSNID_Msk (0x3UL << PMU_AUTHSTATUS_NSNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SID_Pos 4U /*!< PMU AUTHSTATUS: Secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_SID_Msk (0x3UL << PMU_AUTHSTATUS_SID_Pos) /*!< PMU AUTHSTATUS: Secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SNID_Pos 6U /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SNID_Msk (0x3UL << PMU_AUTHSTATUS_SNID_Pos) /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUID_Pos 16U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUID_Msk (0x3UL << PMU_AUTHSTATUS_NSUID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUNID_Pos 18U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUNID_Msk (0x3UL << PMU_AUTHSTATUS_NSUNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUID_Pos 20U /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_SUID_Msk (0x3UL << PMU_AUTHSTATUS_SUID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUNID_Pos 22U /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SUNID_Msk (0x3UL << PMU_AUTHSTATUS_SUNID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Mask */ + +/*@} end of group CMSIS_PMU */ +#endif + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +#define FPU_FPDSCR_FZ16_Pos 19U /*!< FPDSCR: FZ16 bit Position */ +#define FPU_FPDSCR_FZ16_Msk (1UL << FPU_FPDSCR_FZ16_Pos) /*!< FPDSCR: FZ16 bit Mask */ + +#define FPU_FPDSCR_LTPSIZE_Pos 16U /*!< FPDSCR: LTPSIZE bit Position */ +#define FPU_FPDSCR_LTPSIZE_Msk (7UL << FPU_FPDSCR_LTPSIZE_Pos) /*!< FPDSCR: LTPSIZE bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FPRound_Pos 28U /*!< MVFR0: FPRound bits Position */ +#define FPU_MVFR0_FPRound_Msk (0xFUL << FPU_MVFR0_FPRound_Pos) /*!< MVFR0: FPRound bits Mask */ + +#define FPU_MVFR0_FPSqrt_Pos 20U /*!< MVFR0: FPSqrt bits Position */ +#define FPU_MVFR0_FPSqrt_Msk (0xFUL << FPU_MVFR0_FPSqrt_Pos) /*!< MVFR0: FPSqrt bits Mask */ + +#define FPU_MVFR0_FPDivide_Pos 16U /*!< MVFR0: FPDivide bits Position */ +#define FPU_MVFR0_FPDivide_Msk (0xFUL << FPU_MVFR0_FPDivide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FPDP_Pos 8U /*!< MVFR0: FPDP bits Position */ +#define FPU_MVFR0_FPDP_Msk (0xFUL << FPU_MVFR0_FPDP_Pos) /*!< MVFR0: FPDP bits Mask */ + +#define FPU_MVFR0_FPSP_Pos 4U /*!< MVFR0: FPSP bits Position */ +#define FPU_MVFR0_FPSP_Msk (0xFUL << FPU_MVFR0_FPSP_Pos) /*!< MVFR0: FPSP bits Mask */ + +#define FPU_MVFR0_SIMDReg_Pos 0U /*!< MVFR0: SIMDReg bits Position */ +#define FPU_MVFR0_SIMDReg_Msk (0xFUL /*<< FPU_MVFR0_SIMDReg_Pos*/) /*!< MVFR0: SIMDReg bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FMAC_Pos 28U /*!< MVFR1: FMAC bits Position */ +#define FPU_MVFR1_FMAC_Msk (0xFUL << FPU_MVFR1_FMAC_Pos) /*!< MVFR1: FMAC bits Mask */ + +#define FPU_MVFR1_FPHP_Pos 24U /*!< MVFR1: FPHP bits Position */ +#define FPU_MVFR1_FPHP_Msk (0xFUL << FPU_MVFR1_FPHP_Pos) /*!< MVFR1: FPHP bits Mask */ + +#define FPU_MVFR1_FP16_Pos 20U /*!< MVFR1: FP16 bits Position */ +#define FPU_MVFR1_FP16_Msk (0xFUL << FPU_MVFR1_FP16_Pos) /*!< MVFR1: FP16 bits Mask */ + +#define FPU_MVFR1_MVE_Pos 8U /*!< MVFR1: MVE bits Position */ +#define FPU_MVFR1_MVE_Msk (0xFUL << FPU_MVFR1_MVE_Pos) /*!< MVFR1: MVE bits Mask */ + +#define FPU_MVFR1_FPDNaN_Pos 4U /*!< MVFR1: FPDNaN bits Position */ +#define FPU_MVFR1_FPDNaN_Msk (0xFUL << FPU_MVFR1_FPDNaN_Pos) /*!< MVFR1: FPDNaN bits Mask */ + +#define FPU_MVFR1_FPFtZ_Pos 0U /*!< MVFR1: FPFtZ bits Position */ +#define FPU_MVFR1_FPFtZ_Msk (0xFUL /*<< FPU_MVFR1_FPFtZ_Pos*/) /*!< MVFR1: FPFtZ bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_FPD_Pos 23U /*!< \deprecated CoreDebug DHCSR: S_FPD Position */ +#define CoreDebug_DHCSR_S_FPD_Msk (1UL << CoreDebug_DHCSR_S_FPD_Pos) /*!< \deprecated CoreDebug DHCSR: S_FPD Mask */ + +#define CoreDebug_DHCSR_S_SUIDE_Pos 22U /*!< \deprecated CoreDebug DHCSR: S_SUIDE Position */ +#define CoreDebug_DHCSR_S_SUIDE_Msk (1UL << CoreDebug_DHCSR_S_SUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SUIDE Mask */ + +#define CoreDebug_DHCSR_S_NSUIDE_Pos 21U /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Position */ +#define CoreDebug_DHCSR_S_NSUIDE_Msk (1UL << CoreDebug_DHCSR_S_NSUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Mask */ + +#define CoreDebug_DHCSR_S_SDE_Pos 20U /*!< \deprecated CoreDebug DHCSR: S_SDE Position */ +#define CoreDebug_DHCSR_S_SDE_Msk (1UL << CoreDebug_DHCSR_S_SDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SDE Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_PMOV_Pos 6U /*!< \deprecated CoreDebug DHCSR: C_PMOV Position */ +#define CoreDebug_DHCSR_C_PMOV_Msk (1UL << CoreDebug_DHCSR_C_PMOV_Pos) /*!< \deprecated CoreDebug DHCSR: C_PMOV Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Set Clear Exception and Monitor Control Register Definitions */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_REQ_Pos 3U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_SET_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_PEND_Pos 1U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_SET_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_UIDEN_Pos 10U /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_UIDAPEN_Pos 9U /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDAPEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDAPEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Mask */ + +#define CoreDebug_DAUTHCTRL_FSDMA_Pos 8U /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Position */ +#define CoreDebug_DAUTHCTRL_FSDMA_Msk (1UL << CoreDebug_DAUTHCTRL_FSDMA_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_FPD_Pos 23U /*!< DCB DHCSR: Floating-point registers Debuggable Position */ +#define DCB_DHCSR_S_FPD_Msk (0x1UL << DCB_DHCSR_S_FPD_Pos) /*!< DCB DHCSR: Floating-point registers Debuggable Mask */ + +#define DCB_DHCSR_S_SUIDE_Pos 22U /*!< DCB DHCSR: Secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_SUIDE_Msk (0x1UL << DCB_DHCSR_S_SUIDE_Pos) /*!< DCB DHCSR: Secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_NSUIDE_Pos 21U /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_NSUIDE_Msk (0x1UL << DCB_DHCSR_S_NSUIDE_Pos) /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_PMOV_Pos 6U /*!< DCB DHCSR: Halt on PMU overflow control Position */ +#define DCB_DHCSR_C_PMOV_Msk (0x1UL << DCB_DHCSR_C_PMOV_Pos) /*!< DCB DHCSR: Halt on PMU overflow control Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DSCEMCR, Debug Set Clear Exception and Monitor Control Register Definitions */ +#define DCB_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< DCB DSCEMCR: Clear monitor request Position */ +#define DCB_DSCEMCR_CLR_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_REQ_Pos) /*!< DCB DSCEMCR: Clear monitor request Mask */ + +#define DCB_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< DCB DSCEMCR: Clear monitor pend Position */ +#define DCB_DSCEMCR_CLR_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_PEND_Pos) /*!< DCB DSCEMCR: Clear monitor pend Mask */ + +#define DCB_DSCEMCR_SET_MON_REQ_Pos 3U /*!< DCB DSCEMCR: Set monitor request Position */ +#define DCB_DSCEMCR_SET_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_SET_MON_REQ_Pos) /*!< DCB DSCEMCR: Set monitor request Mask */ + +#define DCB_DSCEMCR_SET_MON_PEND_Pos 1U /*!< DCB DSCEMCR: Set monitor pend Position */ +#define DCB_DSCEMCR_SET_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_SET_MON_PEND_Pos) /*!< DCB DSCEMCR: Set monitor pend Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_UIDEN_Pos 10U /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Position */ +#define DCB_DAUTHCTRL_UIDEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Mask */ + +#define DCB_DAUTHCTRL_UIDAPEN_Pos 9U /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Position */ +#define DCB_DAUTHCTRL_UIDAPEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDAPEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Mask */ + +#define DCB_DAUTHCTRL_FSDMA_Pos 8U /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Position */ +#define DCB_DAUTHCTRL_FSDMA_Msk (0x1UL << DCB_DAUTHCTRL_FSDMA_Pos) /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Mask */ + +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SUNID_Pos 22U /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUNID_Msk (0x3UL << DIB_DAUTHSTATUS_SUNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SUID_Pos 20U /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUID_Msk (0x3UL << DIB_DAUTHSTATUS_SUID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_NSUNID_Pos 18U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Position */ +#define DIB_DAUTHSTATUS_NSUNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Mask */ + +#define DIB_DAUTHSTATUS_NSUID_Pos 16U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_NSUID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + #define PMU_BASE (0xE0003000UL) /*!< PMU Base Address */ + #define PMU ((PMU_Type *) PMU_BASE ) /*!< PMU configuration struct */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## PMU functions and events #################################### */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + +#include "pmu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + +/* ########################## MVE functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_MveFunctions MVE Functions + \brief Function that provides MVE type. + @{ + */ + +/** + \brief get MVE type + \details returns the MVE type + \returns + - \b 0: No Vector Extension (MVE) + - \b 1: Integer Vector Extension (MVE-I) + - \b 2: Floating-point Vector Extension (MVE-F) + */ +__STATIC_INLINE uint32_t SCB_GetMVEType(void) +{ + const uint32_t mvfr1 = FPU->MVFR1; + if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x2U << FPU_MVFR1_MVE_Pos)) + { + return 2U; + } + else if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x1U << FPU_MVFR1_MVE_Pos)) + { + return 1U; + } + else + { + return 0U; + } +} + + +/*@} end of CMSIS_Core_MveFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_armv8mbl.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv8mbl.h similarity index 80% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_armv8mbl.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv8mbl.h index 251e4ed..932d3d1 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_armv8mbl.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv8mbl.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_armv8mbl.h * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 22. June 2018 + * @version V5.1.0 + * @date 27. March 2020 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -23,9 +23,11 @@ */ #if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ + #pragma system_include /* treat file as system include file for MISRA check */ #elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ #endif #ifndef __CORE_ARMV8MBL_H_GENERIC @@ -68,7 +70,7 @@ #define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ -#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ +#define __CORTEX_M (2U) /*!< Cortex-M Core */ /** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all @@ -81,7 +83,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -975,6 +977,7 @@ typedef struct #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) @@ -983,7 +986,7 @@ typedef struct */ /** - \brief Structure type to access the Core Debug Register (CoreDebug). + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). */ typedef struct { @@ -991,91 +994,276 @@ typedef struct __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; + uint32_t RESERVED0[1U]; __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ } CoreDebug_Type; /* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ -/* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ -#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< \deprecated CoreDebug DEMCR: DWTENA Mask */ -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ /* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ /* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ /*@} end of group CMSIS_CoreDebug */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + /** \ingroup CMSIS_core_register \defgroup CMSIS_core_bitfield Core register bit field macros @@ -1113,7 +1301,9 @@ typedef struct #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ @@ -1124,7 +1314,9 @@ typedef struct #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ @@ -1138,7 +1330,9 @@ typedef struct #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ @@ -1146,7 +1340,9 @@ typedef struct #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ @@ -1163,6 +1359,7 @@ typedef struct Core Function Interface contains: - Core NVIC Functions - Core SysTick Functions + - Core Debug Functions - Core Register Access Functions ******************************************************************************/ /** @@ -1223,7 +1420,7 @@ typedef struct #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ @@ -1253,7 +1450,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1552,6 +1751,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) uint32_t *vectors = (uint32_t *)0x0U; #endif vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } @@ -1835,6 +2035,110 @@ __STATIC_INLINE void TZ_SAU_Disable(void) +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + /* ################################## SysTick function ############################################ */ /** \ingroup CMSIS_Core_FunctionInterface diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_armv8mml.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv8mml.h similarity index 82% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_armv8mml.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv8mml.h index 3a3148e..c119fbf 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_armv8mml.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_armv8mml.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_armv8mml.h * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 06. July 2018 + * @version V5.2.3 + * @date 13. October 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -23,9 +23,11 @@ */ #if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ + #pragma system_include /* treat file as system include file for MISRA check */ #elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ #endif #ifndef __CORE_ARMV8MML_H_GENERIC @@ -68,7 +70,7 @@ #define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ -#define __CORTEX_M (81U) /*!< Cortex-M Core */ +#define __CORTEX_M (80U) /*!< Cortex-M Core */ /** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. @@ -97,7 +99,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) #define __FPU_USED 1U #else @@ -248,6 +250,11 @@ #warning "__DSP_PRESENT not defined in device header file; using default!" #endif + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + #ifndef __NVIC_PRIO_BITS #define __NVIC_PRIO_BITS 3U #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" @@ -512,7 +519,7 @@ typedef struct __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ @@ -521,7 +528,10 @@ typedef struct __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ - uint32_t RESERVED3[92U]; + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ uint32_t RESERVED4[15U]; __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ @@ -538,14 +548,7 @@ typedef struct __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ } SCB_Type; /* SCB CPUID Register Definitions */ @@ -746,22 +749,22 @@ typedef struct #define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ #define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ #define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ #define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ #define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ #define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ #define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ /* BusFault Status Register (part of SCB Configurable Fault Status Register) */ @@ -921,78 +924,6 @@ typedef struct #define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ #define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - /*@} end of group CMSIS_SCB */ @@ -1097,10 +1028,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -1163,18 +1091,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1688,8 +1604,9 @@ typedef struct __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ } FPU_Type; /* Floating-Point Context Control Register Definitions */ @@ -1761,7 +1678,7 @@ typedef struct #define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ #define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ -/* Media and FP Feature Register 0 Definitions */ +/* Media and VFP Feature Register 0 Definitions */ #define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ #define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ @@ -1786,7 +1703,7 @@ typedef struct #define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ #define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ -/* Media and FP Feature Register 1 Definitions */ +/* Media and VFP Feature Register 1 Definitions */ #define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ #define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ @@ -1799,9 +1716,13 @@ typedef struct #define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ #define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + /*@} end of group CMSIS_FPU */ - +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) @@ -1810,7 +1731,7 @@ typedef struct */ /** - \brief Structure type to access the Core Debug Register (CoreDebug). + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). */ typedef struct { @@ -1818,124 +1739,354 @@ typedef struct __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; + uint32_t RESERVED0[1U]; __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ } CoreDebug_Type; /* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ /* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ /* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ /* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ /*@} end of group CMSIS_CoreDebug */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + /** \ingroup CMSIS_core_register \defgroup CMSIS_core_bitfield Core register bit field macros @@ -1974,7 +2125,9 @@ typedef struct #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ @@ -1986,7 +2139,9 @@ typedef struct #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ @@ -2003,7 +2158,9 @@ typedef struct #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ @@ -2012,7 +2169,9 @@ typedef struct #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ @@ -2026,6 +2185,15 @@ typedef struct /*@} */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ +/*@} */ + /******************************************************************************* * Hardware Abstraction Layer @@ -2093,7 +2261,7 @@ typedef struct #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ @@ -2122,7 +2290,7 @@ __STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB->AIRCR = reg_value; } @@ -2148,7 +2316,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -2440,6 +2610,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } @@ -2496,7 +2667,7 @@ __STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB_NS->AIRCR = reg_value; } @@ -2728,6 +2899,13 @@ __STATIC_INLINE uint32_t SCB_GetFPUType(void) /*@} end of CMSIS_Core_FpuFunctions */ +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + /* ########################## SAU functions #################################### */ /** @@ -2766,6 +2944,110 @@ __STATIC_INLINE void TZ_SAU_Disable(void) +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + /* ################################## SysTick function ############################################ */ /** \ingroup CMSIS_Core_FunctionInterface diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm0.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm0.h similarity index 98% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm0.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm0.h index f929bba..6441ff3 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm0.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm0.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm0.h * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File - * @version V5.0.5 - * @date 28. May 2018 + * @version V5.0.8 + * @date 21. August 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -316,7 +316,7 @@ typedef struct __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[31U]; __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; + uint32_t RESERVED1[31U]; __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[31U]; __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -624,7 +624,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -829,8 +831,9 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr */ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { - uint32_t *vectors = (uint32_t *)0x0U; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + *(vectors + (int32_t)IRQn) = vector; /* use pointer arithmetic to access vector */ + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ } @@ -844,8 +847,8 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) */ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { - uint32_t *vectors = (uint32_t *)0x0U; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + return *(vectors + (int32_t)IRQn); /* use pointer arithmetic to access vector */ } diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm0plus.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm0plus.h similarity index 98% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm0plus.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm0plus.h index 424011a..4e7179a 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm0plus.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm0plus.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm0plus.h * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File - * @version V5.0.6 - * @date 28. May 2018 + * @version V5.0.9 + * @date 21. August 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -330,7 +330,7 @@ typedef struct __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[31U]; __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; + uint32_t RESERVED1[31U]; __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[31U]; __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -742,7 +742,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -949,10 +951,12 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +#else + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + *(vectors + (int32_t)IRQn) = vector; /* use pointer arithmetic to access vector */ +#endif + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ } @@ -968,11 +972,11 @@ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; - +#else + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + return *(vectors + (int32_t)IRQn); /* use pointer arithmetic to access vector */ +#endif } diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm1.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm1.h similarity index 99% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm1.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm1.h index 0ed678e..76b4569 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm1.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm1.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file core_cm1.h * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File - * @version V1.0.0 - * @date 23. July 2018 + * @version V1.0.1 + * @date 12. November 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -651,7 +651,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -858,6 +860,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)0x0U; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ } diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm23.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm23.h similarity index 81% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm23.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm23.h index acbc5df..55fff99 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm23.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm23.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm23.h * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 22. June 2018 + * @version V5.1.0 + * @date 11. February 2020 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -23,9 +23,11 @@ */ #if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ + #pragma system_include /* treat file as system include file for MISRA check */ #elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ #endif #ifndef __CORE_CM23_H_GENERIC @@ -81,7 +83,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -1050,6 +1052,7 @@ typedef struct #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) @@ -1058,7 +1061,7 @@ typedef struct */ /** - \brief Structure type to access the Core Debug Register (CoreDebug). + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). */ typedef struct { @@ -1066,91 +1069,276 @@ typedef struct __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; + uint32_t RESERVED0[1U]; __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ } CoreDebug_Type; /* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ /* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ -#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< \deprecated CoreDebug DEMCR: DWTENA Mask */ -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ /* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ /* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ /*@} end of group CMSIS_CoreDebug */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + /** \ingroup CMSIS_core_register \defgroup CMSIS_core_bitfield Core register bit field macros @@ -1188,7 +1376,9 @@ typedef struct #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ @@ -1199,7 +1389,9 @@ typedef struct #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ @@ -1213,7 +1405,9 @@ typedef struct #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ @@ -1221,7 +1415,9 @@ typedef struct #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ @@ -1238,6 +1434,7 @@ typedef struct Core Function Interface contains: - Core NVIC Functions - Core SysTick Functions + - Core Debug Functions - Core Register Access Functions ******************************************************************************/ /** @@ -1298,17 +1495,17 @@ typedef struct #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ #define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else +#else #define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ #endif - + /* Interrupt Priorities are WORD accessible only under Armv6-M */ /* The following MACROS handle generation of the register offset and byte masks */ #define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) @@ -1328,7 +1525,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1627,6 +1826,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) uint32_t *vectors = (uint32_t *)0x0U; #endif vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } @@ -1910,6 +2110,110 @@ __STATIC_INLINE void TZ_SAU_Disable(void) +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + /* ################################## SysTick function ############################################ */ /** \ingroup CMSIS_Core_FunctionInterface diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm3.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm3.h similarity index 97% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm3.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm3.h index 74bff64..74fb87e 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm3.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm3.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm3.h * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 + * @version V5.1.2 + * @date 04. June 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -62,7 +62,7 @@ #include "cmsis_version.h" -/* CMSIS CM3 definitions */ +/* CMSIS CM3 definitions */ #define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ #define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ #define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -142,6 +142,11 @@ #warning "__MPU_PRESENT not defined in device header file; using default!" #endif + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + #ifndef __NVIC_PRIO_BITS #define __NVIC_PRIO_BITS 3U #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" @@ -342,7 +347,7 @@ typedef struct __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[24U]; __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; + uint32_t RESERVED1[24U]; __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[24U]; __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -560,19 +565,19 @@ typedef struct #define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ #define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ #define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ #define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ #define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ #define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ /* BusFault Status Register (part of SCB Configurable Fault Status Register) */ @@ -668,6 +673,12 @@ typedef struct #define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ /* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ #define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ #define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ @@ -677,6 +688,7 @@ typedef struct #define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ #define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif /*@} end of group CMSIS_SCnotSCB */ @@ -757,10 +769,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -811,18 +820,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1055,13 +1052,13 @@ typedef struct /* TPI Integration ETM Data Register Definitions (FIFO0) */ #define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ #define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ #define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ #define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ #define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ #define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ @@ -1084,13 +1081,13 @@ typedef struct /* TPI Integration ITM Data Register Definitions (FIFO1) */ #define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ #define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ #define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ #define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ #define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ #define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ @@ -1451,7 +1448,7 @@ typedef struct #ifdef CMSIS_VECTAB_VIRTUAL #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" #endif #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE #else @@ -1486,7 +1483,7 @@ __STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB->AIRCR = reg_value; } @@ -1512,7 +1509,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1737,6 +1736,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ } @@ -1776,6 +1776,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) /*@} end of CMSIS_Core_NVICFunctions */ + /* ########################## MPU functions #################################### */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) @@ -1784,6 +1785,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) #endif + /* ########################## FPU functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm33.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm33.h similarity index 83% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm33.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm33.h index 6cd2db7..18a2e6f 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm33.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm33.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm33.h * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File - * @version V5.0.9 - * @date 06. July 2018 + * @version V5.2.3 + * @date 13. October 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -23,9 +23,11 @@ */ #if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ + #pragma system_include /* treat file as system include file for MISRA check */ #elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ #endif #ifndef __CORE_CM33_H_GENERIC @@ -97,7 +99,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined (__ARM_PCS_VFP) + #if defined (__ARM_FP) #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) #define __FPU_USED 1U #else @@ -248,6 +250,11 @@ #warning "__DSP_PRESENT not defined in device header file; using default!" #endif + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + #ifndef __NVIC_PRIO_BITS #define __NVIC_PRIO_BITS 3U #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" @@ -512,7 +519,7 @@ typedef struct __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ @@ -521,7 +528,10 @@ typedef struct __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ - uint32_t RESERVED3[92U]; + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ uint32_t RESERVED4[15U]; __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ @@ -538,14 +548,7 @@ typedef struct __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ } SCB_Type; /* SCB CPUID Register Definitions */ @@ -746,22 +749,22 @@ typedef struct #define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ #define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ #define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ #define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ #define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ #define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ #define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ /* BusFault Status Register (part of SCB Configurable Fault Status Register) */ @@ -921,78 +924,6 @@ typedef struct #define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ #define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - /*@} end of group CMSIS_SCB */ @@ -1097,10 +1028,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -1163,18 +1091,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1763,8 +1679,9 @@ typedef struct __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ } FPU_Type; /* Floating-Point Context Control Register Definitions */ @@ -1836,7 +1753,7 @@ typedef struct #define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ #define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ -/* Media and FP Feature Register 0 Definitions */ +/* Media and VFP Feature Register 0 Definitions */ #define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ #define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ @@ -1861,7 +1778,7 @@ typedef struct #define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ #define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ -/* Media and FP Feature Register 1 Definitions */ +/* Media and VFP Feature Register 1 Definitions */ #define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ #define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ @@ -1874,9 +1791,13 @@ typedef struct #define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ #define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + /*@} end of group CMSIS_FPU */ - +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) @@ -1885,7 +1806,7 @@ typedef struct */ /** - \brief Structure type to access the Core Debug Register (CoreDebug). + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). */ typedef struct { @@ -1893,124 +1814,354 @@ typedef struct __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; + uint32_t RESERVED0[1U]; __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ } CoreDebug_Type; /* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ /* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ /* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ /* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ /*@} end of group CMSIS_CoreDebug */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + /** \ingroup CMSIS_core_register \defgroup CMSIS_core_bitfield Core register bit field macros @@ -2049,7 +2200,9 @@ typedef struct #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ @@ -2061,7 +2214,9 @@ typedef struct #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ @@ -2078,7 +2233,9 @@ typedef struct #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ @@ -2087,7 +2244,9 @@ typedef struct #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ @@ -2101,6 +2260,15 @@ typedef struct /*@} */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ +/*@} */ + /******************************************************************************* * Hardware Abstraction Layer @@ -2159,7 +2327,7 @@ typedef struct /* Special LR values for Secure/Non-Secure call handling and exception handling */ -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ #define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ /* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ @@ -2168,13 +2336,13 @@ typedef struct #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ #define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else +#else #define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ #endif @@ -2197,7 +2365,7 @@ __STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priority group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB->AIRCR = reg_value; } @@ -2223,7 +2391,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -2515,6 +2685,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } @@ -2841,6 +3012,110 @@ __STATIC_INLINE void TZ_SAU_Disable(void) +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + /* ################################## SysTick function ############################################ */ /** \ingroup CMSIS_Core_FunctionInterface diff --git a/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm35p.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm35p.h new file mode 100644 index 0000000..3843d95 --- /dev/null +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm35p.h @@ -0,0 +1,3277 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.1.3 + * @date 13. October 2021 + ******************************************************************************/ +/* + * Copyright (c) 2018-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm4.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm4.h similarity index 97% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm4.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm4.h index 7d56873..e21cd14 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm4.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm4.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm4.h * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 + * @version V5.1.2 + * @date 04. June 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -86,7 +86,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) #define __FPU_USED 1U #else @@ -194,6 +194,11 @@ #warning "__MPU_PRESENT not defined in device header file; using default!" #endif + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + #ifndef __NVIC_PRIO_BITS #define __NVIC_PRIO_BITS 3U #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" @@ -408,7 +413,7 @@ typedef struct __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[24U]; __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; + uint32_t RESERVED1[24U]; __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[24U]; __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -618,22 +623,22 @@ typedef struct #define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ #define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ #define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ #define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ #define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ #define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ #define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ /* BusFault Status Register (part of SCB Configurable Fault Status Register) */ @@ -822,10 +827,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -876,18 +878,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1120,13 +1110,13 @@ typedef struct /* TPI Integration ETM Data Register Definitions (FIFO0) */ #define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ #define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ #define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ #define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ #define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ #define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ @@ -1149,13 +1139,13 @@ typedef struct /* TPI Integration ITM Data Register Definitions (FIFO1) */ #define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ #define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ #define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ #define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ #define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ #define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ @@ -1324,6 +1314,7 @@ typedef struct __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ } FPU_Type; /* Floating-Point Context Control Register Definitions */ @@ -1409,6 +1400,11 @@ typedef struct #define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ #define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + /*@} end of group CMSIS_FPU */ @@ -1625,7 +1621,7 @@ typedef struct #ifdef CMSIS_VECTAB_VIRTUAL #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" #endif #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE #else @@ -1689,7 +1685,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1914,6 +1912,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ } @@ -1953,6 +1952,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) /*@} end of CMSIS_Core_NVICFunctions */ + /* ########################## MPU functions #################################### */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) diff --git a/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm55.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm55.h new file mode 100644 index 0000000..faa30ce --- /dev/null +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm55.h @@ -0,0 +1,4817 @@ +/**************************************************************************//** + * @file core_cm55.h + * @brief CMSIS Cortex-M55 Core Peripheral Access Layer Header File + * @version V1.2.4 + * @date 21. April 2022 + ******************************************************************************/ +/* + * Copyright (c) 2018-2022 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM55_H_GENERIC +#define __CORE_CM55_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M55 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM55 definitions */ +#define __CM55_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM55_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM55_CMSIS_VERSION ((__CM55_CMSIS_VERSION_MAIN << 16U) | \ + __CM55_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (55U) /*!< Cortex-M Core */ + +#if defined ( __CC_ARM ) + #error Legacy Arm Compiler does not support Armv8.1-M target architecture. +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM55_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM55_H_DEPENDANT +#define __CORE_CM55_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM55_REV + #define __CM55_REV 0x0000U + #warning "__CM55_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #if __FPU_PRESENT != 0U + #ifndef __FPU_DP + #define __FPU_DP 0U + #warning "__FPU_DP not defined in device header file; using default!" + #endif + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __PMU_PRESENT + #define __PMU_PRESENT 0U + #warning "__PMU_PRESENT not defined in device header file; using default!" + #endif + + #if __PMU_PRESENT != 0U + #ifndef __PMU_NUM_EVENTCNT + #define __PMU_NUM_EVENTCNT 8U + #warning "__PMU_NUM_EVENTCNT not defined in device header file; using default!" + #elif (__PMU_NUM_EVENTCNT > 8 || __PMU_NUM_EVENTCNT < 2) + #error "__PMU_NUM_EVENTCNT is out of range in device header file!" */ + #endif + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M55 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core EWIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core PMU Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + __IOM uint32_t RFSR; /*!< Offset: 0x204 (R/W) RAS Fault Status Register */ + uint32_t RESERVED4[14U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_IESB_Pos 5U /*!< SCB AIRCR: Implicit ESB Enable Position */ +#define SCB_AIRCR_IESB_Msk (1UL << SCB_AIRCR_IESB_Pos) /*!< SCB AIRCR: Implicit ESB Enable Mask */ + +#define SCB_AIRCR_DIT_Pos 4U /*!< SCB AIRCR: Data Independent Timing Position */ +#define SCB_AIRCR_DIT_Msk (1UL << SCB_AIRCR_DIT_Pos) /*!< SCB AIRCR: Data Independent Timing Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_TRD_Pos 20U /*!< SCB CCR: TRD Position */ +#define SCB_CCR_TRD_Msk (1UL << SCB_CCR_TRD_Pos) /*!< SCB CCR: TRD Mask */ + +#define SCB_CCR_LOB_Pos 19U /*!< SCB CCR: LOB Position */ +#define SCB_CCR_LOB_Msk (1UL << SCB_CCR_LOB_Pos) /*!< SCB CCR: LOB Mask */ + +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_PMU_Pos 5U /*!< SCB DFSR: PMU Position */ +#define SCB_DFSR_PMU_Msk (1UL << SCB_DFSR_PMU_Pos) /*!< SCB DFSR: PMU Mask */ + +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CP7_Pos 7U /*!< SCB NSACR: CP7 Position */ +#define SCB_NSACR_CP7_Msk (1UL << SCB_NSACR_CP7_Pos) /*!< SCB NSACR: CP7 Mask */ + +#define SCB_NSACR_CP6_Pos 6U /*!< SCB NSACR: CP6 Position */ +#define SCB_NSACR_CP6_Msk (1UL << SCB_NSACR_CP6_Pos) /*!< SCB NSACR: CP6 Mask */ + +#define SCB_NSACR_CP5_Pos 5U /*!< SCB NSACR: CP5 Position */ +#define SCB_NSACR_CP5_Msk (1UL << SCB_NSACR_CP5_Pos) /*!< SCB NSACR: CP5 Mask */ + +#define SCB_NSACR_CP4_Pos 4U /*!< SCB NSACR: CP4 Position */ +#define SCB_NSACR_CP4_Msk (1UL << SCB_NSACR_CP4_Pos) /*!< SCB NSACR: CP4 Mask */ + +#define SCB_NSACR_CP3_Pos 3U /*!< SCB NSACR: CP3 Position */ +#define SCB_NSACR_CP3_Msk (1UL << SCB_NSACR_CP3_Pos) /*!< SCB NSACR: CP3 Mask */ + +#define SCB_NSACR_CP2_Pos 2U /*!< SCB NSACR: CP2 Position */ +#define SCB_NSACR_CP2_Msk (1UL << SCB_NSACR_CP2_Pos) /*!< SCB NSACR: CP2 Mask */ + +#define SCB_NSACR_CP1_Pos 1U /*!< SCB NSACR: CP1 Position */ +#define SCB_NSACR_CP1_Msk (1UL << SCB_NSACR_CP1_Pos) /*!< SCB NSACR: CP1 Mask */ + +#define SCB_NSACR_CP0_Pos 0U /*!< SCB NSACR: CP0 Position */ +#define SCB_NSACR_CP0_Msk (1UL /*<< SCB_NSACR_CP0_Pos*/) /*!< SCB NSACR: CP0 Mask */ + +/* SCB Debug Feature Register 0 Definitions */ +#define SCB_ID_DFR_UDE_Pos 28U /*!< SCB ID_DFR: UDE Position */ +#define SCB_ID_DFR_UDE_Msk (0xFUL << SCB_ID_DFR_UDE_Pos) /*!< SCB ID_DFR: UDE Mask */ + +#define SCB_ID_DFR_MProfDbg_Pos 20U /*!< SCB ID_DFR: MProfDbg Position */ +#define SCB_ID_DFR_MProfDbg_Msk (0xFUL << SCB_ID_DFR_MProfDbg_Pos) /*!< SCB ID_DFR: MProfDbg Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB RAS Fault Status Register Definitions */ +#define SCB_RFSR_V_Pos 31U /*!< SCB RFSR: V Position */ +#define SCB_RFSR_V_Msk (1UL << SCB_RFSR_V_Pos) /*!< SCB RFSR: V Mask */ + +#define SCB_RFSR_IS_Pos 16U /*!< SCB RFSR: IS Position */ +#define SCB_RFSR_IS_Msk (0x7FFFUL << SCB_RFSR_IS_Pos) /*!< SCB RFSR: IS Mask */ + +#define SCB_RFSR_UET_Pos 0U /*!< SCB RFSR: UET Position */ +#define SCB_RFSR_UET_Msk (3UL /*<< SCB_RFSR_UET_Pos*/) /*!< SCB RFSR: UET Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ICB Implementation Control Block register (ICB) + \brief Type definitions for the Implementation Control Block Register + @{ + */ + +/** + \brief Structure type to access the Implementation Control Block (ICB). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} ICB_Type; + +/* Auxiliary Control Register Definitions */ +#define ICB_ACTLR_DISCRITAXIRUW_Pos 27U /*!< ACTLR: DISCRITAXIRUW Position */ +#define ICB_ACTLR_DISCRITAXIRUW_Msk (1UL << ICB_ACTLR_DISCRITAXIRUW_Pos) /*!< ACTLR: DISCRITAXIRUW Mask */ + +#define ICB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define ICB_ACTLR_DISDI_Msk (3UL << ICB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define ICB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define ICB_ACTLR_DISCRITAXIRUR_Msk (1UL << ICB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define ICB_ACTLR_EVENTBUSEN_Pos 14U /*!< ACTLR: EVENTBUSEN Position */ +#define ICB_ACTLR_EVENTBUSEN_Msk (1UL << ICB_ACTLR_EVENTBUSEN_Pos) /*!< ACTLR: EVENTBUSEN Mask */ + +#define ICB_ACTLR_EVENTBUSEN_S_Pos 13U /*!< ACTLR: EVENTBUSEN_S Position */ +#define ICB_ACTLR_EVENTBUSEN_S_Msk (1UL << ICB_ACTLR_EVENTBUSEN_S_Pos) /*!< ACTLR: EVENTBUSEN_S Mask */ + +#define ICB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define ICB_ACTLR_DISITMATBFLUSH_Msk (1UL << ICB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define ICB_ACTLR_DISNWAMODE_Pos 11U /*!< ACTLR: DISNWAMODE Position */ +#define ICB_ACTLR_DISNWAMODE_Msk (1UL << ICB_ACTLR_DISNWAMODE_Pos) /*!< ACTLR: DISNWAMODE Mask */ + +#define ICB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define ICB_ACTLR_FPEXCODIS_Msk (1UL << ICB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define ICB_ACTLR_DISOLAP_Pos 7U /*!< ACTLR: DISOLAP Position */ +#define ICB_ACTLR_DISOLAP_Msk (1UL << ICB_ACTLR_DISOLAP_Pos) /*!< ACTLR: DISOLAP Mask */ + +#define ICB_ACTLR_DISOLAPS_Pos 6U /*!< ACTLR: DISOLAPS Position */ +#define ICB_ACTLR_DISOLAPS_Msk (1UL << ICB_ACTLR_DISOLAPS_Pos) /*!< ACTLR: DISOLAPS Mask */ + +#define ICB_ACTLR_DISLOBR_Pos 5U /*!< ACTLR: DISLOBR Position */ +#define ICB_ACTLR_DISLOBR_Msk (1UL << ICB_ACTLR_DISLOBR_Pos) /*!< ACTLR: DISLOBR Mask */ + +#define ICB_ACTLR_DISLO_Pos 4U /*!< ACTLR: DISLO Position */ +#define ICB_ACTLR_DISLO_Msk (1UL << ICB_ACTLR_DISLO_Pos) /*!< ACTLR: DISLO Mask */ + +#define ICB_ACTLR_DISLOLEP_Pos 3U /*!< ACTLR: DISLOLEP Position */ +#define ICB_ACTLR_DISLOLEP_Msk (1UL << ICB_ACTLR_DISLOLEP_Pos) /*!< ACTLR: DISLOLEP Mask */ + +#define ICB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define ICB_ACTLR_DISFOLD_Msk (1UL << ICB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +/* Interrupt Controller Type Register Definitions */ +#define ICB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define ICB_ICTR_INTLINESNUM_Msk (0xFUL /*<< ICB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_ICB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[3U]; + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) ITM Device Type Register */ + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup MemSysCtl_Type Memory System Control Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Memory System Control Registers (MEMSYSCTL) + @{ + */ + +/** + \brief Structure type to access the Memory System Control Registers (MEMSYSCTL). + */ +typedef struct +{ + __IOM uint32_t MSCR; /*!< Offset: 0x000 (R/W) Memory System Control Register */ + __IOM uint32_t PFCR; /*!< Offset: 0x004 (R/W) Prefetcher Control Register */ + uint32_t RESERVED1[2U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x010 (R/W) ITCM Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x014 (R/W) DTCM Control Register */ + __IOM uint32_t PAHBCR; /*!< Offset: 0x018 (R/W) P-AHB Control Register */ + uint32_t RESERVED2[313U]; + __IOM uint32_t ITGU_CTRL; /*!< Offset: 0x500 (R/W) ITGU Control Register */ + __IOM uint32_t ITGU_CFG; /*!< Offset: 0x504 (R/W) ITGU Configuration Register */ + uint32_t RESERVED3[2U]; + __IOM uint32_t ITGU_LUT[16U]; /*!< Offset: 0x510 (R/W) ITGU Look Up Table Register */ + uint32_t RESERVED4[44U]; + __IOM uint32_t DTGU_CTRL; /*!< Offset: 0x600 (R/W) DTGU Control Registers */ + __IOM uint32_t DTGU_CFG; /*!< Offset: 0x604 (R/W) DTGU Configuration Register */ + uint32_t RESERVED5[2U]; + __IOM uint32_t DTGU_LUT[16U]; /*!< Offset: 0x610 (R/W) DTGU Look Up Table Register */ +} MemSysCtl_Type; + +/* MEMSYSCTL Memory System Control Register (MSCR) Register Definitions */ +#define MEMSYSCTL_MSCR_CPWRDN_Pos 17U /*!< MEMSYSCTL MSCR: CPWRDN Position */ +#define MEMSYSCTL_MSCR_CPWRDN_Msk (0x1UL << MEMSYSCTL_MSCR_CPWRDN_Pos) /*!< MEMSYSCTL MSCR: CPWRDN Mask */ + +#define MEMSYSCTL_MSCR_DCCLEAN_Pos 16U /*!< MEMSYSCTL MSCR: DCCLEAN Position */ +#define MEMSYSCTL_MSCR_DCCLEAN_Msk (0x1UL << MEMSYSCTL_MSCR_DCCLEAN_Pos) /*!< MEMSYSCTL MSCR: DCCLEAN Mask */ + +#define MEMSYSCTL_MSCR_ICACTIVE_Pos 13U /*!< MEMSYSCTL MSCR: ICACTIVE Position */ +#define MEMSYSCTL_MSCR_ICACTIVE_Msk (0x1UL << MEMSYSCTL_MSCR_ICACTIVE_Pos) /*!< MEMSYSCTL MSCR: ICACTIVE Mask */ + +#define MEMSYSCTL_MSCR_DCACTIVE_Pos 12U /*!< MEMSYSCTL MSCR: DCACTIVE Position */ +#define MEMSYSCTL_MSCR_DCACTIVE_Msk (0x1UL << MEMSYSCTL_MSCR_DCACTIVE_Pos) /*!< MEMSYSCTL MSCR: DCACTIVE Mask */ + +#define MEMSYSCTL_MSCR_TECCCHKDIS_Pos 4U /*!< MEMSYSCTL MSCR: TECCCHKDIS Position */ +#define MEMSYSCTL_MSCR_TECCCHKDIS_Msk (0x1UL << MEMSYSCTL_MSCR_TECCCHKDIS_Pos) /*!< MEMSYSCTL MSCR: TECCCHKDIS Mask */ + +#define MEMSYSCTL_MSCR_EVECCFAULT_Pos 3U /*!< MEMSYSCTL MSCR: EVECCFAULT Position */ +#define MEMSYSCTL_MSCR_EVECCFAULT_Msk (0x1UL << MEMSYSCTL_MSCR_EVECCFAULT_Pos) /*!< MEMSYSCTL MSCR: EVECCFAULT Mask */ + +#define MEMSYSCTL_MSCR_FORCEWT_Pos 2U /*!< MEMSYSCTL MSCR: FORCEWT Position */ +#define MEMSYSCTL_MSCR_FORCEWT_Msk (0x1UL << MEMSYSCTL_MSCR_FORCEWT_Pos) /*!< MEMSYSCTL MSCR: FORCEWT Mask */ + +#define MEMSYSCTL_MSCR_ECCEN_Pos 1U /*!< MEMSYSCTL MSCR: ECCEN Position */ +#define MEMSYSCTL_MSCR_ECCEN_Msk (0x1UL << MEMSYSCTL_MSCR_ECCEN_Pos) /*!< MEMSYSCTL MSCR: ECCEN Mask */ + +/* MEMSYSCTL Prefetcher Control Register (PFCR) Register Definitions */ +#define MEMSYSCTL_PFCR_MAX_OS_Pos 7U /*!< MEMSYSCTL PFCR: MAX_OS Position */ +#define MEMSYSCTL_PFCR_MAX_OS_Msk (0x7UL << MEMSYSCTL_PFCR_MAX_OS_Pos) /*!< MEMSYSCTL PFCR: MAX_OS Mask */ + +#define MEMSYSCTL_PFCR_MAX_LA_Pos 4U /*!< MEMSYSCTL PFCR: MAX_LA Position */ +#define MEMSYSCTL_PFCR_MAX_LA_Msk (0x7UL << MEMSYSCTL_PFCR_MAX_LA_Pos) /*!< MEMSYSCTL PFCR: MAX_LA Mask */ + +#define MEMSYSCTL_PFCR_MIN_LA_Pos 1U /*!< MEMSYSCTL PFCR: MIN_LA Position */ +#define MEMSYSCTL_PFCR_MIN_LA_Msk (0x7UL << MEMSYSCTL_PFCR_MIN_LA_Pos) /*!< MEMSYSCTL PFCR: MIN_LA Mask */ + +#define MEMSYSCTL_PFCR_ENABLE_Pos 0U /*!< MEMSYSCTL PFCR: ENABLE Position */ +#define MEMSYSCTL_PFCR_ENABLE_Msk (0x1UL /*<< MEMSYSCTL_PFCR_ENABLE_Pos*/) /*!< MEMSYSCTL PFCR: ENABLE Mask */ + +/* MEMSYSCTL ITCM Control Register (ITCMCR) Register Definitions */ +#define MEMSYSCTL_ITCMCR_SZ_Pos 3U /*!< MEMSYSCTL ITCMCR: SZ Position */ +#define MEMSYSCTL_ITCMCR_SZ_Msk (0xFUL << MEMSYSCTL_ITCMCR_SZ_Pos) /*!< MEMSYSCTL ITCMCR: SZ Mask */ + +#define MEMSYSCTL_ITCMCR_EN_Pos 0U /*!< MEMSYSCTL ITCMCR: EN Position */ +#define MEMSYSCTL_ITCMCR_EN_Msk (0x1UL /*<< MEMSYSCTL_ITCMCR_EN_Pos*/) /*!< MEMSYSCTL ITCMCR: EN Mask */ + +/* MEMSYSCTL DTCM Control Register (DTCMCR) Register Definitions */ +#define MEMSYSCTL_DTCMCR_SZ_Pos 3U /*!< MEMSYSCTL DTCMCR: SZ Position */ +#define MEMSYSCTL_DTCMCR_SZ_Msk (0xFUL << MEMSYSCTL_DTCMCR_SZ_Pos) /*!< MEMSYSCTL DTCMCR: SZ Mask */ + +#define MEMSYSCTL_DTCMCR_EN_Pos 0U /*!< MEMSYSCTL DTCMCR: EN Position */ +#define MEMSYSCTL_DTCMCR_EN_Msk (0x1UL /*<< MEMSYSCTL_DTCMCR_EN_Pos*/) /*!< MEMSYSCTL DTCMCR: EN Mask */ + +/* MEMSYSCTL P-AHB Control Register (PAHBCR) Register Definitions */ +#define MEMSYSCTL_PAHBCR_SZ_Pos 1U /*!< MEMSYSCTL PAHBCR: SZ Position */ +#define MEMSYSCTL_PAHBCR_SZ_Msk (0x7UL << MEMSYSCTL_PAHBCR_SZ_Pos) /*!< MEMSYSCTL PAHBCR: SZ Mask */ + +#define MEMSYSCTL_PAHBCR_EN_Pos 0U /*!< MEMSYSCTL PAHBCR: EN Position */ +#define MEMSYSCTL_PAHBCR_EN_Msk (0x1UL /*<< MEMSYSCTL_PAHBCR_EN_Pos*/) /*!< MEMSYSCTL PAHBCR: EN Mask */ + +/* MEMSYSCTL ITGU Control Register (ITGU_CTRL) Register Definitions */ +#define MEMSYSCTL_ITGU_CTRL_DEREN_Pos 1U /*!< MEMSYSCTL ITGU_CTRL: DEREN Position */ +#define MEMSYSCTL_ITGU_CTRL_DEREN_Msk (0x1UL << MEMSYSCTL_ITGU_CTRL_DEREN_Pos) /*!< MEMSYSCTL ITGU_CTRL: DEREN Mask */ + +#define MEMSYSCTL_ITGU_CTRL_DBFEN_Pos 0U /*!< MEMSYSCTL ITGU_CTRL: DBFEN Position */ +#define MEMSYSCTL_ITGU_CTRL_DBFEN_Msk (0x1UL /*<< MEMSYSCTL_ITGU_CTRL_DBFEN_Pos*/) /*!< MEMSYSCTL ITGU_CTRL: DBFEN Mask */ + +/* MEMSYSCTL ITGU Configuration Register (ITGU_CFG) Register Definitions */ +#define MEMSYSCTL_ITGU_CFG_PRESENT_Pos 31U /*!< MEMSYSCTL ITGU_CFG: PRESENT Position */ +#define MEMSYSCTL_ITGU_CFG_PRESENT_Msk (0x1UL << MEMSYSCTL_ITGU_CFG_PRESENT_Pos) /*!< MEMSYSCTL ITGU_CFG: PRESENT Mask */ + +#define MEMSYSCTL_ITGU_CFG_NUMBLKS_Pos 8U /*!< MEMSYSCTL ITGU_CFG: NUMBLKS Position */ +#define MEMSYSCTL_ITGU_CFG_NUMBLKS_Msk (0xFUL << MEMSYSCTL_ITGU_CFG_NUMBLKS_Pos) /*!< MEMSYSCTL ITGU_CFG: NUMBLKS Mask */ + +#define MEMSYSCTL_ITGU_CFG_BLKSZ_Pos 0U /*!< MEMSYSCTL ITGU_CFG: BLKSZ Position */ +#define MEMSYSCTL_ITGU_CFG_BLKSZ_Msk (0xFUL /*<< MEMSYSCTL_ITGU_CFG_BLKSZ_Pos*/) /*!< MEMSYSCTL ITGU_CFG: BLKSZ Mask */ + +/* MEMSYSCTL DTGU Control Registers (DTGU_CTRL) Register Definitions */ +#define MEMSYSCTL_DTGU_CTRL_DEREN_Pos 1U /*!< MEMSYSCTL DTGU_CTRL: DEREN Position */ +#define MEMSYSCTL_DTGU_CTRL_DEREN_Msk (0x1UL << MEMSYSCTL_DTGU_CTRL_DEREN_Pos) /*!< MEMSYSCTL DTGU_CTRL: DEREN Mask */ + +#define MEMSYSCTL_DTGU_CTRL_DBFEN_Pos 0U /*!< MEMSYSCTL DTGU_CTRL: DBFEN Position */ +#define MEMSYSCTL_DTGU_CTRL_DBFEN_Msk (0x1UL /*<< MEMSYSCTL_DTGU_CTRL_DBFEN_Pos*/) /*!< MEMSYSCTL DTGU_CTRL: DBFEN Mask */ + +/* MEMSYSCTL DTGU Configuration Register (DTGU_CFG) Register Definitions */ +#define MEMSYSCTL_DTGU_CFG_PRESENT_Pos 31U /*!< MEMSYSCTL DTGU_CFG: PRESENT Position */ +#define MEMSYSCTL_DTGU_CFG_PRESENT_Msk (0x1UL << MEMSYSCTL_DTGU_CFG_PRESENT_Pos) /*!< MEMSYSCTL DTGU_CFG: PRESENT Mask */ + +#define MEMSYSCTL_DTGU_CFG_NUMBLKS_Pos 8U /*!< MEMSYSCTL DTGU_CFG: NUMBLKS Position */ +#define MEMSYSCTL_DTGU_CFG_NUMBLKS_Msk (0xFUL << MEMSYSCTL_DTGU_CFG_NUMBLKS_Pos) /*!< MEMSYSCTL DTGU_CFG: NUMBLKS Mask */ + +#define MEMSYSCTL_DTGU_CFG_BLKSZ_Pos 0U /*!< MEMSYSCTL DTGU_CFG: BLKSZ Position */ +#define MEMSYSCTL_DTGU_CFG_BLKSZ_Msk (0xFUL /*<< MEMSYSCTL_DTGU_CFG_BLKSZ_Pos*/) /*!< MEMSYSCTL DTGU_CFG: BLKSZ Mask */ + + +/*@}*/ /* end of group MemSysCtl_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup PwrModCtl_Type Power Mode Control Registers + \brief Type definitions for the Power Mode Control Registers (PWRMODCTL) + @{ + */ + +/** + \brief Structure type to access the Power Mode Control Registers (PWRMODCTL). + */ +typedef struct +{ + __IOM uint32_t CPDLPSTATE; /*!< Offset: 0x000 (R/W) Core Power Domain Low Power State Register */ + __IOM uint32_t DPDLPSTATE; /*!< Offset: 0x004 (R/W) Debug Power Domain Low Power State Register */ +} PwrModCtl_Type; + +/* PWRMODCTL Core Power Domain Low Power State (CPDLPSTATE) Register Definitions */ +#define PWRMODCTL_CPDLPSTATE_RLPSTATE_Pos 8U /*!< PWRMODCTL CPDLPSTATE: RLPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_RLPSTATE_Msk (0x3UL << PWRMODCTL_CPDLPSTATE_RLPSTATE_Pos) /*!< PWRMODCTL CPDLPSTATE: RLPSTATE Mask */ + +#define PWRMODCTL_CPDLPSTATE_ELPSTATE_Pos 4U /*!< PWRMODCTL CPDLPSTATE: ELPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_ELPSTATE_Msk (0x3UL << PWRMODCTL_CPDLPSTATE_ELPSTATE_Pos) /*!< PWRMODCTL CPDLPSTATE: ELPSTATE Mask */ + +#define PWRMODCTL_CPDLPSTATE_CLPSTATE_Pos 0U /*!< PWRMODCTL CPDLPSTATE: CLPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_CLPSTATE_Msk (0x3UL /*<< PWRMODCTL_CPDLPSTATE_CLPSTATE_Pos*/) /*!< PWRMODCTL CPDLPSTATE: CLPSTATE Mask */ + +/* PWRMODCTL Debug Power Domain Low Power State (DPDLPSTATE) Register Definitions */ +#define PWRMODCTL_DPDLPSTATE_DLPSTATE_Pos 0U /*!< PWRMODCTL DPDLPSTATE: DLPSTATE Position */ +#define PWRMODCTL_DPDLPSTATE_DLPSTATE_Msk (0x3UL /*<< PWRMODCTL_DPDLPSTATE_DLPSTATE_Pos*/) /*!< PWRMODCTL DPDLPSTATE: DLPSTATE Mask */ + +/*@}*/ /* end of group PwrModCtl_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup EWIC_Type External Wakeup Interrupt Controller Registers + \brief Type definitions for the External Wakeup Interrupt Controller Registers (EWIC) + @{ + */ + +/** + \brief Structure type to access the External Wakeup Interrupt Controller Registers (EWIC). + */ +typedef struct +{ + __OM uint32_t EVENTSPR; /*!< Offset: 0x000 ( /W) Event Set Pending Register */ + uint32_t RESERVED0[31U]; + __IM uint32_t EVENTMASKA; /*!< Offset: 0x080 (R/W) Event Mask A Register */ + __IM uint32_t EVENTMASK[15]; /*!< Offset: 0x084 (R/W) Event Mask Register */ +} EWIC_Type; + +/* EWIC External Wakeup Interrupt Controller (EVENTSPR) Register Definitions */ +#define EWIC_EVENTSPR_EDBGREQ_Pos 2U /*!< EWIC EVENTSPR: EDBGREQ Position */ +#define EWIC_EVENTSPR_EDBGREQ_Msk (0x1UL << EWIC_EVENTSPR_EDBGREQ_Pos) /*!< EWIC EVENTSPR: EDBGREQ Mask */ + +#define EWIC_EVENTSPR_NMI_Pos 1U /*!< EWIC EVENTSPR: NMI Position */ +#define EWIC_EVENTSPR_NMI_Msk (0x1UL << EWIC_EVENTSPR_NMI_Pos) /*!< EWIC EVENTSPR: NMI Mask */ + +#define EWIC_EVENTSPR_EVENT_Pos 0U /*!< EWIC EVENTSPR: EVENT Position */ +#define EWIC_EVENTSPR_EVENT_Msk (0x1UL /*<< EWIC_EVENTSPR_EVENT_Pos*/) /*!< EWIC EVENTSPR: EVENT Mask */ + +/* EWIC External Wakeup Interrupt Controller (EVENTMASKA) Register Definitions */ +#define EWIC_EVENTMASKA_EDBGREQ_Pos 2U /*!< EWIC EVENTMASKA: EDBGREQ Position */ +#define EWIC_EVENTMASKA_EDBGREQ_Msk (0x1UL << EWIC_EVENTMASKA_EDBGREQ_Pos) /*!< EWIC EVENTMASKA: EDBGREQ Mask */ + +#define EWIC_EVENTMASKA_NMI_Pos 1U /*!< EWIC EVENTMASKA: NMI Position */ +#define EWIC_EVENTMASKA_NMI_Msk (0x1UL << EWIC_EVENTMASKA_NMI_Pos) /*!< EWIC EVENTMASKA: NMI Mask */ + +#define EWIC_EVENTMASKA_EVENT_Pos 0U /*!< EWIC EVENTMASKA: EVENT Position */ +#define EWIC_EVENTMASKA_EVENT_Msk (0x1UL /*<< EWIC_EVENTMASKA_EVENT_Pos*/) /*!< EWIC EVENTMASKA: EVENT Mask */ + +/* EWIC External Wakeup Interrupt Controller (EVENTMASK) Register Definitions */ +#define EWIC_EVENTMASK_IRQ_Pos 0U /*!< EWIC EVENTMASKA: IRQ Position */ +#define EWIC_EVENTMASK_IRQ_Msk (0xFFFFFFFFUL /*<< EWIC_EVENTMASKA_IRQ_Pos*/) /*!< EWIC EVENTMASKA: IRQ Mask */ + +/*@}*/ /* end of group EWIC_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup ErrBnk_Type Error Banking Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Error Banking Registers (ERRBNK) + @{ + */ + +/** + \brief Structure type to access the Error Banking Registers (ERRBNK). + */ +typedef struct +{ + __IOM uint32_t IEBR0; /*!< Offset: 0x000 (R/W) Instruction Cache Error Bank Register 0 */ + __IOM uint32_t IEBR1; /*!< Offset: 0x004 (R/W) Instruction Cache Error Bank Register 1 */ + uint32_t RESERVED0[2U]; + __IOM uint32_t DEBR0; /*!< Offset: 0x010 (R/W) Data Cache Error Bank Register 0 */ + __IOM uint32_t DEBR1; /*!< Offset: 0x014 (R/W) Data Cache Error Bank Register 1 */ + uint32_t RESERVED1[2U]; + __IOM uint32_t TEBR0; /*!< Offset: 0x020 (R/W) TCM Error Bank Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t TEBR1; /*!< Offset: 0x028 (R/W) TCM Error Bank Register 1 */ +} ErrBnk_Type; + +/* ERRBNK Instruction Cache Error Bank Register 0 (IEBR0) Register Definitions */ +#define ERRBNK_IEBR0_SWDEF_Pos 30U /*!< ERRBNK IEBR0: SWDEF Position */ +#define ERRBNK_IEBR0_SWDEF_Msk (0x3UL << ERRBNK_IEBR0_SWDEF_Pos) /*!< ERRBNK IEBR0: SWDEF Mask */ + +#define ERRBNK_IEBR0_BANK_Pos 16U /*!< ERRBNK IEBR0: BANK Position */ +#define ERRBNK_IEBR0_BANK_Msk (0x1UL << ERRBNK_IEBR0_BANK_Pos) /*!< ERRBNK IEBR0: BANK Mask */ + +#define ERRBNK_IEBR0_LOCATION_Pos 2U /*!< ERRBNK IEBR0: LOCATION Position */ +#define ERRBNK_IEBR0_LOCATION_Msk (0x3FFFUL << ERRBNK_IEBR0_LOCATION_Pos) /*!< ERRBNK IEBR0: LOCATION Mask */ + +#define ERRBNK_IEBR0_LOCKED_Pos 1U /*!< ERRBNK IEBR0: LOCKED Position */ +#define ERRBNK_IEBR0_LOCKED_Msk (0x1UL << ERRBNK_IEBR0_LOCKED_Pos) /*!< ERRBNK IEBR0: LOCKED Mask */ + +#define ERRBNK_IEBR0_VALID_Pos 0U /*!< ERRBNK IEBR0: VALID Position */ +#define ERRBNK_IEBR0_VALID_Msk (0x1UL << /*ERRBNK_IEBR0_VALID_Pos*/) /*!< ERRBNK IEBR0: VALID Mask */ + +/* ERRBNK Instruction Cache Error Bank Register 1 (IEBR1) Register Definitions */ +#define ERRBNK_IEBR1_SWDEF_Pos 30U /*!< ERRBNK IEBR1: SWDEF Position */ +#define ERRBNK_IEBR1_SWDEF_Msk (0x3UL << ERRBNK_IEBR1_SWDEF_Pos) /*!< ERRBNK IEBR1: SWDEF Mask */ + +#define ERRBNK_IEBR1_BANK_Pos 16U /*!< ERRBNK IEBR1: BANK Position */ +#define ERRBNK_IEBR1_BANK_Msk (0x1UL << ERRBNK_IEBR1_BANK_Pos) /*!< ERRBNK IEBR1: BANK Mask */ + +#define ERRBNK_IEBR1_LOCATION_Pos 2U /*!< ERRBNK IEBR1: LOCATION Position */ +#define ERRBNK_IEBR1_LOCATION_Msk (0x3FFFUL << ERRBNK_IEBR1_LOCATION_Pos) /*!< ERRBNK IEBR1: LOCATION Mask */ + +#define ERRBNK_IEBR1_LOCKED_Pos 1U /*!< ERRBNK IEBR1: LOCKED Position */ +#define ERRBNK_IEBR1_LOCKED_Msk (0x1UL << ERRBNK_IEBR1_LOCKED_Pos) /*!< ERRBNK IEBR1: LOCKED Mask */ + +#define ERRBNK_IEBR1_VALID_Pos 0U /*!< ERRBNK IEBR1: VALID Position */ +#define ERRBNK_IEBR1_VALID_Msk (0x1UL << /*ERRBNK_IEBR1_VALID_Pos*/) /*!< ERRBNK IEBR1: VALID Mask */ + +/* ERRBNK Data Cache Error Bank Register 0 (DEBR0) Register Definitions */ +#define ERRBNK_DEBR0_SWDEF_Pos 30U /*!< ERRBNK DEBR0: SWDEF Position */ +#define ERRBNK_DEBR0_SWDEF_Msk (0x3UL << ERRBNK_DEBR0_SWDEF_Pos) /*!< ERRBNK DEBR0: SWDEF Mask */ + +#define ERRBNK_DEBR0_TYPE_Pos 17U /*!< ERRBNK DEBR0: TYPE Position */ +#define ERRBNK_DEBR0_TYPE_Msk (0x1UL << ERRBNK_DEBR0_TYPE_Pos) /*!< ERRBNK DEBR0: TYPE Mask */ + +#define ERRBNK_DEBR0_BANK_Pos 16U /*!< ERRBNK DEBR0: BANK Position */ +#define ERRBNK_DEBR0_BANK_Msk (0x1UL << ERRBNK_DEBR0_BANK_Pos) /*!< ERRBNK DEBR0: BANK Mask */ + +#define ERRBNK_DEBR0_LOCATION_Pos 2U /*!< ERRBNK DEBR0: LOCATION Position */ +#define ERRBNK_DEBR0_LOCATION_Msk (0x3FFFUL << ERRBNK_DEBR0_LOCATION_Pos) /*!< ERRBNK DEBR0: LOCATION Mask */ + +#define ERRBNK_DEBR0_LOCKED_Pos 1U /*!< ERRBNK DEBR0: LOCKED Position */ +#define ERRBNK_DEBR0_LOCKED_Msk (0x1UL << ERRBNK_DEBR0_LOCKED_Pos) /*!< ERRBNK DEBR0: LOCKED Mask */ + +#define ERRBNK_DEBR0_VALID_Pos 0U /*!< ERRBNK DEBR0: VALID Position */ +#define ERRBNK_DEBR0_VALID_Msk (0x1UL << /*ERRBNK_DEBR0_VALID_Pos*/) /*!< ERRBNK DEBR0: VALID Mask */ + +/* ERRBNK Data Cache Error Bank Register 1 (DEBR1) Register Definitions */ +#define ERRBNK_DEBR1_SWDEF_Pos 30U /*!< ERRBNK DEBR1: SWDEF Position */ +#define ERRBNK_DEBR1_SWDEF_Msk (0x3UL << ERRBNK_DEBR1_SWDEF_Pos) /*!< ERRBNK DEBR1: SWDEF Mask */ + +#define ERRBNK_DEBR1_TYPE_Pos 17U /*!< ERRBNK DEBR1: TYPE Position */ +#define ERRBNK_DEBR1_TYPE_Msk (0x1UL << ERRBNK_DEBR1_TYPE_Pos) /*!< ERRBNK DEBR1: TYPE Mask */ + +#define ERRBNK_DEBR1_BANK_Pos 16U /*!< ERRBNK DEBR1: BANK Position */ +#define ERRBNK_DEBR1_BANK_Msk (0x1UL << ERRBNK_DEBR1_BANK_Pos) /*!< ERRBNK DEBR1: BANK Mask */ + +#define ERRBNK_DEBR1_LOCATION_Pos 2U /*!< ERRBNK DEBR1: LOCATION Position */ +#define ERRBNK_DEBR1_LOCATION_Msk (0x3FFFUL << ERRBNK_DEBR1_LOCATION_Pos) /*!< ERRBNK DEBR1: LOCATION Mask */ + +#define ERRBNK_DEBR1_LOCKED_Pos 1U /*!< ERRBNK DEBR1: LOCKED Position */ +#define ERRBNK_DEBR1_LOCKED_Msk (0x1UL << ERRBNK_DEBR1_LOCKED_Pos) /*!< ERRBNK DEBR1: LOCKED Mask */ + +#define ERRBNK_DEBR1_VALID_Pos 0U /*!< ERRBNK DEBR1: VALID Position */ +#define ERRBNK_DEBR1_VALID_Msk (0x1UL << /*ERRBNK_DEBR1_VALID_Pos*/) /*!< ERRBNK DEBR1: VALID Mask */ + +/* ERRBNK TCM Error Bank Register 0 (TEBR0) Register Definitions */ +#define ERRBNK_TEBR0_SWDEF_Pos 30U /*!< ERRBNK TEBR0: SWDEF Position */ +#define ERRBNK_TEBR0_SWDEF_Msk (0x3UL << ERRBNK_TEBR0_SWDEF_Pos) /*!< ERRBNK TEBR0: SWDEF Mask */ + +#define ERRBNK_TEBR0_POISON_Pos 28U /*!< ERRBNK TEBR0: POISON Position */ +#define ERRBNK_TEBR0_POISON_Msk (0x1UL << ERRBNK_TEBR0_POISON_Pos) /*!< ERRBNK TEBR0: POISON Mask */ + +#define ERRBNK_TEBR0_TYPE_Pos 27U /*!< ERRBNK TEBR0: TYPE Position */ +#define ERRBNK_TEBR0_TYPE_Msk (0x1UL << ERRBNK_TEBR0_TYPE_Pos) /*!< ERRBNK TEBR0: TYPE Mask */ + +#define ERRBNK_TEBR0_BANK_Pos 24U /*!< ERRBNK TEBR0: BANK Position */ +#define ERRBNK_TEBR0_BANK_Msk (0x3UL << ERRBNK_TEBR0_BANK_Pos) /*!< ERRBNK TEBR0: BANK Mask */ + +#define ERRBNK_TEBR0_LOCATION_Pos 2U /*!< ERRBNK TEBR0: LOCATION Position */ +#define ERRBNK_TEBR0_LOCATION_Msk (0x3FFFFFUL << ERRBNK_TEBR0_LOCATION_Pos) /*!< ERRBNK TEBR0: LOCATION Mask */ + +#define ERRBNK_TEBR0_LOCKED_Pos 1U /*!< ERRBNK TEBR0: LOCKED Position */ +#define ERRBNK_TEBR0_LOCKED_Msk (0x1UL << ERRBNK_TEBR0_LOCKED_Pos) /*!< ERRBNK TEBR0: LOCKED Mask */ + +#define ERRBNK_TEBR0_VALID_Pos 0U /*!< ERRBNK TEBR0: VALID Position */ +#define ERRBNK_TEBR0_VALID_Msk (0x1UL << /*ERRBNK_TEBR0_VALID_Pos*/) /*!< ERRBNK TEBR0: VALID Mask */ + +/* ERRBNK TCM Error Bank Register 1 (TEBR1) Register Definitions */ +#define ERRBNK_TEBR1_SWDEF_Pos 30U /*!< ERRBNK TEBR1: SWDEF Position */ +#define ERRBNK_TEBR1_SWDEF_Msk (0x3UL << ERRBNK_TEBR1_SWDEF_Pos) /*!< ERRBNK TEBR1: SWDEF Mask */ + +#define ERRBNK_TEBR1_POISON_Pos 28U /*!< ERRBNK TEBR1: POISON Position */ +#define ERRBNK_TEBR1_POISON_Msk (0x1UL << ERRBNK_TEBR1_POISON_Pos) /*!< ERRBNK TEBR1: POISON Mask */ + +#define ERRBNK_TEBR1_TYPE_Pos 27U /*!< ERRBNK TEBR1: TYPE Position */ +#define ERRBNK_TEBR1_TYPE_Msk (0x1UL << ERRBNK_TEBR1_TYPE_Pos) /*!< ERRBNK TEBR1: TYPE Mask */ + +#define ERRBNK_TEBR1_BANK_Pos 24U /*!< ERRBNK TEBR1: BANK Position */ +#define ERRBNK_TEBR1_BANK_Msk (0x3UL << ERRBNK_TEBR1_BANK_Pos) /*!< ERRBNK TEBR1: BANK Mask */ + +#define ERRBNK_TEBR1_LOCATION_Pos 2U /*!< ERRBNK TEBR1: LOCATION Position */ +#define ERRBNK_TEBR1_LOCATION_Msk (0x3FFFFFUL << ERRBNK_TEBR1_LOCATION_Pos) /*!< ERRBNK TEBR1: LOCATION Mask */ + +#define ERRBNK_TEBR1_LOCKED_Pos 1U /*!< ERRBNK TEBR1: LOCKED Position */ +#define ERRBNK_TEBR1_LOCKED_Msk (0x1UL << ERRBNK_TEBR1_LOCKED_Pos) /*!< ERRBNK TEBR1: LOCKED Mask */ + +#define ERRBNK_TEBR1_VALID_Pos 0U /*!< ERRBNK TEBR1: VALID Position */ +#define ERRBNK_TEBR1_VALID_Msk (0x1UL << /*ERRBNK_TEBR1_VALID_Pos*/) /*!< ERRBNK TEBR1: VALID Mask */ + +/*@}*/ /* end of group ErrBnk_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup PrcCfgInf_Type Processor Configuration Information Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Processor Configuration Information Registerss (PRCCFGINF) + @{ + */ + +/** + \brief Structure type to access the Processor Configuration Information Registerss (PRCCFGINF). + */ +typedef struct +{ + __OM uint32_t CFGINFOSEL; /*!< Offset: 0x000 ( /W) Processor Configuration Information Selection Register */ + __IM uint32_t CFGINFORD; /*!< Offset: 0x004 (R/ ) Processor Configuration Information Read Data Register */ +} PrcCfgInf_Type; + +/* PRCCFGINF Processor Configuration Information Selection Register (CFGINFOSEL) Definitions */ + +/* PRCCFGINF Processor Configuration Information Read Data Register (CFGINFORD) Definitions */ + +/*@}*/ /* end of group PrcCfgInf_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup STL_Type Software Test Library Observation Registers + \brief Type definitions for the Software Test Library Observation Registerss (STL) + @{ + */ + +/** + \brief Structure type to access the Software Test Library Observation Registerss (STL). + */ +typedef struct +{ + __IM uint32_t STLNVICPENDOR; /*!< Offset: 0x000 (R/ ) NVIC Pending Priority Tree Register */ + __IM uint32_t STLNVICACTVOR; /*!< Offset: 0x004 (R/ ) NVIC Active Priority Tree Register */ + uint32_t RESERVED0[2U]; + __OM uint32_t STLIDMPUSR; /*!< Offset: 0x010 ( /W) MPU Sanple Register */ + __IM uint32_t STLIMPUOR; /*!< Offset: 0x014 (R/ ) MPU Region Hit Register */ + __IM uint32_t STLD0MPUOR; /*!< Offset: 0x018 (R/ ) MPU Memory Attributes Register 0 */ + __IM uint32_t STLD1MPUOR; /*!< Offset: 0x01C (R/ ) MPU Memory Attributes Register 1 */ + +} STL_Type; + +/* STL Software Test Library Observation Register (STLNVICPENDOR) Definitions */ +#define STL_STLNVICPENDOR_VALID_Pos 18U /*!< STL STLNVICPENDOR: VALID Position */ +#define STL_STLNVICPENDOR_VALID_Msk (0x1UL << STL_STLNVICPENDOR_VALID_Pos) /*!< STL STLNVICPENDOR: VALID Mask */ + +#define STL_STLNVICPENDOR_TARGET_Pos 17U /*!< STL STLNVICPENDOR: TARGET Position */ +#define STL_STLNVICPENDOR_TARGET_Msk (0x1UL << STL_STLNVICPENDOR_TARGET_Pos) /*!< STL STLNVICPENDOR: TARGET Mask */ + +#define STL_STLNVICPENDOR_PRIORITY_Pos 9U /*!< STL STLNVICPENDOR: PRIORITY Position */ +#define STL_STLNVICPENDOR_PRIORITY_Msk (0xFFUL << STL_STLNVICPENDOR_PRIORITY_Pos) /*!< STL STLNVICPENDOR: PRIORITY Mask */ + +#define STL_STLNVICPENDOR_INTNUM_Pos 0U /*!< STL STLNVICPENDOR: INTNUM Position */ +#define STL_STLNVICPENDOR_INTNUM_Msk (0x1FFUL /*<< STL_STLNVICPENDOR_INTNUM_Pos*/) /*!< STL STLNVICPENDOR: INTNUM Mask */ + +/* STL Software Test Library Observation Register (STLNVICACTVOR) Definitions */ +#define STL_STLNVICACTVOR_VALID_Pos 18U /*!< STL STLNVICACTVOR: VALID Position */ +#define STL_STLNVICACTVOR_VALID_Msk (0x1UL << STL_STLNVICACTVOR_VALID_Pos) /*!< STL STLNVICACTVOR: VALID Mask */ + +#define STL_STLNVICACTVOR_TARGET_Pos 17U /*!< STL STLNVICACTVOR: TARGET Position */ +#define STL_STLNVICACTVOR_TARGET_Msk (0x1UL << STL_STLNVICACTVOR_TARGET_Pos) /*!< STL STLNVICACTVOR: TARGET Mask */ + +#define STL_STLNVICACTVOR_PRIORITY_Pos 9U /*!< STL STLNVICACTVOR: PRIORITY Position */ +#define STL_STLNVICACTVOR_PRIORITY_Msk (0xFFUL << STL_STLNVICACTVOR_PRIORITY_Pos) /*!< STL STLNVICACTVOR: PRIORITY Mask */ + +#define STL_STLNVICACTVOR_INTNUM_Pos 0U /*!< STL STLNVICACTVOR: INTNUM Position */ +#define STL_STLNVICACTVOR_INTNUM_Msk (0x1FFUL /*<< STL_STLNVICACTVOR_INTNUM_Pos*/) /*!< STL STLNVICACTVOR: INTNUM Mask */ + +/* STL Software Test Library Observation Register (STLIDMPUSR) Definitions */ +#define STL_STLIDMPUSR_ADDR_Pos 5U /*!< STL STLIDMPUSR: ADDR Position */ +#define STL_STLIDMPUSR_ADDR_Msk (0x7FFFFFFUL << STL_STLIDMPUSR_ADDR_Pos) /*!< STL STLIDMPUSR: ADDR Mask */ + +#define STL_STLIDMPUSR_INSTR_Pos 2U /*!< STL STLIDMPUSR: INSTR Position */ +#define STL_STLIDMPUSR_INSTR_Msk (0x1UL << STL_STLIDMPUSR_INSTR_Pos) /*!< STL STLIDMPUSR: INSTR Mask */ + +#define STL_STLIDMPUSR_DATA_Pos 1U /*!< STL STLIDMPUSR: DATA Position */ +#define STL_STLIDMPUSR_DATA_Msk (0x1UL << STL_STLIDMPUSR_DATA_Pos) /*!< STL STLIDMPUSR: DATA Mask */ + +/* STL Software Test Library Observation Register (STLIMPUOR) Definitions */ +#define STL_STLIMPUOR_HITREGION_Pos 9U /*!< STL STLIMPUOR: HITREGION Position */ +#define STL_STLIMPUOR_HITREGION_Msk (0xFFUL << STL_STLIMPUOR_HITREGION_Pos) /*!< STL STLIMPUOR: HITREGION Mask */ + +#define STL_STLIMPUOR_ATTR_Pos 0U /*!< STL STLIMPUOR: ATTR Position */ +#define STL_STLIMPUOR_ATTR_Msk (0x1FFUL /*<< STL_STLIMPUOR_ATTR_Pos*/) /*!< STL STLIMPUOR: ATTR Mask */ + +/* STL Software Test Library Observation Register (STLD0MPUOR) Definitions */ +#define STL_STLD0MPUOR_HITREGION_Pos 9U /*!< STL STLD0MPUOR: HITREGION Position */ +#define STL_STLD0MPUOR_HITREGION_Msk (0xFFUL << STL_STLD0MPUOR_HITREGION_Pos) /*!< STL STLD0MPUOR: HITREGION Mask */ + +#define STL_STLD0MPUOR_ATTR_Pos 0U /*!< STL STLD0MPUOR: ATTR Position */ +#define STL_STLD0MPUOR_ATTR_Msk (0x1FFUL /*<< STL_STLD0MPUOR_ATTR_Pos*/) /*!< STL STLD0MPUOR: ATTR Mask */ + +/* STL Software Test Library Observation Register (STLD1MPUOR) Definitions */ +#define STL_STLD1MPUOR_HITREGION_Pos 9U /*!< STL STLD1MPUOR: HITREGION Position */ +#define STL_STLD1MPUOR_HITREGION_Msk (0xFFUL << STL_STLD1MPUOR_HITREGION_Pos) /*!< STL STLD1MPUOR: HITREGION Mask */ + +#define STL_STLD1MPUOR_ATTR_Pos 0U /*!< STL STLD1MPUOR: ATTR Position */ +#define STL_STLD1MPUOR_ATTR_Msk (0x1FFUL /*<< STL_STLD1MPUOR_ATTR_Pos*/) /*!< STL STLD1MPUOR: ATTR Mask */ + +/*@}*/ /* end of group STL_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFmt_Pos 0U /*!< TPI FFCR: EnFmt Position */ +#define TPI_FFCR_EnFmt_Msk (0x3UL << /*TPI_FFCR_EnFmt_Pos*/) /*!< TPI FFCR: EnFmt Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_PMU Performance Monitoring Unit (PMU) + \brief Type definitions for the Performance Monitoring Unit (PMU) + @{ + */ + +/** + \brief Structure type to access the Performance Monitoring Unit (PMU). + */ +typedef struct +{ + __IOM uint32_t EVCNTR[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x0 (R/W) PMU Event Counter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED0[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCNTR; /*!< Offset: 0x7C (R/W) PMU Cycle Counter Register */ + uint32_t RESERVED1[224]; + __IOM uint32_t EVTYPER[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x400 (R/W) PMU Event Type and Filter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED2[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCFILTR; /*!< Offset: 0x47C (R/W) PMU Cycle Counter Filter Register */ + uint32_t RESERVED3[480]; + __IOM uint32_t CNTENSET; /*!< Offset: 0xC00 (R/W) PMU Count Enable Set Register */ + uint32_t RESERVED4[7]; + __IOM uint32_t CNTENCLR; /*!< Offset: 0xC20 (R/W) PMU Count Enable Clear Register */ + uint32_t RESERVED5[7]; + __IOM uint32_t INTENSET; /*!< Offset: 0xC40 (R/W) PMU Interrupt Enable Set Register */ + uint32_t RESERVED6[7]; + __IOM uint32_t INTENCLR; /*!< Offset: 0xC60 (R/W) PMU Interrupt Enable Clear Register */ + uint32_t RESERVED7[7]; + __IOM uint32_t OVSCLR; /*!< Offset: 0xC80 (R/W) PMU Overflow Flag Status Clear Register */ + uint32_t RESERVED8[7]; + __IOM uint32_t SWINC; /*!< Offset: 0xCA0 (R/W) PMU Software Increment Register */ + uint32_t RESERVED9[7]; + __IOM uint32_t OVSSET; /*!< Offset: 0xCC0 (R/W) PMU Overflow Flag Status Set Register */ + uint32_t RESERVED10[79]; + __IOM uint32_t TYPE; /*!< Offset: 0xE00 (R/W) PMU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0xE04 (R/W) PMU Control Register */ + uint32_t RESERVED11[108]; + __IOM uint32_t AUTHSTATUS; /*!< Offset: 0xFB8 (R/W) PMU Authentication Status Register */ + __IOM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/W) PMU Device Architecture Register */ + uint32_t RESERVED12[3]; + __IOM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/W) PMU Device Type Register */ + __IOM uint32_t PIDR4; /*!< Offset: 0xFD0 (R/W) PMU Peripheral Identification Register 4 */ + uint32_t RESERVED13[3]; + __IOM uint32_t PIDR0; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 0 */ + __IOM uint32_t PIDR1; /*!< Offset: 0xFE4 (R/W) PMU Peripheral Identification Register 1 */ + __IOM uint32_t PIDR2; /*!< Offset: 0xFE8 (R/W) PMU Peripheral Identification Register 2 */ + __IOM uint32_t PIDR3; /*!< Offset: 0xFEC (R/W) PMU Peripheral Identification Register 3 */ + __IOM uint32_t CIDR0; /*!< Offset: 0xFF0 (R/W) PMU Component Identification Register 0 */ + __IOM uint32_t CIDR1; /*!< Offset: 0xFF4 (R/W) PMU Component Identification Register 1 */ + __IOM uint32_t CIDR2; /*!< Offset: 0xFF8 (R/W) PMU Component Identification Register 2 */ + __IOM uint32_t CIDR3; /*!< Offset: 0xFFC (R/W) PMU Component Identification Register 3 */ +} PMU_Type; + +/** \brief PMU Event Counter Registers (0-30) Definitions */ + +#define PMU_EVCNTR_CNT_Pos 0U /*!< PMU EVCNTR: Counter Position */ +#define PMU_EVCNTR_CNT_Msk (0xFFFFUL /*<< PMU_EVCNTRx_CNT_Pos*/) /*!< PMU EVCNTR: Counter Mask */ + +/** \brief PMU Event Type and Filter Registers (0-30) Definitions */ + +#define PMU_EVTYPER_EVENTTOCNT_Pos 0U /*!< PMU EVTYPER: Event to Count Position */ +#define PMU_EVTYPER_EVENTTOCNT_Msk (0xFFFFUL /*<< EVTYPERx_EVENTTOCNT_Pos*/) /*!< PMU EVTYPER: Event to Count Mask */ + +/** \brief PMU Count Enable Set Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENSET: Event Counter 0 Enable Set Position */ +#define PMU_CNTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENSET_CNT0_ENABLE_Pos*/) /*!< PMU CNTENSET: Event Counter 0 Enable Set Mask */ + +#define PMU_CNTENSET_CNT1_ENABLE_Pos 1U /*!< PMU CNTENSET: Event Counter 1 Enable Set Position */ +#define PMU_CNTENSET_CNT1_ENABLE_Msk (1UL << PMU_CNTENSET_CNT1_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 1 Enable Set Mask */ + +#define PMU_CNTENSET_CNT2_ENABLE_Pos 2U /*!< PMU CNTENSET: Event Counter 2 Enable Set Position */ +#define PMU_CNTENSET_CNT2_ENABLE_Msk (1UL << PMU_CNTENSET_CNT2_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 2 Enable Set Mask */ + +#define PMU_CNTENSET_CNT3_ENABLE_Pos 3U /*!< PMU CNTENSET: Event Counter 3 Enable Set Position */ +#define PMU_CNTENSET_CNT3_ENABLE_Msk (1UL << PMU_CNTENSET_CNT3_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 3 Enable Set Mask */ + +#define PMU_CNTENSET_CNT4_ENABLE_Pos 4U /*!< PMU CNTENSET: Event Counter 4 Enable Set Position */ +#define PMU_CNTENSET_CNT4_ENABLE_Msk (1UL << PMU_CNTENSET_CNT4_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 4 Enable Set Mask */ + +#define PMU_CNTENSET_CNT5_ENABLE_Pos 5U /*!< PMU CNTENSET: Event Counter 5 Enable Set Position */ +#define PMU_CNTENSET_CNT5_ENABLE_Msk (1UL << PMU_CNTENSET_CNT5_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 5 Enable Set Mask */ + +#define PMU_CNTENSET_CNT6_ENABLE_Pos 6U /*!< PMU CNTENSET: Event Counter 6 Enable Set Position */ +#define PMU_CNTENSET_CNT6_ENABLE_Msk (1UL << PMU_CNTENSET_CNT6_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 6 Enable Set Mask */ + +#define PMU_CNTENSET_CNT7_ENABLE_Pos 7U /*!< PMU CNTENSET: Event Counter 7 Enable Set Position */ +#define PMU_CNTENSET_CNT7_ENABLE_Msk (1UL << PMU_CNTENSET_CNT7_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 7 Enable Set Mask */ + +#define PMU_CNTENSET_CNT8_ENABLE_Pos 8U /*!< PMU CNTENSET: Event Counter 8 Enable Set Position */ +#define PMU_CNTENSET_CNT8_ENABLE_Msk (1UL << PMU_CNTENSET_CNT8_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 8 Enable Set Mask */ + +#define PMU_CNTENSET_CNT9_ENABLE_Pos 9U /*!< PMU CNTENSET: Event Counter 9 Enable Set Position */ +#define PMU_CNTENSET_CNT9_ENABLE_Msk (1UL << PMU_CNTENSET_CNT9_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 9 Enable Set Mask */ + +#define PMU_CNTENSET_CNT10_ENABLE_Pos 10U /*!< PMU CNTENSET: Event Counter 10 Enable Set Position */ +#define PMU_CNTENSET_CNT10_ENABLE_Msk (1UL << PMU_CNTENSET_CNT10_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 10 Enable Set Mask */ + +#define PMU_CNTENSET_CNT11_ENABLE_Pos 11U /*!< PMU CNTENSET: Event Counter 11 Enable Set Position */ +#define PMU_CNTENSET_CNT11_ENABLE_Msk (1UL << PMU_CNTENSET_CNT11_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 11 Enable Set Mask */ + +#define PMU_CNTENSET_CNT12_ENABLE_Pos 12U /*!< PMU CNTENSET: Event Counter 12 Enable Set Position */ +#define PMU_CNTENSET_CNT12_ENABLE_Msk (1UL << PMU_CNTENSET_CNT12_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 12 Enable Set Mask */ + +#define PMU_CNTENSET_CNT13_ENABLE_Pos 13U /*!< PMU CNTENSET: Event Counter 13 Enable Set Position */ +#define PMU_CNTENSET_CNT13_ENABLE_Msk (1UL << PMU_CNTENSET_CNT13_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 13 Enable Set Mask */ + +#define PMU_CNTENSET_CNT14_ENABLE_Pos 14U /*!< PMU CNTENSET: Event Counter 14 Enable Set Position */ +#define PMU_CNTENSET_CNT14_ENABLE_Msk (1UL << PMU_CNTENSET_CNT14_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 14 Enable Set Mask */ + +#define PMU_CNTENSET_CNT15_ENABLE_Pos 15U /*!< PMU CNTENSET: Event Counter 15 Enable Set Position */ +#define PMU_CNTENSET_CNT15_ENABLE_Msk (1UL << PMU_CNTENSET_CNT15_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 15 Enable Set Mask */ + +#define PMU_CNTENSET_CNT16_ENABLE_Pos 16U /*!< PMU CNTENSET: Event Counter 16 Enable Set Position */ +#define PMU_CNTENSET_CNT16_ENABLE_Msk (1UL << PMU_CNTENSET_CNT16_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 16 Enable Set Mask */ + +#define PMU_CNTENSET_CNT17_ENABLE_Pos 17U /*!< PMU CNTENSET: Event Counter 17 Enable Set Position */ +#define PMU_CNTENSET_CNT17_ENABLE_Msk (1UL << PMU_CNTENSET_CNT17_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 17 Enable Set Mask */ + +#define PMU_CNTENSET_CNT18_ENABLE_Pos 18U /*!< PMU CNTENSET: Event Counter 18 Enable Set Position */ +#define PMU_CNTENSET_CNT18_ENABLE_Msk (1UL << PMU_CNTENSET_CNT18_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 18 Enable Set Mask */ + +#define PMU_CNTENSET_CNT19_ENABLE_Pos 19U /*!< PMU CNTENSET: Event Counter 19 Enable Set Position */ +#define PMU_CNTENSET_CNT19_ENABLE_Msk (1UL << PMU_CNTENSET_CNT19_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 19 Enable Set Mask */ + +#define PMU_CNTENSET_CNT20_ENABLE_Pos 20U /*!< PMU CNTENSET: Event Counter 20 Enable Set Position */ +#define PMU_CNTENSET_CNT20_ENABLE_Msk (1UL << PMU_CNTENSET_CNT20_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 20 Enable Set Mask */ + +#define PMU_CNTENSET_CNT21_ENABLE_Pos 21U /*!< PMU CNTENSET: Event Counter 21 Enable Set Position */ +#define PMU_CNTENSET_CNT21_ENABLE_Msk (1UL << PMU_CNTENSET_CNT21_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 21 Enable Set Mask */ + +#define PMU_CNTENSET_CNT22_ENABLE_Pos 22U /*!< PMU CNTENSET: Event Counter 22 Enable Set Position */ +#define PMU_CNTENSET_CNT22_ENABLE_Msk (1UL << PMU_CNTENSET_CNT22_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 22 Enable Set Mask */ + +#define PMU_CNTENSET_CNT23_ENABLE_Pos 23U /*!< PMU CNTENSET: Event Counter 23 Enable Set Position */ +#define PMU_CNTENSET_CNT23_ENABLE_Msk (1UL << PMU_CNTENSET_CNT23_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 23 Enable Set Mask */ + +#define PMU_CNTENSET_CNT24_ENABLE_Pos 24U /*!< PMU CNTENSET: Event Counter 24 Enable Set Position */ +#define PMU_CNTENSET_CNT24_ENABLE_Msk (1UL << PMU_CNTENSET_CNT24_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 24 Enable Set Mask */ + +#define PMU_CNTENSET_CNT25_ENABLE_Pos 25U /*!< PMU CNTENSET: Event Counter 25 Enable Set Position */ +#define PMU_CNTENSET_CNT25_ENABLE_Msk (1UL << PMU_CNTENSET_CNT25_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 25 Enable Set Mask */ + +#define PMU_CNTENSET_CNT26_ENABLE_Pos 26U /*!< PMU CNTENSET: Event Counter 26 Enable Set Position */ +#define PMU_CNTENSET_CNT26_ENABLE_Msk (1UL << PMU_CNTENSET_CNT26_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 26 Enable Set Mask */ + +#define PMU_CNTENSET_CNT27_ENABLE_Pos 27U /*!< PMU CNTENSET: Event Counter 27 Enable Set Position */ +#define PMU_CNTENSET_CNT27_ENABLE_Msk (1UL << PMU_CNTENSET_CNT27_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 27 Enable Set Mask */ + +#define PMU_CNTENSET_CNT28_ENABLE_Pos 28U /*!< PMU CNTENSET: Event Counter 28 Enable Set Position */ +#define PMU_CNTENSET_CNT28_ENABLE_Msk (1UL << PMU_CNTENSET_CNT28_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 28 Enable Set Mask */ + +#define PMU_CNTENSET_CNT29_ENABLE_Pos 29U /*!< PMU CNTENSET: Event Counter 29 Enable Set Position */ +#define PMU_CNTENSET_CNT29_ENABLE_Msk (1UL << PMU_CNTENSET_CNT29_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 29 Enable Set Mask */ + +#define PMU_CNTENSET_CNT30_ENABLE_Pos 30U /*!< PMU CNTENSET: Event Counter 30 Enable Set Position */ +#define PMU_CNTENSET_CNT30_ENABLE_Msk (1UL << PMU_CNTENSET_CNT30_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 30 Enable Set Mask */ + +#define PMU_CNTENSET_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENSET: Cycle Counter Enable Set Position */ +#define PMU_CNTENSET_CCNTR_ENABLE_Msk (1UL << PMU_CNTENSET_CCNTR_ENABLE_Pos) /*!< PMU CNTENSET: Cycle Counter Enable Set Mask */ + +/** \brief PMU Count Enable Clear Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Position */ +#define PMU_CNTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU CNTENCLR: Event Counter 1 Enable Clear Position */ +#define PMU_CNTENCLR_CNT1_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT1_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 1 Enable Clear */ + +#define PMU_CNTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Position */ +#define PMU_CNTENCLR_CNT2_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT2_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Position */ +#define PMU_CNTENCLR_CNT3_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT3_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Position */ +#define PMU_CNTENCLR_CNT4_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT4_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Position */ +#define PMU_CNTENCLR_CNT5_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT5_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Position */ +#define PMU_CNTENCLR_CNT6_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT6_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Position */ +#define PMU_CNTENCLR_CNT7_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT7_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Position */ +#define PMU_CNTENCLR_CNT8_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT8_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Position */ +#define PMU_CNTENCLR_CNT9_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT9_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Position */ +#define PMU_CNTENCLR_CNT10_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT10_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Position */ +#define PMU_CNTENCLR_CNT11_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT11_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Position */ +#define PMU_CNTENCLR_CNT12_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT12_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Position */ +#define PMU_CNTENCLR_CNT13_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT13_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Position */ +#define PMU_CNTENCLR_CNT14_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT14_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Position */ +#define PMU_CNTENCLR_CNT15_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT15_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Position */ +#define PMU_CNTENCLR_CNT16_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT16_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Position */ +#define PMU_CNTENCLR_CNT17_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT17_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Position */ +#define PMU_CNTENCLR_CNT18_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT18_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Position */ +#define PMU_CNTENCLR_CNT19_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT19_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Position */ +#define PMU_CNTENCLR_CNT20_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT20_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Position */ +#define PMU_CNTENCLR_CNT21_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT21_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Position */ +#define PMU_CNTENCLR_CNT22_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT22_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Position */ +#define PMU_CNTENCLR_CNT23_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT23_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Position */ +#define PMU_CNTENCLR_CNT24_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT24_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Position */ +#define PMU_CNTENCLR_CNT25_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT25_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Position */ +#define PMU_CNTENCLR_CNT26_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT26_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Position */ +#define PMU_CNTENCLR_CNT27_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT27_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Position */ +#define PMU_CNTENCLR_CNT28_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT28_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Position */ +#define PMU_CNTENCLR_CNT29_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT29_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Position */ +#define PMU_CNTENCLR_CNT30_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT30_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Mask */ + +#define PMU_CNTENCLR_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENCLR: Cycle Counter Enable Clear Position */ +#define PMU_CNTENCLR_CCNTR_ENABLE_Msk (1UL << PMU_CNTENCLR_CCNTR_ENABLE_Pos) /*!< PMU CNTENCLR: Cycle Counter Enable Clear Mask */ + +/** \brief PMU Interrupt Enable Set Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENSET_CNT0_ENABLE_Pos*/) /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT1_ENABLE_Pos 1U /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT1_ENABLE_Msk (1UL << PMU_INTENSET_CNT1_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT2_ENABLE_Pos 2U /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT2_ENABLE_Msk (1UL << PMU_INTENSET_CNT2_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT3_ENABLE_Pos 3U /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT3_ENABLE_Msk (1UL << PMU_INTENSET_CNT3_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT4_ENABLE_Pos 4U /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT4_ENABLE_Msk (1UL << PMU_INTENSET_CNT4_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT5_ENABLE_Pos 5U /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT5_ENABLE_Msk (1UL << PMU_INTENSET_CNT5_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT6_ENABLE_Pos 6U /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT6_ENABLE_Msk (1UL << PMU_INTENSET_CNT6_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT7_ENABLE_Pos 7U /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT7_ENABLE_Msk (1UL << PMU_INTENSET_CNT7_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT8_ENABLE_Pos 8U /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT8_ENABLE_Msk (1UL << PMU_INTENSET_CNT8_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT9_ENABLE_Pos 9U /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT9_ENABLE_Msk (1UL << PMU_INTENSET_CNT9_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT10_ENABLE_Pos 10U /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT10_ENABLE_Msk (1UL << PMU_INTENSET_CNT10_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT11_ENABLE_Pos 11U /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT11_ENABLE_Msk (1UL << PMU_INTENSET_CNT11_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT12_ENABLE_Pos 12U /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT12_ENABLE_Msk (1UL << PMU_INTENSET_CNT12_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT13_ENABLE_Pos 13U /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT13_ENABLE_Msk (1UL << PMU_INTENSET_CNT13_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT14_ENABLE_Pos 14U /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT14_ENABLE_Msk (1UL << PMU_INTENSET_CNT14_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT15_ENABLE_Pos 15U /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT15_ENABLE_Msk (1UL << PMU_INTENSET_CNT15_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT16_ENABLE_Pos 16U /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT16_ENABLE_Msk (1UL << PMU_INTENSET_CNT16_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT17_ENABLE_Pos 17U /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT17_ENABLE_Msk (1UL << PMU_INTENSET_CNT17_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT18_ENABLE_Pos 18U /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT18_ENABLE_Msk (1UL << PMU_INTENSET_CNT18_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT19_ENABLE_Pos 19U /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT19_ENABLE_Msk (1UL << PMU_INTENSET_CNT19_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT20_ENABLE_Pos 20U /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT20_ENABLE_Msk (1UL << PMU_INTENSET_CNT20_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT21_ENABLE_Pos 21U /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT21_ENABLE_Msk (1UL << PMU_INTENSET_CNT21_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT22_ENABLE_Pos 22U /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT22_ENABLE_Msk (1UL << PMU_INTENSET_CNT22_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT23_ENABLE_Pos 23U /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT23_ENABLE_Msk (1UL << PMU_INTENSET_CNT23_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT24_ENABLE_Pos 24U /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT24_ENABLE_Msk (1UL << PMU_INTENSET_CNT24_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT25_ENABLE_Pos 25U /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT25_ENABLE_Msk (1UL << PMU_INTENSET_CNT25_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT26_ENABLE_Pos 26U /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT26_ENABLE_Msk (1UL << PMU_INTENSET_CNT26_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT27_ENABLE_Pos 27U /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT27_ENABLE_Msk (1UL << PMU_INTENSET_CNT27_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT28_ENABLE_Pos 28U /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT28_ENABLE_Msk (1UL << PMU_INTENSET_CNT28_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT29_ENABLE_Pos 29U /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT29_ENABLE_Msk (1UL << PMU_INTENSET_CNT29_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT30_ENABLE_Pos 30U /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT30_ENABLE_Msk (1UL << PMU_INTENSET_CNT30_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Position */ +#define PMU_INTENSET_CCYCNT_ENABLE_Msk (1UL << PMU_INTENSET_CYCCNT_ENABLE_Pos) /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Mask */ + +/** \brief PMU Interrupt Enable Clear Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT1_ENABLE_Msk (1UL << PMU_INTENCLR_CNT1_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear */ + +#define PMU_INTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT2_ENABLE_Msk (1UL << PMU_INTENCLR_CNT2_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT3_ENABLE_Msk (1UL << PMU_INTENCLR_CNT3_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT4_ENABLE_Msk (1UL << PMU_INTENCLR_CNT4_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT5_ENABLE_Msk (1UL << PMU_INTENCLR_CNT5_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT6_ENABLE_Msk (1UL << PMU_INTENCLR_CNT6_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT7_ENABLE_Msk (1UL << PMU_INTENCLR_CNT7_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT8_ENABLE_Msk (1UL << PMU_INTENCLR_CNT8_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT9_ENABLE_Msk (1UL << PMU_INTENCLR_CNT9_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT10_ENABLE_Msk (1UL << PMU_INTENCLR_CNT10_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT11_ENABLE_Msk (1UL << PMU_INTENCLR_CNT11_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT12_ENABLE_Msk (1UL << PMU_INTENCLR_CNT12_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT13_ENABLE_Msk (1UL << PMU_INTENCLR_CNT13_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT14_ENABLE_Msk (1UL << PMU_INTENCLR_CNT14_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT15_ENABLE_Msk (1UL << PMU_INTENCLR_CNT15_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT16_ENABLE_Msk (1UL << PMU_INTENCLR_CNT16_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT17_ENABLE_Msk (1UL << PMU_INTENCLR_CNT17_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT18_ENABLE_Msk (1UL << PMU_INTENCLR_CNT18_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT19_ENABLE_Msk (1UL << PMU_INTENCLR_CNT19_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT20_ENABLE_Msk (1UL << PMU_INTENCLR_CNT20_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT21_ENABLE_Msk (1UL << PMU_INTENCLR_CNT21_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT22_ENABLE_Msk (1UL << PMU_INTENCLR_CNT22_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT23_ENABLE_Msk (1UL << PMU_INTENCLR_CNT23_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT24_ENABLE_Msk (1UL << PMU_INTENCLR_CNT24_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT25_ENABLE_Msk (1UL << PMU_INTENCLR_CNT25_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT26_ENABLE_Msk (1UL << PMU_INTENCLR_CNT26_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT27_ENABLE_Msk (1UL << PMU_INTENCLR_CNT27_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT28_ENABLE_Msk (1UL << PMU_INTENCLR_CNT28_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT29_ENABLE_Msk (1UL << PMU_INTENCLR_CNT29_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT30_ENABLE_Msk (1UL << PMU_INTENCLR_CNT30_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CYCCNT_ENABLE_Msk (1UL << PMU_INTENCLR_CYCCNT_ENABLE_Pos) /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Mask */ + +/** \brief PMU Overflow Flag Status Set Register Definitions */ + +#define PMU_OVSSET_CNT0_STATUS_Pos 0U /*!< PMU OVSSET: Event Counter 0 Overflow Set Position */ +#define PMU_OVSSET_CNT0_STATUS_Msk (1UL /*<< PMU_OVSSET_CNT0_STATUS_Pos*/) /*!< PMU OVSSET: Event Counter 0 Overflow Set Mask */ + +#define PMU_OVSSET_CNT1_STATUS_Pos 1U /*!< PMU OVSSET: Event Counter 1 Overflow Set Position */ +#define PMU_OVSSET_CNT1_STATUS_Msk (1UL << PMU_OVSSET_CNT1_STATUS_Pos) /*!< PMU OVSSET: Event Counter 1 Overflow Set Mask */ + +#define PMU_OVSSET_CNT2_STATUS_Pos 2U /*!< PMU OVSSET: Event Counter 2 Overflow Set Position */ +#define PMU_OVSSET_CNT2_STATUS_Msk (1UL << PMU_OVSSET_CNT2_STATUS_Pos) /*!< PMU OVSSET: Event Counter 2 Overflow Set Mask */ + +#define PMU_OVSSET_CNT3_STATUS_Pos 3U /*!< PMU OVSSET: Event Counter 3 Overflow Set Position */ +#define PMU_OVSSET_CNT3_STATUS_Msk (1UL << PMU_OVSSET_CNT3_STATUS_Pos) /*!< PMU OVSSET: Event Counter 3 Overflow Set Mask */ + +#define PMU_OVSSET_CNT4_STATUS_Pos 4U /*!< PMU OVSSET: Event Counter 4 Overflow Set Position */ +#define PMU_OVSSET_CNT4_STATUS_Msk (1UL << PMU_OVSSET_CNT4_STATUS_Pos) /*!< PMU OVSSET: Event Counter 4 Overflow Set Mask */ + +#define PMU_OVSSET_CNT5_STATUS_Pos 5U /*!< PMU OVSSET: Event Counter 5 Overflow Set Position */ +#define PMU_OVSSET_CNT5_STATUS_Msk (1UL << PMU_OVSSET_CNT5_STATUS_Pos) /*!< PMU OVSSET: Event Counter 5 Overflow Set Mask */ + +#define PMU_OVSSET_CNT6_STATUS_Pos 6U /*!< PMU OVSSET: Event Counter 6 Overflow Set Position */ +#define PMU_OVSSET_CNT6_STATUS_Msk (1UL << PMU_OVSSET_CNT6_STATUS_Pos) /*!< PMU OVSSET: Event Counter 6 Overflow Set Mask */ + +#define PMU_OVSSET_CNT7_STATUS_Pos 7U /*!< PMU OVSSET: Event Counter 7 Overflow Set Position */ +#define PMU_OVSSET_CNT7_STATUS_Msk (1UL << PMU_OVSSET_CNT7_STATUS_Pos) /*!< PMU OVSSET: Event Counter 7 Overflow Set Mask */ + +#define PMU_OVSSET_CNT8_STATUS_Pos 8U /*!< PMU OVSSET: Event Counter 8 Overflow Set Position */ +#define PMU_OVSSET_CNT8_STATUS_Msk (1UL << PMU_OVSSET_CNT8_STATUS_Pos) /*!< PMU OVSSET: Event Counter 8 Overflow Set Mask */ + +#define PMU_OVSSET_CNT9_STATUS_Pos 9U /*!< PMU OVSSET: Event Counter 9 Overflow Set Position */ +#define PMU_OVSSET_CNT9_STATUS_Msk (1UL << PMU_OVSSET_CNT9_STATUS_Pos) /*!< PMU OVSSET: Event Counter 9 Overflow Set Mask */ + +#define PMU_OVSSET_CNT10_STATUS_Pos 10U /*!< PMU OVSSET: Event Counter 10 Overflow Set Position */ +#define PMU_OVSSET_CNT10_STATUS_Msk (1UL << PMU_OVSSET_CNT10_STATUS_Pos) /*!< PMU OVSSET: Event Counter 10 Overflow Set Mask */ + +#define PMU_OVSSET_CNT11_STATUS_Pos 11U /*!< PMU OVSSET: Event Counter 11 Overflow Set Position */ +#define PMU_OVSSET_CNT11_STATUS_Msk (1UL << PMU_OVSSET_CNT11_STATUS_Pos) /*!< PMU OVSSET: Event Counter 11 Overflow Set Mask */ + +#define PMU_OVSSET_CNT12_STATUS_Pos 12U /*!< PMU OVSSET: Event Counter 12 Overflow Set Position */ +#define PMU_OVSSET_CNT12_STATUS_Msk (1UL << PMU_OVSSET_CNT12_STATUS_Pos) /*!< PMU OVSSET: Event Counter 12 Overflow Set Mask */ + +#define PMU_OVSSET_CNT13_STATUS_Pos 13U /*!< PMU OVSSET: Event Counter 13 Overflow Set Position */ +#define PMU_OVSSET_CNT13_STATUS_Msk (1UL << PMU_OVSSET_CNT13_STATUS_Pos) /*!< PMU OVSSET: Event Counter 13 Overflow Set Mask */ + +#define PMU_OVSSET_CNT14_STATUS_Pos 14U /*!< PMU OVSSET: Event Counter 14 Overflow Set Position */ +#define PMU_OVSSET_CNT14_STATUS_Msk (1UL << PMU_OVSSET_CNT14_STATUS_Pos) /*!< PMU OVSSET: Event Counter 14 Overflow Set Mask */ + +#define PMU_OVSSET_CNT15_STATUS_Pos 15U /*!< PMU OVSSET: Event Counter 15 Overflow Set Position */ +#define PMU_OVSSET_CNT15_STATUS_Msk (1UL << PMU_OVSSET_CNT15_STATUS_Pos) /*!< PMU OVSSET: Event Counter 15 Overflow Set Mask */ + +#define PMU_OVSSET_CNT16_STATUS_Pos 16U /*!< PMU OVSSET: Event Counter 16 Overflow Set Position */ +#define PMU_OVSSET_CNT16_STATUS_Msk (1UL << PMU_OVSSET_CNT16_STATUS_Pos) /*!< PMU OVSSET: Event Counter 16 Overflow Set Mask */ + +#define PMU_OVSSET_CNT17_STATUS_Pos 17U /*!< PMU OVSSET: Event Counter 17 Overflow Set Position */ +#define PMU_OVSSET_CNT17_STATUS_Msk (1UL << PMU_OVSSET_CNT17_STATUS_Pos) /*!< PMU OVSSET: Event Counter 17 Overflow Set Mask */ + +#define PMU_OVSSET_CNT18_STATUS_Pos 18U /*!< PMU OVSSET: Event Counter 18 Overflow Set Position */ +#define PMU_OVSSET_CNT18_STATUS_Msk (1UL << PMU_OVSSET_CNT18_STATUS_Pos) /*!< PMU OVSSET: Event Counter 18 Overflow Set Mask */ + +#define PMU_OVSSET_CNT19_STATUS_Pos 19U /*!< PMU OVSSET: Event Counter 19 Overflow Set Position */ +#define PMU_OVSSET_CNT19_STATUS_Msk (1UL << PMU_OVSSET_CNT19_STATUS_Pos) /*!< PMU OVSSET: Event Counter 19 Overflow Set Mask */ + +#define PMU_OVSSET_CNT20_STATUS_Pos 20U /*!< PMU OVSSET: Event Counter 20 Overflow Set Position */ +#define PMU_OVSSET_CNT20_STATUS_Msk (1UL << PMU_OVSSET_CNT20_STATUS_Pos) /*!< PMU OVSSET: Event Counter 20 Overflow Set Mask */ + +#define PMU_OVSSET_CNT21_STATUS_Pos 21U /*!< PMU OVSSET: Event Counter 21 Overflow Set Position */ +#define PMU_OVSSET_CNT21_STATUS_Msk (1UL << PMU_OVSSET_CNT21_STATUS_Pos) /*!< PMU OVSSET: Event Counter 21 Overflow Set Mask */ + +#define PMU_OVSSET_CNT22_STATUS_Pos 22U /*!< PMU OVSSET: Event Counter 22 Overflow Set Position */ +#define PMU_OVSSET_CNT22_STATUS_Msk (1UL << PMU_OVSSET_CNT22_STATUS_Pos) /*!< PMU OVSSET: Event Counter 22 Overflow Set Mask */ + +#define PMU_OVSSET_CNT23_STATUS_Pos 23U /*!< PMU OVSSET: Event Counter 23 Overflow Set Position */ +#define PMU_OVSSET_CNT23_STATUS_Msk (1UL << PMU_OVSSET_CNT23_STATUS_Pos) /*!< PMU OVSSET: Event Counter 23 Overflow Set Mask */ + +#define PMU_OVSSET_CNT24_STATUS_Pos 24U /*!< PMU OVSSET: Event Counter 24 Overflow Set Position */ +#define PMU_OVSSET_CNT24_STATUS_Msk (1UL << PMU_OVSSET_CNT24_STATUS_Pos) /*!< PMU OVSSET: Event Counter 24 Overflow Set Mask */ + +#define PMU_OVSSET_CNT25_STATUS_Pos 25U /*!< PMU OVSSET: Event Counter 25 Overflow Set Position */ +#define PMU_OVSSET_CNT25_STATUS_Msk (1UL << PMU_OVSSET_CNT25_STATUS_Pos) /*!< PMU OVSSET: Event Counter 25 Overflow Set Mask */ + +#define PMU_OVSSET_CNT26_STATUS_Pos 26U /*!< PMU OVSSET: Event Counter 26 Overflow Set Position */ +#define PMU_OVSSET_CNT26_STATUS_Msk (1UL << PMU_OVSSET_CNT26_STATUS_Pos) /*!< PMU OVSSET: Event Counter 26 Overflow Set Mask */ + +#define PMU_OVSSET_CNT27_STATUS_Pos 27U /*!< PMU OVSSET: Event Counter 27 Overflow Set Position */ +#define PMU_OVSSET_CNT27_STATUS_Msk (1UL << PMU_OVSSET_CNT27_STATUS_Pos) /*!< PMU OVSSET: Event Counter 27 Overflow Set Mask */ + +#define PMU_OVSSET_CNT28_STATUS_Pos 28U /*!< PMU OVSSET: Event Counter 28 Overflow Set Position */ +#define PMU_OVSSET_CNT28_STATUS_Msk (1UL << PMU_OVSSET_CNT28_STATUS_Pos) /*!< PMU OVSSET: Event Counter 28 Overflow Set Mask */ + +#define PMU_OVSSET_CNT29_STATUS_Pos 29U /*!< PMU OVSSET: Event Counter 29 Overflow Set Position */ +#define PMU_OVSSET_CNT29_STATUS_Msk (1UL << PMU_OVSSET_CNT29_STATUS_Pos) /*!< PMU OVSSET: Event Counter 29 Overflow Set Mask */ + +#define PMU_OVSSET_CNT30_STATUS_Pos 30U /*!< PMU OVSSET: Event Counter 30 Overflow Set Position */ +#define PMU_OVSSET_CNT30_STATUS_Msk (1UL << PMU_OVSSET_CNT30_STATUS_Pos) /*!< PMU OVSSET: Event Counter 30 Overflow Set Mask */ + +#define PMU_OVSSET_CYCCNT_STATUS_Pos 31U /*!< PMU OVSSET: Cycle Counter Overflow Set Position */ +#define PMU_OVSSET_CYCCNT_STATUS_Msk (1UL << PMU_OVSSET_CYCCNT_STATUS_Pos) /*!< PMU OVSSET: Cycle Counter Overflow Set Mask */ + +/** \brief PMU Overflow Flag Status Clear Register Definitions */ + +#define PMU_OVSCLR_CNT0_STATUS_Pos 0U /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Position */ +#define PMU_OVSCLR_CNT0_STATUS_Msk (1UL /*<< PMU_OVSCLR_CNT0_STATUS_Pos*/) /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT1_STATUS_Pos 1U /*!< PMU OVSCLR: Event Counter 1 Overflow Clear Position */ +#define PMU_OVSCLR_CNT1_STATUS_Msk (1UL << PMU_OVSCLR_CNT1_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 1 Overflow Clear */ + +#define PMU_OVSCLR_CNT2_STATUS_Pos 2U /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Position */ +#define PMU_OVSCLR_CNT2_STATUS_Msk (1UL << PMU_OVSCLR_CNT2_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT3_STATUS_Pos 3U /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Position */ +#define PMU_OVSCLR_CNT3_STATUS_Msk (1UL << PMU_OVSCLR_CNT3_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT4_STATUS_Pos 4U /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Position */ +#define PMU_OVSCLR_CNT4_STATUS_Msk (1UL << PMU_OVSCLR_CNT4_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT5_STATUS_Pos 5U /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Position */ +#define PMU_OVSCLR_CNT5_STATUS_Msk (1UL << PMU_OVSCLR_CNT5_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT6_STATUS_Pos 6U /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Position */ +#define PMU_OVSCLR_CNT6_STATUS_Msk (1UL << PMU_OVSCLR_CNT6_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT7_STATUS_Pos 7U /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Position */ +#define PMU_OVSCLR_CNT7_STATUS_Msk (1UL << PMU_OVSCLR_CNT7_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT8_STATUS_Pos 8U /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Position */ +#define PMU_OVSCLR_CNT8_STATUS_Msk (1UL << PMU_OVSCLR_CNT8_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT9_STATUS_Pos 9U /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Position */ +#define PMU_OVSCLR_CNT9_STATUS_Msk (1UL << PMU_OVSCLR_CNT9_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT10_STATUS_Pos 10U /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Position */ +#define PMU_OVSCLR_CNT10_STATUS_Msk (1UL << PMU_OVSCLR_CNT10_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT11_STATUS_Pos 11U /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Position */ +#define PMU_OVSCLR_CNT11_STATUS_Msk (1UL << PMU_OVSCLR_CNT11_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT12_STATUS_Pos 12U /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Position */ +#define PMU_OVSCLR_CNT12_STATUS_Msk (1UL << PMU_OVSCLR_CNT12_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT13_STATUS_Pos 13U /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Position */ +#define PMU_OVSCLR_CNT13_STATUS_Msk (1UL << PMU_OVSCLR_CNT13_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT14_STATUS_Pos 14U /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Position */ +#define PMU_OVSCLR_CNT14_STATUS_Msk (1UL << PMU_OVSCLR_CNT14_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT15_STATUS_Pos 15U /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Position */ +#define PMU_OVSCLR_CNT15_STATUS_Msk (1UL << PMU_OVSCLR_CNT15_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT16_STATUS_Pos 16U /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Position */ +#define PMU_OVSCLR_CNT16_STATUS_Msk (1UL << PMU_OVSCLR_CNT16_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT17_STATUS_Pos 17U /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Position */ +#define PMU_OVSCLR_CNT17_STATUS_Msk (1UL << PMU_OVSCLR_CNT17_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT18_STATUS_Pos 18U /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Position */ +#define PMU_OVSCLR_CNT18_STATUS_Msk (1UL << PMU_OVSCLR_CNT18_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT19_STATUS_Pos 19U /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Position */ +#define PMU_OVSCLR_CNT19_STATUS_Msk (1UL << PMU_OVSCLR_CNT19_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT20_STATUS_Pos 20U /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Position */ +#define PMU_OVSCLR_CNT20_STATUS_Msk (1UL << PMU_OVSCLR_CNT20_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT21_STATUS_Pos 21U /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Position */ +#define PMU_OVSCLR_CNT21_STATUS_Msk (1UL << PMU_OVSCLR_CNT21_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT22_STATUS_Pos 22U /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Position */ +#define PMU_OVSCLR_CNT22_STATUS_Msk (1UL << PMU_OVSCLR_CNT22_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT23_STATUS_Pos 23U /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Position */ +#define PMU_OVSCLR_CNT23_STATUS_Msk (1UL << PMU_OVSCLR_CNT23_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT24_STATUS_Pos 24U /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Position */ +#define PMU_OVSCLR_CNT24_STATUS_Msk (1UL << PMU_OVSCLR_CNT24_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT25_STATUS_Pos 25U /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Position */ +#define PMU_OVSCLR_CNT25_STATUS_Msk (1UL << PMU_OVSCLR_CNT25_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT26_STATUS_Pos 26U /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Position */ +#define PMU_OVSCLR_CNT26_STATUS_Msk (1UL << PMU_OVSCLR_CNT26_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT27_STATUS_Pos 27U /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Position */ +#define PMU_OVSCLR_CNT27_STATUS_Msk (1UL << PMU_OVSCLR_CNT27_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT28_STATUS_Pos 28U /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Position */ +#define PMU_OVSCLR_CNT28_STATUS_Msk (1UL << PMU_OVSCLR_CNT28_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT29_STATUS_Pos 29U /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Position */ +#define PMU_OVSCLR_CNT29_STATUS_Msk (1UL << PMU_OVSCLR_CNT29_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT30_STATUS_Pos 30U /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Position */ +#define PMU_OVSCLR_CNT30_STATUS_Msk (1UL << PMU_OVSCLR_CNT30_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Mask */ + +#define PMU_OVSCLR_CYCCNT_STATUS_Pos 31U /*!< PMU OVSCLR: Cycle Counter Overflow Clear Position */ +#define PMU_OVSCLR_CYCCNT_STATUS_Msk (1UL << PMU_OVSCLR_CYCCNT_STATUS_Pos) /*!< PMU OVSCLR: Cycle Counter Overflow Clear Mask */ + +/** \brief PMU Software Increment Counter */ + +#define PMU_SWINC_CNT0_Pos 0U /*!< PMU SWINC: Event Counter 0 Software Increment Position */ +#define PMU_SWINC_CNT0_Msk (1UL /*<< PMU_SWINC_CNT0_Pos */) /*!< PMU SWINC: Event Counter 0 Software Increment Mask */ + +#define PMU_SWINC_CNT1_Pos 1U /*!< PMU SWINC: Event Counter 1 Software Increment Position */ +#define PMU_SWINC_CNT1_Msk (1UL << PMU_SWINC_CNT1_Pos) /*!< PMU SWINC: Event Counter 1 Software Increment Mask */ + +#define PMU_SWINC_CNT2_Pos 2U /*!< PMU SWINC: Event Counter 2 Software Increment Position */ +#define PMU_SWINC_CNT2_Msk (1UL << PMU_SWINC_CNT2_Pos) /*!< PMU SWINC: Event Counter 2 Software Increment Mask */ + +#define PMU_SWINC_CNT3_Pos 3U /*!< PMU SWINC: Event Counter 3 Software Increment Position */ +#define PMU_SWINC_CNT3_Msk (1UL << PMU_SWINC_CNT3_Pos) /*!< PMU SWINC: Event Counter 3 Software Increment Mask */ + +#define PMU_SWINC_CNT4_Pos 4U /*!< PMU SWINC: Event Counter 4 Software Increment Position */ +#define PMU_SWINC_CNT4_Msk (1UL << PMU_SWINC_CNT4_Pos) /*!< PMU SWINC: Event Counter 4 Software Increment Mask */ + +#define PMU_SWINC_CNT5_Pos 5U /*!< PMU SWINC: Event Counter 5 Software Increment Position */ +#define PMU_SWINC_CNT5_Msk (1UL << PMU_SWINC_CNT5_Pos) /*!< PMU SWINC: Event Counter 5 Software Increment Mask */ + +#define PMU_SWINC_CNT6_Pos 6U /*!< PMU SWINC: Event Counter 6 Software Increment Position */ +#define PMU_SWINC_CNT6_Msk (1UL << PMU_SWINC_CNT6_Pos) /*!< PMU SWINC: Event Counter 6 Software Increment Mask */ + +#define PMU_SWINC_CNT7_Pos 7U /*!< PMU SWINC: Event Counter 7 Software Increment Position */ +#define PMU_SWINC_CNT7_Msk (1UL << PMU_SWINC_CNT7_Pos) /*!< PMU SWINC: Event Counter 7 Software Increment Mask */ + +#define PMU_SWINC_CNT8_Pos 8U /*!< PMU SWINC: Event Counter 8 Software Increment Position */ +#define PMU_SWINC_CNT8_Msk (1UL << PMU_SWINC_CNT8_Pos) /*!< PMU SWINC: Event Counter 8 Software Increment Mask */ + +#define PMU_SWINC_CNT9_Pos 9U /*!< PMU SWINC: Event Counter 9 Software Increment Position */ +#define PMU_SWINC_CNT9_Msk (1UL << PMU_SWINC_CNT9_Pos) /*!< PMU SWINC: Event Counter 9 Software Increment Mask */ + +#define PMU_SWINC_CNT10_Pos 10U /*!< PMU SWINC: Event Counter 10 Software Increment Position */ +#define PMU_SWINC_CNT10_Msk (1UL << PMU_SWINC_CNT10_Pos) /*!< PMU SWINC: Event Counter 10 Software Increment Mask */ + +#define PMU_SWINC_CNT11_Pos 11U /*!< PMU SWINC: Event Counter 11 Software Increment Position */ +#define PMU_SWINC_CNT11_Msk (1UL << PMU_SWINC_CNT11_Pos) /*!< PMU SWINC: Event Counter 11 Software Increment Mask */ + +#define PMU_SWINC_CNT12_Pos 12U /*!< PMU SWINC: Event Counter 12 Software Increment Position */ +#define PMU_SWINC_CNT12_Msk (1UL << PMU_SWINC_CNT12_Pos) /*!< PMU SWINC: Event Counter 12 Software Increment Mask */ + +#define PMU_SWINC_CNT13_Pos 13U /*!< PMU SWINC: Event Counter 13 Software Increment Position */ +#define PMU_SWINC_CNT13_Msk (1UL << PMU_SWINC_CNT13_Pos) /*!< PMU SWINC: Event Counter 13 Software Increment Mask */ + +#define PMU_SWINC_CNT14_Pos 14U /*!< PMU SWINC: Event Counter 14 Software Increment Position */ +#define PMU_SWINC_CNT14_Msk (1UL << PMU_SWINC_CNT14_Pos) /*!< PMU SWINC: Event Counter 14 Software Increment Mask */ + +#define PMU_SWINC_CNT15_Pos 15U /*!< PMU SWINC: Event Counter 15 Software Increment Position */ +#define PMU_SWINC_CNT15_Msk (1UL << PMU_SWINC_CNT15_Pos) /*!< PMU SWINC: Event Counter 15 Software Increment Mask */ + +#define PMU_SWINC_CNT16_Pos 16U /*!< PMU SWINC: Event Counter 16 Software Increment Position */ +#define PMU_SWINC_CNT16_Msk (1UL << PMU_SWINC_CNT16_Pos) /*!< PMU SWINC: Event Counter 16 Software Increment Mask */ + +#define PMU_SWINC_CNT17_Pos 17U /*!< PMU SWINC: Event Counter 17 Software Increment Position */ +#define PMU_SWINC_CNT17_Msk (1UL << PMU_SWINC_CNT17_Pos) /*!< PMU SWINC: Event Counter 17 Software Increment Mask */ + +#define PMU_SWINC_CNT18_Pos 18U /*!< PMU SWINC: Event Counter 18 Software Increment Position */ +#define PMU_SWINC_CNT18_Msk (1UL << PMU_SWINC_CNT18_Pos) /*!< PMU SWINC: Event Counter 18 Software Increment Mask */ + +#define PMU_SWINC_CNT19_Pos 19U /*!< PMU SWINC: Event Counter 19 Software Increment Position */ +#define PMU_SWINC_CNT19_Msk (1UL << PMU_SWINC_CNT19_Pos) /*!< PMU SWINC: Event Counter 19 Software Increment Mask */ + +#define PMU_SWINC_CNT20_Pos 20U /*!< PMU SWINC: Event Counter 20 Software Increment Position */ +#define PMU_SWINC_CNT20_Msk (1UL << PMU_SWINC_CNT20_Pos) /*!< PMU SWINC: Event Counter 20 Software Increment Mask */ + +#define PMU_SWINC_CNT21_Pos 21U /*!< PMU SWINC: Event Counter 21 Software Increment Position */ +#define PMU_SWINC_CNT21_Msk (1UL << PMU_SWINC_CNT21_Pos) /*!< PMU SWINC: Event Counter 21 Software Increment Mask */ + +#define PMU_SWINC_CNT22_Pos 22U /*!< PMU SWINC: Event Counter 22 Software Increment Position */ +#define PMU_SWINC_CNT22_Msk (1UL << PMU_SWINC_CNT22_Pos) /*!< PMU SWINC: Event Counter 22 Software Increment Mask */ + +#define PMU_SWINC_CNT23_Pos 23U /*!< PMU SWINC: Event Counter 23 Software Increment Position */ +#define PMU_SWINC_CNT23_Msk (1UL << PMU_SWINC_CNT23_Pos) /*!< PMU SWINC: Event Counter 23 Software Increment Mask */ + +#define PMU_SWINC_CNT24_Pos 24U /*!< PMU SWINC: Event Counter 24 Software Increment Position */ +#define PMU_SWINC_CNT24_Msk (1UL << PMU_SWINC_CNT24_Pos) /*!< PMU SWINC: Event Counter 24 Software Increment Mask */ + +#define PMU_SWINC_CNT25_Pos 25U /*!< PMU SWINC: Event Counter 25 Software Increment Position */ +#define PMU_SWINC_CNT25_Msk (1UL << PMU_SWINC_CNT25_Pos) /*!< PMU SWINC: Event Counter 25 Software Increment Mask */ + +#define PMU_SWINC_CNT26_Pos 26U /*!< PMU SWINC: Event Counter 26 Software Increment Position */ +#define PMU_SWINC_CNT26_Msk (1UL << PMU_SWINC_CNT26_Pos) /*!< PMU SWINC: Event Counter 26 Software Increment Mask */ + +#define PMU_SWINC_CNT27_Pos 27U /*!< PMU SWINC: Event Counter 27 Software Increment Position */ +#define PMU_SWINC_CNT27_Msk (1UL << PMU_SWINC_CNT27_Pos) /*!< PMU SWINC: Event Counter 27 Software Increment Mask */ + +#define PMU_SWINC_CNT28_Pos 28U /*!< PMU SWINC: Event Counter 28 Software Increment Position */ +#define PMU_SWINC_CNT28_Msk (1UL << PMU_SWINC_CNT28_Pos) /*!< PMU SWINC: Event Counter 28 Software Increment Mask */ + +#define PMU_SWINC_CNT29_Pos 29U /*!< PMU SWINC: Event Counter 29 Software Increment Position */ +#define PMU_SWINC_CNT29_Msk (1UL << PMU_SWINC_CNT29_Pos) /*!< PMU SWINC: Event Counter 29 Software Increment Mask */ + +#define PMU_SWINC_CNT30_Pos 30U /*!< PMU SWINC: Event Counter 30 Software Increment Position */ +#define PMU_SWINC_CNT30_Msk (1UL << PMU_SWINC_CNT30_Pos) /*!< PMU SWINC: Event Counter 30 Software Increment Mask */ + +/** \brief PMU Control Register Definitions */ + +#define PMU_CTRL_ENABLE_Pos 0U /*!< PMU CTRL: ENABLE Position */ +#define PMU_CTRL_ENABLE_Msk (1UL /*<< PMU_CTRL_ENABLE_Pos*/) /*!< PMU CTRL: ENABLE Mask */ + +#define PMU_CTRL_EVENTCNT_RESET_Pos 1U /*!< PMU CTRL: Event Counter Reset Position */ +#define PMU_CTRL_EVENTCNT_RESET_Msk (1UL << PMU_CTRL_EVENTCNT_RESET_Pos) /*!< PMU CTRL: Event Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_RESET_Pos 2U /*!< PMU CTRL: Cycle Counter Reset Position */ +#define PMU_CTRL_CYCCNT_RESET_Msk (1UL << PMU_CTRL_CYCCNT_RESET_Pos) /*!< PMU CTRL: Cycle Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_DISABLE_Pos 5U /*!< PMU CTRL: Disable Cycle Counter Position */ +#define PMU_CTRL_CYCCNT_DISABLE_Msk (1UL << PMU_CTRL_CYCCNT_DISABLE_Pos) /*!< PMU CTRL: Disable Cycle Counter Mask */ + +#define PMU_CTRL_FRZ_ON_OV_Pos 9U /*!< PMU CTRL: Freeze-on-overflow Position */ +#define PMU_CTRL_FRZ_ON_OV_Msk (1UL << PMU_CTRL_FRZ_ON_OVERFLOW_Pos) /*!< PMU CTRL: Freeze-on-overflow Mask */ + +#define PMU_CTRL_TRACE_ON_OV_Pos 11U /*!< PMU CTRL: Trace-on-overflow Position */ +#define PMU_CTRL_TRACE_ON_OV_Msk (1UL << PMU_CTRL_TRACE_ON_OVERFLOW_Pos) /*!< PMU CTRL: Trace-on-overflow Mask */ + +/** \brief PMU Type Register Definitions */ + +#define PMU_TYPE_NUM_CNTS_Pos 0U /*!< PMU TYPE: Number of Counters Position */ +#define PMU_TYPE_NUM_CNTS_Msk (0xFFUL /*<< PMU_TYPE_NUM_CNTS_Pos*/) /*!< PMU TYPE: Number of Counters Mask */ + +#define PMU_TYPE_SIZE_CNTS_Pos 8U /*!< PMU TYPE: Size of Counters Position */ +#define PMU_TYPE_SIZE_CNTS_Msk (0x3FUL << PMU_TYPE_SIZE_CNTS_Pos) /*!< PMU TYPE: Size of Counters Mask */ + +#define PMU_TYPE_CYCCNT_PRESENT_Pos 14U /*!< PMU TYPE: Cycle Counter Present Position */ +#define PMU_TYPE_CYCCNT_PRESENT_Msk (1UL << PMU_TYPE_CYCCNT_PRESENT_Pos) /*!< PMU TYPE: Cycle Counter Present Mask */ + +#define PMU_TYPE_FRZ_OV_SUPPORT_Pos 21U /*!< PMU TYPE: Freeze-on-overflow Support Position */ +#define PMU_TYPE_FRZ_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Freeze-on-overflow Support Mask */ + +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Pos 23U /*!< PMU TYPE: Trace-on-overflow Support Position */ +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Trace-on-overflow Support Mask */ + +/** \brief PMU Authentication Status Register Definitions */ + +#define PMU_AUTHSTATUS_NSID_Pos 0U /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSID_Msk (0x3UL /*<< PMU_AUTHSTATUS_NSID_Pos*/) /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSNID_Pos 2U /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSNID_Msk (0x3UL << PMU_AUTHSTATUS_NSNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SID_Pos 4U /*!< PMU AUTHSTATUS: Secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_SID_Msk (0x3UL << PMU_AUTHSTATUS_SID_Pos) /*!< PMU AUTHSTATUS: Secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SNID_Pos 6U /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SNID_Msk (0x3UL << PMU_AUTHSTATUS_SNID_Pos) /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUID_Pos 16U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUID_Msk (0x3UL << PMU_AUTHSTATUS_NSUID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUNID_Pos 18U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUNID_Msk (0x3UL << PMU_AUTHSTATUS_NSUNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUID_Pos 20U /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_SUID_Msk (0x3UL << PMU_AUTHSTATUS_SUID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUNID_Pos 22U /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SUNID_Msk (0x3UL << PMU_AUTHSTATUS_SUNID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Mask */ + + +/*@} end of group CMSIS_PMU */ +#endif + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +#define FPU_FPDSCR_FZ16_Pos 19U /*!< FPDSCR: FZ16 bit Position */ +#define FPU_FPDSCR_FZ16_Msk (1UL << FPU_FPDSCR_FZ16_Pos) /*!< FPDSCR: FZ16 bit Mask */ + +#define FPU_FPDSCR_LTPSIZE_Pos 16U /*!< FPDSCR: LTPSIZE bit Position */ +#define FPU_FPDSCR_LTPSIZE_Msk (7UL << FPU_FPDSCR_LTPSIZE_Pos) /*!< FPDSCR: LTPSIZE bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FPRound_Pos 28U /*!< MVFR0: FPRound bits Position */ +#define FPU_MVFR0_FPRound_Msk (0xFUL << FPU_MVFR0_FPRound_Pos) /*!< MVFR0: FPRound bits Mask */ + +#define FPU_MVFR0_FPSqrt_Pos 20U /*!< MVFR0: FPSqrt bits Position */ +#define FPU_MVFR0_FPSqrt_Msk (0xFUL << FPU_MVFR0_FPSqrt_Pos) /*!< MVFR0: FPSqrt bits Mask */ + +#define FPU_MVFR0_FPDivide_Pos 16U /*!< MVFR0: FPDivide bits Position */ +#define FPU_MVFR0_FPDivide_Msk (0xFUL << FPU_MVFR0_FPDivide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FPDP_Pos 8U /*!< MVFR0: FPDP bits Position */ +#define FPU_MVFR0_FPDP_Msk (0xFUL << FPU_MVFR0_FPDP_Pos) /*!< MVFR0: FPDP bits Mask */ + +#define FPU_MVFR0_FPSP_Pos 4U /*!< MVFR0: FPSP bits Position */ +#define FPU_MVFR0_FPSP_Msk (0xFUL << FPU_MVFR0_FPSP_Pos) /*!< MVFR0: FPSP bits Mask */ + +#define FPU_MVFR0_SIMDReg_Pos 0U /*!< MVFR0: SIMDReg bits Position */ +#define FPU_MVFR0_SIMDReg_Msk (0xFUL /*<< FPU_MVFR0_SIMDReg_Pos*/) /*!< MVFR0: SIMDReg bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FMAC_Pos 28U /*!< MVFR1: FMAC bits Position */ +#define FPU_MVFR1_FMAC_Msk (0xFUL << FPU_MVFR1_FMAC_Pos) /*!< MVFR1: FMAC bits Mask */ + +#define FPU_MVFR1_FPHP_Pos 24U /*!< MVFR1: FPHP bits Position */ +#define FPU_MVFR1_FPHP_Msk (0xFUL << FPU_MVFR1_FPHP_Pos) /*!< MVFR1: FPHP bits Mask */ + +#define FPU_MVFR1_FP16_Pos 20U /*!< MVFR1: FP16 bits Position */ +#define FPU_MVFR1_FP16_Msk (0xFUL << FPU_MVFR1_FP16_Pos) /*!< MVFR1: FP16 bits Mask */ + +#define FPU_MVFR1_MVE_Pos 8U /*!< MVFR1: MVE bits Position */ +#define FPU_MVFR1_MVE_Msk (0xFUL << FPU_MVFR1_MVE_Pos) /*!< MVFR1: MVE bits Mask */ + +#define FPU_MVFR1_FPDNaN_Pos 4U /*!< MVFR1: FPDNaN bits Position */ +#define FPU_MVFR1_FPDNaN_Msk (0xFUL << FPU_MVFR1_FPDNaN_Pos) /*!< MVFR1: FPDNaN bits Mask */ + +#define FPU_MVFR1_FPFtZ_Pos 0U /*!< MVFR1: FPFtZ bits Position */ +#define FPU_MVFR1_FPFtZ_Msk (0xFUL /*<< FPU_MVFR1_FPFtZ_Pos*/) /*!< MVFR1: FPFtZ bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_FPD_Pos 23U /*!< \deprecated CoreDebug DHCSR: S_FPD Position */ +#define CoreDebug_DHCSR_S_FPD_Msk (1UL << CoreDebug_DHCSR_S_FPD_Pos) /*!< \deprecated CoreDebug DHCSR: S_FPD Mask */ + +#define CoreDebug_DHCSR_S_SUIDE_Pos 22U /*!< \deprecated CoreDebug DHCSR: S_SUIDE Position */ +#define CoreDebug_DHCSR_S_SUIDE_Msk (1UL << CoreDebug_DHCSR_S_SUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SUIDE Mask */ + +#define CoreDebug_DHCSR_S_NSUIDE_Pos 21U /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Position */ +#define CoreDebug_DHCSR_S_NSUIDE_Msk (1UL << CoreDebug_DHCSR_S_NSUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Mask */ + +#define CoreDebug_DHCSR_S_SDE_Pos 20U /*!< \deprecated CoreDebug DHCSR: S_SDE Position */ +#define CoreDebug_DHCSR_S_SDE_Msk (1UL << CoreDebug_DHCSR_S_SDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SDE Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_PMOV_Pos 6U /*!< \deprecated CoreDebug DHCSR: C_PMOV Position */ +#define CoreDebug_DHCSR_C_PMOV_Msk (1UL << CoreDebug_DHCSR_C_PMOV_Pos) /*!< \deprecated CoreDebug DHCSR: C_PMOV Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Set Clear Exception and Monitor Control Register Definitions */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_REQ_Pos 3U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_SET_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_PEND_Pos 1U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_SET_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_UIDEN_Pos 10U /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_UIDAPEN_Pos 9U /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDAPEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDAPEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Mask */ + +#define CoreDebug_DAUTHCTRL_FSDMA_Pos 8U /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Position */ +#define CoreDebug_DAUTHCTRL_FSDMA_Msk (1UL << CoreDebug_DAUTHCTRL_FSDMA_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_FPD_Pos 23U /*!< DCB DHCSR: Floating-point registers Debuggable Position */ +#define DCB_DHCSR_S_FPD_Msk (0x1UL << DCB_DHCSR_S_FPD_Pos) /*!< DCB DHCSR: Floating-point registers Debuggable Mask */ + +#define DCB_DHCSR_S_SUIDE_Pos 22U /*!< DCB DHCSR: Secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_SUIDE_Msk (0x1UL << DCB_DHCSR_S_SUIDE_Pos) /*!< DCB DHCSR: Secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_NSUIDE_Pos 21U /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_NSUIDE_Msk (0x1UL << DCB_DHCSR_S_NSUIDE_Pos) /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_PMOV_Pos 6U /*!< DCB DHCSR: Halt on PMU overflow control Position */ +#define DCB_DHCSR_C_PMOV_Msk (0x1UL << DCB_DHCSR_C_PMOV_Pos) /*!< DCB DHCSR: Halt on PMU overflow control Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DSCEMCR, Debug Set Clear Exception and Monitor Control Register Definitions */ +#define DCB_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< DCB DSCEMCR: Clear monitor request Position */ +#define DCB_DSCEMCR_CLR_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_REQ_Pos) /*!< DCB DSCEMCR: Clear monitor request Mask */ + +#define DCB_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< DCB DSCEMCR: Clear monitor pend Position */ +#define DCB_DSCEMCR_CLR_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_PEND_Pos) /*!< DCB DSCEMCR: Clear monitor pend Mask */ + +#define DCB_DSCEMCR_SET_MON_REQ_Pos 3U /*!< DCB DSCEMCR: Set monitor request Position */ +#define DCB_DSCEMCR_SET_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_SET_MON_REQ_Pos) /*!< DCB DSCEMCR: Set monitor request Mask */ + +#define DCB_DSCEMCR_SET_MON_PEND_Pos 1U /*!< DCB DSCEMCR: Set monitor pend Position */ +#define DCB_DSCEMCR_SET_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_SET_MON_PEND_Pos) /*!< DCB DSCEMCR: Set monitor pend Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_UIDEN_Pos 10U /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Position */ +#define DCB_DAUTHCTRL_UIDEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Mask */ + +#define DCB_DAUTHCTRL_UIDAPEN_Pos 9U /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Position */ +#define DCB_DAUTHCTRL_UIDAPEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDAPEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Mask */ + +#define DCB_DAUTHCTRL_FSDMA_Pos 8U /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Position */ +#define DCB_DAUTHCTRL_FSDMA_Msk (0x1UL << DCB_DAUTHCTRL_FSDMA_Pos) /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Mask */ + +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SUNID_Pos 22U /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUNID_Msk (0x3UL << DIB_DAUTHSTATUS_SUNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SUID_Pos 20U /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUID_Msk (0x3UL << DIB_DAUTHSTATUS_SUID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_NSUNID_Pos 18U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Position */ +#define DIB_DAUTHSTATUS_NSUNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Mask */ + +#define DIB_DAUTHSTATUS_NSUID_Pos 16U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_NSUID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define MEMSYSCTL_BASE (0xE001E000UL) /*!< Memory System Control Base Address */ + #define ERRBNK_BASE (0xE001E100UL) /*!< Error Banking Base Address */ + #define PWRMODCTL_BASE (0xE001E300UL) /*!< Power Mode Control Base Address */ + #define EWIC_BASE (0xE001E400UL) /*!< External Wakeup Interrupt Controller Base Address */ + #define PRCCFGINF_BASE (0xE001E700UL) /*!< Processor Configuration Information Base Address */ + #define STL_BASE (0xE001E800UL) /*!< Software Test Library Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define ICB ((ICB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define MEMSYSCTL ((MemSysCtl_Type *) MEMSYSCTL_BASE ) /*!< Memory System Control configuration struct */ + #define ERRBNK ((ErrBnk_Type *) ERRBNK_BASE ) /*!< Error Banking configuration struct */ + #define PWRMODCTL ((PwrModCtl_Type *) PWRMODCTL_BASE ) /*!< Power Mode Control configuration struct */ + #define EWIC ((EWIC_Type *) EWIC_BASE ) /*!< EWIC configuration struct */ + #define PRCCFGINF ((PrcCfgInf_Type *) PRCCFGINF_BASE ) /*!< Processor Configuration Information configuration struct */ + #define STL ((STL_Type *) STL_BASE ) /*!< Software Test Library configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + #define PMU_BASE (0xE0003000UL) /*!< PMU Base Address */ + #define PMU ((PMU_Type *) PMU_BASE ) /*!< PMU configuration struct */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define ICB_NS ((ICB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ + +/* 'SCnSCB' is deprecated and replaced by 'ICB' */ +typedef ICB_Type SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISCRITAXIRUW_Pos (ICB_ACTLR_DISCRITAXIRUW_Pos) +#define SCnSCB_ACTLR_DISCRITAXIRUW_Msk (ICB_ACTLR_DISCRITAXIRUW_Msk) + +#define SCnSCB_ACTLR_DISDI_Pos (ICB_ACTLR_DISDI_Pos) +#define SCnSCB_ACTLR_DISDI_Msk (ICB_ACTLR_DISDI_Msk) + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos (ICB_ACTLR_DISCRITAXIRUR_Pos) +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (ICB_ACTLR_DISCRITAXIRUR_Msk) + +#define SCnSCB_ACTLR_EVENTBUSEN_Pos (ICB_ACTLR_EVENTBUSEN_Pos) +#define SCnSCB_ACTLR_EVENTBUSEN_Msk (ICB_ACTLR_EVENTBUSEN_Msk) + +#define SCnSCB_ACTLR_EVENTBUSEN_S_Pos (ICB_ACTLR_EVENTBUSEN_S_Pos) +#define SCnSCB_ACTLR_EVENTBUSEN_S_Msk (ICB_ACTLR_EVENTBUSEN_S_Msk) + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos (ICB_ACTLR_DISITMATBFLUSH_Pos) +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (ICB_ACTLR_DISITMATBFLUSH_Msk) + +#define SCnSCB_ACTLR_DISNWAMODE_Pos (ICB_ACTLR_DISNWAMODE_Pos) +#define SCnSCB_ACTLR_DISNWAMODE_Msk (ICB_ACTLR_DISNWAMODE_Msk) + +#define SCnSCB_ACTLR_FPEXCODIS_Pos (ICB_ACTLR_FPEXCODIS_Pos) +#define SCnSCB_ACTLR_FPEXCODIS_Msk (ICB_ACTLR_FPEXCODIS_Msk) + +#define SCnSCB_ACTLR_DISOLAP_Pos (ICB_ACTLR_DISOLAP_Pos) +#define SCnSCB_ACTLR_DISOLAP_Msk (ICB_ACTLR_DISOLAP_Msk) + +#define SCnSCB_ACTLR_DISOLAPS_Pos (ICB_ACTLR_DISOLAPS_Pos) +#define SCnSCB_ACTLR_DISOLAPS_Msk (ICB_ACTLR_DISOLAPS_Msk) + +#define SCnSCB_ACTLR_DISLOBR_Pos (ICB_ACTLR_DISLOBR_Pos) +#define SCnSCB_ACTLR_DISLOBR_Msk (ICB_ACTLR_DISLOBR_Msk) + +#define SCnSCB_ACTLR_DISLO_Pos (ICB_ACTLR_DISLO_Pos) +#define SCnSCB_ACTLR_DISLO_Msk (ICB_ACTLR_DISLO_Msk) + +#define SCnSCB_ACTLR_DISLOLEP_Pos (ICB_ACTLR_DISLOLEP_Pos) +#define SCnSCB_ACTLR_DISLOLEP_Msk (ICB_ACTLR_DISLOLEP_Msk) + +#define SCnSCB_ACTLR_DISFOLD_Pos (ICB_ACTLR_DISFOLD_Pos) +#define SCnSCB_ACTLR_DISFOLD_Msk (ICB_ACTLR_DISFOLD_Msk) + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos (ICB_ICTR_INTLINESNUM_Pos) +#define SCnSCB_ICTR_INTLINESNUM_Msk (ICB_ICTR_INTLINESNUM_Msk) + +#define SCnSCB (ICB) +#define SCnSCB_NS (ICB_NS) + +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## PMU functions and events #################################### */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + +#include "pmu_armv8.h" + +/** + \brief Cortex-M55 PMU events + \note Architectural PMU events can be found in pmu_armv8.h +*/ + +#define ARMCM55_PMU_ECC_ERR 0xC000 /*!< Any ECC error */ +#define ARMCM55_PMU_ECC_ERR_FATAL 0xC001 /*!< Any fatal ECC error */ +#define ARMCM55_PMU_ECC_ERR_DCACHE 0xC010 /*!< Any ECC error in the data cache */ +#define ARMCM55_PMU_ECC_ERR_ICACHE 0xC011 /*!< Any ECC error in the instruction cache */ +#define ARMCM55_PMU_ECC_ERR_FATAL_DCACHE 0xC012 /*!< Any fatal ECC error in the data cache */ +#define ARMCM55_PMU_ECC_ERR_FATAL_ICACHE 0xC013 /*!< Any fatal ECC error in the instruction cache*/ +#define ARMCM55_PMU_ECC_ERR_DTCM 0xC020 /*!< Any ECC error in the DTCM */ +#define ARMCM55_PMU_ECC_ERR_ITCM 0xC021 /*!< Any ECC error in the ITCM */ +#define ARMCM55_PMU_ECC_ERR_FATAL_DTCM 0xC022 /*!< Any fatal ECC error in the DTCM */ +#define ARMCM55_PMU_ECC_ERR_FATAL_ITCM 0xC023 /*!< Any fatal ECC error in the ITCM */ +#define ARMCM55_PMU_PF_LINEFILL 0xC100 /*!< A prefetcher starts a line-fill */ +#define ARMCM55_PMU_PF_CANCEL 0xC101 /*!< A prefetcher stops prefetching */ +#define ARMCM55_PMU_PF_DROP_LINEFILL 0xC102 /*!< A linefill triggered by a prefetcher has been dropped because of lack of buffering */ +#define ARMCM55_PMU_NWAMODE_ENTER 0xC200 /*!< No write-allocate mode entry */ +#define ARMCM55_PMU_NWAMODE 0xC201 /*!< Write-allocate store is not allocated into the data cache due to no-write-allocate mode */ +#define ARMCM55_PMU_SAHB_ACCESS 0xC300 /*!< Read or write access on the S-AHB interface to the TCM */ +#define ARMCM55_PMU_PAHB_ACCESS 0xC301 /*!< Read or write access to the P-AHB write interface */ +#define ARMCM55_PMU_AXI_WRITE_ACCESS 0xC302 /*!< Any beat access to M-AXI write interface */ +#define ARMCM55_PMU_AXI_READ_ACCESS 0xC303 /*!< Any beat access to M-AXI read interface */ +#define ARMCM55_PMU_DOSTIMEOUT_DOUBLE 0xC400 /*!< Denial of Service timeout has fired twice and caused buffers to drain to allow forward progress */ +#define ARMCM55_PMU_DOSTIMEOUT_TRIPLE 0xC401 /*!< Denial of Service timeout has fired three times and blocked the LSU to force forward progress */ + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + +/* ########################## MVE functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_MveFunctions MVE Functions + \brief Function that provides MVE type. + @{ + */ + +/** + \brief get MVE type + \details returns the MVE type + \returns + - \b 0: No Vector Extension (MVE) + - \b 1: Integer Vector Extension (MVE-I) + - \b 2: Floating-point Vector Extension (MVE-F) + */ +__STATIC_INLINE uint32_t SCB_GetMVEType(void) +{ + const uint32_t mvfr1 = FPU->MVFR1; + if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x2U << FPU_MVFR1_MVE_Pos)) + { + return 2U; + } + else if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x1U << FPU_MVFR1_MVE_Pos)) + { + return 1U; + } + else + { + return 0U; + } +} + + +/*@} end of CMSIS_Core_MveFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM55_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm7.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm7.h similarity index 92% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm7.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm7.h index a14dc62..010506e 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_cm7.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm7.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm7.h * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 + * @version V5.1.6 + * @date 04. June 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -86,7 +86,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) #define __FPU_USED 1U #else @@ -209,6 +209,11 @@ #warning "__DTCM_PRESENT not defined in device header file; using default!" #endif + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + #ifndef __NVIC_PRIO_BITS #define __NVIC_PRIO_BITS 3U #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" @@ -423,7 +428,7 @@ typedef struct __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[24U]; __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; + uint32_t RESERVED1[24U]; __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[24U]; __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -496,7 +501,8 @@ typedef struct __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ + uint32_t RESERVED7[5U]; __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ @@ -671,22 +677,22 @@ typedef struct #define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ #define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ #define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ #define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ #define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ #define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ #define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ /* BusFault Status Register (part of SCB Configurable Fault Status Register) */ @@ -870,21 +876,24 @@ typedef struct #define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ #define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ +#define SCB_CACR_ECCEN_Pos 1U /*!< \deprecated SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< \deprecated SCB CACR: ECCEN Mask */ + +#define SCB_CACR_ECCDIS_Pos 1U /*!< SCB CACR: ECCDIS Position */ +#define SCB_CACR_ECCDIS_Msk (1UL << SCB_CACR_ECCDIS_Pos) /*!< SCB CACR: ECCDIS Mask */ #define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ #define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ /* AHBS Control Register Definitions */ #define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBSCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ #define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBSCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ #define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBSCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ /* Auxiliary Bus Fault Status Register Definitions */ #define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ @@ -930,6 +939,24 @@ typedef struct #define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ /* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + #define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ #define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ @@ -1024,10 +1051,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -1078,18 +1102,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1325,13 +1337,13 @@ typedef struct /* TPI Integration ETM Data Register Definitions (FIFO0) */ #define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ #define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ #define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ #define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ #define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ #define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ @@ -1354,13 +1366,13 @@ typedef struct /* TPI Integration ITM Data Register Definitions (FIFO1) */ #define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ #define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ #define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ #define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ #define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ #define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ @@ -1617,6 +1629,9 @@ typedef struct /* Media and FP Feature Register 2 Definitions */ +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + /*@} end of group CMSIS_FPU */ @@ -1897,7 +1912,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -2122,6 +2139,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } @@ -2161,6 +2179,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) /*@} end of CMSIS_Core_NVICFunctions */ + /* ########################## MPU functions #################################### */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) @@ -2169,6 +2188,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) #endif + /* ########################## FPU functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface @@ -2204,340 +2224,15 @@ __STATIC_INLINE uint32_t SCB_GetFPUType(void) } } - /*@} end of CMSIS_Core_FpuFunctions */ - /* ########################## Cache functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_CacheFunctions Cache Functions - \brief Functions that configure Instruction and Data cache. - @{ - */ - -/* Cache Size ID Register Macros */ -#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) -#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) - - -/** - \brief Enable I-Cache - \details Turns on I-Cache - */ -__STATIC_INLINE void SCB_EnableICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->ICIALLU = 0UL; /* invalidate I-Cache */ - __DSB(); - __ISB(); - SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Disable I-Cache - \details Turns off I-Cache - */ -__STATIC_INLINE void SCB_DisableICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ - SCB->ICIALLU = 0UL; /* invalidate I-Cache */ - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Invalidate I-Cache - \details Invalidates I-Cache - */ -__STATIC_INLINE void SCB_InvalidateICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->ICIALLU = 0UL; - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Enable D-Cache - \details Turns on D-Cache - */ -__STATIC_INLINE void SCB_EnableDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | - ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - __DSB(); - - SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Disable D-Cache - \details Turns off D-Cache - */ -__STATIC_INLINE void SCB_DisableDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean & invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | - ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Invalidate D-Cache - \details Invalidates D-Cache - */ -__STATIC_INLINE void SCB_InvalidateDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | - ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Clean D-Cache - \details Cleans D-Cache - */ -__STATIC_INLINE void SCB_CleanDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | - ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Clean & Invalidate D-Cache - \details Cleans and Invalidates D-Cache - */ -__STATIC_INLINE void SCB_CleanInvalidateDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean & invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | - ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Invalidate by address - \details Invalidates D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t)addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCIMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Clean by address - \details Cleans D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCCMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Clean and Invalidate by address - \details Cleans and invalidates D_Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCCIMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/*@} end of CMSIS_Core_CacheFunctions */ +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif /* ################################## SysTick function ############################################ */ diff --git a/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm85.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm85.h new file mode 100644 index 0000000..6046311 --- /dev/null +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_cm85.h @@ -0,0 +1,4672 @@ +/**************************************************************************//** + * @file core_cm85.h + * @brief CMSIS Cortex-M85 Core Peripheral Access Layer Header File + * @version V1.0.4 + * @date 21. April 2022 + ******************************************************************************/ +/* + * Copyright (c) 2022 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM85_H_GENERIC +#define __CORE_CM85_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M85 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM85 definitions */ + +#define __CORTEX_M (85U) /*!< Cortex-M Core */ + +#if defined ( __CC_ARM ) + #error Legacy Arm Compiler does not support Armv8.1-M target architecture. +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM85_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM85_H_DEPENDANT +#define __CORE_CM85_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM85_REV + #define __CM85_REV 0x0001U + #warning "__CM85_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #if __FPU_PRESENT != 0U + #ifndef __FPU_DP + #define __FPU_DP 0U + #warning "__FPU_DP not defined in device header file; using default!" + #endif + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __PMU_PRESENT + #define __PMU_PRESENT 0U + #warning "__PMU_PRESENT not defined in device header file; using default!" + #endif + + #if __PMU_PRESENT != 0U + #ifndef __PMU_NUM_EVENTCNT + #define __PMU_NUM_EVENTCNT 8U + #warning "__PMU_NUM_EVENTCNT not defined in device header file; using default!" + #elif (__PMU_NUM_EVENTCNT > 8 || __PMU_NUM_EVENTCNT < 2) + #error "__PMU_NUM_EVENTCNT is out of range in device header file!" */ + #endif + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M85 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core EWIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core PMU Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:1; /*!< bit: 20 Reserved */ + uint32_t B:1; /*!< bit: 21 BTI active (read 0) */ + uint32_t _reserved2:2; /*!< bit: 22..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_B_Pos 21U /*!< xPSR: B Position */ +#define xPSR_B_Msk (1UL << xPSR_B_Pos) /*!< xPSR: B Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t BTI_EN:1; /*!< bit: 4 Privileged branch target identification enable */ + uint32_t UBTI_EN:1; /*!< bit: 5 Unprivileged branch target identification enable */ + uint32_t PAC_EN:1; /*!< bit: 6 Privileged pointer authentication enable */ + uint32_t UPAC_EN:1; /*!< bit: 7 Unprivileged pointer authentication enable */ + uint32_t _reserved1:24; /*!< bit: 8..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_UPAC_EN_Pos 7U /*!< CONTROL: UPAC_EN Position */ +#define CONTROL_UPAC_EN_Msk (1UL << CONTROL_UPAC_EN_Pos) /*!< CONTROL: UPAC_EN Mask */ + +#define CONTROL_PAC_EN_Pos 6U /*!< CONTROL: PAC_EN Position */ +#define CONTROL_PAC_EN_Msk (1UL << CONTROL_PAC_EN_Pos) /*!< CONTROL: PAC_EN Mask */ + +#define CONTROL_UBTI_EN_Pos 5U /*!< CONTROL: UBTI_EN Position */ +#define CONTROL_UBTI_EN_Msk (1UL << CONTROL_UBTI_EN_Pos) /*!< CONTROL: UBTI_EN Mask */ + +#define CONTROL_BTI_EN_Pos 4U /*!< CONTROL: BTI_EN Position */ +#define CONTROL_BTI_EN_Msk (1UL << CONTROL_BTI_EN_Pos) /*!< CONTROL: BTI_EN Mask */ + +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + __IOM uint32_t RFSR; /*!< Offset: 0x204 (R/W) RAS Fault Status Register */ + uint32_t RESERVED4[14U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_IESB_Pos 5U /*!< SCB AIRCR: Implicit ESB Enable Position */ +#define SCB_AIRCR_IESB_Msk (1UL << SCB_AIRCR_IESB_Pos) /*!< SCB AIRCR: Implicit ESB Enable Mask */ + +#define SCB_AIRCR_DIT_Pos 4U /*!< SCB AIRCR: Data Independent Timing Position */ +#define SCB_AIRCR_DIT_Msk (1UL << SCB_AIRCR_DIT_Pos) /*!< SCB AIRCR: Data Independent Timing Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_TRD_Pos 20U /*!< SCB CCR: TRD Position */ +#define SCB_CCR_TRD_Msk (1UL << SCB_CCR_TRD_Pos) /*!< SCB CCR: TRD Mask */ + +#define SCB_CCR_LOB_Pos 19U /*!< SCB CCR: LOB Position */ +#define SCB_CCR_LOB_Msk (1UL << SCB_CCR_LOB_Pos) /*!< SCB CCR: LOB Mask */ + +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_PMU_Pos 5U /*!< SCB DFSR: PMU Position */ +#define SCB_DFSR_PMU_Msk (1UL << SCB_DFSR_PMU_Pos) /*!< SCB DFSR: PMU Mask */ + +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CP7_Pos 7U /*!< SCB NSACR: CP7 Position */ +#define SCB_NSACR_CP7_Msk (1UL << SCB_NSACR_CP7_Pos) /*!< SCB NSACR: CP7 Mask */ + +#define SCB_NSACR_CP6_Pos 6U /*!< SCB NSACR: CP6 Position */ +#define SCB_NSACR_CP6_Msk (1UL << SCB_NSACR_CP6_Pos) /*!< SCB NSACR: CP6 Mask */ + +#define SCB_NSACR_CP5_Pos 5U /*!< SCB NSACR: CP5 Position */ +#define SCB_NSACR_CP5_Msk (1UL << SCB_NSACR_CP5_Pos) /*!< SCB NSACR: CP5 Mask */ + +#define SCB_NSACR_CP4_Pos 4U /*!< SCB NSACR: CP4 Position */ +#define SCB_NSACR_CP4_Msk (1UL << SCB_NSACR_CP4_Pos) /*!< SCB NSACR: CP4 Mask */ + +#define SCB_NSACR_CP3_Pos 3U /*!< SCB NSACR: CP3 Position */ +#define SCB_NSACR_CP3_Msk (1UL << SCB_NSACR_CP3_Pos) /*!< SCB NSACR: CP3 Mask */ + +#define SCB_NSACR_CP2_Pos 2U /*!< SCB NSACR: CP2 Position */ +#define SCB_NSACR_CP2_Msk (1UL << SCB_NSACR_CP2_Pos) /*!< SCB NSACR: CP2 Mask */ + +#define SCB_NSACR_CP1_Pos 1U /*!< SCB NSACR: CP1 Position */ +#define SCB_NSACR_CP1_Msk (1UL << SCB_NSACR_CP1_Pos) /*!< SCB NSACR: CP1 Mask */ + +#define SCB_NSACR_CP0_Pos 0U /*!< SCB NSACR: CP0 Position */ +#define SCB_NSACR_CP0_Msk (1UL /*<< SCB_NSACR_CP0_Pos*/) /*!< SCB NSACR: CP0 Mask */ + +/* SCB Debug Feature Register 0 Definitions */ +#define SCB_ID_DFR_UDE_Pos 28U /*!< SCB ID_DFR: UDE Position */ +#define SCB_ID_DFR_UDE_Msk (0xFUL << SCB_ID_DFR_UDE_Pos) /*!< SCB ID_DFR: UDE Mask */ + +#define SCB_ID_DFR_MProfDbg_Pos 20U /*!< SCB ID_DFR: MProfDbg Position */ +#define SCB_ID_DFR_MProfDbg_Msk (0xFUL << SCB_ID_DFR_MProfDbg_Pos) /*!< SCB ID_DFR: MProfDbg Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB RAS Fault Status Register Definitions */ +#define SCB_RFSR_V_Pos 31U /*!< SCB RFSR: V Position */ +#define SCB_RFSR_V_Msk (1UL << SCB_RFSR_V_Pos) /*!< SCB RFSR: V Mask */ + +#define SCB_RFSR_IS_Pos 16U /*!< SCB RFSR: IS Position */ +#define SCB_RFSR_IS_Msk (0x7FFFUL << SCB_RFSR_IS_Pos) /*!< SCB RFSR: IS Mask */ + +#define SCB_RFSR_UET_Pos 0U /*!< SCB RFSR: UET Position */ +#define SCB_RFSR_UET_Msk (3UL /*<< SCB_RFSR_UET_Pos*/) /*!< SCB RFSR: UET Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ICB Implementation Control Block register (ICB) + \brief Type definitions for the Implementation Control Block Register + @{ + */ + +/** + \brief Structure type to access the Implementation Control Block (ICB). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} ICB_Type; + +/* Auxiliary Control Register Definitions */ +#define ICB_ACTLR_DISCRITAXIRUW_Pos 27U /*!< ACTLR: DISCRITAXIRUW Position */ +#define ICB_ACTLR_DISCRITAXIRUW_Msk (1UL << ICB_ACTLR_DISCRITAXIRUW_Pos) /*!< ACTLR: DISCRITAXIRUW Mask */ + +#define ICB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define ICB_ACTLR_DISCRITAXIRUR_Msk (1UL << ICB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define ICB_ACTLR_EVENTBUSEN_Pos 14U /*!< ACTLR: EVENTBUSEN Position */ +#define ICB_ACTLR_EVENTBUSEN_Msk (1UL << ICB_ACTLR_EVENTBUSEN_Pos) /*!< ACTLR: EVENTBUSEN Mask */ + +#define ICB_ACTLR_EVENTBUSEN_S_Pos 13U /*!< ACTLR: EVENTBUSEN_S Position */ +#define ICB_ACTLR_EVENTBUSEN_S_Msk (1UL << ICB_ACTLR_EVENTBUSEN_S_Pos) /*!< ACTLR: EVENTBUSEN_S Mask */ + +#define ICB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define ICB_ACTLR_DISITMATBFLUSH_Msk (1UL << ICB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define ICB_ACTLR_DISNWAMODE_Pos 11U /*!< ACTLR: DISNWAMODE Position */ +#define ICB_ACTLR_DISNWAMODE_Msk (1UL << ICB_ACTLR_DISNWAMODE_Pos) /*!< ACTLR: DISNWAMODE Mask */ + +#define ICB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define ICB_ACTLR_FPEXCODIS_Msk (1UL << ICB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +/* Interrupt Controller Type Register Definitions */ +#define ICB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define ICB_ICTR_INTLINESNUM_Msk (0xFUL /*<< ICB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_ICB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[3U]; + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) ITM Device Type Register */ + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup MemSysCtl_Type Memory System Control Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Memory System Control Registers (MEMSYSCTL) + @{ + */ + +/** + \brief Structure type to access the Memory System Control Registers (MEMSYSCTL). + */ +typedef struct +{ + __IOM uint32_t MSCR; /*!< Offset: 0x000 (R/W) Memory System Control Register */ + __IOM uint32_t PFCR; /*!< Offset: 0x004 (R/W) Prefetcher Control Register */ + uint32_t RESERVED1[2U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x010 (R/W) ITCM Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x014 (R/W) DTCM Control Register */ + __IOM uint32_t PAHBCR; /*!< Offset: 0x018 (R/W) P-AHB Control Register */ + uint32_t RESERVED2[313U]; + __IOM uint32_t ITGU_CTRL; /*!< Offset: 0x500 (R/W) ITGU Control Register */ + __IOM uint32_t ITGU_CFG; /*!< Offset: 0x504 (R/W) ITGU Configuration Register */ + uint32_t RESERVED3[2U]; + __IOM uint32_t ITGU_LUT[16U]; /*!< Offset: 0x510 (R/W) ITGU Look Up Table Register */ + uint32_t RESERVED4[44U]; + __IOM uint32_t DTGU_CTRL; /*!< Offset: 0x600 (R/W) DTGU Control Registers */ + __IOM uint32_t DTGU_CFG; /*!< Offset: 0x604 (R/W) DTGU Configuration Register */ + uint32_t RESERVED5[2U]; + __IOM uint32_t DTGU_LUT[16U]; /*!< Offset: 0x610 (R/W) DTGU Look Up Table Register */ +} MemSysCtl_Type; + +/* MEMSYSCTL Memory System Control Register (MSCR) Register Definitions */ +#define MEMSYSCTL_MSCR_CPWRDN_Pos 17U /*!< MEMSYSCTL MSCR: CPWRDN Position */ +#define MEMSYSCTL_MSCR_CPWRDN_Msk (0x1UL << MEMSYSCTL_MSCR_CPWRDN_Pos) /*!< MEMSYSCTL MSCR: CPWRDN Mask */ + +#define MEMSYSCTL_MSCR_DCCLEAN_Pos 16U /*!< MEMSYSCTL MSCR: DCCLEAN Position */ +#define MEMSYSCTL_MSCR_DCCLEAN_Msk (0x1UL << MEMSYSCTL_MSCR_DCCLEAN_Pos) /*!< MEMSYSCTL MSCR: DCCLEAN Mask */ + +#define MEMSYSCTL_MSCR_ICACTIVE_Pos 13U /*!< MEMSYSCTL MSCR: ICACTIVE Position */ +#define MEMSYSCTL_MSCR_ICACTIVE_Msk (0x1UL << MEMSYSCTL_MSCR_ICACTIVE_Pos) /*!< MEMSYSCTL MSCR: ICACTIVE Mask */ + +#define MEMSYSCTL_MSCR_DCACTIVE_Pos 12U /*!< MEMSYSCTL MSCR: DCACTIVE Position */ +#define MEMSYSCTL_MSCR_DCACTIVE_Msk (0x1UL << MEMSYSCTL_MSCR_DCACTIVE_Pos) /*!< MEMSYSCTL MSCR: DCACTIVE Mask */ + +#define MEMSYSCTL_MSCR_EVECCFAULT_Pos 3U /*!< MEMSYSCTL MSCR: EVECCFAULT Position */ +#define MEMSYSCTL_MSCR_EVECCFAULT_Msk (0x1UL << MEMSYSCTL_MSCR_EVECCFAULT_Pos) /*!< MEMSYSCTL MSCR: EVECCFAULT Mask */ + +#define MEMSYSCTL_MSCR_FORCEWT_Pos 2U /*!< MEMSYSCTL MSCR: FORCEWT Position */ +#define MEMSYSCTL_MSCR_FORCEWT_Msk (0x1UL << MEMSYSCTL_MSCR_FORCEWT_Pos) /*!< MEMSYSCTL MSCR: FORCEWT Mask */ + +#define MEMSYSCTL_MSCR_ECCEN_Pos 1U /*!< MEMSYSCTL MSCR: ECCEN Position */ +#define MEMSYSCTL_MSCR_ECCEN_Msk (0x1UL << MEMSYSCTL_MSCR_ECCEN_Pos) /*!< MEMSYSCTL MSCR: ECCEN Mask */ + +/* MEMSYSCTL Prefetcher Control Register (PFCR) Register Definitions */ +#define MEMSYSCTL_PFCR_DIS_NLP_Pos 7U /*!< MEMSYSCTL PFCR: DIS_NLP Position */ +#define MEMSYSCTL_PFCR_DIS_NLP_Msk (0x1UL << MEMSYSCTL_PFCR_DIS_NLP_Pos) /*!< MEMSYSCTL PFCR: DIS_NLP Mask */ + +#define MEMSYSCTL_PFCR_ENABLE_Pos 0U /*!< MEMSYSCTL PFCR: ENABLE Position */ +#define MEMSYSCTL_PFCR_ENABLE_Msk (0x1UL /*<< MEMSYSCTL_PFCR_ENABLE_Pos*/) /*!< MEMSYSCTL PFCR: ENABLE Mask */ + +/* MEMSYSCTL ITCM Control Register (ITCMCR) Register Definitions */ +#define MEMSYSCTL_ITCMCR_SZ_Pos 3U /*!< MEMSYSCTL ITCMCR: SZ Position */ +#define MEMSYSCTL_ITCMCR_SZ_Msk (0xFUL << MEMSYSCTL_ITCMCR_SZ_Pos) /*!< MEMSYSCTL ITCMCR: SZ Mask */ + +#define MEMSYSCTL_ITCMCR_EN_Pos 0U /*!< MEMSYSCTL ITCMCR: EN Position */ +#define MEMSYSCTL_ITCMCR_EN_Msk (0x1UL /*<< MEMSYSCTL_ITCMCR_EN_Pos*/) /*!< MEMSYSCTL ITCMCR: EN Mask */ + +/* MEMSYSCTL DTCM Control Register (DTCMCR) Register Definitions */ +#define MEMSYSCTL_DTCMCR_SZ_Pos 3U /*!< MEMSYSCTL DTCMCR: SZ Position */ +#define MEMSYSCTL_DTCMCR_SZ_Msk (0xFUL << MEMSYSCTL_DTCMCR_SZ_Pos) /*!< MEMSYSCTL DTCMCR: SZ Mask */ + +#define MEMSYSCTL_DTCMCR_EN_Pos 0U /*!< MEMSYSCTL DTCMCR: EN Position */ +#define MEMSYSCTL_DTCMCR_EN_Msk (0x1UL /*<< MEMSYSCTL_DTCMCR_EN_Pos*/) /*!< MEMSYSCTL DTCMCR: EN Mask */ + +/* MEMSYSCTL P-AHB Control Register (PAHBCR) Register Definitions */ +#define MEMSYSCTL_PAHBCR_SZ_Pos 1U /*!< MEMSYSCTL PAHBCR: SZ Position */ +#define MEMSYSCTL_PAHBCR_SZ_Msk (0x7UL << MEMSYSCTL_PAHBCR_SZ_Pos) /*!< MEMSYSCTL PAHBCR: SZ Mask */ + +#define MEMSYSCTL_PAHBCR_EN_Pos 0U /*!< MEMSYSCTL PAHBCR: EN Position */ +#define MEMSYSCTL_PAHBCR_EN_Msk (0x1UL /*<< MEMSYSCTL_PAHBCR_EN_Pos*/) /*!< MEMSYSCTL PAHBCR: EN Mask */ + +/* MEMSYSCTL ITGU Control Register (ITGU_CTRL) Register Definitions */ +#define MEMSYSCTL_ITGU_CTRL_DEREN_Pos 1U /*!< MEMSYSCTL ITGU_CTRL: DEREN Position */ +#define MEMSYSCTL_ITGU_CTRL_DEREN_Msk (0x1UL << MEMSYSCTL_ITGU_CTRL_DEREN_Pos) /*!< MEMSYSCTL ITGU_CTRL: DEREN Mask */ + +#define MEMSYSCTL_ITGU_CTRL_DBFEN_Pos 0U /*!< MEMSYSCTL ITGU_CTRL: DBFEN Position */ +#define MEMSYSCTL_ITGU_CTRL_DBFEN_Msk (0x1UL /*<< MEMSYSCTL_ITGU_CTRL_DBFEN_Pos*/) /*!< MEMSYSCTL ITGU_CTRL: DBFEN Mask */ + +/* MEMSYSCTL ITGU Configuration Register (ITGU_CFG) Register Definitions */ +#define MEMSYSCTL_ITGU_CFG_PRESENT_Pos 31U /*!< MEMSYSCTL ITGU_CFG: PRESENT Position */ +#define MEMSYSCTL_ITGU_CFG_PRESENT_Msk (0x1UL << MEMSYSCTL_ITGU_CFG_PRESENT_Pos) /*!< MEMSYSCTL ITGU_CFG: PRESENT Mask */ + +#define MEMSYSCTL_ITGU_CFG_NUMBLKS_Pos 8U /*!< MEMSYSCTL ITGU_CFG: NUMBLKS Position */ +#define MEMSYSCTL_ITGU_CFG_NUMBLKS_Msk (0xFUL << MEMSYSCTL_ITGU_CFG_NUMBLKS_Pos) /*!< MEMSYSCTL ITGU_CFG: NUMBLKS Mask */ + +#define MEMSYSCTL_ITGU_CFG_BLKSZ_Pos 0U /*!< MEMSYSCTL ITGU_CFG: BLKSZ Position */ +#define MEMSYSCTL_ITGU_CFG_BLKSZ_Msk (0xFUL /*<< MEMSYSCTL_ITGU_CFG_BLKSZ_Pos*/) /*!< MEMSYSCTL ITGU_CFG: BLKSZ Mask */ + +/* MEMSYSCTL DTGU Control Registers (DTGU_CTRL) Register Definitions */ +#define MEMSYSCTL_DTGU_CTRL_DEREN_Pos 1U /*!< MEMSYSCTL DTGU_CTRL: DEREN Position */ +#define MEMSYSCTL_DTGU_CTRL_DEREN_Msk (0x1UL << MEMSYSCTL_DTGU_CTRL_DEREN_Pos) /*!< MEMSYSCTL DTGU_CTRL: DEREN Mask */ + +#define MEMSYSCTL_DTGU_CTRL_DBFEN_Pos 0U /*!< MEMSYSCTL DTGU_CTRL: DBFEN Position */ +#define MEMSYSCTL_DTGU_CTRL_DBFEN_Msk (0x1UL /*<< MEMSYSCTL_DTGU_CTRL_DBFEN_Pos*/) /*!< MEMSYSCTL DTGU_CTRL: DBFEN Mask */ + +/* MEMSYSCTL DTGU Configuration Register (DTGU_CFG) Register Definitions */ +#define MEMSYSCTL_DTGU_CFG_PRESENT_Pos 31U /*!< MEMSYSCTL DTGU_CFG: PRESENT Position */ +#define MEMSYSCTL_DTGU_CFG_PRESENT_Msk (0x1UL << MEMSYSCTL_DTGU_CFG_PRESENT_Pos) /*!< MEMSYSCTL DTGU_CFG: PRESENT Mask */ + +#define MEMSYSCTL_DTGU_CFG_NUMBLKS_Pos 8U /*!< MEMSYSCTL DTGU_CFG: NUMBLKS Position */ +#define MEMSYSCTL_DTGU_CFG_NUMBLKS_Msk (0xFUL << MEMSYSCTL_DTGU_CFG_NUMBLKS_Pos) /*!< MEMSYSCTL DTGU_CFG: NUMBLKS Mask */ + +#define MEMSYSCTL_DTGU_CFG_BLKSZ_Pos 0U /*!< MEMSYSCTL DTGU_CFG: BLKSZ Position */ +#define MEMSYSCTL_DTGU_CFG_BLKSZ_Msk (0xFUL /*<< MEMSYSCTL_DTGU_CFG_BLKSZ_Pos*/) /*!< MEMSYSCTL DTGU_CFG: BLKSZ Mask */ + + +/*@}*/ /* end of group MemSysCtl_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup PwrModCtl_Type Power Mode Control Registers + \brief Type definitions for the Power Mode Control Registers (PWRMODCTL) + @{ + */ + +/** + \brief Structure type to access the Power Mode Control Registers (PWRMODCTL). + */ +typedef struct +{ + __IOM uint32_t CPDLPSTATE; /*!< Offset: 0x000 (R/W) Core Power Domain Low Power State Register */ + __IOM uint32_t DPDLPSTATE; /*!< Offset: 0x004 (R/W) Debug Power Domain Low Power State Register */ +} PwrModCtl_Type; + +/* PWRMODCTL Core Power Domain Low Power State (CPDLPSTATE) Register Definitions */ +#define PWRMODCTL_CPDLPSTATE_RLPSTATE_Pos 8U /*!< PWRMODCTL CPDLPSTATE: RLPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_RLPSTATE_Msk (0x3UL << PWRMODCTL_CPDLPSTATE_RLPSTATE_Pos) /*!< PWRMODCTL CPDLPSTATE: RLPSTATE Mask */ + +#define PWRMODCTL_CPDLPSTATE_ELPSTATE_Pos 4U /*!< PWRMODCTL CPDLPSTATE: ELPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_ELPSTATE_Msk (0x3UL << PWRMODCTL_CPDLPSTATE_ELPSTATE_Pos) /*!< PWRMODCTL CPDLPSTATE: ELPSTATE Mask */ + +#define PWRMODCTL_CPDLPSTATE_CLPSTATE_Pos 0U /*!< PWRMODCTL CPDLPSTATE: CLPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_CLPSTATE_Msk (0x3UL /*<< PWRMODCTL_CPDLPSTATE_CLPSTATE_Pos*/) /*!< PWRMODCTL CPDLPSTATE: CLPSTATE Mask */ + +/* PWRMODCTL Debug Power Domain Low Power State (DPDLPSTATE) Register Definitions */ +#define PWRMODCTL_DPDLPSTATE_DLPSTATE_Pos 0U /*!< PWRMODCTL DPDLPSTATE: DLPSTATE Position */ +#define PWRMODCTL_DPDLPSTATE_DLPSTATE_Msk (0x3UL /*<< PWRMODCTL_DPDLPSTATE_DLPSTATE_Pos*/) /*!< PWRMODCTL DPDLPSTATE: DLPSTATE Mask */ + +/*@}*/ /* end of group PwrModCtl_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup EWIC_Type External Wakeup Interrupt Controller Registers + \brief Type definitions for the External Wakeup Interrupt Controller Registers (EWIC) + @{ + */ + +/** + \brief Structure type to access the External Wakeup Interrupt Controller Registers (EWIC). + */ +typedef struct +{ + __OM uint32_t EVENTSPR; /*!< Offset: 0x000 ( /W) Event Set Pending Register */ + uint32_t RESERVED0[31U]; + __IM uint32_t EVENTMASKA; /*!< Offset: 0x080 (R/W) Event Mask A Register */ + __IM uint32_t EVENTMASK[15]; /*!< Offset: 0x084 (R/W) Event Mask Register */ +} EWIC_Type; + +/* EWIC External Wakeup Interrupt Controller (EVENTSPR) Register Definitions */ +#define EWIC_EVENTSPR_EDBGREQ_Pos 2U /*!< EWIC EVENTSPR: EDBGREQ Position */ +#define EWIC_EVENTSPR_EDBGREQ_Msk (0x1UL << EWIC_EVENTSPR_EDBGREQ_Pos) /*!< EWIC EVENTSPR: EDBGREQ Mask */ + +#define EWIC_EVENTSPR_NMI_Pos 1U /*!< EWIC EVENTSPR: NMI Position */ +#define EWIC_EVENTSPR_NMI_Msk (0x1UL << EWIC_EVENTSPR_NMI_Pos) /*!< EWIC EVENTSPR: NMI Mask */ + +#define EWIC_EVENTSPR_EVENT_Pos 0U /*!< EWIC EVENTSPR: EVENT Position */ +#define EWIC_EVENTSPR_EVENT_Msk (0x1UL /*<< EWIC_EVENTSPR_EVENT_Pos*/) /*!< EWIC EVENTSPR: EVENT Mask */ + +/* EWIC External Wakeup Interrupt Controller (EVENTMASKA) Register Definitions */ +#define EWIC_EVENTMASKA_EDBGREQ_Pos 2U /*!< EWIC EVENTMASKA: EDBGREQ Position */ +#define EWIC_EVENTMASKA_EDBGREQ_Msk (0x1UL << EWIC_EVENTMASKA_EDBGREQ_Pos) /*!< EWIC EVENTMASKA: EDBGREQ Mask */ + +#define EWIC_EVENTMASKA_NMI_Pos 1U /*!< EWIC EVENTMASKA: NMI Position */ +#define EWIC_EVENTMASKA_NMI_Msk (0x1UL << EWIC_EVENTMASKA_NMI_Pos) /*!< EWIC EVENTMASKA: NMI Mask */ + +#define EWIC_EVENTMASKA_EVENT_Pos 0U /*!< EWIC EVENTMASKA: EVENT Position */ +#define EWIC_EVENTMASKA_EVENT_Msk (0x1UL /*<< EWIC_EVENTMASKA_EVENT_Pos*/) /*!< EWIC EVENTMASKA: EVENT Mask */ + +/* EWIC External Wakeup Interrupt Controller (EVENTMASK) Register Definitions */ +#define EWIC_EVENTMASK_IRQ_Pos 0U /*!< EWIC EVENTMASKA: IRQ Position */ +#define EWIC_EVENTMASK_IRQ_Msk (0xFFFFFFFFUL /*<< EWIC_EVENTMASKA_IRQ_Pos*/) /*!< EWIC EVENTMASKA: IRQ Mask */ + +/*@}*/ /* end of group EWIC_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup ErrBnk_Type Error Banking Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Error Banking Registers (ERRBNK) + @{ + */ + +/** + \brief Structure type to access the Error Banking Registers (ERRBNK). + */ +typedef struct +{ + __IOM uint32_t IEBR0; /*!< Offset: 0x000 (R/W) Instruction Cache Error Bank Register 0 */ + __IOM uint32_t IEBR1; /*!< Offset: 0x004 (R/W) Instruction Cache Error Bank Register 1 */ + uint32_t RESERVED0[2U]; + __IOM uint32_t DEBR0; /*!< Offset: 0x010 (R/W) Data Cache Error Bank Register 0 */ + __IOM uint32_t DEBR1; /*!< Offset: 0x014 (R/W) Data Cache Error Bank Register 1 */ + uint32_t RESERVED1[2U]; + __IOM uint32_t TEBR0; /*!< Offset: 0x020 (R/W) TCM Error Bank Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t TEBR1; /*!< Offset: 0x028 (R/W) TCM Error Bank Register 1 */ +} ErrBnk_Type; + +/* ERRBNK Instruction Cache Error Bank Register 0 (IEBR0) Register Definitions */ +#define ERRBNK_IEBR0_SWDEF_Pos 30U /*!< ERRBNK IEBR0: SWDEF Position */ +#define ERRBNK_IEBR0_SWDEF_Msk (0x3UL << ERRBNK_IEBR0_SWDEF_Pos) /*!< ERRBNK IEBR0: SWDEF Mask */ + +#define ERRBNK_IEBR0_BANK_Pos 16U /*!< ERRBNK IEBR0: BANK Position */ +#define ERRBNK_IEBR0_BANK_Msk (0x1UL << ERRBNK_IEBR0_BANK_Pos) /*!< ERRBNK IEBR0: BANK Mask */ + +#define ERRBNK_IEBR0_LOCATION_Pos 2U /*!< ERRBNK IEBR0: LOCATION Position */ +#define ERRBNK_IEBR0_LOCATION_Msk (0x3FFFUL << ERRBNK_IEBR0_LOCATION_Pos) /*!< ERRBNK IEBR0: LOCATION Mask */ + +#define ERRBNK_IEBR0_LOCKED_Pos 1U /*!< ERRBNK IEBR0: LOCKED Position */ +#define ERRBNK_IEBR0_LOCKED_Msk (0x1UL << ERRBNK_IEBR0_LOCKED_Pos) /*!< ERRBNK IEBR0: LOCKED Mask */ + +#define ERRBNK_IEBR0_VALID_Pos 0U /*!< ERRBNK IEBR0: VALID Position */ +#define ERRBNK_IEBR0_VALID_Msk (0x1UL << /*ERRBNK_IEBR0_VALID_Pos*/) /*!< ERRBNK IEBR0: VALID Mask */ + +/* ERRBNK Instruction Cache Error Bank Register 1 (IEBR1) Register Definitions */ +#define ERRBNK_IEBR1_SWDEF_Pos 30U /*!< ERRBNK IEBR1: SWDEF Position */ +#define ERRBNK_IEBR1_SWDEF_Msk (0x3UL << ERRBNK_IEBR1_SWDEF_Pos) /*!< ERRBNK IEBR1: SWDEF Mask */ + +#define ERRBNK_IEBR1_BANK_Pos 16U /*!< ERRBNK IEBR1: BANK Position */ +#define ERRBNK_IEBR1_BANK_Msk (0x1UL << ERRBNK_IEBR1_BANK_Pos) /*!< ERRBNK IEBR1: BANK Mask */ + +#define ERRBNK_IEBR1_LOCATION_Pos 2U /*!< ERRBNK IEBR1: LOCATION Position */ +#define ERRBNK_IEBR1_LOCATION_Msk (0x3FFFUL << ERRBNK_IEBR1_LOCATION_Pos) /*!< ERRBNK IEBR1: LOCATION Mask */ + +#define ERRBNK_IEBR1_LOCKED_Pos 1U /*!< ERRBNK IEBR1: LOCKED Position */ +#define ERRBNK_IEBR1_LOCKED_Msk (0x1UL << ERRBNK_IEBR1_LOCKED_Pos) /*!< ERRBNK IEBR1: LOCKED Mask */ + +#define ERRBNK_IEBR1_VALID_Pos 0U /*!< ERRBNK IEBR1: VALID Position */ +#define ERRBNK_IEBR1_VALID_Msk (0x1UL << /*ERRBNK_IEBR1_VALID_Pos*/) /*!< ERRBNK IEBR1: VALID Mask */ + +/* ERRBNK Data Cache Error Bank Register 0 (DEBR0) Register Definitions */ +#define ERRBNK_DEBR0_SWDEF_Pos 30U /*!< ERRBNK DEBR0: SWDEF Position */ +#define ERRBNK_DEBR0_SWDEF_Msk (0x3UL << ERRBNK_DEBR0_SWDEF_Pos) /*!< ERRBNK DEBR0: SWDEF Mask */ + +#define ERRBNK_DEBR0_TYPE_Pos 17U /*!< ERRBNK DEBR0: TYPE Position */ +#define ERRBNK_DEBR0_TYPE_Msk (0x1UL << ERRBNK_DEBR0_TYPE_Pos) /*!< ERRBNK DEBR0: TYPE Mask */ + +#define ERRBNK_DEBR0_BANK_Pos 16U /*!< ERRBNK DEBR0: BANK Position */ +#define ERRBNK_DEBR0_BANK_Msk (0x1UL << ERRBNK_DEBR0_BANK_Pos) /*!< ERRBNK DEBR0: BANK Mask */ + +#define ERRBNK_DEBR0_LOCATION_Pos 2U /*!< ERRBNK DEBR0: LOCATION Position */ +#define ERRBNK_DEBR0_LOCATION_Msk (0x3FFFUL << ERRBNK_DEBR0_LOCATION_Pos) /*!< ERRBNK DEBR0: LOCATION Mask */ + +#define ERRBNK_DEBR0_LOCKED_Pos 1U /*!< ERRBNK DEBR0: LOCKED Position */ +#define ERRBNK_DEBR0_LOCKED_Msk (0x1UL << ERRBNK_DEBR0_LOCKED_Pos) /*!< ERRBNK DEBR0: LOCKED Mask */ + +#define ERRBNK_DEBR0_VALID_Pos 0U /*!< ERRBNK DEBR0: VALID Position */ +#define ERRBNK_DEBR0_VALID_Msk (0x1UL << /*ERRBNK_DEBR0_VALID_Pos*/) /*!< ERRBNK DEBR0: VALID Mask */ + +/* ERRBNK Data Cache Error Bank Register 1 (DEBR1) Register Definitions */ +#define ERRBNK_DEBR1_SWDEF_Pos 30U /*!< ERRBNK DEBR1: SWDEF Position */ +#define ERRBNK_DEBR1_SWDEF_Msk (0x3UL << ERRBNK_DEBR1_SWDEF_Pos) /*!< ERRBNK DEBR1: SWDEF Mask */ + +#define ERRBNK_DEBR1_TYPE_Pos 17U /*!< ERRBNK DEBR1: TYPE Position */ +#define ERRBNK_DEBR1_TYPE_Msk (0x1UL << ERRBNK_DEBR1_TYPE_Pos) /*!< ERRBNK DEBR1: TYPE Mask */ + +#define ERRBNK_DEBR1_BANK_Pos 16U /*!< ERRBNK DEBR1: BANK Position */ +#define ERRBNK_DEBR1_BANK_Msk (0x1UL << ERRBNK_DEBR1_BANK_Pos) /*!< ERRBNK DEBR1: BANK Mask */ + +#define ERRBNK_DEBR1_LOCATION_Pos 2U /*!< ERRBNK DEBR1: LOCATION Position */ +#define ERRBNK_DEBR1_LOCATION_Msk (0x3FFFUL << ERRBNK_DEBR1_LOCATION_Pos) /*!< ERRBNK DEBR1: LOCATION Mask */ + +#define ERRBNK_DEBR1_LOCKED_Pos 1U /*!< ERRBNK DEBR1: LOCKED Position */ +#define ERRBNK_DEBR1_LOCKED_Msk (0x1UL << ERRBNK_DEBR1_LOCKED_Pos) /*!< ERRBNK DEBR1: LOCKED Mask */ + +#define ERRBNK_DEBR1_VALID_Pos 0U /*!< ERRBNK DEBR1: VALID Position */ +#define ERRBNK_DEBR1_VALID_Msk (0x1UL << /*ERRBNK_DEBR1_VALID_Pos*/) /*!< ERRBNK DEBR1: VALID Mask */ + +/* ERRBNK TCM Error Bank Register 0 (TEBR0) Register Definitions */ +#define ERRBNK_TEBR0_SWDEF_Pos 30U /*!< ERRBNK TEBR0: SWDEF Position */ +#define ERRBNK_TEBR0_SWDEF_Msk (0x3UL << ERRBNK_TEBR0_SWDEF_Pos) /*!< ERRBNK TEBR0: SWDEF Mask */ + +#define ERRBNK_TEBR0_POISON_Pos 28U /*!< ERRBNK TEBR0: POISON Position */ +#define ERRBNK_TEBR0_POISON_Msk (0x1UL << ERRBNK_TEBR0_POISON_Pos) /*!< ERRBNK TEBR0: POISON Mask */ + +#define ERRBNK_TEBR0_TYPE_Pos 27U /*!< ERRBNK TEBR0: TYPE Position */ +#define ERRBNK_TEBR0_TYPE_Msk (0x1UL << ERRBNK_TEBR0_TYPE_Pos) /*!< ERRBNK TEBR0: TYPE Mask */ + +#define ERRBNK_TEBR0_BANK_Pos 24U /*!< ERRBNK TEBR0: BANK Position */ +#define ERRBNK_TEBR0_BANK_Msk (0x3UL << ERRBNK_TEBR0_BANK_Pos) /*!< ERRBNK TEBR0: BANK Mask */ + +#define ERRBNK_TEBR0_LOCATION_Pos 2U /*!< ERRBNK TEBR0: LOCATION Position */ +#define ERRBNK_TEBR0_LOCATION_Msk (0x3FFFFFUL << ERRBNK_TEBR0_LOCATION_Pos) /*!< ERRBNK TEBR0: LOCATION Mask */ + +#define ERRBNK_TEBR0_LOCKED_Pos 1U /*!< ERRBNK TEBR0: LOCKED Position */ +#define ERRBNK_TEBR0_LOCKED_Msk (0x1UL << ERRBNK_TEBR0_LOCKED_Pos) /*!< ERRBNK TEBR0: LOCKED Mask */ + +#define ERRBNK_TEBR0_VALID_Pos 0U /*!< ERRBNK TEBR0: VALID Position */ +#define ERRBNK_TEBR0_VALID_Msk (0x1UL << /*ERRBNK_TEBR0_VALID_Pos*/) /*!< ERRBNK TEBR0: VALID Mask */ + +/* ERRBNK TCM Error Bank Register 1 (TEBR1) Register Definitions */ +#define ERRBNK_TEBR1_SWDEF_Pos 30U /*!< ERRBNK TEBR1: SWDEF Position */ +#define ERRBNK_TEBR1_SWDEF_Msk (0x3UL << ERRBNK_TEBR1_SWDEF_Pos) /*!< ERRBNK TEBR1: SWDEF Mask */ + +#define ERRBNK_TEBR1_POISON_Pos 28U /*!< ERRBNK TEBR1: POISON Position */ +#define ERRBNK_TEBR1_POISON_Msk (0x1UL << ERRBNK_TEBR1_POISON_Pos) /*!< ERRBNK TEBR1: POISON Mask */ + +#define ERRBNK_TEBR1_TYPE_Pos 27U /*!< ERRBNK TEBR1: TYPE Position */ +#define ERRBNK_TEBR1_TYPE_Msk (0x1UL << ERRBNK_TEBR1_TYPE_Pos) /*!< ERRBNK TEBR1: TYPE Mask */ + +#define ERRBNK_TEBR1_BANK_Pos 24U /*!< ERRBNK TEBR1: BANK Position */ +#define ERRBNK_TEBR1_BANK_Msk (0x3UL << ERRBNK_TEBR1_BANK_Pos) /*!< ERRBNK TEBR1: BANK Mask */ + +#define ERRBNK_TEBR1_LOCATION_Pos 2U /*!< ERRBNK TEBR1: LOCATION Position */ +#define ERRBNK_TEBR1_LOCATION_Msk (0x3FFFFFUL << ERRBNK_TEBR1_LOCATION_Pos) /*!< ERRBNK TEBR1: LOCATION Mask */ + +#define ERRBNK_TEBR1_LOCKED_Pos 1U /*!< ERRBNK TEBR1: LOCKED Position */ +#define ERRBNK_TEBR1_LOCKED_Msk (0x1UL << ERRBNK_TEBR1_LOCKED_Pos) /*!< ERRBNK TEBR1: LOCKED Mask */ + +#define ERRBNK_TEBR1_VALID_Pos 0U /*!< ERRBNK TEBR1: VALID Position */ +#define ERRBNK_TEBR1_VALID_Msk (0x1UL << /*ERRBNK_TEBR1_VALID_Pos*/) /*!< ERRBNK TEBR1: VALID Mask */ + +/*@}*/ /* end of group ErrBnk_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup PrcCfgInf_Type Processor Configuration Information Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Processor Configuration Information Registerss (PRCCFGINF) + @{ + */ + +/** + \brief Structure type to access the Processor Configuration Information Registerss (PRCCFGINF). + */ +typedef struct +{ + __OM uint32_t CFGINFOSEL; /*!< Offset: 0x000 ( /W) Processor Configuration Information Selection Register */ + __IM uint32_t CFGINFORD; /*!< Offset: 0x004 (R/ ) Processor Configuration Information Read Data Register */ +} PrcCfgInf_Type; + +/* PRCCFGINF Processor Configuration Information Selection Register (CFGINFOSEL) Definitions */ + +/* PRCCFGINF Processor Configuration Information Read Data Register (CFGINFORD) Definitions */ + +/*@}*/ /* end of group PrcCfgInf_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFmt_Pos 0U /*!< TPI FFCR: EnFmt Position */ +#define TPI_FFCR_EnFmt_Msk (0x3UL << /*TPI_FFCR_EnFmt_Pos*/) /*!< TPI FFCR: EnFmt Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_PMU Performance Monitoring Unit (PMU) + \brief Type definitions for the Performance Monitoring Unit (PMU) + @{ + */ + +/** + \brief Structure type to access the Performance Monitoring Unit (PMU). + */ +typedef struct +{ + __IOM uint32_t EVCNTR[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x0 (R/W) PMU Event Counter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED0[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCNTR; /*!< Offset: 0x7C (R/W) PMU Cycle Counter Register */ + uint32_t RESERVED1[224]; + __IOM uint32_t EVTYPER[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x400 (R/W) PMU Event Type and Filter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED2[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCFILTR; /*!< Offset: 0x47C (R/W) PMU Cycle Counter Filter Register */ + uint32_t RESERVED3[480]; + __IOM uint32_t CNTENSET; /*!< Offset: 0xC00 (R/W) PMU Count Enable Set Register */ + uint32_t RESERVED4[7]; + __IOM uint32_t CNTENCLR; /*!< Offset: 0xC20 (R/W) PMU Count Enable Clear Register */ + uint32_t RESERVED5[7]; + __IOM uint32_t INTENSET; /*!< Offset: 0xC40 (R/W) PMU Interrupt Enable Set Register */ + uint32_t RESERVED6[7]; + __IOM uint32_t INTENCLR; /*!< Offset: 0xC60 (R/W) PMU Interrupt Enable Clear Register */ + uint32_t RESERVED7[7]; + __IOM uint32_t OVSCLR; /*!< Offset: 0xC80 (R/W) PMU Overflow Flag Status Clear Register */ + uint32_t RESERVED8[7]; + __IOM uint32_t SWINC; /*!< Offset: 0xCA0 (R/W) PMU Software Increment Register */ + uint32_t RESERVED9[7]; + __IOM uint32_t OVSSET; /*!< Offset: 0xCC0 (R/W) PMU Overflow Flag Status Set Register */ + uint32_t RESERVED10[79]; + __IOM uint32_t TYPE; /*!< Offset: 0xE00 (R/W) PMU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0xE04 (R/W) PMU Control Register */ + uint32_t RESERVED11[108]; + __IOM uint32_t AUTHSTATUS; /*!< Offset: 0xFB8 (R/W) PMU Authentication Status Register */ + __IOM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/W) PMU Device Architecture Register */ + uint32_t RESERVED12[3]; + __IOM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/W) PMU Device Type Register */ + __IOM uint32_t PIDR4; /*!< Offset: 0xFD0 (R/W) PMU Peripheral Identification Register 4 */ + uint32_t RESERVED13[3]; + __IOM uint32_t PIDR0; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 0 */ + __IOM uint32_t PIDR1; /*!< Offset: 0xFE4 (R/W) PMU Peripheral Identification Register 1 */ + __IOM uint32_t PIDR2; /*!< Offset: 0xFE8 (R/W) PMU Peripheral Identification Register 2 */ + __IOM uint32_t PIDR3; /*!< Offset: 0xFEC (R/W) PMU Peripheral Identification Register 3 */ + __IOM uint32_t CIDR0; /*!< Offset: 0xFF0 (R/W) PMU Component Identification Register 0 */ + __IOM uint32_t CIDR1; /*!< Offset: 0xFF4 (R/W) PMU Component Identification Register 1 */ + __IOM uint32_t CIDR2; /*!< Offset: 0xFF8 (R/W) PMU Component Identification Register 2 */ + __IOM uint32_t CIDR3; /*!< Offset: 0xFFC (R/W) PMU Component Identification Register 3 */ +} PMU_Type; + +/** \brief PMU Event Counter Registers (0-30) Definitions */ + +#define PMU_EVCNTR_CNT_Pos 0U /*!< PMU EVCNTR: Counter Position */ +#define PMU_EVCNTR_CNT_Msk (0xFFFFUL /*<< PMU_EVCNTRx_CNT_Pos*/) /*!< PMU EVCNTR: Counter Mask */ + +/** \brief PMU Event Type and Filter Registers (0-30) Definitions */ + +#define PMU_EVTYPER_EVENTTOCNT_Pos 0U /*!< PMU EVTYPER: Event to Count Position */ +#define PMU_EVTYPER_EVENTTOCNT_Msk (0xFFFFUL /*<< EVTYPERx_EVENTTOCNT_Pos*/) /*!< PMU EVTYPER: Event to Count Mask */ + +/** \brief PMU Count Enable Set Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENSET: Event Counter 0 Enable Set Position */ +#define PMU_CNTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENSET_CNT0_ENABLE_Pos*/) /*!< PMU CNTENSET: Event Counter 0 Enable Set Mask */ + +#define PMU_CNTENSET_CNT1_ENABLE_Pos 1U /*!< PMU CNTENSET: Event Counter 1 Enable Set Position */ +#define PMU_CNTENSET_CNT1_ENABLE_Msk (1UL << PMU_CNTENSET_CNT1_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 1 Enable Set Mask */ + +#define PMU_CNTENSET_CNT2_ENABLE_Pos 2U /*!< PMU CNTENSET: Event Counter 2 Enable Set Position */ +#define PMU_CNTENSET_CNT2_ENABLE_Msk (1UL << PMU_CNTENSET_CNT2_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 2 Enable Set Mask */ + +#define PMU_CNTENSET_CNT3_ENABLE_Pos 3U /*!< PMU CNTENSET: Event Counter 3 Enable Set Position */ +#define PMU_CNTENSET_CNT3_ENABLE_Msk (1UL << PMU_CNTENSET_CNT3_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 3 Enable Set Mask */ + +#define PMU_CNTENSET_CNT4_ENABLE_Pos 4U /*!< PMU CNTENSET: Event Counter 4 Enable Set Position */ +#define PMU_CNTENSET_CNT4_ENABLE_Msk (1UL << PMU_CNTENSET_CNT4_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 4 Enable Set Mask */ + +#define PMU_CNTENSET_CNT5_ENABLE_Pos 5U /*!< PMU CNTENSET: Event Counter 5 Enable Set Position */ +#define PMU_CNTENSET_CNT5_ENABLE_Msk (1UL << PMU_CNTENSET_CNT5_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 5 Enable Set Mask */ + +#define PMU_CNTENSET_CNT6_ENABLE_Pos 6U /*!< PMU CNTENSET: Event Counter 6 Enable Set Position */ +#define PMU_CNTENSET_CNT6_ENABLE_Msk (1UL << PMU_CNTENSET_CNT6_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 6 Enable Set Mask */ + +#define PMU_CNTENSET_CNT7_ENABLE_Pos 7U /*!< PMU CNTENSET: Event Counter 7 Enable Set Position */ +#define PMU_CNTENSET_CNT7_ENABLE_Msk (1UL << PMU_CNTENSET_CNT7_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 7 Enable Set Mask */ + +#define PMU_CNTENSET_CNT8_ENABLE_Pos 8U /*!< PMU CNTENSET: Event Counter 8 Enable Set Position */ +#define PMU_CNTENSET_CNT8_ENABLE_Msk (1UL << PMU_CNTENSET_CNT8_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 8 Enable Set Mask */ + +#define PMU_CNTENSET_CNT9_ENABLE_Pos 9U /*!< PMU CNTENSET: Event Counter 9 Enable Set Position */ +#define PMU_CNTENSET_CNT9_ENABLE_Msk (1UL << PMU_CNTENSET_CNT9_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 9 Enable Set Mask */ + +#define PMU_CNTENSET_CNT10_ENABLE_Pos 10U /*!< PMU CNTENSET: Event Counter 10 Enable Set Position */ +#define PMU_CNTENSET_CNT10_ENABLE_Msk (1UL << PMU_CNTENSET_CNT10_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 10 Enable Set Mask */ + +#define PMU_CNTENSET_CNT11_ENABLE_Pos 11U /*!< PMU CNTENSET: Event Counter 11 Enable Set Position */ +#define PMU_CNTENSET_CNT11_ENABLE_Msk (1UL << PMU_CNTENSET_CNT11_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 11 Enable Set Mask */ + +#define PMU_CNTENSET_CNT12_ENABLE_Pos 12U /*!< PMU CNTENSET: Event Counter 12 Enable Set Position */ +#define PMU_CNTENSET_CNT12_ENABLE_Msk (1UL << PMU_CNTENSET_CNT12_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 12 Enable Set Mask */ + +#define PMU_CNTENSET_CNT13_ENABLE_Pos 13U /*!< PMU CNTENSET: Event Counter 13 Enable Set Position */ +#define PMU_CNTENSET_CNT13_ENABLE_Msk (1UL << PMU_CNTENSET_CNT13_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 13 Enable Set Mask */ + +#define PMU_CNTENSET_CNT14_ENABLE_Pos 14U /*!< PMU CNTENSET: Event Counter 14 Enable Set Position */ +#define PMU_CNTENSET_CNT14_ENABLE_Msk (1UL << PMU_CNTENSET_CNT14_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 14 Enable Set Mask */ + +#define PMU_CNTENSET_CNT15_ENABLE_Pos 15U /*!< PMU CNTENSET: Event Counter 15 Enable Set Position */ +#define PMU_CNTENSET_CNT15_ENABLE_Msk (1UL << PMU_CNTENSET_CNT15_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 15 Enable Set Mask */ + +#define PMU_CNTENSET_CNT16_ENABLE_Pos 16U /*!< PMU CNTENSET: Event Counter 16 Enable Set Position */ +#define PMU_CNTENSET_CNT16_ENABLE_Msk (1UL << PMU_CNTENSET_CNT16_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 16 Enable Set Mask */ + +#define PMU_CNTENSET_CNT17_ENABLE_Pos 17U /*!< PMU CNTENSET: Event Counter 17 Enable Set Position */ +#define PMU_CNTENSET_CNT17_ENABLE_Msk (1UL << PMU_CNTENSET_CNT17_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 17 Enable Set Mask */ + +#define PMU_CNTENSET_CNT18_ENABLE_Pos 18U /*!< PMU CNTENSET: Event Counter 18 Enable Set Position */ +#define PMU_CNTENSET_CNT18_ENABLE_Msk (1UL << PMU_CNTENSET_CNT18_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 18 Enable Set Mask */ + +#define PMU_CNTENSET_CNT19_ENABLE_Pos 19U /*!< PMU CNTENSET: Event Counter 19 Enable Set Position */ +#define PMU_CNTENSET_CNT19_ENABLE_Msk (1UL << PMU_CNTENSET_CNT19_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 19 Enable Set Mask */ + +#define PMU_CNTENSET_CNT20_ENABLE_Pos 20U /*!< PMU CNTENSET: Event Counter 20 Enable Set Position */ +#define PMU_CNTENSET_CNT20_ENABLE_Msk (1UL << PMU_CNTENSET_CNT20_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 20 Enable Set Mask */ + +#define PMU_CNTENSET_CNT21_ENABLE_Pos 21U /*!< PMU CNTENSET: Event Counter 21 Enable Set Position */ +#define PMU_CNTENSET_CNT21_ENABLE_Msk (1UL << PMU_CNTENSET_CNT21_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 21 Enable Set Mask */ + +#define PMU_CNTENSET_CNT22_ENABLE_Pos 22U /*!< PMU CNTENSET: Event Counter 22 Enable Set Position */ +#define PMU_CNTENSET_CNT22_ENABLE_Msk (1UL << PMU_CNTENSET_CNT22_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 22 Enable Set Mask */ + +#define PMU_CNTENSET_CNT23_ENABLE_Pos 23U /*!< PMU CNTENSET: Event Counter 23 Enable Set Position */ +#define PMU_CNTENSET_CNT23_ENABLE_Msk (1UL << PMU_CNTENSET_CNT23_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 23 Enable Set Mask */ + +#define PMU_CNTENSET_CNT24_ENABLE_Pos 24U /*!< PMU CNTENSET: Event Counter 24 Enable Set Position */ +#define PMU_CNTENSET_CNT24_ENABLE_Msk (1UL << PMU_CNTENSET_CNT24_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 24 Enable Set Mask */ + +#define PMU_CNTENSET_CNT25_ENABLE_Pos 25U /*!< PMU CNTENSET: Event Counter 25 Enable Set Position */ +#define PMU_CNTENSET_CNT25_ENABLE_Msk (1UL << PMU_CNTENSET_CNT25_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 25 Enable Set Mask */ + +#define PMU_CNTENSET_CNT26_ENABLE_Pos 26U /*!< PMU CNTENSET: Event Counter 26 Enable Set Position */ +#define PMU_CNTENSET_CNT26_ENABLE_Msk (1UL << PMU_CNTENSET_CNT26_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 26 Enable Set Mask */ + +#define PMU_CNTENSET_CNT27_ENABLE_Pos 27U /*!< PMU CNTENSET: Event Counter 27 Enable Set Position */ +#define PMU_CNTENSET_CNT27_ENABLE_Msk (1UL << PMU_CNTENSET_CNT27_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 27 Enable Set Mask */ + +#define PMU_CNTENSET_CNT28_ENABLE_Pos 28U /*!< PMU CNTENSET: Event Counter 28 Enable Set Position */ +#define PMU_CNTENSET_CNT28_ENABLE_Msk (1UL << PMU_CNTENSET_CNT28_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 28 Enable Set Mask */ + +#define PMU_CNTENSET_CNT29_ENABLE_Pos 29U /*!< PMU CNTENSET: Event Counter 29 Enable Set Position */ +#define PMU_CNTENSET_CNT29_ENABLE_Msk (1UL << PMU_CNTENSET_CNT29_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 29 Enable Set Mask */ + +#define PMU_CNTENSET_CNT30_ENABLE_Pos 30U /*!< PMU CNTENSET: Event Counter 30 Enable Set Position */ +#define PMU_CNTENSET_CNT30_ENABLE_Msk (1UL << PMU_CNTENSET_CNT30_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 30 Enable Set Mask */ + +#define PMU_CNTENSET_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENSET: Cycle Counter Enable Set Position */ +#define PMU_CNTENSET_CCNTR_ENABLE_Msk (1UL << PMU_CNTENSET_CCNTR_ENABLE_Pos) /*!< PMU CNTENSET: Cycle Counter Enable Set Mask */ + +/** \brief PMU Count Enable Clear Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Position */ +#define PMU_CNTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU CNTENCLR: Event Counter 1 Enable Clear Position */ +#define PMU_CNTENCLR_CNT1_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT1_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 1 Enable Clear */ + +#define PMU_CNTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Position */ +#define PMU_CNTENCLR_CNT2_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT2_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Position */ +#define PMU_CNTENCLR_CNT3_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT3_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Position */ +#define PMU_CNTENCLR_CNT4_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT4_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Position */ +#define PMU_CNTENCLR_CNT5_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT5_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Position */ +#define PMU_CNTENCLR_CNT6_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT6_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Position */ +#define PMU_CNTENCLR_CNT7_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT7_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Position */ +#define PMU_CNTENCLR_CNT8_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT8_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Position */ +#define PMU_CNTENCLR_CNT9_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT9_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Position */ +#define PMU_CNTENCLR_CNT10_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT10_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Position */ +#define PMU_CNTENCLR_CNT11_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT11_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Position */ +#define PMU_CNTENCLR_CNT12_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT12_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Position */ +#define PMU_CNTENCLR_CNT13_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT13_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Position */ +#define PMU_CNTENCLR_CNT14_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT14_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Position */ +#define PMU_CNTENCLR_CNT15_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT15_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Position */ +#define PMU_CNTENCLR_CNT16_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT16_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Position */ +#define PMU_CNTENCLR_CNT17_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT17_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Position */ +#define PMU_CNTENCLR_CNT18_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT18_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Position */ +#define PMU_CNTENCLR_CNT19_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT19_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Position */ +#define PMU_CNTENCLR_CNT20_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT20_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Position */ +#define PMU_CNTENCLR_CNT21_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT21_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Position */ +#define PMU_CNTENCLR_CNT22_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT22_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Position */ +#define PMU_CNTENCLR_CNT23_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT23_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Position */ +#define PMU_CNTENCLR_CNT24_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT24_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Position */ +#define PMU_CNTENCLR_CNT25_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT25_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Position */ +#define PMU_CNTENCLR_CNT26_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT26_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Position */ +#define PMU_CNTENCLR_CNT27_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT27_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Position */ +#define PMU_CNTENCLR_CNT28_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT28_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Position */ +#define PMU_CNTENCLR_CNT29_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT29_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Position */ +#define PMU_CNTENCLR_CNT30_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT30_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Mask */ + +#define PMU_CNTENCLR_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENCLR: Cycle Counter Enable Clear Position */ +#define PMU_CNTENCLR_CCNTR_ENABLE_Msk (1UL << PMU_CNTENCLR_CCNTR_ENABLE_Pos) /*!< PMU CNTENCLR: Cycle Counter Enable Clear Mask */ + +/** \brief PMU Interrupt Enable Set Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENSET_CNT0_ENABLE_Pos*/) /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT1_ENABLE_Pos 1U /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT1_ENABLE_Msk (1UL << PMU_INTENSET_CNT1_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT2_ENABLE_Pos 2U /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT2_ENABLE_Msk (1UL << PMU_INTENSET_CNT2_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT3_ENABLE_Pos 3U /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT3_ENABLE_Msk (1UL << PMU_INTENSET_CNT3_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT4_ENABLE_Pos 4U /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT4_ENABLE_Msk (1UL << PMU_INTENSET_CNT4_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT5_ENABLE_Pos 5U /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT5_ENABLE_Msk (1UL << PMU_INTENSET_CNT5_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT6_ENABLE_Pos 6U /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT6_ENABLE_Msk (1UL << PMU_INTENSET_CNT6_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT7_ENABLE_Pos 7U /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT7_ENABLE_Msk (1UL << PMU_INTENSET_CNT7_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT8_ENABLE_Pos 8U /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT8_ENABLE_Msk (1UL << PMU_INTENSET_CNT8_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT9_ENABLE_Pos 9U /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT9_ENABLE_Msk (1UL << PMU_INTENSET_CNT9_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT10_ENABLE_Pos 10U /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT10_ENABLE_Msk (1UL << PMU_INTENSET_CNT10_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT11_ENABLE_Pos 11U /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT11_ENABLE_Msk (1UL << PMU_INTENSET_CNT11_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT12_ENABLE_Pos 12U /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT12_ENABLE_Msk (1UL << PMU_INTENSET_CNT12_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT13_ENABLE_Pos 13U /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT13_ENABLE_Msk (1UL << PMU_INTENSET_CNT13_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT14_ENABLE_Pos 14U /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT14_ENABLE_Msk (1UL << PMU_INTENSET_CNT14_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT15_ENABLE_Pos 15U /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT15_ENABLE_Msk (1UL << PMU_INTENSET_CNT15_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT16_ENABLE_Pos 16U /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT16_ENABLE_Msk (1UL << PMU_INTENSET_CNT16_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT17_ENABLE_Pos 17U /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT17_ENABLE_Msk (1UL << PMU_INTENSET_CNT17_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT18_ENABLE_Pos 18U /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT18_ENABLE_Msk (1UL << PMU_INTENSET_CNT18_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT19_ENABLE_Pos 19U /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT19_ENABLE_Msk (1UL << PMU_INTENSET_CNT19_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT20_ENABLE_Pos 20U /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT20_ENABLE_Msk (1UL << PMU_INTENSET_CNT20_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT21_ENABLE_Pos 21U /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT21_ENABLE_Msk (1UL << PMU_INTENSET_CNT21_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT22_ENABLE_Pos 22U /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT22_ENABLE_Msk (1UL << PMU_INTENSET_CNT22_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT23_ENABLE_Pos 23U /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT23_ENABLE_Msk (1UL << PMU_INTENSET_CNT23_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT24_ENABLE_Pos 24U /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT24_ENABLE_Msk (1UL << PMU_INTENSET_CNT24_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT25_ENABLE_Pos 25U /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT25_ENABLE_Msk (1UL << PMU_INTENSET_CNT25_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT26_ENABLE_Pos 26U /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT26_ENABLE_Msk (1UL << PMU_INTENSET_CNT26_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT27_ENABLE_Pos 27U /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT27_ENABLE_Msk (1UL << PMU_INTENSET_CNT27_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT28_ENABLE_Pos 28U /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT28_ENABLE_Msk (1UL << PMU_INTENSET_CNT28_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT29_ENABLE_Pos 29U /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT29_ENABLE_Msk (1UL << PMU_INTENSET_CNT29_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT30_ENABLE_Pos 30U /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT30_ENABLE_Msk (1UL << PMU_INTENSET_CNT30_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Position */ +#define PMU_INTENSET_CCYCNT_ENABLE_Msk (1UL << PMU_INTENSET_CYCCNT_ENABLE_Pos) /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Mask */ + +/** \brief PMU Interrupt Enable Clear Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT1_ENABLE_Msk (1UL << PMU_INTENCLR_CNT1_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear */ + +#define PMU_INTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT2_ENABLE_Msk (1UL << PMU_INTENCLR_CNT2_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT3_ENABLE_Msk (1UL << PMU_INTENCLR_CNT3_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT4_ENABLE_Msk (1UL << PMU_INTENCLR_CNT4_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT5_ENABLE_Msk (1UL << PMU_INTENCLR_CNT5_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT6_ENABLE_Msk (1UL << PMU_INTENCLR_CNT6_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT7_ENABLE_Msk (1UL << PMU_INTENCLR_CNT7_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT8_ENABLE_Msk (1UL << PMU_INTENCLR_CNT8_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT9_ENABLE_Msk (1UL << PMU_INTENCLR_CNT9_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT10_ENABLE_Msk (1UL << PMU_INTENCLR_CNT10_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT11_ENABLE_Msk (1UL << PMU_INTENCLR_CNT11_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT12_ENABLE_Msk (1UL << PMU_INTENCLR_CNT12_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT13_ENABLE_Msk (1UL << PMU_INTENCLR_CNT13_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT14_ENABLE_Msk (1UL << PMU_INTENCLR_CNT14_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT15_ENABLE_Msk (1UL << PMU_INTENCLR_CNT15_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT16_ENABLE_Msk (1UL << PMU_INTENCLR_CNT16_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT17_ENABLE_Msk (1UL << PMU_INTENCLR_CNT17_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT18_ENABLE_Msk (1UL << PMU_INTENCLR_CNT18_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT19_ENABLE_Msk (1UL << PMU_INTENCLR_CNT19_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT20_ENABLE_Msk (1UL << PMU_INTENCLR_CNT20_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT21_ENABLE_Msk (1UL << PMU_INTENCLR_CNT21_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT22_ENABLE_Msk (1UL << PMU_INTENCLR_CNT22_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT23_ENABLE_Msk (1UL << PMU_INTENCLR_CNT23_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT24_ENABLE_Msk (1UL << PMU_INTENCLR_CNT24_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT25_ENABLE_Msk (1UL << PMU_INTENCLR_CNT25_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT26_ENABLE_Msk (1UL << PMU_INTENCLR_CNT26_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT27_ENABLE_Msk (1UL << PMU_INTENCLR_CNT27_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT28_ENABLE_Msk (1UL << PMU_INTENCLR_CNT28_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT29_ENABLE_Msk (1UL << PMU_INTENCLR_CNT29_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT30_ENABLE_Msk (1UL << PMU_INTENCLR_CNT30_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CYCCNT_ENABLE_Msk (1UL << PMU_INTENCLR_CYCCNT_ENABLE_Pos) /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Mask */ + +/** \brief PMU Overflow Flag Status Set Register Definitions */ + +#define PMU_OVSSET_CNT0_STATUS_Pos 0U /*!< PMU OVSSET: Event Counter 0 Overflow Set Position */ +#define PMU_OVSSET_CNT0_STATUS_Msk (1UL /*<< PMU_OVSSET_CNT0_STATUS_Pos*/) /*!< PMU OVSSET: Event Counter 0 Overflow Set Mask */ + +#define PMU_OVSSET_CNT1_STATUS_Pos 1U /*!< PMU OVSSET: Event Counter 1 Overflow Set Position */ +#define PMU_OVSSET_CNT1_STATUS_Msk (1UL << PMU_OVSSET_CNT1_STATUS_Pos) /*!< PMU OVSSET: Event Counter 1 Overflow Set Mask */ + +#define PMU_OVSSET_CNT2_STATUS_Pos 2U /*!< PMU OVSSET: Event Counter 2 Overflow Set Position */ +#define PMU_OVSSET_CNT2_STATUS_Msk (1UL << PMU_OVSSET_CNT2_STATUS_Pos) /*!< PMU OVSSET: Event Counter 2 Overflow Set Mask */ + +#define PMU_OVSSET_CNT3_STATUS_Pos 3U /*!< PMU OVSSET: Event Counter 3 Overflow Set Position */ +#define PMU_OVSSET_CNT3_STATUS_Msk (1UL << PMU_OVSSET_CNT3_STATUS_Pos) /*!< PMU OVSSET: Event Counter 3 Overflow Set Mask */ + +#define PMU_OVSSET_CNT4_STATUS_Pos 4U /*!< PMU OVSSET: Event Counter 4 Overflow Set Position */ +#define PMU_OVSSET_CNT4_STATUS_Msk (1UL << PMU_OVSSET_CNT4_STATUS_Pos) /*!< PMU OVSSET: Event Counter 4 Overflow Set Mask */ + +#define PMU_OVSSET_CNT5_STATUS_Pos 5U /*!< PMU OVSSET: Event Counter 5 Overflow Set Position */ +#define PMU_OVSSET_CNT5_STATUS_Msk (1UL << PMU_OVSSET_CNT5_STATUS_Pos) /*!< PMU OVSSET: Event Counter 5 Overflow Set Mask */ + +#define PMU_OVSSET_CNT6_STATUS_Pos 6U /*!< PMU OVSSET: Event Counter 6 Overflow Set Position */ +#define PMU_OVSSET_CNT6_STATUS_Msk (1UL << PMU_OVSSET_CNT6_STATUS_Pos) /*!< PMU OVSSET: Event Counter 6 Overflow Set Mask */ + +#define PMU_OVSSET_CNT7_STATUS_Pos 7U /*!< PMU OVSSET: Event Counter 7 Overflow Set Position */ +#define PMU_OVSSET_CNT7_STATUS_Msk (1UL << PMU_OVSSET_CNT7_STATUS_Pos) /*!< PMU OVSSET: Event Counter 7 Overflow Set Mask */ + +#define PMU_OVSSET_CNT8_STATUS_Pos 8U /*!< PMU OVSSET: Event Counter 8 Overflow Set Position */ +#define PMU_OVSSET_CNT8_STATUS_Msk (1UL << PMU_OVSSET_CNT8_STATUS_Pos) /*!< PMU OVSSET: Event Counter 8 Overflow Set Mask */ + +#define PMU_OVSSET_CNT9_STATUS_Pos 9U /*!< PMU OVSSET: Event Counter 9 Overflow Set Position */ +#define PMU_OVSSET_CNT9_STATUS_Msk (1UL << PMU_OVSSET_CNT9_STATUS_Pos) /*!< PMU OVSSET: Event Counter 9 Overflow Set Mask */ + +#define PMU_OVSSET_CNT10_STATUS_Pos 10U /*!< PMU OVSSET: Event Counter 10 Overflow Set Position */ +#define PMU_OVSSET_CNT10_STATUS_Msk (1UL << PMU_OVSSET_CNT10_STATUS_Pos) /*!< PMU OVSSET: Event Counter 10 Overflow Set Mask */ + +#define PMU_OVSSET_CNT11_STATUS_Pos 11U /*!< PMU OVSSET: Event Counter 11 Overflow Set Position */ +#define PMU_OVSSET_CNT11_STATUS_Msk (1UL << PMU_OVSSET_CNT11_STATUS_Pos) /*!< PMU OVSSET: Event Counter 11 Overflow Set Mask */ + +#define PMU_OVSSET_CNT12_STATUS_Pos 12U /*!< PMU OVSSET: Event Counter 12 Overflow Set Position */ +#define PMU_OVSSET_CNT12_STATUS_Msk (1UL << PMU_OVSSET_CNT12_STATUS_Pos) /*!< PMU OVSSET: Event Counter 12 Overflow Set Mask */ + +#define PMU_OVSSET_CNT13_STATUS_Pos 13U /*!< PMU OVSSET: Event Counter 13 Overflow Set Position */ +#define PMU_OVSSET_CNT13_STATUS_Msk (1UL << PMU_OVSSET_CNT13_STATUS_Pos) /*!< PMU OVSSET: Event Counter 13 Overflow Set Mask */ + +#define PMU_OVSSET_CNT14_STATUS_Pos 14U /*!< PMU OVSSET: Event Counter 14 Overflow Set Position */ +#define PMU_OVSSET_CNT14_STATUS_Msk (1UL << PMU_OVSSET_CNT14_STATUS_Pos) /*!< PMU OVSSET: Event Counter 14 Overflow Set Mask */ + +#define PMU_OVSSET_CNT15_STATUS_Pos 15U /*!< PMU OVSSET: Event Counter 15 Overflow Set Position */ +#define PMU_OVSSET_CNT15_STATUS_Msk (1UL << PMU_OVSSET_CNT15_STATUS_Pos) /*!< PMU OVSSET: Event Counter 15 Overflow Set Mask */ + +#define PMU_OVSSET_CNT16_STATUS_Pos 16U /*!< PMU OVSSET: Event Counter 16 Overflow Set Position */ +#define PMU_OVSSET_CNT16_STATUS_Msk (1UL << PMU_OVSSET_CNT16_STATUS_Pos) /*!< PMU OVSSET: Event Counter 16 Overflow Set Mask */ + +#define PMU_OVSSET_CNT17_STATUS_Pos 17U /*!< PMU OVSSET: Event Counter 17 Overflow Set Position */ +#define PMU_OVSSET_CNT17_STATUS_Msk (1UL << PMU_OVSSET_CNT17_STATUS_Pos) /*!< PMU OVSSET: Event Counter 17 Overflow Set Mask */ + +#define PMU_OVSSET_CNT18_STATUS_Pos 18U /*!< PMU OVSSET: Event Counter 18 Overflow Set Position */ +#define PMU_OVSSET_CNT18_STATUS_Msk (1UL << PMU_OVSSET_CNT18_STATUS_Pos) /*!< PMU OVSSET: Event Counter 18 Overflow Set Mask */ + +#define PMU_OVSSET_CNT19_STATUS_Pos 19U /*!< PMU OVSSET: Event Counter 19 Overflow Set Position */ +#define PMU_OVSSET_CNT19_STATUS_Msk (1UL << PMU_OVSSET_CNT19_STATUS_Pos) /*!< PMU OVSSET: Event Counter 19 Overflow Set Mask */ + +#define PMU_OVSSET_CNT20_STATUS_Pos 20U /*!< PMU OVSSET: Event Counter 20 Overflow Set Position */ +#define PMU_OVSSET_CNT20_STATUS_Msk (1UL << PMU_OVSSET_CNT20_STATUS_Pos) /*!< PMU OVSSET: Event Counter 20 Overflow Set Mask */ + +#define PMU_OVSSET_CNT21_STATUS_Pos 21U /*!< PMU OVSSET: Event Counter 21 Overflow Set Position */ +#define PMU_OVSSET_CNT21_STATUS_Msk (1UL << PMU_OVSSET_CNT21_STATUS_Pos) /*!< PMU OVSSET: Event Counter 21 Overflow Set Mask */ + +#define PMU_OVSSET_CNT22_STATUS_Pos 22U /*!< PMU OVSSET: Event Counter 22 Overflow Set Position */ +#define PMU_OVSSET_CNT22_STATUS_Msk (1UL << PMU_OVSSET_CNT22_STATUS_Pos) /*!< PMU OVSSET: Event Counter 22 Overflow Set Mask */ + +#define PMU_OVSSET_CNT23_STATUS_Pos 23U /*!< PMU OVSSET: Event Counter 23 Overflow Set Position */ +#define PMU_OVSSET_CNT23_STATUS_Msk (1UL << PMU_OVSSET_CNT23_STATUS_Pos) /*!< PMU OVSSET: Event Counter 23 Overflow Set Mask */ + +#define PMU_OVSSET_CNT24_STATUS_Pos 24U /*!< PMU OVSSET: Event Counter 24 Overflow Set Position */ +#define PMU_OVSSET_CNT24_STATUS_Msk (1UL << PMU_OVSSET_CNT24_STATUS_Pos) /*!< PMU OVSSET: Event Counter 24 Overflow Set Mask */ + +#define PMU_OVSSET_CNT25_STATUS_Pos 25U /*!< PMU OVSSET: Event Counter 25 Overflow Set Position */ +#define PMU_OVSSET_CNT25_STATUS_Msk (1UL << PMU_OVSSET_CNT25_STATUS_Pos) /*!< PMU OVSSET: Event Counter 25 Overflow Set Mask */ + +#define PMU_OVSSET_CNT26_STATUS_Pos 26U /*!< PMU OVSSET: Event Counter 26 Overflow Set Position */ +#define PMU_OVSSET_CNT26_STATUS_Msk (1UL << PMU_OVSSET_CNT26_STATUS_Pos) /*!< PMU OVSSET: Event Counter 26 Overflow Set Mask */ + +#define PMU_OVSSET_CNT27_STATUS_Pos 27U /*!< PMU OVSSET: Event Counter 27 Overflow Set Position */ +#define PMU_OVSSET_CNT27_STATUS_Msk (1UL << PMU_OVSSET_CNT27_STATUS_Pos) /*!< PMU OVSSET: Event Counter 27 Overflow Set Mask */ + +#define PMU_OVSSET_CNT28_STATUS_Pos 28U /*!< PMU OVSSET: Event Counter 28 Overflow Set Position */ +#define PMU_OVSSET_CNT28_STATUS_Msk (1UL << PMU_OVSSET_CNT28_STATUS_Pos) /*!< PMU OVSSET: Event Counter 28 Overflow Set Mask */ + +#define PMU_OVSSET_CNT29_STATUS_Pos 29U /*!< PMU OVSSET: Event Counter 29 Overflow Set Position */ +#define PMU_OVSSET_CNT29_STATUS_Msk (1UL << PMU_OVSSET_CNT29_STATUS_Pos) /*!< PMU OVSSET: Event Counter 29 Overflow Set Mask */ + +#define PMU_OVSSET_CNT30_STATUS_Pos 30U /*!< PMU OVSSET: Event Counter 30 Overflow Set Position */ +#define PMU_OVSSET_CNT30_STATUS_Msk (1UL << PMU_OVSSET_CNT30_STATUS_Pos) /*!< PMU OVSSET: Event Counter 30 Overflow Set Mask */ + +#define PMU_OVSSET_CYCCNT_STATUS_Pos 31U /*!< PMU OVSSET: Cycle Counter Overflow Set Position */ +#define PMU_OVSSET_CYCCNT_STATUS_Msk (1UL << PMU_OVSSET_CYCCNT_STATUS_Pos) /*!< PMU OVSSET: Cycle Counter Overflow Set Mask */ + +/** \brief PMU Overflow Flag Status Clear Register Definitions */ + +#define PMU_OVSCLR_CNT0_STATUS_Pos 0U /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Position */ +#define PMU_OVSCLR_CNT0_STATUS_Msk (1UL /*<< PMU_OVSCLR_CNT0_STATUS_Pos*/) /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT1_STATUS_Pos 1U /*!< PMU OVSCLR: Event Counter 1 Overflow Clear Position */ +#define PMU_OVSCLR_CNT1_STATUS_Msk (1UL << PMU_OVSCLR_CNT1_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 1 Overflow Clear */ + +#define PMU_OVSCLR_CNT2_STATUS_Pos 2U /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Position */ +#define PMU_OVSCLR_CNT2_STATUS_Msk (1UL << PMU_OVSCLR_CNT2_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT3_STATUS_Pos 3U /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Position */ +#define PMU_OVSCLR_CNT3_STATUS_Msk (1UL << PMU_OVSCLR_CNT3_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT4_STATUS_Pos 4U /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Position */ +#define PMU_OVSCLR_CNT4_STATUS_Msk (1UL << PMU_OVSCLR_CNT4_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT5_STATUS_Pos 5U /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Position */ +#define PMU_OVSCLR_CNT5_STATUS_Msk (1UL << PMU_OVSCLR_CNT5_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT6_STATUS_Pos 6U /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Position */ +#define PMU_OVSCLR_CNT6_STATUS_Msk (1UL << PMU_OVSCLR_CNT6_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT7_STATUS_Pos 7U /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Position */ +#define PMU_OVSCLR_CNT7_STATUS_Msk (1UL << PMU_OVSCLR_CNT7_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT8_STATUS_Pos 8U /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Position */ +#define PMU_OVSCLR_CNT8_STATUS_Msk (1UL << PMU_OVSCLR_CNT8_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT9_STATUS_Pos 9U /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Position */ +#define PMU_OVSCLR_CNT9_STATUS_Msk (1UL << PMU_OVSCLR_CNT9_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT10_STATUS_Pos 10U /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Position */ +#define PMU_OVSCLR_CNT10_STATUS_Msk (1UL << PMU_OVSCLR_CNT10_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT11_STATUS_Pos 11U /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Position */ +#define PMU_OVSCLR_CNT11_STATUS_Msk (1UL << PMU_OVSCLR_CNT11_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT12_STATUS_Pos 12U /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Position */ +#define PMU_OVSCLR_CNT12_STATUS_Msk (1UL << PMU_OVSCLR_CNT12_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT13_STATUS_Pos 13U /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Position */ +#define PMU_OVSCLR_CNT13_STATUS_Msk (1UL << PMU_OVSCLR_CNT13_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT14_STATUS_Pos 14U /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Position */ +#define PMU_OVSCLR_CNT14_STATUS_Msk (1UL << PMU_OVSCLR_CNT14_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT15_STATUS_Pos 15U /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Position */ +#define PMU_OVSCLR_CNT15_STATUS_Msk (1UL << PMU_OVSCLR_CNT15_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT16_STATUS_Pos 16U /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Position */ +#define PMU_OVSCLR_CNT16_STATUS_Msk (1UL << PMU_OVSCLR_CNT16_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT17_STATUS_Pos 17U /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Position */ +#define PMU_OVSCLR_CNT17_STATUS_Msk (1UL << PMU_OVSCLR_CNT17_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT18_STATUS_Pos 18U /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Position */ +#define PMU_OVSCLR_CNT18_STATUS_Msk (1UL << PMU_OVSCLR_CNT18_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT19_STATUS_Pos 19U /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Position */ +#define PMU_OVSCLR_CNT19_STATUS_Msk (1UL << PMU_OVSCLR_CNT19_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT20_STATUS_Pos 20U /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Position */ +#define PMU_OVSCLR_CNT20_STATUS_Msk (1UL << PMU_OVSCLR_CNT20_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT21_STATUS_Pos 21U /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Position */ +#define PMU_OVSCLR_CNT21_STATUS_Msk (1UL << PMU_OVSCLR_CNT21_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT22_STATUS_Pos 22U /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Position */ +#define PMU_OVSCLR_CNT22_STATUS_Msk (1UL << PMU_OVSCLR_CNT22_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT23_STATUS_Pos 23U /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Position */ +#define PMU_OVSCLR_CNT23_STATUS_Msk (1UL << PMU_OVSCLR_CNT23_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT24_STATUS_Pos 24U /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Position */ +#define PMU_OVSCLR_CNT24_STATUS_Msk (1UL << PMU_OVSCLR_CNT24_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT25_STATUS_Pos 25U /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Position */ +#define PMU_OVSCLR_CNT25_STATUS_Msk (1UL << PMU_OVSCLR_CNT25_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT26_STATUS_Pos 26U /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Position */ +#define PMU_OVSCLR_CNT26_STATUS_Msk (1UL << PMU_OVSCLR_CNT26_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT27_STATUS_Pos 27U /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Position */ +#define PMU_OVSCLR_CNT27_STATUS_Msk (1UL << PMU_OVSCLR_CNT27_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT28_STATUS_Pos 28U /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Position */ +#define PMU_OVSCLR_CNT28_STATUS_Msk (1UL << PMU_OVSCLR_CNT28_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT29_STATUS_Pos 29U /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Position */ +#define PMU_OVSCLR_CNT29_STATUS_Msk (1UL << PMU_OVSCLR_CNT29_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT30_STATUS_Pos 30U /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Position */ +#define PMU_OVSCLR_CNT30_STATUS_Msk (1UL << PMU_OVSCLR_CNT30_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Mask */ + +#define PMU_OVSCLR_CYCCNT_STATUS_Pos 31U /*!< PMU OVSCLR: Cycle Counter Overflow Clear Position */ +#define PMU_OVSCLR_CYCCNT_STATUS_Msk (1UL << PMU_OVSCLR_CYCCNT_STATUS_Pos) /*!< PMU OVSCLR: Cycle Counter Overflow Clear Mask */ + +/** \brief PMU Software Increment Counter */ + +#define PMU_SWINC_CNT0_Pos 0U /*!< PMU SWINC: Event Counter 0 Software Increment Position */ +#define PMU_SWINC_CNT0_Msk (1UL /*<< PMU_SWINC_CNT0_Pos */) /*!< PMU SWINC: Event Counter 0 Software Increment Mask */ + +#define PMU_SWINC_CNT1_Pos 1U /*!< PMU SWINC: Event Counter 1 Software Increment Position */ +#define PMU_SWINC_CNT1_Msk (1UL << PMU_SWINC_CNT1_Pos) /*!< PMU SWINC: Event Counter 1 Software Increment Mask */ + +#define PMU_SWINC_CNT2_Pos 2U /*!< PMU SWINC: Event Counter 2 Software Increment Position */ +#define PMU_SWINC_CNT2_Msk (1UL << PMU_SWINC_CNT2_Pos) /*!< PMU SWINC: Event Counter 2 Software Increment Mask */ + +#define PMU_SWINC_CNT3_Pos 3U /*!< PMU SWINC: Event Counter 3 Software Increment Position */ +#define PMU_SWINC_CNT3_Msk (1UL << PMU_SWINC_CNT3_Pos) /*!< PMU SWINC: Event Counter 3 Software Increment Mask */ + +#define PMU_SWINC_CNT4_Pos 4U /*!< PMU SWINC: Event Counter 4 Software Increment Position */ +#define PMU_SWINC_CNT4_Msk (1UL << PMU_SWINC_CNT4_Pos) /*!< PMU SWINC: Event Counter 4 Software Increment Mask */ + +#define PMU_SWINC_CNT5_Pos 5U /*!< PMU SWINC: Event Counter 5 Software Increment Position */ +#define PMU_SWINC_CNT5_Msk (1UL << PMU_SWINC_CNT5_Pos) /*!< PMU SWINC: Event Counter 5 Software Increment Mask */ + +#define PMU_SWINC_CNT6_Pos 6U /*!< PMU SWINC: Event Counter 6 Software Increment Position */ +#define PMU_SWINC_CNT6_Msk (1UL << PMU_SWINC_CNT6_Pos) /*!< PMU SWINC: Event Counter 6 Software Increment Mask */ + +#define PMU_SWINC_CNT7_Pos 7U /*!< PMU SWINC: Event Counter 7 Software Increment Position */ +#define PMU_SWINC_CNT7_Msk (1UL << PMU_SWINC_CNT7_Pos) /*!< PMU SWINC: Event Counter 7 Software Increment Mask */ + +#define PMU_SWINC_CNT8_Pos 8U /*!< PMU SWINC: Event Counter 8 Software Increment Position */ +#define PMU_SWINC_CNT8_Msk (1UL << PMU_SWINC_CNT8_Pos) /*!< PMU SWINC: Event Counter 8 Software Increment Mask */ + +#define PMU_SWINC_CNT9_Pos 9U /*!< PMU SWINC: Event Counter 9 Software Increment Position */ +#define PMU_SWINC_CNT9_Msk (1UL << PMU_SWINC_CNT9_Pos) /*!< PMU SWINC: Event Counter 9 Software Increment Mask */ + +#define PMU_SWINC_CNT10_Pos 10U /*!< PMU SWINC: Event Counter 10 Software Increment Position */ +#define PMU_SWINC_CNT10_Msk (1UL << PMU_SWINC_CNT10_Pos) /*!< PMU SWINC: Event Counter 10 Software Increment Mask */ + +#define PMU_SWINC_CNT11_Pos 11U /*!< PMU SWINC: Event Counter 11 Software Increment Position */ +#define PMU_SWINC_CNT11_Msk (1UL << PMU_SWINC_CNT11_Pos) /*!< PMU SWINC: Event Counter 11 Software Increment Mask */ + +#define PMU_SWINC_CNT12_Pos 12U /*!< PMU SWINC: Event Counter 12 Software Increment Position */ +#define PMU_SWINC_CNT12_Msk (1UL << PMU_SWINC_CNT12_Pos) /*!< PMU SWINC: Event Counter 12 Software Increment Mask */ + +#define PMU_SWINC_CNT13_Pos 13U /*!< PMU SWINC: Event Counter 13 Software Increment Position */ +#define PMU_SWINC_CNT13_Msk (1UL << PMU_SWINC_CNT13_Pos) /*!< PMU SWINC: Event Counter 13 Software Increment Mask */ + +#define PMU_SWINC_CNT14_Pos 14U /*!< PMU SWINC: Event Counter 14 Software Increment Position */ +#define PMU_SWINC_CNT14_Msk (1UL << PMU_SWINC_CNT14_Pos) /*!< PMU SWINC: Event Counter 14 Software Increment Mask */ + +#define PMU_SWINC_CNT15_Pos 15U /*!< PMU SWINC: Event Counter 15 Software Increment Position */ +#define PMU_SWINC_CNT15_Msk (1UL << PMU_SWINC_CNT15_Pos) /*!< PMU SWINC: Event Counter 15 Software Increment Mask */ + +#define PMU_SWINC_CNT16_Pos 16U /*!< PMU SWINC: Event Counter 16 Software Increment Position */ +#define PMU_SWINC_CNT16_Msk (1UL << PMU_SWINC_CNT16_Pos) /*!< PMU SWINC: Event Counter 16 Software Increment Mask */ + +#define PMU_SWINC_CNT17_Pos 17U /*!< PMU SWINC: Event Counter 17 Software Increment Position */ +#define PMU_SWINC_CNT17_Msk (1UL << PMU_SWINC_CNT17_Pos) /*!< PMU SWINC: Event Counter 17 Software Increment Mask */ + +#define PMU_SWINC_CNT18_Pos 18U /*!< PMU SWINC: Event Counter 18 Software Increment Position */ +#define PMU_SWINC_CNT18_Msk (1UL << PMU_SWINC_CNT18_Pos) /*!< PMU SWINC: Event Counter 18 Software Increment Mask */ + +#define PMU_SWINC_CNT19_Pos 19U /*!< PMU SWINC: Event Counter 19 Software Increment Position */ +#define PMU_SWINC_CNT19_Msk (1UL << PMU_SWINC_CNT19_Pos) /*!< PMU SWINC: Event Counter 19 Software Increment Mask */ + +#define PMU_SWINC_CNT20_Pos 20U /*!< PMU SWINC: Event Counter 20 Software Increment Position */ +#define PMU_SWINC_CNT20_Msk (1UL << PMU_SWINC_CNT20_Pos) /*!< PMU SWINC: Event Counter 20 Software Increment Mask */ + +#define PMU_SWINC_CNT21_Pos 21U /*!< PMU SWINC: Event Counter 21 Software Increment Position */ +#define PMU_SWINC_CNT21_Msk (1UL << PMU_SWINC_CNT21_Pos) /*!< PMU SWINC: Event Counter 21 Software Increment Mask */ + +#define PMU_SWINC_CNT22_Pos 22U /*!< PMU SWINC: Event Counter 22 Software Increment Position */ +#define PMU_SWINC_CNT22_Msk (1UL << PMU_SWINC_CNT22_Pos) /*!< PMU SWINC: Event Counter 22 Software Increment Mask */ + +#define PMU_SWINC_CNT23_Pos 23U /*!< PMU SWINC: Event Counter 23 Software Increment Position */ +#define PMU_SWINC_CNT23_Msk (1UL << PMU_SWINC_CNT23_Pos) /*!< PMU SWINC: Event Counter 23 Software Increment Mask */ + +#define PMU_SWINC_CNT24_Pos 24U /*!< PMU SWINC: Event Counter 24 Software Increment Position */ +#define PMU_SWINC_CNT24_Msk (1UL << PMU_SWINC_CNT24_Pos) /*!< PMU SWINC: Event Counter 24 Software Increment Mask */ + +#define PMU_SWINC_CNT25_Pos 25U /*!< PMU SWINC: Event Counter 25 Software Increment Position */ +#define PMU_SWINC_CNT25_Msk (1UL << PMU_SWINC_CNT25_Pos) /*!< PMU SWINC: Event Counter 25 Software Increment Mask */ + +#define PMU_SWINC_CNT26_Pos 26U /*!< PMU SWINC: Event Counter 26 Software Increment Position */ +#define PMU_SWINC_CNT26_Msk (1UL << PMU_SWINC_CNT26_Pos) /*!< PMU SWINC: Event Counter 26 Software Increment Mask */ + +#define PMU_SWINC_CNT27_Pos 27U /*!< PMU SWINC: Event Counter 27 Software Increment Position */ +#define PMU_SWINC_CNT27_Msk (1UL << PMU_SWINC_CNT27_Pos) /*!< PMU SWINC: Event Counter 27 Software Increment Mask */ + +#define PMU_SWINC_CNT28_Pos 28U /*!< PMU SWINC: Event Counter 28 Software Increment Position */ +#define PMU_SWINC_CNT28_Msk (1UL << PMU_SWINC_CNT28_Pos) /*!< PMU SWINC: Event Counter 28 Software Increment Mask */ + +#define PMU_SWINC_CNT29_Pos 29U /*!< PMU SWINC: Event Counter 29 Software Increment Position */ +#define PMU_SWINC_CNT29_Msk (1UL << PMU_SWINC_CNT29_Pos) /*!< PMU SWINC: Event Counter 29 Software Increment Mask */ + +#define PMU_SWINC_CNT30_Pos 30U /*!< PMU SWINC: Event Counter 30 Software Increment Position */ +#define PMU_SWINC_CNT30_Msk (1UL << PMU_SWINC_CNT30_Pos) /*!< PMU SWINC: Event Counter 30 Software Increment Mask */ + +/** \brief PMU Control Register Definitions */ + +#define PMU_CTRL_ENABLE_Pos 0U /*!< PMU CTRL: ENABLE Position */ +#define PMU_CTRL_ENABLE_Msk (1UL /*<< PMU_CTRL_ENABLE_Pos*/) /*!< PMU CTRL: ENABLE Mask */ + +#define PMU_CTRL_EVENTCNT_RESET_Pos 1U /*!< PMU CTRL: Event Counter Reset Position */ +#define PMU_CTRL_EVENTCNT_RESET_Msk (1UL << PMU_CTRL_EVENTCNT_RESET_Pos) /*!< PMU CTRL: Event Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_RESET_Pos 2U /*!< PMU CTRL: Cycle Counter Reset Position */ +#define PMU_CTRL_CYCCNT_RESET_Msk (1UL << PMU_CTRL_CYCCNT_RESET_Pos) /*!< PMU CTRL: Cycle Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_DISABLE_Pos 5U /*!< PMU CTRL: Disable Cycle Counter Position */ +#define PMU_CTRL_CYCCNT_DISABLE_Msk (1UL << PMU_CTRL_CYCCNT_DISABLE_Pos) /*!< PMU CTRL: Disable Cycle Counter Mask */ + +#define PMU_CTRL_FRZ_ON_OV_Pos 9U /*!< PMU CTRL: Freeze-on-overflow Position */ +#define PMU_CTRL_FRZ_ON_OV_Msk (1UL << PMU_CTRL_FRZ_ON_OVERFLOW_Pos) /*!< PMU CTRL: Freeze-on-overflow Mask */ + +#define PMU_CTRL_TRACE_ON_OV_Pos 11U /*!< PMU CTRL: Trace-on-overflow Position */ +#define PMU_CTRL_TRACE_ON_OV_Msk (1UL << PMU_CTRL_TRACE_ON_OVERFLOW_Pos) /*!< PMU CTRL: Trace-on-overflow Mask */ + +/** \brief PMU Type Register Definitions */ + +#define PMU_TYPE_NUM_CNTS_Pos 0U /*!< PMU TYPE: Number of Counters Position */ +#define PMU_TYPE_NUM_CNTS_Msk (0xFFUL /*<< PMU_TYPE_NUM_CNTS_Pos*/) /*!< PMU TYPE: Number of Counters Mask */ + +#define PMU_TYPE_SIZE_CNTS_Pos 8U /*!< PMU TYPE: Size of Counters Position */ +#define PMU_TYPE_SIZE_CNTS_Msk (0x3FUL << PMU_TYPE_SIZE_CNTS_Pos) /*!< PMU TYPE: Size of Counters Mask */ + +#define PMU_TYPE_CYCCNT_PRESENT_Pos 14U /*!< PMU TYPE: Cycle Counter Present Position */ +#define PMU_TYPE_CYCCNT_PRESENT_Msk (1UL << PMU_TYPE_CYCCNT_PRESENT_Pos) /*!< PMU TYPE: Cycle Counter Present Mask */ + +#define PMU_TYPE_FRZ_OV_SUPPORT_Pos 21U /*!< PMU TYPE: Freeze-on-overflow Support Position */ +#define PMU_TYPE_FRZ_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Freeze-on-overflow Support Mask */ + +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Pos 23U /*!< PMU TYPE: Trace-on-overflow Support Position */ +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Trace-on-overflow Support Mask */ + +/** \brief PMU Authentication Status Register Definitions */ + +#define PMU_AUTHSTATUS_NSID_Pos 0U /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSID_Msk (0x3UL /*<< PMU_AUTHSTATUS_NSID_Pos*/) /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSNID_Pos 2U /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSNID_Msk (0x3UL << PMU_AUTHSTATUS_NSNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SID_Pos 4U /*!< PMU AUTHSTATUS: Secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_SID_Msk (0x3UL << PMU_AUTHSTATUS_SID_Pos) /*!< PMU AUTHSTATUS: Secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SNID_Pos 6U /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SNID_Msk (0x3UL << PMU_AUTHSTATUS_SNID_Pos) /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUID_Pos 16U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUID_Msk (0x3UL << PMU_AUTHSTATUS_NSUID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUNID_Pos 18U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUNID_Msk (0x3UL << PMU_AUTHSTATUS_NSUNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUID_Pos 20U /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_SUID_Msk (0x3UL << PMU_AUTHSTATUS_SUID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUNID_Pos 22U /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SUNID_Msk (0x3UL << PMU_AUTHSTATUS_SUNID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Mask */ + + +/*@} end of group CMSIS_PMU */ +#endif + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +#define FPU_FPDSCR_FZ16_Pos 19U /*!< FPDSCR: FZ16 bit Position */ +#define FPU_FPDSCR_FZ16_Msk (1UL << FPU_FPDSCR_FZ16_Pos) /*!< FPDSCR: FZ16 bit Mask */ + +#define FPU_FPDSCR_LTPSIZE_Pos 16U /*!< FPDSCR: LTPSIZE bit Position */ +#define FPU_FPDSCR_LTPSIZE_Msk (7UL << FPU_FPDSCR_LTPSIZE_Pos) /*!< FPDSCR: LTPSIZE bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FPRound_Pos 28U /*!< MVFR0: FPRound bits Position */ +#define FPU_MVFR0_FPRound_Msk (0xFUL << FPU_MVFR0_FPRound_Pos) /*!< MVFR0: FPRound bits Mask */ + +#define FPU_MVFR0_FPSqrt_Pos 20U /*!< MVFR0: FPSqrt bits Position */ +#define FPU_MVFR0_FPSqrt_Msk (0xFUL << FPU_MVFR0_FPSqrt_Pos) /*!< MVFR0: FPSqrt bits Mask */ + +#define FPU_MVFR0_FPDivide_Pos 16U /*!< MVFR0: FPDivide bits Position */ +#define FPU_MVFR0_FPDivide_Msk (0xFUL << FPU_MVFR0_FPDivide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FPDP_Pos 8U /*!< MVFR0: FPDP bits Position */ +#define FPU_MVFR0_FPDP_Msk (0xFUL << FPU_MVFR0_FPDP_Pos) /*!< MVFR0: FPDP bits Mask */ + +#define FPU_MVFR0_FPSP_Pos 4U /*!< MVFR0: FPSP bits Position */ +#define FPU_MVFR0_FPSP_Msk (0xFUL << FPU_MVFR0_FPSP_Pos) /*!< MVFR0: FPSP bits Mask */ + +#define FPU_MVFR0_SIMDReg_Pos 0U /*!< MVFR0: SIMDReg bits Position */ +#define FPU_MVFR0_SIMDReg_Msk (0xFUL /*<< FPU_MVFR0_SIMDReg_Pos*/) /*!< MVFR0: SIMDReg bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FMAC_Pos 28U /*!< MVFR1: FMAC bits Position */ +#define FPU_MVFR1_FMAC_Msk (0xFUL << FPU_MVFR1_FMAC_Pos) /*!< MVFR1: FMAC bits Mask */ + +#define FPU_MVFR1_FPHP_Pos 24U /*!< MVFR1: FPHP bits Position */ +#define FPU_MVFR1_FPHP_Msk (0xFUL << FPU_MVFR1_FPHP_Pos) /*!< MVFR1: FPHP bits Mask */ + +#define FPU_MVFR1_FP16_Pos 20U /*!< MVFR1: FP16 bits Position */ +#define FPU_MVFR1_FP16_Msk (0xFUL << FPU_MVFR1_FP16_Pos) /*!< MVFR1: FP16 bits Mask */ + +#define FPU_MVFR1_MVE_Pos 8U /*!< MVFR1: MVE bits Position */ +#define FPU_MVFR1_MVE_Msk (0xFUL << FPU_MVFR1_MVE_Pos) /*!< MVFR1: MVE bits Mask */ + +#define FPU_MVFR1_FPDNaN_Pos 4U /*!< MVFR1: FPDNaN bits Position */ +#define FPU_MVFR1_FPDNaN_Msk (0xFUL << FPU_MVFR1_FPDNaN_Pos) /*!< MVFR1: FPDNaN bits Mask */ + +#define FPU_MVFR1_FPFtZ_Pos 0U /*!< MVFR1: FPFtZ bits Position */ +#define FPU_MVFR1_FPFtZ_Msk (0xFUL /*<< FPU_MVFR1_FPFtZ_Pos*/) /*!< MVFR1: FPFtZ bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_FPD_Pos 23U /*!< \deprecated CoreDebug DHCSR: S_FPD Position */ +#define CoreDebug_DHCSR_S_FPD_Msk (1UL << CoreDebug_DHCSR_S_FPD_Pos) /*!< \deprecated CoreDebug DHCSR: S_FPD Mask */ + +#define CoreDebug_DHCSR_S_SUIDE_Pos 22U /*!< \deprecated CoreDebug DHCSR: S_SUIDE Position */ +#define CoreDebug_DHCSR_S_SUIDE_Msk (1UL << CoreDebug_DHCSR_S_SUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SUIDE Mask */ + +#define CoreDebug_DHCSR_S_NSUIDE_Pos 21U /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Position */ +#define CoreDebug_DHCSR_S_NSUIDE_Msk (1UL << CoreDebug_DHCSR_S_NSUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Mask */ + +#define CoreDebug_DHCSR_S_SDE_Pos 20U /*!< \deprecated CoreDebug DHCSR: S_SDE Position */ +#define CoreDebug_DHCSR_S_SDE_Msk (1UL << CoreDebug_DHCSR_S_SDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SDE Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_PMOV_Pos 6U /*!< \deprecated CoreDebug DHCSR: C_PMOV Position */ +#define CoreDebug_DHCSR_C_PMOV_Msk (1UL << CoreDebug_DHCSR_C_PMOV_Pos) /*!< \deprecated CoreDebug DHCSR: C_PMOV Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Set Clear Exception and Monitor Control Register Definitions */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_REQ_Pos 3U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_SET_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_PEND_Pos 1U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_SET_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_UIDEN_Pos 10U /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_UIDAPEN_Pos 9U /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDAPEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDAPEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Mask */ + +#define CoreDebug_DAUTHCTRL_FSDMA_Pos 8U /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Position */ +#define CoreDebug_DAUTHCTRL_FSDMA_Msk (1UL << CoreDebug_DAUTHCTRL_FSDMA_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_FPD_Pos 23U /*!< DCB DHCSR: Floating-point registers Debuggable Position */ +#define DCB_DHCSR_S_FPD_Msk (0x1UL << DCB_DHCSR_S_FPD_Pos) /*!< DCB DHCSR: Floating-point registers Debuggable Mask */ + +#define DCB_DHCSR_S_SUIDE_Pos 22U /*!< DCB DHCSR: Secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_SUIDE_Msk (0x1UL << DCB_DHCSR_S_SUIDE_Pos) /*!< DCB DHCSR: Secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_NSUIDE_Pos 21U /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_NSUIDE_Msk (0x1UL << DCB_DHCSR_S_NSUIDE_Pos) /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_PMOV_Pos 6U /*!< DCB DHCSR: Halt on PMU overflow control Position */ +#define DCB_DHCSR_C_PMOV_Msk (0x1UL << DCB_DHCSR_C_PMOV_Pos) /*!< DCB DHCSR: Halt on PMU overflow control Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DSCEMCR, Debug Set Clear Exception and Monitor Control Register Definitions */ +#define DCB_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< DCB DSCEMCR: Clear monitor request Position */ +#define DCB_DSCEMCR_CLR_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_REQ_Pos) /*!< DCB DSCEMCR: Clear monitor request Mask */ + +#define DCB_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< DCB DSCEMCR: Clear monitor pend Position */ +#define DCB_DSCEMCR_CLR_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_PEND_Pos) /*!< DCB DSCEMCR: Clear monitor pend Mask */ + +#define DCB_DSCEMCR_SET_MON_REQ_Pos 3U /*!< DCB DSCEMCR: Set monitor request Position */ +#define DCB_DSCEMCR_SET_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_SET_MON_REQ_Pos) /*!< DCB DSCEMCR: Set monitor request Mask */ + +#define DCB_DSCEMCR_SET_MON_PEND_Pos 1U /*!< DCB DSCEMCR: Set monitor pend Position */ +#define DCB_DSCEMCR_SET_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_SET_MON_PEND_Pos) /*!< DCB DSCEMCR: Set monitor pend Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_UIDEN_Pos 10U /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Position */ +#define DCB_DAUTHCTRL_UIDEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Mask */ + +#define DCB_DAUTHCTRL_UIDAPEN_Pos 9U /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Position */ +#define DCB_DAUTHCTRL_UIDAPEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDAPEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Mask */ + +#define DCB_DAUTHCTRL_FSDMA_Pos 8U /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Position */ +#define DCB_DAUTHCTRL_FSDMA_Msk (0x1UL << DCB_DAUTHCTRL_FSDMA_Pos) /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Mask */ + +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SUNID_Pos 22U /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUNID_Msk (0x3UL << DIB_DAUTHSTATUS_SUNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SUID_Pos 20U /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUID_Msk (0x3UL << DIB_DAUTHSTATUS_SUID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_NSUNID_Pos 18U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Position */ +#define DIB_DAUTHSTATUS_NSUNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Mask */ + +#define DIB_DAUTHSTATUS_NSUID_Pos 16U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_NSUID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define MEMSYSCTL_BASE (0xE001E000UL) /*!< Memory System Control Base Address */ + #define ERRBNK_BASE (0xE001E100UL) /*!< Error Banking Base Address */ + #define PWRMODCTL_BASE (0xE001E300UL) /*!< Power Mode Control Base Address */ + #define EWIC_BASE (0xE001E400UL) /*!< External Wakeup Interrupt Controller Base Address */ + #define PRCCFGINF_BASE (0xE001E700UL) /*!< Processor Configuration Information Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define ICB ((ICB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define MEMSYSCTL ((MemSysCtl_Type *) MEMSYSCTL_BASE ) /*!< Memory System Control configuration struct */ + #define ERRBNK ((ErrBnk_Type *) ERRBNK_BASE ) /*!< Error Banking configuration struct */ + #define PWRMODCTL ((PwrModCtl_Type *) PWRMODCTL_BASE ) /*!< Power Mode Control configuration struct */ + #define EWIC ((EWIC_Type *) EWIC_BASE ) /*!< EWIC configuration struct */ + #define PRCCFGINF ((PrcCfgInf_Type *) PRCCFGINF_BASE ) /*!< Processor Configuration Information configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + #define PMU_BASE (0xE0003000UL) /*!< PMU Base Address */ + #define PMU ((PMU_Type *) PMU_BASE ) /*!< PMU configuration struct */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define ICB_NS ((ICB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ + +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## PMU functions and events #################################### */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + +#include "pmu_armv8.h" + +/** + \brief Cortex-M85 PMU events + \note Architectural PMU events can be found in pmu_armv8.h +*/ + +#define ARMCM85_PMU_ECC_ERR 0xC000 /*!< One or more Error Correcting Code (ECC) errors detected */ +#define ARMCM85_PMU_ECC_ERR_MBIT 0xC001 /*!< One or more multi-bit ECC errors detected */ +#define ARMCM85_PMU_ECC_ERR_DCACHE 0xC010 /*!< One or more ECC errors in the data cache */ +#define ARMCM85_PMU_ECC_ERR_ICACHE 0xC011 /*!< One or more ECC errors in the instruction cache */ +#define ARMCM85_PMU_ECC_ERR_MBIT_DCACHE 0xC012 /*!< One or more multi-bit ECC errors in the data cache */ +#define ARMCM85_PMU_ECC_ERR_MBIT_ICACHE 0xC013 /*!< One or more multi-bit ECC errors in the instruction cache */ +#define ARMCM85_PMU_ECC_ERR_DTCM 0xC020 /*!< One or more ECC errors in the Data Tightly Coupled Memory (DTCM) */ +#define ARMCM85_PMU_ECC_ERR_ITCM 0xC021 /*!< One or more ECC errors in the Instruction Tightly Coupled Memory (ITCM) */ +#define ARMCM85_PMU_ECC_ERR_MBIT_DTCM 0xC022 /*!< One or more multi-bit ECC errors in the DTCM */ +#define ARMCM85_PMU_ECC_ERR_MBIT_ITCM 0xC023 /*!< One or more multi-bit ECC errors in the ITCM */ +#define ARMCM85_PMU_PF_LINEFILL 0xC100 /*!< The prefetcher starts a line-fill */ +#define ARMCM85_PMU_PF_CANCEL 0xC101 /*!< The prefetcher stops prefetching */ +#define ARMCM85_PMU_PF_DROP_LINEFILL 0xC102 /*!< A linefill triggered by a prefetcher has been dropped because of lack of buffering */ +#define ARMCM85_PMU_NWAMODE_ENTER 0xC200 /*!< No write-allocate mode entry */ +#define ARMCM85_PMU_NWAMODE 0xC201 /*!< Write-allocate store is not allocated into the data cache due to no-write-allocate mode */ +#define ARMCM85_PMU_SAHB_ACCESS 0xC300 /*!< Read or write access on the S-AHB interface to the TCM */ +#define ARMCM85_PMU_PAHB_ACCESS 0xC301 /*!< Read or write access on the P-AHB write interface */ +#define ARMCM85_PMU_AXI_WRITE_ACCESS 0xC302 /*!< Any beat access to M-AXI write interface */ +#define ARMCM85_PMU_AXI_READ_ACCESS 0xC303 /*!< Any beat access to M-AXI read interface */ +#define ARMCM85_PMU_DOSTIMEOUT_DOUBLE 0xC400 /*!< Denial of Service timeout has fired twice and caused buffers to drain to allow forward progress */ +#define ARMCM85_PMU_DOSTIMEOUT_TRIPLE 0xC401 /*!< Denial of Service timeout has fired three times and blocked the LSU to force forward progress */ + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + +/* ########################## MVE functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_MveFunctions MVE Functions + \brief Function that provides MVE type. + @{ + */ + +/** + \brief get MVE type + \details returns the MVE type + \returns + - \b 0: No Vector Extension (MVE) + - \b 1: Integer Vector Extension (MVE-I) + - \b 2: Floating-point Vector Extension (MVE-F) + */ +__STATIC_INLINE uint32_t SCB_GetMVEType(void) +{ + const uint32_t mvfr1 = FPU->MVFR1; + if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x2U << FPU_MVFR1_MVE_Pos)) + { + return 2U; + } + else if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x1U << FPU_MVFR1_MVE_Pos)) + { + return 1U; + } + else + { + return 0U; + } +} + + +/*@} end of CMSIS_Core_MveFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + +/* ################### PAC Key functions ########################### */ + +#if (defined (__ARM_FEATURE_PAUTH) && (__ARM_FEATURE_PAUTH == 1)) +#include "pac_armv81.h" +#endif + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM85_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_sc000.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_sc000.h similarity index 98% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_sc000.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_sc000.h index 9b67c92..dbc755f 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_sc000.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_sc000.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_sc000.h * @brief CMSIS SC000 Core Peripheral Access Layer Header File - * @version V5.0.5 - * @date 28. May 2018 + * @version V5.0.7 + * @date 27. March 2020 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -62,7 +62,7 @@ #include "cmsis_version.h" -/* CMSIS SC000 definitions */ +/* CMSIS SC000 definitions */ #define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ #define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ #define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -142,6 +142,11 @@ #warning "__MPU_PRESENT not defined in device header file; using default!" #endif + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + #ifndef __NVIC_PRIO_BITS #define __NVIC_PRIO_BITS 2U #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" @@ -750,7 +755,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -904,6 +911,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ } diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_sc300.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_sc300.h similarity index 97% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/core_sc300.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_sc300.h index 3e8a471..d666210 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/core_sc300.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_sc300.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_sc300.h * @brief CMSIS SC300 Core Peripheral Access Layer Header File - * @version V5.0.6 - * @date 04. June 2018 + * @version V5.0.10 + * @date 04. June 2021 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -62,7 +62,7 @@ #include "cmsis_version.h" -/* CMSIS SC300 definitions */ +/* CMSIS SC300 definitions */ #define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ #define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ #define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -142,6 +142,11 @@ #warning "__MPU_PRESENT not defined in device header file; using default!" #endif + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + #ifndef __NVIC_PRIO_BITS #define __NVIC_PRIO_BITS 3U #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" @@ -342,7 +347,7 @@ typedef struct __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[24U]; __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; + uint32_t RESERVED1[24U]; __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[24U]; __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -557,19 +562,19 @@ typedef struct #define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ #define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ #define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ #define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ #define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ #define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ /* BusFault Status Register (part of SCB Configurable Fault Status Register) */ @@ -653,13 +658,23 @@ typedef struct { uint32_t RESERVED0[1U]; __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - uint32_t RESERVED1[1U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ } SCnSCB_Type; /* Interrupt Controller Type Register Definitions */ #define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ #define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + /*@} end of group CMSIS_SCnotSCB */ @@ -739,10 +754,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -793,18 +805,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1037,13 +1037,13 @@ typedef struct /* TPI Integration ETM Data Register Definitions (FIFO0) */ #define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ #define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ #define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ #define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ #define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ #define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ @@ -1066,13 +1066,13 @@ typedef struct /* TPI Integration ITM Data Register Definitions (FIFO1) */ #define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ #define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ #define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ #define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ #define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ #define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ @@ -1448,7 +1448,6 @@ typedef struct #define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - /** \brief Set Priority Grouping \details Sets the priority grouping field using the required unlock sequence. @@ -1467,7 +1466,7 @@ __STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB->AIRCR = reg_value; } @@ -1493,7 +1492,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1718,6 +1719,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ } diff --git a/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_starmc1.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_starmc1.h new file mode 100644 index 0000000..d86c8d3 --- /dev/null +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/core_starmc1.h @@ -0,0 +1,3592 @@ +/**************************************************************************//** + * @file core_starmc1.h + * @brief CMSIS ArmChina STAR-MC1 Core Peripheral Access Layer Header File + * @version V1.0.2 + * @date 07. April 2022 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. + * Copyright (c) 2018-2022 Arm China. + * All rights reserved. + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_STAR_H_GENERIC +#define __CORE_STAR_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup STAR-MC1 + @{ + */ + +#include "cmsis_version.h" + +/* Macro Define for STAR-MC1 */ +#define __STAR_MC (1U) /*!< STAR-MC Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_STAR_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_STAR_H_DEPENDANT +#define __CORE_STAR_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __STAR_REV + #define __STAR_REV 0x0000U + #warning "__STAR_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group STAR-MC1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for STAR-MC1 processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED_ADD1[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: F00-D00=0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +typedef struct +{ + __IOM uint32_t CACR; /*!< Offset: 0x0 (R/W) L1 Cache Control Register */ + __IOM uint32_t ITCMCR; /*!< Offset: 0x10 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x14 (R/W) Data Tightly-Coupled Memory Control Registers */ +}EMSS_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +#define SCB_CLIDR_IC_Pos 0U /*!< SCB CLIDR: IC Position */ +#define SCB_CLIDR_IC_Msk (1UL << SCB_CLIDR_IC_Pos) /*!< SCB CLIDR: IC Mask */ + +#define SCB_CLIDR_DC_Pos 1U /*!< SCB CLIDR: DC Position */ +#define SCB_CLIDR_DC_Msk (1UL << SCB_CLIDR_DC_Pos) /*!< SCB CLIDR: DC Mask */ + + + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache line Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_LEVEL_Pos 1U /*!< SCB DCISW: Level Position */ +#define SCB_DCISW_LEVEL_Msk (7UL << SCB_DCISW_LEVEL_Pos) /*!< SCB DCISW: Level Mask */ + +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0xFFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean line by Set-way Register Definitions */ +#define SCB_DCCSW_LEVEL_Pos 1U /*!< SCB DCCSW: Level Position */ +#define SCB_DCCSW_LEVEL_Msk (7UL << SCB_DCCSW_LEVEL_Pos) /*!< SCB DCCSW: Level Mask */ + +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0xFFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_LEVEL_Pos 1U /*!< SCB DCCISW: Level Position */ +#define SCB_DCCISW_LEVEL_Msk (7UL << SCB_DCCISW_LEVEL_Pos) /*!< SCB DCCISW: Level Mask */ + +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0xFFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* ArmChina: Implementation Defined */ +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_DCCLEAN_Pos 16U /*!< SCB CACR: DCCLEAN Position */ +#define SCB_CACR_DCCLEAN_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: DCCLEAN Mask */ + +#define SCB_CACR_ICACTIVE_Pos 13U /*!< SCB CACR: ICACTIVE Position */ +#define SCB_CACR_ICACTIVE_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: ICACTIVE Mask */ + +#define SCB_CACR_DCACTIVE_Pos 12U /*!< SCB CACR: DCACTIVE Position */ +#define SCB_CACR_DCACTIVE_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: DCACTIVE Mask */ + +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define EMSS_BASE (0xE001E000UL) /*!AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses including + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/** + \brief Software Reset + \details Initiates a system reset request to reset the CPU. + */ +__NO_RETURN __STATIC_INLINE void __SW_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses including + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_BFHFNMINS_Msk) | /* Keep BFHFNMINS unchanged. Use this Reset function in case your case need to keep it */ + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | /* Keep priority group unchanged */ + SCB_AIRCR_SYSRESETREQ_Msk ); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#define __SCB_DCACHE_LINE_SIZE 32U /*!< STAR-MC1 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#define __SCB_ICACHE_LINE_SIZE 32U /*!< STAR-MC1 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ +#endif + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_STAR_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/mpu_armv7.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/mpu_armv7.h similarity index 86% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/mpu_armv7.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/mpu_armv7.h index 0142203..d9eedf8 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/mpu_armv7.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/mpu_armv7.h @@ -1,11 +1,11 @@ /****************************************************************************** * @file mpu_armv7.h * @brief CMSIS MPU API for Armv7-M MPU - * @version V5.0.4 - * @date 10. January 2018 + * @version V5.1.2 + * @date 25. May 2020 ******************************************************************************/ /* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * Copyright (c) 2017-2020 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -86,10 +86,10 @@ * \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. */ #define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ - ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ - (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ - (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ - (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) /** * MPU Region Attribute and Size Register Value @@ -100,11 +100,14 @@ * \param SubRegionDisable Sub-region disable field. * \param Size Region size of the region to be configured, for example 4K, 8K. */ -#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ - ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ - (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ - (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) - +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + /** * MPU Region Attribute and Size Register Value * @@ -131,7 +134,7 @@ /** * MPU Memory Access Attribute for device memory. -* - TEX: 000b (if non-shareable) or 010b (if shareable) +* - TEX: 000b (if shareable) or 010b (if non-shareable) * - Shareable or non-shareable * - Non-cacheable * - Bufferable (if shareable) or non-bufferable (if non-shareable) @@ -151,7 +154,7 @@ * \param InnerCp Configures the inner cache policy. * \param IsShareable Configures the memory as shareable or non-shareable. */ -#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) >> 1U), ((InnerCp) & 1U)) /** * MPU Memory Access Attribute non-cacheable policy. @@ -187,24 +190,26 @@ typedef struct { */ __STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) { - __DSB(); - __ISB(); + __DMB(); MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; #endif + __DSB(); + __ISB(); } /** Disable the MPU. */ __STATIC_INLINE void ARM_MPU_Disable(void) { - __DSB(); - __ISB(); + __DMB(); #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; #endif MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); } /** Clear and disable the given MPU region. @@ -218,7 +223,7 @@ __STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) /** Configure an MPU region. * \param rbar Value for RBAR register. -* \param rsar Value for RSAR register. +* \param rasr Value for RASR register. */ __STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) { @@ -229,7 +234,7 @@ __STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) /** Configure the given MPU region. * \param rnr Region number to be configured. * \param rbar Value for RBAR register. -* \param rsar Value for RSAR register. +* \param rasr Value for RASR register. */ __STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) { @@ -238,12 +243,12 @@ __STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t r MPU->RASR = rasr; } -/** Memcopy with strictly ordered memory access, e.g. for register targets. +/** Memcpy with strictly ordered memory access, e.g. used by code in ARM_MPU_Load(). * \param dst Destination data is copied to. * \param src Source data is copied from. * \param len Amount of data words to be copied. */ -__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) { uint32_t i; for (i = 0U; i < len; ++i) @@ -260,11 +265,11 @@ __STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) { const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; while (cnt > MPU_TYPE_RALIASES) { - orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); table += MPU_TYPE_RALIASES; cnt -= MPU_TYPE_RALIASES; } - orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); } #endif diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/mpu_armv8.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/mpu_armv8.h similarity index 84% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/mpu_armv8.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/mpu_armv8.h index 62571da..3de16ef 100644 --- a/workspace/stm32f407_default/Drivers/CMSIS/Include/mpu_armv8.h +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/mpu_armv8.h @@ -1,11 +1,11 @@ /****************************************************************************** * @file mpu_armv8.h - * @brief CMSIS MPU API for Armv8-M MPU - * @version V5.0.4 - * @date 10. January 2018 + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.3 + * @date 03. February 2021 ******************************************************************************/ /* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * Copyright (c) 2017-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -44,7 +44,7 @@ * \param WA Write Allocation: Set to 1 to use cache allocation on write miss. */ #define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ - (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + ((((NT) & 1U) << 3U) | (((WB) & 1U) << 2U) | (((RA) & 1U) << 1U) | ((WA) & 1U)) /** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ #define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) @@ -62,7 +62,7 @@ * \param O Outer memory attributes * \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes */ -#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) +#define ARM_MPU_ATTR(O, I) ((((O) & 0xFU) << 4U) | ((((O) & 0xFU) != 0U) ? ((I) & 0xFU) : (((I) & 0x3U) << 2U))) /** \brief Normal memory non-shareable */ #define ARM_MPU_SH_NON (0U) @@ -77,7 +77,7 @@ * \param RO Read-Only: Set to 1 for read-only memory. * \param NP Non-Privileged: Set to 1 for non-privileged memory. */ -#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) +#define ARM_MPU_AP_(RO, NP) ((((RO) & 1U) << 1U) | ((NP) & 1U)) /** \brief Region Base Address Register value * \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. @@ -87,20 +87,35 @@ * \oaram XN eXecute Never: Set to 1 for a non-executable memory region. */ #define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ - ((BASE & MPU_RBAR_BASE_Msk) | \ - ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + (((BASE) & MPU_RBAR_BASE_Msk) | \ + (((SH) << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ - ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + (((XN) << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) /** \brief Region Limit Address Register value * \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. * \param IDX The attribute index to be associated with this memory region. */ #define ARM_MPU_RLAR(LIMIT, IDX) \ - ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ - ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (((LIMIT) & MPU_RLAR_LIMIT_Msk) | \ + (((IDX) << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ (MPU_RLAR_EN_Msk)) +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + (((LIMIT) & MPU_RLAR_LIMIT_Msk) | \ + (((PXN) << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + (((IDX) << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + /** * Struct for a single MPU Region */ @@ -114,24 +129,26 @@ typedef struct { */ __STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) { - __DSB(); - __ISB(); + __DMB(); MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; #endif + __DSB(); + __ISB(); } /** Disable the MPU. */ __STATIC_INLINE void ARM_MPU_Disable(void) { - __DSB(); - __ISB(); + __DMB(); #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; #endif MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); } #ifdef MPU_NS @@ -140,24 +157,26 @@ __STATIC_INLINE void ARM_MPU_Disable(void) */ __STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) { - __DSB(); - __ISB(); + __DMB(); MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; #endif + __DSB(); + __ISB(); } /** Disable the Non-secure MPU. */ __STATIC_INLINE void ARM_MPU_Disable_NS(void) { - __DSB(); - __ISB(); + __DMB(); #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; #endif MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); } #endif @@ -262,12 +281,12 @@ __STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t } #endif -/** Memcopy with strictly ordered memory access, e.g. for register targets. +/** Memcpy with strictly ordered memory access, e.g. used by code in ARM_MPU_LoadEx() * \param dst Destination data is copied to. * \param src Source data is copied from. * \param len Amount of data words to be copied. */ -__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) { uint32_t i; for (i = 0U; i < len; ++i) @@ -287,7 +306,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; if (cnt == 1U) { mpu->RNR = rnr; - orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); } else { uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; @@ -295,7 +314,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ mpu->RNR = rnrBase; while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { uint32_t c = MPU_TYPE_RALIASES - rnrOffset; - orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); table += c; cnt -= c; rnrOffset = 0U; @@ -303,7 +322,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ mpu->RNR = rnrBase; } - orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); } } diff --git a/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/pac_armv81.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/pac_armv81.h new file mode 100644 index 0000000..854b60a --- /dev/null +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/pac_armv81.h @@ -0,0 +1,206 @@ +/****************************************************************************** + * @file pac_armv81.h + * @brief CMSIS PAC key functions for Armv8.1-M PAC extension + * @version V1.0.0 + * @date 23. March 2022 + ******************************************************************************/ +/* + * Copyright (c) 2022 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef PAC_ARMV81_H +#define PAC_ARMV81_H + + +/* ################### PAC Key functions ########################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_PacKeyFunctions PAC Key functions + \brief Functions that access the PAC keys. + @{ + */ + +#if (defined (__ARM_FEATURE_PAUTH) && (__ARM_FEATURE_PAUTH == 1)) + +/** + \brief read the PAC key used for privileged mode + \details Reads the PAC key stored in the PAC_KEY_P registers. + \param [out] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __get_PAC_KEY_P (uint32_t* pPacKey) { + __ASM volatile ( + "mrs r1, pac_key_p_0\n" + "str r1,[%0,#0]\n" + "mrs r1, pac_key_p_1\n" + "str r1,[%0,#4]\n" + "mrs r1, pac_key_p_2\n" + "str r1,[%0,#8]\n" + "mrs r1, pac_key_p_3\n" + "str r1,[%0,#12]\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief write the PAC key used for privileged mode + \details writes the given PAC key to the PAC_KEY_P registers. + \param [in] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __set_PAC_KEY_P (uint32_t* pPacKey) { + __ASM volatile ( + "ldr r1,[%0,#0]\n" + "msr pac_key_p_0, r1\n" + "ldr r1,[%0,#4]\n" + "msr pac_key_p_1, r1\n" + "ldr r1,[%0,#8]\n" + "msr pac_key_p_2, r1\n" + "ldr r1,[%0,#12]\n" + "msr pac_key_p_3, r1\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief read the PAC key used for unprivileged mode + \details Reads the PAC key stored in the PAC_KEY_U registers. + \param [out] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __get_PAC_KEY_U (uint32_t* pPacKey) { + __ASM volatile ( + "mrs r1, pac_key_u_0\n" + "str r1,[%0,#0]\n" + "mrs r1, pac_key_u_1\n" + "str r1,[%0,#4]\n" + "mrs r1, pac_key_u_2\n" + "str r1,[%0,#8]\n" + "mrs r1, pac_key_u_3\n" + "str r1,[%0,#12]\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief write the PAC key used for unprivileged mode + \details writes the given PAC key to the PAC_KEY_U registers. + \param [in] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __set_PAC_KEY_U (uint32_t* pPacKey) { + __ASM volatile ( + "ldr r1,[%0,#0]\n" + "msr pac_key_u_0, r1\n" + "ldr r1,[%0,#4]\n" + "msr pac_key_u_1, r1\n" + "ldr r1,[%0,#8]\n" + "msr pac_key_u_2, r1\n" + "ldr r1,[%0,#12]\n" + "msr pac_key_u_3, r1\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) + +/** + \brief read the PAC key used for privileged mode (non-secure) + \details Reads the PAC key stored in the non-secure PAC_KEY_P registers when in secure mode. + \param [out] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __TZ_get_PAC_KEY_P_NS (uint32_t* pPacKey) { + __ASM volatile ( + "mrs r1, pac_key_p_0_ns\n" + "str r1,[%0,#0]\n" + "mrs r1, pac_key_p_1_ns\n" + "str r1,[%0,#4]\n" + "mrs r1, pac_key_p_2_ns\n" + "str r1,[%0,#8]\n" + "mrs r1, pac_key_p_3_ns\n" + "str r1,[%0,#12]\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief write the PAC key used for privileged mode (non-secure) + \details writes the given PAC key to the non-secure PAC_KEY_P registers when in secure mode. + \param [in] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __TZ_set_PAC_KEY_P_NS (uint32_t* pPacKey) { + __ASM volatile ( + "ldr r1,[%0,#0]\n" + "msr pac_key_p_0_ns, r1\n" + "ldr r1,[%0,#4]\n" + "msr pac_key_p_1_ns, r1\n" + "ldr r1,[%0,#8]\n" + "msr pac_key_p_2_ns, r1\n" + "ldr r1,[%0,#12]\n" + "msr pac_key_p_3_ns, r1\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief read the PAC key used for unprivileged mode (non-secure) + \details Reads the PAC key stored in the non-secure PAC_KEY_U registers when in secure mode. + \param [out] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __TZ_get_PAC_KEY_U_NS (uint32_t* pPacKey) { + __ASM volatile ( + "mrs r1, pac_key_u_0_ns\n" + "str r1,[%0,#0]\n" + "mrs r1, pac_key_u_1_ns\n" + "str r1,[%0,#4]\n" + "mrs r1, pac_key_u_2_ns\n" + "str r1,[%0,#8]\n" + "mrs r1, pac_key_u_3_ns\n" + "str r1,[%0,#12]\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief write the PAC key used for unprivileged mode (non-secure) + \details writes the given PAC key to the non-secure PAC_KEY_U registers when in secure mode. + \param [in] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __TZ_set_PAC_KEY_U_NS (uint32_t* pPacKey) { + __ASM volatile ( + "ldr r1,[%0,#0]\n" + "msr pac_key_u_0_ns, r1\n" + "ldr r1,[%0,#4]\n" + "msr pac_key_u_1_ns, r1\n" + "ldr r1,[%0,#8]\n" + "msr pac_key_u_2_ns, r1\n" + "ldr r1,[%0,#12]\n" + "msr pac_key_u_3_ns, r1\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +#endif /* (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) */ + +#endif /* (defined (__ARM_FEATURE_PAUTH) && (__ARM_FEATURE_PAUTH == 1)) */ + +/*@} end of CMSIS_Core_PacKeyFunctions */ + + +#endif /* PAC_ARMV81_H */ diff --git a/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/pmu_armv8.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/pmu_armv8.h new file mode 100644 index 0000000..f8f3d89 --- /dev/null +++ b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/pmu_armv8.h @@ -0,0 +1,337 @@ +/****************************************************************************** + * @file pmu_armv8.h + * @brief CMSIS PMU API for Armv8.1-M PMU + * @version V1.0.1 + * @date 15. April 2020 + ******************************************************************************/ +/* + * Copyright (c) 2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_PMU_ARMV8_H +#define ARM_PMU_ARMV8_H + +/** + * \brief PMU Events + * \note See the Armv8.1-M Architecture Reference Manual for full details on these PMU events. + * */ + +#define ARM_PMU_SW_INCR 0x0000 /*!< Software update to the PMU_SWINC register, architecturally executed and condition code check pass */ +#define ARM_PMU_L1I_CACHE_REFILL 0x0001 /*!< L1 I-Cache refill */ +#define ARM_PMU_L1D_CACHE_REFILL 0x0003 /*!< L1 D-Cache refill */ +#define ARM_PMU_L1D_CACHE 0x0004 /*!< L1 D-Cache access */ +#define ARM_PMU_LD_RETIRED 0x0006 /*!< Memory-reading instruction architecturally executed and condition code check pass */ +#define ARM_PMU_ST_RETIRED 0x0007 /*!< Memory-writing instruction architecturally executed and condition code check pass */ +#define ARM_PMU_INST_RETIRED 0x0008 /*!< Instruction architecturally executed */ +#define ARM_PMU_EXC_TAKEN 0x0009 /*!< Exception entry */ +#define ARM_PMU_EXC_RETURN 0x000A /*!< Exception return instruction architecturally executed and the condition code check pass */ +#define ARM_PMU_PC_WRITE_RETIRED 0x000C /*!< Software change to the Program Counter (PC). Instruction is architecturally executed and condition code check pass */ +#define ARM_PMU_BR_IMMED_RETIRED 0x000D /*!< Immediate branch architecturally executed */ +#define ARM_PMU_BR_RETURN_RETIRED 0x000E /*!< Function return instruction architecturally executed and the condition code check pass */ +#define ARM_PMU_UNALIGNED_LDST_RETIRED 0x000F /*!< Unaligned memory memory-reading or memory-writing instruction architecturally executed and condition code check pass */ +#define ARM_PMU_BR_MIS_PRED 0x0010 /*!< Mispredicted or not predicted branch speculatively executed */ +#define ARM_PMU_CPU_CYCLES 0x0011 /*!< Cycle */ +#define ARM_PMU_BR_PRED 0x0012 /*!< Predictable branch speculatively executed */ +#define ARM_PMU_MEM_ACCESS 0x0013 /*!< Data memory access */ +#define ARM_PMU_L1I_CACHE 0x0014 /*!< Level 1 instruction cache access */ +#define ARM_PMU_L1D_CACHE_WB 0x0015 /*!< Level 1 data cache write-back */ +#define ARM_PMU_L2D_CACHE 0x0016 /*!< Level 2 data cache access */ +#define ARM_PMU_L2D_CACHE_REFILL 0x0017 /*!< Level 2 data cache refill */ +#define ARM_PMU_L2D_CACHE_WB 0x0018 /*!< Level 2 data cache write-back */ +#define ARM_PMU_BUS_ACCESS 0x0019 /*!< Bus access */ +#define ARM_PMU_MEMORY_ERROR 0x001A /*!< Local memory error */ +#define ARM_PMU_INST_SPEC 0x001B /*!< Instruction speculatively executed */ +#define ARM_PMU_BUS_CYCLES 0x001D /*!< Bus cycles */ +#define ARM_PMU_CHAIN 0x001E /*!< For an odd numbered counter, increment when an overflow occurs on the preceding even-numbered counter on the same PE */ +#define ARM_PMU_L1D_CACHE_ALLOCATE 0x001F /*!< Level 1 data cache allocation without refill */ +#define ARM_PMU_L2D_CACHE_ALLOCATE 0x0020 /*!< Level 2 data cache allocation without refill */ +#define ARM_PMU_BR_RETIRED 0x0021 /*!< Branch instruction architecturally executed */ +#define ARM_PMU_BR_MIS_PRED_RETIRED 0x0022 /*!< Mispredicted branch instruction architecturally executed */ +#define ARM_PMU_STALL_FRONTEND 0x0023 /*!< No operation issued because of the frontend */ +#define ARM_PMU_STALL_BACKEND 0x0024 /*!< No operation issued because of the backend */ +#define ARM_PMU_L2I_CACHE 0x0027 /*!< Level 2 instruction cache access */ +#define ARM_PMU_L2I_CACHE_REFILL 0x0028 /*!< Level 2 instruction cache refill */ +#define ARM_PMU_L3D_CACHE_ALLOCATE 0x0029 /*!< Level 3 data cache allocation without refill */ +#define ARM_PMU_L3D_CACHE_REFILL 0x002A /*!< Level 3 data cache refill */ +#define ARM_PMU_L3D_CACHE 0x002B /*!< Level 3 data cache access */ +#define ARM_PMU_L3D_CACHE_WB 0x002C /*!< Level 3 data cache write-back */ +#define ARM_PMU_LL_CACHE_RD 0x0036 /*!< Last level data cache read */ +#define ARM_PMU_LL_CACHE_MISS_RD 0x0037 /*!< Last level data cache read miss */ +#define ARM_PMU_L1D_CACHE_MISS_RD 0x0039 /*!< Level 1 data cache read miss */ +#define ARM_PMU_OP_COMPLETE 0x003A /*!< Operation retired */ +#define ARM_PMU_OP_SPEC 0x003B /*!< Operation speculatively executed */ +#define ARM_PMU_STALL 0x003C /*!< Stall cycle for instruction or operation not sent for execution */ +#define ARM_PMU_STALL_OP_BACKEND 0x003D /*!< Stall cycle for instruction or operation not sent for execution due to pipeline backend */ +#define ARM_PMU_STALL_OP_FRONTEND 0x003E /*!< Stall cycle for instruction or operation not sent for execution due to pipeline frontend */ +#define ARM_PMU_STALL_OP 0x003F /*!< Instruction or operation slots not occupied each cycle */ +#define ARM_PMU_L1D_CACHE_RD 0x0040 /*!< Level 1 data cache read */ +#define ARM_PMU_LE_RETIRED 0x0100 /*!< Loop end instruction executed */ +#define ARM_PMU_LE_SPEC 0x0101 /*!< Loop end instruction speculatively executed */ +#define ARM_PMU_BF_RETIRED 0x0104 /*!< Branch future instruction architecturally executed and condition code check pass */ +#define ARM_PMU_BF_SPEC 0x0105 /*!< Branch future instruction speculatively executed and condition code check pass */ +#define ARM_PMU_LE_CANCEL 0x0108 /*!< Loop end instruction not taken */ +#define ARM_PMU_BF_CANCEL 0x0109 /*!< Branch future instruction not taken */ +#define ARM_PMU_SE_CALL_S 0x0114 /*!< Call to secure function, resulting in Security state change */ +#define ARM_PMU_SE_CALL_NS 0x0115 /*!< Call to non-secure function, resulting in Security state change */ +#define ARM_PMU_DWT_CMPMATCH0 0x0118 /*!< DWT comparator 0 match */ +#define ARM_PMU_DWT_CMPMATCH1 0x0119 /*!< DWT comparator 1 match */ +#define ARM_PMU_DWT_CMPMATCH2 0x011A /*!< DWT comparator 2 match */ +#define ARM_PMU_DWT_CMPMATCH3 0x011B /*!< DWT comparator 3 match */ +#define ARM_PMU_MVE_INST_RETIRED 0x0200 /*!< MVE instruction architecturally executed */ +#define ARM_PMU_MVE_INST_SPEC 0x0201 /*!< MVE instruction speculatively executed */ +#define ARM_PMU_MVE_FP_RETIRED 0x0204 /*!< MVE floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_SPEC 0x0205 /*!< MVE floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_HP_RETIRED 0x0208 /*!< MVE half-precision floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_HP_SPEC 0x0209 /*!< MVE half-precision floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_SP_RETIRED 0x020C /*!< MVE single-precision floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_SP_SPEC 0x020D /*!< MVE single-precision floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_MAC_RETIRED 0x0214 /*!< MVE floating-point multiply or multiply-accumulate instruction architecturally executed */ +#define ARM_PMU_MVE_FP_MAC_SPEC 0x0215 /*!< MVE floating-point multiply or multiply-accumulate instruction speculatively executed */ +#define ARM_PMU_MVE_INT_RETIRED 0x0224 /*!< MVE integer instruction architecturally executed */ +#define ARM_PMU_MVE_INT_SPEC 0x0225 /*!< MVE integer instruction speculatively executed */ +#define ARM_PMU_MVE_INT_MAC_RETIRED 0x0228 /*!< MVE multiply or multiply-accumulate instruction architecturally executed */ +#define ARM_PMU_MVE_INT_MAC_SPEC 0x0229 /*!< MVE multiply or multiply-accumulate instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_RETIRED 0x0238 /*!< MVE load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_SPEC 0x0239 /*!< MVE load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_RETIRED 0x023C /*!< MVE load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_SPEC 0x023D /*!< MVE load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_RETIRED 0x0240 /*!< MVE store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_SPEC 0x0241 /*!< MVE store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_CONTIG_RETIRED 0x0244 /*!< MVE contiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_CONTIG_SPEC 0x0245 /*!< MVE contiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_CONTIG_RETIRED 0x0248 /*!< MVE contiguous load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_CONTIG_SPEC 0x0249 /*!< MVE contiguous load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_CONTIG_RETIRED 0x024C /*!< MVE contiguous store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_CONTIG_SPEC 0x024D /*!< MVE contiguous store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_NONCONTIG_RETIRED 0x0250 /*!< MVE non-contiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_NONCONTIG_SPEC 0x0251 /*!< MVE non-contiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_NONCONTIG_RETIRED 0x0254 /*!< MVE non-contiguous load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_NONCONTIG_SPEC 0x0255 /*!< MVE non-contiguous load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_NONCONTIG_RETIRED 0x0258 /*!< MVE non-contiguous store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_NONCONTIG_SPEC 0x0259 /*!< MVE non-contiguous store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_MULTI_RETIRED 0x025C /*!< MVE memory instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_LDST_MULTI_SPEC 0x025D /*!< MVE memory instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_LD_MULTI_RETIRED 0x0260 /*!< MVE memory load instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_LD_MULTI_SPEC 0x0261 /*!< MVE memory load instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_ST_MULTI_RETIRED 0x0261 /*!< MVE memory store instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_ST_MULTI_SPEC 0x0265 /*!< MVE memory store instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_RETIRED 0x028C /*!< MVE unaligned memory load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_SPEC 0x028D /*!< MVE unaligned memory load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_UNALIGNED_RETIRED 0x0290 /*!< MVE unaligned load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_UNALIGNED_SPEC 0x0291 /*!< MVE unaligned load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_UNALIGNED_RETIRED 0x0294 /*!< MVE unaligned store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_UNALIGNED_SPEC 0x0295 /*!< MVE unaligned store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_NONCONTIG_RETIRED 0x0298 /*!< MVE unaligned noncontiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_NONCONTIG_SPEC 0x0299 /*!< MVE unaligned noncontiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_RETIRED 0x02A0 /*!< MVE vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_SPEC 0x02A1 /*!< MVE vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_FP_RETIRED 0x02A4 /*!< MVE floating-point vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_FP_SPEC 0x02A5 /*!< MVE floating-point vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_INT_RETIRED 0x02A8 /*!< MVE integer vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_INT_SPEC 0x02A9 /*!< MVE integer vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_PRED 0x02B8 /*!< Cycles where one or more predicated beats architecturally executed */ +#define ARM_PMU_MVE_STALL 0x02CC /*!< Stall cycles caused by an MVE instruction */ +#define ARM_PMU_MVE_STALL_RESOURCE 0x02CD /*!< Stall cycles caused by an MVE instruction because of resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_MEM 0x02CE /*!< Stall cycles caused by an MVE instruction because of memory resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_FP 0x02CF /*!< Stall cycles caused by an MVE instruction because of floating-point resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_INT 0x02D0 /*!< Stall cycles caused by an MVE instruction because of integer resource conflicts */ +#define ARM_PMU_MVE_STALL_BREAK 0x02D3 /*!< Stall cycles caused by an MVE chain break */ +#define ARM_PMU_MVE_STALL_DEPENDENCY 0x02D4 /*!< Stall cycles caused by MVE register dependency */ +#define ARM_PMU_ITCM_ACCESS 0x4007 /*!< Instruction TCM access */ +#define ARM_PMU_DTCM_ACCESS 0x4008 /*!< Data TCM access */ +#define ARM_PMU_TRCEXTOUT0 0x4010 /*!< ETM external output 0 */ +#define ARM_PMU_TRCEXTOUT1 0x4011 /*!< ETM external output 1 */ +#define ARM_PMU_TRCEXTOUT2 0x4012 /*!< ETM external output 2 */ +#define ARM_PMU_TRCEXTOUT3 0x4013 /*!< ETM external output 3 */ +#define ARM_PMU_CTI_TRIGOUT4 0x4018 /*!< Cross-trigger Interface output trigger 4 */ +#define ARM_PMU_CTI_TRIGOUT5 0x4019 /*!< Cross-trigger Interface output trigger 5 */ +#define ARM_PMU_CTI_TRIGOUT6 0x401A /*!< Cross-trigger Interface output trigger 6 */ +#define ARM_PMU_CTI_TRIGOUT7 0x401B /*!< Cross-trigger Interface output trigger 7 */ + +/** \brief PMU Functions */ + +__STATIC_INLINE void ARM_PMU_Enable(void); +__STATIC_INLINE void ARM_PMU_Disable(void); + +__STATIC_INLINE void ARM_PMU_Set_EVTYPER(uint32_t num, uint32_t type); + +__STATIC_INLINE void ARM_PMU_CYCCNT_Reset(void); +__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset(void); + +__STATIC_INLINE void ARM_PMU_CNTR_Enable(uint32_t mask); +__STATIC_INLINE void ARM_PMU_CNTR_Disable(uint32_t mask); + +__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR(void); +__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR(uint32_t num); + +__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS(void); +__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS(uint32_t mask); + +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable(uint32_t mask); +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable(uint32_t mask); + +__STATIC_INLINE void ARM_PMU_CNTR_Increment(uint32_t mask); + +/** + \brief Enable the PMU +*/ +__STATIC_INLINE void ARM_PMU_Enable(void) +{ + PMU->CTRL |= PMU_CTRL_ENABLE_Msk; +} + +/** + \brief Disable the PMU +*/ +__STATIC_INLINE void ARM_PMU_Disable(void) +{ + PMU->CTRL &= ~PMU_CTRL_ENABLE_Msk; +} + +/** + \brief Set event to count for PMU eventer counter + \param [in] num Event counter (0-30) to configure + \param [in] type Event to count +*/ +__STATIC_INLINE void ARM_PMU_Set_EVTYPER(uint32_t num, uint32_t type) +{ + PMU->EVTYPER[num] = type; +} + +/** + \brief Reset cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CYCCNT_Reset(void) +{ + PMU->CTRL |= PMU_CTRL_CYCCNT_RESET_Msk; +} + +/** + \brief Reset all event counters +*/ +__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset(void) +{ + PMU->CTRL |= PMU_CTRL_EVENTCNT_RESET_Msk; +} + +/** + \brief Enable counters + \param [in] mask Counters to enable + \note Enables one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Enable(uint32_t mask) +{ + PMU->CNTENSET = mask; +} + +/** + \brief Disable counters + \param [in] mask Counters to enable + \note Disables one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Disable(uint32_t mask) +{ + PMU->CNTENCLR = mask; +} + +/** + \brief Read cycle counter + \return Cycle count +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR(void) +{ + return PMU->CCNTR; +} + +/** + \brief Read event counter + \param [in] num Event counter (0-30) to read + \return Event count +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR(uint32_t num) +{ + return PMU_EVCNTR_CNT_Msk & PMU->EVCNTR[num]; +} + +/** + \brief Read counter overflow status + \return Counter overflow status bits for the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS(void) +{ + return PMU->OVSSET; +} + +/** + \brief Clear counter overflow status + \param [in] mask Counter overflow status bits to clear + \note Clears overflow status bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS(uint32_t mask) +{ + PMU->OVSCLR = mask; +} + +/** + \brief Enable counter overflow interrupt request + \param [in] mask Counter overflow interrupt request bits to set + \note Sets overflow interrupt request bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable(uint32_t mask) +{ + PMU->INTENSET = mask; +} + +/** + \brief Disable counter overflow interrupt request + \param [in] mask Counter overflow interrupt request bits to clear + \note Clears overflow interrupt request bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable(uint32_t mask) +{ + PMU->INTENCLR = mask; +} + +/** + \brief Software increment event counter + \param [in] mask Counters to increment + \note Software increment bits for one or more event counters (0-30) +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Increment(uint32_t mask) +{ + PMU->SWINC = mask; +} + +#endif diff --git a/workspace/stm32f407_default/Drivers/CMSIS/Include/tz_context.h b/workspace/stm32f407_cmsis/Drivers/CMSIS/Include/tz_context.h similarity index 100% rename from workspace/stm32f407_default/Drivers/CMSIS/Include/tz_context.h rename to workspace/stm32f407_cmsis/Drivers/CMSIS/Include/tz_context.h diff --git a/workspace/stm32f407_default/Drivers/CMSIS/LICENSE.txt b/workspace/stm32f407_cmsis/Drivers/CMSIS/LICENSE.txt similarity index 100% rename from workspace/stm32f407_default/Drivers/CMSIS/LICENSE.txt rename to workspace/stm32f407_cmsis/Drivers/CMSIS/LICENSE.txt diff --git a/workspace/stm32f407_default/STM32F407VGTX_FLASH.ld b/workspace/stm32f407_cmsis/STM32F407VGTX_FLASH.ld similarity index 84% rename from workspace/stm32f407_default/STM32F407VGTX_FLASH.ld rename to workspace/stm32f407_cmsis/STM32F407VGTX_FLASH.ld index 8ea04af..4fd73d0 100644 --- a/workspace/stm32f407_default/STM32F407VGTX_FLASH.ld +++ b/workspace/stm32f407_cmsis/STM32F407VGTX_FLASH.ld @@ -5,10 +5,10 @@ ** ** @author : Auto-generated by STM32CubeIDE ** -** Abstract : Linker script for STM32F407G-DISC1 Board embedding STM32F407VGTx Device from stm32f4 series -** 1024Kbytes FLASH -** 64Kbytes CCMRAM -** 128Kbytes RAM +** @brief : Linker script for STM32F407VGTx Device from STM32F4 series +** 1024KBytes FLASH +** 64KBytes CCMRAM +** 128KBytes RAM ** ** Set heap size, stack size and stack location according ** to application requirements. @@ -23,7 +23,7 @@ ****************************************************************************** ** @attention ** -** Copyright (c) 2023 STMicroelectronics. +** Copyright (c) 2026 STMicroelectronics. ** All rights reserved. ** ** This software is licensed under terms that can be found in the LICENSE file @@ -53,6 +53,7 @@ MEMORY /* Sections */ SECTIONS { + /* The startup code into "FLASH" Rom type memory */ .isr_vector : { @@ -87,13 +88,15 @@ SECTIONS . = ALIGN(4); } >FLASH - .ARM.extab : { + .ARM.extab (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >FLASH - .ARM : { + .ARM (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { . = ALIGN(4); __exidx_start = .; *(.ARM.exidx*) @@ -101,7 +104,7 @@ SECTIONS . = ALIGN(4); } >FLASH - .preinit_array : + .preinit_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ { . = ALIGN(4); PROVIDE_HIDDEN (__preinit_array_start = .); @@ -110,7 +113,7 @@ SECTIONS . = ALIGN(4); } >FLASH - .init_array : + .init_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ { . = ALIGN(4); PROVIDE_HIDDEN (__init_array_start = .); @@ -120,7 +123,7 @@ SECTIONS . = ALIGN(4); } >FLASH - .fini_array : + .fini_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ { . = ALIGN(4); PROVIDE_HIDDEN (__fini_array_start = .); diff --git a/workspace/stm32f407_default/STM32F407VGTX_RAM.ld b/workspace/stm32f407_cmsis/STM32F407VGTX_RAM.ld similarity index 84% rename from workspace/stm32f407_default/STM32F407VGTX_RAM.ld rename to workspace/stm32f407_cmsis/STM32F407VGTX_RAM.ld index e0f67d1..90e6d8f 100644 --- a/workspace/stm32f407_default/STM32F407VGTX_RAM.ld +++ b/workspace/stm32f407_cmsis/STM32F407VGTX_RAM.ld @@ -5,10 +5,10 @@ ** ** @author : Auto-generated by STM32CubeIDE ** -** Abstract : Linker script for STM32F407G-DISC1 Board embedding STM32F407VGTx Device from stm32f4 series -** 1024Kbytes FLASH -** 64Kbytes CCMRAM -** 128Kbytes RAM +** @brief : Linker script for STM32F407VGTx Device from STM32F4 series +** 1024KBytes FLASH +** 64KBytes CCMRAM +** 128KBytes RAM ** ** Set heap size, stack size and stack location according ** to application requirements. @@ -23,7 +23,7 @@ ****************************************************************************** ** @attention ** -** Copyright (c) 2023 STMicroelectronics. +** Copyright (c) 2026 STMicroelectronics. ** All rights reserved. ** ** This software is licensed under terms that can be found in the LICENSE file @@ -53,6 +53,7 @@ MEMORY /* Sections */ SECTIONS { + /* The startup code into "RAM" Ram type memory */ .isr_vector : { @@ -89,13 +90,15 @@ SECTIONS . = ALIGN(4); } >RAM - .ARM.extab : { + .ARM.extab (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >RAM - .ARM : { + .ARM (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { . = ALIGN(4); __exidx_start = .; *(.ARM.exidx*) @@ -103,7 +106,7 @@ SECTIONS . = ALIGN(4); } >RAM - .preinit_array : + .preinit_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ { . = ALIGN(4); PROVIDE_HIDDEN (__preinit_array_start = .); @@ -112,7 +115,7 @@ SECTIONS . = ALIGN(4); } >RAM - .init_array : + .init_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ { . = ALIGN(4); PROVIDE_HIDDEN (__init_array_start = .); @@ -122,7 +125,7 @@ SECTIONS . = ALIGN(4); } >RAM - .fini_array : + .fini_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ { . = ALIGN(4); PROVIDE_HIDDEN (__fini_array_start = .); diff --git a/workspace/stm32f407_default/.cproject b/workspace/stm32f407_default/.cproject deleted file mode 100644 index daff0b7..0000000 --- a/workspace/stm32f407_default/.cproject +++ /dev/null @@ -1,188 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \ No newline at end of file diff --git a/workspace/stm32f407_default/.mxproject b/workspace/stm32f407_default/.mxproject deleted file mode 100644 index 932b5a0..0000000 --- a/workspace/stm32f407_default/.mxproject +++ /dev/null @@ -1,35 +0,0 @@ -[PreviousGenFiles] -AdvancedFolderStructure=true -HeaderFileListSize=6 -HeaderFiles#0=..\USB_HOST\App\usb_host.h -HeaderFiles#1=..\USB_HOST\Target\usbh_conf.h -HeaderFiles#2=..\USB_HOST\Target\usbh_platform.h -HeaderFiles#3=..\Core\Inc\stm32f4xx_it.h -HeaderFiles#4=..\Core\Inc\stm32f4xx_hal_conf.h -HeaderFiles#5=..\Core\Inc\main.h -HeaderFolderListSize=3 -HeaderPath#0=..\USB_HOST\App -HeaderPath#1=..\USB_HOST\Target -HeaderPath#2=..\Core\Inc -HeaderFiles=; -SourceFileListSize=6 -SourceFiles#0=..\USB_HOST\App\usb_host.c -SourceFiles#1=..\USB_HOST\Target\usbh_conf.c -SourceFiles#2=..\USB_HOST\Target\usbh_platform.c -SourceFiles#3=..\Core\Src\stm32f4xx_it.c -SourceFiles#4=..\Core\Src\stm32f4xx_hal_msp.c -SourceFiles#5=..\Core\Src\main.c -SourceFolderListSize=3 -SourcePath#0=..\USB_HOST\App -SourcePath#1=..\USB_HOST\Target -SourcePath#2=..\Core\Src -SourceFiles=; - -[PreviousLibFiles] -LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_hcd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usb.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2s.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2s_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_core.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_ctlreq.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_def.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_ioreq.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_pipes.h;Middlewares\ST\STM32_USB_Host_Library\Class\CDC\Inc\usbh_cdc.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_core.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_ctlreq.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_ioreq.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_pipes.c;Middlewares\ST\STM32_USB_Host_Library\Class\CDC\Src\usbh_cdc.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_hcd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usb.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2s.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2s_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_core.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_ctlreq.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_def.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_ioreq.h;Middlewares\ST\STM32_USB_Host_Library\Core\Inc\usbh_pipes.h;Middlewares\ST\STM32_USB_Host_Library\Class\CDC\Inc\usbh_cdc.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f407xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; - -[PreviousUsedCubeIDEFiles] -SourceFiles=Core\Src\main.c;USB_HOST\App\usb_host.c;USB_HOST\Target\usbh_conf.c;USB_HOST\Target\usbh_platform.c;Core\Src\stm32f4xx_it.c;Core\Src\stm32f4xx_hal_msp.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_core.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_ctlreq.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_ioreq.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_pipes.c;Middlewares\ST\STM32_USB_Host_Library\Class\CDC\Src\usbh_cdc.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Core\Src\system_stm32f4xx.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_core.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_ctlreq.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_ioreq.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_pipes.c;Middlewares\ST\STM32_USB_Host_Library\Class\CDC\Src\usbh_cdc.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Core\Src\system_stm32f4xx.c;;;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_core.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_ctlreq.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_ioreq.c;Middlewares\ST\STM32_USB_Host_Library\Core\Src\usbh_pipes.c;Middlewares\ST\STM32_USB_Host_Library\Class\CDC\Src\usbh_cdc.c; -HeaderPath=Drivers\STM32F4xx_HAL_Driver\Inc;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;Middlewares\ST\STM32_USB_Host_Library\Core\Inc;Middlewares\ST\STM32_USB_Host_Library\Class\CDC\Inc;Drivers\CMSIS\Device\ST\STM32F4xx\Include;Drivers\CMSIS\Include;USB_HOST\App;USB_HOST\Target;Core\Inc; -CDefines=USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER; - diff --git a/workspace/stm32f407_default/.settings/stm32cubeide.project.prefs b/workspace/stm32f407_default/.settings/stm32cubeide.project.prefs deleted file mode 100644 index 53ad00c..0000000 --- a/workspace/stm32f407_default/.settings/stm32cubeide.project.prefs +++ /dev/null @@ -1,3 +0,0 @@ -8DF89ED150041C4CBC7CB9A9CAA90856=4AC6825A44CA08D33E9C0C400C376DFD -DC22A860405A8BF2F2C095E5B6529F12=1F25151B6E78F55A9C1105965CD92878 -eclipse.preferences.version=1 diff --git a/workspace/stm32f407_default/Core/Inc/main.h b/workspace/stm32f407_default/Core/Inc/main.h deleted file mode 100644 index 39a8eb5..0000000 --- a/workspace/stm32f407_default/Core/Inc/main.h +++ /dev/null @@ -1,135 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.h - * @brief : Header for main.c file. - * This file contains the common defines of the application. - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void Error_Handler(void); - -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -/* Private defines -----------------------------------------------------------*/ -#define CS_I2C_SPI_Pin GPIO_PIN_3 -#define CS_I2C_SPI_GPIO_Port GPIOE -#define PC14_OSC32_IN_Pin GPIO_PIN_14 -#define PC14_OSC32_IN_GPIO_Port GPIOC -#define PC15_OSC32_OUT_Pin GPIO_PIN_15 -#define PC15_OSC32_OUT_GPIO_Port GPIOC -#define PH0_OSC_IN_Pin GPIO_PIN_0 -#define PH0_OSC_IN_GPIO_Port GPIOH -#define PH1_OSC_OUT_Pin GPIO_PIN_1 -#define PH1_OSC_OUT_GPIO_Port GPIOH -#define OTG_FS_PowerSwitchOn_Pin GPIO_PIN_0 -#define OTG_FS_PowerSwitchOn_GPIO_Port GPIOC -#define PDM_OUT_Pin GPIO_PIN_3 -#define PDM_OUT_GPIO_Port GPIOC -#define B1_Pin GPIO_PIN_0 -#define B1_GPIO_Port GPIOA -#define I2S3_WS_Pin GPIO_PIN_4 -#define I2S3_WS_GPIO_Port GPIOA -#define SPI1_SCK_Pin GPIO_PIN_5 -#define SPI1_SCK_GPIO_Port GPIOA -#define SPI1_MISO_Pin GPIO_PIN_6 -#define SPI1_MISO_GPIO_Port GPIOA -#define SPI1_MOSI_Pin GPIO_PIN_7 -#define SPI1_MOSI_GPIO_Port GPIOA -#define BOOT1_Pin GPIO_PIN_2 -#define BOOT1_GPIO_Port GPIOB -#define CLK_IN_Pin GPIO_PIN_10 -#define CLK_IN_GPIO_Port GPIOB -#define LD4_Pin GPIO_PIN_12 -#define LD4_GPIO_Port GPIOD -#define LD3_Pin GPIO_PIN_13 -#define LD3_GPIO_Port GPIOD -#define LD5_Pin GPIO_PIN_14 -#define LD5_GPIO_Port GPIOD -#define LD6_Pin GPIO_PIN_15 -#define LD6_GPIO_Port GPIOD -#define I2S3_MCK_Pin GPIO_PIN_7 -#define I2S3_MCK_GPIO_Port GPIOC -#define VBUS_FS_Pin GPIO_PIN_9 -#define VBUS_FS_GPIO_Port GPIOA -#define OTG_FS_ID_Pin GPIO_PIN_10 -#define OTG_FS_ID_GPIO_Port GPIOA -#define OTG_FS_DM_Pin GPIO_PIN_11 -#define OTG_FS_DM_GPIO_Port GPIOA -#define OTG_FS_DP_Pin GPIO_PIN_12 -#define OTG_FS_DP_GPIO_Port GPIOA -#define SWDIO_Pin GPIO_PIN_13 -#define SWDIO_GPIO_Port GPIOA -#define SWCLK_Pin GPIO_PIN_14 -#define SWCLK_GPIO_Port GPIOA -#define I2S3_SCK_Pin GPIO_PIN_10 -#define I2S3_SCK_GPIO_Port GPIOC -#define I2S3_SD_Pin GPIO_PIN_12 -#define I2S3_SD_GPIO_Port GPIOC -#define Audio_RST_Pin GPIO_PIN_4 -#define Audio_RST_GPIO_Port GPIOD -#define OTG_FS_OverCurrent_Pin GPIO_PIN_5 -#define OTG_FS_OverCurrent_GPIO_Port GPIOD -#define SWO_Pin GPIO_PIN_3 -#define SWO_GPIO_Port GPIOB -#define Audio_SCL_Pin GPIO_PIN_6 -#define Audio_SCL_GPIO_Port GPIOB -#define Audio_SDA_Pin GPIO_PIN_9 -#define Audio_SDA_GPIO_Port GPIOB -#define MEMS_INT2_Pin GPIO_PIN_1 -#define MEMS_INT2_GPIO_Port GPIOE - -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -#ifdef __cplusplus -} -#endif - -#endif /* __MAIN_H */ diff --git a/workspace/stm32f407_default/Core/Inc/stm32f4xx_hal_conf.h b/workspace/stm32f407_default/Core/Inc/stm32f4xx_hal_conf.h deleted file mode 100644 index 471b499..0000000 --- a/workspace/stm32f407_default/Core/Inc/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,495 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32f4xx_hal_conf.h. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - - /* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_ETH_LEGACY_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_I2C_MODULE_ENABLED -#define HAL_I2S_MODULE_ENABLED -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -#define HAL_HCD_MODULE_ENABLED -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_FMPSMBUS_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External audio frequency in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS 0U /* FMPSMBUS register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_ETH_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_eth_legacy.h" -#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_FMPSMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_fmpsmbus.h" -#endif /* HAL_FMPSMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ diff --git a/workspace/stm32f407_default/Core/Inc/stm32f4xx_it.h b/workspace/stm32f407_default/Core/Inc/stm32f4xx_it.h deleted file mode 100644 index 792bfdb..0000000 --- a/workspace/stm32f407_default/Core/Inc/stm32f4xx_it.h +++ /dev/null @@ -1,67 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f4xx_it.h - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_IT_H -#define __STM32F4xx_IT_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -void OTG_FS_IRQHandler(void); -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_IT_H */ diff --git a/workspace/stm32f407_default/Core/Src/main.c b/workspace/stm32f407_default/Core/Src/main.c deleted file mode 100644 index 9229cd4..0000000 --- a/workspace/stm32f407_default/Core/Src/main.c +++ /dev/null @@ -1,400 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.c - * @brief : Main program body - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "usb_host.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN PTD */ - -/* USER CODE END PTD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ - -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ -I2C_HandleTypeDef hi2c1; - -I2S_HandleTypeDef hi2s3; - -SPI_HandleTypeDef hspi1; - -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -void SystemClock_Config(void); -static void MX_GPIO_Init(void); -static void MX_I2C1_Init(void); -static void MX_I2S3_Init(void); -static void MX_SPI1_Init(void); -void MX_USB_HOST_Process(void); - -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/** - * @brief The application entry point. - * @retval int - */ -int main(void) -{ - /* USER CODE BEGIN 1 */ - - /* USER CODE END 1 */ - - /* MCU Configuration--------------------------------------------------------*/ - - /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ - HAL_Init(); - - /* USER CODE BEGIN Init */ - - /* USER CODE END Init */ - - /* Configure the system clock */ - SystemClock_Config(); - - /* USER CODE BEGIN SysInit */ - - /* USER CODE END SysInit */ - - /* Initialize all configured peripherals */ - MX_GPIO_Init(); - MX_I2C1_Init(); - MX_I2S3_Init(); - MX_SPI1_Init(); - MX_USB_HOST_Init(); - /* USER CODE BEGIN 2 */ - - /* USER CODE END 2 */ - - /* Infinite loop */ - /* USER CODE BEGIN WHILE */ - while (1) - { - /* USER CODE END WHILE */ - MX_USB_HOST_Process(); - - /* USER CODE BEGIN 3 */ - } - /* USER CODE END 3 */ -} - -/** - * @brief System Clock Configuration - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - - /** Configure the main internal regulator output voltage - */ - __HAL_RCC_PWR_CLK_ENABLE(); - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /** Initializes the RCC Oscillators according to the specified parameters - * in the RCC_OscInitTypeDef structure. - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = 8; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 7; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) - { - Error_Handler(); - } - - /** Initializes the CPU, AHB and APB buses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) - { - Error_Handler(); - } -} - -/** - * @brief I2C1 Initialization Function - * @param None - * @retval None - */ -static void MX_I2C1_Init(void) -{ - - /* USER CODE BEGIN I2C1_Init 0 */ - - /* USER CODE END I2C1_Init 0 */ - - /* USER CODE BEGIN I2C1_Init 1 */ - - /* USER CODE END I2C1_Init 1 */ - hi2c1.Instance = I2C1; - hi2c1.Init.ClockSpeed = 100000; - hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2; - hi2c1.Init.OwnAddress1 = 0; - hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; - hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; - hi2c1.Init.OwnAddress2 = 0; - hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; - hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; - if (HAL_I2C_Init(&hi2c1) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN I2C1_Init 2 */ - - /* USER CODE END I2C1_Init 2 */ - -} - -/** - * @brief I2S3 Initialization Function - * @param None - * @retval None - */ -static void MX_I2S3_Init(void) -{ - - /* USER CODE BEGIN I2S3_Init 0 */ - - /* USER CODE END I2S3_Init 0 */ - - /* USER CODE BEGIN I2S3_Init 1 */ - - /* USER CODE END I2S3_Init 1 */ - hi2s3.Instance = SPI3; - hi2s3.Init.Mode = I2S_MODE_MASTER_TX; - hi2s3.Init.Standard = I2S_STANDARD_PHILIPS; - hi2s3.Init.DataFormat = I2S_DATAFORMAT_16B; - hi2s3.Init.MCLKOutput = I2S_MCLKOUTPUT_ENABLE; - hi2s3.Init.AudioFreq = I2S_AUDIOFREQ_96K; - hi2s3.Init.CPOL = I2S_CPOL_LOW; - hi2s3.Init.ClockSource = I2S_CLOCK_PLL; - hi2s3.Init.FullDuplexMode = I2S_FULLDUPLEXMODE_DISABLE; - if (HAL_I2S_Init(&hi2s3) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN I2S3_Init 2 */ - - /* USER CODE END I2S3_Init 2 */ - -} - -/** - * @brief SPI1 Initialization Function - * @param None - * @retval None - */ -static void MX_SPI1_Init(void) -{ - - /* USER CODE BEGIN SPI1_Init 0 */ - - /* USER CODE END SPI1_Init 0 */ - - /* USER CODE BEGIN SPI1_Init 1 */ - - /* USER CODE END SPI1_Init 1 */ - /* SPI1 parameter configuration*/ - hspi1.Instance = SPI1; - hspi1.Init.Mode = SPI_MODE_MASTER; - hspi1.Init.Direction = SPI_DIRECTION_2LINES; - hspi1.Init.DataSize = SPI_DATASIZE_8BIT; - hspi1.Init.CLKPolarity = SPI_POLARITY_LOW; - hspi1.Init.CLKPhase = SPI_PHASE_1EDGE; - hspi1.Init.NSS = SPI_NSS_SOFT; - hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; - hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB; - hspi1.Init.TIMode = SPI_TIMODE_DISABLE; - hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; - hspi1.Init.CRCPolynomial = 10; - if (HAL_SPI_Init(&hspi1) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN SPI1_Init 2 */ - - /* USER CODE END SPI1_Init 2 */ - -} - -/** - * @brief GPIO Initialization Function - * @param None - * @retval None - */ -static void MX_GPIO_Init(void) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; -/* USER CODE BEGIN MX_GPIO_Init_1 */ -/* USER CODE END MX_GPIO_Init_1 */ - - /* GPIO Ports Clock Enable */ - __HAL_RCC_GPIOE_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOH_CLK_ENABLE(); - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(CS_I2C_SPI_GPIO_Port, CS_I2C_SPI_Pin, GPIO_PIN_RESET); - - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(OTG_FS_PowerSwitchOn_GPIO_Port, OTG_FS_PowerSwitchOn_Pin, GPIO_PIN_SET); - - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(GPIOD, LD4_Pin|LD3_Pin|LD5_Pin|LD6_Pin - |Audio_RST_Pin, GPIO_PIN_RESET); - - /*Configure GPIO pin : CS_I2C_SPI_Pin */ - GPIO_InitStruct.Pin = CS_I2C_SPI_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(CS_I2C_SPI_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pin : OTG_FS_PowerSwitchOn_Pin */ - GPIO_InitStruct.Pin = OTG_FS_PowerSwitchOn_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(OTG_FS_PowerSwitchOn_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pin : PDM_OUT_Pin */ - GPIO_InitStruct.Pin = PDM_OUT_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF5_SPI2; - HAL_GPIO_Init(PDM_OUT_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pin : B1_Pin */ - GPIO_InitStruct.Pin = B1_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_EVT_RISING; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pin : BOOT1_Pin */ - GPIO_InitStruct.Pin = BOOT1_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(BOOT1_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pin : CLK_IN_Pin */ - GPIO_InitStruct.Pin = CLK_IN_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF5_SPI2; - HAL_GPIO_Init(CLK_IN_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pins : LD4_Pin LD3_Pin LD5_Pin LD6_Pin - Audio_RST_Pin */ - GPIO_InitStruct.Pin = LD4_Pin|LD3_Pin|LD5_Pin|LD6_Pin - |Audio_RST_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); - - /*Configure GPIO pin : OTG_FS_OverCurrent_Pin */ - GPIO_InitStruct.Pin = OTG_FS_OverCurrent_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(OTG_FS_OverCurrent_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pin : MEMS_INT2_Pin */ - GPIO_InitStruct.Pin = MEMS_INT2_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_EVT_RISING; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(MEMS_INT2_GPIO_Port, &GPIO_InitStruct); - -/* USER CODE BEGIN MX_GPIO_Init_2 */ -/* USER CODE END MX_GPIO_Init_2 */ -} - -/* USER CODE BEGIN 4 */ - -/* USER CODE END 4 */ - -/** - * @brief This function is executed in case of error occurrence. - * @retval None - */ -void Error_Handler(void) -{ - /* USER CODE BEGIN Error_Handler_Debug */ - /* User can add his own implementation to report the HAL error return state */ - __disable_irq(); - while (1) - { - } - /* USER CODE END Error_Handler_Debug */ -} - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t *file, uint32_t line) -{ - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ diff --git a/workspace/stm32f407_default/Core/Src/stm32f4xx_hal_msp.c b/workspace/stm32f407_default/Core/Src/stm32f4xx_hal_msp.c deleted file mode 100644 index 819a635..0000000 --- a/workspace/stm32f407_default/Core/Src/stm32f4xx_hal_msp.c +++ /dev/null @@ -1,308 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f4xx_hal_msp.c - * @brief This file provides code for the MSP Initialization - * and de-Initialization codes. - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN Define */ - -/* USER CODE END Define */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN Macro */ - -/* USER CODE END Macro */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* External functions --------------------------------------------------------*/ -/* USER CODE BEGIN ExternalFunctions */ - -/* USER CODE END ExternalFunctions */ - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ -/** - * Initializes the Global MSP. - */ -void HAL_MspInit(void) -{ - /* USER CODE BEGIN MspInit 0 */ - - /* USER CODE END MspInit 0 */ - - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_RCC_PWR_CLK_ENABLE(); - - HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0); - - /* System interrupt init*/ - - /* USER CODE BEGIN MspInit 1 */ - - /* USER CODE END MspInit 1 */ -} - -/** -* @brief I2C MSP Initialization -* This function configures the hardware resources used in this example -* @param hi2c: I2C handle pointer -* @retval None -*/ -void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(hi2c->Instance==I2C1) - { - /* USER CODE BEGIN I2C1_MspInit 0 */ - - /* USER CODE END I2C1_MspInit 0 */ - - __HAL_RCC_GPIOB_CLK_ENABLE(); - /**I2C1 GPIO Configuration - PB6 ------> I2C1_SCL - PB9 ------> I2C1_SDA - */ - GPIO_InitStruct.Pin = Audio_SCL_Pin|Audio_SDA_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - /* Peripheral clock enable */ - __HAL_RCC_I2C1_CLK_ENABLE(); - /* USER CODE BEGIN I2C1_MspInit 1 */ - - /* USER CODE END I2C1_MspInit 1 */ - } - -} - -/** -* @brief I2C MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param hi2c: I2C handle pointer -* @retval None -*/ -void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c) -{ - if(hi2c->Instance==I2C1) - { - /* USER CODE BEGIN I2C1_MspDeInit 0 */ - - /* USER CODE END I2C1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_I2C1_CLK_DISABLE(); - - /**I2C1 GPIO Configuration - PB6 ------> I2C1_SCL - PB9 ------> I2C1_SDA - */ - HAL_GPIO_DeInit(Audio_SCL_GPIO_Port, Audio_SCL_Pin); - - HAL_GPIO_DeInit(Audio_SDA_GPIO_Port, Audio_SDA_Pin); - - /* USER CODE BEGIN I2C1_MspDeInit 1 */ - - /* USER CODE END I2C1_MspDeInit 1 */ - } - -} - -/** -* @brief I2S MSP Initialization -* This function configures the hardware resources used in this example -* @param hi2s: I2S handle pointer -* @retval None -*/ -void HAL_I2S_MspInit(I2S_HandleTypeDef* hi2s) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; - if(hi2s->Instance==SPI3) - { - /* USER CODE BEGIN SPI3_MspInit 0 */ - - /* USER CODE END SPI3_MspInit 0 */ - - /** Initializes the peripherals clock - */ - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S; - PeriphClkInitStruct.PLLI2S.PLLI2SN = 192; - PeriphClkInitStruct.PLLI2S.PLLI2SR = 2; - if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) - { - Error_Handler(); - } - - /* Peripheral clock enable */ - __HAL_RCC_SPI3_CLK_ENABLE(); - - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - /**I2S3 GPIO Configuration - PA4 ------> I2S3_WS - PC7 ------> I2S3_MCK - PC10 ------> I2S3_CK - PC12 ------> I2S3_SD - */ - GPIO_InitStruct.Pin = I2S3_WS_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF6_SPI3; - HAL_GPIO_Init(I2S3_WS_GPIO_Port, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = I2S3_MCK_Pin|I2S3_SCK_Pin|I2S3_SD_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF6_SPI3; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - /* USER CODE BEGIN SPI3_MspInit 1 */ - - /* USER CODE END SPI3_MspInit 1 */ - } - -} - -/** -* @brief I2S MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param hi2s: I2S handle pointer -* @retval None -*/ -void HAL_I2S_MspDeInit(I2S_HandleTypeDef* hi2s) -{ - if(hi2s->Instance==SPI3) - { - /* USER CODE BEGIN SPI3_MspDeInit 0 */ - - /* USER CODE END SPI3_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_SPI3_CLK_DISABLE(); - - /**I2S3 GPIO Configuration - PA4 ------> I2S3_WS - PC7 ------> I2S3_MCK - PC10 ------> I2S3_CK - PC12 ------> I2S3_SD - */ - HAL_GPIO_DeInit(I2S3_WS_GPIO_Port, I2S3_WS_Pin); - - HAL_GPIO_DeInit(GPIOC, I2S3_MCK_Pin|I2S3_SCK_Pin|I2S3_SD_Pin); - - /* USER CODE BEGIN SPI3_MspDeInit 1 */ - - /* USER CODE END SPI3_MspDeInit 1 */ - } - -} - -/** -* @brief SPI MSP Initialization -* This function configures the hardware resources used in this example -* @param hspi: SPI handle pointer -* @retval None -*/ -void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(hspi->Instance==SPI1) - { - /* USER CODE BEGIN SPI1_MspInit 0 */ - - /* USER CODE END SPI1_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_SPI1_CLK_ENABLE(); - - __HAL_RCC_GPIOA_CLK_ENABLE(); - /**SPI1 GPIO Configuration - PA5 ------> SPI1_SCK - PA6 ------> SPI1_MISO - PA7 ------> SPI1_MOSI - */ - GPIO_InitStruct.Pin = SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF5_SPI1; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* USER CODE BEGIN SPI1_MspInit 1 */ - - /* USER CODE END SPI1_MspInit 1 */ - } - -} - -/** -* @brief SPI MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param hspi: SPI handle pointer -* @retval None -*/ -void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi) -{ - if(hspi->Instance==SPI1) - { - /* USER CODE BEGIN SPI1_MspDeInit 0 */ - - /* USER CODE END SPI1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_SPI1_CLK_DISABLE(); - - /**SPI1 GPIO Configuration - PA5 ------> SPI1_SCK - PA6 ------> SPI1_MISO - PA7 ------> SPI1_MOSI - */ - HAL_GPIO_DeInit(GPIOA, SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin); - - /* USER CODE BEGIN SPI1_MspDeInit 1 */ - - /* USER CODE END SPI1_MspDeInit 1 */ - } - -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ diff --git a/workspace/stm32f407_default/Core/Src/stm32f4xx_it.c b/workspace/stm32f407_default/Core/Src/stm32f4xx_it.c deleted file mode 100644 index 396da20..0000000 --- a/workspace/stm32f407_default/Core/Src/stm32f4xx_it.c +++ /dev/null @@ -1,217 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f4xx_it.c - * @brief Interrupt Service Routines. - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "stm32f4xx_it.h" -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ - -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/* External variables --------------------------------------------------------*/ -extern HCD_HandleTypeDef hhcd_USB_OTG_FS; -/* USER CODE BEGIN EV */ - -/* USER CODE END EV */ - -/******************************************************************************/ -/* Cortex-M4 Processor Interruption and Exception Handlers */ -/******************************************************************************/ -/** - * @brief This function handles Non maskable interrupt. - */ -void NMI_Handler(void) -{ - /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ - - /* USER CODE END NonMaskableInt_IRQn 0 */ - /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ - while (1) - { - } - /* USER CODE END NonMaskableInt_IRQn 1 */ -} - -/** - * @brief This function handles Hard fault interrupt. - */ -void HardFault_Handler(void) -{ - /* USER CODE BEGIN HardFault_IRQn 0 */ - - /* USER CODE END HardFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_HardFault_IRQn 0 */ - /* USER CODE END W1_HardFault_IRQn 0 */ - } -} - -/** - * @brief This function handles Memory management fault. - */ -void MemManage_Handler(void) -{ - /* USER CODE BEGIN MemoryManagement_IRQn 0 */ - - /* USER CODE END MemoryManagement_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ - /* USER CODE END W1_MemoryManagement_IRQn 0 */ - } -} - -/** - * @brief This function handles Pre-fetch fault, memory access fault. - */ -void BusFault_Handler(void) -{ - /* USER CODE BEGIN BusFault_IRQn 0 */ - - /* USER CODE END BusFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_BusFault_IRQn 0 */ - /* USER CODE END W1_BusFault_IRQn 0 */ - } -} - -/** - * @brief This function handles Undefined instruction or illegal state. - */ -void UsageFault_Handler(void) -{ - /* USER CODE BEGIN UsageFault_IRQn 0 */ - - /* USER CODE END UsageFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ - /* USER CODE END W1_UsageFault_IRQn 0 */ - } -} - -/** - * @brief This function handles System service call via SWI instruction. - */ -void SVC_Handler(void) -{ - /* USER CODE BEGIN SVCall_IRQn 0 */ - - /* USER CODE END SVCall_IRQn 0 */ - /* USER CODE BEGIN SVCall_IRQn 1 */ - - /* USER CODE END SVCall_IRQn 1 */ -} - -/** - * @brief This function handles Debug monitor. - */ -void DebugMon_Handler(void) -{ - /* USER CODE BEGIN DebugMonitor_IRQn 0 */ - - /* USER CODE END DebugMonitor_IRQn 0 */ - /* USER CODE BEGIN DebugMonitor_IRQn 1 */ - - /* USER CODE END DebugMonitor_IRQn 1 */ -} - -/** - * @brief This function handles Pendable request for system service. - */ -void PendSV_Handler(void) -{ - /* USER CODE BEGIN PendSV_IRQn 0 */ - - /* USER CODE END PendSV_IRQn 0 */ - /* USER CODE BEGIN PendSV_IRQn 1 */ - - /* USER CODE END PendSV_IRQn 1 */ -} - -/** - * @brief This function handles System tick timer. - */ -void SysTick_Handler(void) -{ - /* USER CODE BEGIN SysTick_IRQn 0 */ - - /* USER CODE END SysTick_IRQn 0 */ - HAL_IncTick(); - /* USER CODE BEGIN SysTick_IRQn 1 */ - - /* USER CODE END SysTick_IRQn 1 */ -} - -/******************************************************************************/ -/* STM32F4xx Peripheral Interrupt Handlers */ -/* Add here the Interrupt Handlers for the used peripherals. */ -/* For the available peripheral interrupt handler names, */ -/* please refer to the startup file (startup_stm32f4xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles USB On The Go FS global interrupt. - */ -void OTG_FS_IRQHandler(void) -{ - /* USER CODE BEGIN OTG_FS_IRQn 0 */ - - /* USER CODE END OTG_FS_IRQn 0 */ - HAL_HCD_IRQHandler(&hhcd_USB_OTG_FS); - /* USER CODE BEGIN OTG_FS_IRQn 1 */ - - /* USER CODE END OTG_FS_IRQn 1 */ -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ diff --git a/workspace/stm32f407_default/Core/Src/syscalls.c b/workspace/stm32f407_default/Core/Src/syscalls.c deleted file mode 100644 index d190edf..0000000 --- a/workspace/stm32f407_default/Core/Src/syscalls.c +++ /dev/null @@ -1,176 +0,0 @@ -/** - ****************************************************************************** - * @file syscalls.c - * @author Auto-generated by STM32CubeIDE - * @brief STM32CubeIDE Minimal System calls file - * - * For more information about which c-functions - * need which of these lowlevel functions - * please consult the Newlib libc-manual - ****************************************************************************** - * @attention - * - * Copyright (c) 2020-2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes */ -#include -#include -#include -#include -#include -#include -#include -#include - - -/* Variables */ -extern int __io_putchar(int ch) __attribute__((weak)); -extern int __io_getchar(void) __attribute__((weak)); - - -char *__env[1] = { 0 }; -char **environ = __env; - - -/* Functions */ -void initialise_monitor_handles() -{ -} - -int _getpid(void) -{ - return 1; -} - -int _kill(int pid, int sig) -{ - (void)pid; - (void)sig; - errno = EINVAL; - return -1; -} - -void _exit (int status) -{ - _kill(status, -1); - while (1) {} /* Make sure we hang here */ -} - -__attribute__((weak)) int _read(int file, char *ptr, int len) -{ - (void)file; - int DataIdx; - - for (DataIdx = 0; DataIdx < len; DataIdx++) - { - *ptr++ = __io_getchar(); - } - - return len; -} - -__attribute__((weak)) int _write(int file, char *ptr, int len) -{ - (void)file; - int DataIdx; - - for (DataIdx = 0; DataIdx < len; DataIdx++) - { - __io_putchar(*ptr++); - } - return len; -} - -int _close(int file) -{ - (void)file; - return -1; -} - - -int _fstat(int file, struct stat *st) -{ - (void)file; - st->st_mode = S_IFCHR; - return 0; -} - -int _isatty(int file) -{ - (void)file; - return 1; -} - -int _lseek(int file, int ptr, int dir) -{ - (void)file; - (void)ptr; - (void)dir; - return 0; -} - -int _open(char *path, int flags, ...) -{ - (void)path; - (void)flags; - /* Pretend like we always fail */ - return -1; -} - -int _wait(int *status) -{ - (void)status; - errno = ECHILD; - return -1; -} - -int _unlink(char *name) -{ - (void)name; - errno = ENOENT; - return -1; -} - -int _times(struct tms *buf) -{ - (void)buf; - return -1; -} - -int _stat(char *file, struct stat *st) -{ - (void)file; - st->st_mode = S_IFCHR; - return 0; -} - -int _link(char *old, char *new) -{ - (void)old; - (void)new; - errno = EMLINK; - return -1; -} - -int _fork(void) -{ - errno = EAGAIN; - return -1; -} - -int _execve(char *name, char **argv, char **env) -{ - (void)name; - (void)argv; - (void)env; - errno = ENOMEM; - return -1; -} diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h deleted file mode 100644 index 934f1f9..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ /dev/null @@ -1,4014 +0,0 @@ -/** - ****************************************************************************** - * @file stm32_hal_legacy.h - * @author MCD Application Team - * @brief This file contains aliases definition for the STM32Cube HAL constants - * macros and functions maintained for legacy purpose. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32_HAL_LEGACY -#define STM32_HAL_LEGACY - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose - * @{ - */ -#define AES_FLAG_RDERR CRYP_FLAG_RDERR -#define AES_FLAG_WRERR CRYP_FLAG_WRERR -#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF -#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR -#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR -#if defined(STM32U5) || defined(STM32H7) || defined(STM32MP1) -#define CRYP_DATATYPE_32B CRYP_NO_SWAP -#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP -#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP -#define CRYP_DATATYPE_1B CRYP_BIT_SWAP -#if defined(STM32U5) -#define CRYP_CCF_CLEAR CRYP_CLEAR_CCF -#define CRYP_ERR_CLEAR CRYP_CLEAR_RWEIF -#endif /* STM32U5 */ -#endif /* STM32U5 || STM32H7 || STM32MP1 */ -/** - * @} - */ - -/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose - * @{ - */ -#define ADC_RESOLUTION12b ADC_RESOLUTION_12B -#define ADC_RESOLUTION10b ADC_RESOLUTION_10B -#define ADC_RESOLUTION8b ADC_RESOLUTION_8B -#define ADC_RESOLUTION6b ADC_RESOLUTION_6B -#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN -#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED -#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV -#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV -#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV -#define REGULAR_GROUP ADC_REGULAR_GROUP -#define INJECTED_GROUP ADC_INJECTED_GROUP -#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP -#define AWD_EVENT ADC_AWD_EVENT -#define AWD1_EVENT ADC_AWD1_EVENT -#define AWD2_EVENT ADC_AWD2_EVENT -#define AWD3_EVENT ADC_AWD3_EVENT -#define OVR_EVENT ADC_OVR_EVENT -#define JQOVF_EVENT ADC_JQOVF_EVENT -#define ALL_CHANNELS ADC_ALL_CHANNELS -#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS -#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS -#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR -#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT -#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 -#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 -#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 -#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 -#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 -#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO -#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 -#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO -#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 -#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO -#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 -#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 -#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE -#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING -#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING -#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING -#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 - -#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY -#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY -#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC -#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC -#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL -#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL -#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 - -#if defined(STM32H7) -#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT -#endif /* STM32H7 */ - -#if defined(STM32U5) -#define ADC_SAMPLETIME_5CYCLE ADC_SAMPLETIME_5CYCLES -#define ADC_SAMPLETIME_391CYCLES_5 ADC_SAMPLETIME_391CYCLES -#define ADC4_SAMPLETIME_160CYCLES_5 ADC4_SAMPLETIME_814CYCLES_5 -#endif /* STM32U5 */ - -/** - * @} - */ - -/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG - -/** - * @} - */ - -/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose - * @{ - */ -#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE -#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE -#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 -#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 -#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 -#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 -#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 -#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 -#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 -#if defined(STM32L0) -#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ -#endif -#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR -#if defined(STM32F373xC) || defined(STM32F378xx) -#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 -#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR -#endif /* STM32F373xC || STM32F378xx */ - -#if defined(STM32L0) || defined(STM32L4) -#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON - -#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 -#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 -#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 -#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 -#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 -#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 - -#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT -#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT -#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT -#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT -#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 -#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 -#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 -#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 -#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 -#if defined(STM32L0) -/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ -/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ -/* to the second dedicated IO (only for COMP2). */ -#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 -#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 -#else -#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 -#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 -#endif -#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 -#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 - -#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW -#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH - -/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ -/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ -#if defined(COMP_CSR_LOCK) -#define COMP_FLAG_LOCK COMP_CSR_LOCK -#elif defined(COMP_CSR_COMP1LOCK) -#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK -#elif defined(COMP_CSR_COMPxLOCK) -#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK -#endif - -#if defined(STM32L4) -#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 -#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 -#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 -#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 -#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 -#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 -#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE -#endif - -#if defined(STM32L0) -#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED -#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER -#else -#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED -#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED -#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER -#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER -#endif - -#endif -/** - * @} - */ - -/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose - * @{ - */ -#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig -#if defined(STM32U5) -#define MPU_DEVICE_nGnRnE MPU_DEVICE_NGNRNE -#define MPU_DEVICE_nGnRE MPU_DEVICE_NGNRE -#define MPU_DEVICE_nGRE MPU_DEVICE_NGRE -#endif /* STM32U5 */ -/** - * @} - */ - -/** @defgroup CRC_Aliases CRC API aliases - * @{ - */ -#if defined(STM32C0) -#else -#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */ -#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */ -#endif -/** - * @} - */ - -/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE -#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE - -/** - * @} - */ - -/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define DAC1_CHANNEL_1 DAC_CHANNEL_1 -#define DAC1_CHANNEL_2 DAC_CHANNEL_2 -#define DAC2_CHANNEL_1 DAC_CHANNEL_1 -#define DAC_WAVE_NONE 0x00000000U -#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 -#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 -#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE -#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE -#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE - -#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5) -#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL -#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL -#endif - -#if defined(STM32U5) -#define DAC_TRIGGER_STOP_LPTIM1_OUT DAC_TRIGGER_STOP_LPTIM1_CH1 -#define DAC_TRIGGER_STOP_LPTIM3_OUT DAC_TRIGGER_STOP_LPTIM3_CH1 -#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 -#define DAC_TRIGGER_LPTIM3_OUT DAC_TRIGGER_LPTIM3_CH1 -#endif - -#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) -#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID -#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID -#endif - -/** - * @} - */ - -/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 -#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 -#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 -#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 -#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 -#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 -#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 -#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 -#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 -#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 -#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 -#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 -#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 -#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 - -#define IS_HAL_REMAPDMA IS_DMA_REMAP -#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE -#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE - -#if defined(STM32L4) - -#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT -#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE -#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT -#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT -#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT - -#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT -#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING -#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING -#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING - -#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI -#endif - -#endif /* STM32L4 */ - -#if defined(STM32G0) -#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 -#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 -#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM -#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM - -#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM -#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM -#endif - -#if defined(STM32H7) - -#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 -#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 - -#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX -#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX - -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT -#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 -#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO - -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT -#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT -#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT -#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 -#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 -#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT -#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT -#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT -#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT -#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT -#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT -#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT -#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT - -#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT -#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING -#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING -#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING - -#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT -#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT -#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT - -#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT -#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT - -#endif /* STM32H7 */ - -#if defined(STM32U5) -#define GPDMA1_REQUEST_DCMI GPDMA1_REQUEST_DCMI_PSSI -#endif /* STM32U5 */ -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose - * @{ - */ - -#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE -#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD -#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD -#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD -#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS -#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES -#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES -#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE -#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE -#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE -#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE -#define OBEX_PCROP OPTIONBYTE_PCROP -#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG -#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE -#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE -#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE -#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD -#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD -#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE -#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD -#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD -#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE -#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD -#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD -#define PAGESIZE FLASH_PAGE_SIZE -#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE -#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD -#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD -#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 -#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 -#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 -#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 -#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST -#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST -#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA -#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB -#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA -#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB -#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE -#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN -#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE -#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN -#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE -#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD -#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG -#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS -#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP -#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV -#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR -#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG -#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION -#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA -#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE -#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE -#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS -#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS -#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST -#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR -#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO -#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION -#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS -#define OB_WDG_SW OB_IWDG_SW -#define OB_WDG_HW OB_IWDG_HW -#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET -#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET -#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET -#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET -#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR -#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 -#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 -#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 -#if defined(STM32G0) || defined(STM32C0) -#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE -#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH -#else -#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE -#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE -#endif -#if defined(STM32H7) -#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 -#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 -#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 -#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 -#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 -#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 -#define FLASH_FLAG_WDW FLASH_FLAG_WBNE -#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL -#endif /* STM32H7 */ -#if defined(STM32U5) -#define OB_USER_nRST_STOP OB_USER_NRST_STOP -#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY -#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW -#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0 -#define OB_USER_nBOOT0 OB_USER_NBOOT0 -#define OB_nBOOT0_RESET OB_NBOOT0_RESET -#define OB_nBOOT0_SET OB_NBOOT0_SET -#endif /* STM32U5 */ - -/** - * @} - */ - -/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose - * @{ - */ - -#if defined(STM32H7) -#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE -#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE -#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET -#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET -#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE -#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE -#endif /* STM32H7 */ - -/** - * @} - */ - -/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose - * @{ - */ - -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 -#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 -#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 -#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 -#if defined(STM32G4) - -#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster -#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster -#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD -#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD -#endif /* STM32G4 */ - -/** - * @} - */ - - -/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose - * @{ - */ -#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) -#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE -#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE -#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 -#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 -#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) -#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE -#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE -#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 -#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 -#endif -/** - * @} - */ - -/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef -#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef -/** - * @} - */ - -/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose - * @{ - */ -#define GET_GPIO_SOURCE GPIO_GET_INDEX -#define GET_GPIO_INDEX GPIO_GET_INDEX - -#if defined(STM32F4) -#define GPIO_AF12_SDMMC GPIO_AF12_SDIO -#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO -#endif - -#if defined(STM32F7) -#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 -#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 -#endif - -#if defined(STM32L4) -#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 -#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 -#endif - -#if defined(STM32H7) -#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 -#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 -#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 -#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 -#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 -#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 - -#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ - defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) -#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS -#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS -#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS -#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ -#endif /* STM32H7 */ - -#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 -#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 -#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 - -#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) -#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW -#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM -#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH -#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/ - -#if defined(STM32L1) -#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW -#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM -#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH -#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L1 */ - -#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) -#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW -#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM -#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH -#endif /* STM32F0 || STM32F3 || STM32F1 */ - -#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 - -#if defined(STM32U5) -#define GPIO_AF0_RTC_50Hz GPIO_AF0_RTC_50HZ -#endif /* STM32U5 */ -#if defined(STM32U5) -#define GPIO_AF0_S2DSTOP GPIO_AF0_SRDSTOP -#define GPIO_AF11_LPGPIO GPIO_AF11_LPGPIO1 -#endif /* STM32U5 */ -/** - * @} - */ - -/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose - * @{ - */ -#if defined(STM32U5) -#define GTZC_PERIPH_DCMI GTZC_PERIPH_DCMI_PSSI -#endif /* STM32U5 */ -/** - * @} - */ - -/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose - * @{ - */ -#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 -#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 - -#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER -#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER -#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD -#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD -#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER -#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER -#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE -#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE - -#if defined(STM32G4) -#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig -#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable -#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable -#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset -#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A -#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B -#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL -#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL -#endif /* STM32G4 */ - -#if defined(STM32H7) -#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 - -#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 -#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 -#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 -#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 -#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 -#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 -#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 -#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 -#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 -#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 -#endif /* STM32H7 */ - -#if defined(STM32F3) -/** @brief Constants defining available sources associated to external events. - */ -#define HRTIM_EVENTSRC_1 (0x00000000U) -#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) -#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) -#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) - -/** @brief Constants defining the DLL calibration periods (in micro seconds) - */ -#define HRTIM_CALIBRATIONRATE_7300 0x00000000U -#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) -#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) -#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) - -#endif /* STM32F3 */ -/** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose - * @{ - */ -#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE -#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE -#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE -#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE -#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE -#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE -#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE -#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE -#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) -#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX -#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX -#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX -#endif -/** - * @} - */ - -/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose - * @{ - */ -#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE -#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE - -/** - * @} - */ - -/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose - * @{ - */ -#define KR_KEY_RELOAD IWDG_KEY_RELOAD -#define KR_KEY_ENABLE IWDG_KEY_ENABLE -#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE -#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE -/** - * @} - */ - -/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose - * @{ - */ - -#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION -#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS -#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS -#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS - -#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING -#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING -#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING - -#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION -#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS - -/* The following 3 definition have also been present in a temporary version of lptim.h */ -/* They need to be renamed also to the right name, just in case */ -#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS - - -/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue -/** - * @} - */ - -#if defined(STM32U5) -#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF -#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF -#define LPTIM_CHANNEL_ALL 0x00000000U -#endif /* STM32U5 */ -/** - * @} - */ - -/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b -#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b -#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b -#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b - -#define NAND_AddressTypedef NAND_AddressTypeDef - -#define __ARRAY_ADDRESS ARRAY_ADDRESS -#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE -#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE -#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE -#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE -/** - * @} - */ - -/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose - * @{ - */ -#define NOR_StatusTypedef HAL_NOR_StatusTypeDef -#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS -#define NOR_ONGOING HAL_NOR_STATUS_ONGOING -#define NOR_ERROR HAL_NOR_STATUS_ERROR -#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT - -#define __NOR_WRITE NOR_WRITE -#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT -/** - * @} - */ - -/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose - * @{ - */ - -#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 -#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 -#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 -#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 - -#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 -#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 -#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 -#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 - -#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 -#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 - -#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 -#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 - -#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 -#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 - -#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 - -#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO -#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 -#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 - -#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) -#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID -#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID -#endif - -#if defined(STM32L4) || defined(STM32L5) -#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER -#elif defined(STM32G4) -#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED -#endif - -/** - * @} - */ - -/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose - * @{ - */ -#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS - -#if defined(STM32H7) -#define I2S_IT_TXE I2S_IT_TXP -#define I2S_IT_RXNE I2S_IT_RXP - -#define I2S_FLAG_TXE I2S_FLAG_TXP -#define I2S_FLAG_RXNE I2S_FLAG_RXP -#endif - -#if defined(STM32F7) -#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL -#endif -/** - * @} - */ - -/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose - * @{ - */ - -/* Compact Flash-ATA registers description */ -#define CF_DATA ATA_DATA -#define CF_SECTOR_COUNT ATA_SECTOR_COUNT -#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER -#define CF_CYLINDER_LOW ATA_CYLINDER_LOW -#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH -#define CF_CARD_HEAD ATA_CARD_HEAD -#define CF_STATUS_CMD ATA_STATUS_CMD -#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE -#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA - -/* Compact Flash-ATA commands */ -#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD -#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD -#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD -#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD - -#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef -#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS -#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING -#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR -#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT -/** - * @} - */ - -/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define FORMAT_BIN RTC_FORMAT_BIN -#define FORMAT_BCD RTC_FORMAT_BCD - -#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE -#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE -#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE -#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE - -#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE -#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE -#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE -#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT -#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT - -#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT -#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 -#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 -#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 - -#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE -#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 -#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 - -#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT -#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 -#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 - -#if defined(STM32F7) -#define RTC_TAMPCR_TAMPXE RTC_TAMPER_ENABLE_BITS_MASK -#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_IT_ENABLE_BITS_MASK -#endif /* STM32F7 */ - -#if defined(STM32H7) -#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X -#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT -#endif /* STM32H7 */ - -#if defined(STM32F7) || defined(STM32H7) -#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 -#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 -#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 -#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMP -#endif /* STM32F7 || STM32H7 */ - -/** - * @} - */ - - -/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose - * @{ - */ -#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE -#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE - -#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE -#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE -#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE -#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE - -#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE -#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE - -#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE -#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE -/** - * @} - */ - - -/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose - * @{ - */ -#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE -#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE -#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE -#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE -#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE -#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE -#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE -#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE -#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE -#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE -#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose - * @{ - */ -#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE -#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE - -#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE -#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE - -#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE -#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE - -#if defined(STM32H7) - -#define SPI_FLAG_TXE SPI_FLAG_TXP -#define SPI_FLAG_RXNE SPI_FLAG_RXP - -#define SPI_IT_TXE SPI_IT_TXP -#define SPI_IT_RXNE SPI_IT_RXP - -#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET -#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET -#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET -#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET - -#endif /* STM32H7 */ - -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose - * @{ - */ -#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK -#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK - -#define TIM_DMABase_CR1 TIM_DMABASE_CR1 -#define TIM_DMABase_CR2 TIM_DMABASE_CR2 -#define TIM_DMABase_SMCR TIM_DMABASE_SMCR -#define TIM_DMABase_DIER TIM_DMABASE_DIER -#define TIM_DMABase_SR TIM_DMABASE_SR -#define TIM_DMABase_EGR TIM_DMABASE_EGR -#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 -#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 -#define TIM_DMABase_CCER TIM_DMABASE_CCER -#define TIM_DMABase_CNT TIM_DMABASE_CNT -#define TIM_DMABase_PSC TIM_DMABASE_PSC -#define TIM_DMABase_ARR TIM_DMABASE_ARR -#define TIM_DMABase_RCR TIM_DMABASE_RCR -#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 -#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 -#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 -#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 -#define TIM_DMABase_BDTR TIM_DMABASE_BDTR -#define TIM_DMABase_DCR TIM_DMABASE_DCR -#define TIM_DMABase_DMAR TIM_DMABASE_DMAR -#define TIM_DMABase_OR1 TIM_DMABASE_OR1 -#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 -#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 -#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 -#define TIM_DMABase_OR2 TIM_DMABASE_OR2 -#define TIM_DMABase_OR3 TIM_DMABASE_OR3 -#define TIM_DMABase_OR TIM_DMABASE_OR - -#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE -#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 -#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 -#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 -#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 -#define TIM_EventSource_COM TIM_EVENTSOURCE_COM -#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER -#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK -#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 - -#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER -#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS -#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS -#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS -#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS -#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS -#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS -#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS -#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS -#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS -#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS -#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS -#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS -#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS -#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS -#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS -#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS -#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS - -#if defined(STM32L0) -#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO -#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO -#endif - -#if defined(STM32F3) -#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE -#endif - -#if defined(STM32H7) -#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 -#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 -#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 -#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 -#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 -#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 -#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 -#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 -#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 -#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 -#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 -#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 -#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 -#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 -#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 -#endif - -#if defined(STM32U5) || defined(STM32MP2) -#define OCREF_CLEAR_SELECT_Pos OCREF_CLEAR_SELECT_POS -#define OCREF_CLEAR_SELECT_Msk OCREF_CLEAR_SELECT_MSK -#endif -/** - * @} - */ - -/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose - * @{ - */ -#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING -#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose - * @{ - */ -#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE -#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE -#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE -#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE - -#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE -#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE - -#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 -#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 -#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 -#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 - -#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 -#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 -#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 -#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 - -#define __DIV_LPUART UART_DIV_LPUART - -#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE -#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK - -/** - * @} - */ - - -/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose - * @{ - */ - -#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE -#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE - -#define USARTNACK_ENABLED USART_NACK_ENABLE -#define USARTNACK_DISABLED USART_NACK_DISABLE -/** - * @} - */ - -/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose - * @{ - */ -#define CFR_BASE WWDG_CFR_BASE - -/** - * @} - */ - -/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose - * @{ - */ -#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 -#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 -#define CAN_IT_RQCP0 CAN_IT_TME -#define CAN_IT_RQCP1 CAN_IT_TME -#define CAN_IT_RQCP2 CAN_IT_TME -#define INAK_TIMEOUT CAN_TIMEOUT_VALUE -#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE -#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) -#define CAN_TXSTATUS_OK ((uint8_t)0x01U) -#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) - -/** - * @} - */ - -/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose - * @{ - */ - -#define VLAN_TAG ETH_VLAN_TAG -#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD -#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD -#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD -#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK -#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK -#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK -#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK - -#define ETH_MMCCR 0x00000100U -#define ETH_MMCRIR 0x00000104U -#define ETH_MMCTIR 0x00000108U -#define ETH_MMCRIMR 0x0000010CU -#define ETH_MMCTIMR 0x00000110U -#define ETH_MMCTGFSCCR 0x0000014CU -#define ETH_MMCTGFMSCCR 0x00000150U -#define ETH_MMCTGFCR 0x00000168U -#define ETH_MMCRFCECR 0x00000194U -#define ETH_MMCRFAECR 0x00000198U -#define ETH_MMCRGUFCR 0x000001C4U - -#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ -#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ -#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ -#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ -#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ -#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ -#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ -#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ -#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ -#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ -#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ -#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ -#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ -#if defined(STM32F1) -#else -#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ -#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ -#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ -#endif -#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ -#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ -#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ -#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ -#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ -#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ -#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ - -/** - * @} - */ - -/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR -#define DCMI_IT_OVF DCMI_IT_OVR -#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI -#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI - -#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop -#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop -#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop - -/** - * @} - */ - -#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ - || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ - || defined(STM32H7) -/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose - * @{ - */ -#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 -#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 -#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 -#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 -#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 - -#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 -#define CM_RGB888 DMA2D_INPUT_RGB888 -#define CM_RGB565 DMA2D_INPUT_RGB565 -#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 -#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 -#define CM_L8 DMA2D_INPUT_L8 -#define CM_AL44 DMA2D_INPUT_AL44 -#define CM_AL88 DMA2D_INPUT_AL88 -#define CM_L4 DMA2D_INPUT_L4 -#define CM_A8 DMA2D_INPUT_A8 -#define CM_A4 DMA2D_INPUT_A4 -/** - * @} - */ -#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ - -#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ - || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ - || defined(STM32H7) || defined(STM32U5) -/** @defgroup DMA2D_Aliases DMA2D API Aliases - * @{ - */ -#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort - for compatibility with legacy code */ -/** - * @} - */ - -#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */ - -/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback -/** - * @} - */ - -/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose - * @{ - */ - -#if defined(STM32U5) -#define HAL_DCACHE_CleanInvalidateByAddr HAL_DCACHE_CleanInvalidByAddr -#define HAL_DCACHE_CleanInvalidateByAddr_IT HAL_DCACHE_CleanInvalidByAddr_IT -#endif /* STM32U5 */ - -/** - * @} - */ - -#if !defined(STM32F2) -/** @defgroup HASH_alias HASH API alias - * @{ - */ -#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ -/** - * - * @} - */ -#endif /* STM32F2 */ -/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef -#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef -#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish -#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish -#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish -#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish - -/*HASH Algorithm Selection*/ - -#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 -#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 -#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 -#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 - -#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH -#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC - -#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY -#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY - -#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) - -#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt -#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End -#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT -#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT - -#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt -#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End -#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT -#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT - -#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt -#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End -#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT -#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT - -#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt -#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End -#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT -#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT - -#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ -/** - * @} - */ - -/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode -#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode -#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode -#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode -#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode -#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode -#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ - )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) -#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect -#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) -#if defined(STM32L0) -#else -#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) -#endif -#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) -#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ - )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) -#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) -#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode -#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode -#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode -#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode -#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ - -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose - * @{ - */ -#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram -#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown -#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown -#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock -#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock -#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase -#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program - -/** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter -#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter -#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter -#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter - -#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\ - )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) - -#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) -#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT -#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT -#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT -#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT -#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ -#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) -#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA -#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA -#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA -#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA -#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ - -#if defined(STM32F4) -#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT -#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT -#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT -#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT -#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA -#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA -#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA -#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA -#endif /* STM32F4 */ -/** - * @} - */ - -/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose - * @{ - */ - -#if defined(STM32G0) -#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD -#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD -#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD -#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler -#endif -#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD -#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg -#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown -#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor -#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg -#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown -#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor -#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler -#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD -#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler -#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback -#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive -#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive -#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC -#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC -#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM - -#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL -#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING -#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING -#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING -#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING -#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING -#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING - -#define CR_OFFSET_BB PWR_CR_OFFSET_BB -#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB -#define PMODE_BIT_NUMBER VOS_BIT_NUMBER -#define CR_PMODE_BB CR_VOS_BB - -#define DBP_BitNumber DBP_BIT_NUMBER -#define PVDE_BitNumber PVDE_BIT_NUMBER -#define PMODE_BitNumber PMODE_BIT_NUMBER -#define EWUP_BitNumber EWUP_BIT_NUMBER -#define FPDS_BitNumber FPDS_BIT_NUMBER -#define ODEN_BitNumber ODEN_BIT_NUMBER -#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER -#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER -#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER -#define BRE_BitNumber BRE_BIT_NUMBER - -#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL - -#if defined (STM32U5) -#define PWR_SRAM1_PAGE1_STOP_RETENTION PWR_SRAM1_PAGE1_STOP -#define PWR_SRAM1_PAGE2_STOP_RETENTION PWR_SRAM1_PAGE2_STOP -#define PWR_SRAM1_PAGE3_STOP_RETENTION PWR_SRAM1_PAGE3_STOP -#define PWR_SRAM1_PAGE4_STOP_RETENTION PWR_SRAM1_PAGE4_STOP -#define PWR_SRAM1_PAGE5_STOP_RETENTION PWR_SRAM1_PAGE5_STOP -#define PWR_SRAM1_PAGE6_STOP_RETENTION PWR_SRAM1_PAGE6_STOP -#define PWR_SRAM1_PAGE7_STOP_RETENTION PWR_SRAM1_PAGE7_STOP -#define PWR_SRAM1_PAGE8_STOP_RETENTION PWR_SRAM1_PAGE8_STOP -#define PWR_SRAM1_PAGE9_STOP_RETENTION PWR_SRAM1_PAGE9_STOP -#define PWR_SRAM1_PAGE10_STOP_RETENTION PWR_SRAM1_PAGE10_STOP -#define PWR_SRAM1_PAGE11_STOP_RETENTION PWR_SRAM1_PAGE11_STOP -#define PWR_SRAM1_PAGE12_STOP_RETENTION PWR_SRAM1_PAGE12_STOP -#define PWR_SRAM1_FULL_STOP_RETENTION PWR_SRAM1_FULL_STOP - -#define PWR_SRAM2_PAGE1_STOP_RETENTION PWR_SRAM2_PAGE1_STOP -#define PWR_SRAM2_PAGE2_STOP_RETENTION PWR_SRAM2_PAGE2_STOP -#define PWR_SRAM2_FULL_STOP_RETENTION PWR_SRAM2_FULL_STOP - -#define PWR_SRAM3_PAGE1_STOP_RETENTION PWR_SRAM3_PAGE1_STOP -#define PWR_SRAM3_PAGE2_STOP_RETENTION PWR_SRAM3_PAGE2_STOP -#define PWR_SRAM3_PAGE3_STOP_RETENTION PWR_SRAM3_PAGE3_STOP -#define PWR_SRAM3_PAGE4_STOP_RETENTION PWR_SRAM3_PAGE4_STOP -#define PWR_SRAM3_PAGE5_STOP_RETENTION PWR_SRAM3_PAGE5_STOP -#define PWR_SRAM3_PAGE6_STOP_RETENTION PWR_SRAM3_PAGE6_STOP -#define PWR_SRAM3_PAGE7_STOP_RETENTION PWR_SRAM3_PAGE7_STOP -#define PWR_SRAM3_PAGE8_STOP_RETENTION PWR_SRAM3_PAGE8_STOP -#define PWR_SRAM3_PAGE9_STOP_RETENTION PWR_SRAM3_PAGE9_STOP -#define PWR_SRAM3_PAGE10_STOP_RETENTION PWR_SRAM3_PAGE10_STOP -#define PWR_SRAM3_PAGE11_STOP_RETENTION PWR_SRAM3_PAGE11_STOP -#define PWR_SRAM3_PAGE12_STOP_RETENTION PWR_SRAM3_PAGE12_STOP -#define PWR_SRAM3_PAGE13_STOP_RETENTION PWR_SRAM3_PAGE13_STOP -#define PWR_SRAM3_FULL_STOP_RETENTION PWR_SRAM3_FULL_STOP - -#define PWR_SRAM4_FULL_STOP_RETENTION PWR_SRAM4_FULL_STOP - -#define PWR_SRAM5_PAGE1_STOP_RETENTION PWR_SRAM5_PAGE1_STOP -#define PWR_SRAM5_PAGE2_STOP_RETENTION PWR_SRAM5_PAGE2_STOP -#define PWR_SRAM5_PAGE3_STOP_RETENTION PWR_SRAM5_PAGE3_STOP -#define PWR_SRAM5_PAGE4_STOP_RETENTION PWR_SRAM5_PAGE4_STOP -#define PWR_SRAM5_PAGE5_STOP_RETENTION PWR_SRAM5_PAGE5_STOP -#define PWR_SRAM5_PAGE6_STOP_RETENTION PWR_SRAM5_PAGE6_STOP -#define PWR_SRAM5_PAGE7_STOP_RETENTION PWR_SRAM5_PAGE7_STOP -#define PWR_SRAM5_PAGE8_STOP_RETENTION PWR_SRAM5_PAGE8_STOP -#define PWR_SRAM5_PAGE9_STOP_RETENTION PWR_SRAM5_PAGE9_STOP -#define PWR_SRAM5_PAGE10_STOP_RETENTION PWR_SRAM5_PAGE10_STOP -#define PWR_SRAM5_PAGE11_STOP_RETENTION PWR_SRAM5_PAGE11_STOP -#define PWR_SRAM5_PAGE12_STOP_RETENTION PWR_SRAM5_PAGE12_STOP -#define PWR_SRAM5_PAGE13_STOP_RETENTION PWR_SRAM5_PAGE13_STOP -#define PWR_SRAM5_FULL_STOP_RETENTION PWR_SRAM5_FULL_STOP - -#define PWR_ICACHE_FULL_STOP_RETENTION PWR_ICACHE_FULL_STOP -#define PWR_DCACHE1_FULL_STOP_RETENTION PWR_DCACHE1_FULL_STOP -#define PWR_DCACHE2_FULL_STOP_RETENTION PWR_DCACHE2_FULL_STOP -#define PWR_DMA2DRAM_FULL_STOP_RETENTION PWR_DMA2DRAM_FULL_STOP -#define PWR_PERIPHRAM_FULL_STOP_RETENTION PWR_PERIPHRAM_FULL_STOP -#define PWR_PKA32RAM_FULL_STOP_RETENTION PWR_PKA32RAM_FULL_STOP -#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION PWR_GRAPHICPRAM_FULL_STOP -#define PWR_DSIRAM_FULL_STOP_RETENTION PWR_DSIRAM_FULL_STOP - -#define PWR_SRAM2_PAGE1_STANDBY_RETENTION PWR_SRAM2_PAGE1_STANDBY -#define PWR_SRAM2_PAGE2_STANDBY_RETENTION PWR_SRAM2_PAGE2_STANDBY -#define PWR_SRAM2_FULL_STANDBY_RETENTION PWR_SRAM2_FULL_STANDBY - -#define PWR_SRAM1_FULL_RUN_RETENTION PWR_SRAM1_FULL_RUN -#define PWR_SRAM2_FULL_RUN_RETENTION PWR_SRAM2_FULL_RUN -#define PWR_SRAM3_FULL_RUN_RETENTION PWR_SRAM3_FULL_RUN -#define PWR_SRAM4_FULL_RUN_RETENTION PWR_SRAM4_FULL_RUN -#define PWR_SRAM5_FULL_RUN_RETENTION PWR_SRAM5_FULL_RUN - -#define PWR_ALL_RAM_RUN_RETENTION_MASK PWR_ALL_RAM_RUN_MASK -#endif - -/** - * @} - */ - -/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT -#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback -#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt -#define HAL_TIM_DMAError TIM_DMAError -#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt -#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt -#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) -#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro -#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT -#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback -#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent -#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT -#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA -#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback -/** - * @} - */ - -/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback -#define HAL_LTDC_Relaod HAL_LTDC_Reload -#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig -#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig -/** - * @} - */ - - -/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -/* Exported macros ------------------------------------------------------------*/ - -/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose - * @{ - */ -#define AES_IT_CC CRYP_IT_CC -#define AES_IT_ERR CRYP_IT_ERR -#define AES_FLAG_CCF CRYP_FLAG_CCF -/** - * @} - */ - -/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE -#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH -#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH -#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM -#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC -#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM -#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC -#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI -#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK -#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG -#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG -#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE -#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE -#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE - -#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY -#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 -#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS -#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER -#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER - -/** - * @} - */ - - -/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __ADC_ENABLE __HAL_ADC_ENABLE -#define __ADC_DISABLE __HAL_ADC_DISABLE -#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS -#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS -#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE -#define __ADC_IS_ENABLED ADC_IS_ENABLE -#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR -#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR -#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING -#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE - -#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION -#define __HAL_ADC_JSQR_RK ADC_JSQR_RK -#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT -#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR -#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION -#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE -#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS -#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS -#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM -#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT -#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS -#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN -#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ -#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET -#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET -#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL -#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL -#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET -#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET -#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD - -#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION -#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION -#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION -#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER -#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI -#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE -#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE -#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER -#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER -#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE - -#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT -#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT -#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL -#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM -#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET -#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE -#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE -#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER - -#define __HAL_ADC_SQR1 ADC_SQR1 -#define __HAL_ADC_SMPR1 ADC_SMPR1 -#define __HAL_ADC_SMPR2 ADC_SMPR2 -#define __HAL_ADC_SQR3_RK ADC_SQR3_RK -#define __HAL_ADC_SQR2_RK ADC_SQR2_RK -#define __HAL_ADC_SQR1_RK ADC_SQR1_RK -#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS -#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS -#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV -#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection -#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq -#define __HAL_ADC_JSQR ADC_JSQR - -#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL -#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS -#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF -#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT -#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS -#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN -#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR -#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ - -/** - * @} - */ - -/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT -#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT -#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT -#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE - -/** - * @} - */ - -/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 -#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 -#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 -#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 -#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 -#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 -#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 -#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 -#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 -#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 -#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 -#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 -#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 -#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 -#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 -#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 - -#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 -#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 -#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 -#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 -#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 -#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 -#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 -#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 -#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 -#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 -#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 -#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 -#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 -#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 - - -#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 -#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 -#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 -#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 -#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 -#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 -#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC -#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC -#if defined(STM32H7) -#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 -#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 -#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 -#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 -#else -#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG -#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG -#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG -#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG -#endif /* STM32H7 */ -#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT -#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT -#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT -#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT -#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT -#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT -#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 -#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 -#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 -#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 -#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 -#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 - -/** - * @} - */ - -/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined(STM32F3) -#define COMP_START __HAL_COMP_ENABLE -#define COMP_STOP __HAL_COMP_DISABLE -#define COMP_LOCK __HAL_COMP_LOCK - -#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP6_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F302xE) || defined(STM32F302xC) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP6_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP7_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F373xC) ||defined(STM32F378xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP2_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) -# endif -#else -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP2_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) -#endif - -#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE - -#if defined(STM32L0) || defined(STM32L4) -/* Note: On these STM32 families, the only argument of this macro */ -/* is COMP_FLAG_LOCK. */ -/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ -/* argument. */ -#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) -#endif -/** - * @} - */ - -#if defined(STM32L0) || defined(STM32L4) -/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ -#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ -/** - * @} - */ -#endif - -/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ - ((WAVE) == DAC_WAVE_NOISE)|| \ - ((WAVE) == DAC_WAVE_TRIANGLE)) - -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_WRPAREA IS_OB_WRPAREA -#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM -#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM -#define IS_TYPEERASE IS_FLASH_TYPEERASE -#define IS_NBSECTORS IS_FLASH_NBSECTORS -#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE - -/** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 -#define __HAL_I2C_GENERATE_START I2C_GENERATE_START -#if defined(STM32F1) -#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE -#else -#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE -#endif /* STM32F1 */ -#define __HAL_I2C_RISE_TIME I2C_RISE_TIME -#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD -#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST -#define __HAL_I2C_SPEED I2C_SPEED -#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE -#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ -#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS -#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE -#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ -#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB -#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB -#define __HAL_I2C_FREQRANGE I2C_FREQRANGE -/** - * @} - */ - -/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE -#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT - -#if defined(STM32H7) -#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG -#endif - -/** - * @} - */ - -/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __IRDA_DISABLE __HAL_IRDA_DISABLE -#define __IRDA_ENABLE __HAL_IRDA_ENABLE - -#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE -#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION -#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE -#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION - -#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE - - -/** - * @} - */ - - -/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS -#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS -/** - * @} - */ - - -/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT -#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT -#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE - -/** - * @} - */ - - -/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose - * @{ - */ -#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD -#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX -#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX -#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX -#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX -#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L -#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H -#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM -#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES -#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX -#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT -#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION -#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET - -/** - * @} - */ - - -/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT -#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT -#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE -#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE -#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE -#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE -#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE -#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE -#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE -#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine -#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine -#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig -#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig -#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) -#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT -#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT -#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE -#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) -#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) -#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention -#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention -#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 -#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 -#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB -#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB - -#if defined (STM32F4) -#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() -#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() -#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() -#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() -#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() -#else -#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG -#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT -#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT -#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT -#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG -#endif /* STM32F4 */ -/** - * @} - */ - - -/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose - * @{ - */ - -#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI -#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI - -#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback -#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\ - )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) - -#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE -#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE -#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE -#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE -#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET -#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET -#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE -#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE -#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET -#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET -#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE -#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE -#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE -#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE -#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET -#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET -#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE -#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE -#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET -#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET -#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE -#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE -#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE -#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE -#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET -#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET -#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE -#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE -#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE -#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE -#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET -#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET -#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE -#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE -#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET -#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET -#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET -#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET -#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET -#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET -#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET -#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET -#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET -#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET -#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET -#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET -#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET -#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET -#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE -#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE -#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET -#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET -#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE -#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE -#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE -#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE -#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET -#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET -#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE -#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE -#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET -#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET -#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE -#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE -#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET -#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET -#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE -#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE -#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE -#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE -#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET -#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET -#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE -#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE -#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET -#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET -#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE -#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE -#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE -#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE -#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET -#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET -#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE -#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE -#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET -#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET -#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE -#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE -#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE -#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE -#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET -#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET -#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE -#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE -#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET -#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET -#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE -#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE -#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE -#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE -#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET -#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET -#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE -#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE -#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE -#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE -#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET -#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET -#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE -#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE -#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE -#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE -#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET -#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET -#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE -#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE -#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET -#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET -#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE -#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE -#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE -#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE -#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE -#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE -#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE -#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE -#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE -#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE -#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET -#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET -#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE -#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE -#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET -#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET -#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE -#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE -#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE -#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE -#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE -#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE -#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET -#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET -#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE -#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE -#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE -#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE -#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE -#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE -#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET -#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET -#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE -#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE -#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE -#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE -#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET -#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET -#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE -#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE -#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE -#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE -#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET -#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET -#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE -#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE -#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE -#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE -#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET -#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET -#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE -#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE -#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE -#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE -#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET -#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET -#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE -#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE -#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE -#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE -#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET -#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET -#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE -#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE -#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE -#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE -#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET -#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET -#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE -#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE -#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE -#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE -#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET -#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET -#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE -#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE -#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE -#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE -#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET -#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET -#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE -#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE -#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE -#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE -#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET -#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET -#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE -#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE -#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE -#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE -#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET -#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET -#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE -#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE -#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE -#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE -#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET -#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET -#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE -#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE -#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE -#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE -#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET -#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET -#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE -#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE -#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE -#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE -#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET -#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET -#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE -#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE -#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE -#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE -#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET -#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET -#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE -#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE -#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE -#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE -#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET -#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET -#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE -#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE -#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE -#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE -#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET -#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET -#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE -#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE -#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE -#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE -#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET -#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET -#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE -#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE -#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE -#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE -#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET -#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET - -#if defined(STM32WB) -#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE -#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE -#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET -#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET -#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED -#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED -#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED -#define QSPI_IRQHandler QUADSPI_IRQHandler -#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ - -#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE -#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE -#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE -#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE -#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET -#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET -#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE -#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE -#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE -#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE -#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET -#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET -#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE -#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE -#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE -#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE -#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET -#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET -#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE -#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE -#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE -#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE -#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE -#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE -#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET -#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET -#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE -#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE -#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE -#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE -#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET -#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET -#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE -#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE -#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE -#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE -#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET -#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET -#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE -#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE -#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE -#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE -#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET -#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET -#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE -#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE -#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE -#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE -#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE -#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE -#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE -#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE -#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE -#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE -#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET -#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET -#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE -#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE -#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE -#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE -#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET -#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET -#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE -#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE -#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE -#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE -#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET -#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET -#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE -#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE -#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET -#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET -#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE -#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE -#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET -#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET -#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE -#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE -#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET -#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET -#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE -#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE -#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET -#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET -#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE -#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE -#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET -#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET -#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE -#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE -#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE -#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE -#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET -#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET -#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE -#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE -#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE -#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE -#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET -#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET -#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE -#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE -#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE -#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE -#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET -#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET -#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE -#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE -#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE -#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE -#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET -#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET -#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE -#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE -#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE -#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE -#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET -#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET -#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE -#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE -#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE -#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE -#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET -#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET -#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE -#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE -#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE -#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE -#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET -#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET -#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE -#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE -#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE -#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE -#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET -#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET -#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE -#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE -#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE -#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE -#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET -#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET -#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE -#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE -#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE -#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE -#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET -#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET -#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE -#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE -#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET -#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET -#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE -#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE -#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE -#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE -#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET -#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET -#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE -#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE -#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE -#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE -#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET -#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET -#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE -#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE -#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE -#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE -#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET -#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET -#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE -#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE -#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE -#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE -#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET -#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET -#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE -#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE -#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE -#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE -#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET -#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET -#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE -#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE -#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE -#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE -#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET -#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET -#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE -#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE -#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE -#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE -#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET -#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET -#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE -#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE -#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE -#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE -#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET -#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET -#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE -#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE -#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET -#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET -#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE -#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE -#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET -#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET -#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE -#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE -#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET -#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE -#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE -#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE -#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE -#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET - -#if defined(STM32H7) -#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE -#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE -#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE -#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE - -#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ -#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ - - -#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED -#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED -#endif - -#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE -#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE -#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE -#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE -#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET -#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET - -#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE -#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE -#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET -#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET -#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE -#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE -#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE -#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE -#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET -#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET -#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE -#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE -#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE -#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE -#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE -#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE -#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET -#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET -#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE -#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE - -#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET -#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET -#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE -#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE -#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE -#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE -#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE -#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE -#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE -#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE -#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE -#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE -#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE -#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE -#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE -#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE -#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE -#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE -#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE -#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET -#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET -#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE -#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE -#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE -#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE -#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE -#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET -#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET -#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE -#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE -#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE -#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE -#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET -#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET -#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE -#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE -#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE -#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE -#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET -#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET -#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE -#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE -#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE -#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE -#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE -#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE -#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE -#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE -#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE -#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE -#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE -#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE -#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE -#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE -#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE -#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE -#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE -#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE -#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE -#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE -#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE -#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET -#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET -#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE -#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE -#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE -#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE -#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET -#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET -#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE -#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE -#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE -#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE -#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET -#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET -#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE -#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE -#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE -#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE -#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET -#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET -#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE -#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE -#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE -#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE -#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET -#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE -#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE -#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE -#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE -#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE -#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE -#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET -#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET -#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE -#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE -#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE -#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE -#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET -#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET -#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE -#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE -#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE -#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE -#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET -#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET -#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE -#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE -#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE -#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE -#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET -#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET -#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE -#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE -#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED -#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET -#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET -#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE -#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED -#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE -#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE -#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE -#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE -#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE -#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE -#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE -#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE -#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE -#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET -#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET -#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE -#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE -#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET -#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET -#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE -#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE -#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE -#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE -#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET -#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET -#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE -#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE - -/* alias define maintained for legacy */ -#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET -#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET - -#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE -#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE -#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE -#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE -#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE -#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE -#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE -#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE -#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE -#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE -#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE -#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE -#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE -#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE -#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE -#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE -#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE -#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE -#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE -#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE - -#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET -#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET -#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET -#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET -#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET -#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET -#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET -#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET -#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET -#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET -#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET -#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET -#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET -#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET -#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET -#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET -#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET -#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET -#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET -#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET - -#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED -#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED -#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED -#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED -#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED -#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED -#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED -#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED -#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED -#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED -#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED -#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED -#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED -#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED -#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED -#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED -#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED -#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED -#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED -#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED -#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED -#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED -#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED -#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED -#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED -#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED -#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED -#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED -#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED -#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED -#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED -#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED -#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED -#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED -#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED -#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED -#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED -#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED -#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED -#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED -#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED -#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED -#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED -#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED -#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED -#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED -#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED -#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED -#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED -#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED -#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED -#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED -#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED -#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED -#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED -#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED -#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED -#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED -#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED -#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED -#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED -#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED -#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED -#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED -#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED -#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED -#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED -#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED -#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED -#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED -#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED -#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED -#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED -#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED -#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED -#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED -#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED -#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED -#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED -#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED -#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED -#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED -#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED -#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED -#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED -#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED -#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED -#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED -#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED -#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED -#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED -#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED -#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED -#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED -#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED -#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED -#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED -#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED -#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED -#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED -#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED -#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED -#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED -#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED -#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED -#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED -#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED -#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED -#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED -#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED -#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED -#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED -#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED -#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED -#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED -#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED - -#if defined(STM32L1) -#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE -#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE -#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET -#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET -#endif /* STM32L1 */ - -#if defined(STM32F4) -#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET -#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET -#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE -#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE -#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE -#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE -#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED -#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED -#define Sdmmc1ClockSelection SdioClockSelection -#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO -#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 -#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK -#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG -#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE -#endif - -#if defined(STM32F7) || defined(STM32L4) -#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET -#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE -#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE -#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE -#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED -#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED -#define SdioClockSelection Sdmmc1ClockSelection -#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 -#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG -#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE -#endif - -#if defined(STM32F7) -#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 -#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK -#endif - -#if defined(STM32H7) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() -#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() -#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() -#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() -#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() -#endif - -#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG -#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG - -#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE - -#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE -#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE -#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK -#define IS_RCC_HCLK_DIV IS_RCC_PCLK -#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK - -#define RCC_IT_HSI14 RCC_IT_HSI14RDY - -#define RCC_IT_CSSLSE RCC_IT_LSECSS -#define RCC_IT_CSSHSE RCC_IT_CSS - -#define RCC_PLLMUL_3 RCC_PLL_MUL3 -#define RCC_PLLMUL_4 RCC_PLL_MUL4 -#define RCC_PLLMUL_6 RCC_PLL_MUL6 -#define RCC_PLLMUL_8 RCC_PLL_MUL8 -#define RCC_PLLMUL_12 RCC_PLL_MUL12 -#define RCC_PLLMUL_16 RCC_PLL_MUL16 -#define RCC_PLLMUL_24 RCC_PLL_MUL24 -#define RCC_PLLMUL_32 RCC_PLL_MUL32 -#define RCC_PLLMUL_48 RCC_PLL_MUL48 - -#define RCC_PLLDIV_2 RCC_PLL_DIV2 -#define RCC_PLLDIV_3 RCC_PLL_DIV3 -#define RCC_PLLDIV_4 RCC_PLL_DIV4 - -#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE -#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG -#define RCC_MCO_NODIV RCC_MCODIV_1 -#define RCC_MCO_DIV1 RCC_MCODIV_1 -#define RCC_MCO_DIV2 RCC_MCODIV_2 -#define RCC_MCO_DIV4 RCC_MCODIV_4 -#define RCC_MCO_DIV8 RCC_MCODIV_8 -#define RCC_MCO_DIV16 RCC_MCODIV_16 -#define RCC_MCO_DIV32 RCC_MCODIV_32 -#define RCC_MCO_DIV64 RCC_MCODIV_64 -#define RCC_MCO_DIV128 RCC_MCODIV_128 -#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK -#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI -#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE -#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK -#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI -#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 -#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 -#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE -#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK -#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK -#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 - -#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) || defined(STM32C0) -#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE -#else -#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK -#endif - -#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 -#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL -#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI -#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL -#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL -#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 -#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 -#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 - -#define HSION_BitNumber RCC_HSION_BIT_NUMBER -#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER -#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER -#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER -#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER -#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER -#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER -#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER -#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER -#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER -#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER -#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER -#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER -#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER -#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER -#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER -#define LSION_BitNumber RCC_LSION_BIT_NUMBER -#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER -#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER -#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER -#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER -#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER -#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER -#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER -#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER -#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER -#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS -#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS -#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS -#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS -#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE -#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE - -#define CR_HSION_BB RCC_CR_HSION_BB -#define CR_CSSON_BB RCC_CR_CSSON_BB -#define CR_PLLON_BB RCC_CR_PLLON_BB -#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB -#define CR_MSION_BB RCC_CR_MSION_BB -#define CSR_LSION_BB RCC_CSR_LSION_BB -#define CSR_LSEON_BB RCC_CSR_LSEON_BB -#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB -#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB -#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB -#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB -#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB -#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB -#define CR_HSEON_BB RCC_CR_HSEON_BB -#define CSR_RMVF_BB RCC_CSR_RMVF_BB -#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB -#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB - -#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE -#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE -#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE -#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE -#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE - -#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT - -#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN -#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF - -#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 -#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ -#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP -#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ -#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE -#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 - -#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE -#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE -#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED -#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED -#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET -#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET -#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE -#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE -#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED -#define DfsdmClockSelection Dfsdm1ClockSelection -#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 -#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 -#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK -#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG -#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE -#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 -#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 -#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 -#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 - -#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 -#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 -#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 -#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 -#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 -#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 -#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 -#if defined(STM32U5) -#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL -#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL -#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE -#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE -#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE -#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE -#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE -#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE -#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE -#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE -#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE -#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT -#define RCC_PERIPHCLK_CLK48 RCC_PERIPHCLK_ICLK -#define RCC_CLK48CLKSOURCE_HSI48 RCC_ICLK_CLKSOURCE_HSI48 -#define RCC_CLK48CLKSOURCE_PLL2 RCC_ICLK_CLKSOURCE_PLL2 -#define RCC_CLK48CLKSOURCE_PLL1 RCC_ICLK_CLKSOURCE_PLL1 -#define RCC_CLK48CLKSOURCE_MSIK RCC_ICLK_CLKSOURCE_MSIK -#define __HAL_RCC_ADC1_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE -#define __HAL_RCC_ADC1_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE -#define __HAL_RCC_ADC1_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED -#define __HAL_RCC_ADC1_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED -#define __HAL_RCC_ADC1_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET -#define __HAL_RCC_ADC1_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET -#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC12_CLK_SLEEP_ENABLE -#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC12_CLK_SLEEP_DISABLE -#define __HAL_RCC_GET_CLK48_SOURCE __HAL_RCC_GET_ICLK_SOURCE -#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE -#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE -#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG -#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE -#endif /* STM32U5 */ - -/** - * @} - */ - -/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose - * @{ - */ -#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) - -/** - * @} - */ - -/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx)|| \ - defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \ - defined (STM32C0) -#else -#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG -#endif -#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT -#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT - -#if defined (STM32F1) -#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() - -#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() - -#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() - -#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() - -#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() -#else -#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) -#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) -#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) -#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) -#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) -#endif /* STM32F1 */ - -#define IS_ALARM IS_RTC_ALARM -#define IS_ALARM_MASK IS_RTC_ALARM_MASK -#define IS_TAMPER IS_RTC_TAMPER -#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE -#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER -#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT -#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE -#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION -#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE -#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ -#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION -#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER -#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK -#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER - -#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE -#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE - -/** - * @} - */ - -/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose - * @{ - */ - -#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE -#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS - -#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1) -#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE -#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE -#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE - -#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV -#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV -#endif - -#if defined(STM32F4) || defined(STM32F2) -#define SD_SDMMC_DISABLED SD_SDIO_DISABLED -#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY -#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED -#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION -#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND -#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT -#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED -#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE -#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE -#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE -#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL -#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT -#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT -#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG -#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG -#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT -#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT -#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS -#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT -#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND -/* alias CMSIS */ -#define SDMMC1_IRQn SDIO_IRQn -#define SDMMC1_IRQHandler SDIO_IRQHandler -#endif - -#if defined(STM32F7) || defined(STM32L4) -#define SD_SDIO_DISABLED SD_SDMMC_DISABLED -#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY -#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED -#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION -#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND -#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT -#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED -#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE -#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE -#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE -#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE -#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT -#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT -#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG -#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG -#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT -#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT -#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS -#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT -#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND -/* alias CMSIS for compatibilities */ -#define SDIO_IRQn SDMMC1_IRQn -#define SDIO_IRQHandler SDMMC1_IRQHandler -#endif - -#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) -#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef -#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef -#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef -#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef -#endif - -#if defined(STM32H7) || defined(STM32L5) -#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback -#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback -#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback -#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback -#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback -#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback -#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback -#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback -#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback -#endif -/** - * @} - */ - -/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT -#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT -#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE -#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE -#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE -#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE - -#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE -#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE - -#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE - -/** - * @} - */ - -/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 -#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 -#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START -#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH -#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR -#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE -#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE -#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_SPI_1LINE_TX SPI_1LINE_TX -#define __HAL_SPI_1LINE_RX SPI_1LINE_RX -#define __HAL_SPI_RESET_CRC SPI_RESET_CRC - -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE -#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION -#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE -#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION - -#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD - -#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE -#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE - -/** - * @} - */ - - -/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT -#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT -#define __USART_ENABLE __HAL_USART_ENABLE -#define __USART_DISABLE __HAL_USART_DISABLE - -#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE -#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE - -#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) -#define USART_OVERSAMPLING_16 0x00000000U -#define USART_OVERSAMPLING_8 USART_CR1_OVER8 - -#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ - ((__SAMPLING__) == USART_OVERSAMPLING_8)) -#endif /* STM32F0 || STM32F3 || STM32F7 */ -/** - * @} - */ - -/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose - * @{ - */ -#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE - -#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE -#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE -#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE -#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE - -#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE -#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE -#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE -#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE - -#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE - -#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE -#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT - -#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE -#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT - -#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup -#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup - -#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo -#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE -#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE - -#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE -#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT - -#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE - -#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN -#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER -#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER -#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER -#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD -#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD -#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION -#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION -#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER -#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER -#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE -#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE - -#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 -/** - * @} - */ - -/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT -#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT -#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG -#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER -#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER -#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER - -#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE -#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE -#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE -/** - * @} - */ - -/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_LTDC_LAYER LTDC_LAYER -#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG -/** - * @} - */ - -/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose - * @{ - */ -#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE -#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE -#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE -#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE -#define SAI_STREOMODE SAI_STEREOMODE -#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY -#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL -#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL -#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL -#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL -#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL -#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE -#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 -#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE -/** - * @} - */ - -/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined(STM32H7) -#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow -#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT -#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA -#endif -/** - * @} - */ - -/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose - * @{ - */ -#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) -#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT -#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA -#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart -#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT -#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA -#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop -#endif -/** - * @} - */ - -/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) -#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE -#endif /* STM32L4 || STM32F4 || STM32F7 */ -/** - * @} - */ - -/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined (STM32F7) -#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE -#endif /* STM32F7 */ -/** - * @} - */ - -/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32_HAL_LEGACY */ - - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h deleted file mode 100644 index f7eb847..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h +++ /dev/null @@ -1,297 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal.h - * @author MCD Application Team - * @brief This file contains all the functions prototypes for the HAL - * module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_H -#define __STM32F4xx_HAL_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_conf.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup HAL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Constants HAL Exported Constants - * @{ - */ - -/** @defgroup HAL_TICK_FREQ Tick Frequency - * @{ - */ -typedef enum -{ - HAL_TICK_FREQ_10HZ = 100U, - HAL_TICK_FREQ_100HZ = 10U, - HAL_TICK_FREQ_1KHZ = 1U, - HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ -} HAL_TickFreqTypeDef; -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup HAL_Exported_Macros HAL Exported Macros - * @{ - */ - -/** @brief Freeze/Unfreeze Peripherals in Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -/** @brief Main Flash memory mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE)) - -/** @brief System Flash memory mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\ - }while(0); - -/** @brief Embedded SRAM mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); - -/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\ - }while(0); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable - * @{ - */ -/** @brief SYSCFG Break Lockup lock - * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input - * @note The selected configuration is locked and can be unlocked by system reset - */ -#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \ - SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \ - }while(0) -/** - * @} - */ - -/** @defgroup PVD_Lock_Enable PVD Lock - * @{ - */ -/** @brief SYSCFG Break PVD lock - * Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register - * @note The selected configuration is locked and can be unlocked by system reset - */ -#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \ - SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \ - }while(0) -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup HAL_Private_Macros HAL Private Macros - * @{ - */ -#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ - ((FREQ) == HAL_TICK_FREQ_100HZ) || \ - ((FREQ) == HAL_TICK_FREQ_1KHZ)) -/** - * @} - */ - -/* Exported variables --------------------------------------------------------*/ - -/** @addtogroup HAL_Exported_Variables - * @{ - */ -extern __IO uint32_t uwTick; -extern uint32_t uwTickPrio; -extern HAL_TickFreqTypeDef uwTickFreq; -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup HAL_Exported_Functions - * @{ - */ -/** @addtogroup HAL_Exported_Functions_Group1 - * @{ - */ -/* Initialization and Configuration functions ******************************/ -HAL_StatusTypeDef HAL_Init(void); -HAL_StatusTypeDef HAL_DeInit(void); -void HAL_MspInit(void); -void HAL_MspDeInit(void); -HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_IncTick(void); -void HAL_Delay(uint32_t Delay); -uint32_t HAL_GetTick(void); -uint32_t HAL_GetTickPrio(void); -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); -HAL_TickFreqTypeDef HAL_GetTickFreq(void); -void HAL_SuspendTick(void); -void HAL_ResumeTick(void); -uint32_t HAL_GetHalVersion(void); -uint32_t HAL_GetREVID(void); -uint32_t HAL_GetDEVID(void); -void HAL_DBGMCU_EnableDBGSleepMode(void); -void HAL_DBGMCU_DisableDBGSleepMode(void); -void HAL_DBGMCU_EnableDBGStopMode(void); -void HAL_DBGMCU_DisableDBGStopMode(void); -void HAL_DBGMCU_EnableDBGStandbyMode(void); -void HAL_DBGMCU_DisableDBGStandbyMode(void); -void HAL_EnableCompensationCell(void); -void HAL_DisableCompensationCell(void); -uint32_t HAL_GetUIDw0(void); -uint32_t HAL_GetUIDw1(void); -uint32_t HAL_GetUIDw2(void); -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -void HAL_EnableMemorySwappingBank(void); -void HAL_DisableMemorySwappingBank(void); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Variables HAL Private Variables - * @{ - */ -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Constants HAL Private Constants - * @{ - */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_H */ - - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h deleted file mode 100644 index fdc96b5..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h +++ /dev/null @@ -1,407 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cortex.h - * @author MCD Application Team - * @brief Header file of CORTEX HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CORTEX_H -#define __STM32F4xx_HAL_CORTEX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CORTEX - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Types Cortex Exported Types - * @{ - */ - -#if (__MPU_PRESENT == 1U) -/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition - * @brief MPU Region initialization structure - * @{ - */ -typedef struct -{ - uint8_t Enable; /*!< Specifies the status of the region. - This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ - uint8_t Number; /*!< Specifies the number of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Number */ - uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ - uint8_t Size; /*!< Specifies the size of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Size */ - uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint8_t TypeExtField; /*!< Specifies the TEX field level. - This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ - uint8_t AccessPermission; /*!< Specifies the region access permission type. - This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ - uint8_t DisableExec; /*!< Specifies the instruction access status. - This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ - uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ - uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. - This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ - uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ -}MPU_Region_InitTypeDef; -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants - * @{ - */ - -/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group - * @{ - */ -#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority - 0 bits for subpriority */ -/** - * @} - */ - -/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source - * @{ - */ -#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U -#define SYSTICK_CLKSOURCE_HCLK 0x00000004U - -/** - * @} - */ - -#if (__MPU_PRESENT == 1) -/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control - * @{ - */ -#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U -#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk -#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk -#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) - -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable - * @{ - */ -#define MPU_REGION_ENABLE ((uint8_t)0x01) -#define MPU_REGION_DISABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access - * @{ - */ -#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) -#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable - * @{ - */ -#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable - * @{ - */ -#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable - * @{ - */ -#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels - * @{ - */ -#define MPU_TEX_LEVEL0 ((uint8_t)0x00) -#define MPU_TEX_LEVEL1 ((uint8_t)0x01) -#define MPU_TEX_LEVEL2 ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size - * @{ - */ -#define MPU_REGION_SIZE_32B ((uint8_t)0x04) -#define MPU_REGION_SIZE_64B ((uint8_t)0x05) -#define MPU_REGION_SIZE_128B ((uint8_t)0x06) -#define MPU_REGION_SIZE_256B ((uint8_t)0x07) -#define MPU_REGION_SIZE_512B ((uint8_t)0x08) -#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) -#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) -#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) -#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) -#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) -#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) -#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) -#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) -#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) -#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) -#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) -#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) -#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) -#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) -#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) -#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) -#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) -#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) -#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) -#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) -#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) -#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) -#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes - * @{ - */ -#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) -#define MPU_REGION_PRIV_RW ((uint8_t)0x01) -#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) -#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) -#define MPU_REGION_PRIV_RO ((uint8_t)0x05) -#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number - * @{ - */ -#define MPU_REGION_NUMBER0 ((uint8_t)0x00) -#define MPU_REGION_NUMBER1 ((uint8_t)0x01) -#define MPU_REGION_NUMBER2 ((uint8_t)0x02) -#define MPU_REGION_NUMBER3 ((uint8_t)0x03) -#define MPU_REGION_NUMBER4 ((uint8_t)0x04) -#define MPU_REGION_NUMBER5 ((uint8_t)0x05) -#define MPU_REGION_NUMBER6 ((uint8_t)0x06) -#define MPU_REGION_NUMBER7 ((uint8_t)0x07) -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - - -/* Exported Macros -----------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CORTEX_Exported_Functions - * @{ - */ - -/** @addtogroup CORTEX_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); -void HAL_NVIC_SystemReset(void); -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); -/** - * @} - */ - -/** @addtogroup CORTEX_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -uint32_t HAL_NVIC_GetPriorityGrouping(void); -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); -void HAL_SYSTICK_IRQHandler(void); -void HAL_SYSTICK_Callback(void); - -#if (__MPU_PRESENT == 1U) -void HAL_MPU_Enable(uint32_t MPU_Control); -void HAL_MPU_Disable(void); -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); -#endif /* __MPU_PRESENT */ -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CORTEX_Private_Macros CORTEX Private Macros - * @{ - */ -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ - ((GROUP) == NVIC_PRIORITYGROUP_1) || \ - ((GROUP) == NVIC_PRIORITYGROUP_2) || \ - ((GROUP) == NVIC_PRIORITYGROUP_3) || \ - ((GROUP) == NVIC_PRIORITYGROUP_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) - -#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U) - -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ - ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) - -#if (__MPU_PRESENT == 1U) -#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ - ((STATE) == MPU_REGION_DISABLE)) - -#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ - ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) - -#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ - ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) - -#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ - ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) - -#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ - ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) - -#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ - ((TYPE) == MPU_TEX_LEVEL1) || \ - ((TYPE) == MPU_TEX_LEVEL2)) - -#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RW) || \ - ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ - ((TYPE) == MPU_REGION_FULL_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RO) || \ - ((TYPE) == MPU_REGION_PRIV_RO_URO)) - -#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ - ((NUMBER) == MPU_REGION_NUMBER1) || \ - ((NUMBER) == MPU_REGION_NUMBER2) || \ - ((NUMBER) == MPU_REGION_NUMBER3) || \ - ((NUMBER) == MPU_REGION_NUMBER4) || \ - ((NUMBER) == MPU_REGION_NUMBER5) || \ - ((NUMBER) == MPU_REGION_NUMBER6) || \ - ((NUMBER) == MPU_REGION_NUMBER7)) - -#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ - ((SIZE) == MPU_REGION_SIZE_64B) || \ - ((SIZE) == MPU_REGION_SIZE_128B) || \ - ((SIZE) == MPU_REGION_SIZE_256B) || \ - ((SIZE) == MPU_REGION_SIZE_512B) || \ - ((SIZE) == MPU_REGION_SIZE_1KB) || \ - ((SIZE) == MPU_REGION_SIZE_2KB) || \ - ((SIZE) == MPU_REGION_SIZE_4KB) || \ - ((SIZE) == MPU_REGION_SIZE_8KB) || \ - ((SIZE) == MPU_REGION_SIZE_16KB) || \ - ((SIZE) == MPU_REGION_SIZE_32KB) || \ - ((SIZE) == MPU_REGION_SIZE_64KB) || \ - ((SIZE) == MPU_REGION_SIZE_128KB) || \ - ((SIZE) == MPU_REGION_SIZE_256KB) || \ - ((SIZE) == MPU_REGION_SIZE_512KB) || \ - ((SIZE) == MPU_REGION_SIZE_1MB) || \ - ((SIZE) == MPU_REGION_SIZE_2MB) || \ - ((SIZE) == MPU_REGION_SIZE_4MB) || \ - ((SIZE) == MPU_REGION_SIZE_8MB) || \ - ((SIZE) == MPU_REGION_SIZE_16MB) || \ - ((SIZE) == MPU_REGION_SIZE_32MB) || \ - ((SIZE) == MPU_REGION_SIZE_64MB) || \ - ((SIZE) == MPU_REGION_SIZE_128MB) || \ - ((SIZE) == MPU_REGION_SIZE_256MB) || \ - ((SIZE) == MPU_REGION_SIZE_512MB) || \ - ((SIZE) == MPU_REGION_SIZE_1GB) || \ - ((SIZE) == MPU_REGION_SIZE_2GB) || \ - ((SIZE) == MPU_REGION_SIZE_4GB)) - -#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CORTEX_H */ - - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h deleted file mode 100644 index f9bbec2..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h +++ /dev/null @@ -1,210 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_def.h - * @author MCD Application Team - * @brief This file contains HAL common defines, enumeration, macros and - * structures definitions. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DEF -#define __STM32F4xx_HAL_DEF - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" -#include "Legacy/stm32_hal_legacy.h" -#include - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief HAL Status structures definition - */ -typedef enum -{ - HAL_OK = 0x00U, - HAL_ERROR = 0x01U, - HAL_BUSY = 0x02U, - HAL_TIMEOUT = 0x03U -} HAL_StatusTypeDef; - -/** - * @brief HAL Lock structures definition - */ -typedef enum -{ - HAL_UNLOCKED = 0x00U, - HAL_LOCKED = 0x01U -} HAL_LockTypeDef; - -/* Exported macro ------------------------------------------------------------*/ - -#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ - -#define HAL_MAX_DELAY 0xFFFFFFFFU - -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) -#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) - -#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ - do{ \ - (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ - (__DMA_HANDLE__).Parent = (__HANDLE__); \ - } while(0U) - -/** @brief Reset the Handle's State field. - * @param __HANDLE__ specifies the Peripheral Handle. - * @note This macro can be used for the following purpose: - * - When the Handle is declared as local variable; before passing it as parameter - * to HAL_PPP_Init() for the first time, it is mandatory to use this macro - * to set to 0 the Handle's "State" field. - * Otherwise, "State" field may have any random value and the first time the function - * HAL_PPP_Init() is called, the low level hardware initialization will be missed - * (i.e. HAL_PPP_MspInit() will not be executed). - * - When there is a need to reconfigure the low level hardware: instead of calling - * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). - * In this later function, when the Handle's "State" field is set to 0, it will execute the function - * HAL_PPP_MspInit() which will reconfigure the low level hardware. - * @retval None - */ -#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) - -#if (USE_RTOS == 1U) - /* Reserved for future use */ - #error "USE_RTOS should be 0 in the current HAL release" -#else - #define __HAL_LOCK(__HANDLE__) \ - do{ \ - if((__HANDLE__)->Lock == HAL_LOCKED) \ - { \ - return HAL_BUSY; \ - } \ - else \ - { \ - (__HANDLE__)->Lock = HAL_LOCKED; \ - } \ - }while (0U) - - #define __HAL_UNLOCK(__HANDLE__) \ - do{ \ - (__HANDLE__)->Lock = HAL_UNLOCKED; \ - }while (0U) -#endif /* USE_RTOS */ - -#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif - #ifndef __packed - #define __packed __attribute__((packed)) - #endif -#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif /* __weak */ - #ifndef __packed - #define __packed __attribute__((__packed__)) - #endif /* __packed */ -#endif /* __GNUC__ */ - - -/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif - #ifndef __ALIGN_END - #define __ALIGN_END __attribute__ ((aligned (4))) - #endif -#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __ALIGN_END -#define __ALIGN_END __attribute__ ((aligned (4))) - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif /* __ALIGN_BEGIN */ -#else - #ifndef __ALIGN_END - #define __ALIGN_END - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #if defined (__CC_ARM) /* ARM Compiler V5*/ -#define __ALIGN_BEGIN __align(4) - #elif defined (__ICCARM__) /* IAR Compiler */ - #define __ALIGN_BEGIN - #endif /* __CC_ARM */ - #endif /* __ALIGN_BEGIN */ -#endif /* __GNUC__ */ - - -/** - * @brief __RAM_FUNC definition - */ -#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) -/* ARM Compiler V4/V5 and V6 - -------------------------- - RAM functions are defined using the toolchain options. - Functions that are executed in RAM should reside in a separate source module. - Using the 'Options for File' dialog you can simply change the 'Code / Const' - area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the 'Options for Target' - dialog. -*/ -#define __RAM_FUNC - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- - RAM functions are defined using a specific toolchain keyword "__ramfunc". -*/ -#define __RAM_FUNC __ramfunc - -#elif defined ( __GNUC__ ) -/* GNU Compiler - ------------ - RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". -*/ -#define __RAM_FUNC __attribute__((section(".RamFunc"))) - -#endif - -/** - * @brief __NOINLINE definition - */ -#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) -/* ARM V4/V5 and V6 & GNU Compiler - ------------------------------- -*/ -#define __NOINLINE __attribute__ ( (noinline) ) - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- -*/ -#define __NOINLINE _Pragma("optimize = no_inline") - -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ___STM32F4xx_HAL_DEF */ - - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h deleted file mode 100644 index 7ff3836..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h +++ /dev/null @@ -1,802 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma.h - * @author MCD Application Team - * @brief Header file of DMA HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA_H -#define __STM32F4xx_HAL_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Types DMA Exported Types - * @brief DMA Exported Types - * @{ - */ - -/** - * @brief DMA Configuration Structure definition - */ -typedef struct -{ - uint32_t Channel; /*!< Specifies the channel used for the specified stream. - This parameter can be a value of @ref DMA_Channel_selection */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_Data_transfer_direction */ - - uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - - uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_Memory_incremented_mode */ - - uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_Peripheral_data_size */ - - uint32_t MemDataAlignment; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_Memory_data_size */ - - uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx. - This parameter can be a value of @ref DMA_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Stream */ - - uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx. - This parameter can be a value of @ref DMA_Priority_level */ - - uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. - This parameter can be a value of @ref DMA_FIFO_direct_mode - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected stream */ - - uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_FIFO_threshold_level */ - - uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Memory_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ - - uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Peripheral_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ -}DMA_InitTypeDef; - - -/** - * @brief HAL DMA State structures definition - */ -typedef enum -{ - HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ - HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ - HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ - HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */ - HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */ -}HAL_DMA_StateTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ - HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ -}HAL_DMA_LevelCompleteTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ - HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */ - HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */ - HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */ - HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ - HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ - HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */ -}HAL_DMA_CallbackIDTypeDef; - -/** - * @brief DMA handle Structure definition - */ -typedef struct __DMA_HandleTypeDef -{ - DMA_Stream_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - - __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */ - - void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */ - - void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */ - - __IO uint32_t ErrorCode; /*!< DMA Error code */ - - uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */ - - uint32_t StreamIndex; /*!< DMA Stream Index */ - -}DMA_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @brief DMA Exported constants - * @{ - */ - -/** @defgroup DMA_Error_Code DMA Error Code - * @brief DMA Error Code - * @{ - */ -#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ -#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */ -#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */ -#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ -#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */ -#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */ -#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ -/** - * @} - */ - -/** @defgroup DMA_Channel_selection DMA Channel selection - * @brief DMA channel selection - * @{ - */ -#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */ -#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */ -#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */ -#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */ -#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */ -#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */ -#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */ -#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */ -#if defined (DMA_SxCR_CHSEL_3) -#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */ -#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */ -#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10 */ -#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11 */ -#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12 */ -#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13 */ -#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14 */ -#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15 */ -#endif /* DMA_SxCR_CHSEL_3 */ -/** - * @} - */ - -/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction - * @brief DMA data transfer direction - * @{ - */ -#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ -#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */ -#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode - * @brief DMA peripheral incremented mode - * @{ - */ -#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */ -#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode - * @brief DMA memory incremented mode - * @{ - */ -#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */ -#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size - * @brief DMA peripheral data size - * @{ - */ -#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ -#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ -#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_Memory_data_size DMA Memory data size - * @brief DMA memory data size - * @{ - */ -#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ -#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ -#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_mode DMA mode - * @brief DMA mode - * @{ - */ -#define DMA_NORMAL 0x00000000U /*!< Normal mode */ -#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */ -#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */ -/** - * @} - */ - -/** @defgroup DMA_Priority_level DMA Priority level - * @brief DMA priority levels - * @{ - */ -#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */ -#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */ -#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */ -#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode - * @brief DMA FIFO direct mode - * @{ - */ -#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ -#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level - * @brief DMA FIFO level - * @{ - */ -#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */ -#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */ -#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */ -#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */ -/** - * @} - */ - -/** @defgroup DMA_Memory_burst DMA Memory burst - * @brief DMA memory burst - * @{ - */ -#define DMA_MBURST_SINGLE 0x00000000U -#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0) -#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1) -#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST) -/** - * @} - */ - -/** @defgroup DMA_Peripheral_burst DMA Peripheral burst - * @brief DMA peripheral burst - * @{ - */ -#define DMA_PBURST_SINGLE 0x00000000U -#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0) -#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1) -#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST) -/** - * @} - */ - -/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions - * @brief DMA interrupts definition - * @{ - */ -#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE) -#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE) -#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE) -#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE) -#define DMA_IT_FE 0x00000080U -/** - * @} - */ - -/** @defgroup DMA_flag_definitions DMA flag definitions - * @brief DMA flag definitions - * @{ - */ -#define DMA_FLAG_FEIF0_4 0x00000001U -#define DMA_FLAG_DMEIF0_4 0x00000004U -#define DMA_FLAG_TEIF0_4 0x00000008U -#define DMA_FLAG_HTIF0_4 0x00000010U -#define DMA_FLAG_TCIF0_4 0x00000020U -#define DMA_FLAG_FEIF1_5 0x00000040U -#define DMA_FLAG_DMEIF1_5 0x00000100U -#define DMA_FLAG_TEIF1_5 0x00000200U -#define DMA_FLAG_HTIF1_5 0x00000400U -#define DMA_FLAG_TCIF1_5 0x00000800U -#define DMA_FLAG_FEIF2_6 0x00010000U -#define DMA_FLAG_DMEIF2_6 0x00040000U -#define DMA_FLAG_TEIF2_6 0x00080000U -#define DMA_FLAG_HTIF2_6 0x00100000U -#define DMA_FLAG_TCIF2_6 0x00200000U -#define DMA_FLAG_FEIF3_7 0x00400000U -#define DMA_FLAG_DMEIF3_7 0x01000000U -#define DMA_FLAG_TEIF3_7 0x02000000U -#define DMA_FLAG_HTIF3_7 0x04000000U -#define DMA_FLAG_TCIF3_7 0x08000000U -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @brief Reset DMA handle state - * @param __HANDLE__ specifies the DMA handle. - * @retval None - */ -#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) - -/** - * @brief Return the current DMA Stream FIFO filled level. - * @param __HANDLE__ DMA handle - * @retval The FIFO filling state. - * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full - * and not empty. - * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. - * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. - * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. - * - DMA_FIFOStatus_Empty: when FIFO is empty - * - DMA_FIFOStatus_Full: when FIFO is full - */ -#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS))) - -/** - * @brief Enable the specified DMA Stream. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN) - -/** - * @brief Disable the specified DMA Stream. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN) - -/* Interrupt & Flag management */ - -/** - * @brief Return the current DMA Stream transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer complete flag index. - */ -#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ - DMA_FLAG_TCIF3_7) - -/** - * @brief Return the current DMA Stream half transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified half transfer complete flag index. - */ -#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ - DMA_FLAG_HTIF3_7) - -/** - * @brief Return the current DMA Stream transfer error flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ - DMA_FLAG_TEIF3_7) - -/** - * @brief Return the current DMA Stream FIFO error flag. - * @param __HANDLE__ DMA handle - * @retval The specified FIFO error flag index. - */ -#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\ - DMA_FLAG_FEIF3_7) - -/** - * @brief Return the current DMA Stream direct mode error flag. - * @param __HANDLE__ DMA handle - * @retval The specified direct mode error flag index. - */ -#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\ - DMA_FLAG_DMEIF3_7) - -/** - * @brief Get the DMA Stream pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) - -/** - * @brief Clear the DMA Stream pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval None - */ -#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) - -/** - * @brief Enable the specified DMA Stream interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__))) - -/** - * @brief Disable the specified DMA Stream interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__))) - -/** - * @brief Check whether the specified DMA Stream interrupt is enabled or disabled. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval The state of DMA_IT. - */ -#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ - ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \ - ((__HANDLE__)->Instance->FCR & (__INTERRUPT__))) - -/** - * @brief Writes the number of data units to be transferred on the DMA Stream. - * @param __HANDLE__ DMA handle - * @param __COUNTER__ Number of data units to be transferred (from 0 to 65535) - * Number of data items depends only on the Peripheral data format. - * - * @note If Peripheral data format is Bytes: number of data units is equal - * to total number of bytes to be transferred. - * - * @note If Peripheral data format is Half-Word: number of data units is - * equal to total number of bytes to be transferred / 2. - * - * @note If Peripheral data format is Word: number of data units is equal - * to total number of bytes to be transferred / 4. - * - * @retval The number of remaining data units in the current DMAy Streamx transfer. - */ -#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__)) - -/** - * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. - * @param __HANDLE__ DMA handle - * - * @retval The number of remaining data units in the current DMA Stream transfer. - */ -#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR) - - -/* Include DMA HAL Extension module */ -#include "stm32f4xx_hal_dma_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Functions DMA Exported Functions - * @brief DMA Exported functions - * @{ - */ - -/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions - * @brief I/O operation functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_CleanCallbacks(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/** - * @} - */ -/* Private Constants -------------------------------------------------------------*/ -/** @defgroup DMA_Private_Constants DMA Private Constants - * @brief DMA private defines and constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA_Private_Macros DMA Private Macros - * @brief DMA private macros - * @{ - */ -#if defined (DMA_SxCR_CHSEL_3) -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7) || \ - ((CHANNEL) == DMA_CHANNEL_8) || \ - ((CHANNEL) == DMA_CHANNEL_9) || \ - ((CHANNEL) == DMA_CHANNEL_10)|| \ - ((CHANNEL) == DMA_CHANNEL_11)|| \ - ((CHANNEL) == DMA_CHANNEL_12)|| \ - ((CHANNEL) == DMA_CHANNEL_13)|| \ - ((CHANNEL) == DMA_CHANNEL_14)|| \ - ((CHANNEL) == DMA_CHANNEL_15)) -#else -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7)) -#endif /* DMA_SxCR_CHSEL_3 */ - -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ - ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U)) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ - ((STATE) == DMA_PINC_DISABLE)) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ - ((STATE) == DMA_MINC_DISABLE)) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ - ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_PDATAALIGN_WORD)) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ - ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_MDATAALIGN_WORD )) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ - ((MODE) == DMA_CIRCULAR) || \ - ((MODE) == DMA_PFCTRL)) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ - ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ - ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) - -#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \ - ((STATE) == DMA_FIFOMODE_ENABLE)) - -#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL)) - -#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \ - ((BURST) == DMA_MBURST_INC4) || \ - ((BURST) == DMA_MBURST_INC8) || \ - ((BURST) == DMA_MBURST_INC16)) - -#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \ - ((BURST) == DMA_PBURST_INC4) || \ - ((BURST) == DMA_PBURST_INC8) || \ - ((BURST) == DMA_PBURST_INC16)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMA_Private_Functions DMA Private Functions - * @brief DMA private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DMA_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h deleted file mode 100644 index 9858c74..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h +++ /dev/null @@ -1,102 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma_ex.h - * @author MCD Application Team - * @brief Header file of DMA HAL extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA_EX_H -#define __STM32F4xx_HAL_DMA_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMAEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Types DMAEx Exported Types - * @brief DMAEx Exported types - * @{ - */ - -/** - * @brief HAL DMA Memory definition - */ -typedef enum -{ - MEMORY0 = 0x00U, /*!< Memory 0 */ - MEMORY1 = 0x01U /*!< Memory 1 */ -}HAL_DMA_MemoryTypeDef; - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions - * @brief DMAEx Exported functions - * @{ - */ - -/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * @{ - */ - -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory); - -/** - * @} - */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMAEx_Private_Functions DMAEx Private Functions - * @brief DMAEx Private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_HAL_DMA_EX_H*/ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h deleted file mode 100644 index b18a228..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h +++ /dev/null @@ -1,366 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_exti.h - * @author MCD Application Team - * @brief Header file of EXTI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2018 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS.Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32f4xx_HAL_EXTI_H -#define STM32f4xx_HAL_EXTI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup EXTI EXTI - * @brief EXTI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup EXTI_Exported_Types EXTI Exported Types - * @{ - */ -typedef enum -{ - HAL_EXTI_COMMON_CB_ID = 0x00U -} EXTI_CallbackIDTypeDef; - -/** - * @brief EXTI Handle structure definition - */ -typedef struct -{ - uint32_t Line; /*!< Exti line number */ - void (* PendingCallback)(void); /*!< Exti pending callback */ -} EXTI_HandleTypeDef; - -/** - * @brief EXTI Configuration structure definition - */ -typedef struct -{ - uint32_t Line; /*!< The Exti line to be configured. This parameter - can be a value of @ref EXTI_Line */ - uint32_t Mode; /*!< The Exit Mode to be configured for a core. - This parameter can be a combination of @ref EXTI_Mode */ - uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter - can be a value of @ref EXTI_Trigger */ - uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. - This parameter is only possible for line 0 to 15. It - can be a value of @ref EXTI_GPIOSel */ -} EXTI_ConfigTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Constants EXTI Exported Constants - * @{ - */ - -/** @defgroup EXTI_Line EXTI Line - * @{ - */ -#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ -#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ -#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ -#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ -#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ -#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ -#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ -#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ -#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ -#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ -#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ -#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ -#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ -#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ -#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ -#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ -#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ -#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ -#if defined(EXTI_IMR_IM18) -#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ -#else -#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) /*!< No interrupt supported in this line */ -#endif /* EXTI_IMR_IM18 */ -#if defined(EXTI_IMR_IM19) -#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ -#else -#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */ -#endif /* EXTI_IMR_IM19 */ -#if defined(EXTI_IMR_IM20) -#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ -#else -#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) /*!< No interrupt supported in this line */ -#endif /* EXTI_IMR_IM20 */ -#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ -#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */ -#if defined(EXTI_IMR_IM23) -#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM1 asynchronous event */ -#endif /* EXTI_IMR_IM23 */ - -/** - * @} - */ - -/** @defgroup EXTI_Mode EXTI Mode - * @{ - */ -#define EXTI_MODE_NONE 0x00000000u -#define EXTI_MODE_INTERRUPT 0x00000001u -#define EXTI_MODE_EVENT 0x00000002u -/** - * @} - */ - -/** @defgroup EXTI_Trigger EXTI Trigger - * @{ - */ - -#define EXTI_TRIGGER_NONE 0x00000000u -#define EXTI_TRIGGER_RISING 0x00000001u -#define EXTI_TRIGGER_FALLING 0x00000002u -#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) -/** - * @} - */ - -/** @defgroup EXTI_GPIOSel EXTI GPIOSel - * @brief - * @{ - */ -#define EXTI_GPIOA 0x00000000u -#define EXTI_GPIOB 0x00000001u -#define EXTI_GPIOC 0x00000002u -#if defined (GPIOD) -#define EXTI_GPIOD 0x00000003u -#endif /* GPIOD */ -#if defined (GPIOE) -#define EXTI_GPIOE 0x00000004u -#endif /* GPIOE */ -#if defined (GPIOF) -#define EXTI_GPIOF 0x00000005u -#endif /* GPIOF */ -#if defined (GPIOG) -#define EXTI_GPIOG 0x00000006u -#endif /* GPIOG */ -#if defined (GPIOH) -#define EXTI_GPIOH 0x00000007u -#endif /* GPIOH */ -#if defined (GPIOI) -#define EXTI_GPIOI 0x00000008u -#endif /* GPIOI */ -#if defined (GPIOJ) -#define EXTI_GPIOJ 0x00000009u -#endif /* GPIOJ */ -#if defined (GPIOK) -#define EXTI_GPIOK 0x0000000Au -#endif /* GPIOK */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Macros EXTI Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Private constants --------------------------------------------------------*/ -/** @defgroup EXTI_Private_Constants EXTI Private Constants - * @{ - */ -/** - * @brief EXTI Line property definition - */ -#define EXTI_PROPERTY_SHIFT 24u -#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) -#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) -#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) -#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO) - -/** - * @brief EXTI bit usage - */ -#define EXTI_PIN_MASK 0x0000001Fu - -/** - * @brief EXTI Mask for interrupt & event mode - */ -#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) - -/** - * @brief EXTI Mask for trigger possibilities - */ -#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) - -/** - * @brief EXTI Line number - */ -#if defined(EXTI_IMR_IM23) -#define EXTI_LINE_NB 24UL -#else -#define EXTI_LINE_NB 23UL -#endif /* EXTI_IMR_IM23 */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup EXTI_Private_Macros EXTI Private Macros - * @{ - */ -#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ - ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ - (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ - (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) - -#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ - (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) - -#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) - -#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) - -#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) - -#if !defined (GPIOD) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOE) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOF) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOI) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOJ) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH) || \ - ((__PORT__) == EXTI_GPIOI)) -#else -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH) || \ - ((__PORT__) == EXTI_GPIOI) || \ - ((__PORT__) == EXTI_GPIOJ) || \ - ((__PORT__) == EXTI_GPIOK)) -#endif /* GPIOD */ - -#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Functions EXTI Exported Functions - * @brief EXTI Exported Functions - * @{ - */ - -/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions - * @brief Configuration functions - * @{ - */ -/* Configuration functions ****************************************************/ -HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); -HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); -HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); -HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); -HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); -/** - * @} - */ - -/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * @{ - */ -/* IO operation functions *****************************************************/ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32f4xx_HAL_EXTI_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h deleted file mode 100644 index 26d789e..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h +++ /dev/null @@ -1,425 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash.h - * @author MCD Application Team - * @brief Header file of FLASH HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FLASH_H -#define __STM32F4xx_HAL_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Procedure structure definition - */ -typedef enum -{ - FLASH_PROC_NONE = 0U, - FLASH_PROC_SECTERASE, - FLASH_PROC_MASSERASE, - FLASH_PROC_PROGRAM -} FLASH_ProcedureTypeDef; - -/** - * @brief FLASH handle Structure definition - */ -typedef struct -{ - __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ - - __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ - - __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/ - - __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/ - - __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/ - - __IO uint32_t Address; /*Internal variable to save address selected for program*/ - - HAL_LockTypeDef Lock; /* FLASH locking object */ - - __IO uint32_t ErrorCode; /* FLASH error code */ - -}FLASH_ProcessTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Constants FLASH Exported Constants - * @{ - */ -/** @defgroup FLASH_Error_Code FLASH Error Code - * @brief FLASH Error Code - * @{ - */ -#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */ -#define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */ -#define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */ -#define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */ -#define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */ -#define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */ -/** - * @} - */ - -/** @defgroup FLASH_Type_Program FLASH Type Program - * @{ - */ -#define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */ -/** - * @} - */ - -/** @defgroup FLASH_Flag_definition FLASH Flag definition - * @brief Flag definition - * @{ - */ -#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ -#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */ -#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ -#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ -#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ -#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */ -#if defined(FLASH_SR_RDERR) -#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */ -#endif /* FLASH_SR_RDERR */ -#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ -/** - * @} - */ - -/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition - * @brief FLASH Interrupt definition - * @{ - */ -#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ -#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */ -/** - * @} - */ - -/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism - * @{ - */ -#define FLASH_PSIZE_BYTE 0x00000000U -#define FLASH_PSIZE_HALF_WORD 0x00000100U -#define FLASH_PSIZE_WORD 0x00000200U -#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U -#define CR_PSIZE_MASK 0xFFFFFCFFU -/** - * @} - */ - -/** @defgroup FLASH_Keys FLASH Keys - * @{ - */ -#define RDP_KEY ((uint16_t)0x00A5) -#define FLASH_KEY1 0x45670123U -#define FLASH_KEY2 0xCDEF89ABU -#define FLASH_OPT_KEY1 0x08192A3BU -#define FLASH_OPT_KEY2 0x4C5D6E7FU -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Macros FLASH Exported Macros - * @{ - */ -/** - * @brief Set the FLASH Latency. - * @param __LATENCY__ FLASH Latency - * The value of this parameter depend on device used within the same series - * @retval none - */ -#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__)) - -/** - * @brief Get the FLASH Latency. - * @retval FLASH Latency - * The value of this parameter depend on device used within the same series - */ -#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) - -/** - * @brief Enable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) - -/** - * @brief Disable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) - -/** - * @brief Enable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN) - -/** - * @brief Disable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN)) - -/** - * @brief Enable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN) - -/** - * @brief Disable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN)) - -/** - * @brief Resets the FLASH instruction Cache. - * @note This function must be used only when the Instruction Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \ - FLASH->ACR &= ~FLASH_ACR_ICRST; \ - }while(0U) - -/** - * @brief Resets the FLASH data Cache. - * @note This function must be used only when the data Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \ - FLASH->ACR &= ~FLASH_ACR_DCRST; \ - }while(0U) -/** - * @brief Enable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) - -/** - * @brief Get the specified FLASH flag status. - * @param __FLAG__ specifies the FLASH flags to check. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) - * @arg FLASH_FLAG_BSY : FLASH Busy flag - * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) - -/** - * @brief Clear the specified FLASH flags. - * @param __FLAG__ specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) - * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices - * @retval none - */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) -/** - * @} - */ - -/* Include FLASH HAL Extension module */ -#include "stm32f4xx_hal_flash_ex.h" -#include "stm32f4xx_hal_flash_ramfunc.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_Exported_Functions - * @{ - */ -/** @addtogroup FLASH_Exported_Functions_Group1 - * @{ - */ -/* Program operation functions ***********************************************/ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -/* FLASH IRQ handler method */ -void HAL_FLASH_IRQHandler(void); -/* Callbacks in non blocking modes */ -void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); -void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_FLASH_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_Lock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); -/* Option bytes control */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -uint32_t HAL_FLASH_GetError(void); -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Variables FLASH Private Variables - * @{ - */ - -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Constants FLASH Private Constants - * @{ - */ - -/** - * @brief ACR register byte 0 (Bits[7:0]) base address - */ -#define ACR_BYTE0_ADDRESS 0x40023C00U -/** - * @brief OPTCR register byte 0 (Bits[7:0]) base address - */ -#define OPTCR_BYTE0_ADDRESS 0x40023C14U -/** - * @brief OPTCR register byte 1 (Bits[15:8]) base address - */ -#define OPTCR_BYTE1_ADDRESS 0x40023C15U -/** - * @brief OPTCR register byte 2 (Bits[23:16]) base address - */ -#define OPTCR_BYTE2_ADDRESS 0x40023C16U -/** - * @brief OPTCR register byte 3 (Bits[31:24]) base address - */ -#define OPTCR_BYTE3_ADDRESS 0x40023C17U - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FLASH_Private_Macros FLASH Private Macros - * @{ - */ - -/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters - * @{ - */ -#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \ - ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Functions FLASH Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FLASH_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h deleted file mode 100644 index 1cf8c45..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h +++ /dev/null @@ -1,1063 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ex.h - * @author MCD Application Team - * @brief Header file of FLASH HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FLASH_EX_H -#define __STM32F4xx_HAL_FLASH_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASHEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Erase structure definition - */ -typedef struct -{ - uint32_t TypeErase; /*!< Mass erase or sector Erase. - This parameter can be a value of @ref FLASHEx_Type_Erase */ - - uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled - This parameter must be a value of @ref FLASHEx_Sectors */ - - uint32_t NbSectors; /*!< Number of sectors to be erased. - This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ - - uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism - This parameter must be a value of @ref FLASHEx_Voltage_Range */ - -} FLASH_EraseInitTypeDef; - -/** - * @brief FLASH Option Bytes Program structure definition - */ -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured. - This parameter can be a value of @ref FLASHEx_Option_Type */ - - uint32_t WRPState; /*!< Write protection activation or deactivation. - This parameter can be a value of @ref FLASHEx_WRP_State */ - - uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. - The value of this parameter depend on device used within the same series */ - - uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t RDPLevel; /*!< Set the read protection level. - This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ - - uint32_t BORLevel; /*!< Set the BOR Level. - This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ - - uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */ - -} FLASH_OBProgramInitTypeDef; - -/** - * @brief FLASH Advanced Option Bytes Program structure definition - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured for extension. - This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */ - - uint32_t PCROPState; /*!< PCROP activation or deactivation. - This parameter can be a value of @ref FLASHEx_PCROP_State */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - uint16_t Sectors; /*!< specifies the sector(s) set for PCROP. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\ - STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - - uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - - uint8_t BootConfig; /*!< Specifies Option bytes for boot config. - This parameter can be a value of @ref FLASHEx_Dual_Boot */ - -#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -}FLASH_AdvOBProgramInitTypeDef; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || - STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants - * @{ - */ - -/** @defgroup FLASHEx_Type_Erase FLASH Type Erase - * @{ - */ -#define FLASH_TYPEERASE_SECTORS 0x00000000U /*!< Sectors erase only */ -#define FLASH_TYPEERASE_MASSERASE 0x00000001U /*!< Flash Mass erase activation */ -/** - * @} - */ - -/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range - * @{ - */ -#define FLASH_VOLTAGE_RANGE_1 0x00000000U /*!< Device operating range: 1.8V to 2.1V */ -#define FLASH_VOLTAGE_RANGE_2 0x00000001U /*!< Device operating range: 2.1V to 2.7V */ -#define FLASH_VOLTAGE_RANGE_3 0x00000002U /*!< Device operating range: 2.7V to 3.6V */ -#define FLASH_VOLTAGE_RANGE_4 0x00000003U /*!< Device operating range: 2.7V to 3.6V + External Vpp */ -/** - * @} - */ - -/** @defgroup FLASHEx_WRP_State FLASH WRP State - * @{ - */ -#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired bank 1 sectors */ -#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired bank 1 sectors */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Type FLASH Option Type - * @{ - */ -#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ -#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */ -#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */ -#define OPTIONBYTE_BOR 0x00000008U /*!< BOR option byte configuration */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection - * @{ - */ -#define OB_RDP_LEVEL_0 ((uint8_t)0xAA) -#define OB_RDP_LEVEL_1 ((uint8_t)0x55) -#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 - it s no more possible to go back to level 1 or 0 */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog - * @{ - */ -#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */ -#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP - * @{ - */ -#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */ -#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ -/** - * @} - */ - - -/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY - * @{ - */ -#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ -/** - * @} - */ - -/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level - * @{ - */ -#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */ -#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */ -#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */ -#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup FLASHEx_PCROP_State FLASH PCROP State - * @{ - */ -#define OB_PCROP_STATE_DISABLE 0x00000000U /*!< Disable PCROP */ -#define OB_PCROP_STATE_ENABLE 0x00000001U /*!< Enable PCROP */ -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define OPTIONBYTE_PCROP 0x00000001U /*!< PCROP option byte configuration */ -#define OPTIONBYTE_BOOTCONFIG 0x00000002U /*!< BOOTConfig option byte configuration */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -#define OPTIONBYTE_PCROP 0x00000001U /*!= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \ - (((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END))) - -#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFF000000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xC */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F401xC) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xC */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Functions FLASH Private Functions - * @{ - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange); -void FLASH_FlushCaches(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FLASH_EX_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h deleted file mode 100644 index 05917ec..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h +++ /dev/null @@ -1,76 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ramfunc.h - * @author MCD Application Team - * @brief Header file of FLASH RAMFUNC driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_FLASH_RAMFUNC_H -#define __STM32F4xx_FLASH_RAMFUNC_H - -#ifdef __cplusplus - extern "C" { -#endif -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH_RAMFUNC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_RAMFUNC_Exported_Functions - * @{ - */ - -/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1 - * @{ - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_FLASH_RAMFUNC_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h deleted file mode 100644 index 5f3d749..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h +++ /dev/null @@ -1,325 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio.h - * @author MCD Application Team - * @brief Header file of GPIO HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_GPIO_H -#define __STM32F4xx_HAL_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Types GPIO Exported Types - * @{ - */ - -/** - * @brief GPIO Init structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins_define */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_mode_define */ - - uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. - This parameter can be a value of @ref GPIO_pull_define */ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_speed_define */ - - uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. - This parameter can be a value of @ref GPIO_Alternate_function_selection */ -}GPIO_InitTypeDef; - -/** - * @brief GPIO Bit SET and Bit RESET enumeration - */ -typedef enum -{ - GPIO_PIN_RESET = 0, - GPIO_PIN_SET -}GPIO_PinState; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_pins_define GPIO pins define - * @{ - */ -#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ -#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ -#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ -#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ -#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ -#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ -#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ -#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ -#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ -#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ -#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ -#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ -#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ -#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ -#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ -#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ -#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ - -#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */ -/** - * @} - */ - -/** @defgroup GPIO_mode_define GPIO mode define - * @brief GPIO Configuration Mode - * Elements values convention: 0x00WX00YZ - * - W : EXTI trigger detection on 3 bits - * - X : EXTI mode (IT or Event) on 2 bits - * - Y : Output type (Push Pull or Open Drain) on 1 bit - * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits - * @{ - */ -#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ - -#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ - -#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ - -#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ - -/** - * @} - */ - -/** @defgroup GPIO_speed_define GPIO speed define - * @brief GPIO Output Maximum frequency - * @{ - */ -#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */ -/** - * @} - */ - - /** @defgroup GPIO_pull_define GPIO pull define - * @brief GPIO Pull-Up or Pull-Down Activation - * @{ - */ -#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */ -#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */ -#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** - * @brief Checks whether the specified EXTI line flag is set or not. - * @param __EXTI_LINE__ specifies the EXTI line flag to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending flags. - * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Checks whether the specified EXTI line is asserted or not. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending bits. - * @param __EXTI_LINE__ specifies the EXTI lines to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Generates a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) -/** - * @} - */ - -/* Include GPIO HAL Extension module */ -#include "stm32f4xx_hal_gpio_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_Exported_Functions - * @{ - */ - -/** @addtogroup GPIO_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); -/** - * @} - */ - -/** @addtogroup GPIO_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ -#define GPIO_MODE_Pos 0U -#define GPIO_MODE (0x3UL << GPIO_MODE_Pos) -#define MODE_INPUT (0x0UL << GPIO_MODE_Pos) -#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos) -#define MODE_AF (0x2UL << GPIO_MODE_Pos) -#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos) -#define OUTPUT_TYPE_Pos 4U -#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos) -#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos) -#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos) -#define EXTI_MODE_Pos 16U -#define EXTI_MODE (0x3UL << EXTI_MODE_Pos) -#define EXTI_IT (0x1UL << EXTI_MODE_Pos) -#define EXTI_EVT (0x2UL << EXTI_MODE_Pos) -#define TRIGGER_MODE_Pos 20U -#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos) -#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos) -#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIO_Private_Macros GPIO Private Macros - * @{ - */ -#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) -#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00U) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00U)) -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ - ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ - ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ - ((MODE) == GPIO_MODE_AF_PP) ||\ - ((MODE) == GPIO_MODE_AF_OD) ||\ - ((MODE) == GPIO_MODE_IT_RISING) ||\ - ((MODE) == GPIO_MODE_IT_FALLING) ||\ - ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING) ||\ - ((MODE) == GPIO_MODE_EVT_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_ANALOG)) -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \ - ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH)) -#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ - ((PULL) == GPIO_PULLDOWN)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIO_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_GPIO_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h deleted file mode 100644 index 5e0b7cc..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h +++ /dev/null @@ -1,1590 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio_ex.h - * @author MCD Application Team - * @brief Header file of GPIO HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_GPIO_EX_H -#define __STM32F4xx_HAL_GPIO_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection - * @{ - */ - -/*------------------------------------------ STM32F429xx/STM32F439xx ---------*/ -#if defined(STM32F429xx) || defined(STM32F439xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F427xx/STM32F437xx------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -/** @brief GPIO_Legacy - */ -#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F427xx || STM32F437xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F407xx/STM32F417xx------------------*/ -#if defined(STM32F407xx) || defined(STM32F417xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F405xx/STM32F415xx------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F405xx || STM32F415xx */ - -/*----------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F401xx------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ - - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F401xC || STM32F401xE */ -/*----------------------------------------------------------------------------*/ - -/*--------------- STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-------------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */ -#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ -#define GPIO_AF10_FMC ((uint8_t)0x0A) /* FMC Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -/*----------------------------------------------------------------------------*/ - -/*--------------- STM32F413xx/STM32F423xx-------------------------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_DFSDM2 ((uint8_t)0x03) /* DFSDM2 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF6_DFSDM2 ((uint8_t)0x06) /* DFSDM2 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_SAI1 ((uint8_t)0x07) /* SAI1 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ -#define GPIO_AF7_DFSDM2 ((uint8_t)0x07) /* DFSDM2 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ -#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_SAI1 ((uint8_t)0x0A) /* SAI1 Alternate Function mapping */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF10_DFSDM2 ((uint8_t)0x0A) /* DFSDM2 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ -#define GPIO_AF10_FSMC ((uint8_t)0x0A) /* FSMC Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_UART4 ((uint8_t)0x0B) /* UART4 Alternate Function mapping */ -#define GPIO_AF11_UART5 ((uint8_t)0x0B) /* UART5 Alternate Function mapping */ -#define GPIO_AF11_UART9 ((uint8_t)0x0B) /* UART9 Alternate Function mapping */ -#define GPIO_AF11_UART10 ((uint8_t)0x0B) /* UART10 Alternate Function mapping */ -#define GPIO_AF11_CAN3 ((uint8_t)0x0B) /* CAN3 Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_RNG ((uint8_t)0x0E) /* RNG Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F413xx || STM32F423xx */ - -/*---------------------------------------- STM32F411xx------------------------*/ -#if defined(STM32F411xE) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F411xE */ - -/*---------------------------------------- STM32F410xx------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#if defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#endif /* STM32F410Cx || STM32F410Rx */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1 Alternate Function mapping */ -#if defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#endif /* STM32F410Cx || STM32F410Rx */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/*---------------------------------------- STM32F446xx -----------------------*/ -#if defined(STM32F446xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_CEC ((uint8_t)0x03) /* CEC Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4 Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_UART5 ((uint8_t)0x07) /* UART5 Alternate Function mapping */ -#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_SPDIFRX ((uint8_t)0x07) /* SPDIFRX Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_SPDIFRX ((uint8_t)0x08) /* SPDIFRX Alternate Function mapping */ -#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F469xx/STM32F479xx--------------------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ -#define GPIO_AF13_DSI ((uint8_t)0x0D) /* DSI Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros - * @{ - */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions - * @{ - */ -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Constants GPIO Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Macros GPIO Private Macros - * @{ - */ -/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U : 8U) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U :\ - ((__GPIOx__) == (GPIOI))? 8U :\ - ((__GPIOx__) == (GPIOJ))? 9U : 10U) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U : 7U) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U : 7U) -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U : 7U) -#endif /* STM32F446xx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U : 7U) -#endif /* STM32F412Vx */ -#if defined(STM32F412Rx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U : 7U) -#endif /* STM32F412Rx */ -#if defined(STM32F412Cx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U : 7U) -#endif /* STM32F412Cx */ - -/** - * @} - */ - -/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function - * @{ - */ -/*------------------------- STM32F429xx/STM32F439xx---------------------------*/ -#if defined(STM32F429xx) || defined(STM32F439xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF14_LTDC)) - -#endif /* STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F427xx/STM32F437xx------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1)) - -#endif /* STM32F427xx || STM32F437xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F407xx/STM32F417xx------------------*/ -#if defined(STM32F407xx) || defined(STM32F417xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F405xx/STM32F415xx------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \ - ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F405xx || STM32F415xx */ - -/*----------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F401xx------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF12_SDIO) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM9) || \ - ((AF) == GPIO_AF3_TIM10) || ((AF) == GPIO_AF3_TIM11) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF7_USART1) || \ - ((AF) == GPIO_AF7_USART2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF15_EVENTOUT)) -#endif /* STM32F401xC || STM32F401xE */ -/*----------------------------------------------------------------------------*/ -/*---------------------------------------- STM32F410xx------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_GPIO_AF(AF) (((AF) < 10U) || ((AF) == 15U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/*---------------------------------------- STM32F411xx------------------------*/ -#if defined(STM32F411xE) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \ - ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \ - ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F411xE */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------------------------- STM32F446xx ----------------*/ -#if defined(STM32F446xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \ - ((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \ - ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI)) - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------------------- STM32F469xx/STM32F479xx --------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI) || \ - ((AF) == GPIO_AF9_QSPI) || ((AF) == GPIO_AF10_QSPI)) - -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-----------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 11U) && ((AF) != 14U) && ((AF) != 13U)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/*----------------------------------------------------------------------------*/ - -/*------------------STM32F413xx/STM32F423xx-----------------------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 13U)) -#endif /* STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_GPIO_EX_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h deleted file mode 100644 index 9cd1486..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h +++ /dev/null @@ -1,316 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hcd.h - * @author MCD Application Team - * @brief Header file of HCD HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_HCD_H -#define STM32F4xx_HAL_HCD_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_usb.h" - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup HCD HCD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup HCD_Exported_Types HCD Exported Types - * @{ - */ - -/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition - * @{ - */ -typedef enum -{ - HAL_HCD_STATE_RESET = 0x00, - HAL_HCD_STATE_READY = 0x01, - HAL_HCD_STATE_ERROR = 0x02, - HAL_HCD_STATE_BUSY = 0x03, - HAL_HCD_STATE_TIMEOUT = 0x04 -} HCD_StateTypeDef; - -typedef USB_OTG_GlobalTypeDef HCD_TypeDef; -typedef USB_OTG_CfgTypeDef HCD_InitTypeDef; -typedef USB_OTG_HCTypeDef HCD_HCTypeDef; -typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef; -typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef; -/** - * @} - */ - -/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition - * @{ - */ -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) -typedef struct __HCD_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ -{ - HCD_TypeDef *Instance; /*!< Register base address */ - HCD_InitTypeDef Init; /*!< HCD required parameters */ - HCD_HCTypeDef hc[16]; /*!< Host channels parameters */ - HAL_LockTypeDef Lock; /*!< HCD peripheral status */ - __IO HCD_StateTypeDef State; /*!< HCD communication state */ - __IO uint32_t ErrorCode; /*!< HCD Error code */ - void *pData; /*!< Pointer Stack Handler */ -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - void (* SOFCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD SOF callback */ - void (* ConnectCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Connect callback */ - void (* DisconnectCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Disconnect callback */ - void (* PortEnabledCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Port Enable callback */ - void (* PortDisabledCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Port Disable callback */ - void (* HC_NotifyURBChangeCallback)(struct __HCD_HandleTypeDef *hhcd, uint8_t chnum, - HCD_URBStateTypeDef urb_state); /*!< USB OTG HCD Host Channel Notify URB Change callback */ - - void (* MspInitCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Msp Init callback */ - void (* MspDeInitCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Msp DeInit callback */ -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ -} HCD_HandleTypeDef; -/** - * @} - */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup HCD_Exported_Constants HCD Exported Constants - * @{ - */ - -/** @defgroup HCD_Speed HCD Speed - * @{ - */ -#define HCD_SPEED_HIGH USBH_HS_SPEED -#define HCD_SPEED_FULL USBH_FSLS_SPEED -#define HCD_SPEED_LOW USBH_FSLS_SPEED -/** - * @} - */ - -/** @defgroup HCD_Device_Speed HCD Device Speed - * @{ - */ -#define HCD_DEVICE_SPEED_HIGH 0U -#define HCD_DEVICE_SPEED_FULL 1U -#define HCD_DEVICE_SPEED_LOW 2U -/** - * @} - */ - -/** @defgroup HCD_PHY_Module HCD PHY Module - * @{ - */ -#define HCD_PHY_ULPI 1U -#define HCD_PHY_EMBEDDED 2U -/** - * @} - */ - -/** @defgroup HCD_Error_Code_definition HCD Error Code definition - * @brief HCD Error Code definition - * @{ - */ -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) -#define HAL_HCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup HCD_Exported_Macros HCD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ -#define __HAL_HCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_HCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) - -#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance)\ - & (__INTERRUPT__)) == (__INTERRUPT__)) -#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__)) -#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) - -#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__)) -#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM) -#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM) -#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM) -#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup HCD_Exported_Functions HCD Exported Functions - * @{ - */ - -/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd); -HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd); -HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num, - uint8_t epnum, uint8_t dev_address, - uint8_t speed, uint8_t ep_type, uint16_t mps); - -HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num); -void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd); -void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd); - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) -/** @defgroup HAL_HCD_Callback_ID_enumeration_definition HAL USB OTG HCD Callback ID enumeration definition - * @brief HAL USB OTG HCD Callback ID enumeration definition - * @{ - */ -typedef enum -{ - HAL_HCD_SOF_CB_ID = 0x01, /*!< USB HCD SOF callback ID */ - HAL_HCD_CONNECT_CB_ID = 0x02, /*!< USB HCD Connect callback ID */ - HAL_HCD_DISCONNECT_CB_ID = 0x03, /*!< USB HCD Disconnect callback ID */ - HAL_HCD_PORT_ENABLED_CB_ID = 0x04, /*!< USB HCD Port Enable callback ID */ - HAL_HCD_PORT_DISABLED_CB_ID = 0x05, /*!< USB HCD Port Disable callback ID */ - - HAL_HCD_MSPINIT_CB_ID = 0x06, /*!< USB HCD MspInit callback ID */ - HAL_HCD_MSPDEINIT_CB_ID = 0x07 /*!< USB HCD MspDeInit callback ID */ - -} HAL_HCD_CallbackIDTypeDef; -/** - * @} - */ - -/** @defgroup HAL_HCD_Callback_pointer_definition HAL USB OTG HCD Callback pointer definition - * @brief HAL USB OTG HCD Callback pointer definition - * @{ - */ - -typedef void (*pHCD_CallbackTypeDef)(HCD_HandleTypeDef *hhcd); /*!< pointer to a common USB OTG HCD callback function */ -typedef void (*pHCD_HC_NotifyURBChangeCallbackTypeDef)(HCD_HandleTypeDef *hhcd, - uint8_t epnum, - HCD_URBStateTypeDef urb_state); /*!< pointer to USB OTG HCD host channel callback */ -/** - * @} - */ - -HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, - HAL_HCD_CallbackIDTypeDef CallbackID, - pHCD_CallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, - HAL_HCD_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, - pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* I/O operation functions ***************************************************/ -/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, uint8_t ch_num, - uint8_t direction, uint8_t ep_type, - uint8_t token, uint8_t *pbuff, - uint16_t length, uint8_t do_ping); - -/* Non-Blocking mode: Interrupt */ -void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd); -void HAL_HCD_WKUP_IRQHandler(HCD_HandleTypeDef *hhcd); -void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd); -void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd); -void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd); -void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd); -void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd); -void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, - HCD_URBStateTypeDef urb_state); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ -/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd); -HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd); -HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd); -HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum); -HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum); -uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum); -uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd); -uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd); - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup HCD_Private_Macros HCD Private Macros - * @{ - */ -/** - * @} - */ -/* Private functions prototypes ----------------------------------------------*/ - -/** - * @} - */ -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_HCD_H */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h deleted file mode 100644 index 9a7a67e..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h +++ /dev/null @@ -1,741 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c.h - * @author MCD Application Team - * @brief Header file of I2C HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2C_H -#define __STM32F4xx_HAL_I2C_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2C_Exported_Types I2C Exported Types - * @{ - */ - -/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition - * @brief I2C Configuration Structure definition - * @{ - */ -typedef struct -{ - uint32_t ClockSpeed; /*!< Specifies the clock frequency. - This parameter must be set to a value lower than 400kHz */ - - uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. - This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref I2C_addressing_mode */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref I2C_dual_addressing_mode */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref I2C_general_call_addressing_mode */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref I2C_nostretch_mode */ - -} I2C_InitTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_state_structure_definition HAL state structure definition - * @brief HAL State structure definition - * @note HAL I2C State value coding follow below described bitmap : - * b7-b6 Error information - * 00 : No Error - * 01 : Abort (Abort user request on going) - * 10 : Timeout - * 11 : Error - * b5 Peripheral initialization status - * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral initialized and ready to use. HAL I2C Init function called) - * b4 (not used) - * x : Should be set to 0 - * b3 - * 0 : Ready or Busy (No Listen mode ongoing) - * 1 : Listen (Peripheral in Address Listen Mode) - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (Peripheral busy with some configuration or internal operations) - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * @{ - */ -typedef enum -{ - HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ - HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ - HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ - HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ - HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ - HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ - HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission - process is ongoing */ - HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception - process is ongoing */ - HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ - HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ - HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ - -} HAL_I2C_StateTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_mode_structure_definition HAL mode structure definition - * @brief HAL Mode structure definition - * @note HAL I2C Mode value coding follow below described bitmap :\n - * b7 (not used)\n - * x : Should be set to 0\n - * b6\n - * 0 : None\n - * 1 : Memory (HAL I2C communication is in Memory Mode)\n - * b5\n - * 0 : None\n - * 1 : Slave (HAL I2C communication is in Slave Mode)\n - * b4\n - * 0 : None\n - * 1 : Master (HAL I2C communication is in Master Mode)\n - * b3-b2-b1-b0 (not used)\n - * xxxx : Should be set to 0000 - * @{ - */ -typedef enum -{ - HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ - HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ - HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ - HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ - -} HAL_I2C_ModeTypeDef; - -/** - * @} - */ - -/** @defgroup I2C_Error_Code_definition I2C Error Code definition - * @brief I2C Error Code definition - * @{ - */ -#define HAL_I2C_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_I2C_ERROR_BERR 0x00000001U /*!< BERR error */ -#define HAL_I2C_ERROR_ARLO 0x00000002U /*!< ARLO error */ -#define HAL_I2C_ERROR_AF 0x00000004U /*!< AF error */ -#define HAL_I2C_ERROR_OVR 0x00000008U /*!< OVR error */ -#define HAL_I2C_ERROR_DMA 0x00000010U /*!< DMA transfer error */ -#define HAL_I2C_ERROR_TIMEOUT 0x00000020U /*!< Timeout Error */ -#define HAL_I2C_ERROR_SIZE 0x00000040U /*!< Size Management error */ -#define HAL_I2C_ERROR_DMA_PARAM 0x00000080U /*!< DMA Parameter Error */ -#define HAL_I2C_WRONG_START 0x00000200U /*!< Wrong start Error */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -#define HAL_I2C_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid Callback error */ -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition - * @brief I2C handle Structure definition - * @{ - */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -typedef struct __I2C_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -{ - I2C_TypeDef *Instance; /*!< I2C registers base address */ - - I2C_InitTypeDef Init; /*!< I2C communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ - - uint16_t XferSize; /*!< I2C transfer size */ - - __IO uint16_t XferCount; /*!< I2C transfer counter */ - - __IO uint32_t XferOptions; /*!< I2C transfer options */ - - __IO uint32_t PreviousState; /*!< I2C communication Previous state and mode - context for internal usage */ - - DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< I2C locking object */ - - __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ - - __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ - - __IO uint32_t ErrorCode; /*!< I2C Error code */ - - __IO uint32_t Devaddress; /*!< I2C Target device address */ - - __IO uint32_t Memaddress; /*!< I2C Target memory address */ - - __IO uint32_t MemaddSize; /*!< I2C Target memory address size */ - - __IO uint32_t EventCount; /*!< I2C Event counter */ - - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ - void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */ - void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */ - void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */ - void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */ - void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */ - void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */ - void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */ - void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */ - - void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */ - - void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */ - void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */ - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -} I2C_HandleTypeDef; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -/** - * @brief HAL I2C Callback ID enumeration definition - */ -typedef enum -{ - HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ - HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ - HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ - HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ - HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ - HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ - HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ - HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ - HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ - - HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ - HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ - -} HAL_I2C_CallbackIDTypeDef; - -/** - * @brief HAL I2C Callback pointer definition - */ -typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */ -typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode - * @{ - */ -#define I2C_DUTYCYCLE_2 0x00000000U -#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY -/** - * @} - */ - -/** @defgroup I2C_addressing_mode I2C addressing mode - * @{ - */ -#define I2C_ADDRESSINGMODE_7BIT 0x00004000U -#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | 0x00004000U) -/** - * @} - */ - -/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode - * @{ - */ -#define I2C_DUALADDRESS_DISABLE 0x00000000U -#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL -/** - * @} - */ - -/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode - * @{ - */ -#define I2C_GENERALCALL_DISABLE 0x00000000U -#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC -/** - * @} - */ - -/** @defgroup I2C_nostretch_mode I2C nostretch mode - * @{ - */ -#define I2C_NOSTRETCH_DISABLE 0x00000000U -#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size - * @{ - */ -#define I2C_MEMADD_SIZE_8BIT 0x00000001U -#define I2C_MEMADD_SIZE_16BIT 0x00000010U -/** - * @} - */ - -/** @defgroup I2C_XferDirection_definition I2C XferDirection definition - * @{ - */ -#define I2C_DIRECTION_RECEIVE 0x00000000U -#define I2C_DIRECTION_TRANSMIT 0x00000001U -/** - * @} - */ - -/** @defgroup I2C_XferOptions_definition I2C XferOptions definition - * @{ - */ -#define I2C_FIRST_FRAME 0x00000001U -#define I2C_FIRST_AND_NEXT_FRAME 0x00000002U -#define I2C_NEXT_FRAME 0x00000004U -#define I2C_FIRST_AND_LAST_FRAME 0x00000008U -#define I2C_LAST_FRAME_NO_STOP 0x00000010U -#define I2C_LAST_FRAME 0x00000020U - -/* List of XferOptions in usage of : - * 1- Restart condition in all use cases (direction change or not) - */ -#define I2C_OTHER_FRAME (0x00AA0000U) -#define I2C_OTHER_AND_LAST_FRAME (0xAA000000U) -/** - * @} - */ - -/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition - * @brief I2C Interrupt definition - * Elements values convention: 0xXXXXXXXX - * - XXXXXXXX : Interrupt control mask - * @{ - */ -#define I2C_IT_BUF I2C_CR2_ITBUFEN -#define I2C_IT_EVT I2C_CR2_ITEVTEN -#define I2C_IT_ERR I2C_CR2_ITERREN -/** - * @} - */ - -/** @defgroup I2C_Flag_definition I2C Flag definition - * @{ - */ - -#define I2C_FLAG_OVR 0x00010800U -#define I2C_FLAG_AF 0x00010400U -#define I2C_FLAG_ARLO 0x00010200U -#define I2C_FLAG_BERR 0x00010100U -#define I2C_FLAG_TXE 0x00010080U -#define I2C_FLAG_RXNE 0x00010040U -#define I2C_FLAG_STOPF 0x00010010U -#define I2C_FLAG_ADD10 0x00010008U -#define I2C_FLAG_BTF 0x00010004U -#define I2C_FLAG_ADDR 0x00010002U -#define I2C_FLAG_SB 0x00010001U -#define I2C_FLAG_DUALF 0x00100080U -#define I2C_FLAG_GENCALL 0x00100010U -#define I2C_FLAG_TRA 0x00100004U -#define I2C_FLAG_BUSY 0x00100002U -#define I2C_FLAG_MSL 0x00100001U -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Macros I2C Exported Macros - * @{ - */ - -/** @brief Reset I2C handle state. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) -#endif - -/** @brief Enable or disable the specified I2C interrupts. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg I2C_IT_BUF: Buffer interrupt enable - * @arg I2C_IT_EVT: Event interrupt enable - * @arg I2C_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)) -#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) - -/** @brief Checks if the specified I2C interrupt source is enabled or disabled. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the I2C interrupt source to check. - * This parameter can be one of the following values: - * @arg I2C_IT_BUF: Buffer interrupt enable - * @arg I2C_IT_EVT: Event interrupt enable - * @arg I2C_IT_ERR: Error interrupt enable - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified I2C flag is set or not. - * @param __HANDLE__ specifies the I2C Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2C_FLAG_OVR: Overrun/Underrun flag - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag - * @arg I2C_FLAG_BERR: Bus error flag - * @arg I2C_FLAG_TXE: Data register empty flag - * @arg I2C_FLAG_RXNE: Data register not empty flag - * @arg I2C_FLAG_STOPF: Stop detection flag - * @arg I2C_FLAG_ADD10: 10-bit header sent flag - * @arg I2C_FLAG_BTF: Byte transfer finished flag - * @arg I2C_FLAG_ADDR: Address sent flag - * Address matched flag - * @arg I2C_FLAG_SB: Start bit flag - * @arg I2C_FLAG_DUALF: Dual flag - * @arg I2C_FLAG_GENCALL: General call header flag - * @arg I2C_FLAG_TRA: Transmitter/Receiver flag - * @arg I2C_FLAG_BUSY: Bus busy flag - * @arg I2C_FLAG_MSL: Master/Slave flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U) ? \ - (((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) : \ - (((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)) - -/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit. - * @param __HANDLE__ specifies the I2C Handle. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * @retval None - */ -#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK)) - -/** @brief Clears the I2C ADDR pending flag. - * @param __HANDLE__ specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @retval None - */ -#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg = 0x00U; \ - tmpreg = (__HANDLE__)->Instance->SR1; \ - tmpreg = (__HANDLE__)->Instance->SR2; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clears the I2C STOPF pending flag. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg = 0x00U; \ - tmpreg = (__HANDLE__)->Instance->SR1; \ - SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE); \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Enable the specified I2C peripheral. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE) - -/** @brief Disable the specified I2C peripheral. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE) - -/** - * @} - */ - -/* Include I2C HAL Extension module */ -#include "stm32f4xx_hal_i2c_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2C_Exported_Functions - * @{ - */ - -/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions******************************/ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -/* IO operation functions ****************************************************/ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); - -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); - -/******* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -/** - * @} - */ - -/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ -/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); -void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @{ - */ -/* Peripheral State, Mode and Error functions *********************************/ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Constants I2C Private Constants - * @{ - */ -#define I2C_FLAG_MASK 0x0000FFFFU -#define I2C_MIN_PCLK_FREQ_STANDARD 2000000U /*!< 2 MHz */ -#define I2C_MIN_PCLK_FREQ_FAST 4000000U /*!< 4 MHz */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2C_Private_Macros I2C Private Macros - * @{ - */ - -#define I2C_MIN_PCLK_FREQ(__PCLK__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__PCLK__) < I2C_MIN_PCLK_FREQ_STANDARD) : ((__PCLK__) < I2C_MIN_PCLK_FREQ_FAST)) -#define I2C_CCR_CALCULATION(__PCLK__, __SPEED__, __COEFF__) (((((__PCLK__) - 1U)/((__SPEED__) * (__COEFF__))) + 1U) & I2C_CCR_CCR) -#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U) -#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U)) -#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) ((I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U) < 4U)? 4U:I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U)) -#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 3U) : (I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 25U) | I2C_DUTYCYCLE_16_9)) -#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \ - ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \ - ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS)) - -#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (uint8_t)(~I2C_OAR1_ADD0))) -#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0)) - -#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF))) -#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)0x00F0))) -#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)(0x00F1)))) - -#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0xFF00)) >> 8))) -#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF))) - -/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters - * @{ - */ -#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \ - ((CYCLE) == I2C_DUTYCYCLE_16_9)) -#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \ - ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT)) -#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) -#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ - ((CALL) == I2C_GENERALCALL_ENABLE)) -#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ - ((STRETCH) == I2C_NOSTRETCH_ENABLE)) -#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ - ((SIZE) == I2C_MEMADD_SIZE_16BIT)) -#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0U) && ((SPEED) <= 400000U)) -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & 0xFFFFFC00U) == 0U) -#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & 0xFFFFFF01U) == 0U) -#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ - ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ - ((REQUEST) == I2C_NEXT_FRAME) || \ - ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ - ((REQUEST) == I2C_LAST_FRAME) || \ - ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ - IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) - -#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ - ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) - -#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) -#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_I2C_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h deleted file mode 100644 index 31ad99c..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h +++ /dev/null @@ -1,115 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c_ex.h - * @author MCD Application Team - * @brief Header file of I2C HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2C_EX_H -#define __STM32F4xx_HAL_I2C_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2CEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2CEx_Analog_Filter I2C Analog Filter - * @{ - */ -#define I2C_ANALOGFILTER_ENABLE 0x00000000U -#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2CEx_Exported_Functions - * @{ - */ - -/** @addtogroup I2CEx_Exported_Functions_Group1 - * @{ - */ -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Constants I2C Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Macros I2C Private Macros - * @{ - */ -#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ - ((FILTER) == I2C_ANALOGFILTER_DISABLE)) -#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_I2C_EX_H */ - - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h deleted file mode 100644 index 66cee01..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h +++ /dev/null @@ -1,618 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2s.h - * @author MCD Application Team - * @brief Header file of I2S HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_I2S_H -#define STM32F4xx_HAL_I2S_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2S - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2S_Exported_Types I2S Exported Types - * @{ - */ - -/** - * @brief I2S Init structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Specifies the I2S operating mode. - This parameter can be a value of @ref I2S_Mode */ - - uint32_t Standard; /*!< Specifies the standard used for the I2S communication. - This parameter can be a value of @ref I2S_Standard */ - - uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. - This parameter can be a value of @ref I2S_Data_Format */ - - uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. - This parameter can be a value of @ref I2S_MCLK_Output */ - - uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. - This parameter can be a value of @ref I2S_Audio_Frequency */ - - uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. - This parameter can be a value of @ref I2S_Clock_Polarity */ - - uint32_t ClockSource; /*!< Specifies the I2S Clock Source. - This parameter can be a value of @ref I2S_Clock_Source */ - uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode. - This parameter can be a value of @ref I2S_FullDuplex_Mode */ -} I2S_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */ - HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */ - HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */ - HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ - HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ - HAL_I2S_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ - HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */ - HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */ -} HAL_I2S_StateTypeDef; - -/** - * @brief I2S handle Structure definition - */ -typedef struct __I2S_HandleTypeDef -{ - SPI_TypeDef *Instance; /*!< I2S registers base address */ - - I2S_InitTypeDef Init; /*!< I2S communication parameters */ - - uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ - - __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ - - __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ - - uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ - - __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ - - __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter - (This field is initialized at the - same value as transfer size at the - beginning of the transfer and - decremented when a sample is received - NbSamplesReceived = RxBufferSize-RxBufferCount) */ - void (*IrqHandlerISR)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S function pointer on IrqHandler */ - - DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ - - __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ - - __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ - - __IO uint32_t ErrorCode; /*!< I2S Error code - This parameter can be a value of @ref I2S_Error */ - -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */ - void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */ - void (* TxRxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S TxRx Completed callback */ - void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */ - void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */ - void (* TxRxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S TxRx Half Completed callback */ - void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */ - void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */ - void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */ - -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} I2S_HandleTypeDef; - -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) -/** - * @brief HAL I2S Callback ID enumeration definition - */ -typedef enum -{ - HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */ - HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */ - HAL_I2S_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< I2S TxRx Completed callback ID */ - HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */ - HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */ - HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< I2S TxRx Half Completed callback ID */ - HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */ - HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */ - HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */ - -} HAL_I2S_CallbackIDTypeDef; - -/** - * @brief HAL I2S Callback pointer definition - */ -typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */ - -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2S_Exported_Constants I2S Exported Constants - * @{ - */ -/** @defgroup I2S_Error I2S Error - * @{ - */ -#define HAL_I2S_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_I2S_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */ -#define HAL_I2S_ERROR_OVR (0x00000002U) /*!< OVR error */ -#define HAL_I2S_ERROR_UDR (0x00000004U) /*!< UDR error */ -#define HAL_I2S_ERROR_DMA (0x00000008U) /*!< DMA transfer error */ -#define HAL_I2S_ERROR_PRESCALER (0x00000010U) /*!< Prescaler Calculation error */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) -#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid Callback error */ -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -#define HAL_I2S_ERROR_BUSY_LINE_RX (0x00000040U) /*!< Busy Rx Line error */ -/** - * @} - */ - -/** @defgroup I2S_Mode I2S Mode - * @{ - */ -#define I2S_MODE_SLAVE_TX (0x00000000U) -#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) -#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) -#define I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)) -/** - * @} - */ - -/** @defgroup I2S_Standard I2S Standard - * @{ - */ -#define I2S_STANDARD_PHILIPS (0x00000000U) -#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) -#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) -#define I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)) -#define I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)) -/** - * @} - */ - -/** @defgroup I2S_Data_Format I2S Data Format - * @{ - */ -#define I2S_DATAFORMAT_16B (0x00000000U) -#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) -#define I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) -#define I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) -/** - * @} - */ - -/** @defgroup I2S_MCLK_Output I2S MCLK Output - * @{ - */ -#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE) -#define I2S_MCLKOUTPUT_DISABLE (0x00000000U) -/** - * @} - */ - -/** @defgroup I2S_Audio_Frequency I2S Audio Frequency - * @{ - */ -#define I2S_AUDIOFREQ_192K (192000U) -#define I2S_AUDIOFREQ_96K (96000U) -#define I2S_AUDIOFREQ_48K (48000U) -#define I2S_AUDIOFREQ_44K (44100U) -#define I2S_AUDIOFREQ_32K (32000U) -#define I2S_AUDIOFREQ_22K (22050U) -#define I2S_AUDIOFREQ_16K (16000U) -#define I2S_AUDIOFREQ_11K (11025U) -#define I2S_AUDIOFREQ_8K (8000U) -#define I2S_AUDIOFREQ_DEFAULT (2U) -/** - * @} - */ - -/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode - * @{ - */ -#define I2S_FULLDUPLEXMODE_DISABLE (0x00000000U) -#define I2S_FULLDUPLEXMODE_ENABLE (0x00000001U) -/** - * @} - */ - -/** @defgroup I2S_Clock_Polarity I2S Clock Polarity - * @{ - */ -#define I2S_CPOL_LOW (0x00000000U) -#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL) -/** - * @} - */ - -/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition - * @{ - */ -#define I2S_IT_TXE SPI_CR2_TXEIE -#define I2S_IT_RXNE SPI_CR2_RXNEIE -#define I2S_IT_ERR SPI_CR2_ERRIE -/** - * @} - */ - -/** @defgroup I2S_Flags_Definition I2S Flags Definition - * @{ - */ -#define I2S_FLAG_TXE SPI_SR_TXE -#define I2S_FLAG_RXNE SPI_SR_RXNE - -#define I2S_FLAG_UDR SPI_SR_UDR -#define I2S_FLAG_OVR SPI_SR_OVR -#define I2S_FLAG_FRE SPI_SR_FRE - -#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE -#define I2S_FLAG_BSY SPI_SR_BSY - -#define I2S_FLAG_MASK (SPI_SR_RXNE\ - | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY) -/** - * @} - */ - -/** @defgroup I2S_Clock_Source I2S Clock Source Definition - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || defined(STM32F479xx) -#define I2S_CLOCK_PLL (0x00000000U) -#define I2S_CLOCK_EXTERNAL (0x00000001U) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define I2S_CLOCK_PLL (0x00000000U) -#define I2S_CLOCK_EXTERNAL (0x00000001U) -#define I2S_CLOCK_PLLR (0x00000002U) -#define I2S_CLOCK_PLLSRC (0x00000003U) -#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define I2S_CLOCK_PLLSRC (0x00000000U) -#define I2S_CLOCK_EXTERNAL (0x00000001U) -#define I2S_CLOCK_PLLR (0x00000002U) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup I2S_Exported_macros I2S Exported Macros - * @{ - */ - -/** @brief Reset I2S handle state - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) -#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_I2S_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - -/** @brief Enable the specified SPI peripheral (in I2S mode). - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) - -/** @brief Disable the specified SPI peripheral (in I2S mode). - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) - -/** @brief Enable the specified I2S interrupts. - * @param __HANDLE__ specifies the I2S Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) - -/** @brief Disable the specified I2S interrupts. - * @param __HANDLE__ specifies the I2S Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) - -/** @brief Checks if the specified I2S interrupt source is enabled or disabled. - * @param __HANDLE__ specifies the I2S Handle. - * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. - * @param __INTERRUPT__ specifies the I2S interrupt source to check. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ - & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified I2S flag is set or not. - * @param __HANDLE__ specifies the I2S Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2S_FLAG_RXNE: Receive buffer not empty flag - * @arg I2S_FLAG_TXE: Transmit buffer empty flag - * @arg I2S_FLAG_UDR: Underrun flag - * @arg I2S_FLAG_OVR: Overrun flag - * @arg I2S_FLAG_FRE: Frame error flag - * @arg I2S_FLAG_CHSIDE: Channel Side flag - * @arg I2S_FLAG_BSY: Busy flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the I2S OVR pending flag. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \ - __IO uint32_t tmpreg_ovr = 0x00U; \ - tmpreg_ovr = (__HANDLE__)->Instance->DR; \ - tmpreg_ovr = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg_ovr); \ - }while(0U) -/** @brief Clears the I2S UDR pending flag. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\ - __IO uint32_t tmpreg_udr = 0x00U;\ - tmpreg_udr = ((__HANDLE__)->Instance->SR);\ - UNUSED(tmpreg_udr); \ - }while(0U) -/** @brief Flush the I2S DR Register. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_FLUSH_RX_DR(__HANDLE__) do{\ - __IO uint32_t tmpreg_dr = 0x00U;\ - tmpreg_dr = ((__HANDLE__)->Instance->DR);\ - UNUSED(tmpreg_dr); \ - }while(0U) -/** - * @} - */ - -/* Include I2S Extension module */ -#include "stm32f4xx_hal_i2s_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2S_Exported_Functions - * @{ - */ - -/** @addtogroup I2S_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); -HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s); -void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); -void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) -HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, - pI2S_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup I2S_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); -void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); -HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); -HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); - -/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ -void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); -/** - * @} - */ - -/** @addtogroup I2S_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control and State functions ************************************/ -HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); -uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2S_Private_Macros I2S Private Macros - * @{ - */ - -/** @brief Check whether the specified SPI flag is set or not. - * @param __SR__ copy of I2S SR register. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2S_FLAG_RXNE: Receive buffer not empty flag - * @arg I2S_FLAG_TXE: Transmit buffer empty flag - * @arg I2S_FLAG_UDR: Underrun error flag - * @arg I2S_FLAG_OVR: Overrun flag - * @arg I2S_FLAG_CHSIDE: Channel side flag - * @arg I2S_FLAG_BSY: Busy flag - * @retval SET or RESET. - */ -#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\ - & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET) - -/** @brief Check whether the specified SPI Interrupt is set or not. - * @param __CR2__ copy of I2S CR2 register. - * @param __INTERRUPT__ specifies the SPI interrupt source to check. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval SET or RESET. - */ -#define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__)\ - & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks if I2S Mode parameter is in allowed range. - * @param __MODE__ specifies the I2S Mode. - * This parameter can be a value of @ref I2S_Mode - * @retval None - */ -#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \ - ((__MODE__) == I2S_MODE_SLAVE_RX) || \ - ((__MODE__) == I2S_MODE_MASTER_TX) || \ - ((__MODE__) == I2S_MODE_MASTER_RX)) - -#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \ - ((__STANDARD__) == I2S_STANDARD_MSB) || \ - ((__STANDARD__) == I2S_STANDARD_LSB) || \ - ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \ - ((__STANDARD__) == I2S_STANDARD_PCM_LONG)) - -#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \ - ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \ - ((__FORMAT__) == I2S_DATAFORMAT_24B) || \ - ((__FORMAT__) == I2S_DATAFORMAT_32B)) - -#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \ - ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE)) - -#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \ - ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \ - ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT)) - -#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \ - ((MODE) == I2S_FULLDUPLEXMODE_ENABLE)) - -/** @brief Checks if I2S Serial clock steady state parameter is in allowed range. - * @param __CPOL__ specifies the I2S serial clock steady state. - * This parameter can be a value of @ref I2S_Clock_Polarity - * @retval None - */ -#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \ - ((__CPOL__) == I2S_CPOL_HIGH)) - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\ - ((CLOCK) == I2S_CLOCK_PLL)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined (STM32F413xx) || defined(STM32F423xx) -#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\ - ((CLOCK) == I2S_CLOCK_PLL) ||\ - ((CLOCK) == I2S_CLOCK_PLLSRC) ||\ - ((CLOCK) == I2S_CLOCK_PLLR)) -#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\ - ((CLOCK) == I2S_CLOCK_PLLSRC) ||\ - ((CLOCK) == I2S_CLOCK_PLLR)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_I2S_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h deleted file mode 100644 index 3aaa45b..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h +++ /dev/null @@ -1,183 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2s_ex.h - * @author MCD Application Team - * @brief Header file of I2S HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_I2S_EX_H -#define STM32F4xx_HAL_I2S_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined(SPI_I2S_FULLDUPLEX_SUPPORT) -/** @addtogroup I2SEx I2SEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup I2SEx_Exported_Macros I2S Extended Exported Macros - * @{ - */ - -#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE)) - -/** @brief Enable or disable the specified I2SExt peripheral. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2SEXT_ENABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE) -#define __HAL_I2SEXT_DISABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE) - -/** @brief Enable or disable the specified I2SExt interrupts. - * @param __HANDLE__ specifies the I2S Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_I2SEXT_ENABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 |= (__INTERRUPT__)) -#define __HAL_I2SEXT_DISABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 &= ~(__INTERRUPT__)) - -/** @brief Checks if the specified I2SExt interrupt source is enabled or disabled. - * @param __HANDLE__ specifies the I2S Handle. - * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. - * @param __INTERRUPT__ specifies the I2S interrupt source to check. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_I2SEXT_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((I2SxEXT((__HANDLE__)->Instance)->CR2\ - & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified I2SExt flag is set or not. - * @param __HANDLE__ specifies the I2S Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2S_FLAG_RXNE: Receive buffer not empty flag - * @arg I2S_FLAG_TXE: Transmit buffer empty flag - * @arg I2S_FLAG_UDR: Underrun flag - * @arg I2S_FLAG_OVR: Overrun flag - * @arg I2S_FLAG_FRE: Frame error flag - * @arg I2S_FLAG_CHSIDE: Channel Side flag - * @arg I2S_FLAG_BSY: Busy flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_I2SEXT_GET_FLAG(__HANDLE__, __FLAG__) (((I2SxEXT((__HANDLE__)->Instance)->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the I2SExt OVR pending flag. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2SEXT_CLEAR_OVRFLAG(__HANDLE__) do{ \ - __IO uint32_t tmpreg_ovr = 0x00U; \ - tmpreg_ovr = I2SxEXT((__HANDLE__)->Instance)->DR;\ - tmpreg_ovr = I2SxEXT((__HANDLE__)->Instance)->SR;\ - UNUSED(tmpreg_ovr); \ - }while(0U) -/** @brief Clears the I2SExt UDR pending flag. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2SEXT_CLEAR_UDRFLAG(__HANDLE__) do{ \ - __IO uint32_t tmpreg_udr = 0x00U; \ - tmpreg_udr = I2SxEXT((__HANDLE__)->Instance)->SR;\ - UNUSED(tmpreg_udr); \ - }while(0U) -/** @brief Flush the I2S and I2SExt DR Registers. - * @param __HANDLE__ specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2SEXT_FLUSH_RX_DR(__HANDLE__) do{ \ - __IO uint32_t tmpreg_dr = 0x00U; \ - tmpreg_dr = I2SxEXT((__HANDLE__)->Instance)->DR; \ - tmpreg_dr = ((__HANDLE__)->Instance->DR); \ - UNUSED(tmpreg_dr); \ - }while(0U) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2SEx_Exported_Functions I2S Extended Exported Functions - * @{ - */ - -/** @addtogroup I2SEx_Exported_Functions_Group1 I2S Extended IO operation functions - * @{ - */ - -/* Extended features functions *************************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, - uint16_t Size, uint32_t Timeout); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, - uint16_t Size); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, - uint16_t Size); -/* I2S IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_I2SEx_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s); -void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_I2S_EX_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h deleted file mode 100644 index d97f255..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h +++ /dev/null @@ -1,427 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr.h - * @author MCD Application Team - * @brief Header file of PWR HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PWR_H -#define __STM32F4xx_HAL_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Types PWR Exported Types - * @{ - */ - -/** - * @brief PWR PVD configuration structure definition - */ -typedef struct -{ - uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. - This parameter can be a value of @ref PWR_PVD_detection_level */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWR_PVD_Mode */ -}PWR_PVDTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWR_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins - * @{ - */ -#define PWR_WAKEUP_PIN1 0x00000100U -/** - * @} - */ - -/** @defgroup PWR_PVD_detection_level PWR PVD detection level - * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 -#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 -#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 -#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 -#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 -#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 -#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 -#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage - (Compare internally to VREFINT) */ -/** - * @} - */ - -/** @defgroup PWR_PVD_Mode PWR PVD Mode - * @{ - */ -#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */ -#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - - -/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode - * @{ - */ -#define PWR_MAINREGULATOR_ON 0x00000000U -#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS -/** - * @} - */ - -/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry - * @{ - */ -#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) -#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry - * @{ - */ -#define PWR_STOPENTRY_WFI ((uint8_t)0x01) -#define PWR_STOPENTRY_WFE ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup PWR_Flag PWR Flag - * @{ - */ -#define PWR_FLAG_WU PWR_CSR_WUF -#define PWR_FLAG_SB PWR_CSR_SBF -#define PWR_FLAG_PVDO PWR_CSR_PVDO -#define PWR_FLAG_BRR PWR_CSR_BRR -#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macro PWR Exported Macro - * @{ - */ - -/** @brief Check PWR flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event - * was received from the WKUP pin or from the RTC alarm (Alarm A - * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup. - * An additional wakeup event is detected if the WKUP pin is enabled - * (by setting the EWUP bit) when the WKUP pin level is already high. - * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was - * resumed from StandBy mode. - * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled - * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode - * For this reason, this bit is equal to 0 after Standby or reset - * until the PVDE bit is set. - * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset - * when the device wakes up from Standby mode or by a system reset - * or power reset. - * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage - * scaling output selection is ready. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the PWR's pending flags. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U) - -/** - * @brief Enable the PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) - -/** - * @brief Disable the PVD EXTI Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) - -/** - * @brief Enable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) - -/** - * @brief Disable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) - -/** - * @brief Enable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief Disable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief PVD EXTI line configuration: set rising & falling edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\ - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\ - }while(0U) - -/** - * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. - * This parameter can be: - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\ - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\ - }while(0U) - -/** - * @brief checks whether the specified PVD Exti interrupt flag is set or not. - * @retval EXTI PVD Line Status. - */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) - -/** - * @brief Clear the PVD Exti flag. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) - -/** - * @brief Generates a Software interrupt on PVD EXTI line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) - -/** - * @} - */ - -/* Include PWR HAL Extension module */ -#include "stm32f4xx_hal_pwr_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_PWR_DeInit(void); -void HAL_PWR_EnableBkUpAccess(void); -void HAL_PWR_DisableBkUpAccess(void); -/** - * @} - */ - -/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ -/* Peripheral Control functions **********************************************/ -/* PVD configuration */ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); -void HAL_PWR_EnablePVD(void); -void HAL_PWR_DisablePVD(void); - -/* WakeUp pins configuration */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); - -/* Low Power modes entry */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); -void HAL_PWR_EnterSTANDBYMode(void); - -/* Power PVD IRQ Handler */ -void HAL_PWR_PVD_IRQHandler(void); -void HAL_PWR_PVDCallback(void); - -/* Cortex System Control functions *******************************************/ -void HAL_PWR_EnableSleepOnExit(void); -void HAL_PWR_DisableSleepOnExit(void); -void HAL_PWR_EnableSEVOnPend(void); -void HAL_PWR_DisableSEVOnPend(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWR_Private_Constants PWR Private Constants - * @{ - */ - -/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line - * @{ - */ -#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ -/** - * @} - */ - -/** @defgroup PWR_register_alias_address PWR Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) -#define PWR_CR_OFFSET 0x00U -#define PWR_CSR_OFFSET 0x04U -#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) -#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) -/** - * @} - */ - -/** @defgroup PWR_CR_register_alias PWR CR Register alias address - * @{ - */ -/* --- CR Register ---*/ -/* Alias word address of DBP bit */ -#define DBP_BIT_NUMBER PWR_CR_DBP_Pos -#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U)) - -/* Alias word address of PVDE bit */ -#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos -#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U)) - -/* Alias word address of VOS bit */ -#define VOS_BIT_NUMBER PWR_CR_VOS_Pos -#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U)) -/** - * @} - */ - -/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address - * @{ - */ -/* --- CSR Register ---*/ -/* Alias word address of EWUP bit */ -#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos -#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U)) -/** - * @} - */ - -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWR_Private_Macros PWR Private Macros - * @{ - */ - -/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters - * @{ - */ -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ - ((MODE) == PWR_PVD_MODE_NORMAL)) -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PWR_H */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h deleted file mode 100644 index 57fd4d9..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h +++ /dev/null @@ -1,340 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr_ex.h - * @author MCD Application Team - * @brief Header file of PWR HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PWR_EX_H -#define __STM32F4xx_HAL_PWR_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWREx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode - * @{ - */ -#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS -#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS)) -/** - * @} - */ - -/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag - * @{ - */ -#define PWR_FLAG_ODRDY PWR_CSR_ODRDY -#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY -#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */ -#define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */ -#else -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to - 180 MHz by activating the over-drive mode. */ -#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to - 168 MHz by activating the over-drive mode. */ -#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */ -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ -/** - * @} - */ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins - * @{ - */ -#define PWR_WAKEUP_PIN2 0x00000080U -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define PWR_WAKEUP_PIN3 0x00000040U -#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \ - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ -#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__ specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ - UNUSED(tmpreg); \ - } while(0U) -#else -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__ specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macros to enable or disable the Over drive mode. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE) -#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE) - -/** @brief Macros to enable or disable the Over drive switching. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE) -#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE) - -/** @brief Macros to enable or disable the Under drive mode. - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - */ -#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN) -#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN)) - -/** @brief Check PWR flag is set or not. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode - * is ready - * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode - * switching is ready - * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode - * is enabled in Stop mode - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the Under-Drive Ready flag. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @addtogroup PWREx_Exported_Functions_Group1 - * @{ - */ -void HAL_PWREx_EnableFlashPowerDown(void); -void HAL_PWREx_DisableFlashPowerDown(void); -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); -uint32_t HAL_PWREx_GetVoltageRange(void); -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ - defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -void HAL_PWREx_EnableMainRegulatorLowVoltage(void); -void HAL_PWREx_DisableMainRegulatorLowVoltage(void); -void HAL_PWREx_EnableLowRegulatorLowVoltage(void); -void HAL_PWREx_DisableLowRegulatorLowVoltage(void); -#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\ - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWREx_Private_Constants PWREx Private Constants - * @{ - */ - -/** @defgroup PWREx_register_alias_address PWREx Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -/* --- CR Register ---*/ -/* Alias word address of FPDS bit */ -#define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos -#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U)) - -/* Alias word address of ODEN bit */ -#define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos -#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U)) - -/* Alias word address of ODSWEN bit */ -#define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos -#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U)) - -/* Alias word address of MRLVDS bit */ -#define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos -#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U)) - -/* Alias word address of LPLVDS bit */ -#define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos -#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U)) - - /** - * @} - */ - -/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address - * @{ - */ -/* --- CSR Register ---*/ -/* Alias word address of BRE bit */ -#define BRE_BIT_NUMBER PWR_CSR_BRE_Pos -#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U)) - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWREx_Private_Macros PWREx Private Macros - * @{ - */ - -/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) -#else -#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ - -#if defined(STM32F446xx) -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2)) -#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \ - ((PIN) == PWR_WAKEUP_PIN3)) -#else -#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1) -#endif /* STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PWR_EX_H */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h deleted file mode 100644 index dcf5814..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h +++ /dev/null @@ -1,1459 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc.h - * @author MCD Application Team - * @brief Header file of RCC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RCC_H -#define __STM32F4xx_HAL_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/* Include RCC HAL Extended module */ -/* (include on top of file since RCC structures are defined in extended file) */ -#include "stm32f4xx_hal_rcc_ex.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Types RCC Exported Types - * @{ - */ - -/** - * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition - */ -typedef struct -{ - uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ - - uint32_t HSEState; /*!< The new state of the HSE. - This parameter can be a value of @ref RCC_HSE_Config */ - - uint32_t LSEState; /*!< The new state of the LSE. - This parameter can be a value of @ref RCC_LSE_Config */ - - uint32_t HSIState; /*!< The new state of the HSI. - This parameter can be a value of @ref RCC_HSI_Config */ - - uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ - - uint32_t LSIState; /*!< The new state of the LSI. - This parameter can be a value of @ref RCC_LSI_Config */ - - RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ -}RCC_OscInitTypeDef; - -/** - * @brief RCC System, AHB and APB busses clock configuration structure definition - */ -typedef struct -{ - uint32_t ClockType; /*!< The clock to be configured. - This parameter can be a value of @ref RCC_System_Clock_Type */ - - uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. - This parameter can be a value of @ref RCC_System_Clock_Source */ - - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_AHB_Clock_Source */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - -}RCC_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_Oscillator_Type Oscillator Type - * @{ - */ -#define RCC_OSCILLATORTYPE_NONE 0x00000000U -#define RCC_OSCILLATORTYPE_HSE 0x00000001U -#define RCC_OSCILLATORTYPE_HSI 0x00000002U -#define RCC_OSCILLATORTYPE_LSE 0x00000004U -#define RCC_OSCILLATORTYPE_LSI 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_HSE_Config HSE Config - * @{ - */ -#define RCC_HSE_OFF 0x00000000U -#define RCC_HSE_ON RCC_CR_HSEON -#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) -/** - * @} - */ - -/** @defgroup RCC_LSE_Config LSE Config - * @{ - */ -#define RCC_LSE_OFF 0x00000000U -#define RCC_LSE_ON RCC_BDCR_LSEON -#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) -/** - * @} - */ - -/** @defgroup RCC_HSI_Config HSI Config - * @{ - */ -#define RCC_HSI_OFF ((uint8_t)0x00) -#define RCC_HSI_ON ((uint8_t)0x01) - -#define RCC_HSICALIBRATION_DEFAULT 0x10U /* Default HSI calibration trimming value */ -/** - * @} - */ - -/** @defgroup RCC_LSI_Config LSI Config - * @{ - */ -#define RCC_LSI_OFF ((uint8_t)0x00) -#define RCC_LSI_ON ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup RCC_PLL_Config PLL Config - * @{ - */ -#define RCC_PLL_NONE ((uint8_t)0x00) -#define RCC_PLL_OFF ((uint8_t)0x01) -#define RCC_PLL_ON ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider - * @{ - */ -#define RCC_PLLP_DIV2 0x00000002U -#define RCC_PLLP_DIV4 0x00000004U -#define RCC_PLLP_DIV6 0x00000006U -#define RCC_PLLP_DIV8 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_PLL_Clock_Source PLL Clock Source - * @{ - */ -#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI -#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Type System Clock Type - * @{ - */ -#define RCC_CLOCKTYPE_SYSCLK 0x00000001U -#define RCC_CLOCKTYPE_HCLK 0x00000002U -#define RCC_CLOCKTYPE_PCLK1 0x00000004U -#define RCC_CLOCKTYPE_PCLK2 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source System Clock Source - * @note The RCC_SYSCLKSOURCE_PLLRCLK parameter is available only for - * STM32F446xx devices. - * @{ - */ -#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI -#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE -#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL -#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1)) -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status - * @note The RCC_SYSCLKSOURCE_STATUS_PLLRCLK parameter is available only for - * STM32F446xx devices. - * @{ - */ -#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SWS_0 | RCC_CFGR_SWS_1)) /*!< PLLR used as system clock */ -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source AHB Clock Source - * @{ - */ -#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 -#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 -#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 -#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 -#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 -#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 -#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 -#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 -#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 -/** - * @} - */ - -/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source - * @{ - */ -#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 -#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 -#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 -#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 -#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source RTC Clock Source - * @{ - */ -#define RCC_RTCCLKSOURCE_NO_CLK 0x00000000U -#define RCC_RTCCLKSOURCE_LSE 0x00000100U -#define RCC_RTCCLKSOURCE_LSI 0x00000200U -#define RCC_RTCCLKSOURCE_HSE_DIVX 0x00000300U -#define RCC_RTCCLKSOURCE_HSE_DIV2 0x00020300U -#define RCC_RTCCLKSOURCE_HSE_DIV3 0x00030300U -#define RCC_RTCCLKSOURCE_HSE_DIV4 0x00040300U -#define RCC_RTCCLKSOURCE_HSE_DIV5 0x00050300U -#define RCC_RTCCLKSOURCE_HSE_DIV6 0x00060300U -#define RCC_RTCCLKSOURCE_HSE_DIV7 0x00070300U -#define RCC_RTCCLKSOURCE_HSE_DIV8 0x00080300U -#define RCC_RTCCLKSOURCE_HSE_DIV9 0x00090300U -#define RCC_RTCCLKSOURCE_HSE_DIV10 0x000A0300U -#define RCC_RTCCLKSOURCE_HSE_DIV11 0x000B0300U -#define RCC_RTCCLKSOURCE_HSE_DIV12 0x000C0300U -#define RCC_RTCCLKSOURCE_HSE_DIV13 0x000D0300U -#define RCC_RTCCLKSOURCE_HSE_DIV14 0x000E0300U -#define RCC_RTCCLKSOURCE_HSE_DIV15 0x000F0300U -#define RCC_RTCCLKSOURCE_HSE_DIV16 0x00100300U -#define RCC_RTCCLKSOURCE_HSE_DIV17 0x00110300U -#define RCC_RTCCLKSOURCE_HSE_DIV18 0x00120300U -#define RCC_RTCCLKSOURCE_HSE_DIV19 0x00130300U -#define RCC_RTCCLKSOURCE_HSE_DIV20 0x00140300U -#define RCC_RTCCLKSOURCE_HSE_DIV21 0x00150300U -#define RCC_RTCCLKSOURCE_HSE_DIV22 0x00160300U -#define RCC_RTCCLKSOURCE_HSE_DIV23 0x00170300U -#define RCC_RTCCLKSOURCE_HSE_DIV24 0x00180300U -#define RCC_RTCCLKSOURCE_HSE_DIV25 0x00190300U -#define RCC_RTCCLKSOURCE_HSE_DIV26 0x001A0300U -#define RCC_RTCCLKSOURCE_HSE_DIV27 0x001B0300U -#define RCC_RTCCLKSOURCE_HSE_DIV28 0x001C0300U -#define RCC_RTCCLKSOURCE_HSE_DIV29 0x001D0300U -#define RCC_RTCCLKSOURCE_HSE_DIV30 0x001E0300U -#define RCC_RTCCLKSOURCE_HSE_DIV31 0x001F0300U -/** - * @} - */ - -/** @defgroup RCC_MCO_Index MCO Index - * @{ - */ -#define RCC_MCO1 0x00000000U -#define RCC_MCO2 0x00000001U -/** - * @} - */ - -/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source - * @{ - */ -#define RCC_MCO1SOURCE_HSI 0x00000000U -#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0 -#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1 -#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1 -/** - * @} - */ - -/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler - * @{ - */ -#define RCC_MCODIV_1 0x00000000U -#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2 -#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE -/** - * @} - */ - -/** @defgroup RCC_Interrupt Interrupts - * @{ - */ -#define RCC_IT_LSIRDY ((uint8_t)0x01) -#define RCC_IT_LSERDY ((uint8_t)0x02) -#define RCC_IT_HSIRDY ((uint8_t)0x04) -#define RCC_IT_HSERDY ((uint8_t)0x08) -#define RCC_IT_PLLRDY ((uint8_t)0x10) -#define RCC_IT_PLLI2SRDY ((uint8_t)0x20) -#define RCC_IT_CSS ((uint8_t)0x80) -/** - * @} - */ - -/** @defgroup RCC_Flag Flags - * Elements values convention: 0XXYYYYYb - * - YYYYY : Flag position in the register - * - 0XX : Register index - * - 01: CR register - * - 10: BDCR register - * - 11: CSR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_HSIRDY ((uint8_t)0x21) -#define RCC_FLAG_HSERDY ((uint8_t)0x31) -#define RCC_FLAG_PLLRDY ((uint8_t)0x39) -#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B) - -/* Flags in the BDCR register */ -#define RCC_FLAG_LSERDY ((uint8_t)0x41) - -/* Flags in the CSR register */ -#define RCC_FLAG_LSIRDY ((uint8_t)0x61) -#define RCC_FLAG_BORRST ((uint8_t)0x79) -#define RCC_FLAG_PINRST ((uint8_t)0x7A) -#define RCC_FLAG_PORRST ((uint8_t)0x7B) -#define RCC_FLAG_SFTRST ((uint8_t)0x7C) -#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) -#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) -#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN)) -#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN)) -#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) -#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) -#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN)) -#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN)) -/** - * @} - */ - -/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) != RESET) -#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) != RESET) -#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) != RESET) -#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) != RESET) -#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) != RESET) -#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) != RESET) - -#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) == RESET) -#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) == RESET) -#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) == RESET) -#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) == RESET) -#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) == RESET) -#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_PWR_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) -#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) -#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) -#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) -#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) -#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) -#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) -#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) -#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) -#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) -#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) -#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) -#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) - -#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) -#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) -#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) -#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) -#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) -#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) -#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) -#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) -#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN)) -#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) -#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) -#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) -#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) -#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) -#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) -#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET) -#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) -#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) -#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) -#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) - -#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) -#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) -#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET) -#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) -#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) -#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) -#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST)) -#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST)) - -#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) -#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST)) -#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) -#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) -#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) -/** - * @} - */ - -/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) - -#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN)) -/** - * @} - */ - -/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN)) - -#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN)) - -#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN)) -/** - * @} - */ - -/** @defgroup RCC_HSI_Configuration HSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * It is used (enabled by hardware) as system clock source after startup - * from Reset, wake-up from STOP and STANDBY mode, or in case of failure - * of the HSE used directly or indirectly as system clock (if the Clock - * Security System CSS is enabled). - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * This parameter can be: ENABLE or DISABLE. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - */ -#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) -#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) - -/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param __HSICalibrationValue__ specifies the calibration trimming value. - * (default is RCC_HSICALIBRATION_DEFAULT). - * This parameter must be a number between 0 and 0x1F. - */ -#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\ - RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_Pos)) -/** - * @} - */ - -/** @defgroup RCC_LSI_Configuration LSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - * @note LSI can not be disabled if the IWDG is running. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - */ -#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) -#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_HSE_Configuration HSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro. - * User should request a transition to HSE Off first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param __STATE__ specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg RCC_HSE_ON: turn ON the HSE oscillator. - * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_HSE_CONFIG(__STATE__) \ - do { \ - if ((__STATE__) == RCC_HSE_ON) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else if ((__STATE__) == RCC_HSE_BYPASS) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCC_LSE_Configuration LSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE). - * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. - * User should request a transition to LSE Off first and then LSE On or LSE Bypass. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param __STATE__ specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg RCC_LSE_ON: turn ON the LSE oscillator. - * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_LSE_CONFIG(__STATE__) \ - do { \ - if((__STATE__) == RCC_LSE_ON) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else if((__STATE__) == RCC_LSE_BYPASS) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration - * @{ - */ - -/** @brief Macros to enable or disable the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE) -#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE) - -/** @brief Macros to configure the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using the Power Backup Access macro before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it can't be changed unless the - * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by - * a Power On Reset (POR). - * @param __RTCCLKSource__ specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK : No clock selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSE : LSE selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSI : LSI selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wake-up source. - * However, when the HSE clock is used as RTC clock source, the RTC - * cannot be used in STOP and STANDBY modes. - * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as - * RTC clock source). - */ -#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFFU)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) - -#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \ - RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \ - } while(0U) - -/** @brief Macro to get the RTC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - */ -#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) - -/** - * @brief Get the RTC and HSE clock divider (RTCPRE). - * @retval Returned value can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - */ -#define __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL) - -/** @brief Macros to force or release the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_CSR register. - * @note The BKPSRAM is not affected by this reset. - */ -#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE) -#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_PLL_Configuration PLL Configuration - * @{ - */ - -/** @brief Macros to enable or disable the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL can not be disabled if it is used as system clock source - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE) -#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE) - -/** @brief Macro to configure the PLL clock source. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLSOURCE__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * - */ -#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) - -/** @brief Macro to configure the PLL multiplication factor. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * - */ -#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) -/** - * @} - */ - -/** @defgroup RCC_Get_Clock_source Get Clock source - * @{ - */ -/** - * @brief Macro to configure the system clock source. - * @param __RCC_SYSCLKSOURCE__ specifies the system clock source. - * This parameter can be one of the following values: - * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source. This - * parameter is available only for STM32F446xx devices. - */ -#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__)) - -/** @brief Macro to get the clock source used as system clock. - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock. This parameter - * is available only for STM32F446xx devices. - */ -#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) - -/** @brief Macro to get the oscillator used as PLL clock source. - * @retval The oscillator used as PLL clock source. The returned value can be one - * of the following: - * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. - * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. - */ -#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) -/** - * @} - */ - -/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config - * @{ - */ - -/** @brief Macro to configure the MCO1 clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - */ -#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) - -/** @brief Macro to configure the MCO2 clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx - * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices - * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - * @note For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have - * at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5). - */ -#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U))); -/** - * @} - */ - -/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ - -/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable - * the selected interrupts). - * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) - -/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable - * the selected interrupts). - * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) - -/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16] - * bits to clear the selected interrupt pending bits. - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - */ -#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) - -/** @brief Check the RCC's interrupt has occurred or not. - * @param __INTERRUPT__ specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST, - * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. - */ -#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) - -/** @brief Check RCC flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready. - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready. - * @arg RCC_FLAG_PLLRDY: Main PLL clock ready. - * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready. - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready. - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready. - * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset. - * @arg RCC_FLAG_PINRST: Pin reset. - * @arg RCC_FLAG_PORRST: POR/PDR reset. - * @arg RCC_FLAG_SFTRST: Software reset. - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset. - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset. - * @arg RCC_FLAG_LPWRRST: Low Power reset. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define RCC_FLAG_MASK ((uint8_t)0x1FU) -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR :((((__FLAG__) >> 5U) == 3U)? RCC->CSR :RCC->CIR))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - /** @addtogroup RCC_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_RCC_DeInit(void); -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); -/** - * @} - */ - -/** @addtogroup RCC_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); -void HAL_RCC_EnableCSS(void); -void HAL_RCC_DisableCSS(void); -uint32_t HAL_RCC_GetSysClockFreq(void); -uint32_t HAL_RCC_GetHCLKFreq(void); -uint32_t HAL_RCC_GetPCLK1Freq(void); -uint32_t HAL_RCC_GetPCLK2Freq(void); -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); - -/* CSS NMI IRQ handler */ -void HAL_RCC_NMI_IRQHandler(void); - -/* User Callbacks in non blocking mode (IT mode) */ -void HAL_RCC_CSSCallback(void); - -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Constants RCC Private Constants - * @{ - */ - -/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) -/* --- CR Register --- */ -/* Alias word address of HSION bit */ -#define RCC_CR_OFFSET (RCC_OFFSET + 0x00U) -#define RCC_HSION_BIT_NUMBER 0x00U -#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_HSION_BIT_NUMBER * 4U)) -/* Alias word address of CSSON bit */ -#define RCC_CSSON_BIT_NUMBER 0x13U -#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_CSSON_BIT_NUMBER * 4U)) -/* Alias word address of PLLON bit */ -#define RCC_PLLON_BIT_NUMBER 0x18U -#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLON_BIT_NUMBER * 4U)) - -/* --- BDCR Register --- */ -/* Alias word address of RTCEN bit */ -#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70U) -#define RCC_RTCEN_BIT_NUMBER 0x0FU -#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U)) -/* Alias word address of BDRST bit */ -#define RCC_BDRST_BIT_NUMBER 0x10U -#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_BDRST_BIT_NUMBER * 4U)) - -/* --- CSR Register --- */ -/* Alias word address of LSION bit */ -#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74U) -#define RCC_LSION_BIT_NUMBER 0x00U -#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32U) + (RCC_LSION_BIT_NUMBER * 4U)) - -/* CR register byte 3 (Bits[23:16]) base address */ -#define RCC_CR_BYTE2_ADDRESS 0x40023802U - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x01U)) - -/* CIR register byte 3 (Bits[23:16]) base address */ -#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x02U)) - -/* BDCR register base address */ -#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET) - -#define RCC_DBP_TIMEOUT_VALUE 2U -#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT - -#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT -#define HSI_TIMEOUT_VALUE 2U /* 2 ms */ -#define LSI_TIMEOUT_VALUE 2U /* 2 ms */ -#define CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RCC_Private_Macros RCC Private Macros - * @{ - */ - -/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15U) - -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_BYPASS)) - -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_BYPASS)) - -#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON)) - -#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON)) - -#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON)) - -#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ - ((SOURCE) == RCC_PLLSOURCE_HSE)) - -#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK)) - -#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31)) - -#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63U) - -#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2U) || ((VALUE) == 4U) || ((VALUE) == 6U) || ((VALUE) == 8U)) - -#define IS_RCC_PLLQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \ - ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \ - ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \ - ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \ - ((HCLK) == RCC_SYSCLK_DIV512)) - -#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 15U)) - -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \ - ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \ - ((PCLK) == RCC_HCLK_DIV16)) - -#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2)) - -#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ - ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK)) - -#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ - ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \ - ((DIV) == RCC_MCODIV_5)) -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1FU) - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RCC_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h deleted file mode 100644 index 909a717..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h +++ /dev/null @@ -1,7111 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc_ex.h - * @author MCD Application Team - * @brief Header file of RCC HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RCC_EX_H -#define __STM32F4xx_HAL_RCC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Types RCCEx Exported Types - * @{ - */ - -/** - * @brief RCC PLL configuration structure definition - */ -typedef struct -{ - uint32_t PLLState; /*!< The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ - - uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - - uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 0 and Max_Data = 63 */ - - uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 - except for STM32F411xE devices where the Min_Data = 192 */ - - uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK). - This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ - - uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks. - This parameter must be a number between Min_Data = 2 and Max_Data = 15 */ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. - This parameter is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx - and STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F413xx/STM32F423xx devices. - This parameter must be a number between Min_Data = 2 and Max_Data = 7 */ -#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -}RCC_PLLInitTypeDef; - -#if defined(STM32F446xx) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock. - This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks. - This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ -}RCC_PLLSAIInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ - - uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ - - uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ - - uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ - - uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection. - This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection. - This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */ - - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F446xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - uint32_t I2SClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2S_APB_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ - -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t PLLDivR; /*!< Specifies the PLL division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLL is selected as Clock Source SAI */ - - uint32_t PLLI2SDivR; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ -#endif /* STM32F413xx || STM32F423xx */ - - uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ - - uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */ - - uint32_t Dfsdm1AudioClockSelection;/*!< Specifies DFSDM1 Audio Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */ - -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t Dfsdm2ClockSelection; /*!< Specifies DFSDM2 Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM2_Kernel_Clock_Source */ - - uint32_t Dfsdm2AudioClockSelection;/*!< Specifies DFSDM2 Audio Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM2_Audio_Clock_Source */ - - uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ - - uint32_t SaiAClockSelection; /*!< Specifies SAI1_A Clock Prescalers Selection - This parameter can be a value of @ref RCCEx_SAI1_BlockA_Clock_Source */ - - uint32_t SaiBClockSelection; /*!< Specifies SAI1_B Clock Prescalers Selection - This parameter can be a value of @ref RCCEx_SAI1_BlockB_Clock_Source */ -#endif /* STM32F413xx || STM32F423xx */ - - uint32_t PLLI2SSelection; /*!< Specifies PLL I2S Clock Source Selection. - This parameter can be a value of @ref RCCEx_PLL_I2S_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ -#if defined(STM32F469xx) || defined(STM32F479xx) - uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS and SDIO clocks. - This parameter is only available in STM32F469xx/STM32F479xx devices. - This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ -#endif /* STM32F469xx || STM32F479xx */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ - - uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLSAI is selected as Clock Source LTDC */ - -}RCC_PLLSAIInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock. - This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -#if defined(STM32F469xx) || defined(STM32F479xx) - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ -#endif /* STM32F469xx || STM32F479xx */ -}RCC_PeriphCLKInitTypeDef; - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ -#if defined(STM32F411xE) - uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 62 */ -#endif /* STM32F411xE */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 - Except for STM32F411xE devices where the Min_Data = 192. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - -}RCC_PLLI2SInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants - * @{ - */ - -/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection - * @{ - */ -/* Peripheral Clock source for STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -#define RCC_PERIPHCLK_I2S_APB1 0x00000001U -#define RCC_PERIPHCLK_I2S_APB2 0x00000002U -#define RCC_PERIPHCLK_TIM 0x00000004U -#define RCC_PERIPHCLK_RTC 0x00000008U -#define RCC_PERIPHCLK_FMPI2C1 0x00000010U -#define RCC_PERIPHCLK_CLK48 0x00000020U -#define RCC_PERIPHCLK_SDIO 0x00000040U -#define RCC_PERIPHCLK_PLLI2S 0x00000080U -#define RCC_PERIPHCLK_DFSDM1 0x00000100U -#define RCC_PERIPHCLK_DFSDM1_AUDIO 0x00000200U -#endif /* STM32F412Zx || STM32F412Vx) || STM32F412Rx || STM32F412Cx */ -#if defined(STM32F413xx) || defined(STM32F423xx) -#define RCC_PERIPHCLK_DFSDM2 0x00000400U -#define RCC_PERIPHCLK_DFSDM2_AUDIO 0x00000800U -#define RCC_PERIPHCLK_LPTIM1 0x00001000U -#define RCC_PERIPHCLK_SAIA 0x00002000U -#define RCC_PERIPHCLK_SAIB 0x00004000U -#endif /* STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- Peripheral Clock source for STM32F410xx ----------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_TIM 0x00000002U -#define RCC_PERIPHCLK_RTC 0x00000004U -#define RCC_PERIPHCLK_FMPI2C1 0x00000008U -#define RCC_PERIPHCLK_LPTIM1 0x00000010U -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- Peripheral Clock source for STM32F446xx ----------------*/ -#if defined(STM32F446xx) -#define RCC_PERIPHCLK_I2S_APB1 0x00000001U -#define RCC_PERIPHCLK_I2S_APB2 0x00000002U -#define RCC_PERIPHCLK_SAI1 0x00000004U -#define RCC_PERIPHCLK_SAI2 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_CEC 0x00000040U -#define RCC_PERIPHCLK_FMPI2C1 0x00000080U -#define RCC_PERIPHCLK_CLK48 0x00000100U -#define RCC_PERIPHCLK_SDIO 0x00000200U -#define RCC_PERIPHCLK_SPDIFRX 0x00000400U -#define RCC_PERIPHCLK_PLLI2S 0x00000800U -#endif /* STM32F446xx */ -/*-----------------------------------------------------------------------------*/ - -/*----------- Peripheral Clock source for STM32F469xx/STM32F479xx -------------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_SAI_PLLI2S 0x00000002U -#define RCC_PERIPHCLK_SAI_PLLSAI 0x00000004U -#define RCC_PERIPHCLK_LTDC 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_PLLI2S 0x00000040U -#define RCC_PERIPHCLK_CLK48 0x00000080U -#define RCC_PERIPHCLK_SDIO 0x00000100U -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*-------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_SAI_PLLI2S 0x00000002U -#define RCC_PERIPHCLK_SAI_PLLSAI 0x00000004U -#define RCC_PERIPHCLK_LTDC 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_PLLI2S 0x00000040U -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*-------- Peripheral Clock source for STM32F40xxx/STM32F41xxx ---------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_RTC 0x00000002U -#define RCC_PERIPHCLK_PLLI2S 0x00000004U -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define RCC_PERIPHCLK_TIM 0x00000008U -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -/*----------------------------------------------------------------------------*/ -/** - * @} - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \ - defined(STM32F479xx) -/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source - * @{ - */ -#define RCC_I2SCLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SCLKSOURCE_EXT 0x00000001U -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */ - -/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PLLSAIDIVR_2 0x00000000U -#define RCC_PLLSAIDIVR_4 0x00010000U -#define RCC_PLLSAIDIVR_8 0x00020000U -#define RCC_PLLSAIDIVR_16 0x00030000U -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider - * @{ - */ -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define RCC_PLLI2SP_DIV2 0x00000002U -#define RCC_PLLI2SP_DIV4 0x00000004U -#define RCC_PLLI2SP_DIV6 0x00000006U -#define RCC_PLLI2SP_DIV8 0x00000008U -#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/** - * @} - */ - -/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider - * @{ - */ -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PLLSAIP_DIV2 0x00000002U -#define RCC_PLLSAIP_DIV4 0x00000004U -#define RCC_PLLSAIP_DIV6 0x00000006U -#define RCC_PLLSAIP_DIV8 0x00000008U -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source - * @{ - */ -#define RCC_SAIACLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAIACLKSOURCE_PLLI2S 0x00100000U -#define RCC_SAIACLKSOURCE_EXT 0x00200000U -/** - * @} - */ - -/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source - * @{ - */ -#define RCC_SAIBCLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAIBCLKSOURCE_PLLI2S 0x00400000U -#define RCC_SAIBCLKSOURCE_EXT 0x00800000U -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_SDIOSEL) -/** - * @} - */ - -/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source - * @{ - */ -#define RCC_DSICLKSOURCE_DSIPHY 0x00000000U -#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_DSISEL) -/** - * @} - */ -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) -/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source - * @{ - */ -#define RCC_SAI1CLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0) -#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1) -#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source - * @{ - */ -#define RCC_SAI2CLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0) -#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1) -#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source - * @{ - */ -#define RCC_I2SAPB1CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) -#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) -#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source - * @{ - */ -#define RCC_I2SAPB2CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) -#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) -#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source - * @{ - */ -#define RCC_CECCLKSOURCE_HSI 0x00000000U -#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL) -/** - * @} - */ - -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source - * @{ - */ -#define RCC_SPDIFRXCLKSOURCE_PLLR 0x00000000U -#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL) -/** - * @} - */ - -#endif /* STM32F446xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_SAI1_BlockA_Clock_Source RCC SAI BlockA Clock Source - * @{ - */ -#define RCC_SAIACLKSOURCE_PLLI2SR 0x00000000U -#define RCC_SAIACLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1ASRC_0) -#define RCC_SAIACLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1ASRC_1) -#define RCC_SAIACLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI1ASRC_0 | RCC_DCKCFGR_SAI1ASRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_SAI1_BlockB_Clock_Source RCC SAI BlockB Clock Source - * @{ - */ -#define RCC_SAIBCLKSOURCE_PLLI2SR 0x00000000U -#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1BSRC_0) -#define RCC_SAIBCLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1BSRC_1) -#define RCC_SAIBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI1BSRC_0 | RCC_DCKCFGR_SAI1BSRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source - * @{ - */ -#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0) -#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1) -#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1) -/** - * @} - */ - - -/** @defgroup RCCEx_DFSDM2_Audio_Clock_Source RCC DFSDM2 Audio Clock Source - * @{ - */ -#define RCC_DFSDM2AUDIOCLKSOURCE_I2S1 0x00000000U -#define RCC_DFSDM2AUDIOCLKSOURCE_I2S2 ((uint32_t)RCC_DCKCFGR_CKDFSDM2ASEL) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM2_Kernel_Clock_Source RCC DFSDM2 Kernel Clock Source - * @{ - */ -#define RCC_DFSDM2CLKSOURCE_PCLK2 0x00000000U -#define RCC_DFSDM2CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL) -/** - * @} - */ - -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_PLL_I2S_Clock_Source PLL I2S Clock Source - * @{ - */ -#define RCC_PLLI2SCLKSOURCE_PLLSRC 0x00000000U -#define RCC_PLLI2SCLKSOURCE_EXT ((uint32_t)RCC_PLLI2SCFGR_PLLI2SSRC) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source RCC DFSDM1 Audio Clock Source - * @{ - */ -#define RCC_DFSDM1AUDIOCLKSOURCE_I2S1 0x00000000U -#define RCC_DFSDM1AUDIOCLKSOURCE_I2S2 ((uint32_t)RCC_DCKCFGR_CKDFSDM1ASEL) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCC DFSDM1 Kernel Clock Source - * @{ - */ -#define RCC_DFSDM1CLKSOURCE_PCLK2 0x00000000U -#define RCC_DFSDM1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source - * @{ - */ -#define RCC_I2SAPB1CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) -#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) -#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source - * @{ - */ -#define RCC_I2SAPB2CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) -#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) -#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLI2SQ ((uint32_t)RCC_DCKCFGR2_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) -/** - * @} - */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) - -/** @defgroup RCCEx_I2S_APB_Clock_Source RCC I2S APB Clock Source - * @{ - */ -#define RCC_I2SAPBCLKSOURCE_PLLR 0x00000000U -#define RCC_I2SAPBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2SSRC_0) -#define RCC_I2SAPBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2SSRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source - * @{ - */ -#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0) -#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1) -#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1) -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection - * @{ - */ -#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00) -#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01) -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection - * @{ - */ -#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00) -#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01) -/** - * @} - */ -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||\ - STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source - * @{ - */ -#define RCC_MCO2SOURCE_SYSCLK 0x00000000U -#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0 -#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 -#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F413xx | STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source - * @{ - */ -#define RCC_MCO2SOURCE_SYSCLK 0x00000000U -#define RCC_MCO2SOURCE_I2SCLK RCC_CFGR_MCO2_0 -#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 -#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros - * @{ - */ -/*------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx --------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN)) -#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN)) -#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN)) -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) - -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0U) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) -#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET) -#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET) -#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) -#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET) -#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET) -#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - #define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) -#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) - -#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) -#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) -#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) -#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) -#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) -#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN)) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))!= RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))== RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET) -#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET) -#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST)) -#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST)) -#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) - -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST)) -#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST)) -#endif /* STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST)) -#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN)) -#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN)) -#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN)) -#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN)) - -#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN)) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN)) -#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------------- STM32F40xxx/STM32F41xxx-----------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#if defined(STM32F407xx)|| defined(STM32F417xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0U) - -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0U) -#endif /* STM32F407xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN))== RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#if defined(STM32F407xx)|| defined(STM32F417xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) -#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) -#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) -#endif /* STM32F407xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) -#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) - -#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) -#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET) -#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) - /** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) - -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) -#endif /* STM32F415xx || STM32F417xx */ - -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------- STM32F401xE/STM32F401xC --------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -/** - * @} - */ -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -/** - * @} - */ -#endif /* STM32F401xC || STM32F401xE*/ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F410xx -------------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) != RESET) - -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB1) peripheral clock. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) -#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET) - -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_RNGRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() -#define __HAL_RCC_AHB2_RELEASE_RESET() -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() -#define __HAL_RCC_AHB3_RELEASE_RESET() -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) - -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_RNGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_RNGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) -#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) - -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) -#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN)) -/** - * @} - */ - -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F411xx -------------------------------*/ -#if defined(STM32F411xE) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEX_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -/** - * @} - */ -#endif /* STM32F411xE */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F446xx -----------------------------*/ -#if defined(STM32F446xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN))!= RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) - -#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CEC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) -#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) -#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) - -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) - -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN)) -/** - * @} - */ - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*-------STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx-------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_AES_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_AESEN)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) != RESET) -#define __HAL_RCC_AES_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) == RESET) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) - -#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN3EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) -#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) -#endif /* STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN))!= RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) -#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) -#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_UART9EN)) -#define __HAL_RCC_UART10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_UART10EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM2EN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART9EN)) != RESET) -#define __HAL_RCC_UART10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART10EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM2EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART9EN)) == RESET) -#define __HAL_RCC_UART10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART10EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM2EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) - -#if defined(STM32F423xx) -#define __HAL_RCC_AES_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_AESRST)) -#define __HAL_RCC_AES_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_AESRST)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) - -#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Cx) -#define __HAL_RCC_AHB3_FORCE_RESET() -#define __HAL_RCC_AHB3_RELEASE_RESET() - -#define __HAL_RCC_FSMC_FORCE_RESET() -#define __HAL_RCC_QSPI_FORCE_RESET() - -#define __HAL_RCC_FSMC_RELEASE_RESET() -#define __HAL_RCC_QSPI_RELEASE_RESET() -#endif /* STM32F412Cx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN3RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN3RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_UART9RST)) -#define __HAL_RCC_UART10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_UART10RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM2RST)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_UART9RST)) -#define __HAL_RCC_UART10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_UART10RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM2RST)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AESLPEN)) -#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_AESLPEN)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) - -#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN3LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN3LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_UART9LPEN)) -#define __HAL_RCC_UART10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_UART10LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_UART9LPEN)) -#define __HAL_RCC_UART10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_UART10LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------- PLL Configuration --------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 100 and 432 MHz. - * - * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLQ__ specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - * @param __PLLR__ PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note This parameter is only available in STM32F446xx/STM32F469xx/STM32F479xx/ - STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F413xx/STM32F423xx devices. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \ - (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLP__) >> 1U) -1U) << RCC_PLLCFGR_PLLP_Pos) | \ - ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos) | \ - ((__PLLR__) << RCC_PLLCFGR_PLLR_Pos))) -#else -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432 - * Except for STM32F411xE devices where Min_Data = 192. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 100 and 432 MHz, Except for STM32F411xE devices - * where frequency is between 192 and 432 MHz. - * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLQ__ specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \ - (RCC->PLLCFGR = (0x20000000U | (__RCC_PLLSource__) | (__PLLM__)| \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLP__) >> 1U) -1U) << RCC_PLLCFGR_PLLP_Pos) | \ - ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos))) - #endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------PLLI2S Configuration ---------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - -/** @brief Macros to enable or disable the PLLI2S. - * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE) -#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE) - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F412Cx */ -#if defined(STM32F446xx) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SP__ specifies division factor for SPDIFRX Clock. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note the PLLI2SP parameter is only available with STM32F446xx Devices - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - * @param __PLLI2SQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((((__PLLI2SP__) >> 1U) -1U) << RCC_PLLI2SCFGR_PLLI2SP_Pos) |\ - ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - * @param __PLLI2SQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#else -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = (((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#endif /* STM32F446xx */ - -#if defined(STM32F411xE) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note The PLLI2SM parameter is only used with STM32F411xE/STM32F410xx Devices - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLLI2S jitter. - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#endif /* STM32F411xE */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API) - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * @param __PLLI2SQ__ specifies the division factor for SAI1 clock. - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx/469xx/479xx - * Devices and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6U) |\ - ((__PLLI2SQ__) << 24U) |\ - ((__PLLI2SR__) << 28U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------ PLLSAI Configuration ------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macros to Enable or Disable the PLLISAI. - * @note The PLLSAI is only available with STM32F429x/439x Devices. - * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE) -#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE) - -#if defined(STM32F446xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIM__ specifies the division factor for PLLSAI VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * @note The PLLSAIM parameter is only used with STM32F446xx Devices - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIP__ specifies division factor for OTG FS, SDIO and RNG clocks. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note the PLLSAIP parameter is only available with STM32F446xx Devices - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = ((__PLLSAIM__) | \ - ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) | \ - ((((__PLLSAIP__) >> 1U) -1U) << RCC_PLLSAICFGR_PLLSAIP_Pos) | \ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos))) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIP__ specifies division factor for SDIO and CLK48 clocks. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = (((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\ - ((((__PLLSAIP__) >> 1U) -1U) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) |\ - ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = (((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) | \ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) | \ - ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- PLLSAI/PLLI2S Dividers Configuration -------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. - * @note This function must be called before enabling the PLLI2S. - * @param __PLLI2SDivR__ specifies the PLLI2S division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2SR) / __PLLI2SDivR__ - */ -#define __HAL_RCC_PLLI2S_PLLSAICLKDIVR_CONFIG(__PLLI2SDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR, (__PLLI2SDivR__)-1U)) - -/** @brief Macro to configure the SAI clock Divider coming from PLL. - * @param __PLLDivR__ specifies the PLL division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLR) / __PLLDivR__ - */ -#define __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(__PLLDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR, ((__PLLDivR__)-1U)<<8U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. - * @note This function must be called before enabling the PLLI2S. - * @param __PLLI2SDivQ__ specifies the PLLI2S division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__ - */ -#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1U)) - -/** @brief Macro to configure the SAI clock Divider coming from PLLSAI. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivQ__ specifies the PLLSAI division factor for SAI1 clock . - * This parameter must be a number between Min_Data = 1 and Max_Data = 32. - * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1U)<<8U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI. - * - * @note The LTDC peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivR__ specifies the PLLSAI division factor for LTDC clock . - * This parameter must be a number between Min_Data = 2 and Max_Data = 16. - * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------- Peripheral Clock selection -----------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\ - defined(STM32F479xx) -/** @brief Macro to configure the I2S clock source (I2SCLK). - * @note This function must be called before enabling the I2S APB clock. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. - * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin - * used as I2S clock source. - */ -#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__)) - - -/** @brief Macro to get the I2S clock source (I2SCLK). - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. - * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin - * used as I2S clock source - */ -#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC))) -#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** @brief Macro to configure SAI1BlockA clock source selection. - * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block A clock. - */ -#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) - -/** @brief Macro to configure SAI1BlockB clock source selection. - * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block B clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block B clock. - * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block B clock. - * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block B clock. - */ -#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) -/** @brief Macro to configure SAI1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI1 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - */ -#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - */ -#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC)) - -/** @brief Macro to configure SAI2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI2 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. - */ -#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__))) - -/** @brief Macro to Get SAI2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. - */ -#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC)) - -/** @brief Macro to configure I2S APB1 clock source selection. - * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. - * @param __SOURCE__ specifies the I2S APB1 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB1 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) - -/** @brief Macro to configure I2S APB2 clock source selection. - * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB2 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) - -/** @brief Macro to configure the CEC clock. - * @param __SOURCE__ specifies the CEC clock source. - * This parameter can be one of the following values: - * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - */ -#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CEC clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - */ -#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) - -/** @brief Macro to configure the SPDIFRX clock. - * @param __SOURCE__ specifies the SPDIFRX clock source. - * This parameter can be one of the following values: - * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. - * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. - */ -#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SPDIFRX clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. - * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. - */ -#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL)) - -/** @brief Macro to configure the DSI clock. - * @param __SOURCE__ specifies the DSI clock source. - * This parameter can be one of the following values: - * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. - * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. - */ -#define __HAL_RCC_DSI_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the DSI clock. - * @retval The clock source can be one of the following values: - * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. - * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. - */ -#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL)) - -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - /** @brief Macro to configure the DFSDM1 clock. - * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. - * @retval None - */ -#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. - */ -#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) - -/** @brief Macro to configure DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/ - STM32F413xx/STM32F423xx Devices. - * @param __SOURCE__ specifies the DFSDM1 Audio clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL, (__SOURCE__))) - -/** @brief Macro to Get DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/ - STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL)) - -#if defined(STM32F413xx) || defined(STM32F423xx) - /** @brief Macro to configure the DFSDM2 clock. - * @param __DFSDM2_CLKSOURCE__ specifies the DFSDM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. - * @retval None - */ -#define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM2_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM2 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. - */ -#define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) - -/** @brief Macro to configure DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @param __SOURCE__ specifies the DFSDM2 Audio clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_DFSDM2AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM2ASEL, (__SOURCE__))) - -/** @brief Macro to Get DFSDM2 Audio clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_GET_DFSDM2AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM2ASEL)) - -/** @brief Macro to configure SAI1BlockA clock source selection. - * @note The SAI peripheral is only available with STM32F413xx/STM32F423xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_EXT: External clock mapped on the I2S_CKIN pinused as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 BlockA clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_EXT: External clock mapped on the I2S_CKIN pinused as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_SAI_BLOCKA_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC)) - -/** @brief Macro to configure SAI1 BlockB clock source selection. - * @note The SAI peripheral is only available with STM32F413xx/STM32F423xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block B clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 BlockB clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_SAI_BLOCKB_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC)) - -/** @brief Macro to configure the LPTIM1 clock. - * @param __SOURCE__ specifies the LPTIM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the LPTIM1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)) -#endif /* STM32F413xx || STM32F423xx */ - -/** @brief Macro to configure I2S APB1 clock source selection. - * @param __SOURCE__ specifies the I2S APB1 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB1 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) - -/** @brief Macro to configure I2S APB2 clock source selection. - * @param __SOURCE__ specifies the I2S APB2 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB2 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) - -/** @brief Macro to configure the PLL I2S clock source (PLLI2SCLK). - * @note This macro must be called before enabling the I2S APB clock. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLI2SCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - * @arg RCC_PLLI2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin - * used as I2S clock source. - */ -#define __HAL_RCC_PLL_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_PLLI2SCFGR_PLLI2SSRC_BB = (__SOURCE__)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) - -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @brief Macro to configure I2S clock source selection. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR. - * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC. - */ -#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC, (__SOURCE__))) - -/** @brief Macro to Get I2S clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR. - * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC. - */ -#define __HAL_RCC_GET_I2S_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the LPTIM1 clock. - * @param __SOURCE__ specifies the LPTIM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK1 selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the LPTIM1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK1 selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the Timers clocks prescalers - * @note This feature is only available with STM32F429x/439x Devices. - * @param __PRESC__ specifies the Timers clocks prescalers selection - * This parameter can be one of the following values: - * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1 or 2, - * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to - * division by 4 or more. - * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, - * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding - * to division by 8 or more. - */ -#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__)) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||\ - STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx ||\ - STM32F423xx */ - -/*----------------------------------------------------------------------------*/ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Enable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Disable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE)) - -/** @brief Clear the PLLSAI RDY interrupt pending bits. - */ -#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF)) - -/** @brief Check the PLLSAI RDY interrupt has occurred or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Check PLLSAI RDY flag is set or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY)) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @brief Macros to enable or disable the RCC MCO1 feature. - */ -#define __HAL_RCC_MCO1_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = ENABLE) -#define __HAL_RCC_MCO1_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = DISABLE) - -/** @brief Macros to enable or disable the RCC MCO2 feature. - */ -#define __HAL_RCC_MCO2_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = ENABLE) -#define __HAL_RCC_MCO2_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = DISABLE) - -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCCEx_Exported_Functions - * @{ - */ - -/** @addtogroup RCCEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); - -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -void HAL_RCCEx_SelectLSEMode(uint8_t Mode); -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -#if defined(RCC_PLLI2S_SUPPORT) -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void); -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void); -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Constants RCCEx Private Constants - * @{ - */ - -/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -/* --- CR Register ---*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/* Alias word address of PLLSAION bit */ -#define RCC_PLLSAION_BIT_NUMBER 0x1CU -#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLSAION_BIT_NUMBER * 4U)) - -#define PLLSAI_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/* Alias word address of PLLI2SON bit */ -#define RCC_PLLI2SON_BIT_NUMBER 0x1AU -#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLI2SON_BIT_NUMBER * 4U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/* --- DCKCFGR Register ---*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ - defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/* Alias word address of TIMPRE bit */ -#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8CU) -#define RCC_TIMPRE_BIT_NUMBER 0x18U -#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32U) + (RCC_TIMPRE_BIT_NUMBER * 4U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F410xx || STM32F401xC ||\ - STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/* --- CFGR Register ---*/ -#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08U) -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) -/* Alias word address of I2SSRC bit */ -#define RCC_I2SSRC_BIT_NUMBER 0x17U -#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_I2SSRC_BIT_NUMBER * 4U)) - -#define PLLI2S_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/* --- PLLI2SCFGR Register ---*/ -#define RCC_PLLI2SCFGR_OFFSET (RCC_OFFSET + 0x84U) -/* Alias word address of PLLI2SSRC bit */ -#define RCC_PLLI2SSRC_BIT_NUMBER 0x16U -#define RCC_PLLI2SCFGR_PLLI2SSRC_BB (PERIPH_BB_BASE + (RCC_PLLI2SCFGR_OFFSET * 32U) + (RCC_PLLI2SSRC_BIT_NUMBER * 4U)) - -#define PLLI2S_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx | STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/* Alias word address of MCO1EN bit */ -#define RCC_MCO1EN_BIT_NUMBER 0x8U -#define RCC_CFGR_MCO1EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_MCO1EN_BIT_NUMBER * 4U)) - -/* Alias word address of MCO2EN bit */ -#define RCC_MCO2EN_BIT_NUMBER 0x9U -#define RCC_CFGR_MCO2EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_MCO2EN_BIT_NUMBER * 4U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#define PLL_TIMEOUT_VALUE 2U /* 2 ms */ -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Macros RCCEx Private Macros - * @{ - */ -/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) -#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000007FU)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00000007U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000000FU)) -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000001FU)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F446xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00000FFFU)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x000001FFU)) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x000003FFU)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00007FFFU)) -#endif /* STM32F413xx || STM32F423xx */ - -#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) - -#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\ - ((VALUE) == RCC_PLLSAIDIVR_4) ||\ - ((VALUE) == RCC_PLLSAIDIVR_8) ||\ - ((VALUE) == RCC_PLLSAIDIVR_16)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PLLI2SM_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 63U)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) -#endif /* STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) - -#define IS_RCC_I2SAPBCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPBCLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLSRC)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F446xx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\ - ((VALUE) == RCC_PLLI2SP_DIV4) ||\ - ((VALUE) == RCC_PLLI2SP_DIV6) ||\ - ((VALUE) == RCC_PLLI2SP_DIV8)) - -#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63U) - -#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ - ((VALUE) == RCC_PLLSAIP_DIV4) ||\ - ((VALUE) == RCC_PLLSAIP_DIV6) ||\ - ((VALUE) == RCC_PLLSAIP_DIV8)) - -#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_EXT)) - -#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC)) - -#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) - - #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_CECCLKSOURCE_LSE)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ - ((VALUE) == RCC_PLLSAIP_DIV4) ||\ - ((VALUE) == RCC_PLLSAIP_DIV6) ||\ - ((VALUE) == RCC_PLLSAIP_DIV8)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLI2SCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLI2SCLKSOURCE_PLLSRC) || \ - ((__SOURCE__) == RCC_PLLI2SCLKSOURCE_EXT)) - -#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) - - #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLI2SQ)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_PCLK2) || \ - ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2S1) || \ - ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2S2)) - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_DFSDM2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM2CLKSOURCE_PCLK2) || \ - ((__SOURCE__) == RCC_DFSDM2CLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM2AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM2AUDIOCLKSOURCE_I2S1) || \ - ((__SOURCE__) == RCC_DFSDM2AUDIOCLKSOURCE_I2S2)) - -#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) - -#define IS_RCC_SAIACLKSOURCE(SOURCE) (((SOURCE) == RCC_SAIACLKSOURCE_PLLI2SR) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_PLLSRC)) - -#define IS_RCC_SAIBCLKSOURCE(SOURCE) (((SOURCE) == RCC_SAIBCLKSOURCE_PLLI2SR) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_PLLSRC)) - -#define IS_RCC_PLL_DIVR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLI2S_DIVR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#endif /* STM32F413xx || STM32F423xx */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) - -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \ - ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \ - STM32F412Rx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_I2SCLK)|| \ - ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RCC_EX_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h deleted file mode 100644 index d7997a3..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h +++ /dev/null @@ -1,729 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_spi.h - * @author MCD Application Team - * @brief Header file of SPI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_SPI_H -#define STM32F4xx_HAL_SPI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SPI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SPI_Exported_Types SPI Exported Types - * @{ - */ - -/** - * @brief SPI Configuration Structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Specifies the SPI operating mode. - This parameter can be a value of @ref SPI_Mode */ - - uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. - This parameter can be a value of @ref SPI_Direction */ - - uint32_t DataSize; /*!< Specifies the SPI data size. - This parameter can be a value of @ref SPI_Data_Size */ - - uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. - This parameter can be a value of @ref SPI_Clock_Polarity */ - - uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. - This parameter can be a value of @ref SPI_Clock_Phase */ - - uint32_t NSS; /*!< Specifies whether the NSS signal is managed by - hardware (NSS pin) or by software using the SSI bit. - This parameter can be a value of @ref SPI_Slave_Select_management */ - - uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be - used to configure the transmit and receive SCK clock. - This parameter can be a value of @ref SPI_BaudRate_Prescaler - @note The communication clock is derived from the master - clock. The slave clock does not need to be set. */ - - uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. - This parameter can be a value of @ref SPI_MSB_LSB_transmission */ - - uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. - This parameter can be a value of @ref SPI_TI_mode */ - - uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. - This parameter can be a value of @ref SPI_CRC_Calculation */ - - uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. - This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ -} SPI_InitTypeDef; - -/** - * @brief HAL SPI State structure definition - */ -typedef enum -{ - HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ - HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ - HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ - HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ - HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ - HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ - HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ -} HAL_SPI_StateTypeDef; - -/** - * @brief SPI handle Structure definition - */ -typedef struct __SPI_HandleTypeDef -{ - SPI_TypeDef *Instance; /*!< SPI registers base address */ - - SPI_InitTypeDef Init; /*!< SPI communication parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< SPI Tx Transfer size */ - - __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< SPI Rx Transfer size */ - - __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ - - void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ - - void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ - - DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ - - __IO uint32_t ErrorCode; /*!< SPI Error code */ - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ - void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ - void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ - void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ - void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ - void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ - void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ - void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ - void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ - void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ - -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} SPI_HandleTypeDef; - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -/** - * @brief HAL SPI Callback ID enumeration definition - */ -typedef enum -{ - HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ - HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ - HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ - HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ - HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ - HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ - HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ - HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ - HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ - HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ - -} HAL_SPI_CallbackIDTypeDef; - -/** - * @brief HAL SPI Callback pointer definition - */ -typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ - -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SPI_Exported_Constants SPI Exported Constants - * @{ - */ - -/** @defgroup SPI_Error_Code SPI Error Code - * @{ - */ -#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ -#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ -#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ -#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ -#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY Flag */ -#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup SPI_Mode SPI Mode - * @{ - */ -#define SPI_MODE_SLAVE (0x00000000U) -#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) -/** - * @} - */ - -/** @defgroup SPI_Direction SPI Direction Mode - * @{ - */ -#define SPI_DIRECTION_2LINES (0x00000000U) -#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY -#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE -/** - * @} - */ - -/** @defgroup SPI_Data_Size SPI Data Size - * @{ - */ -#define SPI_DATASIZE_8BIT (0x00000000U) -#define SPI_DATASIZE_16BIT SPI_CR1_DFF -/** - * @} - */ - -/** @defgroup SPI_Clock_Polarity SPI Clock Polarity - * @{ - */ -#define SPI_POLARITY_LOW (0x00000000U) -#define SPI_POLARITY_HIGH SPI_CR1_CPOL -/** - * @} - */ - -/** @defgroup SPI_Clock_Phase SPI Clock Phase - * @{ - */ -#define SPI_PHASE_1EDGE (0x00000000U) -#define SPI_PHASE_2EDGE SPI_CR1_CPHA -/** - * @} - */ - -/** @defgroup SPI_Slave_Select_management SPI Slave Select Management - * @{ - */ -#define SPI_NSS_SOFT SPI_CR1_SSM -#define SPI_NSS_HARD_INPUT (0x00000000U) -#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) -/** - * @} - */ - -/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler - * @{ - */ -#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) -#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) -#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) -#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) -#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) -#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) -#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) -#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) -/** - * @} - */ - -/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission - * @{ - */ -#define SPI_FIRSTBIT_MSB (0x00000000U) -#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST -/** - * @} - */ - -/** @defgroup SPI_TI_mode SPI TI Mode - * @{ - */ -#define SPI_TIMODE_DISABLE (0x00000000U) -#define SPI_TIMODE_ENABLE SPI_CR2_FRF -/** - * @} - */ - -/** @defgroup SPI_CRC_Calculation SPI CRC Calculation - * @{ - */ -#define SPI_CRCCALCULATION_DISABLE (0x00000000U) -#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN -/** - * @} - */ - -/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition - * @{ - */ -#define SPI_IT_TXE SPI_CR2_TXEIE -#define SPI_IT_RXNE SPI_CR2_RXNEIE -#define SPI_IT_ERR SPI_CR2_ERRIE -/** - * @} - */ - -/** @defgroup SPI_Flags_definition SPI Flags Definition - * @{ - */ -#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ -#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ -#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ -#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ -#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ -#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ -#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ -#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ - | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup SPI_Exported_Macros SPI Exported Macros - * @{ - */ - -/** @brief Reset SPI handle state. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - -/** @brief Enable the specified SPI interrupts. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __INTERRUPT__ specifies the interrupt source to enable. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) - -/** @brief Disable the specified SPI interrupts. - * @param __HANDLE__ specifies the SPI handle. - * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. - * @param __INTERRUPT__ specifies the interrupt source to disable. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) - -/** @brief Check whether the specified SPI interrupt source is enabled or not. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __INTERRUPT__ specifies the SPI interrupt source to check. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ - & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified SPI flag is set or not. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg SPI_FLAG_RXNE: Receive buffer not empty flag - * @arg SPI_FLAG_TXE: Transmit buffer empty flag - * @arg SPI_FLAG_CRCERR: CRC error flag - * @arg SPI_FLAG_MODF: Mode fault flag - * @arg SPI_FLAG_OVR: Overrun flag - * @arg SPI_FLAG_BSY: Busy flag - * @arg SPI_FLAG_FRE: Frame format error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the SPI CRCERR pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) - -/** @brief Clear the SPI MODF pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg_modf = 0x00U; \ - tmpreg_modf = (__HANDLE__)->Instance->SR; \ - CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ - UNUSED(tmpreg_modf); \ - } while(0U) - -/** @brief Clear the SPI OVR pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg_ovr = 0x00U; \ - tmpreg_ovr = (__HANDLE__)->Instance->DR; \ - tmpreg_ovr = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg_ovr); \ - } while(0U) - -/** @brief Clear the SPI FRE pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg_fre = 0x00U; \ - tmpreg_fre = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg_fre); \ - }while(0U) - -/** @brief Enable the SPI peripheral. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) - -/** @brief Disable the SPI peripheral. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SPI_Private_Macros SPI Private Macros - * @{ - */ - -/** @brief Set the SPI transmit-only mode. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) - -/** @brief Set the SPI receive-only mode. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) - -/** @brief Reset the CRC calculation of the SPI. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ - SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U) - -/** @brief Check whether the specified SPI flag is set or not. - * @param __SR__ copy of SPI SR register. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg SPI_FLAG_RXNE: Receive buffer not empty flag - * @arg SPI_FLAG_TXE: Transmit buffer empty flag - * @arg SPI_FLAG_CRCERR: CRC error flag - * @arg SPI_FLAG_MODF: Mode fault flag - * @arg SPI_FLAG_OVR: Overrun flag - * @arg SPI_FLAG_BSY: Busy flag - * @arg SPI_FLAG_FRE: Frame format error flag - * @retval SET or RESET. - */ -#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ - ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) - -/** @brief Check whether the specified SPI Interrupt is set or not. - * @param __CR2__ copy of SPI CR2 register. - * @param __INTERRUPT__ specifies the SPI interrupt source to check. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval SET or RESET. - */ -#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \ - (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks if SPI Mode parameter is in allowed range. - * @param __MODE__ specifies the SPI Mode. - * This parameter can be a value of @ref SPI_Mode - * @retval None - */ -#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ - ((__MODE__) == SPI_MODE_MASTER)) - -/** @brief Checks if SPI Direction Mode parameter is in allowed range. - * @param __MODE__ specifies the SPI Direction Mode. - * This parameter can be a value of @ref SPI_Direction - * @retval None - */ -#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ - ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ - ((__MODE__) == SPI_DIRECTION_1LINE)) - -/** @brief Checks if SPI Direction Mode parameter is 2 lines. - * @param __MODE__ specifies the SPI Direction Mode. - * @retval None - */ -#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) - -/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. - * @param __MODE__ specifies the SPI Direction Mode. - * @retval None - */ -#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ - ((__MODE__) == SPI_DIRECTION_1LINE)) - -/** @brief Checks if SPI Data Size parameter is in allowed range. - * @param __DATASIZE__ specifies the SPI Data Size. - * This parameter can be a value of @ref SPI_Data_Size - * @retval None - */ -#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_8BIT)) - -/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. - * @param __CPOL__ specifies the SPI serial clock steady state. - * This parameter can be a value of @ref SPI_Clock_Polarity - * @retval None - */ -#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ - ((__CPOL__) == SPI_POLARITY_HIGH)) - -/** @brief Checks if SPI Clock Phase parameter is in allowed range. - * @param __CPHA__ specifies the SPI Clock Phase. - * This parameter can be a value of @ref SPI_Clock_Phase - * @retval None - */ -#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ - ((__CPHA__) == SPI_PHASE_2EDGE)) - -/** @brief Checks if SPI Slave Select parameter is in allowed range. - * @param __NSS__ specifies the SPI Slave Select management parameter. - * This parameter can be a value of @ref SPI_Slave_Select_management - * @retval None - */ -#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ - ((__NSS__) == SPI_NSS_HARD_INPUT) || \ - ((__NSS__) == SPI_NSS_HARD_OUTPUT)) - -/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. - * @param __PRESCALER__ specifies the SPI Baudrate prescaler. - * This parameter can be a value of @ref SPI_BaudRate_Prescaler - * @retval None - */ -#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) - -/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. - * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). - * This parameter can be a value of @ref SPI_MSB_LSB_transmission - * @retval None - */ -#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ - ((__BIT__) == SPI_FIRSTBIT_LSB)) - -/** @brief Checks if SPI TI mode parameter is in allowed range. - * @param __MODE__ specifies the SPI TI mode. - * This parameter can be a value of @ref SPI_TI_mode - * @retval None - */ -#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ - ((__MODE__) == SPI_TIMODE_ENABLE)) - -/** @brief Checks if SPI CRC calculation enabled state is in allowed range. - * @param __CALCULATION__ specifies the SPI CRC calculation enable state. - * This parameter can be a value of @ref SPI_CRC_Calculation - * @retval None - */ -#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ - ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) - -/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. - * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. - * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 - * @retval None - */ -#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \ - ((__POLYNOMIAL__) <= 0xFFFFU) && \ - (((__POLYNOMIAL__)&0x1U) != 0U)) - -/** @brief Checks if DMA handle is valid. - * @param __HANDLE__ specifies a DMA Handle. - * @retval None - */ -#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SPI_Exported_Functions - * @{ - */ - -/** @addtogroup SPI_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); -void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); -void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, - pSPI_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup SPI_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ -HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, - uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size); -HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); -/* Transfer Abort functions */ -HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); - -void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); -/** - * @} - */ - -/** @addtogroup SPI_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State and Error functions ***************************************/ -HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); -uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_SPI_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h deleted file mode 100644 index 8c81414..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h +++ /dev/null @@ -1,2146 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim.h - * @author MCD Application Team - * @brief Header file of TIM HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_TIM_H -#define STM32F4xx_HAL_TIM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIM_Exported_Types TIM Exported Types - * @{ - */ - -/** - * @brief TIM Time base Configuration Structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint32_t Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ - - uint32_t ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_ClockDivision */ - - uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - GP timers: this parameter must be a number between Min_Data = 0x00 and - Max_Data = 0xFF. - Advanced timers: this parameter must be a number between Min_Data = 0x0000 and - Max_Data = 0xFFFF. */ - - uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. - This parameter can be a value of @ref TIM_AutoReloadPreload */ -} TIM_Base_InitTypeDef; - -/** - * @brief TIM Output Compare Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCFastMode; /*!< Specifies the Fast mode state. - This parameter can be a value of @ref TIM_Output_Fast_State - @note This parameter is valid only in PWM1 and PWM2 mode. */ - - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ -} TIM_OC_InitTypeDef; - -/** - * @brief TIM One Pulse Mode Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_OnePulse_InitTypeDef; - -/** - * @brief TIM Input Capture Configuration Structure definition - */ -typedef struct -{ - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_IC_InitTypeDef; - -/** - * @brief TIM Encoder Configuration Structure definition - */ -typedef struct -{ - uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Mode */ - - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ - - uint32_t IC1Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ - - uint32_t IC2Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC2Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_Encoder_InitTypeDef; - -/** - * @brief Clock Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClockSource; /*!< TIM clock sources - This parameter can be a value of @ref TIM_Clock_Source */ - uint32_t ClockPolarity; /*!< TIM clock polarity - This parameter can be a value of @ref TIM_Clock_Polarity */ - uint32_t ClockPrescaler; /*!< TIM clock prescaler - This parameter can be a value of @ref TIM_Clock_Prescaler */ - uint32_t ClockFilter; /*!< TIM clock filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_ClockConfigTypeDef; - -/** - * @brief TIM Clear Input Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClearInputState; /*!< TIM clear Input state - This parameter can be ENABLE or DISABLE */ - uint32_t ClearInputSource; /*!< TIM clear Input sources - This parameter can be a value of @ref TIM_ClearInput_Source */ - uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity - This parameter can be a value of @ref TIM_ClearInput_Polarity */ - uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler - This parameter must be 0: When OCRef clear feature is used with ETR source, - ETR prescaler must be off */ - uint32_t ClearInputFilter; /*!< TIM Clear Input filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_ClearInputConfigTypeDef; - -/** - * @brief TIM Master configuration Structure definition - */ -typedef struct -{ - uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection - This parameter can be a value of @ref TIM_Master_Mode_Selection */ - uint32_t MasterSlaveMode; /*!< Master/slave mode selection - This parameter can be a value of @ref TIM_Master_Slave_Mode - @note When the Master/slave mode is enabled, the effect of - an event on the trigger input (TRGI) is delayed to allow a - perfect synchronization between the current timer and its - slaves (through TRGO). It is not mandatory in case of timer - synchronization mode. */ -} TIM_MasterConfigTypeDef; - -/** - * @brief TIM Slave configuration Structure definition - */ -typedef struct -{ - uint32_t SlaveMode; /*!< Slave mode selection - This parameter can be a value of @ref TIM_Slave_Mode */ - uint32_t InputTrigger; /*!< Input Trigger source - This parameter can be a value of @ref TIM_Trigger_Selection */ - uint32_t TriggerPolarity; /*!< Input Trigger polarity - This parameter can be a value of @ref TIM_Trigger_Polarity */ - uint32_t TriggerPrescaler; /*!< Input trigger prescaler - This parameter can be a value of @ref TIM_Trigger_Prescaler */ - uint32_t TriggerFilter; /*!< Input trigger filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - -} TIM_SlaveConfigTypeDef; - -/** - * @brief TIM Break input(s) and Dead time configuration Structure definition - * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable - * filter and polarity. - */ -typedef struct -{ - uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ - - uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ - - uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ - - uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - - uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ - - uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ - - uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ - -} TIM_BreakDeadTimeConfigTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ - HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ - HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ - HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ -} HAL_TIM_StateTypeDef; - -/** - * @brief TIM Channel States definition - */ -typedef enum -{ - HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ - HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ - HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ -} HAL_TIM_ChannelStateTypeDef; - -/** - * @brief DMA Burst States definition - */ -typedef enum -{ - HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ - HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ - HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ -} HAL_TIM_DMABurstStateTypeDef; - -/** - * @brief HAL Active channel structures definition - */ -typedef enum -{ - HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ - HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ - HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ - HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ - HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ -} HAL_TIM_ActiveChannel; - -/** - * @brief TIM Time Base Handle Structure definition - */ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -typedef struct __TIM_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -{ - TIM_TypeDef *Instance; /*!< Register base address */ - TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ - HAL_TIM_ActiveChannel Channel; /*!< Active channel */ - DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array - This array is accessed by a @ref DMA_Handle_index */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ - __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ - __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ - __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ - void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ - void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ - void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ - void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ - void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ - void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ - void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ - void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ - void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ - void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ - void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ - void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ - void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ - void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ - void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ - void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ - void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ - void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ - void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ - void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ - void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ - void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ - void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ - void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ - void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ - void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} TIM_HandleTypeDef; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief HAL TIM Callback ID enumeration definition - */ -typedef enum -{ - HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ - , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ - , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ - , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ - , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ - , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ - , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ - , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ - , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ - , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ - , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ - , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ - , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ - , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ - , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ - , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ - , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ - , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ - - , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ - , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ - , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ - , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ - , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ - , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ - , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ - , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ - , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ -} HAL_TIM_CallbackIDTypeDef; - -/** - * @brief HAL TIM Callback pointer definition - */ -typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ - -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIM_Exported_Constants TIM Exported Constants - * @{ - */ - -/** @defgroup TIM_ClearInput_Source TIM Clear Input Source - * @{ - */ -#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ -#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address TIM DMA Base Address - * @{ - */ -#define TIM_DMABASE_CR1 0x00000000U -#define TIM_DMABASE_CR2 0x00000001U -#define TIM_DMABASE_SMCR 0x00000002U -#define TIM_DMABASE_DIER 0x00000003U -#define TIM_DMABASE_SR 0x00000004U -#define TIM_DMABASE_EGR 0x00000005U -#define TIM_DMABASE_CCMR1 0x00000006U -#define TIM_DMABASE_CCMR2 0x00000007U -#define TIM_DMABASE_CCER 0x00000008U -#define TIM_DMABASE_CNT 0x00000009U -#define TIM_DMABASE_PSC 0x0000000AU -#define TIM_DMABASE_ARR 0x0000000BU -#define TIM_DMABASE_RCR 0x0000000CU -#define TIM_DMABASE_CCR1 0x0000000DU -#define TIM_DMABASE_CCR2 0x0000000EU -#define TIM_DMABASE_CCR3 0x0000000FU -#define TIM_DMABASE_CCR4 0x00000010U -#define TIM_DMABASE_BDTR 0x00000011U -#define TIM_DMABASE_DCR 0x00000012U -#define TIM_DMABASE_DMAR 0x00000013U -/** - * @} - */ - -/** @defgroup TIM_Event_Source TIM Event Source - * @{ - */ -#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ -#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ -#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ -#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ -#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ -#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ -#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ -#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ -/** - * @} - */ - -/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity - * @{ - */ -#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Polarity TIM ETR Polarity - * @{ - */ -#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ -#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler - * @{ - */ -#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ -#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ -#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ -#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode TIM Counter Mode - * @{ - */ -#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ -#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ -#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ -#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ -#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ -/** - * @} - */ - -/** @defgroup TIM_ClockDivision TIM Clock Division - * @{ - */ -#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ -#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ -#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_State TIM Output Compare State - * @{ - */ -#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ -#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ -/** - * @} - */ - -/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload - * @{ - */ -#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ -#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ - -/** - * @} - */ - -/** @defgroup TIM_Output_Fast_State TIM Output Fast State - * @{ - */ -#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ -#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State - * @{ - */ -#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ -#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity - * @{ - */ -#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ -#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity - * @{ - */ -#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ -#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State - * @{ - */ -#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ -#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State - * @{ - */ -#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ -#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity - * @{ - */ -#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ -#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ -#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ -/** - * @} - */ - -/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity - * @{ - */ -#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ -#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection - * @{ - */ -#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ -#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler - * @{ - */ -#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ -#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ -#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ -#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode - * @{ - */ -#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ -#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode TIM Encoder Mode - * @{ - */ -#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ -#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ -#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ -/** - * @} - */ - -/** @defgroup TIM_Interrupt_definition TIM interrupt Definition - * @{ - */ -#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ -#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ -#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ -#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ -#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ -#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ -#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ -#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ -/** - * @} - */ - -/** @defgroup TIM_Commutation_Source TIM Commutation Source - * @{ - */ -#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ -#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ -/** - * @} - */ - -/** @defgroup TIM_DMA_sources TIM DMA Sources - * @{ - */ -#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ -#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ -#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ -#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ -#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ -#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ -#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ -/** - * @} - */ - -/** @defgroup TIM_CC_DMA_Request CCx DMA request selection - * @{ - */ -#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ -#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ -/** - * @} - */ - -/** @defgroup TIM_Flag_definition TIM Flag Definition - * @{ - */ -#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ -#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ -#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ -#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ -#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ -#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ -#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ -#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ -#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ -#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ -#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ -#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ -/** - * @} - */ - -/** @defgroup TIM_Channel TIM Channel - * @{ - */ -#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ -#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ -#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ -#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ -#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Source TIM Clock Source - * @{ - */ -#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ -#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ -#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ -#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ -#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ -#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ -#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ -#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ -#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ -#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Polarity TIM Clock Polarity - * @{ - */ -#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler - * @{ - */ -#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ -#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ -#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity - * @{ - */ -#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ -#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler - * @{ - */ -#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state - * @{ - */ -#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ -#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ -/** - * @} - */ - -/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state - * @{ - */ -#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ -#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ -/** - * @} - */ -/** @defgroup TIM_Lock_level TIM Lock level - * @{ - */ -#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ -#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ -#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ -#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ -/** - * @} - */ - -/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable - * @{ - */ -#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ -#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ -/** - * @} - */ - -/** @defgroup TIM_Break_Polarity TIM Break Input Polarity - * @{ - */ -#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ -#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ -/** - * @} - */ - -/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable - * @{ - */ -#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ -#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ -/** - * @} - */ - -/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection - * @{ - */ -#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ -#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ -#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ -#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ -#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ -#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ -#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ -#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode - * @{ - */ -#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ -#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode TIM Slave mode - * @{ - */ -#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ -#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ -#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ -#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ -#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes - * @{ - */ -#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ -#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ -#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ -#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ -#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ -#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ -#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ -#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Selection TIM Trigger Selection - * @{ - */ -#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ -#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ -#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ -#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ -#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ -#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ -#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ -#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ -#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity - * @{ - */ -#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler - * @{ - */ -#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ -#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ -#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection - * @{ - */ -#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ -#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length - * @{ - */ -#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -/** - * @} - */ - -/** @defgroup DMA_Handle_index TIM DMA Handle Index - * @{ - */ -#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ -#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ -#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ -#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ -#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ -#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ -#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ -/** - * @} - */ - -/** @defgroup Channel_CC_State TIM Capture/Compare Channel State - * @{ - */ -#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ -#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ -#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ -#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ -/** - * @} - */ - -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup TIM_Exported_Macros TIM Exported Macros - * @{ - */ - -/** @brief Reset TIM handle state. - * @param __HANDLE__ TIM handle. - * @retval None - */ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ - (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ - (__HANDLE__)->Base_MspInitCallback = NULL; \ - (__HANDLE__)->Base_MspDeInitCallback = NULL; \ - (__HANDLE__)->IC_MspInitCallback = NULL; \ - (__HANDLE__)->IC_MspDeInitCallback = NULL; \ - (__HANDLE__)->OC_MspInitCallback = NULL; \ - (__HANDLE__)->OC_MspDeInitCallback = NULL; \ - (__HANDLE__)->PWM_MspInitCallback = NULL; \ - (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ - (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ - } while(0) -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @brief Enable the TIM peripheral. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) - -/** - * @brief Enable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) - -/** - * @brief Disable the TIM peripheral. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ - { \ - (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ - } \ - } \ - } while(0) - -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been - * disabled - */ -#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ - { \ - (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ - } \ - } \ - } while(0) - -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled unconditionally - */ -#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) - -/** @brief Enable the specified TIM interrupt. - * @param __HANDLE__ specifies the TIM Handle. - * @param __INTERRUPT__ specifies the TIM interrupt source to enable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) - -/** @brief Disable the specified TIM interrupt. - * @param __HANDLE__ specifies the TIM Handle. - * @param __INTERRUPT__ specifies the TIM interrupt source to disable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) - -/** @brief Enable the specified DMA request. - * @param __HANDLE__ specifies the TIM Handle. - * @param __DMA__ specifies the TIM DMA request to enable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) - -/** @brief Disable the specified DMA request. - * @param __HANDLE__ specifies the TIM Handle. - * @param __DMA__ specifies the TIM DMA request to disable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) - -/** @brief Check whether the specified TIM interrupt flag is set or not. - * @param __HANDLE__ specifies the TIM Handle. - * @param __FLAG__ specifies the TIM interrupt flag to check. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) - -/** @brief Clear the specified TIM interrupt flag. - * @param __HANDLE__ specifies the TIM Handle. - * @param __FLAG__ specifies the TIM interrupt flag to clear. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** - * @brief Check whether the specified TIM interrupt source is enabled or not. - * @param __HANDLE__ TIM handle - * @param __INTERRUPT__ specifies the TIM interrupt source to check. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval The state of TIM_IT (SET or RESET). - */ -#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ - == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Clear the TIM interrupt pending bits. - * @param __HANDLE__ TIM handle - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) - -/** - * @brief Indicates whether or not the TIM Counter is used as downcounter. - * @param __HANDLE__ TIM handle. - * @retval False (Counter used as upcounter) or True (Counter used as downcounter) - * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode - * or Encoder mode. - */ -#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) - -/** - * @brief Set the TIM Prescaler on runtime. - * @param __HANDLE__ TIM handle. - * @param __PRESC__ specifies the Prescaler new value. - * @retval None - */ -#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) - -/** - * @brief Set the TIM Counter Register value on runtime. - * @param __HANDLE__ TIM handle. - * @param __COUNTER__ specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) - -/** - * @brief Get the TIM Counter Register value on runtime. - * @param __HANDLE__ TIM handle. - * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) - */ -#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) - -/** - * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. - * @param __HANDLE__ TIM handle. - * @param __AUTORELOAD__ specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ - do{ \ - (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ - (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ - } while(0) - -/** - * @brief Get the TIM Autoreload Register value on runtime. - * @param __HANDLE__ TIM handle. - * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) - */ -#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) - -/** - * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. - * @param __HANDLE__ TIM handle. - * @param __CKD__ specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT - * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT - * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT - * @retval None - */ -#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ - do{ \ - (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ - (__HANDLE__)->Instance->CR1 |= (__CKD__); \ - (__HANDLE__)->Init.ClockDivision = (__CKD__); \ - } while(0) - -/** - * @brief Get the TIM Clock Division value on runtime. - * @param __HANDLE__ TIM handle. - * @retval The clock division can be one of the following values: - * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT - * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT - * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT - */ -#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) - -/** - * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() - * function. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __ICPSC__ specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ - do{ \ - TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ - } while(0) - -/** - * @brief Get the TIM Input Capture prescaler on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get input capture 1 prescaler value - * @arg TIM_CHANNEL_2: get input capture 2 prescaler value - * @arg TIM_CHANNEL_3: get input capture 3 prescaler value - * @arg TIM_CHANNEL_4: get input capture 4 prescaler value - * @retval The input capture prescaler can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - */ -#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ - (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) - -/** - * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __COMPARE__ specifies the Capture Compare register new value. - * @retval None - */ -#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ - ((__HANDLE__)->Instance->CCR4 = (__COMPARE__))) - -/** - * @brief Get the TIM Capture Compare Register value on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channel associated with the capture compare register - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get capture/compare 1 register value - * @arg TIM_CHANNEL_2: get capture/compare 2 register value - * @arg TIM_CHANNEL_3: get capture/compare 3 register value - * @arg TIM_CHANNEL_4: get capture/compare 4 register value - * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) - */ -#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ - ((__HANDLE__)->Instance->CCR4)) - -/** - * @brief Set the TIM Output compare preload. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval None - */ -#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ - ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE)) - -/** - * @brief Reset the TIM Output compare preload. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval None - */ -#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ - ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE)) - -/** - * @brief Enable fast mode for a given channel. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @note When fast mode is enabled an active edge on the trigger input acts - * like a compare match on CCx output. Delay to sample the trigger - * input and to activate CCx output is reduced to 3 clock cycles. - * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. - * @retval None - */ -#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ - ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE)) - -/** - * @brief Disable fast mode for a given channel. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @note When fast mode is disabled CCx output behaves normally depending - * on counter and CCRx values even when the trigger is ON. The minimum - * delay to activate CCx output when an active edge occurs on the - * trigger input is 5 clock cycles. - * @retval None - */ -#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ - ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE)) - -/** - * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. - * @param __HANDLE__ TIM handle. - * @note When the URS bit of the TIMx_CR1 register is set, only counter - * overflow/underflow generates an update interrupt or DMA request (if - * enabled) - * @retval None - */ -#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) - -/** - * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. - * @param __HANDLE__ TIM handle. - * @note When the URS bit of the TIMx_CR1 register is reset, any of the - * following events generate an update interrupt or DMA request (if - * enabled): - * _ Counter overflow underflow - * _ Setting the UG bit - * _ Update generation through the slave mode controller - * @retval None - */ -#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) - -/** - * @brief Set the TIM Capture x input polarity on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __POLARITY__ Polarity for TIx source - * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge - * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge - * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge - * @retval None - */ -#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - do{ \ - TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ - }while(0) - -/** @brief Select the Capture/compare DMA request source. - * @param __HANDLE__ specifies the TIM Handle. - * @param __CCDMA__ specifies Capture/compare DMA request source - * This parameter can be one of the following values: - * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event - * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event - * @retval None - */ -#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ - MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) - -/** - * @} - */ -/* End of exported macros ----------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup TIM_Private_Constants TIM Private Constants - * @{ - */ -/* The counter of a timer instance is disabled only if all the CCx and CCxN - channels have been disabled */ -#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) -#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) -/** - * @} - */ -/* End of private constants --------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup TIM_Private_Macros TIM Private Macros - * @{ - */ -#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ - ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) - -#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ - ((__BASE__) == TIM_DMABASE_CR2) || \ - ((__BASE__) == TIM_DMABASE_SMCR) || \ - ((__BASE__) == TIM_DMABASE_DIER) || \ - ((__BASE__) == TIM_DMABASE_SR) || \ - ((__BASE__) == TIM_DMABASE_EGR) || \ - ((__BASE__) == TIM_DMABASE_CCMR1) || \ - ((__BASE__) == TIM_DMABASE_CCMR2) || \ - ((__BASE__) == TIM_DMABASE_CCER) || \ - ((__BASE__) == TIM_DMABASE_CNT) || \ - ((__BASE__) == TIM_DMABASE_PSC) || \ - ((__BASE__) == TIM_DMABASE_ARR) || \ - ((__BASE__) == TIM_DMABASE_RCR) || \ - ((__BASE__) == TIM_DMABASE_CCR1) || \ - ((__BASE__) == TIM_DMABASE_CCR2) || \ - ((__BASE__) == TIM_DMABASE_CCR3) || \ - ((__BASE__) == TIM_DMABASE_CCR4) || \ - ((__BASE__) == TIM_DMABASE_BDTR)) - -#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) - -#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ - ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) - -#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ - ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ - ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) - -#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ - ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) - -#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ - ((__STATE__) == TIM_OCFAST_ENABLE)) - -#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ - ((__POLARITY__) == TIM_OCPOLARITY_LOW)) - -#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ - ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) - -#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ - ((__STATE__) == TIM_OCIDLESTATE_RESET)) - -#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ - ((__STATE__) == TIM_OCNIDLESTATE_RESET)) - -#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) - -#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ - ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) - -#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ - ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ - ((__SELECTION__) == TIM_ICSELECTION_TRC)) - -#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV8)) - -#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ - ((__MODE__) == TIM_OPMODE_REPETITIVE)) - -#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ - ((__MODE__) == TIM_ENCODERMODE_TI2) || \ - ((__MODE__) == TIM_ENCODERMODE_TI12)) - -#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) - -#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2) || \ - ((__CHANNEL__) == TIM_CHANNEL_3) || \ - ((__CHANNEL__) == TIM_CHANNEL_4) || \ - ((__CHANNEL__) == TIM_CHANNEL_ALL)) - -#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2)) - -#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2) || \ - ((__CHANNEL__) == TIM_CHANNEL_3)) - -#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) - -#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) - -#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) - -#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ - ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) - -#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) - -#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ - ((__STATE__) == TIM_OSSR_DISABLE)) - -#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ - ((__STATE__) == TIM_OSSI_DISABLE)) - -#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_3)) - -#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) - - -#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ - ((__STATE__) == TIM_BREAK_DISABLE)) - -#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) - -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ - ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) - -#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ - ((__SOURCE__) == TIM_TRGO_ENABLE) || \ - ((__SOURCE__) == TIM_TRGO_UPDATE) || \ - ((__SOURCE__) == TIM_TRGO_OC1) || \ - ((__SOURCE__) == TIM_TRGO_OC1REF) || \ - ((__SOURCE__) == TIM_TRGO_OC2REF) || \ - ((__SOURCE__) == TIM_TRGO_OC3REF) || \ - ((__SOURCE__) == TIM_TRGO_OC4REF)) - -#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ - ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) - -#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ - ((__MODE__) == TIM_SLAVEMODE_RESET) || \ - ((__MODE__) == TIM_SLAVEMODE_GATED) || \ - ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ - ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1)) - -#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ - ((__MODE__) == TIM_OCMODE_PWM2)) - -#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ - ((__MODE__) == TIM_OCMODE_ACTIVE) || \ - ((__MODE__) == TIM_OCMODE_INACTIVE) || \ - ((__MODE__) == TIM_OCMODE_TOGGLE) || \ - ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ - ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) - -#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ - ((__SELECTION__) == TIM_TS_TI1F_ED) || \ - ((__SELECTION__) == TIM_TS_TI1FP1) || \ - ((__SELECTION__) == TIM_TS_TI2FP2) || \ - ((__SELECTION__) == TIM_TS_ETRF)) - -#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ - ((__SELECTION__) == TIM_TS_NONE)) - -#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) - -#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) - -#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ - ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) - -#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) - -#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) - -#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) - -#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) - -#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ - ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) - -#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ - ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) - -#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ - ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) - -#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ - ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) - -#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ - (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ - (__HANDLE__)->ChannelState[3]) - -#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ - ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) - -#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ - (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ - } while(0) - -#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ - (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ - (__HANDLE__)->ChannelNState[3]) - -#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ - ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) - -#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ - (__HANDLE__)->ChannelNState[0] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[1] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[2] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[3] = \ - (__CHANNEL_STATE__); \ - } while(0) - -/** - * @} - */ -/* End of private macros -----------------------------------------------------*/ - -/* Include TIM HAL Extended module */ -#include "stm32f4xx_hal_tim_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions - * @brief Time Base functions - * @{ - */ -/* Time Base functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions - * @brief TIM Output Compare functions - * @{ - */ -/* Timer Output Compare functions *********************************************/ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions - * @brief TIM PWM functions - * @{ - */ -/* Timer PWM functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions - * @brief TIM Input Capture functions - * @{ - */ -/* Timer Input Capture functions **********************************************/ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions - * @brief TIM One Pulse functions - * @{ - */ -/* Timer One Pulse functions **************************************************/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions - * @brief TIM Encoder functions - * @{ - */ -/* Timer Encoder functions ****************************************************/ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, - uint32_t *pData2, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief IRQ handler management - * @{ - */ -/* Interrupt Handler functions ***********************************************/ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -/* Control functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, - uint32_t OutputChannel, uint32_t InputChannel); -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, - uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * @{ - */ -/* Callback in non blocking modes (Interrupt and DMA) *************************/ -void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, - pTIM_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); - -/* Peripheral Channel state functions ************************************************/ -HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); -HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); - -void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); -void TIM_DMAError(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); -void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -void TIM_ResetCallback(TIM_HandleTypeDef *htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_TIM_H */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h deleted file mode 100644 index 39fb500..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h +++ /dev/null @@ -1,354 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim_ex.h - * @author MCD Application Team - * @brief Header file of TIM HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_TIM_EX_H -#define STM32F4xx_HAL_TIM_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIMEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types - * @{ - */ - -/** - * @brief TIM Hall sensor Configuration Structure definition - */ - -typedef struct -{ - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ -} TIM_HallSensor_InitTypeDef; -/** - * @} - */ -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants - * @{ - */ - -/** @defgroup TIMEx_Remap TIM Extended Remapping - * @{ - */ -#if defined (TIM2) -#if defined(TIM8) -#define TIM_TIM2_TIM8_TRGO 0x00000000U /*!< TIM2 ITR1 is connected to TIM8 TRGO */ -#else -#define TIM_TIM2_ETH_PTP TIM_OR_ITR1_RMP_0 /*!< TIM2 ITR1 is connected to PTP trigger output */ -#endif /* TIM8 */ -#define TIM_TIM2_USBFS_SOF TIM_OR_ITR1_RMP_1 /*!< TIM2 ITR1 is connected to OTG FS SOF */ -#define TIM_TIM2_USBHS_SOF (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0) /*!< TIM2 ITR1 is connected to OTG HS SOF */ -#endif /* TIM2 */ - -#define TIM_TIM5_GPIO 0x00000000U /*!< TIM5 TI4 is connected to GPIO */ -#define TIM_TIM5_LSI TIM_OR_TI4_RMP_0 /*!< TIM5 TI4 is connected to LSI */ -#define TIM_TIM5_LSE TIM_OR_TI4_RMP_1 /*!< TIM5 TI4 is connected to LSE */ -#define TIM_TIM5_RTC (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0) /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */ - -#define TIM_TIM11_GPIO 0x00000000U /*!< TIM11 TI1 is connected to GPIO */ -#define TIM_TIM11_HSE TIM_OR_TI1_RMP_1 /*!< TIM11 TI1 is connected to HSE_RTC clock */ -#if defined(SPDIFRX) -#define TIM_TIM11_SPDIFRX TIM_OR_TI1_RMP_0 /*!< TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC */ -#endif /* SPDIFRX*/ - -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) -#define LPTIM_REMAP_MASK 0x10000000U - -#define TIM_TIM9_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM9 ITR1 is connected to TIM3 TRGO */ -#define TIM_TIM9_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP) /*!< TIM9 ITR1 is connected to LPTIM1 output */ - -#define TIM_TIM5_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM5 ITR1 is connected to TIM3 TRGO */ -#define TIM_TIM5_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP) /*!< TIM5 ITR1 is connected to LPTIM1 output */ - -#define TIM_TIM1_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM1 ITR2 is connected to TIM3 TRGO */ -#define TIM_TIM1_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP) /*!< TIM1 ITR2 is connected to LPTIM1 output */ -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ -/** - * @} - */ - -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros - * @{ - */ - -/** - * @} - */ -/* End of exported macro -----------------------------------------------------*/ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros - * @{ - */ -#if defined(SPDIFRX) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_SPDIFRX) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#elif defined(TIM2) -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE))) || \ - (((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM1_LPTIM))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM5_LPTIM))) || \ - (((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM9_LPTIM)))) -#elif defined(TIM8) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#else -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETH_PTP) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ -#else -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#endif /* SPDIFRX */ - -/** - * @} - */ -/* End of private macro ------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions - * @{ - */ - -/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * @{ - */ -/* Timer Hall Sensor functions **********************************************/ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); - -void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); - -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * @{ - */ -/* Timer Complementary Output Compare functions *****************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * @{ - */ -/* Timer Complementary PWM functions ****************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * @{ - */ -/* Timer Complementary One Pulse functions **********************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -/* Extended Control functions ************************************************/ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - TIM_MasterConfigTypeDef *sMasterConfig); -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions - * @brief Extended Callbacks functions - * @{ - */ -/* Extended Callback **********************************************************/ -void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions - * @brief Extended Peripheral State functions - * @{ - */ -/* Extended Peripheral State functions ***************************************/ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions - * @{ - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); -void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_TIM_EX_H */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h deleted file mode 100644 index 5083c10..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h +++ /dev/null @@ -1,2105 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_bus.h - * @author MCD Application Team - * @brief Header file of BUS LL module. - - @verbatim - ##### RCC Limitations ##### - ============================================================================== - [..] - A delay between an RCC peripheral clock enable and the effective peripheral - enabling should be taken into account in order to manage the peripheral read/write - from/to registers. - (+) This delay depends on the peripheral mapping. - (++) AHB & APB peripherals, 1 dummy read is necessary - - [..] - Workarounds: - (#) For AHB & APB peripherals, a dummy read to the peripheral register has been - inserted in each LL_{BUS}_GRP{x}_EnableClock() function. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_BUS_H -#define __STM32F4xx_LL_BUS_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @defgroup BUS_LL BUS - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants - * @{ - */ - -/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH - * @{ - */ -#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU -#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHB1ENR_GPIOAEN -#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHB1ENR_GPIOBEN -#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHB1ENR_GPIOCEN -#if defined(GPIOD) -#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHB1ENR_GPIODEN -#endif /* GPIOD */ -#if defined(GPIOE) -#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHB1ENR_GPIOEEN -#endif /* GPIOE */ -#if defined(GPIOF) -#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHB1ENR_GPIOFEN -#endif /* GPIOF */ -#if defined(GPIOG) -#define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHB1ENR_GPIOGEN -#endif /* GPIOG */ -#if defined(GPIOH) -#define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHB1ENR_GPIOHEN -#endif /* GPIOH */ -#if defined(GPIOI) -#define LL_AHB1_GRP1_PERIPH_GPIOI RCC_AHB1ENR_GPIOIEN -#endif /* GPIOI */ -#if defined(GPIOJ) -#define LL_AHB1_GRP1_PERIPH_GPIOJ RCC_AHB1ENR_GPIOJEN -#endif /* GPIOJ */ -#if defined(GPIOK) -#define LL_AHB1_GRP1_PERIPH_GPIOK RCC_AHB1ENR_GPIOKEN -#endif /* GPIOK */ -#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN -#if defined(RCC_AHB1ENR_BKPSRAMEN) -#define LL_AHB1_GRP1_PERIPH_BKPSRAM RCC_AHB1ENR_BKPSRAMEN -#endif /* RCC_AHB1ENR_BKPSRAMEN */ -#if defined(RCC_AHB1ENR_CCMDATARAMEN) -#define LL_AHB1_GRP1_PERIPH_CCMDATARAM RCC_AHB1ENR_CCMDATARAMEN -#endif /* RCC_AHB1ENR_CCMDATARAMEN */ -#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN -#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN -#if defined(RCC_AHB1ENR_RNGEN) -#define LL_AHB1_GRP1_PERIPH_RNG RCC_AHB1ENR_RNGEN -#endif /* RCC_AHB1ENR_RNGEN */ -#if defined(DMA2D) -#define LL_AHB1_GRP1_PERIPH_DMA2D RCC_AHB1ENR_DMA2DEN -#endif /* DMA2D */ -#if defined(ETH) -#define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHB1ENR_ETHMACEN -#define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHB1ENR_ETHMACTXEN -#define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHB1ENR_ETHMACRXEN -#define LL_AHB1_GRP1_PERIPH_ETHMACPTP RCC_AHB1ENR_ETHMACPTPEN -#endif /* ETH */ -#if defined(USB_OTG_HS) -#define LL_AHB1_GRP1_PERIPH_OTGHS RCC_AHB1ENR_OTGHSEN -#define LL_AHB1_GRP1_PERIPH_OTGHSULPI RCC_AHB1ENR_OTGHSULPIEN -#endif /* USB_OTG_HS */ -#define LL_AHB1_GRP1_PERIPH_FLITF RCC_AHB1LPENR_FLITFLPEN -#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1LPENR_SRAM1LPEN -#if defined(RCC_AHB1LPENR_SRAM2LPEN) -#define LL_AHB1_GRP1_PERIPH_SRAM2 RCC_AHB1LPENR_SRAM2LPEN -#endif /* RCC_AHB1LPENR_SRAM2LPEN */ -#if defined(RCC_AHB1LPENR_SRAM3LPEN) -#define LL_AHB1_GRP1_PERIPH_SRAM3 RCC_AHB1LPENR_SRAM3LPEN -#endif /* RCC_AHB1LPENR_SRAM3LPEN */ -/** - * @} - */ - -#if defined(RCC_AHB2_SUPPORT) -/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH - * @{ - */ -#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(DCMI) -#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN -#endif /* DCMI */ -#if defined(CRYP) -#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN -#endif /* CRYP */ -#if defined(AES) -#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN -#endif /* AES */ -#if defined(HASH) -#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN -#endif /* HASH */ -#if defined(RCC_AHB2ENR_RNGEN) -#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN -#endif /* RCC_AHB2ENR_RNGEN */ -#if defined(USB_OTG_FS) -#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN -#endif /* USB_OTG_FS */ -/** - * @} - */ -#endif /* RCC_AHB2_SUPPORT */ - -#if defined(RCC_AHB3_SUPPORT) -/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH - * @{ - */ -#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(FSMC_Bank1) -#define LL_AHB3_GRP1_PERIPH_FSMC RCC_AHB3ENR_FSMCEN -#endif /* FSMC_Bank1 */ -#if defined(FMC_Bank1) -#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN -#endif /* FMC_Bank1 */ -#if defined(QUADSPI) -#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN -#endif /* QUADSPI */ -/** - * @} - */ -#endif /* RCC_AHB3_SUPPORT */ - -/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH - * @{ - */ -#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(TIM2) -#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN -#endif /* TIM2 */ -#if defined(TIM3) -#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN -#endif /* TIM3 */ -#if defined(TIM4) -#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN -#endif /* TIM4 */ -#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN -#if defined(TIM6) -#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN -#endif /* TIM6 */ -#if defined(TIM7) -#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN -#endif /* TIM7 */ -#if defined(TIM12) -#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN -#endif /* TIM12 */ -#if defined(TIM13) -#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN -#endif /* TIM13 */ -#if defined(TIM14) -#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN -#endif /* TIM14 */ -#if defined(LPTIM1) -#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR_LPTIM1EN -#endif /* LPTIM1 */ -#if defined(RCC_APB1ENR_RTCAPBEN) -#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR_RTCAPBEN -#endif /* RCC_APB1ENR_RTCAPBEN */ -#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN -#if defined(SPI2) -#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN -#endif /* SPI2 */ -#if defined(SPI3) -#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN -#endif /* SPI3 */ -#if defined(SPDIFRX) -#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1ENR_SPDIFRXEN -#endif /* SPDIFRX */ -#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN -#if defined(USART3) -#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN -#endif /* USART3 */ -#if defined(UART4) -#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN -#endif /* UART4 */ -#if defined(UART5) -#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN -#endif /* UART5 */ -#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN -#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN -#if defined(I2C3) -#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN -#endif /* I2C3 */ -#if defined(FMPI2C1) -#define LL_APB1_GRP1_PERIPH_FMPI2C1 RCC_APB1ENR_FMPI2C1EN -#endif /* FMPI2C1 */ -#if defined(CAN1) -#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN -#endif /* CAN1 */ -#if defined(CAN2) -#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN -#endif /* CAN2 */ -#if defined(CAN3) -#define LL_APB1_GRP1_PERIPH_CAN3 RCC_APB1ENR_CAN3EN -#endif /* CAN3 */ -#if defined(CEC) -#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN -#endif /* CEC */ -#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN -#if defined(DAC1) -#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN -#endif /* DAC1 */ -#if defined(UART7) -#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1ENR_UART7EN -#endif /* UART7 */ -#if defined(UART8) -#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1ENR_UART8EN -#endif /* UART8 */ -/** - * @} - */ - -/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH - * @{ - */ -#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU -#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN -#if defined(TIM8) -#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN -#endif /* TIM8 */ -#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN -#if defined(USART6) -#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN -#endif /* USART6 */ -#if defined(UART9) -#define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN -#endif /* UART9 */ -#if defined(UART10) -#define LL_APB2_GRP1_PERIPH_UART10 RCC_APB2ENR_UART10EN -#endif /* UART10 */ -#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN -#if defined(ADC2) -#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN -#endif /* ADC2 */ -#if defined(ADC3) -#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN -#endif /* ADC3 */ -#if defined(SDIO) -#define LL_APB2_GRP1_PERIPH_SDIO RCC_APB2ENR_SDIOEN -#endif /* SDIO */ -#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN -#if defined(SPI4) -#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN -#endif /* SPI4 */ -#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN -#if defined(RCC_APB2ENR_EXTITEN) -#define LL_APB2_GRP1_PERIPH_EXTI RCC_APB2ENR_EXTITEN -#endif /* RCC_APB2ENR_EXTITEN */ -#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN -#if defined(TIM10) -#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN -#endif /* TIM10 */ -#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN -#if defined(SPI5) -#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN -#endif /* SPI5 */ -#if defined(SPI6) -#define LL_APB2_GRP1_PERIPH_SPI6 RCC_APB2ENR_SPI6EN -#endif /* SPI6 */ -#if defined(SAI1) -#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN -#endif /* SAI1 */ -#if defined(SAI2) -#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN -#endif /* SAI2 */ -#if defined(LTDC) -#define LL_APB2_GRP1_PERIPH_LTDC RCC_APB2ENR_LTDCEN -#endif /* LTDC */ -#if defined(DSI) -#define LL_APB2_GRP1_PERIPH_DSI RCC_APB2ENR_DSIEN -#endif /* DSI */ -#if defined(DFSDM1_Channel0) -#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN -#endif /* DFSDM1_Channel0 */ -#if defined(DFSDM2_Channel0) -#define LL_APB2_GRP1_PERIPH_DFSDM2 RCC_APB2ENR_DFSDM2EN -#endif /* DFSDM2_Channel0 */ -#define LL_APB2_GRP1_PERIPH_ADC RCC_APB2RSTR_ADCRST -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions - * @{ - */ - -/** @defgroup BUS_LL_EF_AHB1 AHB1 - * @{ - */ - -/** - * @brief Enable AHB1 peripherals clock. - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB1ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB1 peripheral clock is enabled or not - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB1 peripherals clock. - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1ENR, Periphs); -} - -/** - * @brief Force AHB1 peripherals reset. - * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIODRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOERST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR RNGRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_ALL - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB1RSTR, Periphs); -} - -/** - * @brief Release AHB1 peripherals reset. - * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR RNGRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_ALL - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1RSTR, Periphs); -} - -/** - * @brief Enable AHB1 peripheral clocks in low-power mode - * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR RNGLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB1LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB1 peripheral clocks in low-power mode - * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR RNGLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1LPENR, Periphs); -} - -/** - * @} - */ - -#if defined(RCC_AHB2_SUPPORT) -/** @defgroup BUS_LL_EF_AHB2 AHB2 - * @{ - */ - -/** - * @brief Enable AHB2 peripherals clock. - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB2ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB2 peripheral clock is enabled or not - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB2 peripherals clock. - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2ENR, Periphs); -} - -/** - * @brief Force AHB2 peripherals reset. - * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB2RSTR, Periphs); -} - -/** - * @brief Release AHB2 peripherals reset. - * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2RSTR, Periphs); -} - -/** - * @brief Enable AHB2 peripheral clocks in low-power mode - * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR AESLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB2LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB2 peripheral clocks in low-power mode - * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR AESLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2LPENR, Periphs); -} - -/** - * @} - */ -#endif /* RCC_AHB2_SUPPORT */ - -#if defined(RCC_AHB3_SUPPORT) -/** @defgroup BUS_LL_EF_AHB3 AHB3 - * @{ - */ - -/** - * @brief Enable AHB3 peripherals clock. - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_EnableClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB3ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB3 peripheral clock is enabled or not - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_IsEnabledClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB3 peripherals clock. - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_DisableClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3ENR, Periphs); -} - -/** - * @brief Force AHB3 peripherals reset. - * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n - * AHB3RSTR FSMCRST LL_AHB3_GRP1_ForceReset\n - * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_ALL - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB3RSTR, Periphs); -} - -/** - * @brief Release AHB3 peripherals reset. - * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n - * AHB3RSTR FSMCRST LL_AHB3_GRP1_ReleaseReset\n - * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3RSTR, Periphs); -} - -/** - * @brief Enable AHB3 peripheral clocks in low-power mode - * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n - * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n - * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB3LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB3 peripheral clocks in low-power mode - * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n - * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n - * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3LPENR, Periphs); -} - -/** - * @} - */ -#endif /* RCC_AHB3_SUPPORT */ - -/** @defgroup BUS_LL_EF_APB1 APB1 - * @{ - */ - -/** - * @brief Enable APB1 peripherals clock. - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n - * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CECEN LL_APB1_GRP1_EnableClock\n - * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n - * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART7EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART8EN LL_APB1_GRP1_EnableClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB1ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB1ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if APB1 peripheral clock is enabled or not - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART7EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART8EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs); -} - -/** - * @brief Disable APB1 peripherals clock. - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n - * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CECEN LL_APB1_GRP1_DisableClock\n - * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n - * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART7EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART8EN LL_APB1_GRP1_DisableClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1ENR, Periphs); -} - -/** - * @brief Force APB1 peripherals reset. - * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART7RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART8RST LL_APB1_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->APB1RSTR, Periphs); -} - -/** - * @brief Release APB1 peripherals reset. - * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART7RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART8RST LL_APB1_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1RSTR, Periphs); -} - -/** - * @brief Enable APB1 peripheral clocks in low-power mode - * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM12LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM13LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM14LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CECLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART7LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART8LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB1LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB1LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable APB1 peripheral clocks in low-power mode - * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM12LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM13LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM14LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CECLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART7LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART8LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1LPENR, Periphs); -} - -/** - * @} - */ - -/** @defgroup BUS_LL_EF_APB2 APB2 - * @{ - */ - -/** - * @brief Enable APB2 peripherals clock. - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n - * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n - * APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n - * APB2ENR UART10EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_EnableClock\n - * APB2ENR DSIEN LL_APB2_GRP1_EnableClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB2ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if APB2 peripheral clock is enabled or not - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR UART10EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DSIEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs); -} - -/** - * @brief Disable APB2 peripherals clock. - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n - * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n - * APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n - * APB2ENR UART10EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_DisableClock\n - * APB2ENR DSIEN LL_APB2_GRP1_DisableClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2ENR, Periphs); -} - -/** - * @brief Force APB2 peripherals reset. - * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR UART9RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR UART10RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SDIORST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI6RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR LTDCRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DSIRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DFSDM2RST LL_APB2_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_ALL - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->APB2RSTR, Periphs); -} - -/** - * @brief Release APB2 peripherals reset. - * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR UART9RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR UART10RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SDIORST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI6RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR LTDCRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DSIRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DFSDM2RST LL_APB2_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_ALL - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2RSTR, Periphs); -} - -/** - * @brief Enable APB2 peripheral clocks in low-power mode - * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR UART9LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR UART10LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC2LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC3LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SDIOLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR EXTITLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI6LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR LTDCLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB2LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable APB2 peripheral clocks in low-power mode - * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR UART9LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR UART10LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC2LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC3LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SDIOLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR EXTITLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI6LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR LTDCLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2LPENR, Periphs); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RCC) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_BUS_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h deleted file mode 100644 index d478e13..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h +++ /dev/null @@ -1,637 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_cortex.h - * @author MCD Application Team - * @brief Header file of CORTEX LL module. - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LL CORTEX driver contains a set of generic APIs that can be - used by user: - (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick - functions - (+) Low power mode configuration (SCB register of Cortex-MCU) - (+) MPU API to configure and enable regions - (MPU services provided only on some devices) - (+) API to access to MCU info (CPUID register) - (+) API to enable fault handler (SHCSR accesses) - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_CORTEX_H -#define __STM32F4xx_LL_CORTEX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -/** @defgroup CORTEX_LL CORTEX - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants - * @{ - */ - -/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source - * @{ - */ -#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/ -#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type - * @{ - */ -#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */ -#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */ -#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */ -/** - * @} - */ - -#if __MPU_PRESENT - -/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control - * @{ - */ -#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */ -#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ -#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ -#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_REGION MPU Region Number - * @{ - */ -#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */ -#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */ -#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */ -#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */ -#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */ -#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */ -#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */ -#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size - * @{ - */ -#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges - * @{ - */ -#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/ -#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ -#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ -#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ -#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ -#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level - * @{ - */ -#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ -#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ -#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ -#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access - * @{ - */ -#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */ -#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access - * @{ - */ -#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ -#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access - * @{ - */ -#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ -#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access - * @{ - */ -#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ -#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */ -/** - * @} - */ -#endif /* __MPU_PRESENT */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions - * @{ - */ - -/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK - * @{ - */ - -/** - * @brief This function checks if the Systick counter flag is active or not. - * @note It can be used in timeout function on application side. - * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) -{ - return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)); -} - -/** - * @brief Configures the SysTick clock source - * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 - * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK - * @retval None - */ -__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) -{ - if (Source == LL_SYSTICK_CLKSOURCE_HCLK) - { - SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); - } - else - { - CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); - } -} - -/** - * @brief Get the SysTick clock source - * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 - * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK - */ -__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) -{ - return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); -} - -/** - * @brief Enable SysTick exception request - * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT - * @retval None - */ -__STATIC_INLINE void LL_SYSTICK_EnableIT(void) -{ - SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); -} - -/** - * @brief Disable SysTick exception request - * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT - * @retval None - */ -__STATIC_INLINE void LL_SYSTICK_DisableIT(void) -{ - CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); -} - -/** - * @brief Checks if the SYSTICK interrupt is enabled or disabled. - * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) -{ - return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)); -} - -/** - * @} - */ - -/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE - * @{ - */ - -/** - * @brief Processor uses sleep as its low power mode - * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep - * @retval None - */ -__STATIC_INLINE void LL_LPM_EnableSleep(void) -{ - /* Clear SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - -/** - * @brief Processor uses deep sleep as its low power mode - * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep - * @retval None - */ -__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) -{ - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - -/** - * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. - * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an - * empty main application. - * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit - * @retval None - */ -__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) -{ - /* Set SLEEPONEXIT bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Do not sleep when returning to Thread mode. - * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit - * @retval None - */ -__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) -{ - /* Clear SLEEPONEXIT bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the - * processor. - * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend - * @retval None - */ -__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) -{ - /* Set SEVEONPEND bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are - * excluded - * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend - * @retval None - */ -__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) -{ - /* Clear SEVEONPEND bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @} - */ - -/** @defgroup CORTEX_LL_EF_HANDLER HANDLER - * @{ - */ - -/** - * @brief Enable a fault in System handler control register (SHCSR) - * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault - * @param Fault This parameter can be a combination of the following values: - * @arg @ref LL_HANDLER_FAULT_USG - * @arg @ref LL_HANDLER_FAULT_BUS - * @arg @ref LL_HANDLER_FAULT_MEM - * @retval None - */ -__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault) -{ - /* Enable the system handler fault */ - SET_BIT(SCB->SHCSR, Fault); -} - -/** - * @brief Disable a fault in System handler control register (SHCSR) - * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault - * @param Fault This parameter can be a combination of the following values: - * @arg @ref LL_HANDLER_FAULT_USG - * @arg @ref LL_HANDLER_FAULT_BUS - * @arg @ref LL_HANDLER_FAULT_MEM - * @retval None - */ -__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault) -{ - /* Disable the system handler fault */ - CLEAR_BIT(SCB->SHCSR, Fault); -} - -/** - * @} - */ - -/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO - * @{ - */ - -/** - * @brief Get Implementer code - * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer - * @retval Value should be equal to 0x41 for ARM - */ -__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); -} - -/** - * @brief Get Variant number (The r value in the rnpn product revision identifier) - * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant - * @retval Value between 0 and 255 (0x0: revision 0) - */ -__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); -} - -/** - * @brief Get Constant number - * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant - * @retval Value should be equal to 0xF for Cortex-M4 devices - */ -__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); -} - -/** - * @brief Get Part number - * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo - * @retval Value should be equal to 0xC24 for Cortex-M4 - */ -__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); -} - -/** - * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) - * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision - * @retval Value between 0 and 255 (0x1: patch 1) - */ -__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); -} - -/** - * @} - */ - -#if __MPU_PRESENT -/** @defgroup CORTEX_LL_EF_MPU MPU - * @{ - */ - -/** - * @brief Enable MPU with input options - * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable - * @param Options This parameter can be one of the following values: - * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE - * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI - * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT - * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF - * @retval None - */ -__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) -{ - /* Enable the MPU*/ - WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); - /* Ensure MPU settings take effects */ - __DSB(); - /* Sequence instruction fetches using update settings */ - __ISB(); -} - -/** - * @brief Disable MPU - * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable - * @retval None - */ -__STATIC_INLINE void LL_MPU_Disable(void) -{ - /* Make sure outstanding transfers are done */ - __DMB(); - /* Disable MPU*/ - WRITE_REG(MPU->CTRL, 0U); -} - -/** - * @brief Check if MPU is enabled or not - * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) -{ - return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)); -} - -/** - * @brief Enable a MPU region - * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion - * @param Region This parameter can be one of the following values: - * @arg @ref LL_MPU_REGION_NUMBER0 - * @arg @ref LL_MPU_REGION_NUMBER1 - * @arg @ref LL_MPU_REGION_NUMBER2 - * @arg @ref LL_MPU_REGION_NUMBER3 - * @arg @ref LL_MPU_REGION_NUMBER4 - * @arg @ref LL_MPU_REGION_NUMBER5 - * @arg @ref LL_MPU_REGION_NUMBER6 - * @arg @ref LL_MPU_REGION_NUMBER7 - * @retval None - */ -__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) -{ - /* Set Region number */ - WRITE_REG(MPU->RNR, Region); - /* Enable the MPU region */ - SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); -} - -/** - * @brief Configure and enable a region - * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n - * MPU_RBAR REGION LL_MPU_ConfigRegion\n - * MPU_RBAR ADDR LL_MPU_ConfigRegion\n - * MPU_RASR XN LL_MPU_ConfigRegion\n - * MPU_RASR AP LL_MPU_ConfigRegion\n - * MPU_RASR S LL_MPU_ConfigRegion\n - * MPU_RASR C LL_MPU_ConfigRegion\n - * MPU_RASR B LL_MPU_ConfigRegion\n - * MPU_RASR SIZE LL_MPU_ConfigRegion - * @param Region This parameter can be one of the following values: - * @arg @ref LL_MPU_REGION_NUMBER0 - * @arg @ref LL_MPU_REGION_NUMBER1 - * @arg @ref LL_MPU_REGION_NUMBER2 - * @arg @ref LL_MPU_REGION_NUMBER3 - * @arg @ref LL_MPU_REGION_NUMBER4 - * @arg @ref LL_MPU_REGION_NUMBER5 - * @arg @ref LL_MPU_REGION_NUMBER6 - * @arg @ref LL_MPU_REGION_NUMBER7 - * @param Address Value of region base address - * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF - * @param Attributes This parameter can be a combination of the following values: - * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B - * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB - * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB - * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB - * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB - * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB - * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS - * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO - * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 - * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE - * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE - * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE - * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE - * @retval None - */ -__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) -{ - /* Set Region number */ - WRITE_REG(MPU->RNR, Region); - /* Set base address */ - WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); - /* Configure MPU */ - WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos)); -} - -/** - * @brief Disable a region - * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n - * MPU_RASR ENABLE LL_MPU_DisableRegion - * @param Region This parameter can be one of the following values: - * @arg @ref LL_MPU_REGION_NUMBER0 - * @arg @ref LL_MPU_REGION_NUMBER1 - * @arg @ref LL_MPU_REGION_NUMBER2 - * @arg @ref LL_MPU_REGION_NUMBER3 - * @arg @ref LL_MPU_REGION_NUMBER4 - * @arg @ref LL_MPU_REGION_NUMBER5 - * @arg @ref LL_MPU_REGION_NUMBER6 - * @arg @ref LL_MPU_REGION_NUMBER7 - * @retval None - */ -__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) -{ - /* Set Region number */ - WRITE_REG(MPU->RNR, Region); - /* Disable the MPU region */ - CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); -} - -/** - * @} - */ - -#endif /* __MPU_PRESENT */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_CORTEX_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h deleted file mode 100644 index 76444fc..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h +++ /dev/null @@ -1,2868 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_dma.h - * @author MCD Application Team - * @brief Header file of DMA LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_DMA_H -#define __STM32F4xx_LL_DMA_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (DMA1) || defined (DMA2) - -/** @defgroup DMA_LL DMA - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup DMA_LL_Private_Variables DMA Private Variables - * @{ - */ -/* Array used to get the DMA stream register offset versus stream index LL_DMA_STREAM_x */ -static const uint8_t STREAM_OFFSET_TAB[] = -{ - (uint8_t)(DMA1_Stream0_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream1_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream2_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream3_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream4_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream5_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream6_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream7_BASE - DMA1_BASE) -}; - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DMA_LL_Private_Constants DMA Private Constants - * @{ - */ -/** - * @} - */ - - -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure - * @{ - */ -typedef struct -{ - uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer - or as Source base address in case of memory to memory transfer direction. - - This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ - - uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer - or as Destination base address in case of memory to memory transfer direction. - - This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_LL_EC_DIRECTION - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ - - uint32_t Mode; /*!< Specifies the normal or circular operation mode. - This parameter can be a value of @ref DMA_LL_EC_MODE - @note The circular buffer mode cannot be used if the memory to memory - data transfer direction is configured on the selected Stream - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ - - uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction - is incremented or not. - This parameter can be a value of @ref DMA_LL_EC_PERIPH - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ - - uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction - is incremented or not. - This parameter can be a value of @ref DMA_LL_EC_MEMORY - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ - - uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) - in case of memory to memory transfer direction. - This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ - - uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) - in case of memory to memory transfer direction. - This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ - - uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. - The data unit is equal to the source buffer configuration set in PeripheralSize - or MemorySize parameters depending in the transfer direction. - This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ - - uint32_t Channel; /*!< Specifies the peripheral channel. - This parameter can be a value of @ref DMA_LL_EC_CHANNEL - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelSelection(). */ - - uint32_t Priority; /*!< Specifies the channel priority level. - This parameter can be a value of @ref DMA_LL_EC_PRIORITY - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetStreamPriorityLevel(). */ - - uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. - This parameter can be a value of @ref DMA_LL_FIFOMODE - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected stream - - This feature can be modified afterwards using unitary functions @ref LL_DMA_EnableFifoMode() or @ref LL_DMA_EnableFifoMode() . */ - - uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_LL_EC_FIFOTHRESHOLD - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetFIFOThreshold(). */ - - uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_LL_EC_MBURST - @note The burst mode is possible only if the address Increment mode is enabled. - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryBurstxfer(). */ - - uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_LL_EC_PBURST - @note The burst mode is possible only if the address Increment mode is enabled. - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphBurstxfer(). */ - -} LL_DMA_InitTypeDef; -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants - * @{ - */ - -/** @defgroup DMA_LL_EC_STREAM STREAM - * @{ - */ -#define LL_DMA_STREAM_0 0x00000000U -#define LL_DMA_STREAM_1 0x00000001U -#define LL_DMA_STREAM_2 0x00000002U -#define LL_DMA_STREAM_3 0x00000003U -#define LL_DMA_STREAM_4 0x00000004U -#define LL_DMA_STREAM_5 0x00000005U -#define LL_DMA_STREAM_6 0x00000006U -#define LL_DMA_STREAM_7 0x00000007U -#define LL_DMA_STREAM_ALL 0xFFFF0000U -/** - * @} - */ - -/** @defgroup DMA_LL_EC_DIRECTION DIRECTION - * @{ - */ -#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ -#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */ -#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MODE MODE - * @{ - */ -#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ -#define LL_DMA_MODE_CIRCULAR DMA_SxCR_CIRC /*!< Circular Mode */ -#define LL_DMA_MODE_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_DOUBLEBUFFER_MODE DOUBLEBUFFER MODE - * @{ - */ -#define LL_DMA_DOUBLEBUFFER_MODE_DISABLE 0x00000000U /*!< Disable double buffering mode */ -#define LL_DMA_DOUBLEBUFFER_MODE_ENABLE DMA_SxCR_DBM /*!< Enable double buffering mode */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PERIPH PERIPH - * @{ - */ -#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ -#define LL_DMA_PERIPH_INCREMENT DMA_SxCR_PINC /*!< Peripheral increment mode Enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MEMORY MEMORY - * @{ - */ -#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ -#define LL_DMA_MEMORY_INCREMENT DMA_SxCR_MINC /*!< Memory increment mode Enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN - * @{ - */ -#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ -#define LL_DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ -#define LL_DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment : Word */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN - * @{ - */ -#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ -#define LL_DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ -#define LL_DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment : Word */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_OFFSETSIZE OFFSETSIZE - * @{ - */ -#define LL_DMA_OFFSETSIZE_PSIZE 0x00000000U /*!< Peripheral increment offset size is linked to the PSIZE */ -#define LL_DMA_OFFSETSIZE_FIXEDTO4 DMA_SxCR_PINCOS /*!< Peripheral increment offset size is fixed to 4 (32-bit alignment) */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PRIORITY PRIORITY - * @{ - */ -#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ -#define LL_DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level : Medium */ -#define LL_DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level : High */ -#define LL_DMA_PRIORITY_VERYHIGH DMA_SxCR_PL /*!< Priority level : Very_High */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_CHANNEL CHANNEL - * @{ - */ -#define LL_DMA_CHANNEL_0 0x00000000U /* Select Channel0 of DMA Instance */ -#define LL_DMA_CHANNEL_1 DMA_SxCR_CHSEL_0 /* Select Channel1 of DMA Instance */ -#define LL_DMA_CHANNEL_2 DMA_SxCR_CHSEL_1 /* Select Channel2 of DMA Instance */ -#define LL_DMA_CHANNEL_3 (DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1) /* Select Channel3 of DMA Instance */ -#define LL_DMA_CHANNEL_4 DMA_SxCR_CHSEL_2 /* Select Channel4 of DMA Instance */ -#define LL_DMA_CHANNEL_5 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel5 of DMA Instance */ -#define LL_DMA_CHANNEL_6 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel6 of DMA Instance */ -#define LL_DMA_CHANNEL_7 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel7 of DMA Instance */ -#if defined (DMA_SxCR_CHSEL_3) -#define LL_DMA_CHANNEL_8 DMA_SxCR_CHSEL_3 /* Select Channel8 of DMA Instance */ -#define LL_DMA_CHANNEL_9 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_0) /* Select Channel9 of DMA Instance */ -#define LL_DMA_CHANNEL_10 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1) /* Select Channel10 of DMA Instance */ -#define LL_DMA_CHANNEL_11 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel11 of DMA Instance */ -#define LL_DMA_CHANNEL_12 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2) /* Select Channel12 of DMA Instance */ -#define LL_DMA_CHANNEL_13 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel13 of DMA Instance */ -#define LL_DMA_CHANNEL_14 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel14 of DMA Instance */ -#define LL_DMA_CHANNEL_15 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel15 of DMA Instance */ -#endif /* DMA_SxCR_CHSEL_3 */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MBURST MBURST - * @{ - */ -#define LL_DMA_MBURST_SINGLE 0x00000000U /*!< Memory burst single transfer configuration */ -#define LL_DMA_MBURST_INC4 DMA_SxCR_MBURST_0 /*!< Memory burst of 4 beats transfer configuration */ -#define LL_DMA_MBURST_INC8 DMA_SxCR_MBURST_1 /*!< Memory burst of 8 beats transfer configuration */ -#define LL_DMA_MBURST_INC16 (DMA_SxCR_MBURST_0 | DMA_SxCR_MBURST_1) /*!< Memory burst of 16 beats transfer configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PBURST PBURST - * @{ - */ -#define LL_DMA_PBURST_SINGLE 0x00000000U /*!< Peripheral burst single transfer configuration */ -#define LL_DMA_PBURST_INC4 DMA_SxCR_PBURST_0 /*!< Peripheral burst of 4 beats transfer configuration */ -#define LL_DMA_PBURST_INC8 DMA_SxCR_PBURST_1 /*!< Peripheral burst of 8 beats transfer configuration */ -#define LL_DMA_PBURST_INC16 (DMA_SxCR_PBURST_0 | DMA_SxCR_PBURST_1) /*!< Peripheral burst of 16 beats transfer configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_FIFOMODE DMA_LL_FIFOMODE - * @{ - */ -#define LL_DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable (direct mode is enabled) */ -#define LL_DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_FIFOSTATUS_0 FIFOSTATUS 0 - * @{ - */ -#define LL_DMA_FIFOSTATUS_0_25 0x00000000U /*!< 0 < fifo_level < 1/4 */ -#define LL_DMA_FIFOSTATUS_25_50 DMA_SxFCR_FS_0 /*!< 1/4 < fifo_level < 1/2 */ -#define LL_DMA_FIFOSTATUS_50_75 DMA_SxFCR_FS_1 /*!< 1/2 < fifo_level < 3/4 */ -#define LL_DMA_FIFOSTATUS_75_100 (DMA_SxFCR_FS_1 | DMA_SxFCR_FS_0) /*!< 3/4 < fifo_level < full */ -#define LL_DMA_FIFOSTATUS_EMPTY DMA_SxFCR_FS_2 /*!< FIFO is empty */ -#define LL_DMA_FIFOSTATUS_FULL (DMA_SxFCR_FS_2 | DMA_SxFCR_FS_0) /*!< FIFO is full */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_FIFOTHRESHOLD FIFOTHRESHOLD - * @{ - */ -#define LL_DMA_FIFOTHRESHOLD_1_4 0x00000000U /*!< FIFO threshold 1 quart full configuration */ -#define LL_DMA_FIFOTHRESHOLD_1_2 DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */ -#define LL_DMA_FIFOTHRESHOLD_3_4 DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */ -#define LL_DMA_FIFOTHRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_CURRENTTARGETMEM CURRENTTARGETMEM - * @{ - */ -#define LL_DMA_CURRENTTARGETMEM0 0x00000000U /*!< Set CurrentTarget Memory to Memory 0 */ -#define LL_DMA_CURRENTTARGETMEM1 DMA_SxCR_CT /*!< Set CurrentTarget Memory to Memory 1 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros - * @{ - */ - -/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros - * @{ - */ -/** - * @brief Write a value in DMA register - * @param __INSTANCE__ DMA Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in DMA register - * @param __INSTANCE__ DMA Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxStreamy - * @{ - */ -/** - * @brief Convert DMAx_Streamy into DMAx - * @param __STREAM_INSTANCE__ DMAx_Streamy - * @retval DMAx - */ -#define __LL_DMA_GET_INSTANCE(__STREAM_INSTANCE__) \ -(((uint32_t)(__STREAM_INSTANCE__) > ((uint32_t)DMA1_Stream7)) ? DMA2 : DMA1) - -/** - * @brief Convert DMAx_Streamy into LL_DMA_STREAM_y - * @param __STREAM_INSTANCE__ DMAx_Streamy - * @retval LL_DMA_CHANNEL_y - */ -#define __LL_DMA_GET_STREAM(__STREAM_INSTANCE__) \ -(((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream0)) ? LL_DMA_STREAM_0 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream0)) ? LL_DMA_STREAM_0 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream1)) ? LL_DMA_STREAM_1 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream1)) ? LL_DMA_STREAM_1 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream2)) ? LL_DMA_STREAM_2 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream2)) ? LL_DMA_STREAM_2 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream3)) ? LL_DMA_STREAM_3 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream3)) ? LL_DMA_STREAM_3 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream4)) ? LL_DMA_STREAM_4 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream4)) ? LL_DMA_STREAM_4 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream5)) ? LL_DMA_STREAM_5 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream5)) ? LL_DMA_STREAM_5 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream6)) ? LL_DMA_STREAM_6 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream6)) ? LL_DMA_STREAM_6 : \ - LL_DMA_STREAM_7) - -/** - * @brief Convert DMA Instance DMAx and LL_DMA_STREAM_y into DMAx_Streamy - * @param __DMA_INSTANCE__ DMAx - * @param __STREAM__ LL_DMA_STREAM_y - * @retval DMAx_Streamy - */ -#define __LL_DMA_GET_STREAM_INSTANCE(__DMA_INSTANCE__, __STREAM__) \ -((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA1_Stream0 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA2_Stream0 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA1_Stream1 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA2_Stream1 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA1_Stream2 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA2_Stream2 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA1_Stream3 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA2_Stream3 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA1_Stream4 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA2_Stream4 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA1_Stream5 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA2_Stream5 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA1_Stream6 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA2_Stream6 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_7))) ? DMA1_Stream7 : \ - DMA2_Stream7) - -/** - * @} - */ - -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ - /** @defgroup DMA_LL_Exported_Functions DMA Exported Functions - * @{ - */ - -/** @defgroup DMA_LL_EF_Configuration Configuration - * @{ - */ -/** - * @brief Enable DMA stream. - * @rmtoll CR EN LL_DMA_EnableStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); -} - -/** - * @brief Disable DMA stream. - * @rmtoll CR EN LL_DMA_DisableStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); -} - -/** - * @brief Check if DMA stream is enabled or disabled. - * @rmtoll CR EN LL_DMA_IsEnabledStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN) == (DMA_SxCR_EN)); -} - -/** - * @brief Configure all parameters linked to DMA transfer. - * @rmtoll CR DIR LL_DMA_ConfigTransfer\n - * CR CIRC LL_DMA_ConfigTransfer\n - * CR PINC LL_DMA_ConfigTransfer\n - * CR MINC LL_DMA_ConfigTransfer\n - * CR PSIZE LL_DMA_ConfigTransfer\n - * CR MSIZE LL_DMA_ConfigTransfer\n - * CR PL LL_DMA_ConfigTransfer\n - * CR PFCTRL LL_DMA_ConfigTransfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Configuration This parameter must be a combination of all the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR or @ref LL_DMA_MODE_PFCTRL - * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD - * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD - * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH - *@retval None - */ -__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Configuration) -{ - MODIFY_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, - DMA_SxCR_DIR | DMA_SxCR_CIRC | DMA_SxCR_PINC | DMA_SxCR_MINC | DMA_SxCR_PSIZE | DMA_SxCR_MSIZE | DMA_SxCR_PL | DMA_SxCR_PFCTRL, - Configuration); -} - -/** - * @brief Set Data transfer direction (read from peripheral or from memory). - * @rmtoll CR DIR LL_DMA_SetDataTransferDirection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Direction This parameter can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Direction) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR, Direction); -} - -/** - * @brief Get Data transfer direction (read from peripheral or from memory). - * @rmtoll CR DIR LL_DMA_GetDataTransferDirection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - */ -__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR)); -} - -/** - * @brief Set DMA mode normal, circular or peripheral flow control. - * @rmtoll CR CIRC LL_DMA_SetMode\n - * CR PFCTRL LL_DMA_SetMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Mode This parameter can be one of the following values: - * @arg @ref LL_DMA_MODE_NORMAL - * @arg @ref LL_DMA_MODE_CIRCULAR - * @arg @ref LL_DMA_MODE_PFCTRL - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL, Mode); -} - -/** - * @brief Get DMA mode normal, circular or peripheral flow control. - * @rmtoll CR CIRC LL_DMA_GetMode\n - * CR PFCTRL LL_DMA_GetMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MODE_NORMAL - * @arg @ref LL_DMA_MODE_CIRCULAR - * @arg @ref LL_DMA_MODE_PFCTRL - */ -__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL)); -} - -/** - * @brief Set Peripheral increment mode. - * @rmtoll CR PINC LL_DMA_SetPeriphIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param IncrementMode This parameter can be one of the following values: - * @arg @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_PERIPH_INCREMENT - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC, IncrementMode); -} - -/** - * @brief Get Peripheral increment mode. - * @rmtoll CR PINC LL_DMA_GetPeriphIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_PERIPH_INCREMENT - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC)); -} - -/** - * @brief Set Memory increment mode. - * @rmtoll CR MINC LL_DMA_SetMemoryIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param IncrementMode This parameter can be one of the following values: - * @arg @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC, IncrementMode); -} - -/** - * @brief Get Memory increment mode. - * @rmtoll CR MINC LL_DMA_GetMemoryIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC)); -} - -/** - * @brief Set Peripheral size. - * @rmtoll CR PSIZE LL_DMA_SetPeriphSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Size This parameter can be one of the following values: - * @arg @ref LL_DMA_PDATAALIGN_BYTE - * @arg @ref LL_DMA_PDATAALIGN_HALFWORD - * @arg @ref LL_DMA_PDATAALIGN_WORD - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE, Size); -} - -/** - * @brief Get Peripheral size. - * @rmtoll CR PSIZE LL_DMA_GetPeriphSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PDATAALIGN_BYTE - * @arg @ref LL_DMA_PDATAALIGN_HALFWORD - * @arg @ref LL_DMA_PDATAALIGN_WORD - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE)); -} - -/** - * @brief Set Memory size. - * @rmtoll CR MSIZE LL_DMA_SetMemorySize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Size This parameter can be one of the following values: - * @arg @ref LL_DMA_MDATAALIGN_BYTE - * @arg @ref LL_DMA_MDATAALIGN_HALFWORD - * @arg @ref LL_DMA_MDATAALIGN_WORD - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE, Size); -} - -/** - * @brief Get Memory size. - * @rmtoll CR MSIZE LL_DMA_GetMemorySize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MDATAALIGN_BYTE - * @arg @ref LL_DMA_MDATAALIGN_HALFWORD - * @arg @ref LL_DMA_MDATAALIGN_WORD - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE)); -} - -/** - * @brief Set Peripheral increment offset size. - * @rmtoll CR PINCOS LL_DMA_SetIncOffsetSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param OffsetSize This parameter can be one of the following values: - * @arg @ref LL_DMA_OFFSETSIZE_PSIZE - * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t OffsetSize) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS, OffsetSize); -} - -/** - * @brief Get Peripheral increment offset size. - * @rmtoll CR PINCOS LL_DMA_GetIncOffsetSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_OFFSETSIZE_PSIZE - * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 - */ -__STATIC_INLINE uint32_t LL_DMA_GetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS)); -} - -/** - * @brief Set Stream priority level. - * @rmtoll CR PL LL_DMA_SetStreamPriorityLevel - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Priority This parameter can be one of the following values: - * @arg @ref LL_DMA_PRIORITY_LOW - * @arg @ref LL_DMA_PRIORITY_MEDIUM - * @arg @ref LL_DMA_PRIORITY_HIGH - * @arg @ref LL_DMA_PRIORITY_VERYHIGH - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Priority) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL, Priority); -} - -/** - * @brief Get Stream priority level. - * @rmtoll CR PL LL_DMA_GetStreamPriorityLevel - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PRIORITY_LOW - * @arg @ref LL_DMA_PRIORITY_MEDIUM - * @arg @ref LL_DMA_PRIORITY_HIGH - * @arg @ref LL_DMA_PRIORITY_VERYHIGH - */ -__STATIC_INLINE uint32_t LL_DMA_GetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL)); -} - -/** - * @brief Set Number of data to transfer. - * @rmtoll NDTR NDT LL_DMA_SetDataLength - * @note This action has no effect if - * stream is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param NbData Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t NbData) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT, NbData); -} - -/** - * @brief Get Number of data to transfer. - * @rmtoll NDTR NDT LL_DMA_GetDataLength - * @note Once the stream is enabled, the return value indicate the - * remaining bytes to be transmitted. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT)); -} - -/** - * @brief Select Channel number associated to the Stream. - * @rmtoll CR CHSEL LL_DMA_SetChannelSelection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_DMA_CHANNEL_0 - * @arg @ref LL_DMA_CHANNEL_1 - * @arg @ref LL_DMA_CHANNEL_2 - * @arg @ref LL_DMA_CHANNEL_3 - * @arg @ref LL_DMA_CHANNEL_4 - * @arg @ref LL_DMA_CHANNEL_5 - * @arg @ref LL_DMA_CHANNEL_6 - * @arg @ref LL_DMA_CHANNEL_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Channel) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL, Channel); -} - -/** - * @brief Get the Channel number associated to the Stream. - * @rmtoll CR CHSEL LL_DMA_GetChannelSelection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_CHANNEL_0 - * @arg @ref LL_DMA_CHANNEL_1 - * @arg @ref LL_DMA_CHANNEL_2 - * @arg @ref LL_DMA_CHANNEL_3 - * @arg @ref LL_DMA_CHANNEL_4 - * @arg @ref LL_DMA_CHANNEL_5 - * @arg @ref LL_DMA_CHANNEL_6 - * @arg @ref LL_DMA_CHANNEL_7 - */ -__STATIC_INLINE uint32_t LL_DMA_GetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL)); -} - -/** - * @brief Set Memory burst transfer configuration. - * @rmtoll CR MBURST LL_DMA_SetMemoryBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Mburst This parameter can be one of the following values: - * @arg @ref LL_DMA_MBURST_SINGLE - * @arg @ref LL_DMA_MBURST_INC4 - * @arg @ref LL_DMA_MBURST_INC8 - * @arg @ref LL_DMA_MBURST_INC16 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mburst) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST, Mburst); -} - -/** - * @brief Get Memory burst transfer configuration. - * @rmtoll CR MBURST LL_DMA_GetMemoryBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MBURST_SINGLE - * @arg @ref LL_DMA_MBURST_INC4 - * @arg @ref LL_DMA_MBURST_INC8 - * @arg @ref LL_DMA_MBURST_INC16 - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST)); -} - -/** - * @brief Set Peripheral burst transfer configuration. - * @rmtoll CR PBURST LL_DMA_SetPeriphBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Pburst This parameter can be one of the following values: - * @arg @ref LL_DMA_PBURST_SINGLE - * @arg @ref LL_DMA_PBURST_INC4 - * @arg @ref LL_DMA_PBURST_INC8 - * @arg @ref LL_DMA_PBURST_INC16 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Pburst) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST, Pburst); -} - -/** - * @brief Get Peripheral burst transfer configuration. - * @rmtoll CR PBURST LL_DMA_GetPeriphBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PBURST_SINGLE - * @arg @ref LL_DMA_PBURST_INC4 - * @arg @ref LL_DMA_PBURST_INC8 - * @arg @ref LL_DMA_PBURST_INC16 - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST)); -} - -/** - * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. - * @rmtoll CR CT LL_DMA_SetCurrentTargetMem - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param CurrentMemory This parameter can be one of the following values: - * @arg @ref LL_DMA_CURRENTTARGETMEM0 - * @arg @ref LL_DMA_CURRENTTARGETMEM1 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t CurrentMemory) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT, CurrentMemory); -} - -/** - * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. - * @rmtoll CR CT LL_DMA_GetCurrentTargetMem - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_CURRENTTARGETMEM0 - * @arg @ref LL_DMA_CURRENTTARGETMEM1 - */ -__STATIC_INLINE uint32_t LL_DMA_GetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT)); -} - -/** - * @brief Enable the double buffer mode. - * @rmtoll CR DBM LL_DMA_EnableDoubleBufferMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); -} - -/** - * @brief Disable the double buffer mode. - * @rmtoll CR DBM LL_DMA_DisableDoubleBufferMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); -} - -/** - * @brief Get FIFO status. - * @rmtoll FCR FS LL_DMA_GetFIFOStatus - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_FIFOSTATUS_0_25 - * @arg @ref LL_DMA_FIFOSTATUS_25_50 - * @arg @ref LL_DMA_FIFOSTATUS_50_75 - * @arg @ref LL_DMA_FIFOSTATUS_75_100 - * @arg @ref LL_DMA_FIFOSTATUS_EMPTY - * @arg @ref LL_DMA_FIFOSTATUS_FULL - */ -__STATIC_INLINE uint32_t LL_DMA_GetFIFOStatus(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FS)); -} - -/** - * @brief Disable Fifo mode. - * @rmtoll FCR DMDIS LL_DMA_DisableFifoMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); -} - -/** - * @brief Enable Fifo mode. - * @rmtoll FCR DMDIS LL_DMA_EnableFifoMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); -} - -/** - * @brief Select FIFO threshold. - * @rmtoll FCR FTH LL_DMA_SetFIFOThreshold - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Threshold This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Threshold) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH, Threshold); -} - -/** - * @brief Get FIFO threshold. - * @rmtoll FCR FTH LL_DMA_GetFIFOThreshold - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - */ -__STATIC_INLINE uint32_t LL_DMA_GetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH)); -} - -/** - * @brief Configure the FIFO . - * @rmtoll FCR FTH LL_DMA_ConfigFifo\n - * FCR DMDIS LL_DMA_ConfigFifo - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param FifoMode This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOMODE_ENABLE - * @arg @ref LL_DMA_FIFOMODE_DISABLE - * @param FifoThreshold This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - * @retval None - */ -__STATIC_INLINE void LL_DMA_ConfigFifo(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t FifoMode, uint32_t FifoThreshold) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH|DMA_SxFCR_DMDIS, FifoMode|FifoThreshold); -} - -/** - * @brief Configure the Source and Destination addresses. - * @note This API must not be called when the DMA stream is enabled. - * @rmtoll M0AR M0A LL_DMA_ConfigAddresses\n - * PAR PA LL_DMA_ConfigAddresses - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param SrcAddress Between 0 to 0xFFFFFFFF - * @param DstAddress Between 0 to 0xFFFFFFFF - * @param Direction This parameter can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @retval None - */ -__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction) -{ - /* Direction Memory to Periph */ - if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, SrcAddress); - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, DstAddress); - } - /* Direction Periph to Memory and Memory to Memory */ - else - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, SrcAddress); - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, DstAddress); - } -} - -/** - * @brief Set the Memory address. - * @rmtoll M0AR M0A LL_DMA_SetMemoryAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); -} - -/** - * @brief Set the Peripheral address. - * @rmtoll PAR PA LL_DMA_SetPeriphAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param PeriphAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t PeriphAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, PeriphAddress); -} - -/** - * @brief Get the Memory address. - * @rmtoll M0AR M0A LL_DMA_GetMemoryAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); -} - -/** - * @brief Get the Peripheral address. - * @rmtoll PAR PA LL_DMA_GetPeriphAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); -} - -/** - * @brief Set the Memory to Memory Source address. - * @rmtoll PAR PA LL_DMA_SetM2MSrcAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, MemoryAddress); -} - -/** - * @brief Set the Memory to Memory Destination address. - * @rmtoll M0AR M0A LL_DMA_SetM2MDstAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); - } - -/** - * @brief Get the Memory to Memory Source address. - * @rmtoll PAR PA LL_DMA_GetM2MSrcAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream) - { - return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); - } - -/** - * @brief Get the Memory to Memory Destination address. - * @rmtoll M0AR M0A LL_DMA_GetM2MDstAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); -} - -/** - * @brief Set Memory 1 address (used in case of Double buffer mode). - * @rmtoll M1AR M1A LL_DMA_SetMemory1Address - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Address Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Address) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR, DMA_SxM1AR_M1A, Address); -} - -/** - * @brief Get Memory 1 address (used in case of Double buffer mode). - * @rmtoll M1AR M1A LL_DMA_GetMemory1Address - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR); -} - -/** - * @} - */ - -/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management - * @{ - */ - -/** - * @brief Get Stream 0 half transfer flag. - * @rmtoll LISR HTIF0 LL_DMA_IsActiveFlag_HT0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF0)==(DMA_LISR_HTIF0)); -} - -/** - * @brief Get Stream 1 half transfer flag. - * @rmtoll LISR HTIF1 LL_DMA_IsActiveFlag_HT1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF1)==(DMA_LISR_HTIF1)); -} - -/** - * @brief Get Stream 2 half transfer flag. - * @rmtoll LISR HTIF2 LL_DMA_IsActiveFlag_HT2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF2)==(DMA_LISR_HTIF2)); -} - -/** - * @brief Get Stream 3 half transfer flag. - * @rmtoll LISR HTIF3 LL_DMA_IsActiveFlag_HT3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF3)==(DMA_LISR_HTIF3)); -} - -/** - * @brief Get Stream 4 half transfer flag. - * @rmtoll HISR HTIF4 LL_DMA_IsActiveFlag_HT4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF4)==(DMA_HISR_HTIF4)); -} - -/** - * @brief Get Stream 5 half transfer flag. - * @rmtoll HISR HTIF0 LL_DMA_IsActiveFlag_HT5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF5)==(DMA_HISR_HTIF5)); -} - -/** - * @brief Get Stream 6 half transfer flag. - * @rmtoll HISR HTIF6 LL_DMA_IsActiveFlag_HT6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF6)==(DMA_HISR_HTIF6)); -} - -/** - * @brief Get Stream 7 half transfer flag. - * @rmtoll HISR HTIF7 LL_DMA_IsActiveFlag_HT7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF7)==(DMA_HISR_HTIF7)); -} - -/** - * @brief Get Stream 0 transfer complete flag. - * @rmtoll LISR TCIF0 LL_DMA_IsActiveFlag_TC0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF0)==(DMA_LISR_TCIF0)); -} - -/** - * @brief Get Stream 1 transfer complete flag. - * @rmtoll LISR TCIF1 LL_DMA_IsActiveFlag_TC1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF1)==(DMA_LISR_TCIF1)); -} - -/** - * @brief Get Stream 2 transfer complete flag. - * @rmtoll LISR TCIF2 LL_DMA_IsActiveFlag_TC2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF2)==(DMA_LISR_TCIF2)); -} - -/** - * @brief Get Stream 3 transfer complete flag. - * @rmtoll LISR TCIF3 LL_DMA_IsActiveFlag_TC3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF3)==(DMA_LISR_TCIF3)); -} - -/** - * @brief Get Stream 4 transfer complete flag. - * @rmtoll HISR TCIF4 LL_DMA_IsActiveFlag_TC4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF4)==(DMA_HISR_TCIF4)); -} - -/** - * @brief Get Stream 5 transfer complete flag. - * @rmtoll HISR TCIF0 LL_DMA_IsActiveFlag_TC5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF5)==(DMA_HISR_TCIF5)); -} - -/** - * @brief Get Stream 6 transfer complete flag. - * @rmtoll HISR TCIF6 LL_DMA_IsActiveFlag_TC6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF6)==(DMA_HISR_TCIF6)); -} - -/** - * @brief Get Stream 7 transfer complete flag. - * @rmtoll HISR TCIF7 LL_DMA_IsActiveFlag_TC7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF7)==(DMA_HISR_TCIF7)); -} - -/** - * @brief Get Stream 0 transfer error flag. - * @rmtoll LISR TEIF0 LL_DMA_IsActiveFlag_TE0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF0)==(DMA_LISR_TEIF0)); -} - -/** - * @brief Get Stream 1 transfer error flag. - * @rmtoll LISR TEIF1 LL_DMA_IsActiveFlag_TE1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF1)==(DMA_LISR_TEIF1)); -} - -/** - * @brief Get Stream 2 transfer error flag. - * @rmtoll LISR TEIF2 LL_DMA_IsActiveFlag_TE2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF2)==(DMA_LISR_TEIF2)); -} - -/** - * @brief Get Stream 3 transfer error flag. - * @rmtoll LISR TEIF3 LL_DMA_IsActiveFlag_TE3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF3)==(DMA_LISR_TEIF3)); -} - -/** - * @brief Get Stream 4 transfer error flag. - * @rmtoll HISR TEIF4 LL_DMA_IsActiveFlag_TE4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF4)==(DMA_HISR_TEIF4)); -} - -/** - * @brief Get Stream 5 transfer error flag. - * @rmtoll HISR TEIF0 LL_DMA_IsActiveFlag_TE5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF5)==(DMA_HISR_TEIF5)); -} - -/** - * @brief Get Stream 6 transfer error flag. - * @rmtoll HISR TEIF6 LL_DMA_IsActiveFlag_TE6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF6)==(DMA_HISR_TEIF6)); -} - -/** - * @brief Get Stream 7 transfer error flag. - * @rmtoll HISR TEIF7 LL_DMA_IsActiveFlag_TE7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF7)==(DMA_HISR_TEIF7)); -} - -/** - * @brief Get Stream 0 direct mode error flag. - * @rmtoll LISR DMEIF0 LL_DMA_IsActiveFlag_DME0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF0)==(DMA_LISR_DMEIF0)); -} - -/** - * @brief Get Stream 1 direct mode error flag. - * @rmtoll LISR DMEIF1 LL_DMA_IsActiveFlag_DME1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF1)==(DMA_LISR_DMEIF1)); -} - -/** - * @brief Get Stream 2 direct mode error flag. - * @rmtoll LISR DMEIF2 LL_DMA_IsActiveFlag_DME2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF2)==(DMA_LISR_DMEIF2)); -} - -/** - * @brief Get Stream 3 direct mode error flag. - * @rmtoll LISR DMEIF3 LL_DMA_IsActiveFlag_DME3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF3)==(DMA_LISR_DMEIF3)); -} - -/** - * @brief Get Stream 4 direct mode error flag. - * @rmtoll HISR DMEIF4 LL_DMA_IsActiveFlag_DME4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF4)==(DMA_HISR_DMEIF4)); -} - -/** - * @brief Get Stream 5 direct mode error flag. - * @rmtoll HISR DMEIF0 LL_DMA_IsActiveFlag_DME5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF5)==(DMA_HISR_DMEIF5)); -} - -/** - * @brief Get Stream 6 direct mode error flag. - * @rmtoll HISR DMEIF6 LL_DMA_IsActiveFlag_DME6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF6)==(DMA_HISR_DMEIF6)); -} - -/** - * @brief Get Stream 7 direct mode error flag. - * @rmtoll HISR DMEIF7 LL_DMA_IsActiveFlag_DME7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF7)==(DMA_HISR_DMEIF7)); -} - -/** - * @brief Get Stream 0 FIFO error flag. - * @rmtoll LISR FEIF0 LL_DMA_IsActiveFlag_FE0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF0)==(DMA_LISR_FEIF0)); -} - -/** - * @brief Get Stream 1 FIFO error flag. - * @rmtoll LISR FEIF1 LL_DMA_IsActiveFlag_FE1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF1)==(DMA_LISR_FEIF1)); -} - -/** - * @brief Get Stream 2 FIFO error flag. - * @rmtoll LISR FEIF2 LL_DMA_IsActiveFlag_FE2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF2)==(DMA_LISR_FEIF2)); -} - -/** - * @brief Get Stream 3 FIFO error flag. - * @rmtoll LISR FEIF3 LL_DMA_IsActiveFlag_FE3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF3)==(DMA_LISR_FEIF3)); -} - -/** - * @brief Get Stream 4 FIFO error flag. - * @rmtoll HISR FEIF4 LL_DMA_IsActiveFlag_FE4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF4)==(DMA_HISR_FEIF4)); -} - -/** - * @brief Get Stream 5 FIFO error flag. - * @rmtoll HISR FEIF0 LL_DMA_IsActiveFlag_FE5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF5)==(DMA_HISR_FEIF5)); -} - -/** - * @brief Get Stream 6 FIFO error flag. - * @rmtoll HISR FEIF6 LL_DMA_IsActiveFlag_FE6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF6)==(DMA_HISR_FEIF6)); -} - -/** - * @brief Get Stream 7 FIFO error flag. - * @rmtoll HISR FEIF7 LL_DMA_IsActiveFlag_FE7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF7)==(DMA_HISR_FEIF7)); -} - -/** - * @brief Clear Stream 0 half transfer flag. - * @rmtoll LIFCR CHTIF0 LL_DMA_ClearFlag_HT0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF0); -} - -/** - * @brief Clear Stream 1 half transfer flag. - * @rmtoll LIFCR CHTIF1 LL_DMA_ClearFlag_HT1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF1); -} - -/** - * @brief Clear Stream 2 half transfer flag. - * @rmtoll LIFCR CHTIF2 LL_DMA_ClearFlag_HT2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF2); -} - -/** - * @brief Clear Stream 3 half transfer flag. - * @rmtoll LIFCR CHTIF3 LL_DMA_ClearFlag_HT3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF3); -} - -/** - * @brief Clear Stream 4 half transfer flag. - * @rmtoll HIFCR CHTIF4 LL_DMA_ClearFlag_HT4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF4); -} - -/** - * @brief Clear Stream 5 half transfer flag. - * @rmtoll HIFCR CHTIF5 LL_DMA_ClearFlag_HT5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF5); -} - -/** - * @brief Clear Stream 6 half transfer flag. - * @rmtoll HIFCR CHTIF6 LL_DMA_ClearFlag_HT6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF6); -} - -/** - * @brief Clear Stream 7 half transfer flag. - * @rmtoll HIFCR CHTIF7 LL_DMA_ClearFlag_HT7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF7); -} - -/** - * @brief Clear Stream 0 transfer complete flag. - * @rmtoll LIFCR CTCIF0 LL_DMA_ClearFlag_TC0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF0); -} - -/** - * @brief Clear Stream 1 transfer complete flag. - * @rmtoll LIFCR CTCIF1 LL_DMA_ClearFlag_TC1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF1); -} - -/** - * @brief Clear Stream 2 transfer complete flag. - * @rmtoll LIFCR CTCIF2 LL_DMA_ClearFlag_TC2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF2); -} - -/** - * @brief Clear Stream 3 transfer complete flag. - * @rmtoll LIFCR CTCIF3 LL_DMA_ClearFlag_TC3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF3); -} - -/** - * @brief Clear Stream 4 transfer complete flag. - * @rmtoll HIFCR CTCIF4 LL_DMA_ClearFlag_TC4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF4); -} - -/** - * @brief Clear Stream 5 transfer complete flag. - * @rmtoll HIFCR CTCIF5 LL_DMA_ClearFlag_TC5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF5); -} - -/** - * @brief Clear Stream 6 transfer complete flag. - * @rmtoll HIFCR CTCIF6 LL_DMA_ClearFlag_TC6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF6); -} - -/** - * @brief Clear Stream 7 transfer complete flag. - * @rmtoll HIFCR CTCIF7 LL_DMA_ClearFlag_TC7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF7); -} - -/** - * @brief Clear Stream 0 transfer error flag. - * @rmtoll LIFCR CTEIF0 LL_DMA_ClearFlag_TE0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF0); -} - -/** - * @brief Clear Stream 1 transfer error flag. - * @rmtoll LIFCR CTEIF1 LL_DMA_ClearFlag_TE1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF1); -} - -/** - * @brief Clear Stream 2 transfer error flag. - * @rmtoll LIFCR CTEIF2 LL_DMA_ClearFlag_TE2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF2); -} - -/** - * @brief Clear Stream 3 transfer error flag. - * @rmtoll LIFCR CTEIF3 LL_DMA_ClearFlag_TE3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF3); -} - -/** - * @brief Clear Stream 4 transfer error flag. - * @rmtoll HIFCR CTEIF4 LL_DMA_ClearFlag_TE4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF4); -} - -/** - * @brief Clear Stream 5 transfer error flag. - * @rmtoll HIFCR CTEIF5 LL_DMA_ClearFlag_TE5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF5); -} - -/** - * @brief Clear Stream 6 transfer error flag. - * @rmtoll HIFCR CTEIF6 LL_DMA_ClearFlag_TE6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF6); -} - -/** - * @brief Clear Stream 7 transfer error flag. - * @rmtoll HIFCR CTEIF7 LL_DMA_ClearFlag_TE7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF7); -} - -/** - * @brief Clear Stream 0 direct mode error flag. - * @rmtoll LIFCR CDMEIF0 LL_DMA_ClearFlag_DME0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF0); -} - -/** - * @brief Clear Stream 1 direct mode error flag. - * @rmtoll LIFCR CDMEIF1 LL_DMA_ClearFlag_DME1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF1); -} - -/** - * @brief Clear Stream 2 direct mode error flag. - * @rmtoll LIFCR CDMEIF2 LL_DMA_ClearFlag_DME2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF2); -} - -/** - * @brief Clear Stream 3 direct mode error flag. - * @rmtoll LIFCR CDMEIF3 LL_DMA_ClearFlag_DME3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF3); -} - -/** - * @brief Clear Stream 4 direct mode error flag. - * @rmtoll HIFCR CDMEIF4 LL_DMA_ClearFlag_DME4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF4); -} - -/** - * @brief Clear Stream 5 direct mode error flag. - * @rmtoll HIFCR CDMEIF5 LL_DMA_ClearFlag_DME5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF5); -} - -/** - * @brief Clear Stream 6 direct mode error flag. - * @rmtoll HIFCR CDMEIF6 LL_DMA_ClearFlag_DME6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF6); -} - -/** - * @brief Clear Stream 7 direct mode error flag. - * @rmtoll HIFCR CDMEIF7 LL_DMA_ClearFlag_DME7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF7); -} - -/** - * @brief Clear Stream 0 FIFO error flag. - * @rmtoll LIFCR CFEIF0 LL_DMA_ClearFlag_FE0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF0); -} - -/** - * @brief Clear Stream 1 FIFO error flag. - * @rmtoll LIFCR CFEIF1 LL_DMA_ClearFlag_FE1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF1); -} - -/** - * @brief Clear Stream 2 FIFO error flag. - * @rmtoll LIFCR CFEIF2 LL_DMA_ClearFlag_FE2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF2); -} - -/** - * @brief Clear Stream 3 FIFO error flag. - * @rmtoll LIFCR CFEIF3 LL_DMA_ClearFlag_FE3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF3); -} - -/** - * @brief Clear Stream 4 FIFO error flag. - * @rmtoll HIFCR CFEIF4 LL_DMA_ClearFlag_FE4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF4); -} - -/** - * @brief Clear Stream 5 FIFO error flag. - * @rmtoll HIFCR CFEIF5 LL_DMA_ClearFlag_FE5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF5); -} - -/** - * @brief Clear Stream 6 FIFO error flag. - * @rmtoll HIFCR CFEIF6 LL_DMA_ClearFlag_FE6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF6); -} - -/** - * @brief Clear Stream 7 FIFO error flag. - * @rmtoll HIFCR CFEIF7 LL_DMA_ClearFlag_FE7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF7); -} - -/** - * @} - */ - -/** @defgroup DMA_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable Half transfer interrupt. - * @rmtoll CR HTIE LL_DMA_EnableIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); -} - -/** - * @brief Enable Transfer error interrupt. - * @rmtoll CR TEIE LL_DMA_EnableIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); -} - -/** - * @brief Enable Transfer complete interrupt. - * @rmtoll CR TCIE LL_DMA_EnableIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); -} - -/** - * @brief Enable Direct mode error interrupt. - * @rmtoll CR DMEIE LL_DMA_EnableIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); -} - -/** - * @brief Enable FIFO error interrupt. - * @rmtoll FCR FEIE LL_DMA_EnableIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); -} - -/** - * @brief Disable Half transfer interrupt. - * @rmtoll CR HTIE LL_DMA_DisableIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); -} - -/** - * @brief Disable Transfer error interrupt. - * @rmtoll CR TEIE LL_DMA_DisableIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); -} - -/** - * @brief Disable Transfer complete interrupt. - * @rmtoll CR TCIE LL_DMA_DisableIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); -} - -/** - * @brief Disable Direct mode error interrupt. - * @rmtoll CR DMEIE LL_DMA_DisableIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); -} - -/** - * @brief Disable FIFO error interrupt. - * @rmtoll FCR FEIE LL_DMA_DisableIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); -} - -/** - * @brief Check if Half transfer interrupt is enabled. - * @rmtoll CR HTIE LL_DMA_IsEnabledIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE) == DMA_SxCR_HTIE); -} - -/** - * @brief Check if Transfer error nterrup is enabled. - * @rmtoll CR TEIE LL_DMA_IsEnabledIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE) == DMA_SxCR_TEIE); -} - -/** - * @brief Check if Transfer complete interrupt is enabled. - * @rmtoll CR TCIE LL_DMA_IsEnabledIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE) == DMA_SxCR_TCIE); -} - -/** - * @brief Check if Direct mode error interrupt is enabled. - * @rmtoll CR DMEIE LL_DMA_IsEnabledIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE) == DMA_SxCR_DMEIE); -} - -/** - * @brief Check if FIFO error interrupt is enabled. - * @rmtoll FCR FEIE LL_DMA_IsEnabledIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE) == DMA_SxFCR_FEIE); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct); -uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream); -void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DMA1 || DMA2 */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_DMA_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h deleted file mode 100644 index 65ab691..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h +++ /dev/null @@ -1,954 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_exti.h - * @author MCD Application Team - * @brief Header file of EXTI LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS.Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_EXTI_H -#define __STM32F4xx_LL_EXTI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (EXTI) - -/** @defgroup EXTI_LL EXTI - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private Macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure - * @{ - */ -typedef struct -{ - - uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 - This parameter can be any combination of @ref EXTI_LL_EC_LINE */ - - FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. - This parameter can be set either to ENABLE or DISABLE */ - - uint8_t Mode; /*!< Specifies the mode for the EXTI lines. - This parameter can be a value of @ref EXTI_LL_EC_MODE. */ - - uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. - This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ -} LL_EXTI_InitTypeDef; - -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants - * @{ - */ - -/** @defgroup EXTI_LL_EC_LINE LINE - * @{ - */ -#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */ -#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */ -#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */ -#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */ -#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */ -#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */ -#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */ -#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */ -#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */ -#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */ -#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */ -#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */ -#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */ -#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */ -#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */ -#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */ -#if defined(EXTI_IMR_IM16) -#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */ -#endif -#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */ -#if defined(EXTI_IMR_IM18) -#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */ -#endif -#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */ -#if defined(EXTI_IMR_IM20) -#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */ -#endif -#if defined(EXTI_IMR_IM21) -#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */ -#endif -#if defined(EXTI_IMR_IM22) -#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */ -#endif -#if defined(EXTI_IMR_IM23) -#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */ -#endif -#if defined(EXTI_IMR_IM24) -#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */ -#endif -#if defined(EXTI_IMR_IM25) -#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */ -#endif -#if defined(EXTI_IMR_IM26) -#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */ -#endif -#if defined(EXTI_IMR_IM27) -#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */ -#endif -#if defined(EXTI_IMR_IM28) -#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */ -#endif -#if defined(EXTI_IMR_IM29) -#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */ -#endif -#if defined(EXTI_IMR_IM30) -#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */ -#endif -#if defined(EXTI_IMR_IM31) -#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */ -#endif -#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/ - - -#define LL_EXTI_LINE_ALL ((uint32_t)0xFFFFFFFFU) /*!< All Extended line */ - -#if defined(USE_FULL_LL_DRIVER) -#define LL_EXTI_LINE_NONE ((uint32_t)0x00000000U) /*!< None Extended line */ -#endif /*USE_FULL_LL_DRIVER*/ - -/** - * @} - */ -#if defined(USE_FULL_LL_DRIVER) - -/** @defgroup EXTI_LL_EC_MODE Mode - * @{ - */ -#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ -#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ -#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ -/** - * @} - */ - -/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger - * @{ - */ -#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ -#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ -#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ -#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ - -/** - * @} - */ - - -#endif /*USE_FULL_LL_DRIVER*/ - - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros - * @{ - */ - -/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in EXTI register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) - -/** - * @brief Read a value in EXTI register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) -/** - * @} - */ - - -/** - * @} - */ - - - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions - * @{ - */ -/** @defgroup EXTI_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 - * @note The reset value for the direct or internal lines (see RM) - * is set to 1 in order to enable the interrupt by default. - * Bits are set automatically at Power on. - * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->IMR, ExtiLine); -} - -/** - * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 - * @note The reset value for the direct or internal lines (see RM) - * is set to 1 in order to enable the interrupt by default. - * Bits are set automatically at Power on. - * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) -{ - CLEAR_BIT(EXTI->IMR, ExtiLine); -} - - -/** - * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 - * @note The reset value for the direct or internal lines (see RM) - * is set to 1 in order to enable the interrupt by default. - * Bits are set automatically at Power on. - * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine)); -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Event_Management Event_Management - * @{ - */ - -/** - * @brief Enable ExtiLine Event request for Lines in range 0 to 31 - * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->EMR, ExtiLine); - -} - - -/** - * @brief Disable ExtiLine Event request for Lines in range 0 to 31 - * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) -{ - CLEAR_BIT(EXTI->EMR, ExtiLine); -} - - -/** - * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 - * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine)); - -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management - * @{ - */ - -/** - * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 - * @note The configurable wakeup lines are edge-triggered. No glitch must be - * generated on these lines. If a rising edge on a configurable interrupt - * line occurs during a write operation in the EXTI_RTSR register, the - * pending bit is not set. - * Rising and falling edge triggers can be set for - * the same interrupt line. In this case, both generate a trigger - * condition. - * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->RTSR, ExtiLine); - -} - - -/** - * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 - * @note The configurable wakeup lines are edge-triggered. No glitch must be - * generated on these lines. If a rising edge on a configurable interrupt - * line occurs during a write operation in the EXTI_RTSR register, the - * pending bit is not set. - * Rising and falling edge triggers can be set for - * the same interrupt line. In this case, both generate a trigger - * condition. - * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) -{ - CLEAR_BIT(EXTI->RTSR, ExtiLine); - -} - - -/** - * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 - * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine)); -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management - * @{ - */ - -/** - * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 - * @note The configurable wakeup lines are edge-triggered. No glitch must be - * generated on these lines. If a falling edge on a configurable interrupt - * line occurs during a write operation in the EXTI_FTSR register, the - * pending bit is not set. - * Rising and falling edge triggers can be set for - * the same interrupt line. In this case, both generate a trigger - * condition. - * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->FTSR, ExtiLine); -} - - -/** - * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 - * @note The configurable wakeup lines are edge-triggered. No glitch must be - * generated on these lines. If a Falling edge on a configurable interrupt - * line occurs during a write operation in the EXTI_FTSR register, the - * pending bit is not set. - * Rising and falling edge triggers can be set for the same interrupt line. - * In this case, both generate a trigger condition. - * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) -{ - CLEAR_BIT(EXTI->FTSR, ExtiLine); -} - - -/** - * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 - * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine)); -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management - * @{ - */ - -/** - * @brief Generate a software Interrupt Event for Lines in range 0 to 31 - * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to - * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR - * resulting in an interrupt request generation. - * This bit is cleared by clearing the corresponding bit in the EXTI_PR - * register (by writing a 1 into the bit) - * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->SWIER, ExtiLine); -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management - * @{ - */ - -/** - * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 - * @note This bit is set when the selected edge event arrives on the interrupt - * line. This bit is cleared by writing a 1 to the bit. - * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine)); -} - - -/** - * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 - * @note This bit is set when the selected edge event arrives on the interrupt - * line. This bit is cleared by writing a 1 to the bit. - * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval @note This bit is set when the selected edge event arrives on the interrupt - */ -__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) -{ - return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine)); -} - - -/** - * @brief Clear ExtLine Flags for Lines in range 0 to 31 - * @note This bit is set when the selected edge event arrives on the interrupt - * line. This bit is cleared by writing a 1 to the bit. - * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) -{ - WRITE_REG(EXTI->PR, ExtiLine); -} - - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); -uint32_t LL_EXTI_DeInit(void); -void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); - - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* EXTI */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_EXTI_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h deleted file mode 100644 index 6bee7fd..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h +++ /dev/null @@ -1,981 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_gpio.h - * @author MCD Application Team - * @brief Header file of GPIO LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_GPIO_H -#define __STM32F4xx_LL_GPIO_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) - -/** @defgroup GPIO_LL GPIO - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros - * @{ - */ - -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures - * @{ - */ - -/** - * @brief LL GPIO Init Structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_LL_EC_PIN */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_MODE. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_SPEED. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ - - uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ - - uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_PULL. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ - - uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_AF. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ -} LL_GPIO_InitTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_LL_EC_PIN PIN - * @{ - */ -#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */ -#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */ -#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */ -#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */ -#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */ -#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */ -#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */ -#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */ -#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */ -#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */ -#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */ -#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */ -#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */ -#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */ -#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */ -#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */ -#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \ - GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \ - GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \ - GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \ - GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \ - GPIO_BSRR_BS_15) /*!< Select all pins */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_MODE Mode - * @{ - */ -#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ -#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */ -#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */ -#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_OUTPUT Output Type - * @{ - */ -#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ -#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_SPEED Output Speed - * @{ - */ -#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ -#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */ -#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */ -#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down - * @{ - */ -#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ -#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */ -#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_AF Alternate Function - * @{ - */ -#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ -#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ -#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ -#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ -#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ -#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ -#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ -#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ -#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ -#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ -#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ -#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ -#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ -#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ -#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ -#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in GPIO register - * @param __INSTANCE__ GPIO Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in GPIO register - * @param __INSTANCE__ GPIO Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration - * @{ - */ - -/** - * @brief Configure gpio mode for a dedicated pin on dedicated port. - * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll MODER MODEy LL_GPIO_SetPinMode - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Mode This parameter can be one of the following values: - * @arg @ref LL_GPIO_MODE_INPUT - * @arg @ref LL_GPIO_MODE_OUTPUT - * @arg @ref LL_GPIO_MODE_ALTERNATE - * @arg @ref LL_GPIO_MODE_ANALOG - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) -{ - MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio mode for a dedicated pin on dedicated port. - * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll MODER MODEy LL_GPIO_GetPinMode - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_MODE_INPUT - * @arg @ref LL_GPIO_MODE_OUTPUT - * @arg @ref LL_GPIO_MODE_ALTERNATE - * @arg @ref LL_GPIO_MODE_ANALOG - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->MODER, - (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio output type for several pins on dedicated port. - * @note Output type as to be set when gpio pin is in output or - * alternate modes. Possible type are Push-pull or Open-drain. - * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @param OutputType This parameter can be one of the following values: - * @arg @ref LL_GPIO_OUTPUT_PUSHPULL - * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) -{ - MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); -} - -/** - * @brief Return gpio output type for several pins on dedicated port. - * @note Output type as to be set when gpio pin is in output or - * alternate modes. Possible type are Push-pull or Open-drain. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_OUTPUT_PUSHPULL - * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); -} - -/** - * @brief Configure gpio speed for a dedicated pin on dedicated port. - * @note I/O speed can be Low, Medium, Fast or High speed. - * @note Warning: only one pin can be passed as parameter. - * @note Refer to datasheet for frequency specifications and the power - * supply and load conditions for each speed. - * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Speed This parameter can be one of the following values: - * @arg @ref LL_GPIO_SPEED_FREQ_LOW - * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM - * @arg @ref LL_GPIO_SPEED_FREQ_HIGH - * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) -{ - MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)), - (Speed << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio speed for a dedicated pin on dedicated port. - * @note I/O speed can be Low, Medium, Fast or High speed. - * @note Warning: only one pin can be passed as parameter. - * @note Refer to datasheet for frequency specifications and the power - * supply and load conditions for each speed. - * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_SPEED_FREQ_LOW - * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM - * @arg @ref LL_GPIO_SPEED_FREQ_HIGH - * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, - (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Pull This parameter can be one of the following values: - * @arg @ref LL_GPIO_PULL_NO - * @arg @ref LL_GPIO_PULL_UP - * @arg @ref LL_GPIO_PULL_DOWN - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) -{ - MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port - * @note Warning: only one pin can be passed as parameter. - * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_PULL_NO - * @arg @ref LL_GPIO_PULL_UP - * @arg @ref LL_GPIO_PULL_DOWN - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->PUPDR, - (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @param Alternate This parameter can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) -{ - MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)), - (Alternate << (POSITION_VAL(Pin) * 4U))); -} - -/** - * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. - * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - */ -__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->AFR[0], - (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); -} - -/** - * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Alternate This parameter can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) -{ - MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)), - (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); -} - -/** - * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - */ -__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->AFR[1], - (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U)); -} - - -/** - * @brief Lock configuration of several pins for a dedicated port. - * @note When the lock sequence has been applied on a port bit, the - * value of this port bit can no longer be modified until the - * next reset. - * @note Each lock bit freezes a specific configuration register - * (control and alternate function registers). - * @rmtoll LCKR LCKK LL_GPIO_LockPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - __IO uint32_t temp; - WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); - WRITE_REG(GPIOx->LCKR, PinMask); - WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); - temp = READ_REG(GPIOx->LCKR); - (void) temp; -} - -/** - * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. - * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)); -} - -/** - * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. - * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked - * @param GPIOx GPIO Port - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) -{ - return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)); -} - -/** - * @} - */ - -/** @defgroup GPIO_LL_EF_Data_Access Data Access - * @{ - */ - -/** - * @brief Return full input data register value for a dedicated port. - * @rmtoll IDR IDy LL_GPIO_ReadInputPort - * @param GPIOx GPIO Port - * @retval Input data register value of port - */ -__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) -{ - return (uint32_t)(READ_REG(GPIOx->IDR)); -} - -/** - * @brief Return if input data level for several pins of dedicated port is high or low. - * @rmtoll IDR IDy LL_GPIO_IsInputPinSet - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask)); -} - -/** - * @brief Write output data register for the port. - * @rmtoll ODR ODy LL_GPIO_WriteOutputPort - * @param GPIOx GPIO Port - * @param PortValue Level value for each pin of the port - * @retval None - */ -__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) -{ - WRITE_REG(GPIOx->ODR, PortValue); -} - -/** - * @brief Return full output data register value for a dedicated port. - * @rmtoll ODR ODy LL_GPIO_ReadOutputPort - * @param GPIOx GPIO Port - * @retval Output data register value of port - */ -__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) -{ - return (uint32_t)(READ_REG(GPIOx->ODR)); -} - -/** - * @brief Return if input data level for several pins of dedicated port is high or low. - * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask)); -} - -/** - * @brief Set several pins to high level on dedicated gpio port. - * @rmtoll BSRR BSy LL_GPIO_SetOutputPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - WRITE_REG(GPIOx->BSRR, PinMask); -} - -/** - * @brief Set several pins to low level on dedicated gpio port. - * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - WRITE_REG(GPIOx->BSRR, (PinMask << 16)); -} - -/** - * @brief Toggle data value for several pin of dedicated port. - * @rmtoll ODR ODy LL_GPIO_TogglePin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - uint32_t odr = READ_REG(GPIOx->ODR); - WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); -ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); -void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */ -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_GPIO_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h deleted file mode 100644 index babba6b..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h +++ /dev/null @@ -1,1890 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_i2c.h - * @author MCD Application Team - * @brief Header file of I2C LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_I2C_H -#define __STM32F4xx_LL_I2C_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (I2C1) || defined (I2C2) || defined (I2C3) - -/** @defgroup I2C_LL I2C - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2C_LL_Private_Constants I2C Private Constants - * @{ - */ - -/* Defines used to perform compute and check in the macros */ -#define LL_I2C_MAX_SPEED_STANDARD 100000U -#define LL_I2C_MAX_SPEED_FAST 400000U -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup I2C_LL_Private_Macros I2C Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure - * @{ - */ -typedef struct -{ - uint32_t PeripheralMode; /*!< Specifies the peripheral mode. - This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE - - This feature can be modified afterwards using unitary function @ref LL_I2C_SetMode(). */ - - uint32_t ClockSpeed; /*!< Specifies the clock frequency. - This parameter must be set to a value lower than 400kHz (in Hz) - - This feature can be modified afterwards using unitary function @ref LL_I2C_SetClockPeriod() - or @ref LL_I2C_SetDutyCycle() or @ref LL_I2C_SetClockSpeedMode() or @ref LL_I2C_ConfigSpeed(). */ - - uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. - This parameter can be a value of @ref I2C_LL_EC_DUTYCYCLE - - This feature can be modified afterwards using unitary function @ref LL_I2C_SetDutyCycle(). */ - -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) - uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. - This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION - - This feature can be modified afterwards using unitary functions @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ - - uint32_t DigitalFilter; /*!< Configures the digital noise filter. - This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F - - This feature can be modified afterwards using unitary function @ref LL_I2C_SetDigitalFilter(). */ - -#endif - uint32_t OwnAddress1; /*!< Specifies the device own address 1. - This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF - - This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ - - uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. - This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE - - This feature can be modified afterwards using unitary function @ref LL_I2C_AcknowledgeNextData(). */ - - uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). - This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1 - - This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ -} LL_I2C_InitTypeDef; -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_I2C_ReadReg function - * @{ - */ -#define LL_I2C_SR1_SB I2C_SR1_SB /*!< Start Bit (master mode) */ -#define LL_I2C_SR1_ADDR I2C_SR1_ADDR /*!< Address sent (master mode) or - Address matched flag (slave mode) */ -#define LL_I2C_SR1_BTF I2C_SR1_BTF /*!< Byte Transfer Finished flag */ -#define LL_I2C_SR1_ADD10 I2C_SR1_ADD10 /*!< 10-bit header sent (master mode) */ -#define LL_I2C_SR1_STOPF I2C_SR1_STOPF /*!< Stop detection flag (slave mode) */ -#define LL_I2C_SR1_RXNE I2C_SR1_RXNE /*!< Data register not empty (receivers) */ -#define LL_I2C_SR1_TXE I2C_SR1_TXE /*!< Data register empty (transmitters) */ -#define LL_I2C_SR1_BERR I2C_SR1_BERR /*!< Bus error */ -#define LL_I2C_SR1_ARLO I2C_SR1_ARLO /*!< Arbitration lost */ -#define LL_I2C_SR1_AF I2C_SR1_AF /*!< Acknowledge failure flag */ -#define LL_I2C_SR1_OVR I2C_SR1_OVR /*!< Overrun/Underrun */ -#define LL_I2C_SR1_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ -#define LL_I2C_SR1_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ -#define LL_I2C_SR1_SMALERT I2C_ISR_SMALERT /*!< SMBus alert (SMBus mode) */ -#define LL_I2C_SR2_MSL I2C_SR2_MSL /*!< Master/Slave flag */ -#define LL_I2C_SR2_BUSY I2C_SR2_BUSY /*!< Bus busy flag */ -#define LL_I2C_SR2_TRA I2C_SR2_TRA /*!< Transmitter/receiver direction */ -#define LL_I2C_SR2_GENCALL I2C_SR2_GENCALL /*!< General call address (Slave mode) */ -#define LL_I2C_SR2_SMBDEFAULT I2C_SR2_SMBDEFAULT /*!< SMBus Device default address (Slave mode) */ -#define LL_I2C_SR2_SMBHOST I2C_SR2_SMBHOST /*!< SMBus Host address (Slave mode) */ -#define LL_I2C_SR2_DUALF I2C_SR2_DUALF /*!< Dual flag (Slave mode) */ -/** - * @} - */ - -/** @defgroup I2C_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions - * @{ - */ -#define LL_I2C_CR2_ITEVTEN I2C_CR2_ITEVTEN /*!< Events interrupts enable */ -#define LL_I2C_CR2_ITBUFEN I2C_CR2_ITBUFEN /*!< Buffer interrupts enable */ -#define LL_I2C_CR2_ITERREN I2C_CR2_ITERREN /*!< Error interrupts enable */ -/** - * @} - */ - -#if defined(I2C_FLTR_ANOFF) -/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection - * @{ - */ -#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ -#define LL_I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF /*!< Analog filter is disabled.*/ -/** - * @} - */ - -#endif -/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length - * @{ - */ -#define LL_I2C_OWNADDRESS1_7BIT 0x00004000U /*!< Own address 1 is a 7-bit address. */ -#define LL_I2C_OWNADDRESS1_10BIT (uint32_t)(I2C_OAR1_ADDMODE | 0x00004000U) /*!< Own address 1 is a 10-bit address. */ -/** - * @} - */ - -/** @defgroup I2C_LL_EC_DUTYCYCLE Fast Mode Duty Cycle - * @{ - */ -#define LL_I2C_DUTYCYCLE_2 0x00000000U /*!< I2C fast mode Tlow/Thigh = 2 */ -#define LL_I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY /*!< I2C fast mode Tlow/Thigh = 16/9 */ -/** - * @} - */ - -/** @defgroup I2C_LL_EC_CLOCK_SPEED_MODE Master Clock Speed Mode - * @{ - */ -#define LL_I2C_CLOCK_SPEED_STANDARD_MODE 0x00000000U /*!< Master clock speed range is standard mode */ -#define LL_I2C_CLOCK_SPEED_FAST_MODE I2C_CCR_FS /*!< Master clock speed range is fast mode */ -/** - * @} - */ - -/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode - * @{ - */ -#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ -#define LL_I2C_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP) /*!< SMBus Host address acknowledge */ -#define LL_I2C_MODE_SMBUS_DEVICE I2C_CR1_SMBUS /*!< SMBus Device default mode (Default address not acknowledge) */ -#define LL_I2C_MODE_SMBUS_DEVICE_ARP (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_ENARP) /*!< SMBus Device Default address acknowledge */ -/** - * @} - */ - -/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation - * @{ - */ -#define LL_I2C_ACK I2C_CR1_ACK /*!< ACK is sent after current received byte. */ -#define LL_I2C_NACK 0x00000000U /*!< NACK is sent after current received byte.*/ -/** - * @} - */ - -/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction - * @{ - */ -#define LL_I2C_DIRECTION_WRITE I2C_SR2_TRA /*!< Bus is in write transfer */ -#define LL_I2C_DIRECTION_READ 0x00000000U /*!< Bus is in read transfer */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros - * @{ - */ - -/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in I2C register - * @param __INSTANCE__ I2C Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in I2C register - * @param __INSTANCE__ I2C Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** @defgroup I2C_LL_EM_Exported_Macros_Helper Exported_Macros_Helper - * @{ - */ - -/** - * @brief Convert Peripheral Clock Frequency in Mhz. - * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). - * @retval Value of peripheral clock (in Mhz) - */ -#define __LL_I2C_FREQ_HZ_TO_MHZ(__PCLK__) (uint32_t)((__PCLK__)/1000000U) - -/** - * @brief Convert Peripheral Clock Frequency in Hz. - * @param __PCLK__ This parameter must be a value of peripheral clock (in Mhz). - * @retval Value of peripheral clock (in Hz) - */ -#define __LL_I2C_FREQ_MHZ_TO_HZ(__PCLK__) (uint32_t)((__PCLK__)*1000000U) - -/** - * @brief Compute I2C Clock rising time. - * @param __FREQRANGE__ This parameter must be a value of peripheral clock (in Mhz). - * @param __SPEED__ This parameter must be a value lower than 400kHz (in Hz). - * @retval Value between Min_Data=0x02 and Max_Data=0x3F - */ -#define __LL_I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (uint32_t)(((__SPEED__) <= LL_I2C_MAX_SPEED_STANDARD) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U)) - -/** - * @brief Compute Speed clock range to a Clock Control Register (I2C_CCR_CCR) value. - * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). - * @param __SPEED__ This parameter must be a value lower than 400kHz (in Hz). - * @param __DUTYCYCLE__ This parameter can be one of the following values: - * @arg @ref LL_I2C_DUTYCYCLE_2 - * @arg @ref LL_I2C_DUTYCYCLE_16_9 - * @retval Value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. - */ -#define __LL_I2C_SPEED_TO_CCR(__PCLK__, __SPEED__, __DUTYCYCLE__) (uint32_t)(((__SPEED__) <= LL_I2C_MAX_SPEED_STANDARD)? \ - (__LL_I2C_SPEED_STANDARD_TO_CCR((__PCLK__), (__SPEED__))) : \ - (__LL_I2C_SPEED_FAST_TO_CCR((__PCLK__), (__SPEED__), (__DUTYCYCLE__)))) - -/** - * @brief Compute Speed Standard clock range to a Clock Control Register (I2C_CCR_CCR) value. - * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). - * @param __SPEED__ This parameter must be a value lower than 100kHz (in Hz). - * @retval Value between Min_Data=0x004 and Max_Data=0xFFF. - */ -#define __LL_I2C_SPEED_STANDARD_TO_CCR(__PCLK__, __SPEED__) (uint32_t)(((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U))) - -/** - * @brief Compute Speed Fast clock range to a Clock Control Register (I2C_CCR_CCR) value. - * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). - * @param __SPEED__ This parameter must be a value between Min_Data=100Khz and Max_Data=400Khz (in Hz). - * @param __DUTYCYCLE__ This parameter can be one of the following values: - * @arg @ref LL_I2C_DUTYCYCLE_2 - * @arg @ref LL_I2C_DUTYCYCLE_16_9 - * @retval Value between Min_Data=0x001 and Max_Data=0xFFF - */ -#define __LL_I2C_SPEED_FAST_TO_CCR(__PCLK__, __SPEED__, __DUTYCYCLE__) (uint32_t)(((__DUTYCYCLE__) == LL_I2C_DUTYCYCLE_2)? \ - (((((__PCLK__) / ((__SPEED__) * 3U)) & I2C_CCR_CCR) == 0U)? 1U:((__PCLK__) / ((__SPEED__) * 3U))) : \ - (((((__PCLK__) / ((__SPEED__) * 25U)) & I2C_CCR_CCR) == 0U)? 1U:((__PCLK__) / ((__SPEED__) * 25U)))) - -/** - * @brief Get the Least significant bits of a 10-Bits address. - * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -#define __LL_I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) - -/** - * @brief Convert a 10-Bits address to a 10-Bits header with Write direction. - * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. - * @retval Value between Min_Data=0xF0 and Max_Data=0xF6 - */ -#define __LL_I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0)))) - -/** - * @brief Convert a 10-Bits address to a 10-Bits header with Read direction. - * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. - * @retval Value between Min_Data=0xF1 and Max_Data=0xF7 - */ -#define __LL_I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1)))) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions - * @{ - */ - -/** @defgroup I2C_LL_EF_Configuration Configuration - * @{ - */ - -/** - * @brief Enable I2C peripheral (PE = 1). - * @rmtoll CR1 PE LL_I2C_Enable - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_PE); -} - -/** - * @brief Disable I2C peripheral (PE = 0). - * @rmtoll CR1 PE LL_I2C_Disable - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); -} - -/** - * @brief Check if the I2C peripheral is enabled or disabled. - * @rmtoll CR1 PE LL_I2C_IsEnabled - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)); -} - -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -/** - * @brief Configure Noise Filters (Analog and Digital). - * @note If the analog filter is also enabled, the digital filter is added to analog filter. - * The filters can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll FLTR ANOFF LL_I2C_ConfigFilters\n - * FLTR DNF LL_I2C_ConfigFilters - * @param I2Cx I2C Instance. - * @param AnalogFilter This parameter can be one of the following values: - * @arg @ref LL_I2C_ANALOGFILTER_ENABLE - * @arg @ref LL_I2C_ANALOGFILTER_DISABLE - * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*TPCLK1) - * This parameter is used to configure the digital noise filter on SDA and SCL input. The digital filter will suppress the spikes with a length of up to DNF[3:0]*TPCLK1. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) -{ - MODIFY_REG(I2Cx->FLTR, I2C_FLTR_ANOFF | I2C_FLTR_DNF, AnalogFilter | DigitalFilter); -} -#endif -#if defined(I2C_FLTR_DNF) - -/** - * @brief Configure Digital Noise Filter. - * @note If the analog filter is also enabled, the digital filter is added to analog filter. - * This filter can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll FLTR DNF LL_I2C_SetDigitalFilter - * @param I2Cx I2C Instance. - * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*TPCLK1) - * This parameter is used to configure the digital noise filter on SDA and SCL input. The digital filter will suppress the spikes with a length of up to DNF[3:0]*TPCLK1. - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) -{ - MODIFY_REG(I2Cx->FLTR, I2C_FLTR_DNF, DigitalFilter); -} - -/** - * @brief Get the current Digital Noise Filter configuration. - * @rmtoll FLTR DNF LL_I2C_GetDigitalFilter - * @param I2Cx I2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0xF - */ -__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->FLTR, I2C_FLTR_DNF)); -} -#endif -#if defined(I2C_FLTR_ANOFF) - -/** - * @brief Enable Analog Noise Filter. - * @note This filter can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll FLTR ANOFF LL_I2C_EnableAnalogFilter - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF); -} - -/** - * @brief Disable Analog Noise Filter. - * @note This filter can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll FLTR ANOFF LL_I2C_DisableAnalogFilter - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF); -} - -/** - * @brief Check if Analog Noise Filter is enabled or disabled. - * @rmtoll FLTR ANOFF LL_I2C_IsEnabledAnalogFilter - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF) == (I2C_FLTR_ANOFF)); -} -#endif - -/** - * @brief Enable DMA transmission requests. - * @rmtoll CR2 DMAEN LL_I2C_EnableDMAReq_TX - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR2, I2C_CR2_DMAEN); -} - -/** - * @brief Disable DMA transmission requests. - * @rmtoll CR2 DMAEN LL_I2C_DisableDMAReq_TX - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR2, I2C_CR2_DMAEN); -} - -/** - * @brief Check if DMA transmission requests are enabled or disabled. - * @rmtoll CR2 DMAEN LL_I2C_IsEnabledDMAReq_TX - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR2, I2C_CR2_DMAEN) == (I2C_CR2_DMAEN)); -} - -/** - * @brief Enable DMA reception requests. - * @rmtoll CR2 DMAEN LL_I2C_EnableDMAReq_RX - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR2, I2C_CR2_DMAEN); -} - -/** - * @brief Disable DMA reception requests. - * @rmtoll CR2 DMAEN LL_I2C_DisableDMAReq_RX - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR2, I2C_CR2_DMAEN); -} - -/** - * @brief Check if DMA reception requests are enabled or disabled. - * @rmtoll CR2 DMAEN LL_I2C_IsEnabledDMAReq_RX - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR2, I2C_CR2_DMAEN) == (I2C_CR2_DMAEN)); -} - -/** - * @brief Get the data register address used for DMA transfer. - * @rmtoll DR DR LL_I2C_DMA_GetRegAddr - * @param I2Cx I2C Instance. - * @retval Address of data register - */ -__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(I2C_TypeDef *I2Cx) -{ - return (uint32_t) & (I2Cx->DR); -} - -/** - * @brief Enable Clock stretching. - * @note This bit can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); -} - -/** - * @brief Disable Clock stretching. - * @note This bit can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); -} - -/** - * @brief Check if Clock stretching is enabled or disabled. - * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)); -} - -/** - * @brief Enable General Call. - * @note When enabled the Address 0x00 is ACKed. - * @rmtoll CR1 ENGC LL_I2C_EnableGeneralCall - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_ENGC); -} - -/** - * @brief Disable General Call. - * @note When disabled the Address 0x00 is NACKed. - * @rmtoll CR1 ENGC LL_I2C_DisableGeneralCall - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR1, I2C_CR1_ENGC); -} - -/** - * @brief Check if General Call is enabled or disabled. - * @rmtoll CR1 ENGC LL_I2C_IsEnabledGeneralCall - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR1, I2C_CR1_ENGC) == (I2C_CR1_ENGC)); -} - -/** - * @brief Set the Own Address1. - * @rmtoll OAR1 ADD0 LL_I2C_SetOwnAddress1\n - * OAR1 ADD1_7 LL_I2C_SetOwnAddress1\n - * OAR1 ADD8_9 LL_I2C_SetOwnAddress1\n - * OAR1 ADDMODE LL_I2C_SetOwnAddress1 - * @param I2Cx I2C Instance. - * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. - * @param OwnAddrSize This parameter can be one of the following values: - * @arg @ref LL_I2C_OWNADDRESS1_7BIT - * @arg @ref LL_I2C_OWNADDRESS1_10BIT - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) -{ - MODIFY_REG(I2Cx->OAR1, I2C_OAR1_ADD0 | I2C_OAR1_ADD1_7 | I2C_OAR1_ADD8_9 | I2C_OAR1_ADDMODE, OwnAddress1 | OwnAddrSize); -} - -/** - * @brief Set the 7bits Own Address2. - * @note This action has no effect if own address2 is enabled. - * @rmtoll OAR2 ADD2 LL_I2C_SetOwnAddress2 - * @param I2Cx I2C Instance. - * @param OwnAddress2 This parameter must be a value between Min_Data=0 and Max_Data=0x7F. - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2) -{ - MODIFY_REG(I2Cx->OAR2, I2C_OAR2_ADD2, OwnAddress2); -} - -/** - * @brief Enable acknowledge on Own Address2 match address. - * @rmtoll OAR2 ENDUAL LL_I2C_EnableOwnAddress2 - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL); -} - -/** - * @brief Disable acknowledge on Own Address2 match address. - * @rmtoll OAR2 ENDUAL LL_I2C_DisableOwnAddress2 - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL); -} - -/** - * @brief Check if Own Address1 acknowledge is enabled or disabled. - * @rmtoll OAR2 ENDUAL LL_I2C_IsEnabledOwnAddress2 - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL) == (I2C_OAR2_ENDUAL)); -} - -/** - * @brief Configure the Peripheral clock frequency. - * @rmtoll CR2 FREQ LL_I2C_SetPeriphClock - * @param I2Cx I2C Instance. - * @param PeriphClock Peripheral Clock (in Hz) - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetPeriphClock(I2C_TypeDef *I2Cx, uint32_t PeriphClock) -{ - MODIFY_REG(I2Cx->CR2, I2C_CR2_FREQ, __LL_I2C_FREQ_HZ_TO_MHZ(PeriphClock)); -} - -/** - * @brief Get the Peripheral clock frequency. - * @rmtoll CR2 FREQ LL_I2C_GetPeriphClock - * @param I2Cx I2C Instance. - * @retval Value of Peripheral Clock (in Hz) - */ -__STATIC_INLINE uint32_t LL_I2C_GetPeriphClock(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(__LL_I2C_FREQ_MHZ_TO_HZ(READ_BIT(I2Cx->CR2, I2C_CR2_FREQ))); -} - -/** - * @brief Configure the Duty cycle (Fast mode only). - * @rmtoll CCR DUTY LL_I2C_SetDutyCycle - * @param I2Cx I2C Instance. - * @param DutyCycle This parameter can be one of the following values: - * @arg @ref LL_I2C_DUTYCYCLE_2 - * @arg @ref LL_I2C_DUTYCYCLE_16_9 - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetDutyCycle(I2C_TypeDef *I2Cx, uint32_t DutyCycle) -{ - MODIFY_REG(I2Cx->CCR, I2C_CCR_DUTY, DutyCycle); -} - -/** - * @brief Get the Duty cycle (Fast mode only). - * @rmtoll CCR DUTY LL_I2C_GetDutyCycle - * @param I2Cx I2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_I2C_DUTYCYCLE_2 - * @arg @ref LL_I2C_DUTYCYCLE_16_9 - */ -__STATIC_INLINE uint32_t LL_I2C_GetDutyCycle(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_DUTY)); -} - -/** - * @brief Configure the I2C master clock speed mode. - * @rmtoll CCR FS LL_I2C_SetClockSpeedMode - * @param I2Cx I2C Instance. - * @param ClockSpeedMode This parameter can be one of the following values: - * @arg @ref LL_I2C_CLOCK_SPEED_STANDARD_MODE - * @arg @ref LL_I2C_CLOCK_SPEED_FAST_MODE - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetClockSpeedMode(I2C_TypeDef *I2Cx, uint32_t ClockSpeedMode) -{ - MODIFY_REG(I2Cx->CCR, I2C_CCR_FS, ClockSpeedMode); -} - -/** - * @brief Get the the I2C master speed mode. - * @rmtoll CCR FS LL_I2C_GetClockSpeedMode - * @param I2Cx I2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_I2C_CLOCK_SPEED_STANDARD_MODE - * @arg @ref LL_I2C_CLOCK_SPEED_FAST_MODE - */ -__STATIC_INLINE uint32_t LL_I2C_GetClockSpeedMode(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_FS)); -} - -/** - * @brief Configure the SCL, SDA rising time. - * @note This bit can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll TRISE TRISE LL_I2C_SetRiseTime - * @param I2Cx I2C Instance. - * @param RiseTime This parameter must be a value between Min_Data=0x02 and Max_Data=0x3F. - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetRiseTime(I2C_TypeDef *I2Cx, uint32_t RiseTime) -{ - MODIFY_REG(I2Cx->TRISE, I2C_TRISE_TRISE, RiseTime); -} - -/** - * @brief Get the SCL, SDA rising time. - * @rmtoll TRISE TRISE LL_I2C_GetRiseTime - * @param I2Cx I2C Instance. - * @retval Value between Min_Data=0x02 and Max_Data=0x3F - */ -__STATIC_INLINE uint32_t LL_I2C_GetRiseTime(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->TRISE, I2C_TRISE_TRISE)); -} - -/** - * @brief Configure the SCL high and low period. - * @note This bit can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll CCR CCR LL_I2C_SetClockPeriod - * @param I2Cx I2C Instance. - * @param ClockPeriod This parameter must be a value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetClockPeriod(I2C_TypeDef *I2Cx, uint32_t ClockPeriod) -{ - MODIFY_REG(I2Cx->CCR, I2C_CCR_CCR, ClockPeriod); -} - -/** - * @brief Get the SCL high and low period. - * @rmtoll CCR CCR LL_I2C_GetClockPeriod - * @param I2Cx I2C Instance. - * @retval Value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. - */ -__STATIC_INLINE uint32_t LL_I2C_GetClockPeriod(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_CCR)); -} - -/** - * @brief Configure the SCL speed. - * @note This bit can only be programmed when the I2C is disabled (PE = 0). - * @rmtoll CR2 FREQ LL_I2C_ConfigSpeed\n - * TRISE TRISE LL_I2C_ConfigSpeed\n - * CCR FS LL_I2C_ConfigSpeed\n - * CCR DUTY LL_I2C_ConfigSpeed\n - * CCR CCR LL_I2C_ConfigSpeed - * @param I2Cx I2C Instance. - * @param PeriphClock Peripheral Clock (in Hz) - * @param ClockSpeed This parameter must be a value lower than 400kHz (in Hz). - * @param DutyCycle This parameter can be one of the following values: - * @arg @ref LL_I2C_DUTYCYCLE_2 - * @arg @ref LL_I2C_DUTYCYCLE_16_9 - * @retval None - */ -__STATIC_INLINE void LL_I2C_ConfigSpeed(I2C_TypeDef *I2Cx, uint32_t PeriphClock, uint32_t ClockSpeed, - uint32_t DutyCycle) -{ - uint32_t freqrange = 0x0U; - uint32_t clockconfig = 0x0U; - - /* Compute frequency range */ - freqrange = __LL_I2C_FREQ_HZ_TO_MHZ(PeriphClock); - - /* Configure I2Cx: Frequency range register */ - MODIFY_REG(I2Cx->CR2, I2C_CR2_FREQ, freqrange); - - /* Configure I2Cx: Rise Time register */ - MODIFY_REG(I2Cx->TRISE, I2C_TRISE_TRISE, __LL_I2C_RISE_TIME(freqrange, ClockSpeed)); - - /* Configure Speed mode, Duty Cycle and Clock control register value */ - if (ClockSpeed > LL_I2C_MAX_SPEED_STANDARD) - { - /* Set Speed mode at fast and duty cycle for Clock Speed request in fast clock range */ - clockconfig = LL_I2C_CLOCK_SPEED_FAST_MODE | \ - __LL_I2C_SPEED_FAST_TO_CCR(PeriphClock, ClockSpeed, DutyCycle) | \ - DutyCycle; - } - else - { - /* Set Speed mode at standard for Clock Speed request in standard clock range */ - clockconfig = LL_I2C_CLOCK_SPEED_STANDARD_MODE | \ - __LL_I2C_SPEED_STANDARD_TO_CCR(PeriphClock, ClockSpeed); - } - - /* Configure I2Cx: Clock control register */ - MODIFY_REG(I2Cx->CCR, (I2C_CCR_FS | I2C_CCR_DUTY | I2C_CCR_CCR), clockconfig); -} - -/** - * @brief Configure peripheral mode. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll CR1 SMBUS LL_I2C_SetMode\n - * CR1 SMBTYPE LL_I2C_SetMode\n - * CR1 ENARP LL_I2C_SetMode - * @param I2Cx I2C Instance. - * @param PeripheralMode This parameter can be one of the following values: - * @arg @ref LL_I2C_MODE_I2C - * @arg @ref LL_I2C_MODE_SMBUS_HOST - * @arg @ref LL_I2C_MODE_SMBUS_DEVICE - * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP - * @retval None - */ -__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) -{ - MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP, PeripheralMode); -} - -/** - * @brief Get peripheral mode. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll CR1 SMBUS LL_I2C_GetMode\n - * CR1 SMBTYPE LL_I2C_GetMode\n - * CR1 ENARP LL_I2C_GetMode - * @param I2Cx I2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_I2C_MODE_I2C - * @arg @ref LL_I2C_MODE_SMBUS_HOST - * @arg @ref LL_I2C_MODE_SMBUS_DEVICE - * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP - */ -__STATIC_INLINE uint32_t LL_I2C_GetMode(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP)); -} - -/** - * @brief Enable SMBus alert (Host or Device mode) - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @note SMBus Device mode: - * - SMBus Alert pin is drived low and - * Alert Response Address Header acknowledge is enabled. - * SMBus Host mode: - * - SMBus Alert pin management is supported. - * @rmtoll CR1 ALERT LL_I2C_EnableSMBusAlert - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_ALERT); -} - -/** - * @brief Disable SMBus alert (Host or Device mode) - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @note SMBus Device mode: - * - SMBus Alert pin is not drived (can be used as a standard GPIO) and - * Alert Response Address Header acknowledge is disabled. - * SMBus Host mode: - * - SMBus Alert pin management is not supported. - * @rmtoll CR1 ALERT LL_I2C_DisableSMBusAlert - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERT); -} - -/** - * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll CR1 ALERT LL_I2C_IsEnabledSMBusAlert - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR1, I2C_CR1_ALERT) == (I2C_CR1_ALERT)); -} - -/** - * @brief Enable SMBus Packet Error Calculation (PEC). - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll CR1 ENPEC LL_I2C_EnableSMBusPEC - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_ENPEC); -} - -/** - * @brief Disable SMBus Packet Error Calculation (PEC). - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll CR1 ENPEC LL_I2C_DisableSMBusPEC - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR1, I2C_CR1_ENPEC); -} - -/** - * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll CR1 ENPEC LL_I2C_IsEnabledSMBusPEC - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR1, I2C_CR1_ENPEC) == (I2C_CR1_ENPEC)); -} - -/** - * @} - */ - -/** @defgroup I2C_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable TXE interrupt. - * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_TX\n - * CR2 ITBUFEN LL_I2C_EnableIT_TX - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); -} - -/** - * @brief Disable TXE interrupt. - * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_TX\n - * CR2 ITBUFEN LL_I2C_DisableIT_TX - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); -} - -/** - * @brief Check if the TXE Interrupt is enabled or disabled. - * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_TX\n - * CR2 ITBUFEN LL_I2C_IsEnabledIT_TX - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN) == (I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN)); -} - -/** - * @brief Enable RXNE interrupt. - * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_RX\n - * CR2 ITBUFEN LL_I2C_EnableIT_RX - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); -} - -/** - * @brief Disable RXNE interrupt. - * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_RX\n - * CR2 ITBUFEN LL_I2C_DisableIT_RX - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); -} - -/** - * @brief Check if the RXNE Interrupt is enabled or disabled. - * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_RX\n - * CR2 ITBUFEN LL_I2C_IsEnabledIT_RX - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN) == (I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN)); -} - -/** - * @brief Enable Events interrupts. - * @note Any of these events will generate interrupt : - * Start Bit (SB) - * Address sent, Address matched (ADDR) - * 10-bit header sent (ADD10) - * Stop detection (STOPF) - * Byte transfer finished (BTF) - * - * @note Any of these events will generate interrupt if Buffer interrupts are enabled too(using unitary function @ref LL_I2C_EnableIT_BUF()) : - * Receive buffer not empty (RXNE) - * Transmit buffer empty (TXE) - * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_EVT - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableIT_EVT(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN); -} - -/** - * @brief Disable Events interrupts. - * @note Any of these events will generate interrupt : - * Start Bit (SB) - * Address sent, Address matched (ADDR) - * 10-bit header sent (ADD10) - * Stop detection (STOPF) - * Byte transfer finished (BTF) - * Receive buffer not empty (RXNE) - * Transmit buffer empty (TXE) - * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_EVT - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableIT_EVT(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN); -} - -/** - * @brief Check if Events interrupts are enabled or disabled. - * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_EVT - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_EVT(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN) == (I2C_CR2_ITEVTEN)); -} - -/** - * @brief Enable Buffer interrupts. - * @note Any of these Buffer events will generate interrupt if Events interrupts are enabled too(using unitary function @ref LL_I2C_EnableIT_EVT()) : - * Receive buffer not empty (RXNE) - * Transmit buffer empty (TXE) - * @rmtoll CR2 ITBUFEN LL_I2C_EnableIT_BUF - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableIT_BUF(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN); -} - -/** - * @brief Disable Buffer interrupts. - * @note Any of these Buffer events will generate interrupt : - * Receive buffer not empty (RXNE) - * Transmit buffer empty (TXE) - * @rmtoll CR2 ITBUFEN LL_I2C_DisableIT_BUF - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableIT_BUF(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN); -} - -/** - * @brief Check if Buffer interrupts are enabled or disabled. - * @rmtoll CR2 ITBUFEN LL_I2C_IsEnabledIT_BUF - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_BUF(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN) == (I2C_CR2_ITBUFEN)); -} - -/** - * @brief Enable Error interrupts. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @note Any of these errors will generate interrupt : - * Bus Error detection (BERR) - * Arbitration Loss (ARLO) - * Acknowledge Failure(AF) - * Overrun/Underrun (OVR) - * SMBus Timeout detection (TIMEOUT) - * SMBus PEC error detection (PECERR) - * SMBus Alert pin event detection (SMBALERT) - * @rmtoll CR2 ITERREN LL_I2C_EnableIT_ERR - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR2, I2C_CR2_ITERREN); -} - -/** - * @brief Disable Error interrupts. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @note Any of these errors will generate interrupt : - * Bus Error detection (BERR) - * Arbitration Loss (ARLO) - * Acknowledge Failure(AF) - * Overrun/Underrun (OVR) - * SMBus Timeout detection (TIMEOUT) - * SMBus PEC error detection (PECERR) - * SMBus Alert pin event detection (SMBALERT) - * @rmtoll CR2 ITERREN LL_I2C_DisableIT_ERR - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITERREN); -} - -/** - * @brief Check if Error interrupts are enabled or disabled. - * @rmtoll CR2 ITERREN LL_I2C_IsEnabledIT_ERR - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR2, I2C_CR2_ITERREN) == (I2C_CR2_ITERREN)); -} - -/** - * @} - */ - -/** @defgroup I2C_LL_EF_FLAG_management FLAG_management - * @{ - */ - -/** - * @brief Indicate the status of Transmit data register empty flag. - * @note RESET: When next data is written in Transmit data register. - * SET: When Transmit data register is empty. - * @rmtoll SR1 TXE LL_I2C_IsActiveFlag_TXE - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_TXE) == (I2C_SR1_TXE)); -} - -/** - * @brief Indicate the status of Byte Transfer Finished flag. - * RESET: When Data byte transfer not done. - * SET: When Data byte transfer succeeded. - * @rmtoll SR1 BTF LL_I2C_IsActiveFlag_BTF - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BTF(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_BTF) == (I2C_SR1_BTF)); -} - -/** - * @brief Indicate the status of Receive data register not empty flag. - * @note RESET: When Receive data register is read. - * SET: When the received data is copied in Receive data register. - * @rmtoll SR1 RXNE LL_I2C_IsActiveFlag_RXNE - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_RXNE) == (I2C_SR1_RXNE)); -} - -/** - * @brief Indicate the status of Start Bit (master mode). - * @note RESET: When No Start condition. - * SET: When Start condition is generated. - * @rmtoll SR1 SB LL_I2C_IsActiveFlag_SB - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_SB(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_SB) == (I2C_SR1_SB)); -} - -/** - * @brief Indicate the status of Address sent (master mode) or Address matched flag (slave mode). - * @note RESET: Clear default value. - * SET: When the address is fully sent (master mode) or when the received slave address matched with one of the enabled slave address (slave mode). - * @rmtoll SR1 ADDR LL_I2C_IsActiveFlag_ADDR - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_ADDR) == (I2C_SR1_ADDR)); -} - -/** - * @brief Indicate the status of 10-bit header sent (master mode). - * @note RESET: When no ADD10 event occurred. - * SET: When the master has sent the first address byte (header). - * @rmtoll SR1 ADD10 LL_I2C_IsActiveFlag_ADD10 - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADD10(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_ADD10) == (I2C_SR1_ADD10)); -} - -/** - * @brief Indicate the status of Acknowledge failure flag. - * @note RESET: No acknowledge failure. - * SET: When an acknowledge failure is received after a byte transmission. - * @rmtoll SR1 AF LL_I2C_IsActiveFlag_AF - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_AF(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_AF) == (I2C_SR1_AF)); -} - -/** - * @brief Indicate the status of Stop detection flag (slave mode). - * @note RESET: Clear default value. - * SET: When a Stop condition is detected. - * @rmtoll SR1 STOPF LL_I2C_IsActiveFlag_STOP - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_STOPF) == (I2C_SR1_STOPF)); -} - -/** - * @brief Indicate the status of Bus error flag. - * @note RESET: Clear default value. - * SET: When a misplaced Start or Stop condition is detected. - * @rmtoll SR1 BERR LL_I2C_IsActiveFlag_BERR - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_BERR) == (I2C_SR1_BERR)); -} - -/** - * @brief Indicate the status of Arbitration lost flag. - * @note RESET: Clear default value. - * SET: When arbitration lost. - * @rmtoll SR1 ARLO LL_I2C_IsActiveFlag_ARLO - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_ARLO) == (I2C_SR1_ARLO)); -} - -/** - * @brief Indicate the status of Overrun/Underrun flag. - * @note RESET: Clear default value. - * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). - * @rmtoll SR1 OVR LL_I2C_IsActiveFlag_OVR - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_OVR) == (I2C_SR1_OVR)); -} - -/** - * @brief Indicate the status of SMBus PEC error flag in reception. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll SR1 PECERR LL_I2C_IsActiveSMBusFlag_PECERR - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_PECERR) == (I2C_SR1_PECERR)); -} - -/** - * @brief Indicate the status of SMBus Timeout detection flag. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll SR1 TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_TIMEOUT) == (I2C_SR1_TIMEOUT)); -} - -/** - * @brief Indicate the status of SMBus alert flag. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll SR1 SMBALERT LL_I2C_IsActiveSMBusFlag_ALERT - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR1, I2C_SR1_SMBALERT) == (I2C_SR1_SMBALERT)); -} - -/** - * @brief Indicate the status of Bus Busy flag. - * @note RESET: Clear default value. - * SET: When a Start condition is detected. - * @rmtoll SR2 BUSY LL_I2C_IsActiveFlag_BUSY - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR2, I2C_SR2_BUSY) == (I2C_SR2_BUSY)); -} - -/** - * @brief Indicate the status of Dual flag. - * @note RESET: Received address matched with OAR1. - * SET: Received address matched with OAR2. - * @rmtoll SR2 DUALF LL_I2C_IsActiveFlag_DUAL - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_DUAL(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR2, I2C_SR2_DUALF) == (I2C_SR2_DUALF)); -} - -/** - * @brief Indicate the status of SMBus Host address reception (Slave mode). - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @note RESET: No SMBus Host address - * SET: SMBus Host address received. - * @note This status is cleared by hardware after a STOP condition or repeated START condition. - * @rmtoll SR2 SMBHOST LL_I2C_IsActiveSMBusFlag_SMBHOST - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_SMBHOST(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR2, I2C_SR2_SMBHOST) == (I2C_SR2_SMBHOST)); -} - -/** - * @brief Indicate the status of SMBus Device default address reception (Slave mode). - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @note RESET: No SMBus Device default address - * SET: SMBus Device default address received. - * @note This status is cleared by hardware after a STOP condition or repeated START condition. - * @rmtoll SR2 SMBDEFAULT LL_I2C_IsActiveSMBusFlag_SMBDEFAULT - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_SMBDEFAULT(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR2, I2C_SR2_SMBDEFAULT) == (I2C_SR2_SMBDEFAULT)); -} - -/** - * @brief Indicate the status of General call address reception (Slave mode). - * @note RESET: No General call address - * SET: General call address received. - * @note This status is cleared by hardware after a STOP condition or repeated START condition. - * @rmtoll SR2 GENCALL LL_I2C_IsActiveFlag_GENCALL - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_GENCALL(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR2, I2C_SR2_GENCALL) == (I2C_SR2_GENCALL)); -} - -/** - * @brief Indicate the status of Master/Slave flag. - * @note RESET: Slave Mode. - * SET: Master Mode. - * @rmtoll SR2 MSL LL_I2C_IsActiveFlag_MSL - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_MSL(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->SR2, I2C_SR2_MSL) == (I2C_SR2_MSL)); -} - -/** - * @brief Clear Address Matched flag. - * @note Clearing this flag is done by a read access to the I2Cx_SR1 - * register followed by a read access to the I2Cx_SR2 register. - * @rmtoll SR1 ADDR LL_I2C_ClearFlag_ADDR - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) -{ - __IO uint32_t tmpreg; - tmpreg = I2Cx->SR1; - (void) tmpreg; - tmpreg = I2Cx->SR2; - (void) tmpreg; -} - -/** - * @brief Clear Acknowledge failure flag. - * @rmtoll SR1 AF LL_I2C_ClearFlag_AF - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearFlag_AF(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->SR1, I2C_SR1_AF); -} - -/** - * @brief Clear Stop detection flag. - * @note Clearing this flag is done by a read access to the I2Cx_SR1 - * register followed by a write access to I2Cx_CR1 register. - * @rmtoll SR1 STOPF LL_I2C_ClearFlag_STOP\n - * CR1 PE LL_I2C_ClearFlag_STOP - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) -{ - __IO uint32_t tmpreg; - tmpreg = I2Cx->SR1; - (void) tmpreg; - SET_BIT(I2Cx->CR1, I2C_CR1_PE); -} - -/** - * @brief Clear Bus error flag. - * @rmtoll SR1 BERR LL_I2C_ClearFlag_BERR - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->SR1, I2C_SR1_BERR); -} - -/** - * @brief Clear Arbitration lost flag. - * @rmtoll SR1 ARLO LL_I2C_ClearFlag_ARLO - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->SR1, I2C_SR1_ARLO); -} - -/** - * @brief Clear Overrun/Underrun flag. - * @rmtoll SR1 OVR LL_I2C_ClearFlag_OVR - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->SR1, I2C_SR1_OVR); -} - -/** - * @brief Clear SMBus PEC error flag. - * @rmtoll SR1 PECERR LL_I2C_ClearSMBusFlag_PECERR - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->SR1, I2C_SR1_PECERR); -} - -/** - * @brief Clear SMBus Timeout detection flag. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll SR1 TIMEOUT LL_I2C_ClearSMBusFlag_TIMEOUT - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->SR1, I2C_SR1_TIMEOUT); -} - -/** - * @brief Clear SMBus Alert flag. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll SR1 SMBALERT LL_I2C_ClearSMBusFlag_ALERT - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->SR1, I2C_SR1_SMBALERT); -} - -/** - * @} - */ - -/** @defgroup I2C_LL_EF_Data_Management Data_Management - * @{ - */ - -/** - * @brief Enable Reset of I2C peripheral. - * @rmtoll CR1 SWRST LL_I2C_EnableReset - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableReset(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_SWRST); -} - -/** - * @brief Disable Reset of I2C peripheral. - * @rmtoll CR1 SWRST LL_I2C_DisableReset - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableReset(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR1, I2C_CR1_SWRST); -} - -/** - * @brief Check if the I2C peripheral is under reset state or not. - * @rmtoll CR1 SWRST LL_I2C_IsResetEnabled - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsResetEnabled(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR1, I2C_CR1_SWRST) == (I2C_CR1_SWRST)); -} - -/** - * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. - * @note Usage in Slave or Master mode. - * @rmtoll CR1 ACK LL_I2C_AcknowledgeNextData - * @param I2Cx I2C Instance. - * @param TypeAcknowledge This parameter can be one of the following values: - * @arg @ref LL_I2C_ACK - * @arg @ref LL_I2C_NACK - * @retval None - */ -__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) -{ - MODIFY_REG(I2Cx->CR1, I2C_CR1_ACK, TypeAcknowledge); -} - -/** - * @brief Generate a START or RESTART condition - * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. - * This action has no effect when RELOAD is set. - * @rmtoll CR1 START LL_I2C_GenerateStartCondition - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_START); -} - -/** - * @brief Generate a STOP condition after the current byte transfer (master mode). - * @rmtoll CR1 STOP LL_I2C_GenerateStopCondition - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_STOP); -} - -/** - * @brief Enable bit POS (master/host mode). - * @note In that case, the ACK bit controls the (N)ACK of the next byte received or the PEC bit indicates that the next byte in shift register is a PEC. - * @rmtoll CR1 POS LL_I2C_EnableBitPOS - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableBitPOS(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_POS); -} - -/** - * @brief Disable bit POS (master/host mode). - * @note In that case, the ACK bit controls the (N)ACK of the current byte received or the PEC bit indicates that the current byte in shift register is a PEC. - * @rmtoll CR1 POS LL_I2C_DisableBitPOS - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableBitPOS(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR1, I2C_CR1_POS); -} - -/** - * @brief Check if bit POS is enabled or disabled. - * @rmtoll CR1 POS LL_I2C_IsEnabledBitPOS - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledBitPOS(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR1, I2C_CR1_POS) == (I2C_CR1_POS)); -} - -/** - * @brief Indicate the value of transfer direction. - * @note RESET: Bus is in read transfer (peripheral point of view). - * SET: Bus is in write transfer (peripheral point of view). - * @rmtoll SR2 TRA LL_I2C_GetTransferDirection - * @param I2Cx I2C Instance. - * @retval Returned value can be one of the following values: - * @arg @ref LL_I2C_DIRECTION_WRITE - * @arg @ref LL_I2C_DIRECTION_READ - */ -__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->SR2, I2C_SR2_TRA)); -} - -/** - * @brief Enable DMA last transfer. - * @note This action mean that next DMA EOT is the last transfer. - * @rmtoll CR2 LAST LL_I2C_EnableLastDMA - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableLastDMA(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR2, I2C_CR2_LAST); -} - -/** - * @brief Disable DMA last transfer. - * @note This action mean that next DMA EOT is not the last transfer. - * @rmtoll CR2 LAST LL_I2C_DisableLastDMA - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableLastDMA(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR2, I2C_CR2_LAST); -} - -/** - * @brief Check if DMA last transfer is enabled or disabled. - * @rmtoll CR2 LAST LL_I2C_IsEnabledLastDMA - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledLastDMA(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR2, I2C_CR2_LAST) == (I2C_CR2_LAST)); -} - -/** - * @brief Enable transfer or internal comparison of the SMBus Packet Error byte (transmission or reception mode). - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @note This feature is cleared by hardware when the PEC byte is transferred or compared, - * or by a START or STOP condition, it is also cleared by software. - * @rmtoll CR1 PEC LL_I2C_EnableSMBusPECCompare - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) -{ - SET_BIT(I2Cx->CR1, I2C_CR1_PEC); -} - -/** - * @brief Disable transfer or internal comparison of the SMBus Packet Error byte (transmission or reception mode). - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll CR1 PEC LL_I2C_DisableSMBusPECCompare - * @param I2Cx I2C Instance. - * @retval None - */ -__STATIC_INLINE void LL_I2C_DisableSMBusPECCompare(I2C_TypeDef *I2Cx) -{ - CLEAR_BIT(I2Cx->CR1, I2C_CR1_PEC); -} - -/** - * @brief Check if the SMBus Packet Error byte transfer or internal comparison is requested or not. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll CR1 PEC LL_I2C_IsEnabledSMBusPECCompare - * @param I2Cx I2C Instance. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(I2C_TypeDef *I2Cx) -{ - return (READ_BIT(I2Cx->CR1, I2C_CR1_PEC) == (I2C_CR1_PEC)); -} - -/** - * @brief Get the SMBus Packet Error byte calculated. - * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not - * SMBus feature is supported by the I2Cx Instance. - * @rmtoll SR2 PEC LL_I2C_GetSMBusPEC - * @param I2Cx I2C Instance. - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(I2C_TypeDef *I2Cx) -{ - return (uint32_t)(READ_BIT(I2Cx->SR2, I2C_SR2_PEC) >> I2C_SR2_PEC_Pos); -} - -/** - * @brief Read Receive Data register. - * @rmtoll DR DR LL_I2C_ReceiveData8 - * @param I2Cx I2C Instance. - * @retval Value between Min_Data=0x0 and Max_Data=0xFF - */ -__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(I2C_TypeDef *I2Cx) -{ - return (uint8_t)(READ_BIT(I2Cx->DR, I2C_DR_DR)); -} - -/** - * @brief Write in Transmit Data Register . - * @rmtoll DR DR LL_I2C_TransmitData8 - * @param I2Cx I2C Instance. - * @param Data Value between Min_Data=0x0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) -{ - MODIFY_REG(I2Cx->DR, I2C_DR_DR, Data); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct); -uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx); -void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); - - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* I2C1 || I2C2 || I2C3 */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_I2C_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h deleted file mode 100644 index ea23dc5..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h +++ /dev/null @@ -1,985 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_pwr.h - * @author MCD Application Team - * @brief Header file of PWR LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_PWR_H -#define __STM32F4xx_LL_PWR_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(PWR) - -/** @defgroup PWR_LL PWR - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines - * @brief Flags defines which can be used with LL_PWR_WriteReg function - * @{ - */ -#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */ -#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_PWR_ReadReg function - * @{ - */ -#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */ -#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */ -#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */ -#define LL_PWR_CSR_VOS PWR_CSR_VOSRDY /*!< Voltage scaling select flag */ -#if defined(PWR_CSR_EWUP) -#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP /*!< Enable WKUP pin */ -#elif defined(PWR_CSR_EWUP1) -#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */ -#endif /* PWR_CSR_EWUP */ -#if defined(PWR_CSR_EWUP2) -#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */ -#endif /* PWR_CSR_EWUP2 */ -#if defined(PWR_CSR_EWUP3) -#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */ -#endif /* PWR_CSR_EWUP3 */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_REGU_VOLTAGE Regulator Voltage - * @{ - */ -#if defined(PWR_CR_VOS_0) -#define LL_PWR_REGU_VOLTAGE_SCALE3 (PWR_CR_VOS_0) -#define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR_VOS_1) -#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS_0 | PWR_CR_VOS_1) /* The SCALE1 is not available for STM32F401xx devices */ -#else -#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS) -#define LL_PWR_REGU_VOLTAGE_SCALE2 0x00000000U -#endif /* PWR_CR_VOS_0 */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_MODE_PWR Mode Power - * @{ - */ -#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) -#define LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (PWR_CR_MRUDS | PWR_CR_FPDS) /*!< Enter Stop mode (with main Regulator in under-drive mode) when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_FPDS) /*!< Enter Stop mode (with low power Regulator in under-drive mode) when the CPU enters deepsleep */ -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -#if defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) -#define LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (PWR_CR_MRLVDS | PWR_CR_FPDS) /*!< Enter Stop mode (with main Regulator in Deep Sleep mode) when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (PWR_CR_LPDS | PWR_CR_LPLVDS | PWR_CR_FPDS) /*!< Enter Stop mode (with low power Regulator in Deep Sleep mode) when the CPU enters deepsleep */ -#endif /* PWR_CR_MRLVDS && PWR_CR_LPLVDS && PWR_CR_FPDS */ -#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode - * @{ - */ -#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ -#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level - * @{ - */ -#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 2.2 V */ -#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.3 V */ -#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.4 V */ -#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */ -#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.6 V */ -#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.7 V */ -#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 2.8 V */ -#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold detected by PVD 2.9 V */ -/** - * @} - */ -/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins - * @{ - */ -#if defined(PWR_CSR_EWUP) -#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP) /*!< WKUP pin : PA0 */ -#endif /* PWR_CSR_EWUP */ -#if defined(PWR_CSR_EWUP1) -#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */ -#endif /* PWR_CSR_EWUP1 */ -#if defined(PWR_CSR_EWUP2) -#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC0 or PC13 according to device */ -#endif /* PWR_CSR_EWUP2 */ -#if defined(PWR_CSR_EWUP3) -#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PC1 */ -#endif /* PWR_CSR_EWUP3 */ -/** - * @} - */ - -/** - * @} - */ - - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros - * @{ - */ - -/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in PWR register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) - -/** - * @brief Read a value in PWR register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @defgroup PWR_LL_EF_Configuration Configuration - * @{ - */ -#if defined(PWR_CR_FISSR) -/** - * @brief Enable FLASH interface STOP while system Run is ON - * @rmtoll CR FISSR LL_PWR_EnableFLASHInterfaceSTOP - * @note This mode is enabled only with STOP low power mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFLASHInterfaceSTOP(void) -{ - SET_BIT(PWR->CR, PWR_CR_FISSR); -} - -/** - * @brief Disable FLASH Interface STOP while system Run is ON - * @rmtoll CR FISSR LL_PWR_DisableFLASHInterfaceSTOP - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFLASHInterfaceSTOP(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FISSR); -} - -/** - * @brief Check if FLASH Interface STOP while system Run feature is enabled - * @rmtoll CR FISSR LL_PWR_IsEnabledFLASHInterfaceSTOP - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFLASHInterfaceSTOP(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FISSR) == (PWR_CR_FISSR)); -} -#endif /* PWR_CR_FISSR */ - -#if defined(PWR_CR_FMSSR) -/** - * @brief Enable FLASH Memory STOP while system Run is ON - * @rmtoll CR FMSSR LL_PWR_EnableFLASHMemorySTOP - * @note This mode is enabled only with STOP low power mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFLASHMemorySTOP(void) -{ - SET_BIT(PWR->CR, PWR_CR_FMSSR); -} - -/** - * @brief Disable FLASH Memory STOP while system Run is ON - * @rmtoll CR FMSSR LL_PWR_DisableFLASHMemorySTOP - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFLASHMemorySTOP(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FMSSR); -} - -/** - * @brief Check if FLASH Memory STOP while system Run feature is enabled - * @rmtoll CR FMSSR LL_PWR_IsEnabledFLASHMemorySTOP - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFLASHMemorySTOP(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FMSSR) == (PWR_CR_FMSSR)); -} -#endif /* PWR_CR_FMSSR */ -#if defined(PWR_CR_UDEN) -/** - * @brief Enable Under Drive Mode - * @rmtoll CR UDEN LL_PWR_EnableUnderDriveMode - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main Regulator or the low power Regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage Regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableUnderDriveMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_UDEN); -} - -/** - * @brief Disable Under Drive Mode - * @rmtoll CR UDEN LL_PWR_DisableUnderDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableUnderDriveMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_UDEN); -} - -/** - * @brief Check if Under Drive Mode is enabled - * @rmtoll CR UDEN LL_PWR_IsEnabledUnderDriveMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledUnderDriveMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_UDEN) == (PWR_CR_UDEN)); -} -#endif /* PWR_CR_UDEN */ - -#if defined(PWR_CR_ODSWEN) -/** - * @brief Enable Over drive switching - * @rmtoll CR ODSWEN LL_PWR_EnableOverDriveSwitching - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableOverDriveSwitching(void) -{ - SET_BIT(PWR->CR, PWR_CR_ODSWEN); -} - -/** - * @brief Disable Over drive switching - * @rmtoll CR ODSWEN LL_PWR_DisableOverDriveSwitching - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableOverDriveSwitching(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_ODSWEN); -} - -/** - * @brief Check if Over drive switching is enabled - * @rmtoll CR ODSWEN LL_PWR_IsEnabledOverDriveSwitching - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveSwitching(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_ODSWEN) == (PWR_CR_ODSWEN)); -} -#endif /* PWR_CR_ODSWEN */ -#if defined(PWR_CR_ODEN) -/** - * @brief Enable Over drive Mode - * @rmtoll CR ODEN LL_PWR_EnableOverDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableOverDriveMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_ODEN); -} - -/** - * @brief Disable Over drive Mode - * @rmtoll CR ODEN LL_PWR_DisableOverDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableOverDriveMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_ODEN); -} - -/** - * @brief Check if Over drive switching is enabled - * @rmtoll CR ODEN LL_PWR_IsEnabledOverDriveMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_ODEN) == (PWR_CR_ODEN)); -} -#endif /* PWR_CR_ODEN */ -#if defined(PWR_CR_MRUDS) -/** - * @brief Enable Main Regulator in deepsleep under-drive Mode - * @rmtoll CR MRUDS LL_PWR_EnableMainRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableMainRegulatorDeepSleepUDMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_MRUDS); -} - -/** - * @brief Disable Main Regulator in deepsleep under-drive Mode - * @rmtoll CR MRUDS LL_PWR_DisableMainRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableMainRegulatorDeepSleepUDMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_MRUDS); -} - -/** - * @brief Check if Main Regulator in deepsleep under-drive Mode is enabled - * @rmtoll CR MRUDS LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_MRUDS) == (PWR_CR_MRUDS)); -} -#endif /* PWR_CR_MRUDS */ - -#if defined(PWR_CR_LPUDS) -/** - * @brief Enable Low Power Regulator in deepsleep under-drive Mode - * @rmtoll CR LPUDS LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_LPUDS); -} - -/** - * @brief Disable Low Power Regulator in deepsleep under-drive Mode - * @rmtoll CR LPUDS LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_LPUDS); -} - -/** - * @brief Check if Low Power Regulator in deepsleep under-drive Mode is enabled - * @rmtoll CR LPUDS LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_LPUDS) == (PWR_CR_LPUDS)); -} -#endif /* PWR_CR_LPUDS */ - -#if defined(PWR_CR_MRLVDS) -/** - * @brief Enable Main Regulator low voltage Mode - * @rmtoll CR MRLVDS LL_PWR_EnableMainRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableMainRegulatorLowVoltageMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_MRLVDS); -} - -/** - * @brief Disable Main Regulator low voltage Mode - * @rmtoll CR MRLVDS LL_PWR_DisableMainRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableMainRegulatorLowVoltageMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_MRLVDS); -} - -/** - * @brief Check if Main Regulator low voltage Mode is enabled - * @rmtoll CR MRLVDS LL_PWR_IsEnabledMainRegulatorLowVoltageMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorLowVoltageMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_MRLVDS) == (PWR_CR_MRLVDS)); -} -#endif /* PWR_CR_MRLVDS */ - -#if defined(PWR_CR_LPLVDS) -/** - * @brief Enable Low Power Regulator low voltage Mode - * @rmtoll CR LPLVDS LL_PWR_EnableLowPowerRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorLowVoltageMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_LPLVDS); -} - -/** - * @brief Disable Low Power Regulator low voltage Mode - * @rmtoll CR LPLVDS LL_PWR_DisableLowPowerRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorLowVoltageMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_LPLVDS); -} - -/** - * @brief Check if Low Power Regulator low voltage Mode is enabled - * @rmtoll CR LPLVDS LL_PWR_IsEnabledLowPowerRegulatorLowVoltageMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorLowVoltageMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_LPLVDS) == (PWR_CR_LPLVDS)); -} -#endif /* PWR_CR_LPLVDS */ -/** - * @brief Set the main internal Regulator output voltage - * @rmtoll CR VOS LL_PWR_SetRegulVoltageScaling - * @param VoltageScaling This parameter can be one of the following values: - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 (*) - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 - * (*) LL_PWR_REGU_VOLTAGE_SCALE1 is not available for STM32F401xx devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) -{ - MODIFY_REG(PWR->CR, PWR_CR_VOS, VoltageScaling); -} - -/** - * @brief Get the main internal Regulator output voltage - * @rmtoll CR VOS LL_PWR_GetRegulVoltageScaling - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 (*) - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 - * (*) LL_PWR_REGU_VOLTAGE_SCALE1 is not available for STM32F401xx devices - */ -__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_VOS)); -} -/** - * @brief Enable the Flash Power Down in Stop Mode - * @rmtoll CR FPDS LL_PWR_EnableFlashPowerDown - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void) -{ - SET_BIT(PWR->CR, PWR_CR_FPDS); -} - -/** - * @brief Disable the Flash Power Down in Stop Mode - * @rmtoll CR FPDS LL_PWR_DisableFlashPowerDown - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FPDS); -} - -/** - * @brief Check if the Flash Power Down in Stop Mode is enabled - * @rmtoll CR FPDS LL_PWR_IsEnabledFlashPowerDown - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FPDS) == (PWR_CR_FPDS)); -} - -/** - * @brief Enable access to the backup domain - * @rmtoll CR DBP LL_PWR_EnableBkUpAccess - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) -{ - SET_BIT(PWR->CR, PWR_CR_DBP); -} - -/** - * @brief Disable access to the backup domain - * @rmtoll CR DBP LL_PWR_DisableBkUpAccess - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_DBP); -} - -/** - * @brief Check if the backup domain is enabled - * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP)); -} -/** - * @brief Enable the backup Regulator - * @rmtoll CSR BRE LL_PWR_EnableBkUpRegulator - * @note The BRE bit of the PWR_CSR register is protected against parasitic write access. - * The LL_PWR_EnableBkUpAccess() must be called before using this API. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void) -{ - SET_BIT(PWR->CSR, PWR_CSR_BRE); -} - -/** - * @brief Disable the backup Regulator - * @rmtoll CSR BRE LL_PWR_DisableBkUpRegulator - * @note The BRE bit of the PWR_CSR register is protected against parasitic write access. - * The LL_PWR_EnableBkUpAccess() must be called before using this API. - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void) -{ - CLEAR_BIT(PWR->CSR, PWR_CSR_BRE); -} - -/** - * @brief Check if the backup Regulator is enabled - * @rmtoll CSR BRE LL_PWR_IsEnabledBkUpRegulator - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_BRE) == (PWR_CSR_BRE)); -} - -/** - * @brief Set voltage Regulator mode during deep sleep mode - * @rmtoll CR LPDS LL_PWR_SetRegulModeDS - * @param RegulMode This parameter can be one of the following values: - * @arg @ref LL_PWR_REGU_DSMODE_MAIN - * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) -{ - MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode); -} - -/** - * @brief Get voltage Regulator mode during deep sleep mode - * @rmtoll CR LPDS LL_PWR_GetRegulModeDS - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_REGU_DSMODE_MAIN - * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER - */ -__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS)); -} - -/** - * @brief Set Power Down mode when CPU enters deepsleep - * @rmtoll CR PDDS LL_PWR_SetPowerMode\n - * @rmtoll CR MRUDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPUDS LL_PWR_SetPowerMode\n - * @rmtoll CR FPDS LL_PWR_SetPowerMode\n - * @rmtoll CR MRLVDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPlVDS LL_PWR_SetPowerMode\n - * @rmtoll CR FPDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPDS LL_PWR_SetPowerMode - * @param PDMode This parameter can be one of the following values: - * @arg @ref LL_PWR_MODE_STOP_MAINREGU - * @arg @ref LL_PWR_MODE_STOP_LPREGU - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (*) - * - * (*) not available on all devices - * @arg @ref LL_PWR_MODE_STANDBY - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode) -{ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS), PDMode); -#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS), PDMode); -#else - MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode); -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -} - -/** - * @brief Get Power Down mode when CPU enters deepsleep - * @rmtoll CR PDDS LL_PWR_GetPowerMode\n - * @rmtoll CR MRUDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPUDS LL_PWR_GetPowerMode\n - * @rmtoll CR FPDS LL_PWR_GetPowerMode\n - * @rmtoll CR MRLVDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPLVDS LL_PWR_GetPowerMode\n - * @rmtoll CR FPDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPDS LL_PWR_GetPowerMode - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_MODE_STOP_MAINREGU - * @arg @ref LL_PWR_MODE_STOP_LPREGU - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (*) - * - * (*) not available on all devices - * @arg @ref LL_PWR_MODE_STANDBY - */ -__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) -{ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS))); -#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS))); -#else - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS))); -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -} - -/** - * @brief Configure the voltage threshold detected by the Power Voltage Detector - * @rmtoll CR PLS LL_PWR_SetPVDLevel - * @param PVDLevel This parameter can be one of the following values: - * @arg @ref LL_PWR_PVDLEVEL_0 - * @arg @ref LL_PWR_PVDLEVEL_1 - * @arg @ref LL_PWR_PVDLEVEL_2 - * @arg @ref LL_PWR_PVDLEVEL_3 - * @arg @ref LL_PWR_PVDLEVEL_4 - * @arg @ref LL_PWR_PVDLEVEL_5 - * @arg @ref LL_PWR_PVDLEVEL_6 - * @arg @ref LL_PWR_PVDLEVEL_7 - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) -{ - MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel); -} - -/** - * @brief Get the voltage threshold detection - * @rmtoll CR PLS LL_PWR_GetPVDLevel - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_PVDLEVEL_0 - * @arg @ref LL_PWR_PVDLEVEL_1 - * @arg @ref LL_PWR_PVDLEVEL_2 - * @arg @ref LL_PWR_PVDLEVEL_3 - * @arg @ref LL_PWR_PVDLEVEL_4 - * @arg @ref LL_PWR_PVDLEVEL_5 - * @arg @ref LL_PWR_PVDLEVEL_6 - * @arg @ref LL_PWR_PVDLEVEL_7 - */ -__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS)); -} - -/** - * @brief Enable Power Voltage Detector - * @rmtoll CR PVDE LL_PWR_EnablePVD - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnablePVD(void) -{ - SET_BIT(PWR->CR, PWR_CR_PVDE); -} - -/** - * @brief Disable Power Voltage Detector - * @rmtoll CR PVDE LL_PWR_DisablePVD - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisablePVD(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_PVDE); -} - -/** - * @brief Check if Power Voltage Detector is enabled - * @rmtoll CR PVDE LL_PWR_IsEnabledPVD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE)); -} - -/** - * @brief Enable the WakeUp PINx functionality - * @rmtoll CSR EWUP LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) -{ - SET_BIT(PWR->CSR, WakeUpPin); -} - -/** - * @brief Disable the WakeUp PINx functionality - * @rmtoll CSR EWUP LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) -{ - CLEAR_BIT(PWR->CSR, WakeUpPin); -} - -/** - * @brief Check if the WakeUp PINx functionality is enabled - * @rmtoll CSR EWUP LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) -{ - return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin)); -} - - -/** - * @} - */ - -/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management - * @{ - */ - -/** - * @brief Get Wake-up Flag - * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF)); -} - -/** - * @brief Get Standby Flag - * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF)); -} - -/** - * @brief Get Backup Regulator ready Flag - * @rmtoll CSR BRR LL_PWR_IsActiveFlag_BRR - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_BRR) == (PWR_CSR_BRR)); -} -/** - * @brief Indicate whether VDD voltage is below the selected PVD threshold - * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO)); -} - -/** - * @brief Indicate whether the Regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level - * @rmtoll CSR VOS LL_PWR_IsActiveFlag_VOS - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) -{ - return (READ_BIT(PWR->CSR, LL_PWR_CSR_VOS) == (LL_PWR_CSR_VOS)); -} -#if defined(PWR_CR_ODEN) -/** - * @brief Indicate whether the Over-Drive mode is ready or not - * @rmtoll CSR ODRDY LL_PWR_IsActiveFlag_OD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_OD(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_ODRDY) == (PWR_CSR_ODRDY)); -} -#endif /* PWR_CR_ODEN */ - -#if defined(PWR_CR_ODSWEN) -/** - * @brief Indicate whether the Over-Drive mode switching is ready or not - * @rmtoll CSR ODSWRDY LL_PWR_IsActiveFlag_ODSW - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ODSW(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_ODSWRDY) == (PWR_CSR_ODSWRDY)); -} -#endif /* PWR_CR_ODSWEN */ - -#if defined(PWR_CR_UDEN) -/** - * @brief Indicate whether the Under-Drive mode is ready or not - * @rmtoll CSR UDRDY LL_PWR_IsActiveFlag_UD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_UD(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_UDRDY) == (PWR_CSR_UDRDY)); -} -#endif /* PWR_CR_UDEN */ -/** - * @brief Clear Standby Flag - * @rmtoll CR CSBF LL_PWR_ClearFlag_SB - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) -{ - SET_BIT(PWR->CR, PWR_CR_CSBF); -} - -/** - * @brief Clear Wake-up Flags - * @rmtoll CR CWUF LL_PWR_ClearFlag_WU - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) -{ - SET_BIT(PWR->CR, PWR_CR_CWUF); -} -#if defined(PWR_CSR_UDRDY) -/** - * @brief Clear Under-Drive ready Flag - * @rmtoll CSR UDRDY LL_PWR_ClearFlag_UD - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_UD(void) -{ - WRITE_REG(PWR->CSR, PWR_CSR_UDRDY); -} -#endif /* PWR_CSR_UDRDY */ - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup PWR_LL_EF_Init De-initialization function - * @{ - */ -ErrorStatus LL_PWR_DeInit(void); -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(PWR) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_PWR_H */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h deleted file mode 100644 index 1df1b58..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h +++ /dev/null @@ -1,7096 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rcc.h - * @author MCD Application Team - * @brief Header file of RCC LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_RCC_H -#define __STM32F4xx_LL_RCC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @defgroup RCC_LL RCC - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RCC_LL_Private_Variables RCC Private Variables - * @{ - */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -static const uint8_t aRCC_PLLSAIDIVRPrescTable[4] = {2, 4, 8, 16}; -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_Private_Macros RCC Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_Exported_Types RCC Exported Types - * @{ - */ - -/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure - * @{ - */ - -/** - * @brief RCC Clocks Frequency Structure - */ -typedef struct -{ - uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ - uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ - uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ - uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */ -} LL_RCC_ClocksTypeDef; - -/** - * @} - */ - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation - * @brief Defines used to adapt values of different oscillators - * @note These values could be modified in the user environment according to - * HW set-up. - * @{ - */ -#if !defined (HSE_VALUE) -#define HSE_VALUE 25000000U /*!< Value of the HSE oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) -#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */ -#endif /* HSI_VALUE */ - -#if !defined (LSE_VALUE) -#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSI_VALUE) -#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ -#endif /* LSI_VALUE */ - -#if !defined (EXTERNAL_CLOCK_VALUE) -#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */ -#endif /* EXTERNAL_CLOCK_VALUE */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines - * @brief Flags defines which can be used with LL_RCC_WriteReg function - * @{ - */ -#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */ -#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */ -#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */ -#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */ -#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYC RCC_CIR_PLLI2SRDYC /*!< PLLI2S Ready Interrupt Clear */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYC RCC_CIR_PLLSAIRDYC /*!< PLLSAI Ready Interrupt Clear */ -#endif /* RCC_PLLSAI_SUPPORT */ -#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_RCC_ReadReg function - * @{ - */ -#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */ -#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */ -#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */ -#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */ -#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYF RCC_CIR_PLLI2SRDYF /*!< PLLI2S Ready Interrupt flag */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYF RCC_CIR_PLLSAIRDYF /*!< PLLSAI Ready Interrupt flag */ -#endif /* RCC_PLLSAI_SUPPORT */ -#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */ -#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ -#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ -#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */ -#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ -#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ -#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ -#if defined(RCC_CSR_BORRSTF) -#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */ -#endif /* RCC_CSR_BORRSTF */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions - * @{ - */ -#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */ -#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */ -#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */ -#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */ -#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYIE RCC_CIR_PLLI2SRDYIE /*!< PLLI2S Ready Interrupt Enable */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYIE RCC_CIR_PLLSAIRDYIE /*!< PLLSAI Ready Interrupt Enable */ -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch - * @{ - */ -#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ -#if defined(RCC_CFGR_SW_PLLR) -#define LL_RCC_SYS_CLKSOURCE_PLLR RCC_CFGR_SW_PLLR /*!< PLLR selection as system clock */ -#endif /* RCC_CFGR_SW_PLLR */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status - * @{ - */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -#if defined(RCC_PLLR_SYSCLK_SUPPORT) -#define LL_RCC_SYS_CLKSOURCE_STATUS_PLLR RCC_CFGR_SWS_PLLR /*!< PLLR used as system clock */ -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler - * @{ - */ -#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ -#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ -#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ -#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ -#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ -#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ -#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ -#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ -#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) - * @{ - */ -#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ -#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ -#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ -#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ -#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2) - * @{ - */ -#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */ -#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */ -#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */ -#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */ -#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection - * @{ - */ -#define LL_RCC_MCO1SOURCE_HSI (uint32_t)(RCC_CFGR_MCO1|0x00000000U) /*!< HSI selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_LSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_0 >> 16U)) /*!< LSE selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_HSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_1 >> 16U)) /*!< HSE selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO1|((RCC_CFGR_MCO1_1|RCC_CFGR_MCO1_0) >> 16U)) /*!< PLLCLK selection as MCO1 source */ -#if defined(RCC_CFGR_MCO2) -#define LL_RCC_MCO2SOURCE_SYSCLK (uint32_t)(RCC_CFGR_MCO2|0x00000000U) /*!< SYSCLK selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_PLLI2S (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_0 >> 16U)) /*!< PLLI2S selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_HSE (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_1 >> 16U)) /*!< HSE selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO2|((RCC_CFGR_MCO2_1|RCC_CFGR_MCO2_0) >> 16U)) /*!< PLLCLK selection as MCO2 source */ -#endif /* RCC_CFGR_MCO2 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler - * @{ - */ -#define LL_RCC_MCO1_DIV_1 (uint32_t)(RCC_CFGR_MCO1PRE|0x00000000U) /*!< MCO1 not divided */ -#define LL_RCC_MCO1_DIV_2 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE_2 >> 16U)) /*!< MCO1 divided by 2 */ -#define LL_RCC_MCO1_DIV_3 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_0) >> 16U)) /*!< MCO1 divided by 3 */ -#define LL_RCC_MCO1_DIV_4 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_1) >> 16U)) /*!< MCO1 divided by 4 */ -#define LL_RCC_MCO1_DIV_5 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE >> 16U)) /*!< MCO1 divided by 5 */ -#if defined(RCC_CFGR_MCO2PRE) -#define LL_RCC_MCO2_DIV_1 (uint32_t)(RCC_CFGR_MCO2PRE|0x00000000U) /*!< MCO2 not divided */ -#define LL_RCC_MCO2_DIV_2 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE_2 >> 16U)) /*!< MCO2 divided by 2 */ -#define LL_RCC_MCO2_DIV_3 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_0) >> 16U)) /*!< MCO2 divided by 3 */ -#define LL_RCC_MCO2_DIV_4 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_1) >> 16U)) /*!< MCO2 divided by 4 */ -#define LL_RCC_MCO2_DIV_5 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE >> 16U)) /*!< MCO2 divided by 5 */ -#endif /* RCC_CFGR_MCO2PRE */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock - * @{ - */ -#define LL_RCC_RTC_NOCLOCK 0x00000000U /*!< HSE not divided */ -#define LL_RCC_RTC_HSE_DIV_2 RCC_CFGR_RTCPRE_1 /*!< HSE clock divided by 2 */ -#define LL_RCC_RTC_HSE_DIV_3 (RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 3 */ -#define LL_RCC_RTC_HSE_DIV_4 RCC_CFGR_RTCPRE_2 /*!< HSE clock divided by 4 */ -#define LL_RCC_RTC_HSE_DIV_5 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 5 */ -#define LL_RCC_RTC_HSE_DIV_6 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 6 */ -#define LL_RCC_RTC_HSE_DIV_7 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 7 */ -#define LL_RCC_RTC_HSE_DIV_8 RCC_CFGR_RTCPRE_3 /*!< HSE clock divided by 8 */ -#define LL_RCC_RTC_HSE_DIV_9 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 9 */ -#define LL_RCC_RTC_HSE_DIV_10 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 10 */ -#define LL_RCC_RTC_HSE_DIV_11 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 11 */ -#define LL_RCC_RTC_HSE_DIV_12 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 12 */ -#define LL_RCC_RTC_HSE_DIV_13 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 13 */ -#define LL_RCC_RTC_HSE_DIV_14 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 14 */ -#define LL_RCC_RTC_HSE_DIV_15 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 15 */ -#define LL_RCC_RTC_HSE_DIV_16 RCC_CFGR_RTCPRE_4 /*!< HSE clock divided by 16 */ -#define LL_RCC_RTC_HSE_DIV_17 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 17 */ -#define LL_RCC_RTC_HSE_DIV_18 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 18 */ -#define LL_RCC_RTC_HSE_DIV_19 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 19 */ -#define LL_RCC_RTC_HSE_DIV_20 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 20 */ -#define LL_RCC_RTC_HSE_DIV_21 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 21 */ -#define LL_RCC_RTC_HSE_DIV_22 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 22 */ -#define LL_RCC_RTC_HSE_DIV_23 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 23 */ -#define LL_RCC_RTC_HSE_DIV_24 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) /*!< HSE clock divided by 24 */ -#define LL_RCC_RTC_HSE_DIV_25 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 25 */ -#define LL_RCC_RTC_HSE_DIV_26 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 26 */ -#define LL_RCC_RTC_HSE_DIV_27 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 27 */ -#define LL_RCC_RTC_HSE_DIV_28 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 28 */ -#define LL_RCC_RTC_HSE_DIV_29 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 29 */ -#define LL_RCC_RTC_HSE_DIV_30 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 30 */ -#define LL_RCC_RTC_HSE_DIV_31 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 31 */ -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency - * @{ - */ -#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ -#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -#if defined(FMPI2C1) -/** @defgroup RCC_LL_EC_FMPI2C1_CLKSOURCE Peripheral FMPI2C clock source selection - * @{ - */ -#define LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as FMPI2C1 clock source */ -#define LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK RCC_DCKCFGR2_FMPI2C1SEL_0 /*!< SYSCLK clock used as FMPI2C1 clock source */ -#define LL_RCC_FMPI2C1_CLKSOURCE_HSI RCC_DCKCFGR2_FMPI2C1SEL_1 /*!< HSI clock used as FMPI2C1 clock source */ -/** - * @} - */ -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection - * @{ - */ -#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_0 /*!< LSI oscillator clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_1 /*!< HSI oscillator clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_LSE (uint32_t)(RCC_DCKCFGR2_LPTIM1SEL_1 | RCC_DCKCFGR2_LPTIM1SEL_0) /*!< LSE oscillator clock used as LPTIM1 clock */ -/** - * @} - */ -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection - * @{ - */ -#if defined(RCC_DCKCFGR_SAI1SRC) -#define LL_RCC_SAI1_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1SRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC_1 >> 16)) /*!< PLL clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC >> 16)) /*!< External pin clock used as SAI1 clock source */ -#endif /* RCC_DCKCFGR_SAI1SRC */ -#if defined(RCC_DCKCFGR_SAI2SRC) -#define LL_RCC_SAI2_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI2SRC | 0x00000000U) /*!< PLLSAI clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC_0 >> 16)) /*!< PLLI2S clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC_1 >> 16)) /*!< PLL clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC >> 16)) /*!< PLL Main clock used as SAI2 clock source */ -#endif /* RCC_DCKCFGR_SAI2SRC */ -#if defined(RCC_DCKCFGR_SAI1ASRC) -#if defined(RCC_SAI1A_PLLSOURCE_SUPPORT) -#define LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1ASRC | 0x00000000U) /*!< PLLI2S clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_0 >> 16)) /*!< External pin used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_1 >> 16)) /*!< PLL clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC >> 16)) /*!< PLL Main clock used as SAI1 block A clock source */ -#else -#define LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1ASRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_1 >> 16)) /*!< External pin clock used as SAI1 block A clock source */ -#endif /* RCC_SAI1A_PLLSOURCE_SUPPORT */ -#endif /* RCC_DCKCFGR_SAI1ASRC */ -#if defined(RCC_DCKCFGR_SAI1BSRC) -#if defined(RCC_SAI1B_PLLSOURCE_SUPPORT) -#define LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1BSRC | 0x00000000U) /*!< PLLI2S clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_0 >> 16)) /*!< External pin used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_1 >> 16)) /*!< PLL clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC >> 16)) /*!< PLL Main clock used as SAI1 block B clock source */ -#else -#define LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1BSRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_1 >> 16)) /*!< External pin clock used as SAI1 block B clock source */ -#endif /* RCC_SAI1B_PLLSOURCE_SUPPORT */ -#endif /* RCC_DCKCFGR_SAI1BSRC */ -/** - * @} - */ -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** @defgroup RCC_LL_EC_SDIOx_CLKSOURCE Peripheral SDIO clock source selection - * @{ - */ -#define LL_RCC_SDIO_CLKSOURCE_PLL48CLK 0x00000000U /*!< PLL 48M domain clock used as SDIO clock */ -#if defined(RCC_DCKCFGR_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE_SYSCLK RCC_DCKCFGR_SDIOSEL /*!< System clock clock used as SDIO clock */ -#else -#define LL_RCC_SDIO_CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDIOSEL /*!< System clock clock used as SDIO clock */ -#endif /* RCC_DCKCFGR_SDIOSEL */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(DSI) -/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection - * @{ - */ -#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */ -#define LL_RCC_DSI_CLKSOURCE_PLL RCC_DCKCFGR_DSISEL /*!< PLL clock used as DSI byte lane clock source */ -/** - * @} - */ -#endif /* DSI */ - -#if defined(CEC) -/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection - * @{ - */ -#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as CEC clock */ -#define LL_RCC_CEC_CLKSOURCE_LSE RCC_DCKCFGR2_CECSEL /*!< LSE oscillator clock used as CEC clock */ -/** - * @} - */ -#endif /* CEC */ - -/** @defgroup RCC_LL_EC_I2S1_CLKSOURCE Peripheral I2S clock source selection - * @{ - */ -#if defined(RCC_CFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE_PLLI2S 0x00000000U /*!< I2S oscillator clock used as I2S1 clock */ -#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CFGR_I2SSRC /*!< External pin clock used as I2S1 clock */ -#endif /* RCC_CFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2SSRC | 0x00000000U) /*!< PLL clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2SSRC | (RCC_DCKCFGR_I2SSRC_0 >> 16)) /*!< External pin used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2SSRC | (RCC_DCKCFGR_I2SSRC_1 >> 16)) /*!< PLL Main clock used as I2S1 clock source */ -#endif /* RCC_DCKCFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2S1SRC) -#define LL_RCC_I2S1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_I2S1SRC | 0x00000000U) /*!< PLLI2S clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC_0 >> 16)) /*!< External pin used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC_1 >> 16)) /*!< PLL clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC >> 16)) /*!< PLL Main clock used as I2S1 clock source */ -#endif /* RCC_DCKCFGR_I2S1SRC */ -#if defined(RCC_DCKCFGR_I2S2SRC) -#define LL_RCC_I2S2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_I2S2SRC | 0x00000000U) /*!< PLLI2S clock used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC_0 >> 16)) /*!< External pin used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC_1 >> 16)) /*!< PLL clock used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC >> 16)) /*!< PLL Main clock used as I2S2 clock source */ -#endif /* RCC_DCKCFGR_I2S2SRC */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** @defgroup RCC_LL_EC_CK48M_CLKSOURCE Peripheral 48Mhz domain clock source selection - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */ -#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -#if defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_CK48M_CLKSOURCE_PLLI2S RCC_DCKCFGR2_CK48MSEL /*!< PLLI2S oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ - -#if defined(RNG) -/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection - * @{ - */ -#define LL_RCC_RNG_CLKSOURCE_PLL LL_RCC_CK48M_CLKSOURCE_PLL /*!< PLL clock used as RNG clock source */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_RNG_CLKSOURCE_PLLSAI LL_RCC_CK48M_CLKSOURCE_PLLSAI /*!< PLLSAI clock used as RNG clock source */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_RNG_CLKSOURCE_PLLI2S LL_RCC_CK48M_CLKSOURCE_PLLI2S /*!< PLLI2S clock used as RNG clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -/** - * @} - */ -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection - * @{ - */ -#define LL_RCC_USB_CLKSOURCE_PLL LL_RCC_CK48M_CLKSOURCE_PLL /*!< PLL clock used as USB clock source */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_USB_CLKSOURCE_PLLSAI LL_RCC_CK48M_CLKSOURCE_PLLSAI /*!< PLLSAI clock used as USB clock source */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_USB_CLKSOURCE_PLLI2S LL_RCC_CK48M_CLKSOURCE_PLLI2S /*!< PLLI2S clock used as USB clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -/** - * @} - */ -#endif /* USB_OTG_FS || USB_OTG_HS */ - -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(DFSDM1_Channel0) || defined(DFSDM2_Channel0) -/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM Audio clock source selection - * @{ - */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 (uint32_t)(RCC_DCKCFGR_CKDFSDM1ASEL | 0x00000000U) /*!< I2S1 clock used as DFSDM1 Audio clock source */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 (uint32_t)(RCC_DCKCFGR_CKDFSDM1ASEL | (RCC_DCKCFGR_CKDFSDM1ASEL << 16)) /*!< I2S2 clock used as DFSDM1 Audio clock source */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (uint32_t)(RCC_DCKCFGR_CKDFSDM2ASEL | 0x00000000U) /*!< I2S1 clock used as DFSDM2 Audio clock source */ -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (uint32_t)(RCC_DCKCFGR_CKDFSDM2ASEL | (RCC_DCKCFGR_CKDFSDM2ASEL << 16)) /*!< I2S2 clock used as DFSDM2 Audio clock source */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM clock source selection - * @{ - */ -#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM1 clock */ -#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_DCKCFGR_CKDFSDM1SEL /*!< System clock used as DFSDM1 clock */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM2 clock */ -#define LL_RCC_DFSDM2_CLKSOURCE_SYSCLK RCC_DCKCFGR_CKDFSDM1SEL /*!< System clock used as DFSDM2 clock */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ -#endif /* DFSDM1_Channel0 || DFSDM2_Channel0 */ - -#if defined(FMPI2C1) -/** @defgroup RCC_LL_EC_FMPI2C1 Peripheral FMPI2C get clock source - * @{ - */ -#define LL_RCC_FMPI2C1_CLKSOURCE RCC_DCKCFGR2_FMPI2C1SEL /*!< FMPI2C1 Clock source selection */ -/** - * @} - */ -#endif /* FMPI2C1 */ - -#if defined(SPDIFRX) -/** @defgroup RCC_LL_EC_SPDIFRX_CLKSOURCE Peripheral SPDIFRX clock source selection - * @{ - */ -#define LL_RCC_SPDIFRX1_CLKSOURCE_PLL 0x00000000U /*!< PLL clock used as SPDIFRX clock source */ -#define LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S RCC_DCKCFGR2_SPDIFRXSEL /*!< PLLI2S clock used as SPDIFRX clock source */ -/** - * @} - */ -#endif /* SPDIFRX */ - -#if defined(LPTIM1) -/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source - * @{ - */ -#define LL_RCC_LPTIM1_CLKSOURCE RCC_DCKCFGR2_LPTIM1SEL /*!< LPTIM1 Clock source selection */ -/** - * @} - */ -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** @defgroup RCC_LL_EC_SAIx Peripheral SAI get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_SAI1ASRC) -#define LL_RCC_SAI1_A_CLKSOURCE RCC_DCKCFGR_SAI1ASRC /*!< SAI1 block A Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1ASRC */ -#if defined(RCC_DCKCFGR_SAI1BSRC) -#define LL_RCC_SAI1_B_CLKSOURCE RCC_DCKCFGR_SAI1BSRC /*!< SAI1 block B Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1BSRC */ -#if defined(RCC_DCKCFGR_SAI1SRC) -#define LL_RCC_SAI1_CLKSOURCE RCC_DCKCFGR_SAI1SRC /*!< SAI1 Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1SRC */ -#if defined(RCC_DCKCFGR_SAI2SRC) -#define LL_RCC_SAI2_CLKSOURCE RCC_DCKCFGR_SAI2SRC /*!< SAI2 Clock source selection */ -#endif /* RCC_DCKCFGR_SAI2SRC */ -/** - * @} - */ -#endif /* SAI1 */ - -#if defined(SDIO) -/** @defgroup RCC_LL_EC_SDIOx Peripheral SDIO get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE RCC_DCKCFGR_SDIOSEL /*!< SDIO Clock source selection */ -#elif defined(RCC_DCKCFGR2_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE RCC_DCKCFGR2_SDIOSEL /*!< SDIO Clock source selection */ -#else -#define LL_RCC_SDIO_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< SDIO Clock source selection */ -#endif -/** - * @} - */ -#endif /* SDIO */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** @defgroup RCC_LL_EC_CK48M Peripheral CK48M get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR_CK48MSEL /*!< CK48M Domain clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -#if defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< CK48M Domain clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(RNG) -/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_RNG_CLKSOURCE LL_RCC_CK48M_CLKSOURCE /*!< RNG Clock source selection */ -#else -#define LL_RCC_RNG_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< RNG Clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_USB_CLKSOURCE LL_RCC_CK48M_CLKSOURCE /*!< USB Clock source selection */ -#else -#define LL_RCC_USB_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< USB Clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ -#endif /* USB_OTG_FS || USB_OTG_HS */ - -#if defined(CEC) -/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source - * @{ - */ -#define LL_RCC_CEC_CLKSOURCE RCC_DCKCFGR2_CECSEL /*!< CEC Clock source selection */ -/** - * @} - */ -#endif /* CEC */ - -/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source - * @{ - */ -#if defined(RCC_CFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_CFGR_I2SSRC /*!< I2S1 Clock source selection */ -#endif /* RCC_CFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_DCKCFGR_I2SSRC /*!< I2S1 Clock source selection */ -#endif /* RCC_DCKCFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2S1SRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_DCKCFGR_I2S1SRC /*!< I2S1 Clock source selection */ -#endif /* RCC_DCKCFGR_I2S1SRC */ -#if defined(RCC_DCKCFGR_I2S2SRC) -#define LL_RCC_I2S2_CLKSOURCE RCC_DCKCFGR_I2S2SRC /*!< I2S2 Clock source selection */ -#endif /* RCC_DCKCFGR_I2S2SRC */ -/** - * @} - */ - -#if defined(DFSDM1_Channel0) || defined(DFSDM2_Channel0) -/** @defgroup RCC_LL_EC_DFSDM_AUDIO Peripheral DFSDM Audio get clock source - * @{ - */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_DCKCFGR_CKDFSDM1ASEL /*!< DFSDM1 Audio Clock source selection */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE RCC_DCKCFGR_CKDFSDM2ASEL /*!< DFSDM2 Audio Clock source selection */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_DFSDM Peripheral DFSDM get clock source - * @{ - */ -#define LL_RCC_DFSDM1_CLKSOURCE RCC_DCKCFGR_CKDFSDM1SEL /*!< DFSDM1 Clock source selection */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_CLKSOURCE RCC_DCKCFGR_CKDFSDM1SEL /*!< DFSDM2 Clock source selection */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ -#endif /* DFSDM1_Channel0 || DFSDM2_Channel0 */ - -#if defined(SPDIFRX) -/** @defgroup RCC_LL_EC_SPDIFRX Peripheral SPDIFRX get clock source - * @{ - */ -#define LL_RCC_SPDIFRX1_CLKSOURCE RCC_DCKCFGR2_SPDIFRXSEL /*!< SPDIFRX Clock source selection */ -/** - * @} - */ -#endif /* SPDIFRX */ - -#if defined(DSI) -/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source - * @{ - */ -#define LL_RCC_DSI_CLKSOURCE RCC_DCKCFGR_DSISEL /*!< DSI Clock source selection */ -/** - * @} - */ -#endif /* DSI */ - -#if defined(LTDC) -/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source - * @{ - */ -#define LL_RCC_LTDC_CLKSOURCE RCC_DCKCFGR_PLLSAIDIVR /*!< LTDC Clock source selection */ -/** - * @} - */ -#endif /* LTDC */ - - -/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection - * @{ - */ -#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_HSE RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by HSE prescaler used as RTC clock */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_TIMPRE) -/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection - * @{ - */ -#define LL_RCC_TIM_PRESCALER_TWICE 0x00000000U /*!< Timers clock to twice PCLK */ -#define LL_RCC_TIM_PRESCALER_FOUR_TIMES RCC_DCKCFGR_TIMPRE /*!< Timers clock to four time PCLK */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_TIMPRE */ - -/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLI2S and PLLSAI entry clock source - * @{ - */ -#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) -#define LL_RCC_PLLI2SSOURCE_PIN (RCC_PLLI2SCFGR_PLLI2SSRC | 0x80U) /*!< I2S External pin input clock selected as PLLI2S entry clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLM_DIV PLL, PLLI2S and PLLSAI division factor - * @{ - */ -#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 2 */ -#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 3 */ -#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 4 */ -#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 5 */ -#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 6 */ -#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 7 */ -#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 8 */ -#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 9 */ -#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 10 */ -#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 11 */ -#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 12 */ -#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 13 */ -#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 14 */ -#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 15 */ -#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 16 */ -#define LL_RCC_PLLM_DIV_17 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 17 */ -#define LL_RCC_PLLM_DIV_18 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 18 */ -#define LL_RCC_PLLM_DIV_19 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 19 */ -#define LL_RCC_PLLM_DIV_20 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 20 */ -#define LL_RCC_PLLM_DIV_21 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 21 */ -#define LL_RCC_PLLM_DIV_22 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 22 */ -#define LL_RCC_PLLM_DIV_23 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 23 */ -#define LL_RCC_PLLM_DIV_24 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 24 */ -#define LL_RCC_PLLM_DIV_25 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 25 */ -#define LL_RCC_PLLM_DIV_26 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 26 */ -#define LL_RCC_PLLM_DIV_27 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 27 */ -#define LL_RCC_PLLM_DIV_28 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 28 */ -#define LL_RCC_PLLM_DIV_29 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 29 */ -#define LL_RCC_PLLM_DIV_30 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 30 */ -#define LL_RCC_PLLM_DIV_31 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 31 */ -#define LL_RCC_PLLM_DIV_32 (RCC_PLLCFGR_PLLM_5) /*!< PLL, PLLI2S and PLLSAI division factor by 32 */ -#define LL_RCC_PLLM_DIV_33 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 33 */ -#define LL_RCC_PLLM_DIV_34 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 34 */ -#define LL_RCC_PLLM_DIV_35 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 35 */ -#define LL_RCC_PLLM_DIV_36 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 36 */ -#define LL_RCC_PLLM_DIV_37 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 37 */ -#define LL_RCC_PLLM_DIV_38 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 38 */ -#define LL_RCC_PLLM_DIV_39 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 39 */ -#define LL_RCC_PLLM_DIV_40 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 40 */ -#define LL_RCC_PLLM_DIV_41 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 41 */ -#define LL_RCC_PLLM_DIV_42 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 42 */ -#define LL_RCC_PLLM_DIV_43 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 43 */ -#define LL_RCC_PLLM_DIV_44 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 44 */ -#define LL_RCC_PLLM_DIV_45 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 45 */ -#define LL_RCC_PLLM_DIV_46 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 46 */ -#define LL_RCC_PLLM_DIV_47 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 47 */ -#define LL_RCC_PLLM_DIV_48 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 48 */ -#define LL_RCC_PLLM_DIV_49 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 49 */ -#define LL_RCC_PLLM_DIV_50 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 50 */ -#define LL_RCC_PLLM_DIV_51 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 51 */ -#define LL_RCC_PLLM_DIV_52 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 52 */ -#define LL_RCC_PLLM_DIV_53 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 53 */ -#define LL_RCC_PLLM_DIV_54 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 54 */ -#define LL_RCC_PLLM_DIV_55 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 55 */ -#define LL_RCC_PLLM_DIV_56 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 56 */ -#define LL_RCC_PLLM_DIV_57 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 57 */ -#define LL_RCC_PLLM_DIV_58 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 58 */ -#define LL_RCC_PLLM_DIV_59 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 59 */ -#define LL_RCC_PLLM_DIV_60 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 60 */ -#define LL_RCC_PLLM_DIV_61 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 61 */ -#define LL_RCC_PLLM_DIV_62 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 62 */ -#define LL_RCC_PLLM_DIV_63 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 63 */ -/** - * @} - */ - -#if defined(RCC_PLLCFGR_PLLR) -/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR) - * @{ - */ -#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */ -#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */ -#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */ -#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */ -#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */ -#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */ -/** - * @} - */ -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_DCKCFGR_PLLDIVR) -/** @defgroup RCC_LL_EC_PLLDIVR PLLDIVR division factor (PLLDIVR) - * @{ - */ -#define LL_RCC_PLLDIVR_DIV_1 (RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 1 */ -#define LL_RCC_PLLDIVR_DIV_2 (RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 2 */ -#define LL_RCC_PLLDIVR_DIV_3 (RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 3 */ -#define LL_RCC_PLLDIVR_DIV_4 (RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 4 */ -#define LL_RCC_PLLDIVR_DIV_5 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 5 */ -#define LL_RCC_PLLDIVR_DIV_6 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 6 */ -#define LL_RCC_PLLDIVR_DIV_7 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 7 */ -#define LL_RCC_PLLDIVR_DIV_8 (RCC_DCKCFGR_PLLDIVR_3) /*!< PLL division factor for PLLDIVR output by 8 */ -#define LL_RCC_PLLDIVR_DIV_9 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 9 */ -#define LL_RCC_PLLDIVR_DIV_10 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 10 */ -#define LL_RCC_PLLDIVR_DIV_11 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 11 */ -#define LL_RCC_PLLDIVR_DIV_12 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 12 */ -#define LL_RCC_PLLDIVR_DIV_13 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 13 */ -#define LL_RCC_PLLDIVR_DIV_14 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 14 */ -#define LL_RCC_PLLDIVR_DIV_15 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 15 */ -#define LL_RCC_PLLDIVR_DIV_16 (RCC_DCKCFGR_PLLDIVR_4) /*!< PLL division factor for PLLDIVR output by 16 */ -#define LL_RCC_PLLDIVR_DIV_17 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 17 */ -#define LL_RCC_PLLDIVR_DIV_18 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 18 */ -#define LL_RCC_PLLDIVR_DIV_19 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 19 */ -#define LL_RCC_PLLDIVR_DIV_20 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 20 */ -#define LL_RCC_PLLDIVR_DIV_21 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 21 */ -#define LL_RCC_PLLDIVR_DIV_22 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 22 */ -#define LL_RCC_PLLDIVR_DIV_23 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 23 */ -#define LL_RCC_PLLDIVR_DIV_24 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3) /*!< PLL division factor for PLLDIVR output by 24 */ -#define LL_RCC_PLLDIVR_DIV_25 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 25 */ -#define LL_RCC_PLLDIVR_DIV_26 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 26 */ -#define LL_RCC_PLLDIVR_DIV_27 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 27 */ -#define LL_RCC_PLLDIVR_DIV_28 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 28 */ -#define LL_RCC_PLLDIVR_DIV_29 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 29 */ -#define LL_RCC_PLLDIVR_DIV_30 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 30 */ -#define LL_RCC_PLLDIVR_DIV_31 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 31 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLDIVR */ - -/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) - * @{ - */ -#define LL_RCC_PLLP_DIV_2 0x00000000U /*!< Main PLL division factor for PLLP output by 2 */ -#define LL_RCC_PLLP_DIV_4 RCC_PLLCFGR_PLLP_0 /*!< Main PLL division factor for PLLP output by 4 */ -#define LL_RCC_PLLP_DIV_6 RCC_PLLCFGR_PLLP_1 /*!< Main PLL division factor for PLLP output by 6 */ -#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 8 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ) - * @{ - */ -#define LL_RCC_PLLQ_DIV_2 RCC_PLLCFGR_PLLQ_1 /*!< Main PLL division factor for PLLQ output by 2 */ -#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 3 */ -#define LL_RCC_PLLQ_DIV_4 RCC_PLLCFGR_PLLQ_2 /*!< Main PLL division factor for PLLQ output by 4 */ -#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 5 */ -#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */ -#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 7 */ -#define LL_RCC_PLLQ_DIV_8 RCC_PLLCFGR_PLLQ_3 /*!< Main PLL division factor for PLLQ output by 8 */ -#define LL_RCC_PLLQ_DIV_9 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 9 */ -#define LL_RCC_PLLQ_DIV_10 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 10 */ -#define LL_RCC_PLLQ_DIV_11 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 11 */ -#define LL_RCC_PLLQ_DIV_12 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 12 */ -#define LL_RCC_PLLQ_DIV_13 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 13 */ -#define LL_RCC_PLLQ_DIV_14 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 14 */ -#define LL_RCC_PLLQ_DIV_15 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 15 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLL_SPRE_SEL PLL Spread Spectrum Selection - * @{ - */ -#define LL_RCC_SPREAD_SELECT_CENTER 0x00000000U /*!< PLL center spread spectrum selection */ -#define LL_RCC_SPREAD_SELECT_DOWN RCC_SSCGR_SPREADSEL /*!< PLL down spread spectrum selection */ -/** - * @} - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** @defgroup RCC_LL_EC_PLLI2SM PLLI2SM division factor (PLLI2SM) - * @{ - */ -#if defined(RCC_PLLI2SCFGR_PLLI2SM) -#define LL_RCC_PLLI2SM_DIV_2 (RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 2 */ -#define LL_RCC_PLLI2SM_DIV_3 (RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 3 */ -#define LL_RCC_PLLI2SM_DIV_4 (RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 4 */ -#define LL_RCC_PLLI2SM_DIV_5 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 5 */ -#define LL_RCC_PLLI2SM_DIV_6 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 6 */ -#define LL_RCC_PLLI2SM_DIV_7 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 7 */ -#define LL_RCC_PLLI2SM_DIV_8 (RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 8 */ -#define LL_RCC_PLLI2SM_DIV_9 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 9 */ -#define LL_RCC_PLLI2SM_DIV_10 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 10 */ -#define LL_RCC_PLLI2SM_DIV_11 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 11 */ -#define LL_RCC_PLLI2SM_DIV_12 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 12 */ -#define LL_RCC_PLLI2SM_DIV_13 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 13 */ -#define LL_RCC_PLLI2SM_DIV_14 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 14 */ -#define LL_RCC_PLLI2SM_DIV_15 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 15 */ -#define LL_RCC_PLLI2SM_DIV_16 (RCC_PLLI2SCFGR_PLLI2SM_4) /*!< PLLI2S division factor for PLLI2SM output by 16 */ -#define LL_RCC_PLLI2SM_DIV_17 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 17 */ -#define LL_RCC_PLLI2SM_DIV_18 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 18 */ -#define LL_RCC_PLLI2SM_DIV_19 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 19 */ -#define LL_RCC_PLLI2SM_DIV_20 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 20 */ -#define LL_RCC_PLLI2SM_DIV_21 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 21 */ -#define LL_RCC_PLLI2SM_DIV_22 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 22 */ -#define LL_RCC_PLLI2SM_DIV_23 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 23 */ -#define LL_RCC_PLLI2SM_DIV_24 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 24 */ -#define LL_RCC_PLLI2SM_DIV_25 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 25 */ -#define LL_RCC_PLLI2SM_DIV_26 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 26 */ -#define LL_RCC_PLLI2SM_DIV_27 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 27 */ -#define LL_RCC_PLLI2SM_DIV_28 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 28 */ -#define LL_RCC_PLLI2SM_DIV_29 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 29 */ -#define LL_RCC_PLLI2SM_DIV_30 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 30 */ -#define LL_RCC_PLLI2SM_DIV_31 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 31 */ -#define LL_RCC_PLLI2SM_DIV_32 (RCC_PLLI2SCFGR_PLLI2SM_5) /*!< PLLI2S division factor for PLLI2SM output by 32 */ -#define LL_RCC_PLLI2SM_DIV_33 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 33 */ -#define LL_RCC_PLLI2SM_DIV_34 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 34 */ -#define LL_RCC_PLLI2SM_DIV_35 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 35 */ -#define LL_RCC_PLLI2SM_DIV_36 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 36 */ -#define LL_RCC_PLLI2SM_DIV_37 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 37 */ -#define LL_RCC_PLLI2SM_DIV_38 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 38 */ -#define LL_RCC_PLLI2SM_DIV_39 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 39 */ -#define LL_RCC_PLLI2SM_DIV_40 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 40 */ -#define LL_RCC_PLLI2SM_DIV_41 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 41 */ -#define LL_RCC_PLLI2SM_DIV_42 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 42 */ -#define LL_RCC_PLLI2SM_DIV_43 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 43 */ -#define LL_RCC_PLLI2SM_DIV_44 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 44 */ -#define LL_RCC_PLLI2SM_DIV_45 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 45 */ -#define LL_RCC_PLLI2SM_DIV_46 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 46 */ -#define LL_RCC_PLLI2SM_DIV_47 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 47 */ -#define LL_RCC_PLLI2SM_DIV_48 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4) /*!< PLLI2S division factor for PLLI2SM output by 48 */ -#define LL_RCC_PLLI2SM_DIV_49 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 49 */ -#define LL_RCC_PLLI2SM_DIV_50 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 50 */ -#define LL_RCC_PLLI2SM_DIV_51 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 51 */ -#define LL_RCC_PLLI2SM_DIV_52 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 52 */ -#define LL_RCC_PLLI2SM_DIV_53 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 53 */ -#define LL_RCC_PLLI2SM_DIV_54 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 54 */ -#define LL_RCC_PLLI2SM_DIV_55 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 55 */ -#define LL_RCC_PLLI2SM_DIV_56 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 56 */ -#define LL_RCC_PLLI2SM_DIV_57 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 57 */ -#define LL_RCC_PLLI2SM_DIV_58 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 58 */ -#define LL_RCC_PLLI2SM_DIV_59 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 59 */ -#define LL_RCC_PLLI2SM_DIV_60 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 60 */ -#define LL_RCC_PLLI2SM_DIV_61 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 61 */ -#define LL_RCC_PLLI2SM_DIV_62 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 62 */ -#define LL_RCC_PLLI2SM_DIV_63 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 63 */ -#else -#define LL_RCC_PLLI2SM_DIV_2 LL_RCC_PLLM_DIV_2 /*!< PLLI2S division factor for PLLI2SM output by 2 */ -#define LL_RCC_PLLI2SM_DIV_3 LL_RCC_PLLM_DIV_3 /*!< PLLI2S division factor for PLLI2SM output by 3 */ -#define LL_RCC_PLLI2SM_DIV_4 LL_RCC_PLLM_DIV_4 /*!< PLLI2S division factor for PLLI2SM output by 4 */ -#define LL_RCC_PLLI2SM_DIV_5 LL_RCC_PLLM_DIV_5 /*!< PLLI2S division factor for PLLI2SM output by 5 */ -#define LL_RCC_PLLI2SM_DIV_6 LL_RCC_PLLM_DIV_6 /*!< PLLI2S division factor for PLLI2SM output by 6 */ -#define LL_RCC_PLLI2SM_DIV_7 LL_RCC_PLLM_DIV_7 /*!< PLLI2S division factor for PLLI2SM output by 7 */ -#define LL_RCC_PLLI2SM_DIV_8 LL_RCC_PLLM_DIV_8 /*!< PLLI2S division factor for PLLI2SM output by 8 */ -#define LL_RCC_PLLI2SM_DIV_9 LL_RCC_PLLM_DIV_9 /*!< PLLI2S division factor for PLLI2SM output by 9 */ -#define LL_RCC_PLLI2SM_DIV_10 LL_RCC_PLLM_DIV_10 /*!< PLLI2S division factor for PLLI2SM output by 10 */ -#define LL_RCC_PLLI2SM_DIV_11 LL_RCC_PLLM_DIV_11 /*!< PLLI2S division factor for PLLI2SM output by 11 */ -#define LL_RCC_PLLI2SM_DIV_12 LL_RCC_PLLM_DIV_12 /*!< PLLI2S division factor for PLLI2SM output by 12 */ -#define LL_RCC_PLLI2SM_DIV_13 LL_RCC_PLLM_DIV_13 /*!< PLLI2S division factor for PLLI2SM output by 13 */ -#define LL_RCC_PLLI2SM_DIV_14 LL_RCC_PLLM_DIV_14 /*!< PLLI2S division factor for PLLI2SM output by 14 */ -#define LL_RCC_PLLI2SM_DIV_15 LL_RCC_PLLM_DIV_15 /*!< PLLI2S division factor for PLLI2SM output by 15 */ -#define LL_RCC_PLLI2SM_DIV_16 LL_RCC_PLLM_DIV_16 /*!< PLLI2S division factor for PLLI2SM output by 16 */ -#define LL_RCC_PLLI2SM_DIV_17 LL_RCC_PLLM_DIV_17 /*!< PLLI2S division factor for PLLI2SM output by 17 */ -#define LL_RCC_PLLI2SM_DIV_18 LL_RCC_PLLM_DIV_18 /*!< PLLI2S division factor for PLLI2SM output by 18 */ -#define LL_RCC_PLLI2SM_DIV_19 LL_RCC_PLLM_DIV_19 /*!< PLLI2S division factor for PLLI2SM output by 19 */ -#define LL_RCC_PLLI2SM_DIV_20 LL_RCC_PLLM_DIV_20 /*!< PLLI2S division factor for PLLI2SM output by 20 */ -#define LL_RCC_PLLI2SM_DIV_21 LL_RCC_PLLM_DIV_21 /*!< PLLI2S division factor for PLLI2SM output by 21 */ -#define LL_RCC_PLLI2SM_DIV_22 LL_RCC_PLLM_DIV_22 /*!< PLLI2S division factor for PLLI2SM output by 22 */ -#define LL_RCC_PLLI2SM_DIV_23 LL_RCC_PLLM_DIV_23 /*!< PLLI2S division factor for PLLI2SM output by 23 */ -#define LL_RCC_PLLI2SM_DIV_24 LL_RCC_PLLM_DIV_24 /*!< PLLI2S division factor for PLLI2SM output by 24 */ -#define LL_RCC_PLLI2SM_DIV_25 LL_RCC_PLLM_DIV_25 /*!< PLLI2S division factor for PLLI2SM output by 25 */ -#define LL_RCC_PLLI2SM_DIV_26 LL_RCC_PLLM_DIV_26 /*!< PLLI2S division factor for PLLI2SM output by 26 */ -#define LL_RCC_PLLI2SM_DIV_27 LL_RCC_PLLM_DIV_27 /*!< PLLI2S division factor for PLLI2SM output by 27 */ -#define LL_RCC_PLLI2SM_DIV_28 LL_RCC_PLLM_DIV_28 /*!< PLLI2S division factor for PLLI2SM output by 28 */ -#define LL_RCC_PLLI2SM_DIV_29 LL_RCC_PLLM_DIV_29 /*!< PLLI2S division factor for PLLI2SM output by 29 */ -#define LL_RCC_PLLI2SM_DIV_30 LL_RCC_PLLM_DIV_30 /*!< PLLI2S division factor for PLLI2SM output by 30 */ -#define LL_RCC_PLLI2SM_DIV_31 LL_RCC_PLLM_DIV_31 /*!< PLLI2S division factor for PLLI2SM output by 31 */ -#define LL_RCC_PLLI2SM_DIV_32 LL_RCC_PLLM_DIV_32 /*!< PLLI2S division factor for PLLI2SM output by 32 */ -#define LL_RCC_PLLI2SM_DIV_33 LL_RCC_PLLM_DIV_33 /*!< PLLI2S division factor for PLLI2SM output by 33 */ -#define LL_RCC_PLLI2SM_DIV_34 LL_RCC_PLLM_DIV_34 /*!< PLLI2S division factor for PLLI2SM output by 34 */ -#define LL_RCC_PLLI2SM_DIV_35 LL_RCC_PLLM_DIV_35 /*!< PLLI2S division factor for PLLI2SM output by 35 */ -#define LL_RCC_PLLI2SM_DIV_36 LL_RCC_PLLM_DIV_36 /*!< PLLI2S division factor for PLLI2SM output by 36 */ -#define LL_RCC_PLLI2SM_DIV_37 LL_RCC_PLLM_DIV_37 /*!< PLLI2S division factor for PLLI2SM output by 37 */ -#define LL_RCC_PLLI2SM_DIV_38 LL_RCC_PLLM_DIV_38 /*!< PLLI2S division factor for PLLI2SM output by 38 */ -#define LL_RCC_PLLI2SM_DIV_39 LL_RCC_PLLM_DIV_39 /*!< PLLI2S division factor for PLLI2SM output by 39 */ -#define LL_RCC_PLLI2SM_DIV_40 LL_RCC_PLLM_DIV_40 /*!< PLLI2S division factor for PLLI2SM output by 40 */ -#define LL_RCC_PLLI2SM_DIV_41 LL_RCC_PLLM_DIV_41 /*!< PLLI2S division factor for PLLI2SM output by 41 */ -#define LL_RCC_PLLI2SM_DIV_42 LL_RCC_PLLM_DIV_42 /*!< PLLI2S division factor for PLLI2SM output by 42 */ -#define LL_RCC_PLLI2SM_DIV_43 LL_RCC_PLLM_DIV_43 /*!< PLLI2S division factor for PLLI2SM output by 43 */ -#define LL_RCC_PLLI2SM_DIV_44 LL_RCC_PLLM_DIV_44 /*!< PLLI2S division factor for PLLI2SM output by 44 */ -#define LL_RCC_PLLI2SM_DIV_45 LL_RCC_PLLM_DIV_45 /*!< PLLI2S division factor for PLLI2SM output by 45 */ -#define LL_RCC_PLLI2SM_DIV_46 LL_RCC_PLLM_DIV_46 /*!< PLLI2S division factor for PLLI2SM output by 46 */ -#define LL_RCC_PLLI2SM_DIV_47 LL_RCC_PLLM_DIV_47 /*!< PLLI2S division factor for PLLI2SM output by 47 */ -#define LL_RCC_PLLI2SM_DIV_48 LL_RCC_PLLM_DIV_48 /*!< PLLI2S division factor for PLLI2SM output by 48 */ -#define LL_RCC_PLLI2SM_DIV_49 LL_RCC_PLLM_DIV_49 /*!< PLLI2S division factor for PLLI2SM output by 49 */ -#define LL_RCC_PLLI2SM_DIV_50 LL_RCC_PLLM_DIV_50 /*!< PLLI2S division factor for PLLI2SM output by 50 */ -#define LL_RCC_PLLI2SM_DIV_51 LL_RCC_PLLM_DIV_51 /*!< PLLI2S division factor for PLLI2SM output by 51 */ -#define LL_RCC_PLLI2SM_DIV_52 LL_RCC_PLLM_DIV_52 /*!< PLLI2S division factor for PLLI2SM output by 52 */ -#define LL_RCC_PLLI2SM_DIV_53 LL_RCC_PLLM_DIV_53 /*!< PLLI2S division factor for PLLI2SM output by 53 */ -#define LL_RCC_PLLI2SM_DIV_54 LL_RCC_PLLM_DIV_54 /*!< PLLI2S division factor for PLLI2SM output by 54 */ -#define LL_RCC_PLLI2SM_DIV_55 LL_RCC_PLLM_DIV_55 /*!< PLLI2S division factor for PLLI2SM output by 55 */ -#define LL_RCC_PLLI2SM_DIV_56 LL_RCC_PLLM_DIV_56 /*!< PLLI2S division factor for PLLI2SM output by 56 */ -#define LL_RCC_PLLI2SM_DIV_57 LL_RCC_PLLM_DIV_57 /*!< PLLI2S division factor for PLLI2SM output by 57 */ -#define LL_RCC_PLLI2SM_DIV_58 LL_RCC_PLLM_DIV_58 /*!< PLLI2S division factor for PLLI2SM output by 58 */ -#define LL_RCC_PLLI2SM_DIV_59 LL_RCC_PLLM_DIV_59 /*!< PLLI2S division factor for PLLI2SM output by 59 */ -#define LL_RCC_PLLI2SM_DIV_60 LL_RCC_PLLM_DIV_60 /*!< PLLI2S division factor for PLLI2SM output by 60 */ -#define LL_RCC_PLLI2SM_DIV_61 LL_RCC_PLLM_DIV_61 /*!< PLLI2S division factor for PLLI2SM output by 61 */ -#define LL_RCC_PLLI2SM_DIV_62 LL_RCC_PLLM_DIV_62 /*!< PLLI2S division factor for PLLI2SM output by 62 */ -#define LL_RCC_PLLI2SM_DIV_63 LL_RCC_PLLM_DIV_63 /*!< PLLI2S division factor for PLLI2SM output by 63 */ -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -/** - * @} - */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) -/** @defgroup RCC_LL_EC_PLLI2SQ PLLI2SQ division factor (PLLI2SQ) - * @{ - */ -#define LL_RCC_PLLI2SQ_DIV_2 RCC_PLLI2SCFGR_PLLI2SQ_1 /*!< PLLI2S division factor for PLLI2SQ output by 2 */ -#define LL_RCC_PLLI2SQ_DIV_3 (RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 3 */ -#define LL_RCC_PLLI2SQ_DIV_4 RCC_PLLI2SCFGR_PLLI2SQ_2 /*!< PLLI2S division factor for PLLI2SQ output by 4 */ -#define LL_RCC_PLLI2SQ_DIV_5 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 5 */ -#define LL_RCC_PLLI2SQ_DIV_6 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 6 */ -#define LL_RCC_PLLI2SQ_DIV_7 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 7 */ -#define LL_RCC_PLLI2SQ_DIV_8 RCC_PLLI2SCFGR_PLLI2SQ_3 /*!< PLLI2S division factor for PLLI2SQ output by 8 */ -#define LL_RCC_PLLI2SQ_DIV_9 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 9 */ -#define LL_RCC_PLLI2SQ_DIV_10 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 10 */ -#define LL_RCC_PLLI2SQ_DIV_11 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 11 */ -#define LL_RCC_PLLI2SQ_DIV_12 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2) /*!< PLLI2S division factor for PLLI2SQ output by 12 */ -#define LL_RCC_PLLI2SQ_DIV_13 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 13 */ -#define LL_RCC_PLLI2SQ_DIV_14 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 14 */ -#define LL_RCC_PLLI2SQ_DIV_15 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 15 */ -/** - * @} - */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** @defgroup RCC_LL_EC_PLLI2SDIVQ PLLI2SDIVQ division factor (PLLI2SDIVQ) - * @{ - */ -#define LL_RCC_PLLI2SDIVQ_DIV_1 0x00000000U /*!< PLLI2S division factor for PLLI2SDIVQ output by 1 */ -#define LL_RCC_PLLI2SDIVQ_DIV_2 RCC_DCKCFGR_PLLI2SDIVQ_0 /*!< PLLI2S division factor for PLLI2SDIVQ output by 2 */ -#define LL_RCC_PLLI2SDIVQ_DIV_3 RCC_DCKCFGR_PLLI2SDIVQ_1 /*!< PLLI2S division factor for PLLI2SDIVQ output by 3 */ -#define LL_RCC_PLLI2SDIVQ_DIV_4 (RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 4 */ -#define LL_RCC_PLLI2SDIVQ_DIV_5 RCC_DCKCFGR_PLLI2SDIVQ_2 /*!< PLLI2S division factor for PLLI2SDIVQ output by 5 */ -#define LL_RCC_PLLI2SDIVQ_DIV_6 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 6 */ -#define LL_RCC_PLLI2SDIVQ_DIV_7 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 7 */ -#define LL_RCC_PLLI2SDIVQ_DIV_8 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 8 */ -#define LL_RCC_PLLI2SDIVQ_DIV_9 RCC_DCKCFGR_PLLI2SDIVQ_3 /*!< PLLI2S division factor for PLLI2SDIVQ output by 9 */ -#define LL_RCC_PLLI2SDIVQ_DIV_10 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 10 */ -#define LL_RCC_PLLI2SDIVQ_DIV_11 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 11 */ -#define LL_RCC_PLLI2SDIVQ_DIV_12 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 12 */ -#define LL_RCC_PLLI2SDIVQ_DIV_13 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 13 */ -#define LL_RCC_PLLI2SDIVQ_DIV_14 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 14 */ -#define LL_RCC_PLLI2SDIVQ_DIV_15 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 15 */ -#define LL_RCC_PLLI2SDIVQ_DIV_16 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 16 */ -#define LL_RCC_PLLI2SDIVQ_DIV_17 RCC_DCKCFGR_PLLI2SDIVQ_4 /*!< PLLI2S division factor for PLLI2SDIVQ output by 17 */ -#define LL_RCC_PLLI2SDIVQ_DIV_18 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 18 */ -#define LL_RCC_PLLI2SDIVQ_DIV_19 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 19 */ -#define LL_RCC_PLLI2SDIVQ_DIV_20 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 20 */ -#define LL_RCC_PLLI2SDIVQ_DIV_21 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 21 */ -#define LL_RCC_PLLI2SDIVQ_DIV_22 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 22 */ -#define LL_RCC_PLLI2SDIVQ_DIV_23 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 23 */ -#define LL_RCC_PLLI2SDIVQ_DIV_24 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 24 */ -#define LL_RCC_PLLI2SDIVQ_DIV_25 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3) /*!< PLLI2S division factor for PLLI2SDIVQ output by 25 */ -#define LL_RCC_PLLI2SDIVQ_DIV_26 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 26 */ -#define LL_RCC_PLLI2SDIVQ_DIV_27 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 27 */ -#define LL_RCC_PLLI2SDIVQ_DIV_28 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 28 */ -#define LL_RCC_PLLI2SDIVQ_DIV_29 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 29 */ -#define LL_RCC_PLLI2SDIVQ_DIV_30 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 30 */ -#define LL_RCC_PLLI2SDIVQ_DIV_31 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 31 */ -#define LL_RCC_PLLI2SDIVQ_DIV_32 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 32 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVR) -/** @defgroup RCC_LL_EC_PLLI2SDIVR PLLI2SDIVR division factor (PLLI2SDIVR) - * @{ - */ -#define LL_RCC_PLLI2SDIVR_DIV_1 (RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 1 */ -#define LL_RCC_PLLI2SDIVR_DIV_2 (RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 2 */ -#define LL_RCC_PLLI2SDIVR_DIV_3 (RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 3 */ -#define LL_RCC_PLLI2SDIVR_DIV_4 (RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 4 */ -#define LL_RCC_PLLI2SDIVR_DIV_5 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 5 */ -#define LL_RCC_PLLI2SDIVR_DIV_6 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 6 */ -#define LL_RCC_PLLI2SDIVR_DIV_7 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 7 */ -#define LL_RCC_PLLI2SDIVR_DIV_8 (RCC_DCKCFGR_PLLI2SDIVR_3) /*!< PLLI2S division factor for PLLI2SDIVR output by 8 */ -#define LL_RCC_PLLI2SDIVR_DIV_9 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 9 */ -#define LL_RCC_PLLI2SDIVR_DIV_10 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 10 */ -#define LL_RCC_PLLI2SDIVR_DIV_11 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 11 */ -#define LL_RCC_PLLI2SDIVR_DIV_12 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 12 */ -#define LL_RCC_PLLI2SDIVR_DIV_13 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 13 */ -#define LL_RCC_PLLI2SDIVR_DIV_14 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 14 */ -#define LL_RCC_PLLI2SDIVR_DIV_15 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 15 */ -#define LL_RCC_PLLI2SDIVR_DIV_16 (RCC_DCKCFGR_PLLI2SDIVR_4) /*!< PLLI2S division factor for PLLI2SDIVR output by 16 */ -#define LL_RCC_PLLI2SDIVR_DIV_17 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 17 */ -#define LL_RCC_PLLI2SDIVR_DIV_18 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 18 */ -#define LL_RCC_PLLI2SDIVR_DIV_19 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 19 */ -#define LL_RCC_PLLI2SDIVR_DIV_20 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 20 */ -#define LL_RCC_PLLI2SDIVR_DIV_21 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 21 */ -#define LL_RCC_PLLI2SDIVR_DIV_22 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 22 */ -#define LL_RCC_PLLI2SDIVR_DIV_23 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 23 */ -#define LL_RCC_PLLI2SDIVR_DIV_24 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3) /*!< PLLI2S division factor for PLLI2SDIVR output by 24 */ -#define LL_RCC_PLLI2SDIVR_DIV_25 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 25 */ -#define LL_RCC_PLLI2SDIVR_DIV_26 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 26 */ -#define LL_RCC_PLLI2SDIVR_DIV_27 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 27 */ -#define LL_RCC_PLLI2SDIVR_DIV_28 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 28 */ -#define LL_RCC_PLLI2SDIVR_DIV_29 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 29 */ -#define LL_RCC_PLLI2SDIVR_DIV_30 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 30 */ -#define LL_RCC_PLLI2SDIVR_DIV_31 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 31 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLI2SDIVR */ - -/** @defgroup RCC_LL_EC_PLLI2SR PLLI2SR division factor (PLLI2SR) - * @{ - */ -#define LL_RCC_PLLI2SR_DIV_2 RCC_PLLI2SCFGR_PLLI2SR_1 /*!< PLLI2S division factor for PLLI2SR output by 2 */ -#define LL_RCC_PLLI2SR_DIV_3 (RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 3 */ -#define LL_RCC_PLLI2SR_DIV_4 RCC_PLLI2SCFGR_PLLI2SR_2 /*!< PLLI2S division factor for PLLI2SR output by 4 */ -#define LL_RCC_PLLI2SR_DIV_5 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 5 */ -#define LL_RCC_PLLI2SR_DIV_6 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1) /*!< PLLI2S division factor for PLLI2SR output by 6 */ -#define LL_RCC_PLLI2SR_DIV_7 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 7 */ -/** - * @} - */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SP) -/** @defgroup RCC_LL_EC_PLLI2SP PLLI2SP division factor (PLLI2SP) - * @{ - */ -#define LL_RCC_PLLI2SP_DIV_2 0x00000000U /*!< PLLI2S division factor for PLLI2SP output by 2 */ -#define LL_RCC_PLLI2SP_DIV_4 RCC_PLLI2SCFGR_PLLI2SP_0 /*!< PLLI2S division factor for PLLI2SP output by 4 */ -#define LL_RCC_PLLI2SP_DIV_6 RCC_PLLI2SCFGR_PLLI2SP_1 /*!< PLLI2S division factor for PLLI2SP output by 6 */ -#define LL_RCC_PLLI2SP_DIV_8 (RCC_PLLI2SCFGR_PLLI2SP_1 | RCC_PLLI2SCFGR_PLLI2SP_0) /*!< PLLI2S division factor for PLLI2SP output by 8 */ -/** - * @} - */ -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** @defgroup RCC_LL_EC_PLLSAIM PLLSAIM division factor (PLLSAIM or PLLM) - * @{ - */ -#if defined(RCC_PLLSAICFGR_PLLSAIM) -#define LL_RCC_PLLSAIM_DIV_2 (RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 2 */ -#define LL_RCC_PLLSAIM_DIV_3 (RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 3 */ -#define LL_RCC_PLLSAIM_DIV_4 (RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 4 */ -#define LL_RCC_PLLSAIM_DIV_5 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 5 */ -#define LL_RCC_PLLSAIM_DIV_6 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 6 */ -#define LL_RCC_PLLSAIM_DIV_7 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 7 */ -#define LL_RCC_PLLSAIM_DIV_8 (RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 8 */ -#define LL_RCC_PLLSAIM_DIV_9 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 9 */ -#define LL_RCC_PLLSAIM_DIV_10 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 10 */ -#define LL_RCC_PLLSAIM_DIV_11 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 11 */ -#define LL_RCC_PLLSAIM_DIV_12 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 12 */ -#define LL_RCC_PLLSAIM_DIV_13 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 13 */ -#define LL_RCC_PLLSAIM_DIV_14 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 14 */ -#define LL_RCC_PLLSAIM_DIV_15 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 15 */ -#define LL_RCC_PLLSAIM_DIV_16 (RCC_PLLSAICFGR_PLLSAIM_4) /*!< PLLSAI division factor for PLLSAIM output by 16 */ -#define LL_RCC_PLLSAIM_DIV_17 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 17 */ -#define LL_RCC_PLLSAIM_DIV_18 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 18 */ -#define LL_RCC_PLLSAIM_DIV_19 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 19 */ -#define LL_RCC_PLLSAIM_DIV_20 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 20 */ -#define LL_RCC_PLLSAIM_DIV_21 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 21 */ -#define LL_RCC_PLLSAIM_DIV_22 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 22 */ -#define LL_RCC_PLLSAIM_DIV_23 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 23 */ -#define LL_RCC_PLLSAIM_DIV_24 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 24 */ -#define LL_RCC_PLLSAIM_DIV_25 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 25 */ -#define LL_RCC_PLLSAIM_DIV_26 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 26 */ -#define LL_RCC_PLLSAIM_DIV_27 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 27 */ -#define LL_RCC_PLLSAIM_DIV_28 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 28 */ -#define LL_RCC_PLLSAIM_DIV_29 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 29 */ -#define LL_RCC_PLLSAIM_DIV_30 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 30 */ -#define LL_RCC_PLLSAIM_DIV_31 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 31 */ -#define LL_RCC_PLLSAIM_DIV_32 (RCC_PLLSAICFGR_PLLSAIM_5) /*!< PLLSAI division factor for PLLSAIM output by 32 */ -#define LL_RCC_PLLSAIM_DIV_33 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 33 */ -#define LL_RCC_PLLSAIM_DIV_34 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 34 */ -#define LL_RCC_PLLSAIM_DIV_35 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 35 */ -#define LL_RCC_PLLSAIM_DIV_36 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 36 */ -#define LL_RCC_PLLSAIM_DIV_37 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 37 */ -#define LL_RCC_PLLSAIM_DIV_38 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 38 */ -#define LL_RCC_PLLSAIM_DIV_39 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 39 */ -#define LL_RCC_PLLSAIM_DIV_40 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 40 */ -#define LL_RCC_PLLSAIM_DIV_41 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 41 */ -#define LL_RCC_PLLSAIM_DIV_42 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 42 */ -#define LL_RCC_PLLSAIM_DIV_43 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 43 */ -#define LL_RCC_PLLSAIM_DIV_44 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 44 */ -#define LL_RCC_PLLSAIM_DIV_45 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 45 */ -#define LL_RCC_PLLSAIM_DIV_46 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 46 */ -#define LL_RCC_PLLSAIM_DIV_47 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 47 */ -#define LL_RCC_PLLSAIM_DIV_48 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4) /*!< PLLSAI division factor for PLLSAIM output by 48 */ -#define LL_RCC_PLLSAIM_DIV_49 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 49 */ -#define LL_RCC_PLLSAIM_DIV_50 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 50 */ -#define LL_RCC_PLLSAIM_DIV_51 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 51 */ -#define LL_RCC_PLLSAIM_DIV_52 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 52 */ -#define LL_RCC_PLLSAIM_DIV_53 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 53 */ -#define LL_RCC_PLLSAIM_DIV_54 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 54 */ -#define LL_RCC_PLLSAIM_DIV_55 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 55 */ -#define LL_RCC_PLLSAIM_DIV_56 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 56 */ -#define LL_RCC_PLLSAIM_DIV_57 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 57 */ -#define LL_RCC_PLLSAIM_DIV_58 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 58 */ -#define LL_RCC_PLLSAIM_DIV_59 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 59 */ -#define LL_RCC_PLLSAIM_DIV_60 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 60 */ -#define LL_RCC_PLLSAIM_DIV_61 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 61 */ -#define LL_RCC_PLLSAIM_DIV_62 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 62 */ -#define LL_RCC_PLLSAIM_DIV_63 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 63 */ -#else -#define LL_RCC_PLLSAIM_DIV_2 LL_RCC_PLLM_DIV_2 /*!< PLLSAI division factor for PLLSAIM output by 2 */ -#define LL_RCC_PLLSAIM_DIV_3 LL_RCC_PLLM_DIV_3 /*!< PLLSAI division factor for PLLSAIM output by 3 */ -#define LL_RCC_PLLSAIM_DIV_4 LL_RCC_PLLM_DIV_4 /*!< PLLSAI division factor for PLLSAIM output by 4 */ -#define LL_RCC_PLLSAIM_DIV_5 LL_RCC_PLLM_DIV_5 /*!< PLLSAI division factor for PLLSAIM output by 5 */ -#define LL_RCC_PLLSAIM_DIV_6 LL_RCC_PLLM_DIV_6 /*!< PLLSAI division factor for PLLSAIM output by 6 */ -#define LL_RCC_PLLSAIM_DIV_7 LL_RCC_PLLM_DIV_7 /*!< PLLSAI division factor for PLLSAIM output by 7 */ -#define LL_RCC_PLLSAIM_DIV_8 LL_RCC_PLLM_DIV_8 /*!< PLLSAI division factor for PLLSAIM output by 8 */ -#define LL_RCC_PLLSAIM_DIV_9 LL_RCC_PLLM_DIV_9 /*!< PLLSAI division factor for PLLSAIM output by 9 */ -#define LL_RCC_PLLSAIM_DIV_10 LL_RCC_PLLM_DIV_10 /*!< PLLSAI division factor for PLLSAIM output by 10 */ -#define LL_RCC_PLLSAIM_DIV_11 LL_RCC_PLLM_DIV_11 /*!< PLLSAI division factor for PLLSAIM output by 11 */ -#define LL_RCC_PLLSAIM_DIV_12 LL_RCC_PLLM_DIV_12 /*!< PLLSAI division factor for PLLSAIM output by 12 */ -#define LL_RCC_PLLSAIM_DIV_13 LL_RCC_PLLM_DIV_13 /*!< PLLSAI division factor for PLLSAIM output by 13 */ -#define LL_RCC_PLLSAIM_DIV_14 LL_RCC_PLLM_DIV_14 /*!< PLLSAI division factor for PLLSAIM output by 14 */ -#define LL_RCC_PLLSAIM_DIV_15 LL_RCC_PLLM_DIV_15 /*!< PLLSAI division factor for PLLSAIM output by 15 */ -#define LL_RCC_PLLSAIM_DIV_16 LL_RCC_PLLM_DIV_16 /*!< PLLSAI division factor for PLLSAIM output by 16 */ -#define LL_RCC_PLLSAIM_DIV_17 LL_RCC_PLLM_DIV_17 /*!< PLLSAI division factor for PLLSAIM output by 17 */ -#define LL_RCC_PLLSAIM_DIV_18 LL_RCC_PLLM_DIV_18 /*!< PLLSAI division factor for PLLSAIM output by 18 */ -#define LL_RCC_PLLSAIM_DIV_19 LL_RCC_PLLM_DIV_19 /*!< PLLSAI division factor for PLLSAIM output by 19 */ -#define LL_RCC_PLLSAIM_DIV_20 LL_RCC_PLLM_DIV_20 /*!< PLLSAI division factor for PLLSAIM output by 20 */ -#define LL_RCC_PLLSAIM_DIV_21 LL_RCC_PLLM_DIV_21 /*!< PLLSAI division factor for PLLSAIM output by 21 */ -#define LL_RCC_PLLSAIM_DIV_22 LL_RCC_PLLM_DIV_22 /*!< PLLSAI division factor for PLLSAIM output by 22 */ -#define LL_RCC_PLLSAIM_DIV_23 LL_RCC_PLLM_DIV_23 /*!< PLLSAI division factor for PLLSAIM output by 23 */ -#define LL_RCC_PLLSAIM_DIV_24 LL_RCC_PLLM_DIV_24 /*!< PLLSAI division factor for PLLSAIM output by 24 */ -#define LL_RCC_PLLSAIM_DIV_25 LL_RCC_PLLM_DIV_25 /*!< PLLSAI division factor for PLLSAIM output by 25 */ -#define LL_RCC_PLLSAIM_DIV_26 LL_RCC_PLLM_DIV_26 /*!< PLLSAI division factor for PLLSAIM output by 26 */ -#define LL_RCC_PLLSAIM_DIV_27 LL_RCC_PLLM_DIV_27 /*!< PLLSAI division factor for PLLSAIM output by 27 */ -#define LL_RCC_PLLSAIM_DIV_28 LL_RCC_PLLM_DIV_28 /*!< PLLSAI division factor for PLLSAIM output by 28 */ -#define LL_RCC_PLLSAIM_DIV_29 LL_RCC_PLLM_DIV_29 /*!< PLLSAI division factor for PLLSAIM output by 29 */ -#define LL_RCC_PLLSAIM_DIV_30 LL_RCC_PLLM_DIV_30 /*!< PLLSAI division factor for PLLSAIM output by 30 */ -#define LL_RCC_PLLSAIM_DIV_31 LL_RCC_PLLM_DIV_31 /*!< PLLSAI division factor for PLLSAIM output by 31 */ -#define LL_RCC_PLLSAIM_DIV_32 LL_RCC_PLLM_DIV_32 /*!< PLLSAI division factor for PLLSAIM output by 32 */ -#define LL_RCC_PLLSAIM_DIV_33 LL_RCC_PLLM_DIV_33 /*!< PLLSAI division factor for PLLSAIM output by 33 */ -#define LL_RCC_PLLSAIM_DIV_34 LL_RCC_PLLM_DIV_34 /*!< PLLSAI division factor for PLLSAIM output by 34 */ -#define LL_RCC_PLLSAIM_DIV_35 LL_RCC_PLLM_DIV_35 /*!< PLLSAI division factor for PLLSAIM output by 35 */ -#define LL_RCC_PLLSAIM_DIV_36 LL_RCC_PLLM_DIV_36 /*!< PLLSAI division factor for PLLSAIM output by 36 */ -#define LL_RCC_PLLSAIM_DIV_37 LL_RCC_PLLM_DIV_37 /*!< PLLSAI division factor for PLLSAIM output by 37 */ -#define LL_RCC_PLLSAIM_DIV_38 LL_RCC_PLLM_DIV_38 /*!< PLLSAI division factor for PLLSAIM output by 38 */ -#define LL_RCC_PLLSAIM_DIV_39 LL_RCC_PLLM_DIV_39 /*!< PLLSAI division factor for PLLSAIM output by 39 */ -#define LL_RCC_PLLSAIM_DIV_40 LL_RCC_PLLM_DIV_40 /*!< PLLSAI division factor for PLLSAIM output by 40 */ -#define LL_RCC_PLLSAIM_DIV_41 LL_RCC_PLLM_DIV_41 /*!< PLLSAI division factor for PLLSAIM output by 41 */ -#define LL_RCC_PLLSAIM_DIV_42 LL_RCC_PLLM_DIV_42 /*!< PLLSAI division factor for PLLSAIM output by 42 */ -#define LL_RCC_PLLSAIM_DIV_43 LL_RCC_PLLM_DIV_43 /*!< PLLSAI division factor for PLLSAIM output by 43 */ -#define LL_RCC_PLLSAIM_DIV_44 LL_RCC_PLLM_DIV_44 /*!< PLLSAI division factor for PLLSAIM output by 44 */ -#define LL_RCC_PLLSAIM_DIV_45 LL_RCC_PLLM_DIV_45 /*!< PLLSAI division factor for PLLSAIM output by 45 */ -#define LL_RCC_PLLSAIM_DIV_46 LL_RCC_PLLM_DIV_46 /*!< PLLSAI division factor for PLLSAIM output by 46 */ -#define LL_RCC_PLLSAIM_DIV_47 LL_RCC_PLLM_DIV_47 /*!< PLLSAI division factor for PLLSAIM output by 47 */ -#define LL_RCC_PLLSAIM_DIV_48 LL_RCC_PLLM_DIV_48 /*!< PLLSAI division factor for PLLSAIM output by 48 */ -#define LL_RCC_PLLSAIM_DIV_49 LL_RCC_PLLM_DIV_49 /*!< PLLSAI division factor for PLLSAIM output by 49 */ -#define LL_RCC_PLLSAIM_DIV_50 LL_RCC_PLLM_DIV_50 /*!< PLLSAI division factor for PLLSAIM output by 50 */ -#define LL_RCC_PLLSAIM_DIV_51 LL_RCC_PLLM_DIV_51 /*!< PLLSAI division factor for PLLSAIM output by 51 */ -#define LL_RCC_PLLSAIM_DIV_52 LL_RCC_PLLM_DIV_52 /*!< PLLSAI division factor for PLLSAIM output by 52 */ -#define LL_RCC_PLLSAIM_DIV_53 LL_RCC_PLLM_DIV_53 /*!< PLLSAI division factor for PLLSAIM output by 53 */ -#define LL_RCC_PLLSAIM_DIV_54 LL_RCC_PLLM_DIV_54 /*!< PLLSAI division factor for PLLSAIM output by 54 */ -#define LL_RCC_PLLSAIM_DIV_55 LL_RCC_PLLM_DIV_55 /*!< PLLSAI division factor for PLLSAIM output by 55 */ -#define LL_RCC_PLLSAIM_DIV_56 LL_RCC_PLLM_DIV_56 /*!< PLLSAI division factor for PLLSAIM output by 56 */ -#define LL_RCC_PLLSAIM_DIV_57 LL_RCC_PLLM_DIV_57 /*!< PLLSAI division factor for PLLSAIM output by 57 */ -#define LL_RCC_PLLSAIM_DIV_58 LL_RCC_PLLM_DIV_58 /*!< PLLSAI division factor for PLLSAIM output by 58 */ -#define LL_RCC_PLLSAIM_DIV_59 LL_RCC_PLLM_DIV_59 /*!< PLLSAI division factor for PLLSAIM output by 59 */ -#define LL_RCC_PLLSAIM_DIV_60 LL_RCC_PLLM_DIV_60 /*!< PLLSAI division factor for PLLSAIM output by 60 */ -#define LL_RCC_PLLSAIM_DIV_61 LL_RCC_PLLM_DIV_61 /*!< PLLSAI division factor for PLLSAIM output by 61 */ -#define LL_RCC_PLLSAIM_DIV_62 LL_RCC_PLLM_DIV_62 /*!< PLLSAI division factor for PLLSAIM output by 62 */ -#define LL_RCC_PLLSAIM_DIV_63 LL_RCC_PLLM_DIV_63 /*!< PLLSAI division factor for PLLSAIM output by 63 */ -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLSAIQ PLLSAIQ division factor (PLLSAIQ) - * @{ - */ -#define LL_RCC_PLLSAIQ_DIV_2 RCC_PLLSAICFGR_PLLSAIQ_1 /*!< PLLSAI division factor for PLLSAIQ output by 2 */ -#define LL_RCC_PLLSAIQ_DIV_3 (RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 3 */ -#define LL_RCC_PLLSAIQ_DIV_4 RCC_PLLSAICFGR_PLLSAIQ_2 /*!< PLLSAI division factor for PLLSAIQ output by 4 */ -#define LL_RCC_PLLSAIQ_DIV_5 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 5 */ -#define LL_RCC_PLLSAIQ_DIV_6 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 6 */ -#define LL_RCC_PLLSAIQ_DIV_7 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 7 */ -#define LL_RCC_PLLSAIQ_DIV_8 RCC_PLLSAICFGR_PLLSAIQ_3 /*!< PLLSAI division factor for PLLSAIQ output by 8 */ -#define LL_RCC_PLLSAIQ_DIV_9 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 9 */ -#define LL_RCC_PLLSAIQ_DIV_10 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 10 */ -#define LL_RCC_PLLSAIQ_DIV_11 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 11 */ -#define LL_RCC_PLLSAIQ_DIV_12 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2) /*!< PLLSAI division factor for PLLSAIQ output by 12 */ -#define LL_RCC_PLLSAIQ_DIV_13 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 13 */ -#define LL_RCC_PLLSAIQ_DIV_14 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 14 */ -#define LL_RCC_PLLSAIQ_DIV_15 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 15 */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVQ) -/** @defgroup RCC_LL_EC_PLLSAIDIVQ PLLSAIDIVQ division factor (PLLSAIDIVQ) - * @{ - */ -#define LL_RCC_PLLSAIDIVQ_DIV_1 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVQ output by 1 */ -#define LL_RCC_PLLSAIDIVQ_DIV_2 RCC_DCKCFGR_PLLSAIDIVQ_0 /*!< PLLSAI division factor for PLLSAIDIVQ output by 2 */ -#define LL_RCC_PLLSAIDIVQ_DIV_3 RCC_DCKCFGR_PLLSAIDIVQ_1 /*!< PLLSAI division factor for PLLSAIDIVQ output by 3 */ -#define LL_RCC_PLLSAIDIVQ_DIV_4 (RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 4 */ -#define LL_RCC_PLLSAIDIVQ_DIV_5 RCC_DCKCFGR_PLLSAIDIVQ_2 /*!< PLLSAI division factor for PLLSAIDIVQ output by 5 */ -#define LL_RCC_PLLSAIDIVQ_DIV_6 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 6 */ -#define LL_RCC_PLLSAIDIVQ_DIV_7 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 7 */ -#define LL_RCC_PLLSAIDIVQ_DIV_8 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 8 */ -#define LL_RCC_PLLSAIDIVQ_DIV_9 RCC_DCKCFGR_PLLSAIDIVQ_3 /*!< PLLSAI division factor for PLLSAIDIVQ output by 9 */ -#define LL_RCC_PLLSAIDIVQ_DIV_10 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 10 */ -#define LL_RCC_PLLSAIDIVQ_DIV_11 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 11 */ -#define LL_RCC_PLLSAIDIVQ_DIV_12 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 12 */ -#define LL_RCC_PLLSAIDIVQ_DIV_13 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 13 */ -#define LL_RCC_PLLSAIDIVQ_DIV_14 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 14 */ -#define LL_RCC_PLLSAIDIVQ_DIV_15 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 15 */ -#define LL_RCC_PLLSAIDIVQ_DIV_16 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 16 */ -#define LL_RCC_PLLSAIDIVQ_DIV_17 RCC_DCKCFGR_PLLSAIDIVQ_4 /*!< PLLSAI division factor for PLLSAIDIVQ output by 17 */ -#define LL_RCC_PLLSAIDIVQ_DIV_18 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 18 */ -#define LL_RCC_PLLSAIDIVQ_DIV_19 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 19 */ -#define LL_RCC_PLLSAIDIVQ_DIV_20 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 20 */ -#define LL_RCC_PLLSAIDIVQ_DIV_21 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 21 */ -#define LL_RCC_PLLSAIDIVQ_DIV_22 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 22 */ -#define LL_RCC_PLLSAIDIVQ_DIV_23 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 23 */ -#define LL_RCC_PLLSAIDIVQ_DIV_24 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 24 */ -#define LL_RCC_PLLSAIDIVQ_DIV_25 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3) /*!< PLLSAI division factor for PLLSAIDIVQ output by 25 */ -#define LL_RCC_PLLSAIDIVQ_DIV_26 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 26 */ -#define LL_RCC_PLLSAIDIVQ_DIV_27 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 27 */ -#define LL_RCC_PLLSAIDIVQ_DIV_28 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 28 */ -#define LL_RCC_PLLSAIDIVQ_DIV_29 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 29 */ -#define LL_RCC_PLLSAIDIVQ_DIV_30 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 30 */ -#define LL_RCC_PLLSAIDIVQ_DIV_31 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 31 */ -#define LL_RCC_PLLSAIDIVQ_DIV_32 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 32 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLSAIDIVQ */ - -#if defined(RCC_PLLSAICFGR_PLLSAIR) -/** @defgroup RCC_LL_EC_PLLSAIR PLLSAIR division factor (PLLSAIR) - * @{ - */ -#define LL_RCC_PLLSAIR_DIV_2 RCC_PLLSAICFGR_PLLSAIR_1 /*!< PLLSAI division factor for PLLSAIR output by 2 */ -#define LL_RCC_PLLSAIR_DIV_3 (RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 3 */ -#define LL_RCC_PLLSAIR_DIV_4 RCC_PLLSAICFGR_PLLSAIR_2 /*!< PLLSAI division factor for PLLSAIR output by 4 */ -#define LL_RCC_PLLSAIR_DIV_5 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 5 */ -#define LL_RCC_PLLSAIR_DIV_6 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1) /*!< PLLSAI division factor for PLLSAIR output by 6 */ -#define LL_RCC_PLLSAIR_DIV_7 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 7 */ -/** - * @} - */ -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -/** @defgroup RCC_LL_EC_PLLSAIDIVR PLLSAIDIVR division factor (PLLSAIDIVR) - * @{ - */ -#define LL_RCC_PLLSAIDIVR_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVR output by 2 */ -#define LL_RCC_PLLSAIDIVR_DIV_4 RCC_DCKCFGR_PLLSAIDIVR_0 /*!< PLLSAI division factor for PLLSAIDIVR output by 4 */ -#define LL_RCC_PLLSAIDIVR_DIV_8 RCC_DCKCFGR_PLLSAIDIVR_1 /*!< PLLSAI division factor for PLLSAIDIVR output by 8 */ -#define LL_RCC_PLLSAIDIVR_DIV_16 (RCC_DCKCFGR_PLLSAIDIVR_1 | RCC_DCKCFGR_PLLSAIDIVR_0) /*!< PLLSAI division factor for PLLSAIDIVR output by 16 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** @defgroup RCC_LL_EC_PLLSAIP PLLSAIP division factor (PLLSAIP) - * @{ - */ -#define LL_RCC_PLLSAIP_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIP output by 2 */ -#define LL_RCC_PLLSAIP_DIV_4 RCC_PLLSAICFGR_PLLSAIP_0 /*!< PLLSAI division factor for PLLSAIP output by 4 */ -#define LL_RCC_PLLSAIP_DIV_6 RCC_PLLSAICFGR_PLLSAIP_1 /*!< PLLSAI division factor for PLLSAIP output by 6 */ -#define LL_RCC_PLLSAIP_DIV_8 (RCC_PLLSAICFGR_PLLSAIP_1 | RCC_PLLSAICFGR_PLLSAIP_0) /*!< PLLSAI division factor for PLLSAIP output by 8 */ -/** - * @} - */ -#endif /* RCC_PLLSAICFGR_PLLSAIP */ -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in RCC register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) - -/** - * @brief Read a value in RCC register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) -/** - * @} - */ - -/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies - * @{ - */ - -/** - * @brief Helper macro to calculate the PLLCLK frequency on system domain - * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos ) + 1U) * 2U)) - -#if defined(RCC_PLLR_SYSCLK_SUPPORT) -/** - * @brief Helper macro to calculate the PLLRCLK frequency on system domain - * @note ex: @ref __LL_RCC_CALC_PLLRCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLRCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) - -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ - -/** - * @brief Helper macro to calculate the PLLCLK frequency used on 48M domain - * @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos )) - -#if defined(DSI) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on DSI - * @note ex: @ref __LL_RCC_CALC_PLLCLK_DSI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_DSI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* DSI */ - -#if defined(RCC_PLLR_I2S_CLKSOURCE_SUPPORT) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on I2S - * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* RCC_PLLR_I2S_CLKSOURCE_SUPPORT */ - -#if defined(SPDIFRX) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on SPDIFRX - * @note ex: @ref __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* SPDIFRX */ - -#if defined(RCC_PLLCFGR_PLLR) -#if defined(SAI1) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on SAI - * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR (), @ref LL_RCC_PLL_GetDIVR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @param __PLLDIVR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval PLL clock frequency (in Hz) - */ -#if defined(RCC_DCKCFGR_PLLDIVR) -#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__, __PLLDIVR__) (((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) / ((__PLLDIVR__) >> RCC_DCKCFGR_PLLDIVR_Pos )) -#else -#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* RCC_DCKCFGR_PLLDIVR */ -#endif /* SAI1 */ -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Helper macro to calculate the PLLSAI frequency used for SAI domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetQ (), @ref LL_RCC_PLLSAI_GetDIVQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLSAIQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - * @param __PLLSAIDIVQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIQ__, __PLLSAIDIVQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - (((__PLLSAIQ__) >> RCC_PLLSAICFGR_PLLSAIQ_Pos) * (((__PLLSAIDIVQ__) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos) + 1U))) - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Helper macro to calculate the PLLSAI frequency used on 48Mhz domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 50 and 432 - * @param __PLLSAIP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - ((((__PLLSAIP__) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) * 2U)) -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -#if defined(LTDC) -/** - * @brief Helper macro to calculate the PLLSAI frequency used for LTDC domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetR (), @ref LL_RCC_PLLSAI_GetDIVR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLSAIR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - * @param __PLLSAIDIVR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_LTDC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIR__, __PLLSAIDIVR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - (((__PLLSAIR__) >> RCC_PLLSAICFGR_PLLSAIR_Pos) * (aRCC_PLLSAIDIVRPrescTable[(__PLLSAIDIVR__) >> RCC_DCKCFGR_PLLSAIDIVR_Pos]))) -#endif /* LTDC */ -#endif /* RCC_PLLSAI_SUPPORT */ - -#if defined(RCC_PLLI2S_SUPPORT) -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) || defined(RCC_DCKCFGR_PLLI2SDIVR) -/** - * @brief Helper macro to calculate the PLLI2S frequency used for SAI domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ (), @ref LL_RCC_PLLI2S_GetDIVQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLI2SQ_R__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @param __PLLI2SDIVQ_R__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval PLLI2S clock frequency (in Hz) - */ -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ_R__, __PLLI2SDIVQ_R__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - (((__PLLI2SQ_R__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos) * (((__PLLI2SDIVQ_R__) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos) + 1U))) -#else -#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ_R__, __PLLI2SDIVQ_R__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - (((__PLLI2SQ_R__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos) * ((__PLLI2SDIVQ_R__) >> RCC_DCKCFGR_PLLI2SDIVR_Pos))) - -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_DCKCFGR_PLLI2SDIVQ || RCC_DCKCFGR_PLLI2SDIVR */ - -#if defined(SPDIFRX) -/** - * @brief Helper macro to calculate the PLLI2S frequency used on SPDIFRX domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50 and 432 - * @param __PLLI2SP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((((__PLLI2SP__) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) * 2U)) - -#endif /* SPDIFRX */ - -/** - * @brief Helper macro to calculate the PLLI2S frequency used for I2S domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_I2S_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLI2SR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((__PLLI2SR__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos)) - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Helper macro to calculate the PLLI2S frequency used for 48Mhz domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50 and 432 - * @param __PLLI2SQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((__PLLI2SQ__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos)) - -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_PLLI2S_SUPPORT */ - -/** - * @brief Helper macro to calculate the HCLK frequency - * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) - * @param __AHBPRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - * @retval HCLK clock frequency (in Hz) - */ -#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) - -/** - * @brief Helper macro to calculate the PCLK1 frequency (ABP1) - * @param __HCLKFREQ__ HCLK frequency - * @param __APB1PRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - * @retval PCLK1 clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos]) - -/** - * @brief Helper macro to calculate the PCLK2 frequency (ABP2) - * @param __HCLKFREQ__ HCLK frequency - * @param __APB2PRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - * @retval PCLK2 clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos]) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_LL_EF_HSE HSE - * @{ - */ - -/** - * @brief Enable the Clock Security System. - * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) -{ - SET_BIT(RCC->CR, RCC_CR_CSSON); -} - -/** - * @brief Enable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Disable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Enable HSE crystal oscillator (HSE ON) - * @rmtoll CR HSEON LL_RCC_HSE_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEON); -} - -/** - * @brief Disable HSE crystal oscillator (HSE ON) - * @rmtoll CR HSEON LL_RCC_HSE_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); -} - -/** - * @brief Check if HSE oscillator Ready - * @rmtoll CR HSERDY LL_RCC_HSE_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_HSI HSI - * @{ - */ - -/** - * @brief Enable HSI oscillator - * @rmtoll CR HSION LL_RCC_HSI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSION); -} - -/** - * @brief Disable HSI oscillator - * @rmtoll CR HSION LL_RCC_HSI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSION); -} - -/** - * @brief Check if HSI clock is ready - * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)); -} - -/** - * @brief Get HSI Calibration value - * @note When HSITRIM is written, HSICAL is updated with the sum of - * HSITRIM and the factory trim value - * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration - * @retval Between Min_Data = 0x00 and Max_Data = 0xFF - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) -{ - return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos); -} - -/** - * @brief Set HSI Calibration trimming - * @note user-programmable trimming value that is added to the HSICAL - * @note Default value is 16, which, when added to the HSICAL value, - * should trim the HSI to 16 MHz +/- 1 % - * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming - * @param Value Between Min_Data = 0 and Max_Data = 31 - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) -{ - MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos); -} - -/** - * @brief Get HSI Calibration trimming - * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming - * @retval Between Min_Data = 0 and Max_Data = 31 - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) -{ - return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_LSE LSE - * @{ - */ - -/** - * @brief Enable Low Speed External (LSE) crystal. - * @rmtoll BDCR LSEON LL_RCC_LSE_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_Enable(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); -} - -/** - * @brief Disable Low Speed External (LSE) crystal. - * @rmtoll BDCR LSEON LL_RCC_LSE_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_Disable(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); -} - -/** - * @brief Enable external clock source (LSE bypass). - * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); -} - -/** - * @brief Disable external clock source (LSE bypass). - * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); -} - -/** - * @brief Check if LSE oscillator Ready - * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) -{ - return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)); -} - -#if defined(RCC_BDCR_LSEMOD) -/** - * @brief Enable LSE high drive mode. - * @note LSE high drive mode can be enabled only when the LSE clock is disabled - * @rmtoll BDCR LSEMOD LL_RCC_LSE_EnableHighDriveMode - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_EnableHighDriveMode(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); -} - -/** - * @brief Disable LSE high drive mode. - * @note LSE high drive mode can be disabled only when the LSE clock is disabled - * @rmtoll BDCR LSEMOD LL_RCC_LSE_DisableHighDriveMode - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_DisableHighDriveMode(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); -} -#endif /* RCC_BDCR_LSEMOD */ - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_LSI LSI - * @{ - */ - -/** - * @brief Enable LSI Oscillator - * @rmtoll CSR LSION LL_RCC_LSI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSI_Enable(void) -{ - SET_BIT(RCC->CSR, RCC_CSR_LSION); -} - -/** - * @brief Disable LSI Oscillator - * @rmtoll CSR LSION LL_RCC_LSI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSI_Disable(void) -{ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); -} - -/** - * @brief Check if LSI is Ready - * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_System System - * @{ - */ - -/** - * @brief Configure the system clock source - * @rmtoll CFGR SW LL_RCC_SetSysClkSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE - * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL - * @arg @ref LL_RCC_SYS_CLKSOURCE_PLLR (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); -} - -/** - * @brief Get the system clock source - * @rmtoll CFGR SWS LL_RCC_GetSysClkSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLLR (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); -} - -/** - * @brief Set AHB prescaler - * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); -} - -/** - * @brief Set APB1 prescaler - * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler); -} - -/** - * @brief Set APB2 prescaler - * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler); -} - -/** - * @brief Get AHB prescaler - * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); -} - -/** - * @brief Get APB1 prescaler - * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1)); -} - -/** - * @brief Get APB2 prescaler - * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_MCO MCO - * @{ - */ - -#if defined(RCC_CFGR_MCO1EN) -/** - * @brief Enable MCO1 output - * @rmtoll CFGR RCC_CFGR_MCO1EN LL_RCC_MCO1_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO1_Enable(void) -{ - SET_BIT(RCC->CFGR, RCC_CFGR_MCO1EN); -} - -/** - * @brief Disable MCO1 output - * @rmtoll CFGR RCC_CFGR_MCO1EN LL_RCC_MCO1_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO1_Disable(void) -{ - CLEAR_BIT(RCC->CFGR, RCC_CFGR_MCO1EN); -} -#endif /* RCC_CFGR_MCO1EN */ - -#if defined(RCC_CFGR_MCO2EN) -/** - * @brief Enable MCO2 output - * @rmtoll CFGR RCC_CFGR_MCO2EN LL_RCC_MCO2_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO2_Enable(void) -{ - SET_BIT(RCC->CFGR, RCC_CFGR_MCO2EN); -} - -/** - * @brief Disable MCO2 output - * @rmtoll CFGR RCC_CFGR_MCO2EN LL_RCC_MCO2_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO2_Disable(void) -{ - CLEAR_BIT(RCC->CFGR, RCC_CFGR_MCO2EN); -} -#endif /* RCC_CFGR_MCO2EN */ - -/** - * @brief Configure MCOx - * @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n - * CFGR MCO1PRE LL_RCC_ConfigMCO\n - * CFGR MCO2 LL_RCC_ConfigMCO\n - * CFGR MCO2PRE LL_RCC_ConfigMCO - * @param MCOxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_MCO1SOURCE_HSI - * @arg @ref LL_RCC_MCO1SOURCE_LSE - * @arg @ref LL_RCC_MCO1SOURCE_HSE - * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK - * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK - * @arg @ref LL_RCC_MCO2SOURCE_PLLI2S - * @arg @ref LL_RCC_MCO2SOURCE_HSE - * @arg @ref LL_RCC_MCO2SOURCE_PLLCLK - * @param MCOxPrescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_MCO1_DIV_1 - * @arg @ref LL_RCC_MCO1_DIV_2 - * @arg @ref LL_RCC_MCO1_DIV_3 - * @arg @ref LL_RCC_MCO1_DIV_4 - * @arg @ref LL_RCC_MCO1_DIV_5 - * @arg @ref LL_RCC_MCO2_DIV_1 - * @arg @ref LL_RCC_MCO2_DIV_2 - * @arg @ref LL_RCC_MCO2_DIV_3 - * @arg @ref LL_RCC_MCO2_DIV_4 - * @arg @ref LL_RCC_MCO2_DIV_5 - * @retval None - */ -__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) -{ - MODIFY_REG(RCC->CFGR, (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U), (MCOxSource << 16U) | (MCOxPrescaler << 16U)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source - * @{ - */ -#if defined(FMPI2C1) -/** - * @brief Configure FMPI2C clock source - * @rmtoll DCKCFGR2 FMPI2C1SEL LL_RCC_SetFMPI2CClockSource - * @param FMPI2CxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_HSI - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetFMPI2CClockSource(uint32_t FMPI2CxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, FMPI2CxSource); -} -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** - * @brief Configure LPTIMx clock source - * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_SetLPTIMClockSource - * @param LPTIMxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, LPTIMxSource); -} -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** - * @brief Configure SAIx clock source - * @rmtoll DCKCFGR SAI1SRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI2SRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI1ASRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI1BSRC LL_RCC_SetSAIClockSource - * @param SAIxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource) -{ - MODIFY_REG(RCC->DCKCFGR, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U)); -} -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** - * @brief Configure SDIO clock source - * @rmtoll DCKCFGR SDIOSEL LL_RCC_SetSDIOClockSource\n - * DCKCFGR2 SDIOSEL LL_RCC_SetSDIOClockSource - * @param SDIOxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE_PLL48CLK - * @arg @ref LL_RCC_SDIO_CLKSOURCE_SYSCLK - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSDIOClockSource(uint32_t SDIOxSource) -{ -#if defined(RCC_DCKCFGR_SDIOSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, SDIOxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, SDIOxSource); -#endif /* RCC_DCKCFGR_SDIOSEL */ -} -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** - * @brief Configure 48Mhz domain clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetCK48MClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetCK48MClockSource - * @param CK48MxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetCK48MClockSource(uint32_t CK48MxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, CK48MxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, CK48MxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} - -#if defined(RNG) -/** - * @brief Configure RNG clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetRNGClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetRNGClockSource - * @param RNGxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, RNGxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, RNGxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** - * @brief Configure USB clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetUSBClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetUSBClockSource - * @param USBxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, USBxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, USBxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* USB_OTG_FS || USB_OTG_HS */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(CEC) -/** - * @brief Configure CEC clock source - * @rmtoll DCKCFGR2 CECSEL LL_RCC_SetCECClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 - * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, Source); -} -#endif /* CEC */ - -/** - * @brief Configure I2S clock source - * @rmtoll CFGR I2SSRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2SSRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2S1SRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2S2SRC LL_RCC_SetI2SClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t Source) -{ -#if defined(RCC_CFGR_I2SSRC) - MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, Source); -#else - MODIFY_REG(RCC->DCKCFGR, (Source & 0xFFFF0000U), (Source << 16U)); -#endif /* RCC_CFGR_I2SSRC */ -} - -#if defined(DSI) -/** - * @brief Configure DSI clock source - * @rmtoll DCKCFGR DSISEL LL_RCC_SetDSIClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY - * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, Source); -} -#endif /* DSI */ - -#if defined(DFSDM1_Channel0) -/** - * @brief Configure DFSDM Audio clock source - * @rmtoll DCKCFGR CKDFSDM1ASEL LL_RCC_SetDFSDMAudioClockSource\n - * DCKCFGR CKDFSDM2ASEL LL_RCC_SetDFSDMAudioClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (*) - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, (Source & 0x0000FFFFU), (Source >> 16U)); -} - -/** - * @brief Configure DFSDM Kernel clock source - * @rmtoll DCKCFGR CKDFSDM1SEL LL_RCC_SetDFSDMClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK2 (*) - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, Source); -} -#endif /* DFSDM1_Channel0 */ - -#if defined(SPDIFRX) -/** - * @brief Configure SPDIFRX clock source - * @rmtoll DCKCFGR2 SPDIFRXSEL LL_RCC_SetSPDIFRXClockSource - * @param SPDIFRXxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLL - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSPDIFRXClockSource(uint32_t SPDIFRXxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, SPDIFRXxSource); -} -#endif /* SPDIFRX */ - -#if defined(FMPI2C1) -/** - * @brief Get FMPI2C clock source - * @rmtoll DCKCFGR2 FMPI2C1SEL LL_RCC_GetFMPI2CClockSource - * @param FMPI2Cx This parameter can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_HSI - */ -__STATIC_INLINE uint32_t LL_RCC_GetFMPI2CClockSource(uint32_t FMPI2Cx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, FMPI2Cx)); -} -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** - * @brief Get LPTIMx clock source - * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_GetLPTIMClockSource - * @param LPTIMx This parameter can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)); -} -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** - * @brief Get SAIx clock source - * @rmtoll DCKCFGR SAI1SEL LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI2SEL LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI1ASRC LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI1BSRC LL_RCC_GetSAIClockSource - * @param SAIx This parameter can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, SAIx) >> 16U | SAIx); -} -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** - * @brief Get SDIOx clock source - * @rmtoll DCKCFGR SDIOSEL LL_RCC_GetSDIOClockSource\n - * DCKCFGR2 SDIOSEL LL_RCC_GetSDIOClockSource - * @param SDIOx This parameter can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE_PLL48CLK - * @arg @ref LL_RCC_SDIO_CLKSOURCE_SYSCLK - */ -__STATIC_INLINE uint32_t LL_RCC_GetSDIOClockSource(uint32_t SDIOx) -{ -#if defined(RCC_DCKCFGR_SDIOSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, SDIOx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SDIOx)); -#endif /* RCC_DCKCFGR_SDIOSEL */ -} -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** - * @brief Get 48Mhz domain clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetCK48MClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetCK48MClockSource - * @param CK48Mx This parameter can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetCK48MClockSource(uint32_t CK48Mx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, CK48Mx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CK48Mx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} - -#if defined(RNG) -/** - * @brief Get RNGx clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetRNGClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetRNGClockSource - * @param RNGx This parameter can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RNGx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RNGx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** - * @brief Get USBx clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetUSBClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetUSBClockSource - * @param USBx This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, USBx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, USBx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* USB_OTG_FS || USB_OTG_HS */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(CEC) -/** - * @brief Get CEC Clock Source - * @rmtoll DCKCFGR2 CECSEL LL_RCC_GetCECClockSource - * @param CECx This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 - * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CECx)); -} -#endif /* CEC */ - -/** - * @brief Get I2S Clock Source - * @rmtoll CFGR I2SSRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2SSRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2S1SRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2S2SRC LL_RCC_GetI2SClockSource - * @param I2Sx This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE - * @arg @ref LL_RCC_I2S2_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) -{ -#if defined(RCC_CFGR_I2SSRC) - return (uint32_t)(READ_BIT(RCC->CFGR, I2Sx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR, I2Sx) >> 16U | I2Sx); -#endif /* RCC_CFGR_I2SSRC */ -} - -#if defined(DFSDM1_Channel0) -/** - * @brief Get DFSDM Audio Clock Source - * @rmtoll DCKCFGR CKDFSDM1ASEL LL_RCC_GetDFSDMAudioClockSource\n - * DCKCFGR CKDFSDM2ASEL LL_RCC_GetDFSDMAudioClockSource - * @param DFSDMx This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (*) - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DFSDMx) << 16U | DFSDMx); -} - -/** - * @brief Get DFSDM Audio Clock Source - * @rmtoll DCKCFGR CKDFSDM1SEL LL_RCC_GetDFSDMClockSource - * @param DFSDMx This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK2 (*) - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DFSDMx)); -} -#endif /* DFSDM1_Channel0 */ - -#if defined(SPDIFRX) -/** - * @brief Get SPDIFRX clock source - * @rmtoll DCKCFGR2 SPDIFRXSEL LL_RCC_GetSPDIFRXClockSource - * @param SPDIFRXx This parameter can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLL - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSPDIFRXClockSource(uint32_t SPDIFRXx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SPDIFRXx)); -} -#endif /* SPDIFRX */ - -#if defined(DSI) -/** - * @brief Get DSI Clock Source - * @rmtoll DCKCFGR DSISEL LL_RCC_GetDSIClockSource - * @param DSIx This parameter can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY - * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL - */ -__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DSIx)); -} -#endif /* DSI */ - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_RTC RTC - * @{ - */ - -/** - * @brief Set RTC Clock Source - * @note Once the RTC clock source has been selected, it cannot be changed anymore unless - * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is - * set). The BDRST bit can be used to reset them. - * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI - * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); -} - -/** - * @brief Get RTC Clock Source - * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI - * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) -{ - return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); -} - -/** - * @brief Enable RTC - * @rmtoll BDCR RTCEN LL_RCC_EnableRTC - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableRTC(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); -} - -/** - * @brief Disable RTC - * @rmtoll BDCR RTCEN LL_RCC_DisableRTC - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableRTC(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); -} - -/** - * @brief Check if RTC has been enabled or not - * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) -{ - return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)); -} - -/** - * @brief Force the Backup domain reset - * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset - * @retval None - */ -__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); -} - -/** - * @brief Release the Backup domain reset - * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset - * @retval None - */ -__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); -} - -/** - * @brief Set HSE Prescalers for RTC Clock - * @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_RTC_NOCLOCK - * @arg @ref LL_RCC_RTC_HSE_DIV_2 - * @arg @ref LL_RCC_RTC_HSE_DIV_3 - * @arg @ref LL_RCC_RTC_HSE_DIV_4 - * @arg @ref LL_RCC_RTC_HSE_DIV_5 - * @arg @ref LL_RCC_RTC_HSE_DIV_6 - * @arg @ref LL_RCC_RTC_HSE_DIV_7 - * @arg @ref LL_RCC_RTC_HSE_DIV_8 - * @arg @ref LL_RCC_RTC_HSE_DIV_9 - * @arg @ref LL_RCC_RTC_HSE_DIV_10 - * @arg @ref LL_RCC_RTC_HSE_DIV_11 - * @arg @ref LL_RCC_RTC_HSE_DIV_12 - * @arg @ref LL_RCC_RTC_HSE_DIV_13 - * @arg @ref LL_RCC_RTC_HSE_DIV_14 - * @arg @ref LL_RCC_RTC_HSE_DIV_15 - * @arg @ref LL_RCC_RTC_HSE_DIV_16 - * @arg @ref LL_RCC_RTC_HSE_DIV_17 - * @arg @ref LL_RCC_RTC_HSE_DIV_18 - * @arg @ref LL_RCC_RTC_HSE_DIV_19 - * @arg @ref LL_RCC_RTC_HSE_DIV_20 - * @arg @ref LL_RCC_RTC_HSE_DIV_21 - * @arg @ref LL_RCC_RTC_HSE_DIV_22 - * @arg @ref LL_RCC_RTC_HSE_DIV_23 - * @arg @ref LL_RCC_RTC_HSE_DIV_24 - * @arg @ref LL_RCC_RTC_HSE_DIV_25 - * @arg @ref LL_RCC_RTC_HSE_DIV_26 - * @arg @ref LL_RCC_RTC_HSE_DIV_27 - * @arg @ref LL_RCC_RTC_HSE_DIV_28 - * @arg @ref LL_RCC_RTC_HSE_DIV_29 - * @arg @ref LL_RCC_RTC_HSE_DIV_30 - * @arg @ref LL_RCC_RTC_HSE_DIV_31 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler); -} - -/** - * @brief Get HSE Prescalers for RTC Clock - * @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RTC_NOCLOCK - * @arg @ref LL_RCC_RTC_HSE_DIV_2 - * @arg @ref LL_RCC_RTC_HSE_DIV_3 - * @arg @ref LL_RCC_RTC_HSE_DIV_4 - * @arg @ref LL_RCC_RTC_HSE_DIV_5 - * @arg @ref LL_RCC_RTC_HSE_DIV_6 - * @arg @ref LL_RCC_RTC_HSE_DIV_7 - * @arg @ref LL_RCC_RTC_HSE_DIV_8 - * @arg @ref LL_RCC_RTC_HSE_DIV_9 - * @arg @ref LL_RCC_RTC_HSE_DIV_10 - * @arg @ref LL_RCC_RTC_HSE_DIV_11 - * @arg @ref LL_RCC_RTC_HSE_DIV_12 - * @arg @ref LL_RCC_RTC_HSE_DIV_13 - * @arg @ref LL_RCC_RTC_HSE_DIV_14 - * @arg @ref LL_RCC_RTC_HSE_DIV_15 - * @arg @ref LL_RCC_RTC_HSE_DIV_16 - * @arg @ref LL_RCC_RTC_HSE_DIV_17 - * @arg @ref LL_RCC_RTC_HSE_DIV_18 - * @arg @ref LL_RCC_RTC_HSE_DIV_19 - * @arg @ref LL_RCC_RTC_HSE_DIV_20 - * @arg @ref LL_RCC_RTC_HSE_DIV_21 - * @arg @ref LL_RCC_RTC_HSE_DIV_22 - * @arg @ref LL_RCC_RTC_HSE_DIV_23 - * @arg @ref LL_RCC_RTC_HSE_DIV_24 - * @arg @ref LL_RCC_RTC_HSE_DIV_25 - * @arg @ref LL_RCC_RTC_HSE_DIV_26 - * @arg @ref LL_RCC_RTC_HSE_DIV_27 - * @arg @ref LL_RCC_RTC_HSE_DIV_28 - * @arg @ref LL_RCC_RTC_HSE_DIV_29 - * @arg @ref LL_RCC_RTC_HSE_DIV_30 - * @arg @ref LL_RCC_RTC_HSE_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)); -} - -/** - * @} - */ - -#if defined(RCC_DCKCFGR_TIMPRE) -/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM - * @{ - */ - -/** - * @brief Set Timers Clock Prescalers - * @rmtoll DCKCFGR TIMPRE LL_RCC_SetTIMPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_TIM_PRESCALER_TWICE - * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_TIMPRE, Prescaler); -} - -/** - * @brief Get Timers Clock Prescalers - * @rmtoll DCKCFGR TIMPRE LL_RCC_GetTIMPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_TIM_PRESCALER_TWICE - * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES - */ -__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_TIMPRE)); -} - -/** - * @} - */ -#endif /* RCC_DCKCFGR_TIMPRE */ - -/** @defgroup RCC_LL_EF_PLL PLL - * @{ - */ - -/** - * @brief Enable PLL - * @rmtoll CR PLLON LL_RCC_PLL_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLON); -} - -/** - * @brief Disable PLL - * @note Cannot be disabled if the PLL clock is used as the system clock - * @rmtoll CR PLLON LL_RCC_PLL_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLON); -} - -/** - * @brief Check if PLL Ready - * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)); -} - -/** - * @brief Configure PLL used for SYSCLK Domain - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLL is disabled - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SYS - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLP_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - * @arg @ref LL_RCC_PLLR_DIV_2 (*) - * @arg @ref LL_RCC_PLLR_DIV_3 (*) - * @arg @ref LL_RCC_PLLR_DIV_4 (*) - * @arg @ref LL_RCC_PLLR_DIV_5 (*) - * @arg @ref LL_RCC_PLLR_DIV_6 (*) - * @arg @ref LL_RCC_PLLR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP_R) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos); - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLP, PLLP_R); -#if defined(RCC_PLLR_SYSCLK_SUPPORT) - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLR, PLLP_R); -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ -} - -/** - * @brief Configure PLL used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLL is disabled - * @note This can be selected for USB, RNG, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLQ); -} - -#if defined(DSI) -/** - * @brief Configure PLL used for DSI clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for DSI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_DSI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* DSI */ - -#if defined(RCC_PLLR_I2S_CLKSOURCE_SUPPORT) -/** - * @brief Configure PLL used for I2S clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for I2S - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_I2S - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* RCC_PLLR_I2S_CLKSOURCE_SUPPORT */ - -#if defined(SPDIFRX) -/** - * @brief Configure PLL used for SPDIFRX clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for SPDIFRX - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SPDIFRX - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* SPDIFRX */ - -#if defined(RCC_PLLCFGR_PLLR) -#if defined(SAI1) -/** - * @brief Configure PLL used for SAI clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SAI\n - * DCKCFGR PLLDIVR LL_RCC_PLL_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @param PLLDIVR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -#if defined(RCC_DCKCFGR_PLLDIVR) -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) -#else -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -#endif /* RCC_DCKCFGR_PLLDIVR */ -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -#if defined(RCC_DCKCFGR_PLLDIVR) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR, PLLDIVR); -#endif /* RCC_DCKCFGR_PLLDIVR */ -} -#endif /* SAI1 */ -#endif /* RCC_PLLCFGR_PLLR */ - -/** - * @brief Configure PLL clock source - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource - * @param PLLSource This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); -} - -/** - * @brief Get the oscillator used as PLL clock source. - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); -} - -/** - * @brief Get Main PLL multiplication factor for VCO - * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN - * @retval Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); -} - -/** - * @brief Get Main PLL division factor for PLLP - * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP)); -} - -/** - * @brief Get Main PLL division factor for PLLQ - * @note used for PLL48MCLK selected for USB, RNG, SDIO (48 MHz clock) - * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ)); -} - -#if defined(RCC_PLLCFGR_PLLR) -/** - * @brief Get Main PLL division factor for PLLR - * @note used for PLLCLK (system clock) - * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR)); -} -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_DCKCFGR_PLLDIVR) -/** - * @brief Get Main PLL division factor for PLLDIVR - * @note used for PLLSAICLK (SAI1 and SAI2 clock) - * @rmtoll DCKCFGR PLLDIVR LL_RCC_PLL_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 - * @arg @ref LL_RCC_PLLDIVR_DIV_2 - * @arg @ref LL_RCC_PLLDIVR_DIV_3 - * @arg @ref LL_RCC_PLLDIVR_DIV_4 - * @arg @ref LL_RCC_PLLDIVR_DIV_5 - * @arg @ref LL_RCC_PLLDIVR_DIV_6 - * @arg @ref LL_RCC_PLLDIVR_DIV_7 - * @arg @ref LL_RCC_PLLDIVR_DIV_8 - * @arg @ref LL_RCC_PLLDIVR_DIV_9 - * @arg @ref LL_RCC_PLLDIVR_DIV_10 - * @arg @ref LL_RCC_PLLDIVR_DIV_11 - * @arg @ref LL_RCC_PLLDIVR_DIV_12 - * @arg @ref LL_RCC_PLLDIVR_DIV_13 - * @arg @ref LL_RCC_PLLDIVR_DIV_14 - * @arg @ref LL_RCC_PLLDIVR_DIV_15 - * @arg @ref LL_RCC_PLLDIVR_DIV_16 - * @arg @ref LL_RCC_PLLDIVR_DIV_17 - * @arg @ref LL_RCC_PLLDIVR_DIV_18 - * @arg @ref LL_RCC_PLLDIVR_DIV_19 - * @arg @ref LL_RCC_PLLDIVR_DIV_20 - * @arg @ref LL_RCC_PLLDIVR_DIV_21 - * @arg @ref LL_RCC_PLLDIVR_DIV_22 - * @arg @ref LL_RCC_PLLDIVR_DIV_23 - * @arg @ref LL_RCC_PLLDIVR_DIV_24 - * @arg @ref LL_RCC_PLLDIVR_DIV_25 - * @arg @ref LL_RCC_PLLDIVR_DIV_26 - * @arg @ref LL_RCC_PLLDIVR_DIV_27 - * @arg @ref LL_RCC_PLLDIVR_DIV_28 - * @arg @ref LL_RCC_PLLDIVR_DIV_29 - * @arg @ref LL_RCC_PLLDIVR_DIV_30 - * @arg @ref LL_RCC_PLLDIVR_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR)); -} -#endif /* RCC_DCKCFGR_PLLDIVR */ - -/** - * @brief Get Division factor for the main PLL and other PLL - * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -} - -/** - * @brief Configure Spread Spectrum used for PLL - * @note These bits must be written before enabling PLL - * @rmtoll SSCGR MODPER LL_RCC_PLL_ConfigSpreadSpectrum\n - * SSCGR INCSTEP LL_RCC_PLL_ConfigSpreadSpectrum\n - * SSCGR SPREADSEL LL_RCC_PLL_ConfigSpreadSpectrum - * @param Mod Between Min_Data=0 and Max_Data=8191 - * @param Inc Between Min_Data=0 and Max_Data=32767 - * @param Sel This parameter can be one of the following values: - * @arg @ref LL_RCC_SPREAD_SELECT_CENTER - * @arg @ref LL_RCC_SPREAD_SELECT_DOWN - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigSpreadSpectrum(uint32_t Mod, uint32_t Inc, uint32_t Sel) -{ - MODIFY_REG(RCC->SSCGR, RCC_SSCGR_MODPER | RCC_SSCGR_INCSTEP | RCC_SSCGR_SPREADSEL, Mod | (Inc << RCC_SSCGR_INCSTEP_Pos) | Sel); -} - -/** - * @brief Get Spread Spectrum Modulation Period for PLL - * @rmtoll SSCGR MODPER LL_RCC_PLL_GetPeriodModulation - * @retval Between Min_Data=0 and Max_Data=8191 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetPeriodModulation(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_MODPER)); -} - -/** - * @brief Get Spread Spectrum Incrementation Step for PLL - * @note Must be written before enabling PLL - * @rmtoll SSCGR INCSTEP LL_RCC_PLL_GetStepIncrementation - * @retval Between Min_Data=0 and Max_Data=32767 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetStepIncrementation(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_INCSTEP) >> RCC_SSCGR_INCSTEP_Pos); -} - -/** - * @brief Get Spread Spectrum Selection for PLL - * @note Must be written before enabling PLL - * @rmtoll SSCGR SPREADSEL LL_RCC_PLL_GetSpreadSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SPREAD_SELECT_CENTER - * @arg @ref LL_RCC_SPREAD_SELECT_DOWN - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetSpreadSelection(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_SPREADSEL)); -} - -/** - * @brief Enable Spread Spectrum for PLL. - * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Enable(void) -{ - SET_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN); -} - -/** - * @brief Disable Spread Spectrum for PLL. - * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Disable(void) -{ - CLEAR_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN); -} - -/** - * @} - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** @defgroup RCC_LL_EF_PLLI2S PLLI2S - * @{ - */ - -/** - * @brief Enable PLLI2S - * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLI2SON); -} - -/** - * @brief Disable PLLI2S - * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); -} - -/** - * @brief Check if PLLI2S Ready - * @rmtoll CR PLLI2SRDY LL_RCC_PLLI2S_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) == (RCC_CR_PLLI2SRDY)); -} - -#if (defined(RCC_DCKCFGR_PLLI2SDIVQ) || defined(RCC_DCKCFGR_PLLI2SDIVR)) -/** - * @brief Configure PLLI2S used for SAI domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ/PLLR can be written only when PLLI2S is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_SAI\n - * DCKCFGR PLLI2SDIVQ LL_RCC_PLLI2S_ConfigDomain_SAI\n - * DCKCFGR PLLI2SDIVR LL_RCC_PLLI2S_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @param PLLDIVQ_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ_R, uint32_t PLLDIVQ_R) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos); -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ, PLLQ_R); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, PLLDIVQ_R); -#else - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR, PLLQ_R); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR, PLLDIVQ_R); -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ -} -#endif /* RCC_DCKCFGR_PLLI2SDIVQ && RCC_DCKCFGR_PLLI2SDIVR */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Configure PLLI2S used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLLI2S is disabled - * @note This can be selected for RNG, USB, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SQ, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLQ); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(SPDIFRX) -/** - * @brief Configure PLLI2S used for SPDIFRX domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLLI2S is disabled - * @note This can be selected for SPDIFRX - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_ConfigDomain_SPDIFRX - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLP This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SP, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLP); -} -#endif /* SPDIFRX */ - -/** - * @brief Configure PLLI2S used for I2S1 domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLR can be written only when PLLI2S is disabled - * @note This can be selected for I2S - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_I2S - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SR, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLR); -} - -/** - * @brief Get I2SPLL multiplication factor for VCO - * @rmtoll PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_GetN - * @retval Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); -} - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) -/** - * @brief Get I2SPLL division factor for PLLI2SQ - * @rmtoll PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ)); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - -/** - * @brief Get I2SPLL division factor for PLLI2SR - * @note used for PLLI2SCLK (I2S clock) - * @rmtoll PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR)); -} - -#if defined(RCC_PLLI2SCFGR_PLLI2SP) -/** - * @brief Get I2SPLL division factor for PLLI2SP - * @note used for PLLSPDIFRXCLK (SPDIFRX clock) - * @rmtoll PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SP)); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Get I2SPLL division factor for PLLI2SDIVQ - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLI2SDIVQ LL_RCC_PLLI2S_GetDIVQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVQ(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ)); -} -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVR) -/** - * @brief Get I2SPLL division factor for PLLI2SDIVR - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLI2SDIVR LL_RCC_PLLI2S_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR)); -} -#endif /* RCC_DCKCFGR_PLLI2SDIVR */ - -/** - * @brief Get division factor for PLLI2S input clock - * @rmtoll PLLCFGR PLLM LL_RCC_PLLI2S_GetDivider\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDivider(void) -{ -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM)); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -} - -/** - * @brief Get the oscillator used as PLL clock source. - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_GetMainSource\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_GetMainSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetMainSource(void) -{ -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) - uint32_t pllsrc = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); - uint32_t plli2sssrc0 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC); - uint32_t plli2sssrc1 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC) >> 15U; - return (uint32_t)(pllsrc | plli2sssrc0 | plli2sssrc1); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ -} - -/** - * @} - */ -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** @defgroup RCC_LL_EF_PLLSAI PLLSAI - * @{ - */ - -/** - * @brief Enable PLLSAI - * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLSAION); -} - -/** - * @brief Disable PLLSAI - * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); -} - -/** - * @brief Check if PLLSAI Ready - * @rmtoll CR PLLSAIRDY LL_RCC_PLLSAI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) == (RCC_CR_PLLSAIRDY)); -} - -/** - * @brief Configure PLLSAI used for SAI domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLLSAI is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_ConfigDomain_SAI\n - * DCKCFGR PLLSAIDIVQ LL_RCC_PLLSAI_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - * @param PLLDIVQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ, uint32_t PLLDIVQ) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIQ, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLQ); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, PLLDIVQ); -} - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Configure PLLSAI used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLLSAI is disabled - * @note This can be selected for USB, RNG, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLP This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIP, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLP); -} -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -#if defined(LTDC) -/** - * @brief Configure PLLSAI used for LTDC domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLR can be written only when PLLSAI is disabled - * @note This can be selected for LTDC - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * DCKCFGR PLLSAIDIVR LL_RCC_PLLSAI_ConfigDomain_LTDC - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - * @param PLLDIVR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIR, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLR); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, PLLDIVR); -} -#endif /* LTDC */ - -/** - * @brief Get division factor for PLLSAI input clock - * @rmtoll PLLCFGR PLLM LL_RCC_PLLSAI_GetDivider\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDivider(void) -{ -#if defined(RCC_PLLSAICFGR_PLLSAIM) - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM)); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -} - -/** - * @brief Get SAIPLL multiplication factor for VCO - * @rmtoll PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_GetN - * @retval Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); -} - -/** - * @brief Get SAIPLL division factor for PLLSAIQ - * @rmtoll PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIQ)); -} - -#if defined(RCC_PLLSAICFGR_PLLSAIR) -/** - * @brief Get SAIPLL division factor for PLLSAIR - * @note used for PLLSAICLK (SAI clock) - * @rmtoll PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIR)); -} -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Get SAIPLL division factor for PLLSAIP - * @note used for PLL48MCLK (48M domain clock) - * @rmtoll PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIP)); -} -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -/** - * @brief Get SAIPLL division factor for PLLSAIDIVQ - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLSAIDIVQ LL_RCC_PLLSAI_GetDIVQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVQ(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ)); -} - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -/** - * @brief Get SAIPLL division factor for PLLSAIDIVR - * @note used for LTDC domain clock - * @rmtoll DCKCFGR PLLSAIDIVR LL_RCC_PLLSAI_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR)); -} -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -/** - * @} - */ -#endif /* RCC_PLLSAI_SUPPORT */ - -/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management - * @{ - */ - -/** - * @brief Clear LSI ready interrupt flag - * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC); -} - -/** - * @brief Clear LSE ready interrupt flag - * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSERDYC); -} - -/** - * @brief Clear HSI ready interrupt flag - * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC); -} - -/** - * @brief Clear HSE ready interrupt flag - * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSERDYC); -} - -/** - * @brief Clear PLL ready interrupt flag - * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Clear PLLI2S ready interrupt flag - * @rmtoll CIR PLLI2SRDYC LL_RCC_ClearFlag_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLI2SRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Clear PLLSAI ready interrupt flag - * @rmtoll CIR PLLSAIRDYC LL_RCC_ClearFlag_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); -} - -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Clear Clock security system interrupt flag - * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_CSSC); -} - -/** - * @brief Check if LSI ready interrupt occurred or not - * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF)); -} - -/** - * @brief Check if LSE ready interrupt occurred or not - * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF)); -} - -/** - * @brief Check if HSI ready interrupt occurred or not - * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF)); -} - -/** - * @brief Check if HSE ready interrupt occurred or not - * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF)); -} - -/** - * @brief Check if PLL ready interrupt occurred or not - * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF)); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Check if PLLI2S ready interrupt occurred or not - * @rmtoll CIR PLLI2SRDYF LL_RCC_IsActiveFlag_PLLI2SRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLI2SRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYF) == (RCC_CIR_PLLI2SRDYF)); -} -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Check if PLLSAI ready interrupt occurred or not - * @rmtoll CIR PLLSAIRDYF LL_RCC_IsActiveFlag_PLLSAIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYF) == (RCC_CIR_PLLSAIRDYF)); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Check if Clock security system interrupt occurred or not - * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF)); -} - -/** - * @brief Check if RCC flag Independent Watchdog reset is set or not. - * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)); -} - -/** - * @brief Check if RCC flag Low Power reset is set or not. - * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)); -} - -/** - * @brief Check if RCC flag Pin reset is set or not. - * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)); -} - -/** - * @brief Check if RCC flag POR/PDR reset is set or not. - * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)); -} - -/** - * @brief Check if RCC flag Software reset is set or not. - * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)); -} - -/** - * @brief Check if RCC flag Window Watchdog reset is set or not. - * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)); -} - -#if defined(RCC_CSR_BORRSTF) -/** - * @brief Check if RCC flag BOR reset is set or not. - * @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == (RCC_CSR_BORRSTF)); -} -#endif /* RCC_CSR_BORRSTF */ - -/** - * @brief Set RMVF bit to clear the reset flags. - * @rmtoll CSR RMVF LL_RCC_ClearResetFlags - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearResetFlags(void) -{ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_IT_Management IT Management - * @{ - */ - -/** - * @brief Enable LSI ready interrupt - * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); -} - -/** - * @brief Enable LSE ready interrupt - * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE); -} - -/** - * @brief Enable HSI ready interrupt - * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); -} - -/** - * @brief Enable HSE ready interrupt - * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE); -} - -/** - * @brief Enable PLL ready interrupt - * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Enable PLLI2S ready interrupt - * @rmtoll CIR PLLI2SRDYIE LL_RCC_EnableIT_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLI2SRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -} -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Enable PLLSAI ready interrupt - * @rmtoll CIR PLLSAIRDYIE LL_RCC_EnableIT_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLSAIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Disable LSI ready interrupt - * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); -} - -/** - * @brief Disable LSE ready interrupt - * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE); -} - -/** - * @brief Disable HSI ready interrupt - * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); -} - -/** - * @brief Disable HSE ready interrupt - * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE); -} - -/** - * @brief Disable PLL ready interrupt - * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Disable PLLI2S ready interrupt - * @rmtoll CIR PLLI2SRDYIE LL_RCC_DisableIT_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLI2SRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Disable PLLSAI ready interrupt - * @rmtoll CIR PLLSAIRDYIE LL_RCC_DisableIT_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLSAIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Checks if LSI ready interrupt source is enabled or disabled. - * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE)); -} - -/** - * @brief Checks if LSE ready interrupt source is enabled or disabled. - * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE)); -} - -/** - * @brief Checks if HSI ready interrupt source is enabled or disabled. - * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE)); -} - -/** - * @brief Checks if HSE ready interrupt source is enabled or disabled. - * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE)); -} - -/** - * @brief Checks if PLL ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE)); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Checks if PLLI2S ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLI2SRDYIE LL_RCC_IsEnabledIT_PLLI2SRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLI2SRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE) == (RCC_CIR_PLLI2SRDYIE)); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Checks if PLLSAI ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLSAIRDYIE LL_RCC_IsEnabledIT_PLLSAIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE) == (RCC_CIR_PLLSAIRDYIE)); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_EF_Init De-initialization function - * @{ - */ -ErrorStatus LL_RCC_DeInit(void); -/** - * @} - */ - -/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions - * @{ - */ -void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); -#if defined(FMPI2C1) -uint32_t LL_RCC_GetFMPI2CClockFreq(uint32_t FMPI2CxSource); -#endif /* FMPI2C1 */ -#if defined(LPTIM1) -uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); -#endif /* LPTIM1 */ -#if defined(SAI1) -uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); -#endif /* SAI1 */ -#if defined(SDIO) -uint32_t LL_RCC_GetSDIOClockFreq(uint32_t SDIOxSource); -#endif /* SDIO */ -#if defined(RNG) -uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); -#endif /* RNG */ -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); -#endif /* USB_OTG_FS || USB_OTG_HS */ -#if defined(DFSDM1_Channel0) -uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource); -uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource); -#endif /* DFSDM1_Channel0 */ -uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); -#if defined(CEC) -uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); -#endif /* CEC */ -#if defined(LTDC) -uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource); -#endif /* LTDC */ -#if defined(SPDIFRX) -uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource); -#endif /* SPDIFRX */ -#if defined(DSI) -uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource); -#endif /* DSI */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RCC) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_RCC_H */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h deleted file mode 100644 index 84ea5c4..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h +++ /dev/null @@ -1,1711 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_system.h - * @author MCD Application Team - * @brief Header file of SYSTEM LL module. - * - ****************************************************************************** - * @attention - * - *Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LL SYSTEM driver contains a set of generic APIs that can be - used by user: - (+) Some of the FLASH features need to be handled in the SYSTEM file. - (+) Access to DBGCMU registers - (+) Access to SYSCFG registers - - @endverbatim - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_SYSTEM_H -#define __STM32F4xx_LL_SYSTEM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) - -/** @defgroup SYSTEM_LL SYSTEM - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants - * @{ - */ - -/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP -* @{ -*/ -#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000 /*!< Main Flash memory mapped at 0x00000000 */ -#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ -#if defined(FSMC_Bank1) -#define LL_SYSCFG_REMAP_FSMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FSMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */ -#endif /* FSMC_Bank1 */ -#if defined(FMC_Bank1) -#define LL_SYSCFG_REMAP_FMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */ -#define LL_SYSCFG_REMAP_SDRAM SYSCFG_MEMRMP_MEM_MODE_2 /*!< FMC/SDRAM mapped at 0x00000000 */ -#endif /* FMC_Bank1 */ -#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */ - -/** - * @} - */ - -#if defined(SYSCFG_PMC_MII_RMII_SEL) - /** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC -* @{ -*/ -#define LL_SYSCFG_PMC_ETHMII (uint32_t)0x00000000 /*!< ETH Media MII interface */ -#define LL_SYSCFG_PMC_ETHRMII (uint32_t)SYSCFG_PMC_MII_RMII_SEL /*!< ETH Media RMII interface */ - -/** - * @} - */ -#endif /* SYSCFG_PMC_MII_RMII_SEL */ - - - -#if defined(SYSCFG_MEMRMP_UFB_MODE) -/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE - * @{ - */ -#define LL_SYSCFG_BANKMODE_BANK1 (uint32_t)0x00000000 /*!< Flash Bank 1 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000 (TCM) - and Flash Bank 2 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000 (TCM)*/ -#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_UFB_MODE /*!< Flash Bank 2 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000(TCM) - and Flash Bank 1 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000(TCM) */ -/** - * @} - */ -#endif /* SYSCFG_MEMRMP_UFB_MODE */ -/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS - * @{ - */ -#if defined(SYSCFG_CFGR_FMPI2C1_SCL) -#define LL_SYSCFG_I2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C_SCL pin */ -#define LL_SYSCFG_I2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C_SDA pin*/ -#endif /* SYSCFG_CFGR_FMPI2C1_SCL */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT - * @{ - */ -#define LL_SYSCFG_EXTI_PORTA (uint32_t)0 /*!< EXTI PORT A */ -#define LL_SYSCFG_EXTI_PORTB (uint32_t)1 /*!< EXTI PORT B */ -#define LL_SYSCFG_EXTI_PORTC (uint32_t)2 /*!< EXTI PORT C */ -#define LL_SYSCFG_EXTI_PORTD (uint32_t)3 /*!< EXTI PORT D */ -#define LL_SYSCFG_EXTI_PORTE (uint32_t)4 /*!< EXTI PORT E */ -#if defined(GPIOF) -#define LL_SYSCFG_EXTI_PORTF (uint32_t)5 /*!< EXTI PORT F */ -#endif /* GPIOF */ -#if defined(GPIOG) -#define LL_SYSCFG_EXTI_PORTG (uint32_t)6 /*!< EXTI PORT G */ -#endif /* GPIOG */ -#define LL_SYSCFG_EXTI_PORTH (uint32_t)7 /*!< EXTI PORT H */ -#if defined(GPIOI) -#define LL_SYSCFG_EXTI_PORTI (uint32_t)8 /*!< EXTI PORT I */ -#endif /* GPIOI */ -#if defined(GPIOJ) -#define LL_SYSCFG_EXTI_PORTJ (uint32_t)9 /*!< EXTI PORT J */ -#endif /* GPIOJ */ -#if defined(GPIOK) -#define LL_SYSCFG_EXTI_PORTK (uint32_t)10 /*!< EXTI PORT k */ -#endif /* GPIOK */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE - * @{ - */ -#define LL_SYSCFG_EXTI_LINE0 (uint32_t)(0x000FU << 16 | 0) /*!< EXTI_POSITION_0 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE1 (uint32_t)(0x00F0U << 16 | 0) /*!< EXTI_POSITION_4 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE2 (uint32_t)(0x0F00U << 16 | 0) /*!< EXTI_POSITION_8 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE3 (uint32_t)(0xF000U << 16 | 0) /*!< EXTI_POSITION_12 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE4 (uint32_t)(0x000FU << 16 | 1) /*!< EXTI_POSITION_0 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE5 (uint32_t)(0x00F0U << 16 | 1) /*!< EXTI_POSITION_4 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE6 (uint32_t)(0x0F00U << 16 | 1) /*!< EXTI_POSITION_8 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE7 (uint32_t)(0xF000U << 16 | 1) /*!< EXTI_POSITION_12 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE8 (uint32_t)(0x000FU << 16 | 2) /*!< EXTI_POSITION_0 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE9 (uint32_t)(0x00F0U << 16 | 2) /*!< EXTI_POSITION_4 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE10 (uint32_t)(0x0F00U << 16 | 2) /*!< EXTI_POSITION_8 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE11 (uint32_t)(0xF000U << 16 | 2) /*!< EXTI_POSITION_12 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE12 (uint32_t)(0x000FU << 16 | 3) /*!< EXTI_POSITION_0 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE13 (uint32_t)(0x00F0U << 16 | 3) /*!< EXTI_POSITION_4 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE14 (uint32_t)(0x0F00U << 16 | 3) /*!< EXTI_POSITION_8 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE15 (uint32_t)(0xF000U << 16 | 3) /*!< EXTI_POSITION_12 | EXTICR[3] */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK - * @{ - */ -#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) -#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_LOCKUP_LOCK /*!< Enables and locks the LOCKUP output of CortexM4 - with Break Input of TIM1/8 */ -#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVD_LOCK /*!< Enables and locks the PVD connection with TIM1/8 Break Input - and also the PVDE and PLS bits of the Power Control Interface */ -#endif /* SYSCFG_CFGR2_CLL */ -/** - * @} - */ - -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** @defgroup SYSTEM_LL_DFSDM_BitStream_ClockSource SYSCFG MCHDLY BCKKSEL - * @{ - */ -#define LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 (uint32_t)0x00000000 -#define LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 SYSCFG_MCHDLYCR_BSCKSEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_MCHDLYEN SYSCFG MCHDLY MCHDLYEN - * @{ - */ -#define LL_SYSCFG_DFSDM1_MCHDLYEN SYSCFG_MCHDLYCR_MCHDLY1EN -#define LL_SYSCFG_DFSDM2_MCHDLYEN SYSCFG_MCHDLYCR_MCHDLY2EN -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_DataIn0_Source SYSCFG MCHDLY DFSDMD0SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_DataIn0 SYSCFG_MCHDLYCR_DFSDM1D0SEL -#define LL_SYSCFG_DFSDM2_DataIn0 SYSCFG_MCHDLYCR_DFSDM2D0SEL - -#define LL_SYSCFG_DFSDM1_DataIn0_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM1_DataIn0_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D0SEL) -#define LL_SYSCFG_DFSDM2_DataIn0_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM2_DataIn0_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D0SEL) -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_DataIn2_Source SYSCFG MCHDLY DFSDMD2SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_DataIn2 SYSCFG_MCHDLYCR_DFSDM1D2SEL -#define LL_SYSCFG_DFSDM2_DataIn2 SYSCFG_MCHDLYCR_DFSDM2D2SEL - -#define LL_SYSCFG_DFSDM1_DataIn2_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM1_DataIn2_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D2SEL) -#define LL_SYSCFG_DFSDM2_DataIn2_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM2_DataIn2_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D2SEL) -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC2_BitstreamDistribution SYSCFG MCHDLY DFSDM1CK02SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 SYSCFG_MCHDLYCR_DFSDM1CK02SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC1_BitstreamDistribution SYSCFG MCHDLY DFSDM1CK13SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 SYSCFG_MCHDLYCR_DFSDM1CK13SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_CLKIN_SourceSelection SYSCFG MCHDLY DFSDMCFG - * @{ - */ -#define LL_SYSCFG_DFSDM1_CKIN_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_CKIN_DM SYSCFG_MCHDLYCR_DFSDM1CFG -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM1CKOSEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_CKOUT (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM1CKOSEL -/** - * @} - */ - -/** @defgroup SYSTEM_LL_DFSDM2_DataIn4_SourceSelection SYSCFG MCHDLY DFSDM2D4SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_DataIn4_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_DataIn4_DM SYSCFG_MCHDLYCR_DFSDM2D4SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_DataIn6_SourceSelection SYSCFG MCHDLY DFSDM2D6SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_DataIn6_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_DataIn6_DM SYSCFG_MCHDLYCR_DFSDM2D6SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC4_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK04SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 SYSCFG_MCHDLYCR_DFSDM2CK04SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC3_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK15SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 SYSCFG_MCHDLYCR_DFSDM2CK15SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC2_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK26SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 SYSCFG_MCHDLYCR_DFSDM2CK26SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC1_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK37SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 SYSCFG_MCHDLYCR_DFSDM2CK37SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_CLKIN_SourceSelection SYSCFG MCHDLY DFSDM2CFG - * @{ - */ -#define LL_SYSCFG_DFSDM2_CKIN_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_CKIN_DM SYSCFG_MCHDLYCR_DFSDM2CFG -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM2CKOSEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_CKOUT (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM2CKOSEL -/** - * @} - */ -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ - -/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment - * @{ - */ -#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ -#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP - * @{ - */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1_FZ_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */ -#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1_FZ_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1_FZ_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1_FZ_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_LPTIM_STOP) -#define LL_DBGMCU_APB1_GRP1_LPTIM_STOP DBGMCU_APB1_FZ_DBG_LPTIM_STOP /*!< LPTIM counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_LPTIM_STOP */ -#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC counter stopped when core is halted */ -#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ -#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT) -#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */ -#if defined(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT) -#define LL_DBGMCU_APB1_GRP1_I2C4_STOP DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT /*!< I2C4 SMBUS timeout mode stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN1_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_APB1_FZ_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN1_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN2_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1_FZ_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN2_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN3_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN3_STOP DBGMCU_APB1_FZ_DBG_CAN3_STOP /*!< CAN3 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN3_STOP */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP - * @{ - */ -#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ -#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP) -#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2_FZ_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */ -#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */ -#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2_FZ_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */ -#if defined(DBGMCU_APB2_FZ_DBG_TIM10_STOP) -#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_APB2_FZ_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */ -#endif /* DBGMCU_APB2_FZ_DBG_TIM10_STOP */ -#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_APB2_FZ_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY - * @{ - */ -#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */ -#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */ -#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */ -#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */ -#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */ -#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */ -#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */ -#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */ -#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */ -#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */ -#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */ -#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */ -#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */ -#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */ -#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */ -#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions - * @{ - */ - -/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG - * @{ - */ -/** - * @brief Set memory mapping at address 0x00000000 - * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory - * @param Memory This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_REMAP_FLASH - * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH - * @arg @ref LL_SYSCFG_REMAP_SRAM - * @arg @ref LL_SYSCFG_REMAP_FSMC (*) - * @arg @ref LL_SYSCFG_REMAP_FMC (*) - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) -{ - MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory); -} - -/** - * @brief Get memory mapping at address 0x00000000 - * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_REMAP_FLASH - * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH - * @arg @ref LL_SYSCFG_REMAP_SRAM - * @arg @ref LL_SYSCFG_REMAP_FSMC (*) - * @arg @ref LL_SYSCFG_REMAP_FMC (*) - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE)); -} - -#if defined(SYSCFG_MEMRMP_SWP_FMC) -/** - * @brief Enables the FMC Memory Mapping Swapping - * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_EnableFMCMemorySwapping - * @note SDRAM is accessible at 0x60000000 and NOR/RAM - * is accessible at 0xC0000000 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableFMCMemorySwapping(void) -{ - SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC_0); -} - -/** - * @brief Disables the FMC Memory Mapping Swapping - * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_DisableFMCMemorySwapping - * @note SDRAM is accessible at 0xC0000000 (default mapping) - * and NOR/RAM is accessible at 0x60000000 (default mapping) - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableFMCMemorySwapping(void) -{ - CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC); -} - -#endif /* SYSCFG_MEMRMP_SWP_FMC */ -/** - * @brief Enables the Compensation cell Power Down - * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_EnableCompensationCell - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void) -{ - SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD); -} - -/** - * @brief Disables the Compensation cell Power Down - * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_DisableCompensationCell - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void) -{ - CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD); -} - -/** - * @brief Get Compensation Cell ready Flag - * @rmtoll SYSCFG_CMPCR READY LL_SYSCFG_IsActiveFlag_CMPCR - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void) -{ - return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY)); -} - -#if defined(SYSCFG_PMC_MII_RMII_SEL) -/** - * @brief Select Ethernet PHY interface - * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_SetPHYInterface - * @param Interface This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_PMC_ETHMII - * @arg @ref LL_SYSCFG_PMC_ETHRMII - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface) -{ - MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface); -} - -/** - * @brief Get Ethernet PHY interface - * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_GetPHYInterface - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_PMC_ETHMII - * @arg @ref LL_SYSCFG_PMC_ETHRMII - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL)); -} -#endif /* SYSCFG_PMC_MII_RMII_SEL */ - - - -#if defined(SYSCFG_MEMRMP_UFB_MODE) -/** - * @brief Select Flash bank mode (Bank flashed at 0x08000000) - * @rmtoll SYSCFG_MEMRMP UFB_MODE LL_SYSCFG_SetFlashBankMode - * @param Bank This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_BANKMODE_BANK1 - * @arg @ref LL_SYSCFG_BANKMODE_BANK2 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank) -{ - MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE, Bank); -} - -/** - * @brief Get Flash bank mode (Bank flashed at 0x08000000) - * @rmtoll SYSCFG_MEMRMP UFB_MODE LL_SYSCFG_GetFlashBankMode - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_BANKMODE_BANK1 - * @arg @ref LL_SYSCFG_BANKMODE_BANK2 - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE)); -} -#endif /* SYSCFG_MEMRMP_UFB_MODE */ - -#if defined(SYSCFG_CFGR_FMPI2C1_SCL) -/** - * @brief Enable the I2C fast mode plus driving capability. - * @rmtoll SYSCFG_CFGR FMPI2C1_SCL LL_SYSCFG_EnableFastModePlus\n - * SYSCFG_CFGR FMPI2C1_SDA LL_SYSCFG_EnableFastModePlus - * @param ConfigFastModePlus This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - SET_BIT(SYSCFG->CFGR, ConfigFastModePlus); -} - -/** - * @brief Disable the I2C fast mode plus driving capability. - * @rmtoll SYSCFG_CFGR FMPI2C1_SCL LL_SYSCFG_DisableFastModePlus\n - * SYSCFG_CFGR FMPI2C1_SDA LL_SYSCFG_DisableFastModePlus\n - * @param ConfigFastModePlus This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - CLEAR_BIT(SYSCFG->CFGR, ConfigFastModePlus); -} -#endif /* SYSCFG_CFGR_FMPI2C1_SCL */ - -/** - * @brief Configure source input for the EXTI external interrupt. - * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource - * @param Port This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_PORTA - * @arg @ref LL_SYSCFG_EXTI_PORTB - * @arg @ref LL_SYSCFG_EXTI_PORTC - * @arg @ref LL_SYSCFG_EXTI_PORTD - * @arg @ref LL_SYSCFG_EXTI_PORTE - * @arg @ref LL_SYSCFG_EXTI_PORTF (*) - * @arg @ref LL_SYSCFG_EXTI_PORTG (*) - * @arg @ref LL_SYSCFG_EXTI_PORTH - * - * (*) value not defined in all devices - * @param Line This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_LINE0 - * @arg @ref LL_SYSCFG_EXTI_LINE1 - * @arg @ref LL_SYSCFG_EXTI_LINE2 - * @arg @ref LL_SYSCFG_EXTI_LINE3 - * @arg @ref LL_SYSCFG_EXTI_LINE4 - * @arg @ref LL_SYSCFG_EXTI_LINE5 - * @arg @ref LL_SYSCFG_EXTI_LINE6 - * @arg @ref LL_SYSCFG_EXTI_LINE7 - * @arg @ref LL_SYSCFG_EXTI_LINE8 - * @arg @ref LL_SYSCFG_EXTI_LINE9 - * @arg @ref LL_SYSCFG_EXTI_LINE10 - * @arg @ref LL_SYSCFG_EXTI_LINE11 - * @arg @ref LL_SYSCFG_EXTI_LINE12 - * @arg @ref LL_SYSCFG_EXTI_LINE13 - * @arg @ref LL_SYSCFG_EXTI_LINE14 - * @arg @ref LL_SYSCFG_EXTI_LINE15 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) -{ - MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16))); -} - -/** - * @brief Get the configured defined for specific EXTI Line - * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource - * @param Line This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_LINE0 - * @arg @ref LL_SYSCFG_EXTI_LINE1 - * @arg @ref LL_SYSCFG_EXTI_LINE2 - * @arg @ref LL_SYSCFG_EXTI_LINE3 - * @arg @ref LL_SYSCFG_EXTI_LINE4 - * @arg @ref LL_SYSCFG_EXTI_LINE5 - * @arg @ref LL_SYSCFG_EXTI_LINE6 - * @arg @ref LL_SYSCFG_EXTI_LINE7 - * @arg @ref LL_SYSCFG_EXTI_LINE8 - * @arg @ref LL_SYSCFG_EXTI_LINE9 - * @arg @ref LL_SYSCFG_EXTI_LINE10 - * @arg @ref LL_SYSCFG_EXTI_LINE11 - * @arg @ref LL_SYSCFG_EXTI_LINE12 - * @arg @ref LL_SYSCFG_EXTI_LINE13 - * @arg @ref LL_SYSCFG_EXTI_LINE14 - * @arg @ref LL_SYSCFG_EXTI_LINE15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_PORTA - * @arg @ref LL_SYSCFG_EXTI_PORTB - * @arg @ref LL_SYSCFG_EXTI_PORTC - * @arg @ref LL_SYSCFG_EXTI_PORTD - * @arg @ref LL_SYSCFG_EXTI_PORTE - * @arg @ref LL_SYSCFG_EXTI_PORTF (*) - * @arg @ref LL_SYSCFG_EXTI_PORTG (*) - * @arg @ref LL_SYSCFG_EXTI_PORTH - * (*) value not defined in all devices - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) -{ - return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16)); -} - -#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) -/** - * @brief Set connections to TIM1/8 break inputs - * @rmtoll SYSCFG_CFGR2 LockUp Lock LL_SYSCFG_SetTIMBreakInputs \n - * SYSCFG_CFGR2 PVD Lock LL_SYSCFG_SetTIMBreakInputs - * @param Break This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP - * @arg @ref LL_SYSCFG_TIMBREAK_PVD - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) -{ - MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK, Break); -} - -/** - * @brief Get connections to TIM1/8 Break inputs - * @rmtoll SYSCFG_CFGR2 LockUp Lock LL_SYSCFG_SetTIMBreakInputs \n - * SYSCFG_CFGR2 PVD Lock LL_SYSCFG_SetTIMBreakInputs - * @retval Returned value can be can be a combination of the following values: - * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP - * @arg @ref LL_SYSCFG_TIMBREAK_PVD - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK)); -} -#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */ -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** - * @brief Select the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock. - * @rmtoll SYSCFG_MCHDLYCR BSCKSEL LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL, ClockSource); -} -/** - * @brief Get the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock. - * @rmtoll SYSCFG_MCHDLYCR BSCKSEL LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL)); -} -/** - * @brief Enables the DFSDM1 or DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLYEN LL_SYSCFG_DFSDM_EnableDelayClock - * @param MCHDLY This parameter can be one of the following values - * @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN - * @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_EnableDelayClock(uint32_t MCHDLY) -{ - SET_BIT(SYSCFG->MCHDLYCR, MCHDLY); -} - -/** - * @brief Disables the DFSDM1 or the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY1EN LL_SYSCFG_DFSDM1_DisableDelayClock - * @param MCHDLY This parameter can be one of the following values - * @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN - * @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_DisableDelayClock(uint32_t MCHDLY) -{ - CLEAR_BIT(SYSCFG->MCHDLYCR, MCHDLY); -} - -/** - * @brief Select the source for DFSDM1 or DFSDM2 DatIn0 - * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL LL_SYSCFG_DFSDM_SetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn0Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF)); -} -/** - * @brief Get the source for DFSDM1 or DFSDM2 DatIn0. - * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL LL_SYSCFG_DFSDM_GetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0 - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn0Source(uint32_t Source) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source)); -} -/** - * @brief Select the source for DFSDM1 or DFSDM2 DatIn2 - * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL LL_SYSCFG_DFSDM_SetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn2Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF)); -} -/** - * @brief Get the source for DFSDM1 or DFSDM2 DatIn2. - * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL LL_SYSCFG_DFSDM_GetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2 - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn2Source(uint32_t Source) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM4 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK02SEL LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM4 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM4 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK13SEL LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM4 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL)); -} - -/** - * @brief Select the DFSDM1 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG LL_SYSCFG_DFSDM1_SetClockInSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockInSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG, ClockSource); -} -/** - * @brief GET the DFSDM1 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG LL_SYSCFG_DFSDM1_GetClockInSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockInSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG)); -} - -/** - * @brief Select the DFSDM1 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL LL_SYSCFG_DFSDM1_SetClockOutSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockOutSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL, ClockSource); -} -/** - * @brief GET the DFSDM1 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL LL_SYSCFG_DFSDM1_GetClockOutSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockOutSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL)); -} - -/** - * @brief Enables the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN LL_SYSCFG_DFSDM2_EnableDelayClock - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_EnableDelayClock(void) -{ - SET_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN); -} - -/** - * @brief Disables the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN LL_SYSCFG_DFSDM2_DisableDelayClock - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_DisableDelayClock(void) -{ - CLEAR_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN); -} -/** - * @brief Select the source for DFSDM2 DatIn0 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL LL_SYSCFG_DFSDM2_SetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn0Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn0. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL LL_SYSCFG_DFSDM2_GetDataIn0Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn0Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL LL_SYSCFG_DFSDM2_SetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn2Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn2. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL LL_SYSCFG_DFSDM2_GetDataIn2Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn2Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL LL_SYSCFG_DFSDM2_SetDataIn4Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn4Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn4. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL LL_SYSCFG_DFSDM2_GetDataIn4Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn4Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn6 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL LL_SYSCFG_DFSDM2_SetDataIn6Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn6Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn6. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL LL_SYSCFG_DFSDM2_GetDataIn6Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn6Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC3 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK15SEL LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK26SEL LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL)); -} - -/** - * @brief Select the DFSDM2 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG LL_SYSCFG_DFSDM2_SetClockInSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockInSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG, ClockSource); -} -/** - * @brief GET the DFSDM2 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG LL_SYSCFG_DFSDM2_GetClockInSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockInSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG)); -} - -/** - * @brief Select the DFSDM2 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL LL_SYSCFG_DFSDM2_SetClockOutSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockOutSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL, ClockSource); -} -/** - * @brief GET the DFSDM2 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL LL_SYSCFG_DFSDM2_GetClockOutSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockOutSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL)); -} - -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ -/** - * @} - */ - - -/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU - * @{ - */ - -/** - * @brief Return the device identifier - * @note For STM32F405/407xx and STM32F415/417xx devices, the device ID is 0x413 - * @note For STM32F42xxx and STM32F43xxx devices, the device ID is 0x419 - * @note For STM32F401xx devices, the device ID is 0x423 - * @note For STM32F401xx devices, the device ID is 0x433 - * @note For STM32F411xx devices, the device ID is 0x431 - * @note For STM32F410xx devices, the device ID is 0x458 - * @note For STM32F412xx devices, the device ID is 0x441 - * @note For STM32F413xx and STM32423xx devices, the device ID is 0x463 - * @note For STM32F446xx devices, the device ID is 0x421 - * @note For STM32F469xx and STM32F479xx devices, the device ID is 0x434 - * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID - * @retval Values between Min_Data=0x00 and Max_Data=0xFFF - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); -} - -/** - * @brief Return the device revision identifier - * @note This field indicates the revision of the device. - For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001, rev1 -> 0x1003, rev2 ->0x1007, revY -> 0x100F for STM32F405/407xx and STM32F415/417xx devices - For example, it is read as RevA -> 0x1000, Cat 2 revY -> 0x1003, rev1 -> 0x1007, rev3 ->0x2001 for STM32F42xxx and STM32F43xxx devices - For example, it is read as RevZ -> 0x1000, Cat 2 revA -> 0x1001 for STM32F401xB/C devices - For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001 for STM32F401xD/E devices - For example, it is read as RevA -> 0x1000 for STM32F411xx,STM32F413/423xx,STM32F469/423xx, STM32F446xx and STM32F410xx devices - For example, it is read as RevZ -> 0x1001, Cat 2 revB -> 0x2000, revC -> 0x3000 for STM32F412xx devices - * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID - * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); -} - -/** - * @brief Enable the Debug Module during SLEEP mode - * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Disable the Debug Module during SLEEP mode - * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Enable the Debug Module during STOP mode - * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Disable the Debug Module during STOP mode - * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Enable the Debug Module during STANDBY mode - * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Disable the Debug Module during STANDBY mode - * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Set Trace pin assignment control - * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n - * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment - * @param PinAssignment This parameter can be one of the following values: - * @arg @ref LL_DBGMCU_TRACE_NONE - * @arg @ref LL_DBGMCU_TRACE_ASYNCH - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment) -{ - MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment); -} - -/** - * @brief Get Trace pin assignment control - * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n - * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment - * @retval Returned value can be one of the following values: - * @arg @ref LL_DBGMCU_TRACE_NONE - * @arg @ref LL_DBGMCU_TRACE_ASYNCH - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)); -} - -/** - * @brief Freeze APB1 peripherals (group1 peripherals) - * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_LPTIM_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) -{ - SET_BIT(DBGMCU->APB1FZ, Periphs); -} - -/** - * @brief Unfreeze APB1 peripherals (group1 peripherals) - * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_LPTIM_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) -{ - CLEAR_BIT(DBGMCU->APB1FZ, Periphs); -} - -/** - * @brief Freeze APB2 peripherals - * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) -{ - SET_BIT(DBGMCU->APB2FZ, Periphs); -} - -/** - * @brief Unfreeze APB2 peripherals - * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) -{ - CLEAR_BIT(DBGMCU->APB2FZ, Periphs); -} -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EF_FLASH FLASH - * @{ - */ - -/** - * @brief Set FLASH Latency - * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency - * @param Latency This parameter can be one of the following values: - * @arg @ref LL_FLASH_LATENCY_0 - * @arg @ref LL_FLASH_LATENCY_1 - * @arg @ref LL_FLASH_LATENCY_2 - * @arg @ref LL_FLASH_LATENCY_3 - * @arg @ref LL_FLASH_LATENCY_4 - * @arg @ref LL_FLASH_LATENCY_5 - * @arg @ref LL_FLASH_LATENCY_6 - * @arg @ref LL_FLASH_LATENCY_7 - * @arg @ref LL_FLASH_LATENCY_8 - * @arg @ref LL_FLASH_LATENCY_9 - * @arg @ref LL_FLASH_LATENCY_10 - * @arg @ref LL_FLASH_LATENCY_11 - * @arg @ref LL_FLASH_LATENCY_12 - * @arg @ref LL_FLASH_LATENCY_13 - * @arg @ref LL_FLASH_LATENCY_14 - * @arg @ref LL_FLASH_LATENCY_15 - * @retval None - */ -__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) -{ - MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); -} - -/** - * @brief Get FLASH Latency - * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency - * @retval Returned value can be one of the following values: - * @arg @ref LL_FLASH_LATENCY_0 - * @arg @ref LL_FLASH_LATENCY_1 - * @arg @ref LL_FLASH_LATENCY_2 - * @arg @ref LL_FLASH_LATENCY_3 - * @arg @ref LL_FLASH_LATENCY_4 - * @arg @ref LL_FLASH_LATENCY_5 - * @arg @ref LL_FLASH_LATENCY_6 - * @arg @ref LL_FLASH_LATENCY_7 - * @arg @ref LL_FLASH_LATENCY_8 - * @arg @ref LL_FLASH_LATENCY_9 - * @arg @ref LL_FLASH_LATENCY_10 - * @arg @ref LL_FLASH_LATENCY_11 - * @arg @ref LL_FLASH_LATENCY_12 - * @arg @ref LL_FLASH_LATENCY_13 - * @arg @ref LL_FLASH_LATENCY_14 - * @arg @ref LL_FLASH_LATENCY_15 - */ -__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) -{ - return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); -} - -/** - * @brief Enable Prefetch - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); -} - -/** - * @brief Disable Prefetch - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); -} - -/** - * @brief Check if Prefetch buffer is enabled - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) -{ - return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)); -} - -/** - * @brief Enable Instruction cache - * @rmtoll FLASH_ACR ICEN LL_FLASH_EnableInstCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableInstCache(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_ICEN); -} - -/** - * @brief Disable Instruction cache - * @rmtoll FLASH_ACR ICEN LL_FLASH_DisableInstCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableInstCache(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN); -} - -/** - * @brief Enable Data cache - * @rmtoll FLASH_ACR DCEN LL_FLASH_EnableDataCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableDataCache(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_DCEN); -} - -/** - * @brief Disable Data cache - * @rmtoll FLASH_ACR DCEN LL_FLASH_DisableDataCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableDataCache(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN); -} - -/** - * @brief Enable Instruction cache reset - * @note bit can be written only when the instruction cache is disabled - * @rmtoll FLASH_ACR ICRST LL_FLASH_EnableInstCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); -} - -/** - * @brief Disable Instruction cache reset - * @rmtoll FLASH_ACR ICRST LL_FLASH_DisableInstCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); -} - -/** - * @brief Enable Data cache reset - * @note bit can be written only when the data cache is disabled - * @rmtoll FLASH_ACR DCRST LL_FLASH_EnableDataCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); -} - -/** - * @brief Disable Data cache reset - * @rmtoll FLASH_ACR DCRST LL_FLASH_DisableDataCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); -} - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_SYSTEM_H */ - - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h deleted file mode 100644 index a7114cd..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h +++ /dev/null @@ -1,536 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_usb.h - * @author MCD Application Team - * @brief Header file of USB Low Layer HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_USB_H -#define STM32F4xx_LL_USB_H - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup USB_LL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief USB Mode definition - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) - -typedef enum -{ - USB_DEVICE_MODE = 0, - USB_HOST_MODE = 1, - USB_DRD_MODE = 2 -} USB_OTG_ModeTypeDef; - -/** - * @brief URB States definition - */ -typedef enum -{ - URB_IDLE = 0, - URB_DONE, - URB_NOTREADY, - URB_NYET, - URB_ERROR, - URB_STALL -} USB_OTG_URBStateTypeDef; - -/** - * @brief Host channel States definition - */ -typedef enum -{ - HC_IDLE = 0, - HC_XFRC, - HC_HALTED, - HC_NAK, - HC_NYET, - HC_STALL, - HC_XACTERR, - HC_BBLERR, - HC_DATATGLERR -} USB_OTG_HCStateTypeDef; - - -/** - * @brief USB Instance Initialization Structure definition - */ -typedef struct -{ - uint32_t dev_endpoints; /*!< Device Endpoints number. - This parameter depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t Host_channels; /*!< Host Channels number. - This parameter Depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t speed; /*!< USB Core speed. - This parameter can be any value of @ref PCD_Speed/HCD_Speed - (HCD_SPEED_xxx, HCD_SPEED_xxx) */ - - uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ - - uint32_t phy_itface; /*!< Select the used PHY interface. - This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ - - uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - - uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ - - uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ - - uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ - - uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ - - uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ - - uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ - -} USB_OTG_CfgTypeDef; - -typedef struct -{ - uint8_t num; /*!< Endpoint number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_stall; /*!< Endpoint stall condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_iso_incomplete; /*!< Endpoint isoc condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t type; /*!< Endpoint type - This parameter can be any value of @ref USB_LL_EP_Type */ - - uint8_t data_pid_start; /*!< Initial data PID - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t even_odd_frame; /*!< IFrame parity - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint16_t tx_fifo_num; /*!< Transmission FIFO number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t maxpacket; /*!< Endpoint Max packet size - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ - - uint32_t xfer_len; /*!< Current transfer length */ - - uint32_t xfer_size; /*!< requested transfer size */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ -} USB_OTG_EPTypeDef; - -typedef struct -{ - uint8_t dev_addr; /*!< USB device address. - This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ - - uint8_t ch_num; /*!< Host channel number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_num; /*!< Endpoint number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t speed; /*!< USB Host Channel speed. - This parameter can be any value of @ref HCD_Device_Speed: - (HCD_DEVICE_SPEED_xxx) */ - - uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ - - uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ - - uint8_t ep_type; /*!< Endpoint Type. - This parameter can be any value of @ref USB_LL_EP_Type */ - - uint16_t max_packet; /*!< Endpoint Max packet size. - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t data_pid; /*!< Initial data PID. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ - - uint32_t XferSize; /*!< OTG Channel transfer size. */ - - uint32_t xfer_len; /*!< Current transfer length. */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ - - uint8_t toggle_in; /*!< IN transfer current toggle flag. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t toggle_out; /*!< OUT transfer current toggle flag - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ - - uint32_t ErrCnt; /*!< Host channel error count. */ - - USB_OTG_URBStateTypeDef urb_state; /*!< URB state. - This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ - - USB_OTG_HCStateTypeDef state; /*!< Host Channel state. - This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ -} USB_OTG_HCTypeDef; -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @defgroup USB_OTG_CORE VERSION ID - * @{ - */ -#define USB_OTG_CORE_ID_300A 0x4F54300AU -#define USB_OTG_CORE_ID_310A 0x4F54310AU -/** - * @} - */ - -/** @defgroup USB_Core_Mode_ USB Core Mode - * @{ - */ -#define USB_OTG_MODE_DEVICE 0U -#define USB_OTG_MODE_HOST 1U -#define USB_OTG_MODE_DRD 2U -/** - * @} - */ - -/** @defgroup USB_LL Device Speed - * @{ - */ -#define USBD_HS_SPEED 0U -#define USBD_HSINFS_SPEED 1U -#define USBH_HS_SPEED 0U -#define USBD_FS_SPEED 2U -#define USBH_FSLS_SPEED 1U -/** - * @} - */ - -/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed - * @{ - */ -#define USB_OTG_SPEED_HIGH 0U -#define USB_OTG_SPEED_HIGH_IN_FULL 1U -#define USB_OTG_SPEED_FULL 3U -/** - * @} - */ - -/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY - * @{ - */ -#define USB_OTG_ULPI_PHY 1U -#define USB_OTG_EMBEDDED_PHY 2U -/** - * @} - */ - -/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value - * @{ - */ -#ifndef USBD_HS_TRDT_VALUE -#define USBD_HS_TRDT_VALUE 9U -#endif /* USBD_HS_TRDT_VALUE */ -#ifndef USBD_FS_TRDT_VALUE -#define USBD_FS_TRDT_VALUE 5U -#define USBD_DEFAULT_TRDT_VALUE 9U -#endif /* USBD_HS_TRDT_VALUE */ -/** - * @} - */ - -/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS - * @{ - */ -#define USB_OTG_HS_MAX_PACKET_SIZE 512U -#define USB_OTG_FS_MAX_PACKET_SIZE 64U -#define USB_OTG_MAX_EP0_SIZE 64U -/** - * @} - */ - -/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency - * @{ - */ -#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) -#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) -#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) -/** - * @} - */ - -/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval - * @{ - */ -#define DCFG_FRAME_INTERVAL_80 0U -#define DCFG_FRAME_INTERVAL_85 1U -#define DCFG_FRAME_INTERVAL_90 2U -#define DCFG_FRAME_INTERVAL_95 3U -/** - * @} - */ - -/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS - * @{ - */ -#define EP_MPS_64 0U -#define EP_MPS_32 1U -#define EP_MPS_16 2U -#define EP_MPS_8 3U -/** - * @} - */ - -/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed - * @{ - */ -#define EP_SPEED_LOW 0U -#define EP_SPEED_FULL 1U -#define EP_SPEED_HIGH 2U -/** - * @} - */ - -/** @defgroup USB_LL_EP_Type USB Low Layer EP Type - * @{ - */ -#define EP_TYPE_CTRL 0U -#define EP_TYPE_ISOC 1U -#define EP_TYPE_BULK 2U -#define EP_TYPE_INTR 3U -#define EP_TYPE_MSK 3U -/** - * @} - */ - -/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines - * @{ - */ -#define STS_GOUT_NAK 1U -#define STS_DATA_UPDT 2U -#define STS_XFER_COMP 3U -#define STS_SETUP_COMP 4U -#define STS_SETUP_UPDT 6U -/** - * @} - */ - -/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines - * @{ - */ -#define HCFG_30_60_MHZ 0U -#define HCFG_48_MHZ 1U -#define HCFG_6_MHZ 2U -/** - * @} - */ - -/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines - * @{ - */ -#define HPRT0_PRTSPD_HIGH_SPEED 0U -#define HPRT0_PRTSPD_FULL_SPEED 1U -#define HPRT0_PRTSPD_LOW_SPEED 2U -/** - * @} - */ - -#define HCCHAR_CTRL 0U -#define HCCHAR_ISOC 1U -#define HCCHAR_BULK 2U -#define HCCHAR_INTR 3U - -#define HC_PID_DATA0 0U -#define HC_PID_DATA2 1U -#define HC_PID_DATA1 2U -#define HC_PID_SETUP 3U - -#define GRXSTS_PKTSTS_IN 2U -#define GRXSTS_PKTSTS_IN_XFER_COMP 3U -#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U -#define GRXSTS_PKTSTS_CH_HALTED 7U - -#define TEST_J 1U -#define TEST_K 2U -#define TEST_SE0_NAK 3U -#define TEST_PACKET 4U -#define TEST_FORCE_EN 5U - -#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) -#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) - -#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) -#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ - + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) - -#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ - + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) - -#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) - -#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) -#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ - + USB_OTG_HOST_CHANNEL_BASE\ - + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) - -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#define EP_ADDR_MSK 0xFU - -#ifndef USE_USB_DOUBLE_BUFFER -#define USE_USB_DOUBLE_BUFFER 1U -#endif /* USE_USB_DOUBLE_BUFFER */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) -#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) - -#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) -#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode); -HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); -HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); -HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, - uint8_t ch_ep_num, uint16_t len, uint8_t dma); - -void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); -HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); -HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup); -uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); -uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); -void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); - -HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq); -HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state); -uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, - uint8_t epnum, uint8_t dev_address, uint8_t speed, - uint8_t ep_type, uint16_t mps); -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, - USB_OTG_HCTypeDef *hc, uint8_t dma); - -uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); -HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); -HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - - -#endif /* STM32F4xx_LL_USB_H */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h deleted file mode 100644 index 2b254a1..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h +++ /dev/null @@ -1,307 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_utils.h - * @author MCD Application Team - * @brief Header file of UTILS LL module. - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LL UTILS driver contains a set of generic APIs that can be - used by user: - (+) Device electronic signature - (+) Timing functions - (+) PLL configuration functions - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_UTILS_H -#define __STM32F4xx_LL_UTILS_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -/** @defgroup UTILS_LL UTILS - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants - * @{ - */ - -/* Max delay can be used in LL_mDelay */ -#define LL_MAX_DELAY 0xFFFFFFFFU - -/** - * @brief Unique device ID register base address - */ -#define UID_BASE_ADDRESS UID_BASE - -/** - * @brief Flash size data register base address - */ -#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE - -/** - * @brief Package data register base address - */ -#define PACKAGE_BASE_ADDRESS PACKAGE_BASE - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros - * @{ - */ -/** - * @} - */ -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures - * @{ - */ -/** - * @brief UTILS PLL structure definition - */ -typedef struct -{ - uint32_t PLLM; /*!< Division factor for PLL VCO input clock. - This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ - - uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = @ref RCC_PLLN_MIN_VALUE - and Max_Data = @ref RCC_PLLN_MIN_VALUE - - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ - - uint32_t PLLP; /*!< Division for the main system clock. - This parameter can be a value of @ref RCC_LL_EC_PLLP_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ -} LL_UTILS_PLLInitTypeDef; - -/** - * @brief UTILS System, AHB and APB buses clock configuration structure definition - */ -typedef struct -{ - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_SetAHBPrescaler(). */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_LL_EC_APB1_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_SetAPB1Prescaler(). */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_LL_EC_APB2_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_SetAPB2Prescaler(). */ - -} LL_UTILS_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants - * @{ - */ - -/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation - * @{ - */ -#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ -#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ -/** - * @} - */ - -/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE - * @{ - */ -#define LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 0x00000000U /*!< WLCSP36 or UFQFPN48 or LQFP64 package type */ -#define LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 0x00000100U /*!< WLCSP168 or FBGA169 or LQFP100 or LQFP64 or UFQFPN48 package type */ -#define LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 0x00000200U /*!< WLCSP64 or WLCSP81 or LQFP176 or UFBGA176 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 0x00000300U /*!< LQFP144 or UFBGA144 or UFBGA144 or UFBGA100 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 0x00000400U /*!< LQFP100 or LQFP208 or TFBGA216 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 0x00000500U /*!< LQFP208 or TFBGA216 package type */ -#define LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 0x00000700U /*!< TQFP64 or UFBGA144 or LQFP144 package type */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions - * @{ - */ - -/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE - * @{ - */ - -/** - * @brief Get Word0 of the unique device identifier (UID based on 96 bits) - * @retval UID[31:0] - */ -__STATIC_INLINE uint32_t LL_GetUID_Word0(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); -} - -/** - * @brief Get Word1 of the unique device identifier (UID based on 96 bits) - * @retval UID[63:32] - */ -__STATIC_INLINE uint32_t LL_GetUID_Word1(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); -} - -/** - * @brief Get Word2 of the unique device identifier (UID based on 96 bits) - * @retval UID[95:64] - */ -__STATIC_INLINE uint32_t LL_GetUID_Word2(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); -} - -/** - * @brief Get Flash memory size - * @note This bitfield indicates the size of the device Flash memory expressed in - * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. - * @retval FLASH_SIZE[15:0]: Flash memory size - */ -__STATIC_INLINE uint32_t LL_GetFlashSize(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFF); -} - -/** - * @brief Get Package type - * @retval Returned value can be one of the following values: - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_GetPackageType(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0700U); -} - -/** - * @} - */ - -/** @defgroup UTILS_LL_EF_DELAY DELAY - * @{ - */ - -/** - * @brief This function configures the Cortex-M SysTick source of the time base. - * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) - * @note When a RTOS is used, it is recommended to avoid changing the SysTick - * configuration by calling this function, for a delay use rather osDelay RTOS service. - * @param Ticks Number of ticks - * @retval None - */ -__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) -{ - /* Configure the SysTick to have interrupt in 1ms time base */ - SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ -} - -void LL_Init1msTick(uint32_t HCLKFrequency); -void LL_mDelay(uint32_t Delay); - -/** - * @} - */ - -/** @defgroup UTILS_EF_SYSTEM SYSTEM - * @{ - */ - -void LL_SetSystemCoreClock(uint32_t HCLKFrequency); -ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency); -ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, - LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); -ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, - LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_UTILS_H */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/LICENSE.txt b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/LICENSE.txt deleted file mode 100644 index 3edc4d1..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/LICENSE.txt +++ /dev/null @@ -1,6 +0,0 @@ -This software component is provided to you as part of a software package and -applicable license terms are in the Package_license file. If you received this -software component outside of a package or without applicable license terms, -the terms of the BSD-3-Clause license shall apply. -You may obtain a copy of the BSD-3-Clause at: -https://opensource.org/licenses/BSD-3-Clause diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c deleted file mode 100644 index 9ba2ba7..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c +++ /dev/null @@ -1,615 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal.c - * @author MCD Application Team - * @brief HAL module driver. - * This is the common part of the HAL initialization - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The common HAL driver contains a set of generic and common APIs that can be - used by the PPP peripheral drivers and the user to start using the HAL. - [..] - The HAL contains two APIs' categories: - (+) Common HAL APIs - (+) Services HAL APIs - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup HAL HAL - * @brief HAL module driver. - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup HAL_Private_Constants - * @{ - */ -/** - * @brief STM32F4xx HAL Driver version number V1.8.1 - */ -#define __STM32F4xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ -#define __STM32F4xx_HAL_VERSION_SUB1 (0x08U) /*!< [23:16] sub1 version */ -#define __STM32F4xx_HAL_VERSION_SUB2 (0x01U) /*!< [15:8] sub2 version */ -#define __STM32F4xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ -#define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\ - |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\ - |(__STM32F4xx_HAL_VERSION_SUB2 << 8U )\ - |(__STM32F4xx_HAL_VERSION_RC)) - -#define IDCODE_DEVID_MASK 0x00000FFFU - -/* ------------ RCC registers bit address in the alias region ----------- */ -#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) -/* --- MEMRMP Register ---*/ -/* Alias word address of UFB_MODE bit */ -#define MEMRMP_OFFSET SYSCFG_OFFSET -#define UFB_MODE_BIT_NUMBER SYSCFG_MEMRMP_UFB_MODE_Pos -#define UFB_MODE_BB (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (UFB_MODE_BIT_NUMBER * 4U)) - -/* --- CMPCR Register ---*/ -/* Alias word address of CMP_PD bit */ -#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20U) -#define CMP_PD_BIT_NUMBER SYSCFG_CMPCR_CMP_PD_Pos -#define CMPCR_CMP_PD_BB (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32U) + (CMP_PD_BIT_NUMBER * 4U)) - -/* --- MCHDLYCR Register ---*/ -/* Alias word address of BSCKSEL bit */ -#define MCHDLYCR_OFFSET (SYSCFG_OFFSET + 0x30U) -#define BSCKSEL_BIT_NUMBER SYSCFG_MCHDLYCR_BSCKSEL_Pos -#define MCHDLYCR_BSCKSEL_BB (uint32_t)(PERIPH_BB_BASE + (MCHDLYCR_OFFSET * 32U) + (BSCKSEL_BIT_NUMBER * 4U)) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup HAL_Private_Variables - * @{ - */ -__IO uint32_t uwTick; -uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ -HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Functions HAL Exported Functions - * @{ - */ - -/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initializes the Flash interface the NVIC allocation and initial clock - configuration. It initializes the systick also when timeout is needed - and the backup domain when enabled. - (+) De-Initializes common part of the HAL. - (+) Configure the time base source to have 1ms time base with a dedicated - Tick interrupt priority. - (++) SysTick timer is used by default as source of time base, but user - can eventually implement his proper time base source (a general purpose - timer for example or other time source), keeping in mind that Time base - duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and - handled in milliseconds basis. - (++) Time base configuration function (HAL_InitTick ()) is called automatically - at the beginning of the program after reset by HAL_Init() or at any time - when clock is configured, by HAL_RCC_ClockConfig(). - (++) Source of time base is configured to generate interrupts at regular - time intervals. Care must be taken if HAL_Delay() is called from a - peripheral ISR process, the Tick interrupt line must have higher priority - (numerically lower) than the peripheral interrupt. Otherwise the caller - ISR process will be blocked. - (++) functions affecting time base configurations are declared as __weak - to make override possible in case of other implementations in user file. -@endverbatim - * @{ - */ - -/** - * @brief This function is used to initialize the HAL Library; it must be the first - * instruction to be executed in the main program (before to call any other - * HAL function), it performs the following: - * Configure the Flash prefetch, instruction and Data caches. - * Configures the SysTick to generate an interrupt each 1 millisecond, - * which is clocked by the HSI (at this stage, the clock is not yet - * configured and thus the system is running from the internal HSI at 16 MHz). - * Set NVIC Group Priority to 4. - * Calls the HAL_MspInit() callback function defined in user file - * "stm32f4xx_hal_msp.c" to do the global low level hardware initialization - * - * @note SysTick is used as time base for the HAL_Delay() function, the application - * need to ensure that the SysTick time base is always set to 1 millisecond - * to have correct HAL operation. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_Init(void) -{ - /* Configure Flash prefetch, Instruction cache, Data cache */ -#if (INSTRUCTION_CACHE_ENABLE != 0U) - __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); -#endif /* INSTRUCTION_CACHE_ENABLE */ - -#if (DATA_CACHE_ENABLE != 0U) - __HAL_FLASH_DATA_CACHE_ENABLE(); -#endif /* DATA_CACHE_ENABLE */ - -#if (PREFETCH_ENABLE != 0U) - __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); -#endif /* PREFETCH_ENABLE */ - - /* Set Interrupt Group Priority */ - HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); - - /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ - HAL_InitTick(TICK_INT_PRIORITY); - - /* Init the low level hardware */ - HAL_MspInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief This function de-Initializes common part of the HAL and stops the systick. - * This function is optional. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DeInit(void) -{ - /* Reset of all peripherals */ - __HAL_RCC_APB1_FORCE_RESET(); - __HAL_RCC_APB1_RELEASE_RESET(); - - __HAL_RCC_APB2_FORCE_RESET(); - __HAL_RCC_APB2_RELEASE_RESET(); - - __HAL_RCC_AHB1_FORCE_RESET(); - __HAL_RCC_AHB1_RELEASE_RESET(); - - __HAL_RCC_AHB2_FORCE_RESET(); - __HAL_RCC_AHB2_RELEASE_RESET(); - - __HAL_RCC_AHB3_FORCE_RESET(); - __HAL_RCC_AHB3_RELEASE_RESET(); - - /* De-Init the low level hardware */ - HAL_MspDeInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initialize the MSP. - * @retval None - */ -__weak void HAL_MspInit(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes the MSP. - * @retval None - */ -__weak void HAL_MspDeInit(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief This function configures the source of the time base. - * The time source is configured to have 1ms time base with a dedicated - * Tick interrupt priority. - * @note This function is called automatically at the beginning of program after - * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). - * @note In the default implementation, SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals. - * Care must be taken if HAL_Delay() is called from a peripheral ISR process, - * The SysTick interrupt must have higher priority (numerically lower) - * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. - * The function is declared as __weak to be overwritten in case of other - * implementation in user file. - * @param TickPriority Tick interrupt priority. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) -{ - /* Configure the SysTick to have interrupt in 1ms time basis*/ - if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) - { - return HAL_ERROR; - } - - /* Configure the SysTick IRQ priority */ - if (TickPriority < (1UL << __NVIC_PRIO_BITS)) - { - HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); - uwTickPrio = TickPriority; - } - else - { - return HAL_ERROR; - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions - * @brief HAL Control functions - * -@verbatim - =============================================================================== - ##### HAL Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Provide a tick value in millisecond - (+) Provide a blocking delay in millisecond - (+) Suspend the time base source interrupt - (+) Resume the time base source interrupt - (+) Get the HAL API driver version - (+) Get the device identifier - (+) Get the device revision identifier - (+) Enable/Disable Debug module during SLEEP mode - (+) Enable/Disable Debug module during STOP mode - (+) Enable/Disable Debug module during STANDBY mode - -@endverbatim - * @{ - */ - -/** - * @brief This function is called to increment a global variable "uwTick" - * used as application time base. - * @note In the default implementation, this variable is incremented each 1ms - * in SysTick ISR. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_IncTick(void) -{ - uwTick += uwTickFreq; -} - -/** - * @brief Provides a tick value in millisecond. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval tick value - */ -__weak uint32_t HAL_GetTick(void) -{ - return uwTick; -} - -/** - * @brief This function returns a tick priority. - * @retval tick priority - */ -uint32_t HAL_GetTickPrio(void) -{ - return uwTickPrio; -} - -/** - * @brief Set new tick Freq. - * @retval Status - */ -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) -{ - HAL_StatusTypeDef status = HAL_OK; - HAL_TickFreqTypeDef prevTickFreq; - - assert_param(IS_TICKFREQ(Freq)); - - if (uwTickFreq != Freq) - { - /* Back up uwTickFreq frequency */ - prevTickFreq = uwTickFreq; - - /* Update uwTickFreq global variable used by HAL_InitTick() */ - uwTickFreq = Freq; - - /* Apply the new tick Freq */ - status = HAL_InitTick(uwTickPrio); - - if (status != HAL_OK) - { - /* Restore previous tick frequency */ - uwTickFreq = prevTickFreq; - } - } - - return status; -} - -/** - * @brief Return tick frequency. - * @retval tick period in Hz - */ -HAL_TickFreqTypeDef HAL_GetTickFreq(void) -{ - return uwTickFreq; -} - -/** - * @brief This function provides minimum delay (in milliseconds) based - * on variable incremented. - * @note In the default implementation , SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals where uwTick - * is incremented. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @param Delay specifies the delay time length, in milliseconds. - * @retval None - */ -__weak void HAL_Delay(uint32_t Delay) -{ - uint32_t tickstart = HAL_GetTick(); - uint32_t wait = Delay; - - /* Add a freq to guarantee minimum wait */ - if (wait < HAL_MAX_DELAY) - { - wait += (uint32_t)(uwTickFreq); - } - - while((HAL_GetTick() - tickstart) < wait) - { - } -} - -/** - * @brief Suspend Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() - * is called, the SysTick interrupt will be disabled and so Tick increment - * is suspended. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_SuspendTick(void) -{ - /* Disable SysTick Interrupt */ - SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; -} - -/** - * @brief Resume Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() - * is called, the SysTick interrupt will be enabled and so Tick increment - * is resumed. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_ResumeTick(void) -{ - /* Enable SysTick Interrupt */ - SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; -} - -/** - * @brief Returns the HAL revision - * @retval version : 0xXYZR (8bits for each decimal, R for RC) - */ -uint32_t HAL_GetHalVersion(void) -{ - return __STM32F4xx_HAL_VERSION; -} - -/** - * @brief Returns the device revision identifier. - * @retval Device revision identifier - */ -uint32_t HAL_GetREVID(void) -{ - return((DBGMCU->IDCODE) >> 16U); -} - -/** - * @brief Returns the device identifier. - * @retval Device identifier - */ -uint32_t HAL_GetDEVID(void) -{ - return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); -} - -/** - * @brief Enable the Debug Module during SLEEP mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGSleepMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Disable the Debug Module during SLEEP mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGSleepMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Enable the Debug Module during STOP mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGStopMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Disable the Debug Module during STOP mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGStopMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Enable the Debug Module during STANDBY mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGStandbyMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Disable the Debug Module during STANDBY mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGStandbyMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Enables the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @retval None - */ -void HAL_EnableCompensationCell(void) -{ - *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE; -} - -/** - * @brief Power-down the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @retval None - */ -void HAL_DisableCompensationCell(void) -{ - *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE; -} - -/** - * @brief Returns first word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw0(void) -{ - return (READ_REG(*((uint32_t *)UID_BASE))); -} - -/** - * @brief Returns second word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw1(void) -{ - return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); -} - -/** - * @brief Returns third word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw2(void) -{ - return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); -} - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Enables the Internal FLASH Bank Swapping. - * - * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. - * - * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) - * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000) - * - * @retval None - */ -void HAL_EnableMemorySwappingBank(void) -{ - *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Internal FLASH Bank Swapping. - * - * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. - * - * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000) - * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) - * - * @retval None - */ -void HAL_DisableMemorySwappingBank(void) -{ - *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c deleted file mode 100644 index 98515c5..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c +++ /dev/null @@ -1,502 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cortex.c - * @author MCD Application Team - * @brief CORTEX HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the CORTEX: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - - [..] - *** How to configure Interrupts using CORTEX HAL driver *** - =========================================================== - [..] - This section provides functions allowing to configure the NVIC interrupts (IRQ). - The Cortex-M4 exceptions are managed by CMSIS functions. - - (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() - function according to the following table. - (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). - (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). - (#) please refer to programming manual for details in how to configure priority. - - -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. - The pending IRQ priority will be managed only by the sub priority. - - -@- IRQ priority order (sorted by highest to lowest priority): - (+@) Lowest preemption priority - (+@) Lowest sub priority - (+@) Lowest hardware priority (IRQ number) - - [..] - *** How to configure Systick using CORTEX HAL driver *** - ======================================================== - [..] - Setup SysTick Timer for time base. - - (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which - is a CMSIS function that: - (++) Configures the SysTick Reload register with value passed as function parameter. - (++) Configures the SysTick IRQ priority to the lowest value 0x0F. - (++) Resets the SysTick Counter register. - (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). - (++) Enables the SysTick Interrupt. - (++) Starts the SysTick Counter. - - (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro - __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the - HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined - inside the stm32f4xx_hal_cortex.h file. - - (+) You can change the SysTick IRQ priority by calling the - HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function - call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. - - (+) To adjust the SysTick time base, use the following formula: - - Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) - (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function - (++) Reload Value should not exceed 0xFFFFFF - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup CORTEX CORTEX - * @brief CORTEX HAL module driver - * @{ - */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions - * @{ - */ - - -/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de-initialization functions ##### - ============================================================================== - [..] - This section provides the CORTEX HAL driver functions allowing to configure Interrupts - Systick functionalities - -@endverbatim - * @{ - */ - - -/** - * @brief Sets the priority grouping field (preemption priority and subpriority) - * using the required unlock sequence. - * @param PriorityGroup The priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority - * 1 bits for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority - * 0 bits for subpriority - * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. - * The pending IRQ priority will be managed only by the subpriority. - * @retval None - */ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ - NVIC_SetPriorityGrouping(PriorityGroup); -} - -/** - * @brief Sets the priority of an interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @param PreemptPriority The preemption priority for the IRQn channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority - * @param SubPriority the subpriority level for the IRQ channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority. - * @retval None - */ -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t prioritygroup = 0x00U; - - /* Check the parameters */ - assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); - - prioritygroup = NVIC_GetPriorityGrouping(); - - NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); -} - -/** - * @brief Enables a device specific interrupt in the NVIC interrupt controller. - * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() - * function should be called before. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval None - */ -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Enable interrupt */ - NVIC_EnableIRQ(IRQn); -} - -/** - * @brief Disables a device specific interrupt in the NVIC interrupt controller. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval None - */ -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Disable interrupt */ - NVIC_DisableIRQ(IRQn); -} - -/** - * @brief Initiates a system reset request to reset the MCU. - * @retval None - */ -void HAL_NVIC_SystemReset(void) -{ - /* System Reset */ - NVIC_SystemReset(); -} - -/** - * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. - * Counter is in free running mode to generate periodic interrupts. - * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. - * @retval status: - 0 Function succeeded. - * - 1 Function failed. - */ -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) -{ - return SysTick_Config(TicksNumb); -} -/** - * @} - */ - -/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions - * @brief Cortex control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the CORTEX - (NVIC, SYSTICK, MPU) functionalities. - - -@endverbatim - * @{ - */ - -#if (__MPU_PRESENT == 1U) -/** - * @brief Disables the MPU - * @retval None - */ -void HAL_MPU_Disable(void) -{ - /* Make sure outstanding transfers are done */ - __DMB(); - - /* Disable fault exceptions */ - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; - - /* Disable the MPU and clear the control register*/ - MPU->CTRL = 0U; -} - -/** - * @brief Enable the MPU. - * @param MPU_Control Specifies the control mode of the MPU during hard fault, - * NMI, FAULTMASK and privileged access to the default memory - * This parameter can be one of the following values: - * @arg MPU_HFNMI_PRIVDEF_NONE - * @arg MPU_HARDFAULT_NMI - * @arg MPU_PRIVILEGED_DEFAULT - * @arg MPU_HFNMI_PRIVDEF - * @retval None - */ -void HAL_MPU_Enable(uint32_t MPU_Control) -{ - /* Enable the MPU */ - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; - - /* Enable fault exceptions */ - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; - - /* Ensure MPU setting take effects */ - __DSB(); - __ISB(); -} - -/** - * @brief Initializes and configures the Region and the memory to be protected. - * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains - * the initialization and configuration information. - * @retval None - */ -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) -{ - /* Check the parameters */ - assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); - assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); - - /* Set the Region number */ - MPU->RNR = MPU_Init->Number; - - if ((MPU_Init->Enable) != RESET) - { - /* Check the parameters */ - assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); - assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); - assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); - assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); - assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); - assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); - assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); - assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); - - MPU->RBAR = MPU_Init->BaseAddress; - MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | - ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | - ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | - ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | - ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | - ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | - ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | - ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | - ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); - } - else - { - MPU->RBAR = 0x00U; - MPU->RASR = 0x00U; - } -} -#endif /* __MPU_PRESENT */ - -/** - * @brief Gets the priority grouping field from the NVIC Interrupt Controller. - * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) - */ -uint32_t HAL_NVIC_GetPriorityGrouping(void) -{ - /* Get the PRIGROUP[10:8] field value */ - return NVIC_GetPriorityGrouping(); -} - -/** - * @brief Gets the priority of an interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @param PriorityGroup the priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority - * 1 bits for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority - * 0 bits for subpriority - * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0). - * @param pSubPriority Pointer on the Subpriority value (starting from 0). - * @retval None - */ -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - /* Get priority for Cortex-M system or device specific interrupts */ - NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); -} - -/** - * @brief Sets Pending bit of an external interrupt. - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval None - */ -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Set interrupt pending */ - NVIC_SetPendingIRQ(IRQn); -} - -/** - * @brief Gets Pending Interrupt (reads the pending register in the NVIC - * and returns the pending bit for the specified interrupt). - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Return 1 if pending else 0 */ - return NVIC_GetPendingIRQ(IRQn); -} - -/** - * @brief Clears the pending bit of an external interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval None - */ -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Clear pending interrupt */ - NVIC_ClearPendingIRQ(IRQn); -} - -/** - * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Return 1 if active else 0 */ - return NVIC_GetActive(IRQn); -} - -/** - * @brief Configures the SysTick clock source. - * @param CLKSource specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); - if (CLKSource == SYSTICK_CLKSOURCE_HCLK) - { - SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; - } - else - { - SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; - } -} - -/** - * @brief This function handles SYSTICK interrupt request. - * @retval None - */ -void HAL_SYSTICK_IRQHandler(void) -{ - HAL_SYSTICK_Callback(); -} - -/** - * @brief SYSTICK callback. - * @retval None - */ -__weak void HAL_SYSTICK_Callback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SYSTICK_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_CORTEX_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c deleted file mode 100644 index 3dbb477..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c +++ /dev/null @@ -1,1305 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma.c - * @author MCD Application Team - * @brief DMA HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Direct Memory Access (DMA) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and errors functions - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable and configure the peripheral to be connected to the DMA Stream - (except for internal SRAM/FLASH memories: no initialization is - necessary) please refer to Reference manual for connection between peripherals - and DMA requests. - - (#) For a given Stream, program the required configuration through the following parameters: - Transfer Direction, Source and Destination data formats, - Circular, Normal or peripheral flow control mode, Stream Priority level, - Source and Destination Increment mode, FIFO mode and its Threshold (if needed), - Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function. - - -@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros: - __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE(). - - *** Polling mode IO operation *** - ================================= - [..] - (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source - address and destination address and the Length of data to be transferred. - (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this - case a fixed Timeout can be configured by User depending from his application. - (+) Use HAL_DMA_Abort() function to abort the current transfer. - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() - (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() - (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of - Source address and destination address and the Length of data to be transferred. In this - case the DMA interrupt is configured - (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine - (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can - add his own function by customization of function pointer XferCpltCallback and - XferErrorCallback (i.e a member of DMA handle structure). - [..] - (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error - detection. - - (#) Use HAL_DMA_Abort_IT() function to abort the current transfer - - -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. - - -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is - possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set - Half-Word data size for the peripheral to access its data register and set Word data size - for the Memory to gain in access time. Each two half words will be packed and written in - a single access to a Word in the Memory). - - -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source - and Destination. In this case the Peripheral Data Size will be applied to both Source - and Destination. - - *** DMA HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DMA HAL driver. - - (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream. - (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream. - (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. - - [..] - (@) You can refer to the DMA HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMA DMA - * @brief DMA HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -typedef struct -{ - __IO uint32_t ISR; /*!< DMA interrupt status register */ - __IO uint32_t Reserved0; - __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */ -} DMA_Base_Registers; - -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup DMA_Private_Constants - * @{ - */ - #define HAL_TIMEOUT_DMA_ABORT 5U /* 5 ms */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DMA_Private_Functions - * @{ - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma); - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ -/** @addtogroup DMA_Exported_Functions - * @{ - */ - -/** @addtogroup DMA_Exported_Functions_Group1 - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize the DMA Stream source - and destination addresses, incrementation and data sizes, transfer direction, - circular/normal mode selection, memory-to-memory mode selection and Stream priority value. - [..] - The HAL_DMA_Init() function follows the DMA configuration procedures as described in - reference manual. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DMA according to the specified - * parameters in the DMA_InitTypeDef and create the associated handle. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) -{ - uint32_t tmp = 0U; - uint32_t tickstart = HAL_GetTick(); - DMA_Base_Registers *regs; - - /* Check the DMA peripheral state */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); - assert_param(IS_DMA_CHANNEL(hdma->Init.Channel)); - assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); - assert_param(IS_DMA_MODE(hdma->Init.Mode)); - assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); - assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode)); - /* Check the memory burst, peripheral burst and FIFO threshold parameters only - when FIFO mode is enabled */ - if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE) - { - assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold)); - assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst)); - assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst)); - } - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Allocate lock resource */ - __HAL_UNLOCK(hdma); - - /* Disable the peripheral */ - __HAL_DMA_DISABLE(hdma); - - /* Check if the DMA Stream is effectively disabled */ - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - return HAL_TIMEOUT; - } - } - - /* Get the CR register value */ - tmp = hdma->Instance->CR; - - /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */ - tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ - DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ - DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ - DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM)); - - /* Prepare the DMA Stream configuration */ - tmp |= hdma->Init.Channel | hdma->Init.Direction | - hdma->Init.PeriphInc | hdma->Init.MemInc | - hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | - hdma->Init.Mode | hdma->Init.Priority; - - /* the Memory burst and peripheral burst are not used when the FIFO is disabled */ - if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) - { - /* Get memory burst and peripheral burst */ - tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst; - } - - /* Write to DMA Stream CR register */ - hdma->Instance->CR = tmp; - - /* Get the FCR register value */ - tmp = hdma->Instance->FCR; - - /* Clear Direct mode and FIFO threshold bits */ - tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); - - /* Prepare the DMA Stream FIFO configuration */ - tmp |= hdma->Init.FIFOMode; - - /* The FIFO threshold is not used when the FIFO mode is disabled */ - if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) - { - /* Get the FIFO threshold */ - tmp |= hdma->Init.FIFOThreshold; - - /* Check compatibility between FIFO threshold level and size of the memory burst */ - /* for INCR4, INCR8, INCR16 bursts */ - if (hdma->Init.MemBurst != DMA_MBURST_SINGLE) - { - if (DMA_CheckFifoParam(hdma) != HAL_OK) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_PARAM; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_ERROR; - } - } - } - - /* Write to DMA Stream FCR */ - hdma->Instance->FCR = tmp; - - /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate - DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ - regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); - - /* Clear all interrupt flags */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Initialize the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the DMA peripheral - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) -{ - DMA_Base_Registers *regs; - - /* Check the DMA peripheral state */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the DMA peripheral state */ - if(hdma->State == HAL_DMA_STATE_BUSY) - { - /* Return error status */ - return HAL_BUSY; - } - - /* Check the parameters */ - assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); - - /* Disable the selected DMA Streamx */ - __HAL_DMA_DISABLE(hdma); - - /* Reset DMA Streamx control register */ - hdma->Instance->CR = 0U; - - /* Reset DMA Streamx number of data to transfer register */ - hdma->Instance->NDTR = 0U; - - /* Reset DMA Streamx peripheral address register */ - hdma->Instance->PAR = 0U; - - /* Reset DMA Streamx memory 0 address register */ - hdma->Instance->M0AR = 0U; - - /* Reset DMA Streamx memory 1 address register */ - hdma->Instance->M1AR = 0U; - - /* Reset DMA Streamx FIFO control register */ - hdma->Instance->FCR = 0x00000021U; - - /* Get DMA steam Base Address */ - regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); - - /* Clean all callbacks */ - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferM1CpltCallback = NULL; - hdma->XferM1HalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Reset the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Reset the DMA state */ - hdma->State = HAL_DMA_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return HAL_OK; -} - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group2 - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and Start DMA transfer - (+) Configure the source, destination address and data length and - Start DMA transfer with interrupt - (+) Abort DMA transfer - (+) Poll for transfer complete - (+) Handle DMA interrupt request - -@endverbatim - * @{ - */ - -/** - * @brief Starts the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Start the DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Enable Common interrupts*/ - hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; - - if(hdma->XferHalfCpltCallback != NULL) - { - hdma->Instance->CR |= DMA_IT_HT; - } - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - - return status; -} - -/** - * @brief Aborts the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * - * @note After disabling a DMA Stream, a check for wait until the DMA Stream is - * effectively disabled is added. If a Stream is disabled - * while a data transfer is ongoing, the current data will be transferred - * and the Stream will be effectively disabled only after the transfer of - * this single data is finished. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) -{ - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - uint32_t tickstart = HAL_GetTick(); - - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - else - { - /* Disable all the transfer interrupts */ - hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); - hdma->Instance->FCR &= ~(DMA_IT_FE); - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - - /* Check if the DMA Stream is effectively disabled */ - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_TIMEOUT; - } - } - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Change the DMA state*/ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - return HAL_OK; -} - -/** - * @brief Aborts the DMA Transfer in Interrupt mode. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) -{ - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - return HAL_ERROR; - } - else - { - /* Set Abort State */ - hdma->State = HAL_DMA_STATE_ABORT; - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - } - - return HAL_OK; -} - -/** - * @brief Polling for transfer complete. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CompleteLevel Specifies the DMA level complete. - * @note The polling mode is kept in this version for legacy. it is recommended to use the IT model instead. - * This model could be used for debug purpose. - * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode). - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t mask_cpltlevel; - uint32_t tickstart = HAL_GetTick(); - uint32_t tmpisr; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs; - - if(HAL_DMA_STATE_BUSY != hdma->State) - { - /* No transfer ongoing */ - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - __HAL_UNLOCK(hdma); - return HAL_ERROR; - } - - /* Polling mode not supported in circular mode and double buffering mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Transfer Complete flag */ - mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; - } - else - { - /* Half Transfer Complete flag */ - mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; - } - - regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - tmpisr = regs->ISR; - - while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET)) - { - /* Check for the Timeout (Not applicable in circular mode)*/ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_TIMEOUT; - } - } - - /* Get the ISR register value */ - tmpisr = regs->ISR; - - if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_TE; - - /* Clear the transfer error flag */ - regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; - } - - if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_FE; - - /* Clear the FIFO error flag */ - regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; - } - - if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_DME; - - /* Clear the Direct Mode error flag */ - regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; - } - } - - if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) - { - if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) - { - HAL_DMA_Abort(hdma); - - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - - /* Change the DMA state */ - hdma->State= HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - } - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - else - { - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex; - } - - return status; -} - -/** - * @brief Handles DMA interrupt request. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval None - */ -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) -{ - uint32_t tmpisr; - __IO uint32_t count = 0U; - uint32_t timeout = SystemCoreClock / 9600U; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - tmpisr = regs->ISR; - - /* Transfer Error Interrupt management ***************************************/ - if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET) - { - /* Disable the transfer error interrupt */ - hdma->Instance->CR &= ~(DMA_IT_TE); - - /* Clear the transfer error flag */ - regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_TE; - } - } - /* FIFO Error Interrupt management ******************************************/ - if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET) - { - /* Clear the FIFO error flag */ - regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_FE; - } - } - /* Direct Mode Error Interrupt management ***********************************/ - if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET) - { - /* Clear the direct mode error flag */ - regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_DME; - } - } - /* Half Transfer Complete Interrupt management ******************************/ - if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET) - { - /* Clear the half transfer complete flag */ - regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; - - /* Multi_Buffering mode enabled */ - if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) - { - /* Current memory buffer used is Memory 0 */ - if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) - { - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - /* Current memory buffer used is Memory 1 */ - else - { - if(hdma->XferM1HalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferM1HalfCpltCallback(hdma); - } - } - } - else - { - /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ - if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) - { - /* Disable the half transfer interrupt */ - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - } - } - /* Transfer Complete Interrupt management ***********************************/ - if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET) - { - /* Clear the transfer complete flag */ - regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; - - if(HAL_DMA_STATE_ABORT == hdma->State) - { - /* Disable all the transfer interrupts */ - hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); - hdma->Instance->FCR &= ~(DMA_IT_FE); - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if(hdma->XferAbortCallback != NULL) - { - hdma->XferAbortCallback(hdma); - } - return; - } - - if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) - { - /* Current memory buffer used is Memory 0 */ - if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) - { - if(hdma->XferM1CpltCallback != NULL) - { - /* Transfer complete Callback for memory1 */ - hdma->XferM1CpltCallback(hdma); - } - } - /* Current memory buffer used is Memory 1 */ - else - { - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete Callback for memory0 */ - hdma->XferCpltCallback(hdma); - } - } - } - /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ - else - { - if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) - { - /* Disable the transfer complete interrupt */ - hdma->Instance->CR &= ~(DMA_IT_TC); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete callback */ - hdma->XferCpltCallback(hdma); - } - } - } - } - - /* manage error case */ - if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) - { - if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) - { - hdma->State = HAL_DMA_STATE_ABORT; - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - - do - { - if (++count > timeout) - { - break; - } - } - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - - if(hdma->XferErrorCallback != NULL) - { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); - } - } -} - -/** - * @brief Register callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifier - * a DMA_HandleTypeDef structure as parameter. - * @param pCallback pointer to private callback function which has pointer to - * a DMA_HandleTypeDef structure as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) -{ - - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_M1CPLT_CB_ID: - hdma->XferM1CpltCallback = pCallback; - break; - - case HAL_DMA_XFER_M1HALFCPLT_CB_ID: - hdma->XferM1HalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = pCallback; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = pCallback; - break; - - default: - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @brief UnRegister callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifier - * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = NULL; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_M1CPLT_CB_ID: - hdma->XferM1CpltCallback = NULL; - break; - - case HAL_DMA_XFER_M1HALFCPLT_CB_ID: - hdma->XferM1HalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = NULL; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = NULL; - break; - - case HAL_DMA_XFER_ALL_CB_ID: - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferM1CpltCallback = NULL; - hdma->XferM1HalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - break; - - default: - status = HAL_ERROR; - break; - } - } - else - { - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group3 - * -@verbatim - =============================================================================== - ##### State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DMA state - (+) Get error code - -@endverbatim - * @{ - */ - -/** - * @brief Returns the DMA state. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL state - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) -{ - return hdma->State; -} - -/** - * @brief Return the DMA error code - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval DMA Error Code - */ -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) -{ - return hdma->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMA_Private_Functions - * @{ - */ - -/** - * @brief Sets the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Clear DBM bit */ - hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM); - - /* Configure DMA Stream data length */ - hdma->Instance->NDTR = DataLength; - - /* Memory to Peripheral */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Stream destination address */ - hdma->Instance->PAR = DstAddress; - - /* Configure DMA Stream source address */ - hdma->Instance->M0AR = SrcAddress; - } - /* Peripheral to Memory */ - else - { - /* Configure DMA Stream source address */ - hdma->Instance->PAR = SrcAddress; - - /* Configure DMA Stream destination address */ - hdma->Instance->M0AR = DstAddress; - } -} - -/** - * @brief Returns the DMA Stream base address depending on stream number - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval Stream base address - */ -static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) -{ - uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U; - - /* lookup table for necessary bitshift of flags within status registers */ - static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U}; - hdma->StreamIndex = flagBitshiftOffset[stream_number]; - - if (stream_number > 3U) - { - /* return pointer to HISR and HIFCR */ - hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U); - } - else - { - /* return pointer to LISR and LIFCR */ - hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)); - } - - return hdma->StreamBaseAddress; -} - -/** - * @brief Check compatibility between FIFO threshold level and size of the memory burst - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmp = hdma->Init.FIFOThreshold; - - /* Memory Data size equal to Byte */ - if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE) - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_HALFFULL: - if (hdma->Init.MemBurst == DMA_MBURST_INC16) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_FULL: - break; - default: - break; - } - } - - /* Memory Data size equal to Half-Word */ - else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - status = HAL_ERROR; - break; - case DMA_FIFO_THRESHOLD_HALFFULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_FULL: - if (hdma->Init.MemBurst == DMA_MBURST_INC16) - { - status = HAL_ERROR; - } - break; - default: - break; - } - } - - /* Memory Data size equal to Word */ - else - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_HALFFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - status = HAL_ERROR; - break; - case DMA_FIFO_THRESHOLD_FULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - default: - break; - } - } - - return status; -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c deleted file mode 100644 index 7167e77..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c +++ /dev/null @@ -1,313 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma_ex.c - * @author MCD Application Team - * @brief DMA Extension HAL module driver - * This file provides firmware functions to manage the following - * functionalities of the DMA Extension peripheral: - * + Extended features functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The DMA Extension HAL driver can be used as follows: - (#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function - for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode. - - -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. - -@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default. - -@- In Multi (Double) buffer mode, it is possible to update the base address for - the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMAEx DMAEx - * @brief DMA Extended HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private Constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DMAEx_Private_Functions - * @{ - */ -static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @addtogroup DMAEx_Exported_Functions - * @{ - */ - - -/** @addtogroup DMAEx_Exported_Functions_Group1 - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and - Start MultiBuffer DMA transfer - (+) Configure the source, destination address and data length and - Start MultiBuffer DMA transfer with interrupt - (+) Change on the fly the memory0 or memory1 address. - -@endverbatim - * @{ - */ - - -/** - * @brief Starts the multi_buffer DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Memory-to-memory transfer not supported in double buffering mode */ - if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - status = HAL_ERROR; - } - else - { - /* Process Locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Enable the double buffer mode */ - hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; - - /* Configure DMA Stream destination address */ - hdma->Instance->M1AR = SecondMemAddress; - - /* Configure the source, destination address and the data length */ - DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Return error status */ - status = HAL_BUSY; - } - } - return status; -} - -/** - * @brief Starts the multi_buffer DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Memory-to-memory transfer not supported in double buffering mode */ - if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Check callback functions */ - if ((NULL == hdma->XferCpltCallback) || (NULL == hdma->XferM1CpltCallback) || (NULL == hdma->XferErrorCallback)) - { - hdma->ErrorCode = HAL_DMA_ERROR_PARAM; - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Enable the Double buffer mode */ - hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; - - /* Configure DMA Stream destination address */ - hdma->Instance->M1AR = SecondMemAddress; - - /* Configure the source, destination address and the data length */ - DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Clear all flags */ - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma)); - - /* Enable Common interrupts*/ - hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; - hdma->Instance->FCR |= DMA_IT_FE; - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR |= DMA_IT_HT; - } - - /* Enable the peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Change the memory0 or memory1 address on the fly. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param Address The new address - * @param memory the memory to be changed, This parameter can be one of - * the following values: - * MEMORY0 / - * MEMORY1 - * @note The MEMORY0 address can be changed only when the current transfer use - * MEMORY1 and the MEMORY1 address can be changed only when the current - * transfer use MEMORY0. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory) -{ - if(memory == MEMORY0) - { - /* change the memory0 address */ - hdma->Instance->M0AR = Address; - } - else - { - /* change the memory1 address */ - hdma->Instance->M1AR = Address; - } - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMAEx_Private_Functions - * @{ - */ - -/** - * @brief Set the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Configure DMA Stream data length */ - hdma->Instance->NDTR = DataLength; - - /* Peripheral to Memory */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Stream destination address */ - hdma->Instance->PAR = DstAddress; - - /* Configure DMA Stream source address */ - hdma->Instance->M0AR = SrcAddress; - } - /* Memory to Peripheral */ - else - { - /* Configure DMA Stream source address */ - hdma->Instance->PAR = SrcAddress; - - /* Configure DMA Stream destination address */ - hdma->Instance->M0AR = DstAddress; - } -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c deleted file mode 100644 index 04b5215..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c +++ /dev/null @@ -1,547 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_exti.c - * @author MCD Application Team - * @brief EXTI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2018 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### EXTI Peripheral features ##### - ============================================================================== - [..] - (+) Each Exti line can be configured within this driver. - - (+) Exti line can be configured in 3 different modes - (++) Interrupt - (++) Event - (++) Both of them - - (+) Configurable Exti lines can be configured with 3 different triggers - (++) Rising - (++) Falling - (++) Both of them - - (+) When set in interrupt mode, configurable Exti lines have two different - interrupts pending registers which allow to distinguish which transition - occurs: - (++) Rising edge pending interrupt - (++) Falling - - (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can - be selected through multiplexer. - - ##### How to use this driver ##### - ============================================================================== - [..] - - (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). - (++) Choose the interrupt line number by setting "Line" member from - EXTI_ConfigTypeDef structure. - (++) Configure the interrupt and/or event mode using "Mode" member from - EXTI_ConfigTypeDef structure. - (++) For configurable lines, configure rising and/or falling trigger - "Trigger" member from EXTI_ConfigTypeDef structure. - (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" - member from GPIO_InitTypeDef structure. - - (#) Get current Exti configuration of a dedicated line using - HAL_EXTI_GetConfigLine(). - (++) Provide exiting handle as parameter. - (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. - - (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). - (++) Provide exiting handle as parameter. - - (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). - (++) Provide exiting handle as first parameter. - (++) Provide which callback will be registered using one value from - EXTI_CallbackIDTypeDef. - (++) Provide callback function pointer. - - (#) Get interrupt pending bit using HAL_EXTI_GetPending(). - - (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). - - (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup EXTI - * @{ - */ -/** MISRA C:2012 deviation rule has been granted for following rule: - * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out - * of bounds [0,3] in following API : - * HAL_EXTI_SetConfigLine - * HAL_EXTI_GetConfigLine - * HAL_EXTI_ClearConfigLine - */ - -#ifdef HAL_EXTI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/** @defgroup EXTI_Private_Constants EXTI Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup EXTI_Exported_Functions - * @{ - */ - -/** @addtogroup EXTI_Exported_Functions_Group1 - * @brief Configuration functions - * -@verbatim - =============================================================================== - ##### Configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Set configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @param pExtiConfig Pointer on EXTI configuration to be set. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) -{ - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - - /* Check null pointer */ - if ((hexti == NULL) || (pExtiConfig == NULL)) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_EXTI_LINE(pExtiConfig->Line)); - assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); - - /* Assign line number to handle */ - hexti->Line = pExtiConfig->Line; - - /* Compute line mask */ - linepos = (pExtiConfig->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* Configure triggers for configurable lines */ - if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) - { - assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); - - /* Configure rising trigger */ - /* Mask or set line */ - if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) - { - EXTI->RTSR |= maskline; - } - else - { - EXTI->RTSR &= ~maskline; - } - - /* Configure falling trigger */ - /* Mask or set line */ - if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) - { - EXTI->FTSR |= maskline; - } - else - { - EXTI->FTSR &= ~maskline; - } - - - /* Configure gpio port selection in case of gpio exti line */ - if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = SYSCFG->EXTICR[linepos >> 2u]; - regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - SYSCFG->EXTICR[linepos >> 2u] = regval; - } - } - - /* Configure interrupt mode : read current mode */ - /* Mask or set line */ - if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) - { - EXTI->IMR |= maskline; - } - else - { - EXTI->IMR &= ~maskline; - } - - /* Configure event mode : read current mode */ - /* Mask or set line */ - if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) - { - EXTI->EMR |= maskline; - } - else - { - EXTI->EMR &= ~maskline; - } - - return HAL_OK; -} - -/** - * @brief Get configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @param pExtiConfig Pointer on structure to store Exti configuration. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) -{ - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - - /* Check null pointer */ - if ((hexti == NULL) || (pExtiConfig == NULL)) - { - return HAL_ERROR; - } - - /* Check the parameter */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - /* Store handle line number to configuration structure */ - pExtiConfig->Line = hexti->Line; - - /* Compute line mask */ - linepos = (pExtiConfig->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* 1] Get core mode : interrupt */ - - /* Check if selected line is enable */ - if ((EXTI->IMR & maskline) != 0x00u) - { - pExtiConfig->Mode = EXTI_MODE_INTERRUPT; - } - else - { - pExtiConfig->Mode = EXTI_MODE_NONE; - } - - /* Get event mode */ - /* Check if selected line is enable */ - if ((EXTI->EMR & maskline) != 0x00u) - { - pExtiConfig->Mode |= EXTI_MODE_EVENT; - } - - /* Get default Trigger and GPIOSel configuration */ - pExtiConfig->Trigger = EXTI_TRIGGER_NONE; - pExtiConfig->GPIOSel = 0x00u; - - /* 2] Get trigger for configurable lines : rising */ - if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) - { - /* Check if configuration of selected line is enable */ - if ((EXTI->RTSR & maskline) != 0x00u) - { - pExtiConfig->Trigger = EXTI_TRIGGER_RISING; - } - - /* Get falling configuration */ - /* Check if configuration of selected line is enable */ - if ((EXTI->FTSR & maskline) != 0x00u) - { - pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; - } - - /* Get Gpio port selection for gpio lines */ - if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = (SYSCFG->EXTICR[linepos >> 2u] << 16u ); - pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 28u); - } - } - - return HAL_OK; -} - -/** - * @brief Clear whole configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) -{ - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - - /* Check null pointer */ - if (hexti == NULL) - { - return HAL_ERROR; - } - - /* Check the parameter */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - /* compute line mask */ - linepos = (hexti->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* 1] Clear interrupt mode */ - EXTI->IMR = (EXTI->IMR & ~maskline); - - /* 2] Clear event mode */ - EXTI->EMR = (EXTI->EMR & ~maskline); - - /* 3] Clear triggers in case of configurable lines */ - if ((hexti->Line & EXTI_CONFIG) != 0x00u) - { - EXTI->RTSR = (EXTI->RTSR & ~maskline); - EXTI->FTSR = (EXTI->FTSR & ~maskline); - - /* Get Gpio port selection for gpio lines */ - if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = SYSCFG->EXTICR[linepos >> 2u]; - regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - SYSCFG->EXTICR[linepos >> 2u] = regval; - } - } - - return HAL_OK; -} - -/** - * @brief Register callback for a dedicated Exti line. - * @param hexti Exti handle. - * @param CallbackID User callback identifier. - * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. - * @param pPendingCbfn function pointer to be stored as callback. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) -{ - HAL_StatusTypeDef status = HAL_OK; - - switch (CallbackID) - { - case HAL_EXTI_COMMON_CB_ID: - hexti->PendingCallback = pPendingCbfn; - break; - - default: - status = HAL_ERROR; - break; - } - - return status; -} - -/** - * @brief Store line number as handle private field. - * @param hexti Exti handle. - * @param ExtiLine Exti line number. - * This parameter can be from 0 to @ref EXTI_LINE_NB. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(ExtiLine)); - - /* Check null pointer */ - if (hexti == NULL) - { - return HAL_ERROR; - } - else - { - /* Store line number as handle private field */ - hexti->Line = ExtiLine; - - return HAL_OK; - } -} - -/** - * @} - */ - -/** @addtogroup EXTI_Exported_Functions_Group2 - * @brief EXTI IO functions. - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Handle EXTI interrupt request. - * @param hexti Exti handle. - * @retval none. - */ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) -{ - uint32_t regval; - uint32_t maskline; - - /* Compute line mask */ - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - /* Get pending bit */ - regval = (EXTI->PR & maskline); - if (regval != 0x00u) - { - /* Clear pending bit */ - EXTI->PR = maskline; - - /* Call callback */ - if (hexti->PendingCallback != NULL) - { - hexti->PendingCallback(); - } - } -} - -/** - * @brief Get interrupt pending bit of a dedicated line. - * @param hexti Exti handle. - * @param Edge Specify which pending edge as to be checked. - * This parameter can be one of the following values: - * @arg @ref EXTI_TRIGGER_RISING_FALLING - * This parameter is kept for compatibility with other series. - * @retval 1 if interrupt is pending else 0. - */ -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) -{ - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - assert_param(IS_EXTI_PENDING_EDGE(Edge)); - - /* Compute line mask */ - linepos = (hexti->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* return 1 if bit is set else 0 */ - regval = ((EXTI->PR & maskline) >> linepos); - return regval; -} - -/** - * @brief Clear interrupt pending bit of a dedicated line. - * @param hexti Exti handle. - * @param Edge Specify which pending edge as to be clear. - * This parameter can be one of the following values: - * @arg @ref EXTI_TRIGGER_RISING_FALLING - * This parameter is kept for compatibility with other series. - * @retval None. - */ -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) -{ - uint32_t maskline; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - assert_param(IS_EXTI_PENDING_EDGE(Edge)); - - /* Compute line mask */ - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - /* Clear Pending bit */ - EXTI->PR = maskline; -} - -/** - * @brief Generate a software interrupt for a dedicated line. - * @param hexti Exti handle. - * @retval None. - */ -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) -{ - uint32_t maskline; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - - /* Compute line mask */ - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - /* Generate Software interrupt */ - EXTI->SWIER = maskline; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_EXTI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c deleted file mode 100644 index 2830da0..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c +++ /dev/null @@ -1,775 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash.c - * @author MCD Application Team - * @brief FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the internal FLASH memory: - * + Program operations functions - * + Memory Control functions - * + Peripheral Errors functions - * - @verbatim - ============================================================================== - ##### FLASH peripheral features ##### - ============================================================================== - - [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses - to the Flash memory. It implements the erase and program Flash memory operations - and the read and write protection mechanisms. - - [..] The Flash memory interface accelerates code execution with a system of instruction - prefetch and cache lines. - - [..] The FLASH main features are: - (+) Flash memory read operations - (+) Flash memory program/erase operations - (+) Read / write protections - (+) Prefetch on I-Code - (+) 64 cache lines of 128 bits on I-Code - (+) 8 cache lines of 128 bits on D-Code - - - ##### How to use this driver ##### - ============================================================================== - [..] - This driver provides functions and macros to configure and program the FLASH - memory of all STM32F4xx devices. - - (#) FLASH Memory IO Programming functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Program functions: byte, half word, word and double word - (++) There Two modes of programming : - (+++) Polling mode using HAL_FLASH_Program() function - (+++) Interrupt mode using HAL_FLASH_Program_IT() function - - (#) Interrupts and flags management functions : - (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() - (++) Wait for last FLASH operation according to its status - (++) Get error flag status by calling HAL_SetErrorCode() - - [..] - In addition to these functions, this driver includes a set of macros allowing - to handle the following operations: - (+) Set the latency - (+) Enable/Disable the prefetch buffer - (+) Enable/Disable the Instruction cache and the Data cache - (+) Reset the Instruction cache and the Data cache - (+) Enable/Disable the FLASH interrupts - (+) Monitor the FLASH flags status - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH FLASH - * @brief FLASH HAL module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Constants - * @{ - */ -#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Variables - * @{ - */ -/* Variable used for Erase sectors under interruption */ -FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FLASH_Private_Functions - * @{ - */ -/* Program operations */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); -static void FLASH_Program_Word(uint32_t Address, uint32_t Data); -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); -static void FLASH_Program_Byte(uint32_t Address, uint8_t Data); -static void FLASH_SetErrorCode(void); - -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Functions FLASH Exported Functions - * @{ - */ - -/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions - * @brief Programming operation functions - * -@verbatim - =============================================================================== - ##### Programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the FLASH - program operations. - -@endverbatim - * @{ - */ - -/** - * @brief Program byte, halfword, word or double word at a specified address - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) - { - /*Program byte (8-bit) at a specified address.*/ - FLASH_Program_Byte(Address, (uint8_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) - { - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) - { - /*Program word (32-bit) at a specified address.*/ - FLASH_Program_Word(Address, (uint32_t) Data); - } - else - { - /*Program double word (64-bit) at a specified address.*/ - FLASH_Program_DoubleWord(Address, Data); - } - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled. - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Enable End of FLASH Operation interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - - /* Enable Error source interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; - pFlash.Address = Address; - - if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) - { - /*Program byte (8-bit) at a specified address.*/ - FLASH_Program_Byte(Address, (uint8_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) - { - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) - { - /*Program word (32-bit) at a specified address.*/ - FLASH_Program_Word(Address, (uint32_t) Data); - } - else - { - /*Program double word (64-bit) at a specified address.*/ - FLASH_Program_DoubleWord(Address, Data); - } - - return status; -} - -/** - * @brief This function handles FLASH interrupt request. - * @retval None - */ -void HAL_FLASH_IRQHandler(void) -{ - uint32_t addresstmp = 0U; - - /* Check FLASH operation error flags */ -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) -#else - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) -#endif /* FLASH_SR_RDERR */ - { - if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) - { - /*return the faulty sector*/ - addresstmp = pFlash.Sector; - pFlash.Sector = 0xFFFFFFFFU; - } - else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) - { - /*return the faulty bank*/ - addresstmp = pFlash.Bank; - } - else - { - /*return the faulty address*/ - addresstmp = pFlash.Address; - } - - /*Save the Error code*/ - FLASH_SetErrorCode(); - - /* FLASH error interrupt user callback */ - HAL_FLASH_OperationErrorCallback(addresstmp); - - /*Stop the procedure ongoing*/ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - - /* Check FLASH End of Operation flag */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - - if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) - { - /*Nb of sector to erased can be decreased*/ - pFlash.NbSectorsToErase--; - - /* Check if there are still sectors to erase*/ - if(pFlash.NbSectorsToErase != 0U) - { - addresstmp = pFlash.Sector; - /*Indicate user which sector has been erased*/ - HAL_FLASH_EndOfOperationCallback(addresstmp); - - /*Increment sector number*/ - pFlash.Sector++; - addresstmp = pFlash.Sector; - FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase); - } - else - { - /*No more sectors to Erase, user callback can be called.*/ - /*Reset Sector and stop Erase sectors procedure*/ - pFlash.Sector = addresstmp = 0xFFFFFFFFU; - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(addresstmp); - } - } - else - { - if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) - { - /* MassErase ended. Return the selected bank */ - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Bank); - } - else - { - /*Program ended. Return the selected address*/ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - } - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - } - - if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) - { - /* Operation is completed, disable the PG, SER, SNB and MER Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT)); - - /* Disable End of FLASH Operation interrupt */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP); - - /* Disable Error source interrupt */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR); - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - } -} - -/** - * @brief FLASH end of operation interrupt callback - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: Bank number which has been requested to erase - * Sectors Erase: Sector which has been erased - * (if 0xFFFFFFFFU, it means that all the selected sectors have been erased) - * Program: Address which was selected for data program - * @retval None - */ -__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_EndOfOperationCallback could be implemented in the user file - */ -} - -/** - * @brief FLASH operation error interrupt callback - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: Bank number which has been requested to erase - * Sectors Erase: Sector number which returned an error - * Program: Address which was selected for data program - * @retval None - */ -__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_OperationErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the FLASH - memory operations. - -@endverbatim - * @{ - */ - -/** - * @brief Unlock the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Unlock(void) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) - { - /* Authorize the FLASH Registers access */ - WRITE_REG(FLASH->KEYR, FLASH_KEY1); - WRITE_REG(FLASH->KEYR, FLASH_KEY2); - - /* Verify Flash is unlocked */ - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) - { - status = HAL_ERROR; - } - } - - return status; -} - -/** - * @brief Locks the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Lock(void) -{ - /* Set the LOCK Bit to lock the FLASH Registers access */ - FLASH->CR |= FLASH_CR_LOCK; - - return HAL_OK; -} - -/** - * @brief Unlock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) -{ - if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) - { - /* Authorizes the Option Byte register programming */ - FLASH->OPTKEYR = FLASH_OPT_KEY1; - FLASH->OPTKEYR = FLASH_OPT_KEY2; - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Lock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) -{ - /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ - FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; - - return HAL_OK; -} - -/** - * @brief Launch the option byte loading. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) -{ - /* Set the OPTSTRT bit in OPTCR register */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT; - - /* Wait for last operation to be completed */ - return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time Errors of the FLASH peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Get the specific FLASH error flag. - * @retval FLASH_ErrorCode: The returned value can be a combination of: - * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP) - * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag - * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag - * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag - * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag - * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag - */ -uint32_t HAL_FLASH_GetError(void) -{ - return pFlash.ErrorCode; -} - -/** - * @} - */ - -/** - * @brief Wait for a FLASH operation to complete. - * @param Timeout maximum flash operationtimeout - * @retval HAL Status - */ -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Clear Error Code */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. - Even if the FLASH operation fails, the BUSY flag will be reset and an error - flag will be set */ - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) - { - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - /* Check FLASH End of Operation flag */ - if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - } -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) -#else - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) -#endif /* FLASH_SR_RDERR */ - { - /*Save the error code*/ - FLASH_SetErrorCode(); - return HAL_ERROR; - } - - /* If there is no error flag set */ - return HAL_OK; - -} - -/** - * @brief Program a double word (64-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V and Vpp in the range 7V to 9V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD; - FLASH->CR |= FLASH_CR_PG; - - /* Program first word */ - *(__IO uint32_t*)Address = (uint32_t)Data; - - /* Barrier to ensure programming is performed in 2 steps, in right order - (independently of compiler optimization behavior) */ - __ISB(); - - /* Program second word */ - *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32); -} - - -/** - * @brief Program word (32-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_Word(uint32_t Address, uint32_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint32_t*)Address = Data; -} - -/** - * @brief Program a half-word (16-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.1V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_HALF_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint16_t*)Address = Data; -} - -/** - * @brief Program byte (8-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 1.8V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_Byte(uint32_t Address, uint8_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_BYTE; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint8_t*)Address = Data; -} - -/** - * @brief Set the specific FLASH error flag. - * @retval None - */ -static void FLASH_SetErrorCode(void) -{ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; - - /* Clear FLASH write protection error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA; - - /* Clear FLASH Programming alignment error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP; - - /* Clear FLASH Programming parallelism error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS; - - /* Clear FLASH Programming sequence error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR); - } -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_RD; - - /* Clear FLASH Proprietary readout protection error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR); - } -#endif /* FLASH_SR_RDERR */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION; - - /* Clear FLASH Operation error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR); - } -} - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c deleted file mode 100644 index d99eace..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c +++ /dev/null @@ -1,1347 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ex.c - * @author MCD Application Team - * @brief Extended FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the FLASH extension peripheral: - * + Extended programming operations functions - * - @verbatim - ============================================================================== - ##### Flash Extension features ##### - ============================================================================== - - [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and - STM32F429xx/439xx devices contains the following additional features - - (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write - capability (RWW) - (+) Dual bank memory organization - (+) PCROP protection for all banks - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure and program the FLASH memory - of all STM32F427xx/437xx, STM32F429xx/439xx, STM32F469xx/479xx and STM32F446xx - devices. It includes - (#) FLASH Memory Erase functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Erase function: Erase sector, erase all sectors - (++) There are two modes of erase : - (+++) Polling Mode using HAL_FLASHEx_Erase() - (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() - - (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to : - (++) Set/Reset the write protection - (++) Set the Read protection Level - (++) Set the BOR level - (++) Program the user Option Bytes - (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to : - (++) Extended space (bank 2) erase function - (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2) - (++) Dual Boot activation - (++) Write protection configuration for bank 2 - (++) PCROP protection configuration and control for both banks - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASHEx FLASHEx - * @brief FLASH HAL Extension module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Constants - * @{ - */ -#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Variables - * @{ - */ -extern FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Functions - * @{ - */ -/* Option bytes control */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level); -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby); -static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level); -static uint8_t FLASH_OB_GetUser(void); -static uint16_t FLASH_OB_GetWRP(void); -static uint8_t FLASH_OB_GetRDP(void); -static uint8_t FLASH_OB_GetBOR(void); - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector); -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions - * @{ - */ - -/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions - * @brief Extended IO operation functions - * -@verbatim - =============================================================================== - ##### Extended programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the Extension FLASH - programming operations. - -@endverbatim - * @{ - */ -/** - * @brief Perform a mass erase or erase the specified FLASH memory sectors - * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @param[out] SectorError pointer to variable that - * contains the configuration information on faulty sector in case of error - * (0xFFFFFFFFU means that all the sectors have been correctly erased) - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) -{ - HAL_StatusTypeDef status = HAL_ERROR; - uint32_t index = 0U; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Initialization of SectorError variable*/ - *SectorError = 0xFFFFFFFFU; - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= (~FLASH_MER_BIT); - } - else - { - /* Check the parameters */ - assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); - - /* Erase by sector by sector to be done*/ - for (index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++) - { - FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the SER and SNB Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB)); - - if (status != HAL_OK) - { - /* In case of error, stop erase procedure and return the faulty sector*/ - *SectorError = index; - break; - } - } - } - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches(); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled - * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Enable End of FLASH Operation interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - - /* Enable Error source interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - /* Clear pending flags (if any) */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | \ - FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ - pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; - pFlash.Bank = pEraseInit->Banks; - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); - } - else - { - /* Erase by sector to be done*/ - - /* Check the parameters */ - assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); - - pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE; - pFlash.NbSectorsToErase = pEraseInit->NbSectors; - pFlash.Sector = pEraseInit->Sector; - pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange; - - /*Erase 1st sector and wait for IT*/ - FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange); - } - - return status; -} - -/** - * @brief Program option bytes - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); - - /*Write protection configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) - { - assert_param(IS_WRPSTATE(pOBInit->WRPState)); - if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) - { - /*Enable of Write protection on the selected Sector*/ - status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks); - } - else - { - /*Disable of Write protection on the selected Sector*/ - status = FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks); - } - } - - /*Read protection configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) - { - status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); - } - - /*USER configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) - { - status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_IWDG_SW, - pOBInit->USERConfig & OB_STOP_NO_RST, - pOBInit->USERConfig & OB_STDBY_NO_RST); - } - - /*BOR Level configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) - { - status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Get the Option byte configuration - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval None - */ -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) -{ - pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR; - - /*Get WRP*/ - pOBInit->WRPSector = (uint32_t)FLASH_OB_GetWRP(); - - /*Get RDP Level*/ - pOBInit->RDPLevel = (uint32_t)FLASH_OB_GetRDP(); - - /*Get USER*/ - pOBInit->USERConfig = (uint8_t)FLASH_OB_GetUser(); - - /*Get BOR Level*/ - pOBInit->BORLevel = (uint32_t)FLASH_OB_GetBOR(); -} - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Program option bytes - * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that - * contains the configuration information for the programming. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Check the parameters */ - assert_param(IS_OBEX(pAdvOBInit->OptionType)); - - /*Program PCROP option byte*/ - if (((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP) - { - /* Check the parameters */ - assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState)); - if ((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE) - { - /*Enable of Write protection on the selected Sector*/ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - status = FLASH_OB_EnablePCROP(pAdvOBInit->Sectors); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - status = FLASH_OB_EnablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - } - else - { - /*Disable of Write protection on the selected Sector*/ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - status = FLASH_OB_DisablePCROP(pAdvOBInit->Sectors); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - status = FLASH_OB_DisablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - } - } - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - /*Program BOOT config option byte*/ - if (((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG) - { - status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig); - } -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - - return status; -} - -/** - * @brief Get the OBEX byte configuration - * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that - * contains the configuration information for the programming. - * - * @retval None - */ -void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) -{ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /*Get Sector*/ - pAdvOBInit->Sectors = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - /*Get Sector for Bank1*/ - pAdvOBInit->SectorsBank1 = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); - - /*Get Sector for Bank2*/ - pAdvOBInit->SectorsBank2 = (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); - - /*Get Boot config OB*/ - pAdvOBInit->BootConfig = *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS; -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ -} - -/** - * @brief Select the Protection Mode - * - * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted - * Global Read Out Protection modification (from level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible - * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ - * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void) -{ - uint8_t optiontmp = 0xFF; - - /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - - /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp); - - return HAL_OK; -} - -/** - * @brief Deselect the Protection Mode - * - * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted - * Global Read Out Protection modification (from level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible - * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ - * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void) -{ - uint8_t optiontmp = 0xFF; - - /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - - /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp); - - return HAL_OK; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx ||\ - STM32F411xE || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Returns the FLASH Write Protection Option Bytes value for Bank 2 - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx devices. - * @retval The FLASH Write Protection Option Bytes value - */ -uint16_t HAL_FLASHEx_OB_GetBank2WRP(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Full erase of FLASH memory sectors - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * @arg FLASH_BANK_2: Bank2 to be erased - * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased - * - * @retval HAL Status - */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_VOLTAGERANGE(VoltageRange)); - assert_param(IS_FLASH_BANK(Banks)); - - /* if the previous operation is completed, proceed to erase all sectors */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - - if (Banks == FLASH_BANK_BOTH) - { - /* bank1 & bank2 will be erased*/ - FLASH->CR |= FLASH_MER_BIT; - } - else if (Banks == FLASH_BANK_1) - { - /*Only bank1 will be erased*/ - FLASH->CR |= FLASH_CR_MER1; - } - else - { - /*Only bank2 will be erased*/ - FLASH->CR |= FLASH_CR_MER2; - } - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); -} - -/** - * @brief Erase the specified FLASH memory sector - * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval None - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0U; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if (VoltageRange == FLASH_VOLTAGE_RANGE_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - - /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */ - if (Sector > FLASH_SECTOR_11) - { - Sector += 4U; - } - /* If the previous operation is completed, proceed to erase the sector */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= tmp_psize; - CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); - FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); - FLASH->CR |= FLASH_CR_STRT; -} - -/** - * @brief Enable the write protection of the desired bank1 or bank 2 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * This parameter can be one of the following values: - * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 - * @arg OB_WRP_SECTOR_All - * @note BANK2 starts from OB_WRP_SECTOR_12 - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL FLASH State - */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || - (WRPSector < OB_WRP_SECTOR_12)) - { - if (WRPSector == OB_WRP_SECTOR_All) - { - /*Write protection on all sector of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - else - { - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); - } - } - else - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - - /*Write protection on all sector of BANK2*/ - if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - } - - } - return status; -} - -/** - * @brief Disable the write protection of the desired bank1 or bank 2 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * This parameter can be one of the following values: - * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 - * @arg OB_WRP_Sector_All - * @note BANK2 starts from OB_WRP_SECTOR_12 - * - * @param Banks Disable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * @arg FLASH_BANK_2: Bank2 to be erased - * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || - (WRPSector < OB_WRP_SECTOR_12)) - { - if (WRPSector == OB_WRP_SECTOR_All) - { - /*Write protection on all sector of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - else - { - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; - } - } - else - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - - /*Write protection on all sector of BANK2*/ - if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - } - - } - - return status; -} - -/** - * @brief Configure the Dual Bank Boot. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @param BootConfig specifies the Dual Bank Boot Option byte. - * This parameter can be one of the following values: - * @arg OB_Dual_BootEnabled: Dual Bank Boot Enable - * @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled - * @retval None - */ -static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_BOOT(BootConfig)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /* Set Dual Bank Boot */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2); - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig; - } - - return status; -} - -/** - * @brief Enable the read/write protection (PCROP) of the desired - * sectors of Bank 1 and/or Bank 2. - * @note This function can be used only for STM32F42xxx/43xxx devices. - * @param SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 - * @arg OB_PCROP_SECTOR__All - * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 - * @arg OB_PCROP_SECTOR__All - * @param Banks Enable PCROP protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) - { - assert_param(IS_OB_PCROP(SectorBank1)); - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1; - } - else - { - assert_param(IS_OB_PCROP(SectorBank2)); - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; - } - - /*Write protection on all sector of BANK2*/ - if (Banks == FLASH_BANK_BOTH) - { - assert_param(IS_OB_PCROP(SectorBank2)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; - } - } - - } - - return status; -} - - -/** - * @brief Disable the read/write protection (PCROP) of the desired - * sectors of Bank 1 and/or Bank 2. - * @note This function can be used only for STM32F42xxx/43xxx devices. - * @param SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 - * @arg OB_PCROP_SECTOR__All - * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 - * @arg OB_PCROP_SECTOR__All - * @param Banks Disable PCROP protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) - { - assert_param(IS_OB_PCROP(SectorBank1)); - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~SectorBank1); - } - else - { - /*Write protection done on sectors of BANK2*/ - assert_param(IS_OB_PCROP(SectorBank2)); - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); - } - - /*Write protection on all sector of BANK2*/ - if (Banks == FLASH_BANK_BOTH) - { - assert_param(IS_OB_PCROP(SectorBank2)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); - } - } - - } - - return status; - -} - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -/** - * @brief Mass erase of FLASH memory - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * - * @retval None - */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_VOLTAGERANGE(VoltageRange)); - assert_param(IS_FLASH_BANK(Banks)); - - /* If the previous operation is completed, proceed to erase all sectors */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_CR_MER; - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); -} - -/** - * @brief Erase the specified FLASH memory sector - * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval None - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0U; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if (VoltageRange == FLASH_VOLTAGE_RANGE_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - - /* If the previous operation is completed, proceed to erase the sector */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= tmp_psize; - CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); - FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); - FLASH->CR |= FLASH_CR_STRT; -} - -/** - * @brief Enable the write protection of the desired bank 1 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * The value of this parameter depend on device used within the same series - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); - } - - return status; -} - -/** - * @brief Disable the write protection of the desired bank 1 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * The value of this parameter depend on device used within the same series - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; - } - - return status; -} -#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Enable the read/write protection (PCROP) of the desired sectors. - * @note This function can be used only for STM32F401xx devices. - * @param Sector specifies the sector(s) to be read/write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 - * @arg OB_PCROP_Sector_All - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_PCROP(Sector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector; - } - - return status; -} - - -/** - * @brief Disable the read/write protection (PCROP) of the desired sectors. - * @note This function can be used only for STM32F401xx devices. - * @param Sector specifies the sector(s) to be read/write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 - * @arg OB_PCROP_Sector_All - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_PCROP(Sector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~Sector); - } - - return status; - -} -#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -/** - * @brief Set the read protection level. - * @param Level specifies the read protection level. - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - * - * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_RDP_LEVEL(Level)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint8_t *)OPTCR_BYTE1_ADDRESS = Level; - } - - return status; -} - -/** - * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - * @param Iwdg Selects the IWDG mode - * This parameter can be one of the following values: - * @arg OB_IWDG_SW: Software IWDG selected - * @arg OB_IWDG_HW: Hardware IWDG selected - * @param Stop Reset event when entering STOP mode. - * This parameter can be one of the following values: - * @arg OB_STOP_NO_RST: No reset generated when entering in STOP - * @arg OB_STOP_RST: Reset generated when entering in STOP - * @param Stdby Reset event when entering Standby mode. - * This parameter can be one of the following values: - * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY - * @arg OB_STDBY_RST: Reset generated when entering in STANDBY - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby) -{ - uint8_t optiontmp = 0xFF; - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE(Iwdg)); - assert_param(IS_OB_STOP_SOURCE(Stop)); - assert_param(IS_OB_STDBY_SOURCE(Stdby)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F); - - /* Update User Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp))); - } - - return status; -} - -/** - * @brief Set the BOR Level. - * @param Level specifies the Option Bytes BOR Reset Level. - * This parameter can be one of the following values: - * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level) -{ - /* Check the parameters */ - assert_param(IS_OB_BOR_LEVEL(Level)); - - /* Set the BOR Level */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV); - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level; - - return HAL_OK; - -} - -/** - * @brief Return the FLASH User Option Byte value. - * @retval uint8_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1) - * and RST_STDBY(Bit2). - */ -static uint8_t FLASH_OB_GetUser(void) -{ - /* Return the User Option Byte */ - return ((uint8_t)(FLASH->OPTCR & 0xE0)); -} - -/** - * @brief Return the FLASH Write Protection Option Bytes value. - * @retval uint16_t FLASH Write Protection Option Bytes value - */ -static uint16_t FLASH_OB_GetWRP(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); -} - -/** - * @brief Returns the FLASH Read Protection level. - * @retval FLASH ReadOut Protection Status: - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - */ -static uint8_t FLASH_OB_GetRDP(void) -{ - uint8_t readstatus = OB_RDP_LEVEL_0; - - if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2) - { - readstatus = OB_RDP_LEVEL_2; - } - else if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_0) - { - readstatus = OB_RDP_LEVEL_0; - } - else - { - readstatus = OB_RDP_LEVEL_1; - } - - return readstatus; -} - -/** - * @brief Returns the FLASH BOR level. - * @retval uint8_t The FLASH BOR level: - * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V - */ -static uint8_t FLASH_OB_GetBOR(void) -{ - /* Return the FLASH BOR level */ - return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C); -} - -/** - * @brief Flush the instruction and data caches - * @retval None - */ -void FLASH_FlushCaches(void) -{ - /* Flush instruction cache */ - if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != RESET) - { - /* Disable instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); - /* Reset instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_RESET(); - /* Enable instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); - } - - /* Flush data cache */ - if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != RESET) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - /* Reset data cache */ - __HAL_FLASH_DATA_CACHE_RESET(); - /* Enable data cache */ - __HAL_FLASH_DATA_CACHE_ENABLE(); - } -} - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c deleted file mode 100644 index 952595b..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c +++ /dev/null @@ -1,172 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ramfunc.c - * @author MCD Application Team - * @brief FLASH RAMFUNC module driver. - * This file provides a FLASH firmware functions which should be - * executed from internal SRAM - * + Stop/Start the flash interface while System Run - * + Enable/Disable the flash sleep while System Run - @verbatim - ============================================================================== - ##### APIs executed from Internal RAM ##### - ============================================================================== - [..] - *** ARM Compiler *** - -------------------- - [..] RAM functions are defined using the toolchain options. - Functions that are be executed in RAM should reside in a separate - source module. Using the 'Options for File' dialog you can simply change - the 'Code / Const' area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the - Options for Target' dialog. - - *** ICCARM Compiler *** - ----------------------- - [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". - - *** GNU Compiler *** - -------------------- - [..] RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH_RAMFUNC FLASH RAMFUNC - * @brief FLASH functions executed from RAM - * @{ - */ -#ifdef HAL_FLASH_MODULE_ENABLED -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions - * @{ - */ - -/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM - * @brief Peripheral Extended features functions - * -@verbatim - - =============================================================================== - ##### ramfunc functions ##### - =============================================================================== - [..] - This subsection provides a set of functions that should be executed from RAM - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Stop the flash interface while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Stop the flash interface while System Run */ - SET_BIT(PWR->CR, PWR_CR_FISSR); - - return HAL_OK; -} - -/** - * @brief Start the flash interface while System Run - * @note This mode is only available for STM32F411xx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Start the flash interface while System Run */ - CLEAR_BIT(PWR->CR, PWR_CR_FISSR); - - return HAL_OK; -} - -/** - * @brief Enable the flash sleep while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode could n't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Enable the flash sleep while System Run */ - SET_BIT(PWR->CR, PWR_CR_FMSSR); - - return HAL_OK; -} - -/** - * @brief Disable the flash sleep while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Disable the flash sleep while System Run */ - CLEAR_BIT(PWR->CR, PWR_CR_FMSSR); - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -#endif /* HAL_FLASH_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c deleted file mode 100644 index b3ce9bb..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c +++ /dev/null @@ -1,533 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio.c - * @author MCD Application Team - * @brief GPIO HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the General Purpose Input/Output (GPIO) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### GPIO Peripheral features ##### - ============================================================================== - [..] - Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each - port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software - in several modes: - (+) Input mode - (+) Analog mode - (+) Output mode - (+) Alternate function mode - (+) External interrupt/event lines - - [..] - During and just after reset, the alternate functions and external interrupt - lines are not active and the I/O ports are configured in input floating mode. - - [..] - All GPIO pins have weak internal pull-up and pull-down resistors, which can be - activated or not. - - [..] - In Output or Alternate mode, each IO can be configured on open-drain or push-pull - type and the IO speed can be selected depending on the VDD value. - - [..] - All ports have external interrupt/event capability. To use external interrupt - lines, the port must be configured in input mode. All available GPIO pins are - connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. - - [..] - The external interrupt/event controller consists of up to 23 edge detectors - (16 lines are connected to GPIO) for generating event/interrupt requests (each - input line can be independently configured to select the type (interrupt or event) - and the corresponding trigger event (rising or falling or both). Each line can - also be masked independently. - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). - - (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). - (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure - (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef - structure. - (++) In case of Output or alternate function mode selection: the speed is - configured through "Speed" member from GPIO_InitTypeDef structure. - (++) In alternate mode is selection, the alternate function connected to the IO - is configured through "Alternate" member from GPIO_InitTypeDef structure. - (++) Analog mode is required when a pin is to be used as ADC channel - or DAC output. - (++) In case of external interrupt/event selection the "Mode" member from - GPIO_InitTypeDef structure select the type (interrupt or event) and - the corresponding trigger event (rising or falling or both). - - (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority - mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using - HAL_NVIC_EnableIRQ(). - - (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). - - (#) To set/reset the level of a pin configured in output mode use - HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). - - (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). - - - (#) During and just after reset, the alternate functions are not - active and the GPIO pins are configured in input floating mode (except JTAG - pins). - - (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose - (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has - priority over the GPIO function. - - (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as - general purpose PH0 and PH1, respectively, when the HSE oscillator is off. - The HSE has priority over the GPIO function. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIO GPIO - * @brief GPIO HAL module driver - * @{ - */ - -#ifdef HAL_GPIO_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ - -#define GPIO_NUMBER 16U -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize and de-initialize the GPIOs - to be ready for use. - -@endverbatim - * @{ - */ - - -/** - * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains - * the configuration information for the specified GPIO peripheral. - * @retval None - */ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) -{ - uint32_t position; - uint32_t ioposition = 0x00U; - uint32_t iocurrent = 0x00U; - uint32_t temp = 0x00U; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); - assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); - - /* Configure the port pins */ - for(position = 0U; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = 0x01U << position; - /* Get the current IO position */ - iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; - - if(iocurrent == ioposition) - { - /*--------------------- GPIO Mode Configuration ------------------------*/ - /* In case of Output or Alternate function mode selection */ - if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || \ - (GPIO_Init->Mode & GPIO_MODE) == MODE_AF) - { - /* Check the Speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - /* Configure the IO Speed */ - temp = GPIOx->OSPEEDR; - temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U)); - temp |= (GPIO_Init->Speed << (position * 2U)); - GPIOx->OSPEEDR = temp; - - /* Configure the IO Output Type */ - temp = GPIOx->OTYPER; - temp &= ~(GPIO_OTYPER_OT_0 << position) ; - temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); - GPIOx->OTYPER = temp; - } - - if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) - { - /* Check the parameters */ - assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); - - /* Activate the Pull-up or Pull down resistor for the current IO */ - temp = GPIOx->PUPDR; - temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); - temp |= ((GPIO_Init->Pull) << (position * 2U)); - GPIOx->PUPDR = temp; - } - - /* In case of Alternate function mode selection */ - if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) - { - /* Check the Alternate function parameter */ - assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); - /* Configure Alternate function mapped with the current IO */ - temp = GPIOx->AFR[position >> 3U]; - temp &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ; - temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & 0x07U) * 4U)); - GPIOx->AFR[position >> 3U] = temp; - } - - /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ - temp = GPIOx->MODER; - temp &= ~(GPIO_MODER_MODER0 << (position * 2U)); - temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U)); - GPIOx->MODER = temp; - - /*--------------------- EXTI Mode Configuration ------------------------*/ - /* Configure the External Interrupt or event for the current IO */ - if((GPIO_Init->Mode & EXTI_MODE) != 0x00U) - { - /* Enable SYSCFG Clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - temp = SYSCFG->EXTICR[position >> 2U]; - temp &= ~(0x0FU << (4U * (position & 0x03U))); - temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U))); - SYSCFG->EXTICR[position >> 2U] = temp; - - /* Clear Rising Falling edge configuration */ - temp = EXTI->RTSR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U) - { - temp |= iocurrent; - } - EXTI->RTSR = temp; - - temp = EXTI->FTSR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U) - { - temp |= iocurrent; - } - EXTI->FTSR = temp; - - temp = EXTI->EMR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & EXTI_EVT) != 0x00U) - { - temp |= iocurrent; - } - EXTI->EMR = temp; - - /* Clear EXTI line configuration */ - temp = EXTI->IMR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & EXTI_IT) != 0x00U) - { - temp |= iocurrent; - } - EXTI->IMR = temp; - } - } - } -} - -/** - * @brief De-initializes the GPIOx peripheral registers to their default reset values. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) -{ - uint32_t position; - uint32_t ioposition = 0x00U; - uint32_t iocurrent = 0x00U; - uint32_t tmp = 0x00U; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - - /* Configure the port pins */ - for(position = 0U; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = 0x01U << position; - /* Get the current IO position */ - iocurrent = (GPIO_Pin) & ioposition; - - if(iocurrent == ioposition) - { - /*------------------------- EXTI Mode Configuration --------------------*/ - tmp = SYSCFG->EXTICR[position >> 2U]; - tmp &= (0x0FU << (4U * (position & 0x03U))); - if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)))) - { - /* Clear EXTI line configuration */ - EXTI->IMR &= ~((uint32_t)iocurrent); - EXTI->EMR &= ~((uint32_t)iocurrent); - - /* Clear Rising Falling edge configuration */ - EXTI->FTSR &= ~((uint32_t)iocurrent); - EXTI->RTSR &= ~((uint32_t)iocurrent); - - /* Configure the External Interrupt or event for the current IO */ - tmp = 0x0FU << (4U * (position & 0x03U)); - SYSCFG->EXTICR[position >> 2U] &= ~tmp; - } - - /*------------------------- GPIO Mode Configuration --------------------*/ - /* Configure IO Direction in Input Floating Mode */ - GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U)); - - /* Configure the default Alternate Function in current IO */ - GPIOx->AFR[position >> 3U] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ; - - /* Deactivate the Pull-up and Pull-down resistor for the current IO */ - GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); - - /* Configure the default value IO Output Type */ - GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ; - - /* Configure the default value for IO Speed */ - GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U)); - } - } -} - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions - * @brief GPIO Read and Write - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Reads the specified input port pin. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to read. - * This parameter can be GPIO_PIN_x where x can be (0..15). - * @retval The input port pin value. - */ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - GPIO_PinState bitstatus; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) - { - bitstatus = GPIO_PIN_SET; - } - else - { - bitstatus = GPIO_PIN_RESET; - } - return bitstatus; -} - -/** - * @brief Sets or clears the selected data port bit. - * - * @note This function uses GPIOx_BSRR register to allow atomic read/modify - * accesses. In this way, there is no risk of an IRQ occurring between - * the read and the modify access. - * - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @param PinState specifies the value to be written to the selected bit. - * This parameter can be one of the GPIO_PinState enum values: - * @arg GPIO_PIN_RESET: to clear the port pin - * @arg GPIO_PIN_SET: to set the port pin - * @retval None - */ -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) -{ - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_PIN_ACTION(PinState)); - - if(PinState != GPIO_PIN_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U; - } -} - -/** - * @brief Toggles the specified GPIO pins. - * @param GPIOx Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin Specifies the pins to be toggled. - * @retval None - */ -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint32_t odr; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* get current Output Data Register value */ - odr = GPIOx->ODR; - - /* Set selected pins that were at low level, and reset ones that were high */ - GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); -} - -/** - * @brief Locks GPIO Pins configuration registers. - * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, - * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. - * @note The configuration of the locked GPIO pins can no longer be modified - * until the next reset. - * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F4 family - * @param GPIO_Pin specifies the port bit to be locked. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - __IO uint32_t tmp = GPIO_LCKR_LCKK; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* Apply lock key write sequence */ - tmp |= GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Read LCKR register. This read is mandatory to complete key lock sequence */ - tmp = GPIOx->LCKR; - - /* Read again in order to confirm lock is active */ - if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET) - { - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief This function handles EXTI interrupt request. - * @param GPIO_Pin Specifies the pins connected EXTI line - * @retval None - */ -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) -{ - /* EXTI line interrupt detected */ - if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET) - { - __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); - HAL_GPIO_EXTI_Callback(GPIO_Pin); - } -} - -/** - * @brief EXTI line detection callbacks. - * @param GPIO_Pin Specifies the pins connected EXTI line - * @retval None - */ -__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(GPIO_Pin); - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_GPIO_EXTI_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - - -/** - * @} - */ - -#endif /* HAL_GPIO_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c deleted file mode 100644 index c7c5b70..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c +++ /dev/null @@ -1,1728 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hcd.c - * @author MCD Application Team - * @brief HCD HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#)Declare a HCD_HandleTypeDef handle structure, for example: - HCD_HandleTypeDef hhcd; - - (#)Fill parameters of Init structure in HCD handle - - (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...) - - (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API: - (##) Enable the HCD/USB Low Level interface clock using the following macros - (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) - (+++) __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); (For High Speed Mode) - - (##) Initialize the related GPIO clocks - (##) Configure HCD pin-out - (##) Configure HCD NVIC interrupt - - (#)Associate the Upper USB Host stack to the HAL HCD Driver: - (##) hhcd.pData = phost; - - (#)Enable HCD transmission and reception: - (##) HAL_HCD_Start(); - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#ifdef HAL_HCD_MODULE_ENABLED -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) - -/** @defgroup HCD HCD - * @brief HCD HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup HCD_Private_Functions HCD Private Functions - * @{ - */ -static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum); -static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum); -static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd); -static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup HCD_Exported_Functions HCD Exported Functions - * @{ - */ - -/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the host driver. - * @param hhcd HCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd) -{ - USB_OTG_GlobalTypeDef *USBx; - - /* Check the HCD handle allocation */ - if (hhcd == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance)); - - USBx = hhcd->Instance; - - if (hhcd->State == HAL_HCD_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hhcd->Lock = HAL_UNLOCKED; - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->SOFCallback = HAL_HCD_SOF_Callback; - hhcd->ConnectCallback = HAL_HCD_Connect_Callback; - hhcd->DisconnectCallback = HAL_HCD_Disconnect_Callback; - hhcd->PortEnabledCallback = HAL_HCD_PortEnabled_Callback; - hhcd->PortDisabledCallback = HAL_HCD_PortDisabled_Callback; - hhcd->HC_NotifyURBChangeCallback = HAL_HCD_HC_NotifyURBChange_Callback; - - if (hhcd->MspInitCallback == NULL) - { - hhcd->MspInitCallback = HAL_HCD_MspInit; - } - - /* Init the low level hardware */ - hhcd->MspInitCallback(hhcd); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - HAL_HCD_MspInit(hhcd); -#endif /* (USE_HAL_HCD_REGISTER_CALLBACKS) */ - } - - hhcd->State = HAL_HCD_STATE_BUSY; - - /* Disable DMA mode for FS instance */ - if ((USBx->CID & (0x1U << 8)) == 0U) - { - hhcd->Init.dma_enable = 0U; - } - - /* Disable the Interrupts */ - __HAL_HCD_DISABLE(hhcd); - - /* Init the Core (common init.) */ - (void)USB_CoreInit(hhcd->Instance, hhcd->Init); - - /* Force Host Mode*/ - (void)USB_SetCurrentMode(hhcd->Instance, USB_HOST_MODE); - - /* Init Host */ - (void)USB_HostInit(hhcd->Instance, hhcd->Init); - - hhcd->State = HAL_HCD_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Initialize a host channel. - * @param hhcd HCD handle - * @param ch_num Channel number. - * This parameter can be a value from 1 to 15 - * @param epnum Endpoint number. - * This parameter can be a value from 1 to 15 - * @param dev_address Current device address - * This parameter can be a value from 0 to 255 - * @param speed Current device speed. - * This parameter can be one of these values: - * HCD_DEVICE_SPEED_HIGH: High speed mode, - * HCD_DEVICE_SPEED_FULL: Full speed mode, - * HCD_DEVICE_SPEED_LOW: Low speed mode - * @param ep_type Endpoint Type. - * This parameter can be one of these values: - * EP_TYPE_CTRL: Control type, - * EP_TYPE_ISOC: Isochronous type, - * EP_TYPE_BULK: Bulk type, - * EP_TYPE_INTR: Interrupt type - * @param mps Max Packet Size. - * This parameter can be a value from 0 to32K - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, - uint8_t ch_num, - uint8_t epnum, - uint8_t dev_address, - uint8_t speed, - uint8_t ep_type, - uint16_t mps) -{ - HAL_StatusTypeDef status; - - __HAL_LOCK(hhcd); - hhcd->hc[ch_num].do_ping = 0U; - hhcd->hc[ch_num].dev_addr = dev_address; - hhcd->hc[ch_num].max_packet = mps; - hhcd->hc[ch_num].ch_num = ch_num; - hhcd->hc[ch_num].ep_type = ep_type; - hhcd->hc[ch_num].ep_num = epnum & 0x7FU; - - if ((epnum & 0x80U) == 0x80U) - { - hhcd->hc[ch_num].ep_is_in = 1U; - } - else - { - hhcd->hc[ch_num].ep_is_in = 0U; - } - - hhcd->hc[ch_num].speed = speed; - - status = USB_HC_Init(hhcd->Instance, - ch_num, - epnum, - dev_address, - speed, - ep_type, - mps); - __HAL_UNLOCK(hhcd); - - return status; -} - -/** - * @brief Halt a host channel. - * @param hhcd HCD handle - * @param ch_num Channel number. - * This parameter can be a value from 1 to 15 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num) -{ - HAL_StatusTypeDef status = HAL_OK; - - __HAL_LOCK(hhcd); - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - __HAL_UNLOCK(hhcd); - - return status; -} - -/** - * @brief DeInitialize the host driver. - * @param hhcd HCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd) -{ - /* Check the HCD handle allocation */ - if (hhcd == NULL) - { - return HAL_ERROR; - } - - hhcd->State = HAL_HCD_STATE_BUSY; - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - if (hhcd->MspDeInitCallback == NULL) - { - hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware */ - hhcd->MspDeInitCallback(hhcd); -#else - /* DeInit the low level hardware: CLOCK, NVIC.*/ - HAL_HCD_MspDeInit(hhcd); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - - __HAL_HCD_DISABLE(hhcd); - - hhcd->State = HAL_HCD_STATE_RESET; - - return HAL_OK; -} - -/** - * @brief Initialize the HCD MSP. - * @param hhcd HCD handle - * @retval None - */ -__weak void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_HCD_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the HCD MSP. - * @param hhcd HCD handle - * @retval None - */ -__weak void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_HCD_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions - * @brief HCD IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to manage the USB Host Data - Transfer - -@endverbatim - * @{ - */ - -/** - * @brief Submit a new URB for processing. - * @param hhcd HCD handle - * @param ch_num Channel number. - * This parameter can be a value from 1 to 15 - * @param direction Channel number. - * This parameter can be one of these values: - * 0 : Output / 1 : Input - * @param ep_type Endpoint Type. - * This parameter can be one of these values: - * EP_TYPE_CTRL: Control type/ - * EP_TYPE_ISOC: Isochronous type/ - * EP_TYPE_BULK: Bulk type/ - * EP_TYPE_INTR: Interrupt type/ - * @param token Endpoint Type. - * This parameter can be one of these values: - * 0: HC_PID_SETUP / 1: HC_PID_DATA1 - * @param pbuff pointer to URB data - * @param length Length of URB data - * @param do_ping activate do ping protocol (for high speed only). - * This parameter can be one of these values: - * 0 : do ping inactive / 1 : do ping active - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, - uint8_t ch_num, - uint8_t direction, - uint8_t ep_type, - uint8_t token, - uint8_t *pbuff, - uint16_t length, - uint8_t do_ping) -{ - hhcd->hc[ch_num].ep_is_in = direction; - hhcd->hc[ch_num].ep_type = ep_type; - - if (token == 0U) - { - hhcd->hc[ch_num].data_pid = HC_PID_SETUP; - hhcd->hc[ch_num].do_ping = do_ping; - } - else - { - hhcd->hc[ch_num].data_pid = HC_PID_DATA1; - } - - /* Manage Data Toggle */ - switch (ep_type) - { - case EP_TYPE_CTRL: - if ((token == 1U) && (direction == 0U)) /*send data */ - { - if (length == 0U) - { - /* For Status OUT stage, Length==0, Status Out PID = 1 */ - hhcd->hc[ch_num].toggle_out = 1U; - } - - /* Set the Data Toggle bit as per the Flag */ - if (hhcd->hc[ch_num].toggle_out == 0U) - { - /* Put the PID 0 */ - hhcd->hc[ch_num].data_pid = HC_PID_DATA0; - } - else - { - /* Put the PID 1 */ - hhcd->hc[ch_num].data_pid = HC_PID_DATA1; - } - } - break; - - case EP_TYPE_BULK: - if (direction == 0U) - { - /* Set the Data Toggle bit as per the Flag */ - if (hhcd->hc[ch_num].toggle_out == 0U) - { - /* Put the PID 0 */ - hhcd->hc[ch_num].data_pid = HC_PID_DATA0; - } - else - { - /* Put the PID 1 */ - hhcd->hc[ch_num].data_pid = HC_PID_DATA1; - } - } - else - { - if (hhcd->hc[ch_num].toggle_in == 0U) - { - hhcd->hc[ch_num].data_pid = HC_PID_DATA0; - } - else - { - hhcd->hc[ch_num].data_pid = HC_PID_DATA1; - } - } - - break; - case EP_TYPE_INTR: - if (direction == 0U) - { - /* Set the Data Toggle bit as per the Flag */ - if (hhcd->hc[ch_num].toggle_out == 0U) - { - /* Put the PID 0 */ - hhcd->hc[ch_num].data_pid = HC_PID_DATA0; - } - else - { - /* Put the PID 1 */ - hhcd->hc[ch_num].data_pid = HC_PID_DATA1; - } - } - else - { - if (hhcd->hc[ch_num].toggle_in == 0U) - { - hhcd->hc[ch_num].data_pid = HC_PID_DATA0; - } - else - { - hhcd->hc[ch_num].data_pid = HC_PID_DATA1; - } - } - break; - - case EP_TYPE_ISOC: - hhcd->hc[ch_num].data_pid = HC_PID_DATA0; - break; - - default: - break; - } - - hhcd->hc[ch_num].xfer_buff = pbuff; - hhcd->hc[ch_num].xfer_len = length; - hhcd->hc[ch_num].urb_state = URB_IDLE; - hhcd->hc[ch_num].xfer_count = 0U; - hhcd->hc[ch_num].ch_num = ch_num; - hhcd->hc[ch_num].state = HC_IDLE; - - return USB_HC_StartXfer(hhcd->Instance, &hhcd->hc[ch_num], (uint8_t)hhcd->Init.dma_enable); -} - -/** - * @brief Handle HCD interrupt request. - * @param hhcd HCD handle - * @retval None - */ -void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd) -{ - USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t i; - uint32_t interrupt; - - /* Ensure that we are in device mode */ - if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST) - { - /* Avoid spurious interrupt */ - if (__HAL_HCD_IS_INVALID_INTERRUPT(hhcd)) - { - return; - } - - if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) - { - /* Incorrect mode, acknowledge the interrupt */ - __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); - } - - if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR)) - { - /* Incorrect mode, acknowledge the interrupt */ - __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR); - } - - if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE)) - { - /* Incorrect mode, acknowledge the interrupt */ - __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE); - } - - if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS)) - { - /* Incorrect mode, acknowledge the interrupt */ - __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS); - } - - /* Handle Host Disconnect Interrupts */ - if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT)) - { - __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT); - - if ((USBx_HPRT0 & USB_OTG_HPRT_PCSTS) == 0U) - { - /* Flush USB Fifo */ - (void)USB_FlushTxFifo(USBx, 0x10U); - (void)USB_FlushRxFifo(USBx); - - /* Restore FS Clock */ - (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ); - - /* Handle Host Port Disconnect Interrupt */ -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->DisconnectCallback(hhcd); -#else - HAL_HCD_Disconnect_Callback(hhcd); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - } - } - - /* Handle Host Port Interrupts */ - if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT)) - { - HCD_Port_IRQHandler(hhcd); - } - - /* Handle Host SOF Interrupt */ - if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF)) - { -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->SOFCallback(hhcd); -#else - HAL_HCD_SOF_Callback(hhcd); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - - __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF); - } - - /* Handle Rx Queue Level Interrupts */ - if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U) - { - USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL); - - HCD_RXQLVL_IRQHandler(hhcd); - - USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL); - } - - /* Handle Host channel Interrupt */ - if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT)) - { - interrupt = USB_HC_ReadInterrupt(hhcd->Instance); - for (i = 0U; i < hhcd->Init.Host_channels; i++) - { - if ((interrupt & (1UL << (i & 0xFU))) != 0U) - { - if ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_EPDIR) == USB_OTG_HCCHAR_EPDIR) - { - HCD_HC_IN_IRQHandler(hhcd, (uint8_t)i); - } - else - { - HCD_HC_OUT_IRQHandler(hhcd, (uint8_t)i); - } - } - } - __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT); - } - } -} - - -/** - * @brief Handles HCD Wakeup interrupt request. - * @param hhcd HCD handle - * @retval HAL status - */ -void HAL_HCD_WKUP_IRQHandler(HCD_HandleTypeDef *hhcd) -{ - UNUSED(hhcd); -} - - -/** - * @brief SOF callback. - * @param hhcd HCD handle - * @retval None - */ -__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_HCD_SOF_Callback could be implemented in the user file - */ -} - -/** - * @brief Connection Event callback. - * @param hhcd HCD handle - * @retval None - */ -__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_HCD_Connect_Callback could be implemented in the user file - */ -} - -/** - * @brief Disconnection Event callback. - * @param hhcd HCD handle - * @retval None - */ -__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_HCD_Disconnect_Callback could be implemented in the user file - */ -} - -/** - * @brief Port Enabled Event callback. - * @param hhcd HCD handle - * @retval None - */ -__weak void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_HCD_Disconnect_Callback could be implemented in the user file - */ -} - -/** - * @brief Port Disabled Event callback. - * @param hhcd HCD handle - * @retval None - */ -__weak void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_HCD_Disconnect_Callback could be implemented in the user file - */ -} - -/** - * @brief Notify URB state change callback. - * @param hhcd HCD handle - * @param chnum Channel number. - * This parameter can be a value from 1 to 15 - * @param urb_state: - * This parameter can be one of these values: - * URB_IDLE/ - * URB_DONE/ - * URB_NOTREADY/ - * URB_NYET/ - * URB_ERROR/ - * URB_STALL/ - * @retval None - */ -__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hhcd); - UNUSED(chnum); - UNUSED(urb_state); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file - */ -} - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) -/** - * @brief Register a User USB HCD Callback - * To be used instead of the weak predefined callback - * @param hhcd USB HCD handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_HCD_SOF_CB_ID USB HCD SOF callback ID - * @arg @ref HAL_HCD_CONNECT_CB_ID USB HCD Connect callback ID - * @arg @ref HAL_HCD_DISCONNECT_CB_ID OTG HCD Disconnect callback ID - * @arg @ref HAL_HCD_PORT_ENABLED_CB_ID USB HCD Port Enable callback ID - * @arg @ref HAL_HCD_PORT_DISABLED_CB_ID USB HCD Port Disable callback ID - * @arg @ref HAL_HCD_MSPINIT_CB_ID MspDeInit callback ID - * @arg @ref HAL_HCD_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, - HAL_HCD_CallbackIDTypeDef CallbackID, - pHCD_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hhcd); - - if (hhcd->State == HAL_HCD_STATE_READY) - { - switch (CallbackID) - { - case HAL_HCD_SOF_CB_ID : - hhcd->SOFCallback = pCallback; - break; - - case HAL_HCD_CONNECT_CB_ID : - hhcd->ConnectCallback = pCallback; - break; - - case HAL_HCD_DISCONNECT_CB_ID : - hhcd->DisconnectCallback = pCallback; - break; - - case HAL_HCD_PORT_ENABLED_CB_ID : - hhcd->PortEnabledCallback = pCallback; - break; - - case HAL_HCD_PORT_DISABLED_CB_ID : - hhcd->PortDisabledCallback = pCallback; - break; - - case HAL_HCD_MSPINIT_CB_ID : - hhcd->MspInitCallback = pCallback; - break; - - case HAL_HCD_MSPDEINIT_CB_ID : - hhcd->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hhcd->State == HAL_HCD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_HCD_MSPINIT_CB_ID : - hhcd->MspInitCallback = pCallback; - break; - - case HAL_HCD_MSPDEINIT_CB_ID : - hhcd->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hhcd); - return status; -} - -/** - * @brief Unregister an USB HCD Callback - * USB HCD callback is redirected to the weak predefined callback - * @param hhcd USB HCD handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_HCD_SOF_CB_ID USB HCD SOF callback ID - * @arg @ref HAL_HCD_CONNECT_CB_ID USB HCD Connect callback ID - * @arg @ref HAL_HCD_DISCONNECT_CB_ID OTG HCD Disconnect callback ID - * @arg @ref HAL_HCD_PORT_ENABLED_CB_ID USB HCD Port Enabled callback ID - * @arg @ref HAL_HCD_PORT_DISABLED_CB_ID USB HCD Port Disabled callback ID - * @arg @ref HAL_HCD_MSPINIT_CB_ID MspDeInit callback ID - * @arg @ref HAL_HCD_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, HAL_HCD_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hhcd); - - /* Setup Legacy weak Callbacks */ - if (hhcd->State == HAL_HCD_STATE_READY) - { - switch (CallbackID) - { - case HAL_HCD_SOF_CB_ID : - hhcd->SOFCallback = HAL_HCD_SOF_Callback; - break; - - case HAL_HCD_CONNECT_CB_ID : - hhcd->ConnectCallback = HAL_HCD_Connect_Callback; - break; - - case HAL_HCD_DISCONNECT_CB_ID : - hhcd->DisconnectCallback = HAL_HCD_Disconnect_Callback; - break; - - case HAL_HCD_PORT_ENABLED_CB_ID : - hhcd->PortEnabledCallback = HAL_HCD_PortEnabled_Callback; - break; - - case HAL_HCD_PORT_DISABLED_CB_ID : - hhcd->PortDisabledCallback = HAL_HCD_PortDisabled_Callback; - break; - - case HAL_HCD_MSPINIT_CB_ID : - hhcd->MspInitCallback = HAL_HCD_MspInit; - break; - - case HAL_HCD_MSPDEINIT_CB_ID : - hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; - break; - - default : - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hhcd->State == HAL_HCD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_HCD_MSPINIT_CB_ID : - hhcd->MspInitCallback = HAL_HCD_MspInit; - break; - - case HAL_HCD_MSPDEINIT_CB_ID : - hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; - break; - - default : - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hhcd); - return status; -} - -/** - * @brief Register USB HCD Host Channel Notify URB Change Callback - * To be used instead of the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback - * @param hhcd HCD handle - * @param pCallback pointer to the USB HCD Host Channel Notify URB Change Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, - pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hhcd); - - if (hhcd->State == HAL_HCD_STATE_READY) - { - hhcd->HC_NotifyURBChangeCallback = pCallback; - } - else - { - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hhcd); - - return status; -} - -/** - * @brief Unregister the USB HCD Host Channel Notify URB Change Callback - * USB HCD Host Channel Notify URB Change Callback is redirected - * to the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback - * @param hhcd HCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hhcd); - - if (hhcd->State == HAL_HCD_STATE_READY) - { - hhcd->HC_NotifyURBChangeCallback = HAL_HCD_HC_NotifyURBChange_Callback; /* Legacy weak DataOutStageCallback */ - } - else - { - /* Update the error code */ - hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hhcd); - - return status; -} -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions - * @brief Management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the HCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Start the host driver. - * @param hhcd HCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd) -{ - __HAL_LOCK(hhcd); - /* Enable port power */ - (void)USB_DriveVbus(hhcd->Instance, 1U); - - /* Enable global interrupt */ - __HAL_HCD_ENABLE(hhcd); - __HAL_UNLOCK(hhcd); - - return HAL_OK; -} - -/** - * @brief Stop the host driver. - * @param hhcd HCD handle - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd) -{ - __HAL_LOCK(hhcd); - (void)USB_StopHost(hhcd->Instance); - __HAL_UNLOCK(hhcd); - - return HAL_OK; -} - -/** - * @brief Reset the host port. - * @param hhcd HCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd) -{ - return (USB_ResetPort(hhcd->Instance)); -} - -/** - * @} - */ - -/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the HCD handle state. - * @param hhcd HCD handle - * @retval HAL state - */ -HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd) -{ - return hhcd->State; -} - -/** - * @brief Return URB state for a channel. - * @param hhcd HCD handle - * @param chnum Channel number. - * This parameter can be a value from 1 to 15 - * @retval URB state. - * This parameter can be one of these values: - * URB_IDLE/ - * URB_DONE/ - * URB_NOTREADY/ - * URB_NYET/ - * URB_ERROR/ - * URB_STALL - */ -HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum) -{ - return hhcd->hc[chnum].urb_state; -} - - -/** - * @brief Return the last host transfer size. - * @param hhcd HCD handle - * @param chnum Channel number. - * This parameter can be a value from 1 to 15 - * @retval last transfer size in byte - */ -uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum) -{ - return hhcd->hc[chnum].xfer_count; -} - -/** - * @brief Return the Host Channel state. - * @param hhcd HCD handle - * @param chnum Channel number. - * This parameter can be a value from 1 to 15 - * @retval Host channel state - * This parameter can be one of these values: - * HC_IDLE/ - * HC_XFRC/ - * HC_HALTED/ - * HC_NYET/ - * HC_NAK/ - * HC_STALL/ - * HC_XACTERR/ - * HC_BBLERR/ - * HC_DATATGLERR - */ -HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum) -{ - return hhcd->hc[chnum].state; -} - -/** - * @brief Return the current Host frame number. - * @param hhcd HCD handle - * @retval Current Host frame number - */ -uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd) -{ - return (USB_GetCurrentFrame(hhcd->Instance)); -} - -/** - * @brief Return the Host enumeration speed. - * @param hhcd HCD handle - * @retval Enumeration speed - */ -uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd) -{ - return (USB_GetHostSpeed(hhcd->Instance)); -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup HCD_Private_Functions - * @{ - */ -/** - * @brief Handle Host Channel IN interrupt requests. - * @param hhcd HCD handle - * @param chnum Channel number. - * This parameter can be a value from 1 to 15 - * @retval none - */ -static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) -{ - USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t ch_num = (uint32_t)chnum; - - uint32_t tmpreg; - - if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_AHBERR) == USB_OTG_HCINT_AHBERR) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_AHBERR); - hhcd->hc[ch_num].state = HC_XACTERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_BBERR) == USB_OTG_HCINT_BBERR) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_BBERR); - hhcd->hc[ch_num].state = HC_BBLERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_ACK) == USB_OTG_HCINT_ACK) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_ACK); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_STALL) == USB_OTG_HCINT_STALL) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL); - hhcd->hc[ch_num].state = HC_STALL; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR); - hhcd->hc[ch_num].state = HC_DATATGLERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR); - hhcd->hc[ch_num].state = HC_XACTERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else - { - /* ... */ - } - - if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_FRMOR) == USB_OTG_HCINT_FRMOR) - { - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_FRMOR); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_XFRC) == USB_OTG_HCINT_XFRC) - { - if (hhcd->Init.dma_enable != 0U) - { - hhcd->hc[ch_num].xfer_count = hhcd->hc[ch_num].XferSize - \ - (USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ); - } - - hhcd->hc[ch_num].state = HC_XFRC; - hhcd->hc[ch_num].ErrCnt = 0U; - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_XFRC); - - if ((hhcd->hc[ch_num].ep_type == EP_TYPE_CTRL) || - (hhcd->hc[ch_num].ep_type == EP_TYPE_BULK)) - { - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK); - } - else if ((hhcd->hc[ch_num].ep_type == EP_TYPE_INTR) || - (hhcd->hc[ch_num].ep_type == EP_TYPE_ISOC)) - { - USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; - hhcd->hc[ch_num].urb_state = URB_DONE; - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#else - HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - } - else - { - /* ... */ - } - - if (hhcd->Init.dma_enable == 1U) - { - if (((hhcd->hc[ch_num].XferSize / hhcd->hc[ch_num].max_packet) & 1U) != 0U) - { - hhcd->hc[ch_num].toggle_in ^= 1U; - } - } - else - { - hhcd->hc[ch_num].toggle_in ^= 1U; - } - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_CHH) == USB_OTG_HCINT_CHH) - { - if (hhcd->hc[ch_num].state == HC_XFRC) - { - hhcd->hc[ch_num].urb_state = URB_DONE; - } - else if (hhcd->hc[ch_num].state == HC_STALL) - { - hhcd->hc[ch_num].urb_state = URB_STALL; - } - else if ((hhcd->hc[ch_num].state == HC_XACTERR) || - (hhcd->hc[ch_num].state == HC_DATATGLERR)) - { - hhcd->hc[ch_num].ErrCnt++; - if (hhcd->hc[ch_num].ErrCnt > 2U) - { - hhcd->hc[ch_num].ErrCnt = 0U; - hhcd->hc[ch_num].urb_state = URB_ERROR; - } - else - { - hhcd->hc[ch_num].urb_state = URB_NOTREADY; - - /* re-activate the channel */ - tmpreg = USBx_HC(ch_num)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(ch_num)->HCCHAR = tmpreg; - } - } - else if (hhcd->hc[ch_num].state == HC_NAK) - { - hhcd->hc[ch_num].urb_state = URB_NOTREADY; - - /* re-activate the channel */ - tmpreg = USBx_HC(ch_num)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(ch_num)->HCCHAR = tmpreg; - } - else if (hhcd->hc[ch_num].state == HC_BBLERR) - { - hhcd->hc[ch_num].ErrCnt++; - hhcd->hc[ch_num].urb_state = URB_ERROR; - } - else - { - /* ... */ - } - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_CHH); - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#else - HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NAK) == USB_OTG_HCINT_NAK) - { - if (hhcd->hc[ch_num].ep_type == EP_TYPE_INTR) - { - hhcd->hc[ch_num].ErrCnt = 0U; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((hhcd->hc[ch_num].ep_type == EP_TYPE_CTRL) || - (hhcd->hc[ch_num].ep_type == EP_TYPE_BULK)) - { - hhcd->hc[ch_num].ErrCnt = 0U; - - if (hhcd->Init.dma_enable == 0U) - { - hhcd->hc[ch_num].state = HC_NAK; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - } - else - { - /* ... */ - } - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK); - } - else - { - /* ... */ - } -} - -/** - * @brief Handle Host Channel OUT interrupt requests. - * @param hhcd HCD handle - * @param chnum Channel number. - * This parameter can be a value from 1 to 15 - * @retval none - */ -static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) -{ - USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t ch_num = (uint32_t)chnum; - uint32_t tmpreg; - uint32_t num_packets; - - if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_AHBERR) == USB_OTG_HCINT_AHBERR) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_AHBERR); - hhcd->hc[ch_num].state = HC_XACTERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_ACK) == USB_OTG_HCINT_ACK) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_ACK); - - if (hhcd->hc[ch_num].do_ping == 1U) - { - hhcd->hc[ch_num].do_ping = 0U; - hhcd->hc[ch_num].urb_state = URB_NOTREADY; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_FRMOR) == USB_OTG_HCINT_FRMOR) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_FRMOR); - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_XFRC) == USB_OTG_HCINT_XFRC) - { - hhcd->hc[ch_num].ErrCnt = 0U; - - /* transaction completed with NYET state, update do ping state */ - if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET) - { - hhcd->hc[ch_num].do_ping = 1U; - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET); - } - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_XFRC); - hhcd->hc[ch_num].state = HC_XFRC; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET) - { - hhcd->hc[ch_num].state = HC_NYET; - hhcd->hc[ch_num].do_ping = 1U; - hhcd->hc[ch_num].ErrCnt = 0U; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_STALL) == USB_OTG_HCINT_STALL) - { - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL); - hhcd->hc[ch_num].state = HC_STALL; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NAK) == USB_OTG_HCINT_NAK) - { - hhcd->hc[ch_num].ErrCnt = 0U; - hhcd->hc[ch_num].state = HC_NAK; - - if (hhcd->hc[ch_num].do_ping == 0U) - { - if (hhcd->hc[ch_num].speed == HCD_DEVICE_SPEED_HIGH) - { - hhcd->hc[ch_num].do_ping = 1U; - } - } - - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR) - { - if (hhcd->Init.dma_enable == 0U) - { - hhcd->hc[ch_num].state = HC_XACTERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - } - else - { - hhcd->hc[ch_num].ErrCnt++; - if (hhcd->hc[ch_num].ErrCnt > 2U) - { - hhcd->hc[ch_num].ErrCnt = 0U; - hhcd->hc[ch_num].urb_state = URB_ERROR; - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#else - HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - } - else - { - hhcd->hc[ch_num].urb_state = URB_NOTREADY; - } - } - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR) - { - hhcd->hc[ch_num].state = HC_DATATGLERR; - (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num); - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR); - } - else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_CHH) == USB_OTG_HCINT_CHH) - { - if (hhcd->hc[ch_num].state == HC_XFRC) - { - hhcd->hc[ch_num].urb_state = URB_DONE; - if ((hhcd->hc[ch_num].ep_type == EP_TYPE_BULK) || - (hhcd->hc[ch_num].ep_type == EP_TYPE_INTR)) - { - if (hhcd->Init.dma_enable == 0U) - { - hhcd->hc[ch_num].toggle_out ^= 1U; - } - - if ((hhcd->Init.dma_enable == 1U) && (hhcd->hc[ch_num].xfer_len > 0U)) - { - num_packets = (hhcd->hc[ch_num].xfer_len + hhcd->hc[ch_num].max_packet - 1U) / hhcd->hc[ch_num].max_packet; - - if ((num_packets & 1U) != 0U) - { - hhcd->hc[ch_num].toggle_out ^= 1U; - } - } - } - } - else if (hhcd->hc[ch_num].state == HC_NAK) - { - hhcd->hc[ch_num].urb_state = URB_NOTREADY; - } - else if (hhcd->hc[ch_num].state == HC_NYET) - { - hhcd->hc[ch_num].urb_state = URB_NOTREADY; - } - else if (hhcd->hc[ch_num].state == HC_STALL) - { - hhcd->hc[ch_num].urb_state = URB_STALL; - } - else if ((hhcd->hc[ch_num].state == HC_XACTERR) || - (hhcd->hc[ch_num].state == HC_DATATGLERR)) - { - hhcd->hc[ch_num].ErrCnt++; - if (hhcd->hc[ch_num].ErrCnt > 2U) - { - hhcd->hc[ch_num].ErrCnt = 0U; - hhcd->hc[ch_num].urb_state = URB_ERROR; - } - else - { - hhcd->hc[ch_num].urb_state = URB_NOTREADY; - - /* re-activate the channel */ - tmpreg = USBx_HC(ch_num)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(ch_num)->HCCHAR = tmpreg; - } - } - else - { - /* ... */ - } - - __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_CHH); - -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->HC_NotifyURBChangeCallback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#else - HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - } - else - { - /* ... */ - } -} - -/** - * @brief Handle Rx Queue Level interrupt requests. - * @param hhcd HCD handle - * @retval none - */ -static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd) -{ - USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t pktsts; - uint32_t pktcnt; - uint32_t GrxstspReg; - uint32_t xferSizePktCnt; - uint32_t tmpreg; - uint32_t ch_num; - - GrxstspReg = hhcd->Instance->GRXSTSP; - ch_num = GrxstspReg & USB_OTG_GRXSTSP_EPNUM; - pktsts = (GrxstspReg & USB_OTG_GRXSTSP_PKTSTS) >> 17; - pktcnt = (GrxstspReg & USB_OTG_GRXSTSP_BCNT) >> 4; - - switch (pktsts) - { - case GRXSTS_PKTSTS_IN: - /* Read the data into the host buffer. */ - if ((pktcnt > 0U) && (hhcd->hc[ch_num].xfer_buff != (void *)0)) - { - if ((hhcd->hc[ch_num].xfer_count + pktcnt) <= hhcd->hc[ch_num].xfer_len) - { - (void)USB_ReadPacket(hhcd->Instance, - hhcd->hc[ch_num].xfer_buff, (uint16_t)pktcnt); - - /* manage multiple Xfer */ - hhcd->hc[ch_num].xfer_buff += pktcnt; - hhcd->hc[ch_num].xfer_count += pktcnt; - - /* get transfer size packet count */ - xferSizePktCnt = (USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) >> 19; - - if ((hhcd->hc[ch_num].max_packet == pktcnt) && (xferSizePktCnt > 0U)) - { - /* re-activate the channel when more packets are expected */ - tmpreg = USBx_HC(ch_num)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(ch_num)->HCCHAR = tmpreg; - hhcd->hc[ch_num].toggle_in ^= 1U; - } - } - else - { - hhcd->hc[ch_num].urb_state = URB_ERROR; - } - } - break; - - case GRXSTS_PKTSTS_DATA_TOGGLE_ERR: - break; - - case GRXSTS_PKTSTS_IN_XFER_COMP: - case GRXSTS_PKTSTS_CH_HALTED: - default: - break; - } -} - -/** - * @brief Handle Host Port interrupt requests. - * @param hhcd HCD handle - * @retval None - */ -static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd) -{ - USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - __IO uint32_t hprt0; - __IO uint32_t hprt0_dup; - - /* Handle Host Port Interrupts */ - hprt0 = USBx_HPRT0; - hprt0_dup = USBx_HPRT0; - - hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | \ - USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); - - /* Check whether Port Connect detected */ - if ((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET) - { - if ((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS) - { -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->ConnectCallback(hhcd); -#else - HAL_HCD_Connect_Callback(hhcd); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - } - hprt0_dup |= USB_OTG_HPRT_PCDET; - } - - /* Check whether Port Enable Changed */ - if ((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG) - { - hprt0_dup |= USB_OTG_HPRT_PENCHNG; - - if ((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA) - { - if (hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY) - { - if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17)) - { - (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_6_MHZ); - } - else - { - (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ); - } - } - else - { - if (hhcd->Init.speed == HCD_SPEED_FULL) - { - USBx_HOST->HFIR = 60000U; - } - } -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->PortEnabledCallback(hhcd); -#else - HAL_HCD_PortEnabled_Callback(hhcd); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - - } - else - { -#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) - hhcd->PortDisabledCallback(hhcd); -#else - HAL_HCD_PortDisabled_Callback(hhcd); -#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ - } - } - - /* Check for an overcurrent */ - if ((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG) - { - hprt0_dup |= USB_OTG_HPRT_POCCHNG; - } - - /* Clear Port Interrupts */ - USBx_HPRT0 = hprt0_dup; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -#endif /* HAL_HCD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c deleted file mode 100644 index c2a8eb7..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c +++ /dev/null @@ -1,7524 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c.c - * @author MCD Application Team - * @brief I2C HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Inter Integrated Circuit (I2C) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State, Mode and Error functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The I2C HAL driver can be used as follows: - - (#) Declare a I2C_HandleTypeDef handle structure, for example: - I2C_HandleTypeDef hi2c; - - (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: - (##) Enable the I2Cx interface clock - (##) I2C pins configuration - (+++) Enable the clock for the I2C GPIOs - (+++) Configure I2C pins as alternate function open-drain - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the I2Cx interrupt priority - (+++) Enable the NVIC I2C IRQ Channel - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream - (+++) Enable the DMAx interface clock using - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx stream - (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on - the DMA Tx or Rx stream - - (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1, - Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure. - - (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware - (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit() API. - - (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() - - (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() - (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() - (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() - (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() - - *** Polling mode IO MEM operation *** - ===================================== - [..] - (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() - (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() - - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() - (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() - (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() - (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() - (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() - - *** Interrupt mode or DMA mode IO sequential operation *** - ========================================================== - [..] - (@) These interfaces allow to manage a sequential transfer with a repeated start condition - when a direction change during transfer - [..] - (+) A specific option field manage the different steps of a sequential transfer - (+) Option field values are defined through I2C_XferOptions_definition and are listed below: - (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode - (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address - and data to transfer without a final stop condition - (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address - and data to transfer without a final stop condition, an then permit a call the same master sequential interface - several times (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() - or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) - (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to transfer - if no direction change and without a final stop condition in both cases - (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to transfer - if no direction change and with a final stop condition in both cases - (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential - interface several times (link with option I2C_FIRST_AND_NEXT_FRAME). - Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). - Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit - without stopping the communication and so generate a restart condition. - (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential - interface. - Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). - Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. - - (+) Different sequential I2C interfaces are listed below: - (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Seq_Transmit_IT() - or using HAL_I2C_Master_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() - (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Seq_Receive_IT() - or using HAL_I2C_Master_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() - (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT() - (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can - add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). - (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_ListenCpltCallback() - (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Seq_Transmit_IT() - or using HAL_I2C_Slave_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() - (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Seq_Receive_IT() - or using HAL_I2C_Slave_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() - - *** Interrupt mode IO MEM operation *** - ======================================= - [..] - (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using - HAL_I2C_Mem_Write_IT() - (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using - HAL_I2C_Mem_Read_IT() - (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Master_Transmit_DMA() - (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Master_Receive_DMA() - (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Slave_Transmit_DMA() - (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Slave_Receive_DMA() - (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() - - *** DMA mode IO MEM operation *** - ================================= - [..] - (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using - HAL_I2C_Mem_Write_DMA() - (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using - HAL_I2C_Mem_Read_DMA() - (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback() - - - *** I2C HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in I2C HAL driver. - - (+) __HAL_I2C_ENABLE: Enable the I2C peripheral - (+) __HAL_I2C_DISABLE: Disable the I2C peripheral - (+) __HAL_I2C_GET_FLAG: Checks whether the specified I2C flag is set or not - (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag - (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt - (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt - - *** Callback registration *** - ============================================= - [..] - The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() - to register an interrupt callback. - [..] - Function HAL_I2C_RegisterCallback() allows to register following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - [..] - For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). - [..] - Use function HAL_I2C_UnRegisterCallback to reset a callback to the default - weak function. - HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - [..] - For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). - [..] - By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - [..] - Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() - or HAL_I2C_Init() function. - [..] - When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - - - [..] - (@) You can refer to the I2C HAL driver header file for more useful macros - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup I2C I2C - * @brief I2C HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup I2C_Private_Define - * @{ - */ -#define I2C_TIMEOUT_FLAG 35U /*!< Timeout 35 ms */ -#define I2C_TIMEOUT_BUSY_FLAG 25U /*!< Timeout 25 ms */ -#define I2C_TIMEOUT_STOP_FLAG 5U /*!< Timeout 5 ms */ -#define I2C_NO_OPTION_FRAME 0xFFFF0000U /*!< XferOptions default value */ - -/* Private define for @ref PreviousState usage */ -#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */ -#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ -#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ -/* Private functions to handle DMA transfer */ -static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAError(DMA_HandleTypeDef *hdma); -static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); - -static void I2C_ITError(I2C_HandleTypeDef *hi2c); - -static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); - -/* Private functions to handle flags during polling transfer */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnSTOPRequestThroughIT(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c); - -/* Private functions for I2C transfer IRQ handler */ -static void I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c); -static void I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c); -static void I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c); -static void I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c); -static void I2C_Master_SB(I2C_HandleTypeDef *hi2c); -static void I2C_Master_ADD10(I2C_HandleTypeDef *hi2c); -static void I2C_Master_ADDR(I2C_HandleTypeDef *hi2c); - -static void I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c); -static void I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c); -static void I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c); -static void I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c); -static void I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c, uint32_t IT2Flags); -static void I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c); -static void I2C_Slave_AF(I2C_HandleTypeDef *hi2c); - -static void I2C_MemoryTransmit_TXE_BTF(I2C_HandleTypeDef *hi2c); - -/* Private function to Convert Specific options */ -static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Functions I2C Exported Functions - * @{ - */ - -/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - deinitialize the I2Cx peripheral: - - (+) User must Implement HAL_I2C_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC). - - (+) Call the function HAL_I2C_Init() to configure the selected device with - the selected configuration: - (++) Communication Speed - (++) Duty cycle - (++) Addressing mode - (++) Own Address 1 - (++) Dual Addressing mode - (++) Own Address 2 - (++) General call mode - (++) Nostretch mode - - (+) Call the function HAL_I2C_DeInit() to restore the default configuration - of the selected I2Cx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the I2C according to the specified parameters - * in the I2C_InitTypeDef and initialize the associated handle. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) -{ - uint32_t freqrange; - uint32_t pclk1; - - /* Check the I2C handle allocation */ - if (hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed)); - assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle)); - assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); - assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); - assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); - assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); - assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); - assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); - - if (hi2c->State == HAL_I2C_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hi2c->Lock = HAL_UNLOCKED; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - /* Init the I2C Callback settings */ - hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ - hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ - - if (hi2c->MspInitCallback == NULL) - { - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - hi2c->MspInitCallback(hi2c); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_I2C_MspInit(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /*Reset I2C*/ - hi2c->Instance->CR1 |= I2C_CR1_SWRST; - hi2c->Instance->CR1 &= ~I2C_CR1_SWRST; - - /* Get PCLK1 frequency */ - pclk1 = HAL_RCC_GetPCLK1Freq(); - - /* Check the minimum allowed PCLK1 frequency */ - if (I2C_MIN_PCLK_FREQ(pclk1, hi2c->Init.ClockSpeed) == 1U) - { - return HAL_ERROR; - } - - /* Calculate frequency range */ - freqrange = I2C_FREQRANGE(pclk1); - - /*---------------------------- I2Cx CR2 Configuration ----------------------*/ - /* Configure I2Cx: Frequency range */ - MODIFY_REG(hi2c->Instance->CR2, I2C_CR2_FREQ, freqrange); - - /*---------------------------- I2Cx TRISE Configuration --------------------*/ - /* Configure I2Cx: Rise Time */ - MODIFY_REG(hi2c->Instance->TRISE, I2C_TRISE_TRISE, I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed)); - - /*---------------------------- I2Cx CCR Configuration ----------------------*/ - /* Configure I2Cx: Speed */ - MODIFY_REG(hi2c->Instance->CCR, (I2C_CCR_FS | I2C_CCR_DUTY | I2C_CCR_CCR), I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle)); - - /*---------------------------- I2Cx CR1 Configuration ----------------------*/ - /* Configure I2Cx: Generalcall and NoStretch mode */ - MODIFY_REG(hi2c->Instance->CR1, (I2C_CR1_ENGC | I2C_CR1_NOSTRETCH), (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode)); - - /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ - /* Configure I2Cx: Own Address1 and addressing mode */ - MODIFY_REG(hi2c->Instance->OAR1, (I2C_OAR1_ADDMODE | I2C_OAR1_ADD8_9 | I2C_OAR1_ADD1_7 | I2C_OAR1_ADD0), (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1)); - - /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ - /* Configure I2Cx: Dual mode and Own Address2 */ - MODIFY_REG(hi2c->Instance->OAR2, (I2C_OAR2_ENDUAL | I2C_OAR2_ADD2), (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2)); - - /* Enable the selected I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - - return HAL_OK; -} - -/** - * @brief DeInitialize the I2C peripheral. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) -{ - /* Check the I2C handle allocation */ - if (hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the I2C Peripheral Clock */ - __HAL_I2C_DISABLE(hi2c); - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - if (hi2c->MspDeInitCallback == NULL) - { - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - hi2c->MspDeInitCallback(hi2c); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_I2C_MspDeInit(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_RESET; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Initialize the I2C MSP. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the I2C MSP. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User I2C Callback - * To be used instead of the weak predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : - hi2c->MasterTxCpltCallback = pCallback; - break; - - case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : - hi2c->MasterRxCpltCallback = pCallback; - break; - - case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : - hi2c->SlaveTxCpltCallback = pCallback; - break; - - case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : - hi2c->SlaveRxCpltCallback = pCallback; - break; - - case HAL_I2C_LISTEN_COMPLETE_CB_ID : - hi2c->ListenCpltCallback = pCallback; - break; - - case HAL_I2C_MEM_TX_COMPLETE_CB_ID : - hi2c->MemTxCpltCallback = pCallback; - break; - - case HAL_I2C_MEM_RX_COMPLETE_CB_ID : - hi2c->MemRxCpltCallback = pCallback; - break; - - case HAL_I2C_ERROR_CB_ID : - hi2c->ErrorCallback = pCallback; - break; - - case HAL_I2C_ABORT_CB_ID : - hi2c->AbortCpltCallback = pCallback; - break; - - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = pCallback; - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2C_STATE_RESET == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = pCallback; - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief Unregister an I2C Callback - * I2C callback is redirected to the weak predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * This parameter can be one of the following values: - * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : - hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - break; - - case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : - hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - break; - - case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : - hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - break; - - case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : - hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - break; - - case HAL_I2C_LISTEN_COMPLETE_CB_ID : - hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - break; - - case HAL_I2C_MEM_TX_COMPLETE_CB_ID : - hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - break; - - case HAL_I2C_MEM_RX_COMPLETE_CB_ID : - hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - break; - - case HAL_I2C_ERROR_CB_ID : - hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_I2C_ABORT_CB_ID : - hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2C_STATE_RESET == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief Register the Slave Address Match I2C Callback - * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pCallback pointer to the Address Match Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - hi2c->AddrCallback = pCallback; - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief UnRegister the Slave Address Match I2C Callback - * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2C data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2C_Master_Transmit() - (++) HAL_I2C_Master_Receive() - (++) HAL_I2C_Slave_Transmit() - (++) HAL_I2C_Slave_Receive() - (++) HAL_I2C_Mem_Write() - (++) HAL_I2C_Mem_Read() - (++) HAL_I2C_IsDeviceReady() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2C_Master_Transmit_IT() - (++) HAL_I2C_Master_Receive_IT() - (++) HAL_I2C_Slave_Transmit_IT() - (++) HAL_I2C_Slave_Receive_IT() - (++) HAL_I2C_Mem_Write_IT() - (++) HAL_I2C_Mem_Read_IT() - (++) HAL_I2C_Master_Seq_Transmit_IT() - (++) HAL_I2C_Master_Seq_Receive_IT() - (++) HAL_I2C_Slave_Seq_Transmit_IT() - (++) HAL_I2C_Slave_Seq_Receive_IT() - (++) HAL_I2C_EnableListen_IT() - (++) HAL_I2C_DisableListen_IT() - (++) HAL_I2C_Master_Abort_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2C_Master_Transmit_DMA() - (++) HAL_I2C_Master_Receive_DMA() - (++) HAL_I2C_Slave_Transmit_DMA() - (++) HAL_I2C_Slave_Receive_DMA() - (++) HAL_I2C_Mem_Write_DMA() - (++) HAL_I2C_Mem_Read_DMA() - (++) HAL_I2C_Master_Seq_Transmit_DMA() - (++) HAL_I2C_Master_Seq_Receive_DMA() - (++) HAL_I2C_Slave_Seq_Transmit_DMA() - (++) HAL_I2C_Slave_Seq_Receive_DMA() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_I2C_MasterTxCpltCallback() - (++) HAL_I2C_MasterRxCpltCallback() - (++) HAL_I2C_SlaveTxCpltCallback() - (++) HAL_I2C_SlaveRxCpltCallback() - (++) HAL_I2C_MemTxCpltCallback() - (++) HAL_I2C_MemRxCpltCallback() - (++) HAL_I2C_AddrCallback() - (++) HAL_I2C_ListenCpltCallback() - (++) HAL_I2C_ErrorCallback() - (++) HAL_I2C_AbortCpltCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmits in master mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - /* Init tickstart for timeout management*/ - uint32_t tickstart = HAL_GetTick(); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Send Slave Address */ - if (I2C_MasterRequestWrite(hi2c, DevAddress, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - while (hi2c->XferSize > 0U) - { - /* Wait until TXE flag is set */ - if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - hi2c->XferSize--; - - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) - { - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - hi2c->XferSize--; - } - - /* Wait until BTF flag is set */ - if (I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - } - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives in master mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - /* Init tickstart for timeout management*/ - uint32_t tickstart = HAL_GetTick(); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Send Slave Address */ - if (I2C_MasterRequestRead(hi2c, DevAddress, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferSize == 0U) - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - else if (hi2c->XferSize == 1U) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - else if (hi2c->XferSize == 2U) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Enable Pos */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - while (hi2c->XferSize > 0U) - { - if (hi2c->XferSize <= 3U) - { - /* One byte */ - if (hi2c->XferSize == 1U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - /* Two bytes */ - else if (hi2c->XferSize == 2U) - { - /* Wait until BTF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - /* 3 Last bytes */ - else - { - /* Wait until BTF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - /* Wait until BTF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - } - else - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - } - } - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmits in slave mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - /* Init tickstart for timeout management*/ - uint32_t tickstart = HAL_GetTick(); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* If 10bit addressing mode is selected */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - while (hi2c->XferSize > 0U) - { - /* Wait until TXE flag is set */ - if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - return HAL_ERROR; - } - - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - hi2c->XferSize--; - - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) - { - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - hi2c->XferSize--; - } - } - - /* Wait until AF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Disable Address Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in blocking mode - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - /* Init tickstart for timeout management*/ - uint32_t tickstart = HAL_GetTick(); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == (uint16_t)0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - while (hi2c->XferSize > 0U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - return HAL_ERROR; - } - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - } - - /* Wait until STOP flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - return HAL_ERROR; - } - - /* Clear STOP flag */ - __HAL_I2C_CLEAR_STOPFLAG(hi2c); - - /* Disable Address Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - __IO uint32_t count = 0U; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - __IO uint32_t count = 0U; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - __IO uint32_t count = 0U; - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferM1CpltCallback = NULL; - hi2c->hdmatx->XferM1HalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - __IO uint32_t count = 0U; - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferM1CpltCallback = NULL; - hi2c->hdmarx->XferM1HalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferM1CpltCallback = NULL; - hi2c->hdmatx->XferM1HalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - - return HAL_OK; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferM1CpltCallback = NULL; - hi2c->hdmarx->XferM1HalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - return HAL_OK; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Write an amount of data in blocking mode to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - /* Init tickstart for timeout management*/ - uint32_t tickstart = HAL_GetTick(); - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - while (hi2c->XferSize > 0U) - { - /* Wait until TXE flag is set */ - if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) - { - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - } - - /* Wait until BTF flag is set */ - if (I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in blocking mode from a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - /* Init tickstart for timeout management*/ - uint32_t tickstart = HAL_GetTick(); - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferSize == 0U) - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - else if (hi2c->XferSize == 1U) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - else if (hi2c->XferSize == 2U) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Enable Pos */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - while (hi2c->XferSize > 0U) - { - if (hi2c->XferSize <= 3U) - { - /* One byte */ - if (hi2c->XferSize == 1U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - /* Two bytes */ - else if (hi2c->XferSize == 2U) - { - /* Wait until BTF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - /* 3 Last bytes */ - else - { - /* Wait until BTF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - /* Wait until BTF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - } - else - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferSize--; - hi2c->XferCount--; - } - } - } - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - __IO uint32_t count = 0U; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - hi2c->Memaddress = MemAddress; - hi2c->MemaddSize = MemAddSize; - hi2c->EventCount = 0U; - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - __IO uint32_t count = 0U; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - hi2c->Memaddress = MemAddress; - hi2c->MemaddSize = MemAddSize; - hi2c->EventCount = 0U; - - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - if (hi2c->XferSize > 0U) - { - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - } - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - __IO uint32_t count = 0U; - HAL_StatusTypeDef dmaxferstatus; - - /* Init tickstart for timeout management*/ - uint32_t tickstart = HAL_GetTick(); - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - hi2c->Memaddress = MemAddress; - hi2c->MemaddSize = MemAddSize; - hi2c->EventCount = 0U; - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferM1CpltCallback = NULL; - hi2c->hdmatx->XferM1HalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Abort the ongoing DMA */ - dmaxferstatus = HAL_DMA_Abort_IT(hi2c->hdmatx); - - /* Prevent unused argument(s) compilation and MISRA warning */ - UNUSED(dmaxferstatus); - - /* Set the unused I2C DMA transfer complete callback to NULL */ - hi2c->hdmatx->XferCpltCallback = NULL; - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - hi2c->XferSize = 0U; - hi2c->XferCount = 0U; - - /* Disable I2C peripheral to prevent dummy data in buffer */ - __HAL_I2C_DISABLE(hi2c); - - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR); - - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - return HAL_OK; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be read - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - /* Init tickstart for timeout management*/ - uint32_t tickstart = HAL_GetTick(); - __IO uint32_t count = 0U; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->Devaddress = DevAddress; - hi2c->Memaddress = MemAddress; - hi2c->MemaddSize = MemAddSize; - hi2c->EventCount = 0U; - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferM1CpltCallback = NULL; - hi2c->hdmarx->XferM1HalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Abort the ongoing DMA */ - dmaxferstatus = HAL_DMA_Abort_IT(hi2c->hdmarx); - - /* Prevent unused argument(s) compilation and MISRA warning */ - UNUSED(dmaxferstatus); - - /* Set the unused I2C DMA transfer complete callback to NULL */ - hi2c->hdmarx->XferCpltCallback = NULL; - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - hi2c->XferSize = 0U; - hi2c->XferCount = 0U; - - /* Disable I2C peripheral to prevent dummy data in buffer */ - __HAL_I2C_DISABLE(hi2c); - - return HAL_ERROR; - } - - if (hi2c->XferSize == 1U) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - else - { - /* Enable Last DMA bit */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR); - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Checks if target device is ready for communication. - * @note This function is used with Memory devices - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Trials Number of trials - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) -{ - /* Get tick */ - uint32_t tickstart = HAL_GetTick(); - uint32_t I2C_Trials = 0U; - FlagStatus tmp1; - FlagStatus tmp2; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - do - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Wait until SB flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, tickstart) != HAL_OK) - { - if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) - { - hi2c->ErrorCode = HAL_I2C_WRONG_START; - } - return HAL_TIMEOUT; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); - - /* Wait until ADDR or AF flag are set */ - /* Get tick */ - tickstart = HAL_GetTick(); - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - while ((hi2c->State != HAL_I2C_STATE_TIMEOUT) && (tmp1 == RESET) && (tmp2 == RESET)) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->State = HAL_I2C_STATE_TIMEOUT; - } - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - } - - hi2c->State = HAL_I2C_STATE_READY; - - /* Check if the ADDR flag has been set */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - /* Clear ADDR Flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - /* Clear AF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - } - - /* Increment Trials */ - I2C_Trials++; - } - while (I2C_Trials < Trials); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - __IO uint32_t Prev_State = 0x00U; - __IO uint32_t count = 0x00U; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Check Busy Flag only if FIRST call of Master interface */ - if ((READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP) || (XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->Devaddress = DevAddress; - - Prev_State = hi2c->PreviousState; - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((Prev_State != I2C_STATE_MASTER_BUSY_TX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - __IO uint32_t Prev_State = 0x00U; - __IO uint32_t count = 0x00U; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Check Busy Flag only if FIRST call of Master interface */ - if ((READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP) || (XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->Devaddress = DevAddress; - - Prev_State = hi2c->PreviousState; - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((Prev_State != I2C_STATE_MASTER_BUSY_TX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* If XferOptions is not associated to a new frame, mean no start bit is request, enable directly the DMA request */ - /* In other cases, DMA request is enabled after Slave address treatment in IRQHandler */ - if ((XferOptions == I2C_NEXT_FRAME) || (XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP)) - { - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - } - - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((Prev_State != I2C_STATE_MASTER_BUSY_TX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - __IO uint32_t Prev_State = 0x00U; - __IO uint32_t count = 0U; - uint32_t enableIT = (I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Check Busy Flag only if FIRST call of Master interface */ - if ((READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP) || (XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->Devaddress = DevAddress; - - Prev_State = hi2c->PreviousState; - - if ((hi2c->XferCount == 2U) && ((XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP))) - { - if (Prev_State == I2C_STATE_MASTER_BUSY_RX) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Enable Pos */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - /* Remove Enabling of IT_BUF, mean RXNE treatment, treat the 2 bytes through BTF */ - enableIT &= ~I2C_IT_BUF; - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((Prev_State != I2C_STATE_MASTER_BUSY_RX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable interrupts */ - __HAL_I2C_ENABLE_IT(hi2c, enableIT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - __IO uint32_t Prev_State = 0x00U; - __IO uint32_t count = 0U; - uint32_t enableIT = (I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Check Busy Flag only if FIRST call of Master interface */ - if ((READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP) || (XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) - { - /* Wait until BUSY flag is reset */ - count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - /* Clear Last DMA bit */ - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->Devaddress = DevAddress; - - Prev_State = hi2c->PreviousState; - - if (hi2c->XferSize > 0U) - { - if ((hi2c->XferCount == 2U) && ((XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP))) - { - if (Prev_State == I2C_STATE_MASTER_BUSY_RX) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Enable Pos */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - /* Enable Last DMA bit */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - if ((XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_OTHER_AND_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP)) - { - /* Enable Last DMA bit */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); - } - } - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - if (dmaxferstatus == HAL_OK) - { - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((Prev_State != I2C_STATE_MASTER_BUSY_RX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Update interrupt for only EVT and ERR */ - enableIT = (I2C_IT_EVT | I2C_IT_ERR); - } - else - { - /* Update interrupt for only ERR */ - enableIT = I2C_IT_ERR; - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* If XferOptions is not associated to a new frame, mean no start bit is request, enable directly the DMA request */ - /* In other cases, DMA request is enabled after Slave address treatment in IRQHandler */ - if ((XferOptions == I2C_NEXT_FRAME) || (XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP)) - { - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - } - - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, enableIT); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((Prev_State != I2C_STATE_MASTER_BUSY_RX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable interrupts */ - __HAL_I2C_ENABLE_IT(hi2c, enableIT); - } - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in slave mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in slave mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) - { - /* Abort DMA Xfer if any */ - if (hi2c->hdmarx != NULL) - { - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) - { - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - else - { - /* Nothing to do */ - } - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - - return HAL_OK; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in slave mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in slave mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) - { - /* Abort DMA Xfer if any */ - if (hi2c->hdmarx != NULL) - { - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) - { - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - else - { - /* Nothing to do */ - } - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Disable Pos */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - - hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - return HAL_OK; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable the Address listen mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - hi2c->State = HAL_I2C_STATE_LISTEN; - - /* Check if the I2C is already enabled */ - if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) - { - /* Enable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - } - - /* Enable Address Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Enable EVT and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable the Address listen mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of tmp to prevent undefined behavior of volatile usage */ - uint32_t tmp; - - /* Disable Address listen mode only if a transfer is not ongoing */ - if (hi2c->State == HAL_I2C_STATE_LISTEN) - { - tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; - hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Disable Address Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Disable EVT and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Abort a master I2C IT or DMA process communication with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(DevAddress); - - /* Abort Master transfer during Receive or Transmit process */ - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && (CurrentMode == HAL_I2C_MODE_MASTER)) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_ABORT; - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - hi2c->XferCount = 0U; - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c); - - return HAL_OK; - } - else - { - /* Wrong usage of abort function */ - /* This function should be used only in case of abort monitored by master device */ - /* Or periphal is not in busy state, mean there is no active sequence to be abort */ - return HAL_ERROR; - } -} - -/** - * @} - */ - -/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ - -/** - * @brief This function handles I2C event interrupt request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - uint32_t sr1itflags; - uint32_t sr2itflags = 0U; - uint32_t itsources = READ_REG(hi2c->Instance->CR2); - uint32_t CurrentXferOptions = hi2c->XferOptions; - HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - - /* Master or Memory mode selected */ - if ((CurrentMode == HAL_I2C_MODE_MASTER) || (CurrentMode == HAL_I2C_MODE_MEM)) - { - sr2itflags = READ_REG(hi2c->Instance->SR2); - sr1itflags = READ_REG(hi2c->Instance->SR1); - - /* Exit IRQ event until Start Bit detected in case of Other frame requested */ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_SB) == RESET) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(CurrentXferOptions) == 1U)) - { - return; - } - - /* SB Set ----------------------------------------------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_SB) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - I2C_Master_SB(hi2c); - } - /* ADD10 Set -------------------------------------------------------------*/ - else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_ADD10) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - I2C_Master_ADD10(hi2c); - } - /* ADDR Set --------------------------------------------------------------*/ - else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - I2C_Master_ADDR(hi2c); - } - /* I2C in mode Transmitter -----------------------------------------------*/ - else if (I2C_CHECK_FLAG(sr2itflags, I2C_FLAG_TRA) != RESET) - { - /* Do not check buffer and BTF flag if a Xfer DMA is on going */ - if (READ_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN) != I2C_CR2_DMAEN) - { - /* TXE set and BTF reset -----------------------------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_TXE) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_BUF) != RESET) && (I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) == RESET)) - { - I2C_MasterTransmit_TXE(hi2c); - } - /* BTF set -------------------------------------------------------------*/ - else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - if (CurrentState == HAL_I2C_STATE_BUSY_TX) - { - I2C_MasterTransmit_BTF(hi2c); - } - else /* HAL_I2C_MODE_MEM */ - { - if (CurrentMode == HAL_I2C_MODE_MEM) - { - I2C_MemoryTransmit_TXE_BTF(hi2c); - } - } - } - else - { - /* Do nothing */ - } - } - } - /* I2C in mode Receiver --------------------------------------------------*/ - else - { - /* Do not check buffer and BTF flag if a Xfer DMA is on going */ - if (READ_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN) != I2C_CR2_DMAEN) - { - /* RXNE set and BTF reset -----------------------------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_BUF) != RESET) && (I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) == RESET)) - { - I2C_MasterReceive_RXNE(hi2c); - } - /* BTF set -------------------------------------------------------------*/ - else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - I2C_MasterReceive_BTF(hi2c); - } - else - { - /* Do nothing */ - } - } - } - } - /* Slave mode selected */ - else - { - /* If an error is detected, read only SR1 register to prevent */ - /* a clear of ADDR flags by reading SR2 after reading SR1 in Error treatment */ - if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - sr1itflags = READ_REG(hi2c->Instance->SR1); - } - else - { - sr2itflags = READ_REG(hi2c->Instance->SR2); - sr1itflags = READ_REG(hi2c->Instance->SR1); - } - - /* ADDR set --------------------------------------------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - /* Now time to read SR2, this will clear ADDR flag automatically */ - if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - sr2itflags = READ_REG(hi2c->Instance->SR2); - } - I2C_Slave_ADDR(hi2c, sr2itflags); - } - /* STOPF set --------------------------------------------------------------*/ - else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - I2C_Slave_STOPF(hi2c); - } - /* I2C in mode Transmitter -----------------------------------------------*/ - else if ((CurrentState == HAL_I2C_STATE_BUSY_TX) || (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN)) - { - /* TXE set and BTF reset -----------------------------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_TXE) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_BUF) != RESET) && (I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) == RESET)) - { - I2C_SlaveTransmit_TXE(hi2c); - } - /* BTF set -------------------------------------------------------------*/ - else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - I2C_SlaveTransmit_BTF(hi2c); - } - else - { - /* Do nothing */ - } - } - /* I2C in mode Receiver --------------------------------------------------*/ - else - { - /* RXNE set and BTF reset ----------------------------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_BUF) != RESET) && (I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) == RESET)) - { - I2C_SlaveReceive_RXNE(hi2c); - } - /* BTF set -------------------------------------------------------------*/ - else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) - { - I2C_SlaveReceive_BTF(hi2c); - } - else - { - /* Do nothing */ - } - } - } -} - -/** - * @brief This function handles I2C error interrupt request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - HAL_I2C_ModeTypeDef tmp1; - uint32_t tmp2; - HAL_I2C_StateTypeDef tmp3; - uint32_t tmp4; - uint32_t sr1itflags = READ_REG(hi2c->Instance->SR1); - uint32_t itsources = READ_REG(hi2c->Instance->CR2); - uint32_t error = HAL_I2C_ERROR_NONE; - HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; - - /* I2C Bus error interrupt occurred ----------------------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERR) != RESET)) - { - error |= HAL_I2C_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); - } - - /* I2C Arbitration Lost error interrupt occurred ---------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERR) != RESET)) - { - error |= HAL_I2C_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); - } - - /* I2C Acknowledge failure error interrupt occurred ------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERR) != RESET)) - { - tmp1 = CurrentMode; - tmp2 = hi2c->XferCount; - tmp3 = hi2c->State; - tmp4 = hi2c->PreviousState; - if ((tmp1 == HAL_I2C_MODE_SLAVE) && (tmp2 == 0U) && \ - ((tmp3 == HAL_I2C_STATE_BUSY_TX) || (tmp3 == HAL_I2C_STATE_BUSY_TX_LISTEN) || \ - ((tmp3 == HAL_I2C_STATE_LISTEN) && (tmp4 == I2C_STATE_SLAVE_BUSY_TX)))) - { - I2C_Slave_AF(hi2c); - } - else - { - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - error |= HAL_I2C_ERROR_AF; - - /* Do not generate a STOP in case of Slave receive non acknowledge during transfer (mean not at the end of transfer) */ - if ((CurrentMode == HAL_I2C_MODE_MASTER) || (CurrentMode == HAL_I2C_MODE_MEM)) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - } - } - - /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/ - if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERR) != RESET)) - { - error |= HAL_I2C_ERROR_OVR; - /* Clear OVR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); - } - - /* Call the Error Callback in case of Error detected -----------------------*/ - if (error != HAL_I2C_ERROR_NONE) - { - hi2c->ErrorCode |= error; - I2C_ITError(hi2c); - } -} - -/** - * @brief Master Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MasterTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Master Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MasterRxCpltCallback could be implemented in the user file - */ -} - -/** @brief Slave Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Address Match callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XferDirection_definition - * @param AddrMatchCode Address Match Code - * @retval None - */ -__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - UNUSED(TransferDirection); - UNUSED(AddrMatchCode); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_AddrCallback() could be implemented in the user file - */ -} - -/** - * @brief Listen Complete callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_ListenCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Memory Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MemTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Memory Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MemRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief I2C error callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief I2C abort callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_AbortCpltCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @brief Peripheral State, Mode and Error functions - * -@verbatim - =============================================================================== - ##### Peripheral State, Mode and Error functions ##### - =============================================================================== - [..] - This subsection permit to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the I2C handle state. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL state - */ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) -{ - /* Return I2C handle state */ - return hi2c->State; -} - -/** - * @brief Returns the I2C Master, Slave, Memory or no mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL mode - */ -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) -{ - return hi2c->Mode; -} - -/** - * @brief Return the I2C error code. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval I2C Error Code - */ -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) -{ - return hi2c->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup I2C_Private_Functions - * @{ - */ - -/** - * @brief Handle TXE flag for Master - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; - uint32_t CurrentXferOptions = hi2c->XferOptions; - - if ((hi2c->XferSize == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX)) - { - /* Call TxCpltCallback() directly if no stop mode is set */ - if ((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME)) - { - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else /* Generate Stop condition then Call TxCpltCallback() */ - { - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemTxCpltCallback(hi2c); -#else - HAL_I2C_MemTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - } - else if ((CurrentState == HAL_I2C_STATE_BUSY_TX) || \ - ((CurrentMode == HAL_I2C_MODE_MEM) && (CurrentState == HAL_I2C_STATE_BUSY_RX))) - { - if (hi2c->XferCount == 0U) - { - /* Disable BUF interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - } - else - { - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - I2C_MemoryTransmit_TXE_BTF(hi2c); - } - else - { - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } - } - } - else - { - /* Do nothing */ - } -} - -/** - * @brief Handle BTF flag for Master transmitter - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentXferOptions = hi2c->XferOptions; - - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - if (hi2c->XferCount != 0U) - { - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } - else - { - /* Call TxCpltCallback() directly if no stop mode is set */ - if ((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME)) - { - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else /* Generate Stop condition then Call TxCpltCallback() */ - { - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemTxCpltCallback(hi2c); -#else - HAL_I2C_MemTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - } - } - else - { - /* Do nothing */ - } -} - -/** - * @brief Handle TXE and BTF flag for Memory transmitter - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_MemoryTransmit_TXE_BTF(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - - if (hi2c->EventCount == 0U) - { - /* If Memory address size is 8Bit */ - if (hi2c->MemaddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(hi2c->Memaddress); - - hi2c->EventCount += 2U; - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_MSB(hi2c->Memaddress); - - hi2c->EventCount++; - } - } - else if (hi2c->EventCount == 1U) - { - /* Send LSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(hi2c->Memaddress); - - hi2c->EventCount++; - } - else if (hi2c->EventCount == 2U) - { - if (CurrentState == HAL_I2C_STATE_BUSY_RX) - { - /* Generate Restart */ - hi2c->Instance->CR1 |= I2C_CR1_START; - - hi2c->EventCount++; - } - else if ((hi2c->XferCount > 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX)) - { - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } - else if ((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX)) - { - /* Generate Stop condition then Call TxCpltCallback() */ - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemTxCpltCallback(hi2c); -#else - HAL_I2C_MemTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Do nothing */ - } - } - else - { - /* Do nothing */ - } -} - -/** - * @brief Handle RXNE flag for Master - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - uint32_t tmp; - - tmp = hi2c->XferCount; - if (tmp > 3U) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - - if (hi2c->XferCount == (uint16_t)3) - { - /* Disable BUF interrupt, this help to treat correctly the last 4 bytes - on BTF subroutine */ - /* Disable BUF interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - } - } - else if ((hi2c->XferOptions != I2C_FIRST_AND_NEXT_FRAME) && ((tmp == 1U) || (tmp == 0U))) - { - if (I2C_WaitOnSTOPRequestThroughIT(hi2c) == HAL_OK) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - - hi2c->State = HAL_I2C_STATE_READY; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->PreviousState = I2C_STATE_NONE; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemRxCpltCallback(hi2c); -#else - HAL_I2C_MemRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Call user error callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - /* Disable BUF interrupt, this help to treat correctly the last 2 bytes - on BTF subroutine if there is a reception delay between N-1 and N byte */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - } - } -} - -/** - * @brief Handle BTF flag for Master receiver - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - uint32_t CurrentXferOptions = hi2c->XferOptions; - - if (hi2c->XferCount == 4U) - { - /* Disable BUF interrupt, this help to treat correctly the last 2 bytes - on BTF subroutine if there is a reception delay between N-1 and N byte */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } - else if (hi2c->XferCount == 3U) - { - /* Disable BUF interrupt, this help to treat correctly the last 2 bytes - on BTF subroutine if there is a reception delay between N-1 and N byte */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - - if ((CurrentXferOptions != I2C_NEXT_FRAME) && (CurrentXferOptions != I2C_FIRST_AND_NEXT_FRAME)) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } - else if (hi2c->XferCount == 2U) - { - /* Prepare next transfer or stop current transfer */ - if ((CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME_NO_STOP)) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - else if ((CurrentXferOptions == I2C_NEXT_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_NEXT_FRAME)) - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - else if (CurrentXferOptions != I2C_LAST_FRAME_NO_STOP) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - else - { - /* Do nothing */ - } - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - - /* Disable EVT and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - hi2c->State = HAL_I2C_STATE_READY; - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->PreviousState = I2C_STATE_NONE; -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemRxCpltCallback(hi2c); -#else - HAL_I2C_MemRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } -} - -/** - * @brief Handle SB flag for Master - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_Master_SB(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - if (hi2c->EventCount == 0U) - { - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress); - } - else - { - hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress); - } - } - else - { - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - /* Send slave 7 Bits address */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress); - } - else - { - hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress); - } - - if (((hi2c->hdmatx != NULL) && (hi2c->hdmatx->XferCpltCallback != NULL)) - || ((hi2c->hdmarx != NULL) && (hi2c->hdmarx->XferCpltCallback != NULL))) - { - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - } - } - else - { - if (hi2c->EventCount == 0U) - { - /* Send header of slave address */ - hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(hi2c->Devaddress); - } - else if (hi2c->EventCount == 1U) - { - /* Send header of slave address */ - hi2c->Instance->DR = I2C_10BIT_HEADER_READ(hi2c->Devaddress); - } - else - { - /* Do nothing */ - } - } - } -} - -/** - * @brief Handle ADD10 flag for Master - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_Master_ADD10(I2C_HandleTypeDef *hi2c) -{ - /* Send slave address */ - hi2c->Instance->DR = I2C_10BIT_ADDRESS(hi2c->Devaddress); - - if (((hi2c->hdmatx != NULL) && (hi2c->hdmatx->XferCpltCallback != NULL)) - || ((hi2c->hdmarx != NULL) && (hi2c->hdmarx->XferCpltCallback != NULL))) - { - /* Enable DMA Request */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - } -} - -/** - * @brief Handle ADDR flag for Master - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_Master_ADDR(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; - uint32_t CurrentXferOptions = hi2c->XferOptions; - uint32_t Prev_State = hi2c->PreviousState; - - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - if ((hi2c->EventCount == 0U) && (CurrentMode == HAL_I2C_MODE_MEM)) - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else if ((hi2c->EventCount == 0U) && (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)) - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Restart */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - hi2c->EventCount++; - } - else - { - if (hi2c->XferCount == 0U) - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - else if (hi2c->XferCount == 1U) - { - if (CurrentXferOptions == I2C_NO_OPTION_FRAME) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - } - /* Prepare next transfer or stop current transfer */ - else if ((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) \ - && ((Prev_State != I2C_STATE_MASTER_BUSY_RX) || (CurrentXferOptions == I2C_FIRST_FRAME))) - { - if ((CurrentXferOptions != I2C_NEXT_FRAME) && (CurrentXferOptions != I2C_FIRST_AND_NEXT_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME_NO_STOP)) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - } - else if (hi2c->XferCount == 2U) - { - if ((CurrentXferOptions != I2C_NEXT_FRAME) && (CurrentXferOptions != I2C_FIRST_AND_NEXT_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME_NO_STOP)) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Enable Pos */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - - if (((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) && ((CurrentXferOptions == I2C_NO_OPTION_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME_NO_STOP) || (CurrentXferOptions == I2C_LAST_FRAME))) - { - /* Enable Last DMA bit */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - if (((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) && ((CurrentXferOptions == I2C_NO_OPTION_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME_NO_STOP) || (CurrentXferOptions == I2C_LAST_FRAME))) - { - /* Enable Last DMA bit */ - SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - /* Reset Event counter */ - hi2c->EventCount = 0U; - } - } - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } -} - -/** - * @brief Handle TXE flag for Slave - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - - if (hi2c->XferCount != 0U) - { - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - - if ((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN)) - { - /* Last Byte is received, disable Interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - - /* Set state at HAL_I2C_STATE_LISTEN */ - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - hi2c->State = HAL_I2C_STATE_LISTEN; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief Handle BTF flag for Slave transmitter - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->XferCount != 0U) - { - /* Write data to DR */ - hi2c->Instance->DR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } -} - -/** - * @brief Handle RXNE flag for Slave - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - - if (hi2c->XferCount != 0U) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - - if ((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - /* Last Byte is received, disable Interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - - /* Set state at HAL_I2C_STATE_LISTEN */ - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - hi2c->State = HAL_I2C_STATE_LISTEN; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief Handle BTF flag for Slave receiver - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->XferCount != 0U) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } -} - -/** - * @brief Handle ADD flag for Slave - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param IT2Flags Interrupt2 flags to handle. - * @retval None - */ -static void I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c, uint32_t IT2Flags) -{ - uint8_t TransferDirection = I2C_DIRECTION_RECEIVE; - uint16_t SlaveAddrCode; - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* Disable BUF interrupt, BUF enabling is manage through slave specific interface */ - __HAL_I2C_DISABLE_IT(hi2c, (I2C_IT_BUF)); - - /* Transfer Direction requested by Master */ - if (I2C_CHECK_FLAG(IT2Flags, I2C_FLAG_TRA) == RESET) - { - TransferDirection = I2C_DIRECTION_TRANSMIT; - } - - if (I2C_CHECK_FLAG(IT2Flags, I2C_FLAG_DUALF) == RESET) - { - SlaveAddrCode = (uint16_t)hi2c->Init.OwnAddress1; - } - else - { - SlaveAddrCode = (uint16_t)hi2c->Init.OwnAddress2; - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, TransferDirection, SlaveAddrCode); -#else - HAL_I2C_AddrCallback(hi2c, TransferDirection, SlaveAddrCode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - } -} - -/** - * @brief Handle STOPF flag for Slave - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Clear STOPF flag */ - __HAL_I2C_CLEAR_STOPFLAG(hi2c); - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* If a DMA is ongoing, Update handle size context */ - if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) - { - if ((CurrentState == HAL_I2C_STATE_BUSY_RX) || (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - hi2c->XferCount = (uint16_t)(__HAL_DMA_GET_COUNTER(hi2c->hdmarx)); - - if (hi2c->XferCount != 0U) - { - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - - /* Disable, stop the current DMA */ - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - /* Abort DMA Xfer if any */ - if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - else - { - hi2c->XferCount = (uint16_t)(__HAL_DMA_GET_COUNTER(hi2c->hdmatx)); - - if (hi2c->XferCount != 0U) - { - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - - /* Disable, stop the current DMA */ - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - /* Abort DMA Xfer if any */ - if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - - /* All data are not transferred, so set error code accordingly */ - if (hi2c->XferCount != 0U) - { - /* Store Last receive data if any */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } - - /* Store Last receive data if any */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - /* Update counter */ - hi2c->XferCount--; - } - - if (hi2c->XferCount != 0U) - { - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - } - - if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c); - } - else - { - if (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Set state at HAL_I2C_STATE_LISTEN */ - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_LISTEN; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - if (hi2c->State == HAL_I2C_STATE_LISTEN) - { - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - if ((hi2c->PreviousState == I2C_STATE_SLAVE_BUSY_RX) || (CurrentState == HAL_I2C_STATE_BUSY_RX)) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - } -} - -/** - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -static void I2C_Slave_AF(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - uint32_t CurrentXferOptions = hi2c->XferOptions; - - if (((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME)) && \ - (CurrentState == HAL_I2C_STATE_LISTEN)) - { - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else if (CurrentState == HAL_I2C_STATE_BUSY_TX) - { - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Clear AF flag only */ - /* State Listen, but XferOptions == FIRST or NEXT */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } -} - -/** - * @brief I2C interrupts error process - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ITError(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; - uint32_t CurrentError; - - if (((CurrentMode == HAL_I2C_MODE_MASTER) || (CurrentMode == HAL_I2C_MODE_MEM)) && (CurrentState == HAL_I2C_STATE_BUSY_RX)) - { - /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - } - - if (((uint32_t)CurrentState & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* keep HAL_I2C_STATE_LISTEN */ - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_LISTEN; - } - else - { - /* If state is an abort treatment on going, don't change state */ - /* This change will be do later */ - if ((READ_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN) != I2C_CR2_DMAEN) && (CurrentState != HAL_I2C_STATE_ABORT)) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - } - hi2c->PreviousState = I2C_STATE_NONE; - } - - /* Abort DMA transfer */ - if (READ_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN) == I2C_CR2_DMAEN) - { - hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; - - if (hi2c->hdmatx->State != HAL_DMA_STATE_READY) - { - /* Set the DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Disable I2C peripheral to prevent dummy data in buffer */ - __HAL_I2C_DISABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - else - { - /* Set the DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Store Last receive data if any */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - } - - /* Disable I2C peripheral to prevent dummy data in buffer */ - __HAL_I2C_DISABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - else if (hi2c->State == HAL_I2C_STATE_ABORT) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Store Last receive data if any */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - } - - /* Disable I2C peripheral to prevent dummy data in buffer */ - __HAL_I2C_DISABLE(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AbortCpltCallback(hi2c); -#else - HAL_I2C_AbortCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Store Last receive data if any */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) - { - /* Read data from DR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - } - - /* Call user error callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - /* STOP Flag is not set after a NACK reception, BusError, ArbitrationLost, OverRun */ - CurrentError = hi2c->ErrorCode; - - if (((CurrentError & HAL_I2C_ERROR_BERR) == HAL_I2C_ERROR_BERR) || \ - ((CurrentError & HAL_I2C_ERROR_ARLO) == HAL_I2C_ERROR_ARLO) || \ - ((CurrentError & HAL_I2C_ERROR_AF) == HAL_I2C_ERROR_AF) || \ - ((CurrentError & HAL_I2C_ERROR_OVR) == HAL_I2C_ERROR_OVR)) - { - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - } - - /* So may inform upper layer that listen phase is stopped */ - /* during NACK error treatment */ - CurrentState = hi2c->State; - if (((hi2c->ErrorCode & HAL_I2C_ERROR_AF) == HAL_I2C_ERROR_AF) && (CurrentState == HAL_I2C_STATE_LISTEN)) - { - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart) -{ - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - uint32_t CurrentXferOptions = hi2c->XferOptions; - - /* Generate Start condition if first transfer */ - if ((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME)) - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - else if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) - { - /* Generate ReStart */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - else - { - /* Do nothing */ - } - - /* Wait until SB flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) - { - if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) - { - hi2c->ErrorCode = HAL_I2C_WRONG_START; - } - return HAL_TIMEOUT; - } - - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); - } - else - { - /* Send header of slave address */ - hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); - - /* Wait until ADD10 flag is set */ - if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); - } - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address for read request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart) -{ - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - uint32_t CurrentXferOptions = hi2c->XferOptions; - - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start condition if first transfer */ - if ((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME)) - { - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - else if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) - { - /* Generate ReStart */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - } - else - { - /* Do nothing */ - } - - /* Wait until SB flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) - { - if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) - { - hi2c->ErrorCode = HAL_I2C_WRONG_START; - } - return HAL_TIMEOUT; - } - - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); - } - else - { - /* Send header of slave address */ - hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); - - /* Wait until ADD10 flag is set */ - if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Restart */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Wait until SB flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) - { - if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) - { - hi2c->ErrorCode = HAL_I2C_WRONG_START; - } - return HAL_TIMEOUT; - } - - /* Send header of slave address */ - hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress); - } - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for write request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) -{ - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Wait until SB flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) - { - if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) - { - hi2c->ErrorCode = HAL_I2C_WRONG_START; - } - return HAL_TIMEOUT; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Wait until TXE flag is set */ - if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXE flag is set */ - if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for read request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) -{ - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* Generate Start */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Wait until SB flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) - { - if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) - { - hi2c->ErrorCode = HAL_I2C_WRONG_START; - } - return HAL_TIMEOUT; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Wait until TXE flag is set */ - if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXE flag is set */ - if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TXE flag is set */ - if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - return HAL_ERROR; - } - - /* Generate Restart */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); - - /* Wait until SB flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) - { - if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) - { - hi2c->ErrorCode = HAL_I2C_WRONG_START; - } - return HAL_TIMEOUT; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief DMA I2C process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; - uint32_t CurrentXferOptions = hi2c->XferOptions; - - /* Disable EVT and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* Clear Complete callback */ - if (hi2c->hdmatx != NULL) - { - hi2c->hdmatx->XferCpltCallback = NULL; - } - if (hi2c->hdmarx != NULL) - { - hi2c->hdmarx->XferCpltCallback = NULL; - } - - if ((((uint32_t)CurrentState & (uint32_t)HAL_I2C_STATE_BUSY_TX) == (uint32_t)HAL_I2C_STATE_BUSY_TX) || ((((uint32_t)CurrentState & (uint32_t)HAL_I2C_STATE_BUSY_RX) == (uint32_t)HAL_I2C_STATE_BUSY_RX) && (CurrentMode == HAL_I2C_MODE_SLAVE))) - { - /* Disable DMA Request */ - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - hi2c->XferCount = 0U; - - if (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Set state at HAL_I2C_STATE_LISTEN */ - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - hi2c->State = HAL_I2C_STATE_LISTEN; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else if (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Set state at HAL_I2C_STATE_LISTEN */ - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - hi2c->State = HAL_I2C_STATE_LISTEN; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Do nothing */ - } - - /* Enable EVT and ERR interrupt to treat end of transfer in IRQ handler */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - } - /* Check current Mode, in case of treatment DMA handler have been preempted by a prior interrupt */ - else if (hi2c->Mode != HAL_I2C_MODE_NONE) - { - if (hi2c->XferCount == (uint16_t)1) - { - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - } - - /* Disable EVT and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - /* Prepare next transfer or stop current transfer */ - if ((CurrentXferOptions == I2C_NO_OPTION_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_OTHER_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME)) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - } - - /* Disable Last DMA */ - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); - - /* Disable DMA Request */ - CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); - - hi2c->XferCount = 0U; - - /* Check if Errors has been detected during transfer */ - if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->State = HAL_I2C_STATE_READY; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->PreviousState = I2C_STATE_NONE; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemRxCpltCallback(hi2c); -#else - HAL_I2C_MemRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - } - else - { - /* Do nothing */ - } -} - -/** - * @brief DMA I2C communication error callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAError(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Clear Complete callback */ - if (hi2c->hdmatx != NULL) - { - hi2c->hdmatx->XferCpltCallback = NULL; - } - if (hi2c->hdmarx != NULL) - { - hi2c->hdmarx->XferCpltCallback = NULL; - } - - /* Ignore DMA FIFO error */ - if (HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - hi2c->XferCount = 0U; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA I2C communication abort callback - * (To be called at end of DMA Abort procedure). - * @param hdma DMA handle. - * @retval None - */ -static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) -{ - __IO uint32_t count = 0U; - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ - HAL_I2C_StateTypeDef CurrentState = hi2c->State; - - /* During abort treatment, check that there is no pending STOP request */ - /* Wait until STOP flag is reset */ - count = I2C_TIMEOUT_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - if (count == 0U) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - break; - } - count--; - } - while (READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP); - - /* Clear Complete callback */ - if (hi2c->hdmatx != NULL) - { - hi2c->hdmatx->XferCpltCallback = NULL; - } - if (hi2c->hdmarx != NULL) - { - hi2c->hdmarx->XferCpltCallback = NULL; - } - - /* Disable Acknowledge */ - CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - hi2c->XferCount = 0U; - - /* Reset XferAbortCallback */ - if (hi2c->hdmatx != NULL) - { - hi2c->hdmatx->XferAbortCallback = NULL; - } - if (hi2c->hdmarx != NULL) - { - hi2c->hdmarx->XferAbortCallback = NULL; - } - - /* Disable I2C peripheral to prevent dummy data in buffer */ - __HAL_I2C_DISABLE(hi2c); - - /* Check if come from abort from user */ - if (hi2c->State == HAL_I2C_STATE_ABORT) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AbortCpltCallback(hi2c); -#else - HAL_I2C_AbortCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - if (((uint32_t)CurrentState & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* Renable I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - - /* Enable Acknowledge */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); - - /* keep HAL_I2C_STATE_LISTEN */ - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_LISTEN; - } - else - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - } - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief This function handles I2C Communication Timeout. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param Flag specifies the I2C flag to check. - * @param Status The new Flag status (SET or RESET). - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart) -{ - /* Wait until flag is set */ - while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for Master addressing phase. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param Flag specifies the I2C flag to check. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) - { - /* Generate Stop */ - SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); - - /* Clear AF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of TXE flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of BTF flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of STOP request through Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnSTOPRequestThroughIT(I2C_HandleTypeDef *hi2c) -{ - __IO uint32_t count = 0U; - - /* Wait until STOP flag is reset */ - count = I2C_TIMEOUT_STOP_FLAG * (SystemCoreClock / 25U / 1000U); - do - { - count--; - if (count == 0U) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - return HAL_ERROR; - } - } - while (READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP); - - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) - { - /* Check if a STOPF is detected */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) - { - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles Acknowledge failed detection during an I2C Communication. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c) -{ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) - { - /* Clear NACKF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - return HAL_OK; -} - -/** - * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) -{ - /* if user set XferOptions to I2C_OTHER_FRAME */ - /* it request implicitly to generate a restart condition */ - /* set XferOptions to I2C_FIRST_FRAME */ - if (hi2c->XferOptions == I2C_OTHER_FRAME) - { - hi2c->XferOptions = I2C_FIRST_FRAME; - } - /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ - /* it request implicitly to generate a restart condition */ - /* then generate a stop condition at the end of transfer */ - /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ - else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) - { - hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; - } - else - { - /* Nothing to do */ - } -} - -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c deleted file mode 100644 index 64aabaa..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c +++ /dev/null @@ -1,182 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c_ex.c - * @author MCD Application Team - * @brief I2C Extension HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of I2C extension peripheral: - * + Extension features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### I2C peripheral extension features ##### - ============================================================================== - - [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/ - 429xx/439xx devices contains the following additional features : - - (+) Possibility to disable or enable Analog Noise Filter - (+) Use of a configured Digital Noise Filter - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure Noise Filter - (#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config() - (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config() - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup I2CEx I2CEx - * @brief I2C HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Functions I2C Exported Functions - * @{ - */ - - -/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions - * @brief Extension features functions - * -@verbatim - =============================================================================== - ##### Extension features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Noise Filters - -@endverbatim - * @{ - */ - -/** - * @brief Configures I2C Analog noise filter. - * @param hi2c pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param AnalogFilter new state of the Analog filter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Reset I2Cx ANOFF bit */ - hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF); - - /* Disable the analog filter */ - hi2c->Instance->FLTR |= AnalogFilter; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configures I2C Digital noise filter. - * @param hi2c pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param DigitalFilter Coefficient of digital noise filter between 0x00 and 0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) -{ - uint16_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Get the old register value */ - tmpreg = hi2c->Instance->FLTR; - - /* Reset I2Cx DNF bit [3:0] */ - tmpreg &= ~(I2C_FLTR_DNF); - - /* Set I2Cx DNF coefficient */ - tmpreg |= DigitalFilter; - - /* Store the new register value */ - hi2c->Instance->FLTR = tmpreg; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @} - */ - -/** - * @} - */ -#endif - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c deleted file mode 100644 index 700a0ca..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c +++ /dev/null @@ -1,2094 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2s.c - * @author MCD Application Team - * @brief I2S HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Integrated Interchip Sound (I2S) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and Errors functions - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - The I2S HAL driver can be used as follow: - - (#) Declare a I2S_HandleTypeDef handle structure. - (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API: - (##) Enable the SPIx interface clock. - (##) I2S pins configuration: - (+++) Enable the clock for the I2S GPIOs. - (+++) Configure these I2S pins as alternate function pull-up. - (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT() - and HAL_I2S_Receive_IT() APIs). - (+++) Configure the I2Sx interrupt priority. - (+++) Enable the NVIC I2S IRQ handle. - (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA() - and HAL_I2S_Receive_DMA() APIs: - (+++) Declare a DMA handle structure for the Tx/Rx Stream/Channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx Stream/Channel. - (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the - DMA Tx/Rx Stream/Channel. - - (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity - using HAL_I2S_Init() function. - - -@- The specific I2S interrupts (Transmission complete interrupt, - RXNE interrupt and Error Interrupts) will be managed using the macros - __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. - -@- Make sure that either: - (+@) I2S PLL clock is configured or - (+@) External clock source is configured after setting correctly - the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file. - - (#) Three mode of operations are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() - (+) Receive an amount of data in blocking mode using HAL_I2S_Receive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() - (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback - (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxCpltCallback - (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() - (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback - (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_RxCpltCallback - (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2S_ErrorCallback - - *** DMA mode IO operation *** - ============================== - [..] - (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() - (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback - (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxCpltCallback - (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() - (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback - (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_RxCpltCallback - (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2S_ErrorCallback - (+) Pause the DMA Transfer using HAL_I2S_DMAPause() - (+) Resume the DMA Transfer using HAL_I2S_DMAResume() - (+) Stop the DMA Transfer using HAL_I2S_DMAStop() - In Slave mode, if HAL_I2S_DMAStop is used to stop the communication, an error - HAL_I2S_ERROR_BUSY_LINE_RX is raised as the master continue to transmit data. - In this case __HAL_I2S_FLUSH_RX_DR macro must be used to flush the remaining data - inside DR register and avoid using DeInit/Init process for the next transfer. - - *** I2S HAL driver macros list *** - =================================== - [..] - Below the list of most used macros in I2S HAL driver. - - (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) - (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode) - (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts - (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts - (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not - (+) __HAL_I2S_FLUSH_RX_DR: Read DR Register to Flush RX Data - - [..] - (@) You can refer to the I2S HAL driver header file for more useful macros - - *** I2S HAL driver macros list *** - =================================== - [..] - Callback registration: - - (#) The compilation flag USE_HAL_I2S_REGISTER_CALLBACKS when set to 1U - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_I2S_RegisterCallback() to register an interrupt callback. - - Function HAL_I2S_RegisterCallback() allows to register following callbacks: - (++) TxCpltCallback : I2S Tx Completed callback - (++) RxCpltCallback : I2S Rx Completed callback - (++) TxRxCpltCallback : I2S TxRx Completed callback - (++) TxHalfCpltCallback : I2S Tx Half Completed callback - (++) RxHalfCpltCallback : I2S Rx Half Completed callback - (++) ErrorCallback : I2S Error callback - (++) MspInitCallback : I2S Msp Init callback - (++) MspDeInitCallback : I2S Msp DeInit callback - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - - (#) Use function HAL_I2S_UnRegisterCallback to reset a callback to the default - weak function. - HAL_I2S_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (++) TxCpltCallback : I2S Tx Completed callback - (++) RxCpltCallback : I2S Rx Completed callback - (++) TxRxCpltCallback : I2S TxRx Completed callback - (++) TxHalfCpltCallback : I2S Tx Half Completed callback - (++) RxHalfCpltCallback : I2S Rx Half Completed callback - (++) ErrorCallback : I2S Error callback - (++) MspInitCallback : I2S Msp Init callback - (++) MspDeInitCallback : I2S Msp DeInit callback - - [..] - By default, after the HAL_I2S_Init() and when the state is HAL_I2S_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_I2S_MasterTxCpltCallback(), HAL_I2S_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_I2S_Init()/ HAL_I2S_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_I2S_Init()/ HAL_I2S_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - - [..] - Callbacks can be registered/unregistered in HAL_I2S_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_I2S_STATE_READY or HAL_I2S_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_I2S_RegisterCallback() before calling HAL_I2S_DeInit() - or HAL_I2S_Init() function. - - [..] - When the compilation define USE_HAL_I2S_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -#ifdef HAL_I2S_MODULE_ENABLED - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup I2S I2S - * @brief I2S HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define I2S_TIMEOUT_FLAG 100U /*!< Timeout 100 ms */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup I2S_Private_Functions I2S Private Functions - * @{ - */ -static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); -static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); -static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void I2S_DMAError(DMA_HandleTypeDef *hdma); -static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); -static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s); -static void I2S_IRQHandler(I2S_HandleTypeDef *hi2s); -static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, - uint32_t Timeout); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup I2S_Exported_Functions I2S Exported Functions - * @{ - */ - -/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - de-initialize the I2Sx peripheral in simplex mode: - - (+) User must Implement HAL_I2S_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_I2S_Init() to configure the selected device with - the selected configuration: - (++) Mode - (++) Standard - (++) Data Format - (++) MCLK Output - (++) Audio frequency - (++) Polarity - (++) Full duplex mode - - (+) Call the function HAL_I2S_DeInit() to restore the default configuration - of the selected I2Sx peripheral. - @endverbatim - * @{ - */ - -/** - * @brief Initializes the I2S according to the specified parameters - * in the I2S_InitTypeDef and create the associated handle. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) -{ - uint32_t i2sdiv; - uint32_t i2sodd; - uint32_t packetlength; - uint32_t tmp; - uint32_t i2sclk; -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - uint16_t tmpreg; -#endif - - /* Check the I2S handle allocation */ - if (hi2s == NULL) - { - return HAL_ERROR; - } - - /* Check the I2S parameters */ - assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); - assert_param(IS_I2S_MODE(hi2s->Init.Mode)); - assert_param(IS_I2S_STANDARD(hi2s->Init.Standard)); - assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat)); - assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); - assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); - assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); - assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource)); - - if (hi2s->State == HAL_I2S_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hi2s->Lock = HAL_UNLOCKED; - - /* Initialize Default I2S IrqHandler ISR */ - hi2s->IrqHandlerISR = I2S_IRQHandler; - -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - /* Init the I2S Callback settings */ - hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ - hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - hi2s->TxRxCpltCallback = HAL_I2SEx_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - hi2s->TxRxHalfCpltCallback = HAL_I2SEx_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ - - if (hi2s->MspInitCallback == NULL) - { - hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - hi2s->MspInitCallback(hi2s); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - HAL_I2S_MspInit(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - - hi2s->State = HAL_I2S_STATE_BUSY; - - /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - CLEAR_BIT(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \ - SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ - SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD)); - hi2s->Instance->I2SPR = 0x0002U; - - /*----------------------- I2SPR: I2SDIV and ODD Calculation -----------------*/ - /* If the requested audio frequency is not the default, compute the prescaler */ - if (hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT) - { - /* Check the frame length (For the Prescaler computing) ********************/ - if (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) - { - /* Packet length is 16 bits */ - packetlength = 16U; - } - else - { - /* Packet length is 32 bits */ - packetlength = 32U; - } - - /* I2S standard */ - if (hi2s->Init.Standard <= I2S_STANDARD_LSB) - { - /* In I2S standard packet length is multiplied by 2 */ - packetlength = packetlength * 2U; - } - - /* Get the source clock value **********************************************/ -#if defined(I2S_APB1_APB2_FEATURE) - if (IS_I2S_APB1_INSTANCE(hi2s->Instance)) - { - i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S_APB1); - } - else - { - i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S_APB2); - } -#else - i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S); -#endif /* I2S_APB1_APB2_FEATURE */ - - /* Compute the Real divider depending on the MCLK output state, with a floating point */ - if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) - { - /* MCLK output is enabled */ - if (hi2s->Init.DataFormat != I2S_DATAFORMAT_16B) - { - tmp = (uint32_t)(((((i2sclk / (packetlength * 4U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); - } - else - { - tmp = (uint32_t)(((((i2sclk / (packetlength * 8U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); - } - } - else - { - /* MCLK output is disabled */ - tmp = (uint32_t)(((((i2sclk / packetlength) * 10U) / hi2s->Init.AudioFreq)) + 5U); - } - - /* Remove the flatting point */ - tmp = tmp / 10U; - - /* Check the parity of the divider */ - i2sodd = (uint32_t)(tmp & (uint32_t)1U); - - /* Compute the i2sdiv prescaler */ - i2sdiv = (uint32_t)((tmp - i2sodd) / 2U); - - /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ - i2sodd = (uint32_t)(i2sodd << 8U); - } - else - { - /* Set the default values */ - i2sdiv = 2U; - i2sodd = 0U; - } - - /* Test if the divider is 1 or 0 or greater than 0xFF */ - if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) - { - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_PRESCALER); - return HAL_ERROR; - } - - /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ - - /* Write to SPIx I2SPR register the computed value */ - hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput)); - - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - /* And configure the I2S with the I2S_InitStruct values */ - MODIFY_REG(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ - SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ - SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ - SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD), \ - (SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | \ - hi2s->Init.Standard | hi2s->Init.DataFormat | \ - hi2s->Init.CPOL)); - -#if defined(SPI_I2SCFGR_ASTRTEN) - if ((hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT) || ((hi2s->Init.Standard == I2S_STANDARD_PCM_LONG))) - { - /* Write to SPIx I2SCFGR */ - SET_BIT(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_ASTRTEN); - } -#endif /* SPI_I2SCFGR_ASTRTEN */ - -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - - /* Configure the I2S extended if the full duplex mode is enabled */ - assert_param(IS_I2S_FULLDUPLEX_MODE(hi2s->Init.FullDuplexMode)); - - if (hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE) - { - /* Set FullDuplex I2S IrqHandler ISR if FULLDUPLEXMODE is enabled */ - hi2s->IrqHandlerISR = HAL_I2SEx_FullDuplex_IRQHandler; - - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - CLEAR_BIT(I2SxEXT(hi2s->Instance)->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \ - SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ - SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD)); - I2SxEXT(hi2s->Instance)->I2SPR = 2U; - - /* Get the I2SCFGR register value */ - tmpreg = I2SxEXT(hi2s->Instance)->I2SCFGR; - - /* Get the mode to be configured for the extended I2S */ - if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) - { - tmp = I2S_MODE_SLAVE_RX; - } - else /* I2S_MODE_MASTER_RX || I2S_MODE_SLAVE_RX */ - { - tmp = I2S_MODE_SLAVE_TX; - } - - /* Configure the I2S Slave with the I2S Master parameter values */ - tmpreg |= (uint16_t)((uint16_t)SPI_I2SCFGR_I2SMOD | \ - (uint16_t)tmp | \ - (uint16_t)hi2s->Init.Standard | \ - (uint16_t)hi2s->Init.DataFormat | \ - (uint16_t)hi2s->Init.CPOL); - - /* Write to SPIx I2SCFGR */ - WRITE_REG(I2SxEXT(hi2s->Instance)->I2SCFGR, tmpreg); - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the I2S peripheral - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s) -{ - /* Check the I2S handle allocation */ - if (hi2s == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); - - hi2s->State = HAL_I2S_STATE_BUSY; - - /* Disable the I2S Peripheral Clock */ - __HAL_I2S_DISABLE(hi2s); - -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - if (hi2s->MspDeInitCallback == NULL) - { - hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - hi2s->MspDeInitCallback(hi2s); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - HAL_I2S_MspDeInit(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hi2s); - - return HAL_OK; -} - -/** - * @brief I2S MSP Init - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_MspInit could be implemented in the user file - */ -} - -/** - * @brief I2S MSP DeInit - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) -/** - * @brief Register a User I2S Callback - * To be used instead of the weak predefined callback - * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for the specified I2S. - * @param CallbackID ID of the callback to be registered - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, - pI2S_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2s->ErrorCode |= HAL_I2S_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2s); - - if (HAL_I2S_STATE_READY == hi2s->State) - { - switch (CallbackID) - { - case HAL_I2S_TX_COMPLETE_CB_ID : - hi2s->TxCpltCallback = pCallback; - break; - - case HAL_I2S_RX_COMPLETE_CB_ID : - hi2s->RxCpltCallback = pCallback; - break; - -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - case HAL_I2S_TX_RX_COMPLETE_CB_ID : - hi2s->TxRxCpltCallback = pCallback; - break; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - - case HAL_I2S_TX_HALF_COMPLETE_CB_ID : - hi2s->TxHalfCpltCallback = pCallback; - break; - - case HAL_I2S_RX_HALF_COMPLETE_CB_ID : - hi2s->RxHalfCpltCallback = pCallback; - break; - -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - case HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID : - hi2s->TxRxHalfCpltCallback = pCallback; - break; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - - case HAL_I2S_ERROR_CB_ID : - hi2s->ErrorCallback = pCallback; - break; - - case HAL_I2S_MSPINIT_CB_ID : - hi2s->MspInitCallback = pCallback; - break; - - case HAL_I2S_MSPDEINIT_CB_ID : - hi2s->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2S_STATE_RESET == hi2s->State) - { - switch (CallbackID) - { - case HAL_I2S_MSPINIT_CB_ID : - hi2s->MspInitCallback = pCallback; - break; - - case HAL_I2S_MSPDEINIT_CB_ID : - hi2s->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2s); - return status; -} - -/** - * @brief Unregister an I2S Callback - * I2S callback is redirected to the weak predefined callback - * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for the specified I2S. - * @param CallbackID ID of the callback to be unregistered - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2s); - - if (HAL_I2S_STATE_READY == hi2s->State) - { - switch (CallbackID) - { - case HAL_I2S_TX_COMPLETE_CB_ID : - hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_I2S_RX_COMPLETE_CB_ID : - hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - case HAL_I2S_TX_RX_COMPLETE_CB_ID : - hi2s->TxRxCpltCallback = HAL_I2SEx_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ - break; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - - case HAL_I2S_TX_HALF_COMPLETE_CB_ID : - hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - break; - - case HAL_I2S_RX_HALF_COMPLETE_CB_ID : - hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - break; - -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - case HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID : - hi2s->TxRxHalfCpltCallback = HAL_I2SEx_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ - break; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - - case HAL_I2S_ERROR_CB_ID : - hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_I2S_MSPINIT_CB_ID : - hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2S_MSPDEINIT_CB_ID : - hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2S_STATE_RESET == hi2s->State) - { - switch (CallbackID) - { - case HAL_I2S_MSPINIT_CB_ID : - hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2S_MSPDEINIT_CB_ID : - hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2s); - return status; -} -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup I2S_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2S data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2S_Transmit() - (++) HAL_I2S_Receive() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2S_Transmit_IT() - (++) HAL_I2S_Receive_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2S_Transmit_DMA() - (++) HAL_I2S_Receive_DMA() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_I2S_TxCpltCallback() - (++) HAL_I2S_RxCpltCallback() - (++) HAL_I2S_ErrorCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmit an amount of data in blocking mode - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 24-bit or 32-bit data length. - * @param Timeout Timeout duration - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_TX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pTxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - } - - tmpreg_cfgr = hi2s->Instance->I2SCFGR; - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Wait until TXE flag is set */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - while (hi2s->TxXferCount > 0U) - { - hi2s->Instance->DR = (*hi2s->pTxBuffPtr); - hi2s->pTxBuffPtr++; - hi2s->TxXferCount--; - - /* Wait until TXE flag is set */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - /* Check if an underrun occurs */ - if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) - { - /* Clear underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - } - } - - /* Check if Slave mode is selected */ - if (((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) - || ((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX)) - { - /* Wait until Busy flag is reset */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, Timeout) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - } - - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Receive an amount of data in blocking mode - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 24-bit or 32-bit data length. - * @param Timeout Timeout duration - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate - * in continuous way and as the I2S is not disabled at the end of the I2S transaction. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_RX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pRxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) - { - /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - } - - /* Receive data */ - while (hi2s->RxXferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; - hi2s->pRxBuffPtr++; - hi2s->RxXferCount--; - - /* Check if an overrun occurs */ - if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) - { - /* Clear overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - } - } - - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 24-bit or 32-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_TX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pTxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - } - - /* Enable TXE and ERR interrupt */ - __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Receive an amount of data in non-blocking mode with Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 24-bit or 32-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization - * between Master and Slave otherwise the I2S interrupt should be optimized. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_RX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pRxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - /* Enable RXNE and ERR interrupt */ - __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with DMA - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to the Transmit data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 24-bit or 32-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_TX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pTxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - } - - /* Set the I2S Tx DMA Half transfer complete callback */ - hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; - - /* Set the I2S Tx DMA transfer complete callback */ - hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; - - /* Set the DMA error callback */ - hi2s->hdmatx->XferErrorCallback = I2S_DMAError; - - /* Enable the Tx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmatx, - (uint32_t)hi2s->pTxBuffPtr, - (uint32_t)&hi2s->Instance->DR, - hi2s->TxXferSize)) - { - /* Update SPI error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - hi2s->State = HAL_I2S_STATE_READY; - - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - /* Check if the I2S is already enabled */ - if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Check if the I2S Tx request is already enabled */ - if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_TXDMAEN)) - { - /* Enable Tx DMA Request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - } - - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Receive an amount of data in non-blocking mode with DMA - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 24-bit or 32-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_RX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pRxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - /* Set the I2S Rx DMA Half transfer complete callback */ - hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; - - /* Set the I2S Rx DMA transfer complete callback */ - hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; - - /* Set the DMA error callback */ - hi2s->hdmarx->XferErrorCallback = I2S_DMAError; - - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) - { - /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - } - - /* Enable the Rx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, (uint32_t)hi2s->pRxBuffPtr, - hi2s->RxXferSize)) - { - /* Update SPI error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - hi2s->State = HAL_I2S_STATE_READY; - - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - /* Check if the I2S is already enabled */ - if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Check if the I2S Rx request is already enabled */ - if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_RXDMAEN)) - { - /* Enable Rx DMA Request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - } - - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Pauses the audio DMA Stream/Channel playing from the Media. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) -{ - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX) - { - /* Disable the I2S DMA Tx request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - } - else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) - { - /* Disable the I2S DMA Rx request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - } -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - else if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) - { - /* Pause the audio file playing by disabling the I2S DMA request */ - CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - else - { - /* nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_OK; -} - -/** - * @brief Resumes the audio DMA Stream/Channel playing from the Media. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) -{ - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX) - { - /* Enable the I2S DMA Tx request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - } - else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) - { - /* Enable the I2S DMA Rx request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - } -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - else if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) - { - /* Pause the audio file playing by disabling the I2S DMA request */ - SET_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - SET_BIT(I2SxEXT(hi2s->Instance)->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - - /* If the I2Sext peripheral is still not enabled, enable it */ - if ((I2SxEXT(hi2s->Instance)->I2SCFGR & SPI_I2SCFGR_I2SE) == 0U) - { - /* Enable I2Sext peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - } - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - else - { - /* nothing to do */ - } - - /* If the I2S peripheral is still not enabled, enable it */ - if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_OK; -} - -/** - * @brief Stops the audio DMA Stream/Channel playing from the Media. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) -{ -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - uint32_t tickstart; -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - HAL_StatusTypeDef errorcode = HAL_OK; - /* The Lock is not implemented on this API to allow the user application - to call the HAL SPI API under callbacks HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() - when calling HAL_DMA_Abort() API the DMA TX or RX Transfer complete interrupt is generated - and the correspond call back is executed HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() - */ - - if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) - { - /* Abort the I2S DMA tx Stream/Channel */ - if (hi2s->hdmatx != NULL) - { - /* Disable the I2S DMA tx Stream/Channel */ - if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) - { - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - /* Wait until TXE flag is set */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, I2S_TIMEOUT_FLAG) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - - /* Wait until BSY flag is Reset */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, I2S_TIMEOUT_FLAG) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - - /* Disable I2S peripheral */ - __HAL_I2S_DISABLE(hi2s); - - /* Clear UDR flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Disable the I2S Tx DMA requests */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) - { - /* Abort the I2S DMA rx Stream/Channel */ - if (hi2s->hdmarx != NULL) - { - /* Disable the I2S DMA rx Stream/Channel */ - if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) - { - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - /* Disable I2Sext peripheral */ - __HAL_I2SEXT_DISABLE(hi2s); - - /* Clear OVR flag */ - __HAL_I2SEXT_CLEAR_OVRFLAG(hi2s); - - /* Disable the I2SxEXT DMA request */ - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_RXDMAEN); - - if (hi2s->Init.Mode == I2S_MODE_SLAVE_TX) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_BUSY_LINE_RX); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - else - { - /* Read DR to Flush RX Data */ - READ_REG(I2SxEXT(hi2s->Instance)->DR); - } - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - } - - else if ((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX)) - { - /* Abort the I2S DMA rx Stream/Channel */ - if (hi2s->hdmarx != NULL) - { - /* Disable the I2S DMA rx Stream/Channel */ - if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) - { - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - errorcode = HAL_ERROR; - } - } -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) - { - /* Abort the I2S DMA tx Stream/Channel */ - if (hi2s->hdmatx != NULL) - { - /* Disable the I2S DMA tx Stream/Channel */ - if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) - { - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - tickstart = HAL_GetTick(); - - /* Wait until TXE flag is set */ - while (__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_TXE) != SET) - { - if (((HAL_GetTick() - tickstart) > I2S_TIMEOUT_FLAG)) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - } - - /* Wait until BSY flag is Reset */ - while (__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_BSY) != RESET) - { - if (((HAL_GetTick() - tickstart) > I2S_TIMEOUT_FLAG)) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - } - - /* Disable I2Sext peripheral */ - __HAL_I2SEXT_DISABLE(hi2s); - - /* Clear UDR flag */ - __HAL_I2SEXT_CLEAR_UDRFLAG(hi2s); - - /* Disable the I2SxEXT DMA request */ - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_TXDMAEN); - } -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - - /* Disable I2S peripheral */ - __HAL_I2S_DISABLE(hi2s); - - /* Clear OVR flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Disable the I2S Rx DMA request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - - if (hi2s->Init.Mode == I2S_MODE_SLAVE_RX) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_BUSY_LINE_RX); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - errorcode = HAL_ERROR; - } - else - { - /* Read DR to Flush RX Data */ - READ_REG((hi2s->Instance)->DR); - } - } - - hi2s->State = HAL_I2S_STATE_READY; - - return errorcode; -} - -/** - * @brief This function handles I2S interrupt request. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) -{ - /* Call the IrqHandler ISR set during HAL_I2S_INIT */ - hi2s->IrqHandlerISR(hi2s); -} - -/** - * @brief Tx Transfer Half completed callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_TxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx Transfer completed callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer half completed callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_RxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief I2S error callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the I2S state - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL state - */ -HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s) -{ - return hi2s->State; -} - -/** - * @brief Return the I2S error code - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval I2S Error Code - */ -uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s) -{ - return hi2s->ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup I2S_Private_Functions I2S Private Functions - * @{ - */ -/** - * @brief DMA I2S transmit process complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* if DMA is configured in DMA_NORMAL Mode */ - if (hdma->Init.Mode == DMA_NORMAL) - { - /* Disable Tx DMA Request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - - hi2s->TxXferCount = 0U; - hi2s->State = HAL_I2S_STATE_READY; - } - /* Call user Tx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxCpltCallback(hi2s); -#else - HAL_I2S_TxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S transmit process half complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user Tx half complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxHalfCpltCallback(hi2s); -#else - HAL_I2S_TxHalfCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S receive process complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* if DMA is configured in DMA_NORMAL Mode */ - if (hdma->Init.Mode == DMA_NORMAL) - { - /* Disable Rx DMA Request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - hi2s->RxXferCount = 0U; - hi2s->State = HAL_I2S_STATE_READY; - } - /* Call user Rx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->RxCpltCallback(hi2s); -#else - HAL_I2S_RxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S receive process half complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user Rx half complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->RxHalfCpltCallback(hi2s); -#else - HAL_I2S_RxHalfCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S communication error callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMAError(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable Rx and Tx DMA Request */ - CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - hi2s->TxXferCount = 0U; - hi2s->RxXferCount = 0U; - - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief Transmit an amount of data in non-blocking mode with Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s) -{ - /* Transmit data */ - hi2s->Instance->DR = (*hi2s->pTxBuffPtr); - hi2s->pTxBuffPtr++; - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - hi2s->State = HAL_I2S_STATE_READY; - /* Call user Tx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxCpltCallback(hi2s); -#else - HAL_I2S_TxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Receive an amount of data in non-blocking mode with Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s) -{ - /* Receive data */ - (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; - hi2s->pRxBuffPtr++; - hi2s->RxXferCount--; - - if (hi2s->RxXferCount == 0U) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - hi2s->State = HAL_I2S_STATE_READY; - /* Call user Rx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->RxCpltCallback(hi2s); -#else - HAL_I2S_RxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } -} - -/** - * @brief This function handles I2S interrupt request. - * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -static void I2S_IRQHandler(I2S_HandleTypeDef *hi2s) -{ - __IO uint32_t i2ssr = hi2s->Instance->SR; - - if (hi2s->State == HAL_I2S_STATE_BUSY_RX) - { - /* I2S in mode Receiver ------------------------------------------------*/ - if (((i2ssr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE) != RESET)) - { - I2S_Receive_IT(hi2s); - } - - /* I2S Overrun error interrupt occurred -------------------------------------*/ - if (((i2ssr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET)) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Clear Overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX) - { - /* I2S in mode Transmitter -----------------------------------------------*/ - if (((i2ssr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE) != RESET)) - { - I2S_Transmit_IT(hi2s); - } - - /* I2S Underrun error interrupt occurred --------------------------------*/ - if (((i2ssr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET)) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Clear Underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief This function handles I2S Communication Timeout. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param Flag Flag checked - * @param State Value of the flag expected - * @param Timeout Duration of the timeout - * @retval HAL status - */ -static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, - uint32_t Timeout) -{ - uint32_t tickstart; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until flag is set to status*/ - while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) - { - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_I2S_MODULE_ENABLED */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c deleted file mode 100644 index 643bf74..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c +++ /dev/null @@ -1,1135 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2s_ex.c - * @author MCD Application Team - * @brief I2S HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of I2S extension peripheral: - * + Extension features Functions - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### I2S Extension features ##### - ============================================================================== - [..] - (#) In I2S full duplex mode, each SPI peripheral is able to manage sending and receiving - data simultaneously using two data lines. Each SPI peripheral has an extended block - called I2Sxext (i.e I2S2ext for SPI2 and I2S3ext for SPI3). - (#) The extension block is not a full SPI IP, it is used only as I2S slave to - implement full duplex mode. The extension block uses the same clock sources - as its master. - - (#) Both I2Sx and I2Sx_ext can be configured as transmitters or receivers. - - [..] - (@) Only I2Sx can deliver SCK and WS to I2Sx_ext in full duplex mode, where - I2Sx can be I2S2 or I2S3. - - ##### How to use this driver ##### - =============================================================================== - [..] - Three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send and receive in the same time an amount of data in blocking mode using HAL_I2SEx_TransmitReceive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send and receive in the same time an amount of data in non blocking mode using HAL_I2SEx_TransmitReceive_IT() - (+) At transmission/reception end of transfer HAL_I2SEx_TxRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2SEx_TxRxCpltCallback - (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2S_ErrorCallback - - *** DMA mode IO operation *** - ============================== - [..] - (+) Send and receive an amount of data in non blocking mode (DMA) using HAL_I2SEx_TransmitReceive_DMA() - (+) At transmission/reception end of transfer HAL_I2SEx_TxRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxRxCpltCallback - (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2S_ErrorCallback - (+) __HAL_I2SEXT_FLUSH_RX_DR: In Full-Duplex Slave mode, if HAL_I2S_DMAStop is used to stop the - communication, an error HAL_I2S_ERROR_BUSY_LINE_RX is raised as the master continue to transmit data. - In this case __HAL_I2SEXT_FLUSH_RX_DR macro must be used to flush the remaining data - inside I2Sx and I2Sx_ext DR registers and avoid using DeInit/Init process for the next transfer. - @endverbatim - - Additional Figure: The Extended block uses the same clock sources as its master. - - +-----------------------+ - I2Sx_SCK | | - ----------+-->| I2Sx |------------------->I2Sx_SD(in/out) - +--|-->| | - | | +-----------------------+ - | | - I2S_WS | | - ------>| | - | | +-----------------------+ - | +-->| | - | | I2Sx_ext |------------------->I2Sx_extSD(in/out) - +----->| | - +-----------------------+ - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#ifdef HAL_I2S_MODULE_ENABLED - -/** @defgroup I2SEx I2SEx - * @brief I2S Extended HAL module driver - * @{ - */ - -#if defined (SPI_I2S_FULLDUPLEX_SUPPORT) - -/* Private typedef -----------------------------------------------------------*/ -/** @defgroup I2SEx_Private_Typedef I2S Extended Private Typedef - * @{ - */ -typedef enum -{ - I2S_USE_I2S = 0x00U, /*!< I2Sx should be used */ - I2S_USE_I2SEXT = 0x01U, /*!< I2Sx_ext should be used */ -} I2S_UseTypeDef; -/** - * @} - */ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup I2SEx_Private_Functions I2S Extended Private Functions - * @{ - */ -static void I2SEx_TxRxDMAHalfCplt(DMA_HandleTypeDef *hdma); -static void I2SEx_TxRxDMACplt(DMA_HandleTypeDef *hdma); -static void I2SEx_TxRxDMAError(DMA_HandleTypeDef *hdma); -static void I2SEx_RxISR_I2S(I2S_HandleTypeDef *hi2s); -static void I2SEx_RxISR_I2SExt(I2S_HandleTypeDef *hi2s); -static void I2SEx_TxISR_I2S(I2S_HandleTypeDef *hi2s); -static void I2SEx_TxISR_I2SExt(I2S_HandleTypeDef *hi2s); -static HAL_StatusTypeDef I2SEx_FullDuplexWaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, - uint32_t Flag, - uint32_t State, - uint32_t Timeout, - I2S_UseTypeDef i2sUsed); -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup I2SEx I2SEx - * @{ - */ - -/** @addtogroup I2SEx_Exported_Functions I2S Extended Exported Functions - * @{ - */ - -/** @defgroup I2SEx_Exported_Functions_Group1 I2S Extended IO operation functions - * @brief I2SEx IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2S data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2SEx_TransmitReceive() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2SEx_TransmitReceive_IT() - (++) HAL_I2SEx_FullDuplex_IRQHandler() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2SEx_TransmitReceive_DMA() - - (#) A set of Transfer Complete Callback are provided in non Blocking mode: - (++) HAL_I2SEx_TxRxCpltCallback() -@endverbatim - * @{ - */ -/** - * @brief Full-Duplex Transmit/Receive data in blocking mode. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pTxData a 16-bit pointer to the Transmit data buffer. - * @param pRxData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @param Timeout Timeout duration - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, - uint16_t *pTxData, - uint16_t *pRxData, - uint16_t Size, - uint32_t Timeout) -{ - uint32_t tmp1 = 0U; - HAL_StatusTypeDef errorcode = HAL_OK; - - if (hi2s->State != HAL_I2S_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended - is selected during the I2S configuration phase, the Size parameter means the number - of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data - frame is selected the Size parameter means the number of 16-bit data length. */ - if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - /* Set state and reset error code */ - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; - - tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; - /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ - if ((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX)) - { - /* Prepare the First Data before enabling the I2S */ - hi2s->Instance->DR = (*pTxData++); - hi2s->TxXferCount--; - - /* Enable I2Sext(receiver) before enabling I2Sx peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - - /* Enable I2Sx peripheral */ - __HAL_I2S_ENABLE(hi2s); - - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) - { - /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2SEXT_CLEAR_OVRFLAG(hi2s); - } - - while ((hi2s->RxXferCount > 0U) || (hi2s->TxXferCount > 0U)) - { - if (hi2s->TxXferCount > 0U) - { - /* Wait until TXE flag is set */ - if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout, I2S_USE_I2S) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - errorcode = HAL_ERROR; - goto error; - } - /* Write Data on DR register */ - hi2s->Instance->DR = (*pTxData++); - hi2s->TxXferCount--; - - /* Check if an underrun occurs */ - if ((__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) && (tmp1 == I2S_MODE_SLAVE_TX)) - { - /* Clear Underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - } - } - if (hi2s->RxXferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout, I2S_USE_I2SEXT) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - errorcode = HAL_ERROR; - goto error; - } - /* Read Data from DR register */ - (*pRxData++) = I2SxEXT(hi2s->Instance)->DR; - hi2s->RxXferCount--; - - /* Check if an overrun occurs */ - if (__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) - { - /* Clear Overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - } - } - } - } - /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ - else - { - /* Prepare the First Data before enabling the I2S */ - I2SxEXT(hi2s->Instance)->DR = (*pTxData++); - hi2s->TxXferCount--; - - /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - - /* Enable I2S peripheral before the I2Sext*/ - __HAL_I2S_ENABLE(hi2s); - - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) - { - /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - } - - while ((hi2s->RxXferCount > 0U) || (hi2s->TxXferCount > 0U)) - { - if (hi2s->TxXferCount > 0U) - { - /* Wait until TXE flag is set */ - if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout, I2S_USE_I2SEXT) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - errorcode = HAL_ERROR; - goto error; - } - /* Write Data on DR register */ - I2SxEXT(hi2s->Instance)->DR = (*pTxData++); - hi2s->TxXferCount--; - - /* Check if an underrun occurs */ - if ((__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) && (tmp1 == I2S_MODE_SLAVE_RX)) - { - /* Clear Underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - } - } - if (hi2s->RxXferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout, I2S_USE_I2S) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - errorcode = HAL_ERROR; - goto error; - } - /* Read Data from DR register */ - (*pRxData++) = hi2s->Instance->DR; - hi2s->RxXferCount--; - - /* Check if an overrun occurs */ - if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) - { - /* Clear Overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - } - } - } - } - - if (hi2s->ErrorCode != HAL_I2S_ERROR_NONE) - { - errorcode = HAL_ERROR; - } - -error : - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return errorcode; -} - -/** - * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pTxData a 16-bit pointer to the Transmit data buffer. - * @param pRxData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, - uint16_t *pTxData, - uint16_t *pRxData, - uint16_t Size) -{ - uint32_t tmp1 = 0U; - HAL_StatusTypeDef errorcode = HAL_OK; - - if (hi2s->State != HAL_I2S_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - hi2s->pTxBuffPtr = pTxData; - hi2s->pRxBuffPtr = pRxData; - - tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended - is selected during the I2S configuration phase, the Size parameter means the number - of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data - frame is selected the Size parameter means the number of 16-bit data length. */ - if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; - - /* Set the function for IT treatment */ - if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) - { - /* Enable I2Sext RXNE and ERR interrupts */ - __HAL_I2SEXT_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Enable I2Sx TXE and ERR interrupts */ - __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Transmit First data */ - hi2s->Instance->DR = (*hi2s->pTxBuffPtr++); - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - } - } - else /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ - { - /* Enable I2Sext TXE and ERR interrupts */ - __HAL_I2SEXT_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Enable I2Sext RXNE and ERR interrupts */ - __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Transmit First data */ - I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++); - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable I2Sext TXE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - } - } - - /* Enable I2Sext peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - -error : - __HAL_UNLOCK(hi2s); - return errorcode; -} - -/** - * @brief Full-Duplex Transmit/Receive data in non-blocking mode using DMA - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pTxData a 16-bit pointer to the Transmit data buffer. - * @param pRxData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, - uint16_t *pTxData, - uint16_t *pRxData, - uint16_t Size) -{ - uint32_t *tmp = NULL; - uint32_t tmp1 = 0U; - HAL_StatusTypeDef errorcode = HAL_OK; - - if (hi2s->State != HAL_I2S_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - hi2s->pTxBuffPtr = pTxData; - hi2s->pRxBuffPtr = pRxData; - - tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended - is selected during the I2S configuration phase, the Size parameter means the number - of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data - frame is selected the Size parameter means the number of 16-bit data length. */ - if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; - - /* Set the I2S Rx DMA Half transfer complete callback */ - hi2s->hdmarx->XferHalfCpltCallback = I2SEx_TxRxDMAHalfCplt; - - /* Set the I2S Rx DMA transfer complete callback */ - hi2s->hdmarx->XferCpltCallback = I2SEx_TxRxDMACplt; - - /* Set the I2S Rx DMA error callback */ - hi2s->hdmarx->XferErrorCallback = I2SEx_TxRxDMAError; - - /* Set the I2S Tx DMA Half transfer complete callback as NULL */ - hi2s->hdmatx->XferHalfCpltCallback = NULL; - - /* Set the I2S Tx DMA transfer complete callback as NULL */ - hi2s->hdmatx->XferCpltCallback = NULL; - - /* Set the I2S Tx DMA error callback */ - hi2s->hdmatx->XferErrorCallback = I2SEx_TxRxDMAError; - - tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; - /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ - if ((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX)) - { - /* Enable the Rx DMA Stream */ - tmp = (uint32_t *)&pRxData; - HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, *(uint32_t *)tmp, hi2s->RxXferSize); - - /* Enable Rx DMA Request */ - SET_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_RXDMAEN); - - /* Enable the Tx DMA Stream */ - tmp = (uint32_t *)&pTxData; - HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t *)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize); - - /* Enable Tx DMA Request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2Sext(receiver) before enabling I2Sx peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - - /* Enable I2S peripheral after the I2Sext */ - __HAL_I2S_ENABLE(hi2s); - } - } - else - { - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) - { - /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - } - /* Enable the Tx DMA Stream */ - tmp = (uint32_t *)&pTxData; - HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t *)tmp, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, hi2s->TxXferSize); - - /* Enable Tx DMA Request */ - SET_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_TXDMAEN); - - /* Enable the Rx DMA Stream */ - tmp = (uint32_t *)&pRxData; - HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t *)tmp, hi2s->RxXferSize); - - /* Enable Rx DMA Request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2Sext(transmitter) before enabling I2Sx peripheral */ - __HAL_I2SEXT_ENABLE(hi2s); - /* Enable I2S peripheral before the I2Sext */ - __HAL_I2S_ENABLE(hi2s); - } - } - -error : - __HAL_UNLOCK(hi2s); - return errorcode; -} - -/** - * @brief This function handles I2S/I2Sext interrupt requests in full-duplex mode. - * @param hi2s I2S handle - * @retval HAL status - */ -void HAL_I2SEx_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s) -{ - __IO uint32_t i2ssr = hi2s->Instance->SR; - __IO uint32_t i2sextsr = I2SxEXT(hi2s->Instance)->SR; - __IO uint32_t i2scr2 = hi2s->Instance->CR2; - __IO uint32_t i2sextcr2 = I2SxEXT(hi2s->Instance)->CR2; - - /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ - if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) - { - /* I2S in mode Transmitter -------------------------------------------------*/ - if (((i2ssr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && ((i2scr2 & I2S_IT_TXE) != RESET)) - { - /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX, - the I2S TXE interrupt will be generated to manage the full-duplex transmit phase. */ - I2SEx_TxISR_I2S(hi2s); - } - - /* I2Sext in mode Receiver -----------------------------------------------*/ - if (((i2sextsr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && ((i2sextcr2 & I2S_IT_RXNE) != RESET)) - { - /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX, - the I2Sext RXNE interrupt will be generated to manage the full-duplex receive phase. */ - I2SEx_RxISR_I2SExt(hi2s); - } - - /* I2Sext Overrun error interrupt occurred --------------------------------*/ - if (((i2sextsr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && ((i2sextcr2 & I2S_IT_ERR) != RESET)) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Clear Overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - - /* I2S Underrun error interrupt occurred ----------------------------------*/ - if (((i2ssr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && ((i2scr2 & I2S_IT_ERR) != RESET)) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Disable RXNE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Clear underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } - /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ - else - { - /* I2Sext in mode Transmitter ----------------------------------------------*/ - if (((i2sextsr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && ((i2sextcr2 & I2S_IT_TXE) != RESET)) - { - /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX, - the I2Sext TXE interrupt will be generated to manage the full-duplex transmit phase. */ - I2SEx_TxISR_I2SExt(hi2s); - } - - /* I2S in mode Receiver --------------------------------------------------*/ - if (((i2ssr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && ((i2scr2 & I2S_IT_RXNE) != RESET)) - { - /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX, - the I2S RXNE interrupt will be generated to manage the full-duplex receive phase. */ - I2SEx_RxISR_I2S(hi2s); - } - - /* I2S Overrun error interrupt occurred -------------------------------------*/ - if (((i2ssr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && ((i2scr2 & I2S_IT_ERR) != RESET)) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Disable TXE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - - /* I2Sext Underrun error interrupt occurred -------------------------------*/ - if (((i2sextsr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && ((i2sextcr2 & I2S_IT_ERR) != RESET)) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief Tx and Rx Transfer half completed callback - * @param hi2s I2S handle - * @retval None - */ -__weak void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2SEx_TxRxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx and Rx Transfer completed callback - * @param hi2s I2S handle - * @retval None - */ -__weak void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2SEx_TxRxCpltCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup I2SEx_Private_Functions I2S Extended Private Functions - * @{ - */ - -/** - * @brief DMA I2S transmit receive process half complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2SEx_TxRxDMAHalfCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Call user TxRx Half complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxHalfCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxHalfCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S transmit receive process complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2SEx_TxRxDMACplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* If DMA is configured in DMA_NORMAL mode */ - if (hdma->Init.Mode == DMA_NORMAL) - { - if (((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) || \ - ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX)) - /* Disable Tx & Rx DMA Requests */ - { - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_RXDMAEN); - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - } - else - { - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_TXDMAEN); - } - - hi2s->RxXferCount = 0U; - hi2s->TxXferCount = 0U; - - hi2s->State = HAL_I2S_STATE_READY; - } - - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S communication error callback - * @param hdma DMA handle - * @retval None - */ -static void I2SEx_TxRxDMAError(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Disable Rx and Tx DMA Request */ - CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - - hi2s->TxXferCount = 0U; - hi2s->RxXferCount = 0U; - - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief I2S Full-Duplex IT handler transmit function - * @param hi2s I2S handle - * @retval None - */ -static void I2SEx_TxISR_I2S(I2S_HandleTypeDef *hi2s) -{ - /* Write Data on DR register */ - hi2s->Instance->DR = (*hi2s->pTxBuffPtr++); - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - if (hi2s->RxXferCount == 0U) - { - hi2s->State = HAL_I2S_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief I2SExt Full-Duplex IT handler transmit function - * @param hi2s I2S handle - * @retval None - */ -static void I2SEx_TxISR_I2SExt(I2S_HandleTypeDef *hi2s) -{ - /* Write Data on DR register */ - I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++); - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable I2Sext TXE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - if (hi2s->RxXferCount == 0U) - { - hi2s->State = HAL_I2S_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief I2S Full-Duplex IT handler receive function - * @param hi2s I2S handle - * @retval None - */ -static void I2SEx_RxISR_I2S(I2S_HandleTypeDef *hi2s) -{ - /* Read Data from DR register */ - (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR; - hi2s->RxXferCount--; - - if (hi2s->RxXferCount == 0U) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - if (hi2s->TxXferCount == 0U) - { - hi2s->State = HAL_I2S_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief I2SExt Full-Duplex IT handler receive function - * @param hi2s I2S handle - * @retval None - */ -static void I2SEx_RxISR_I2SExt(I2S_HandleTypeDef *hi2s) -{ - /* Read Data from DR register */ - (*hi2s->pRxBuffPtr++) = I2SxEXT(hi2s->Instance)->DR; - hi2s->RxXferCount--; - - if (hi2s->RxXferCount == 0U) - { - /* Disable I2Sext RXNE and ERR interrupt */ - __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - if (hi2s->TxXferCount == 0U) - { - hi2s->State = HAL_I2S_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxRxCpltCallback(hi2s); -#else - HAL_I2SEx_TxRxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief This function handles I2S Communication Timeout. - * @param hi2s I2S handle - * @param Flag Flag checked - * @param State Value of the flag expected - * @param Timeout Duration of the timeout - * @param i2sUsed I2S instance reference - * @retval HAL status - */ -static HAL_StatusTypeDef I2SEx_FullDuplexWaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, - uint32_t Flag, - uint32_t State, - uint32_t Timeout, - I2S_UseTypeDef i2sUsed) -{ - uint32_t tickstart = HAL_GetTick(); - - if (i2sUsed == I2S_USE_I2S) - { - /* Wait until flag is reset */ - while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_TIMEOUT; - } - } - } - } - else /* i2sUsed == I2S_USE_I2SEXT */ - { - /* Wait until flag is reset */ - while (((__HAL_I2SEXT_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - -/** - * @} - */ -#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */ - -/** - * @} - */ -#endif /* HAL_I2S_MODULE_ENABLED */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c deleted file mode 100644 index b4bb483..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c +++ /dev/null @@ -1,571 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr.c - * @author MCD Application Team - * @brief PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Power Controller (PWR) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup PWR PWR - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup PWR_Private_Constants - * @{ - */ - -/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask - * @{ - */ -#define PVD_MODE_IT 0x00010000U -#define PVD_MODE_EVT 0x00020000U -#define PVD_RISING_EDGE 0x00000001U -#define PVD_FALLING_EDGE 0x00000002U -/** - * @} - */ - -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - After reset, the backup domain (RTC registers, RTC backup data - registers and backup SRAM) is protected against possible unwanted - write accesses. - To enable access to the RTC Domain and RTC registers, proceed as follows: - (+) Enable the Power Controller (PWR) APB1 interface clock using the - __HAL_RCC_PWR_CLK_ENABLE() macro. - (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the HAL PWR peripheral registers to their default reset values. - * @retval None - */ -void HAL_PWR_DeInit(void) -{ - __HAL_RCC_PWR_FORCE_RESET(); - __HAL_RCC_PWR_RELEASE_RESET(); -} - -/** - * @brief Enables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @note The following sequence is required to bypass the delay between - * DBP bit programming and the effective enabling of the backup domain. - * Please check the Errata Sheet for more details under "Possible delay - * in backup domain protection disabling/enabling after programming the - * DBP bit" section. - * @retval None - */ -void HAL_PWR_EnableBkUpAccess(void) -{ - __IO uint32_t dummyread; - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; - dummyread = PWR->CR; - UNUSED(dummyread); -} - -/** - * @brief Disables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @note The following sequence is required to bypass the delay between - * DBP bit programming and the effective disabling of the backup domain. - * Please check the Errata Sheet for more details under "Possible delay - * in backup domain protection disabling/enabling after programming the - * DBP bit" section. - * @retval None - */ -void HAL_PWR_DisableBkUpAccess(void) -{ - __IO uint32_t dummyread; - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; - dummyread = PWR->CR; - UNUSED(dummyread); -} - -/** - * @} - */ - -/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @brief Low Power modes configuration functions - * -@verbatim - - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - - *** PVD configuration *** - ========================= - [..] - (+) The PVD is used to monitor the VDD power supply by comparing it to a - threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). - (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower - than the PVD threshold. This event is internally connected to the EXTI - line16 and can generate an interrupt if enabled. This is done through - __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. - (+) The PVD is stopped in Standby mode. - - *** Wake-up pin configuration *** - ================================ - [..] - (+) Wake-up pin is used to wake up the system from Standby mode. This pin is - forced in input pull-down configuration and is active on rising edges. - (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00. - (++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13 - (++) For STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01 - - *** Low Power modes configuration *** - ===================================== - [..] - The devices feature 3 low-power modes: - (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running. - (+) Stop mode: all clocks are stopped, regulator running, regulator - in low power mode - (+) Standby mode: 1.2V domain powered off. - - *** Sleep mode *** - ================== - [..] - (+) Entry: - The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI) - functions with - (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - - -@@- The Regulator parameter is not used for the STM32F4 family - and is kept as parameter just to maintain compatibility with the - lower power families (STM32L). - (+) Exit: - Any peripheral interrupt acknowledged by the nested vectored interrupt - controller (NVIC) can wake up the device from Sleep mode. - - *** Stop mode *** - ================= - [..] - In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI, - and the HSE RC oscillators are disabled. Internal SRAM and register contents - are preserved. - The voltage regulator can be configured either in normal or low-power mode. - To minimize the consumption In Stop mode, FLASH can be powered off before - entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function. - It can be switched on again by software after exiting the Stop mode using - the HAL_PWREx_DisableFlashPowerDown() function. - - (+) Entry: - The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON) - function with: - (++) Main regulator ON. - (++) Low Power regulator ON. - (+) Exit: - Any EXTI Line (Internal or External) configured in Interrupt/Event mode. - - *** Standby mode *** - ==================== - [..] - (+) - The Standby mode allows to achieve the lowest power consumption. It is based - on the Cortex-M4 deep sleep mode, with the voltage regulator disabled. - The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and - the HSE oscillator are also switched off. SRAM and register contents are lost - except for the RTC registers, RTC backup registers, backup SRAM and Standby - circuitry. - - The voltage regulator is OFF. - - (++) Entry: - (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. - (++) Exit: - (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up, - tamper event, time-stamp event, external reset in NRST pin, IWDG reset. - - *** Auto-wake-up (AWU) from low-power mode *** - ============================================= - [..] - - (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC - Wake-up event, a tamper event or a time-stamp event, without depending on - an external interrupt (Auto-wake-up mode). - - (+) RTC auto-wake-up (AWU) from the Stop and Standby modes - - (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to - configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. - - (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it - is necessary to configure the RTC to detect the tamper or time stamp event using the - HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions. - - (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to - configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). - * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration - * information for the PVD. - * @note Refer to the electrical characteristics of your device datasheet for - * more details about the voltage threshold corresponding to each - * detection level. - * @retval None - */ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) -{ - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); - assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); - - /* Set PLS[7:5] bits according to PVDLevel value */ - MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); - - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVD_EXTI_DISABLE_IT(); - __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) - { - __HAL_PWR_PVD_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) - { - __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - } -} - -/** - * @brief Enables the Power Voltage Detector(PVD). - * @retval None - */ -void HAL_PWR_EnablePVD(void) -{ - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Power Voltage Detector(PVD). - * @retval None - */ -void HAL_PWR_DisablePVD(void) -{ - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE; -} - -/** - * @brief Enables the Wake-up PINx functionality. - * @param WakeUpPinx Specifies the Power Wake-Up pin to enable. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN1 - * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @retval None - */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) -{ - /* Check the parameter */ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - - /* Enable the wake up pin */ - SET_BIT(PWR->CSR, WakeUpPinx); -} - -/** - * @brief Disables the Wake-up PINx functionality. - * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN1 - * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @retval None - */ -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) -{ - /* Check the parameter */ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - - /* Disable the wake up pin */ - CLEAR_BIT(PWR->CSR, WakeUpPinx); -} - -/** - * @brief Enters Sleep mode. - * - * @note In Sleep mode, all I/O pins keep the same state as in Run mode. - * - * @note In Sleep mode, the systick is stopped to avoid exit from this mode with - * systick interrupt when used as time base for Timeout - * - * @param Regulator Specifies the regulator state in SLEEP mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON - * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON - * @note This parameter is not used for the STM32F4 family and is kept as parameter - * just to maintain compatibility with the lower power families. - * @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - * @retval None - */ -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); - - /* Clear SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select SLEEP mode entry -------------------------------------------------*/ - if(SLEEPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } -} - -/** - * @brief Enters Stop mode. - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * @note When exiting Stop mode by issuing an interrupt or a wake-up event, - * the HSI RC oscillator is selected as system clock. - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * @param Regulator Specifies the regulator state in Stop mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON - * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON - * @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction - * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction - * @retval None - */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */ - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select Stop mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_STOPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - -/** - * @brief Enters Standby mode. - * @note In Standby mode, all I/O pins are high impedance except for: - * - Reset pad (still available) - * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC - * Alarm out, or RTC clock calibration out. - * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp. - * - WKUP pin 1 (PA0) if enabled. - * @retval None - */ -void HAL_PWR_EnterSTANDBYMode(void) -{ - /* Select Standby mode */ - SET_BIT(PWR->CR, PWR_CR_PDDS); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - -/** - * @brief This function handles the PWR PVD interrupt request. - * @note This API should be called under the PVD_IRQHandler(). - * @retval None - */ -void HAL_PWR_PVD_IRQHandler(void) -{ - /* Check PWR Exti flag */ - if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) - { - /* PWR PVD interrupt user callback */ - HAL_PWR_PVDCallback(); - - /* Clear PWR Exti pending bit */ - __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); - } -} - -/** - * @brief PWR PVD interrupt callback - * @retval None - */ -__weak void HAL_PWR_PVDCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_PWR_PVDCallback could be implemented in the user file - */ -} - -/** - * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. - * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * Setting this bit is useful when the processor is expected to run only on - * interruptions handling. - * @retval None - */ -void HAL_PWR_EnableSleepOnExit(void) -{ - /* Set SLEEPONEXIT bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. - * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * @retval None - */ -void HAL_PWR_DisableSleepOnExit(void) -{ - /* Clear SLEEPONEXIT bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Enables CORTEX M4 SEVONPEND bit. - * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_EnableSEVOnPend(void) -{ - /* Set SEVONPEND bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @brief Disables CORTEX M4 SEVONPEND bit. - * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_DisableSEVOnPend(void) -{ - /* Clear SEVONPEND bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c deleted file mode 100644 index 77f9c35..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c +++ /dev/null @@ -1,600 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr_ex.c - * @author MCD Application Team - * @brief Extended PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of PWR extension peripheral: - * + Peripheral Extended features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup PWREx PWREx - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup PWREx_Private_Constants - * @{ - */ -#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000U -#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000U -#define PWR_BKPREG_TIMEOUT_VALUE 1000U -#define PWR_VOSRDY_TIMEOUT_VALUE 1000U -/** - * @} - */ - - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions - * @brief Peripheral Extended features functions - * -@verbatim - - =============================================================================== - ##### Peripheral extended features functions ##### - =============================================================================== - - *** Main and Backup Regulators configuration *** - ================================================ - [..] - (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from - the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is - retained even in Standby or VBAT mode when the low power backup regulator - is enabled. It can be considered as an internal EEPROM when VBAT is - always present. You can use the HAL_PWREx_EnableBkUpReg() function to - enable the low power backup regulator. - - (+) When the backup domain is supplied by VDD (analog switch connected to VDD) - the backup SRAM is powered from VDD which replaces the VBAT power supply to - save battery life. - - (+) The backup SRAM is not mass erased by a tamper event. It is read - protected to prevent confidential data, such as cryptographic private - key, from being accessed. The backup SRAM can be erased only through - the Flash interface when a protection level change from level 1 to - level 0 is requested. - -@- Refer to the description of Read protection (RDP) in the Flash - programming manual. - - (+) The main internal regulator can be configured to have a tradeoff between - performance and power consumption when the device does not operate at - the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG() - macro which configure VOS bit in PWR_CR register - - Refer to the product datasheets for more details. - - *** FLASH Power Down configuration **** - ======================================= - [..] - (+) By setting the FPDS bit in the PWR_CR register by using the - HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power - down mode when the device enters Stop mode. When the Flash memory - is in power down mode, an additional startup delay is incurred when - waking up from Stop mode. - - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, the scale can be modified only when the PLL - is OFF and the HSI or HSE clock source is selected as system clock. - The new value programmed is active only when the PLL is ON. - When the PLL is OFF, the voltage scale 3 is automatically selected. - Refer to the datasheets for more details. - - *** Over-Drive and Under-Drive configuration **** - ================================================= - [..] - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Run mode: the main regulator has - 2 operating modes available: - (++) Normal mode: The CPU and core logic operate at maximum frequency at a given - voltage scaling (scale 1, scale 2 or scale 3) - (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a - higher frequency than the normal mode for a given voltage scaling (scale 1, - scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and - disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow - the sequence described in Reference manual. - - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Stop mode: the main regulator or low power regulator - supplies a low power voltage to the 1.2V domain, thus preserving the content of registers - and internal SRAM. 2 operating modes are available: - (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only - available when the main regulator or the low power regulator is used in Scale 3 or - low voltage mode. - (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only - available when the main regulator or the low power regulator is in low voltage mode. - -@endverbatim - * @{ - */ - -/** - * @brief Enables the Backup Regulator. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void) -{ - uint32_t tickstart = 0U; - - *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till Backup regulator ready flag is set */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET) - { - if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Disables the Backup Regulator. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void) -{ - uint32_t tickstart = 0U; - - *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till Backup regulator ready flag is set */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET) - { - if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Enables the Flash Power Down in Stop mode. - * @retval None - */ -void HAL_PWREx_EnableFlashPowerDown(void) -{ - *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Flash Power Down in Stop mode. - * @retval None - */ -void HAL_PWREx_DisableFlashPowerDown(void) -{ - *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE; -} - -/** - * @brief Return Voltage Scaling Range. - * @retval The configured scale for the regulator voltage(VOS bit field). - * The returned value can be one of the following: - * - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode - */ -uint32_t HAL_PWREx_GetVoltageRange(void) -{ - return (PWR->CR & PWR_CR_VOS); -} - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -/** - * @brief Configures the main internal regulator output voltage. - * @param VoltageScaling specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, - * the maximum value of fHCLK = 168 MHz. - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, - * the maximum value of fHCLK = 144 MHz. - * @note When moving from Range 1 to Range 2, the system frequency must be decreased to - * a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API. - * When moving from Range 2 to Range 1, the system frequency can be increased to - * a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) -{ - uint32_t tickstart = 0U; - - assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); - - /* Enable PWR RCC Clock Peripheral */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Set Range */ - __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) - { - if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || \ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Configures the main internal regulator output voltage. - * @param VoltageScaling specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, - * the maximum value of fHCLK is 168 MHz. It can be extended to - * 180 MHz by activating the over-drive mode. - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, - * the maximum value of fHCLK is 144 MHz. It can be extended to, - * 168 MHz by activating the over-drive mode. - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode, - * the maximum value of fHCLK is 120 MHz. - * @note To update the system clock frequency(SYSCLK): - * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig(). - * - Call the HAL_RCC_OscConfig() to configure the PLL. - * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale. - * - Set the new system clock frequency using the HAL_RCC_ClockConfig(). - * @note The scale can be modified only when the HSI or HSE clock source is selected - * as system clock source, otherwise the API returns HAL_ERROR. - * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits - * value in the PWR_CR1 register are not taken in account. - * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2. - * @note The new voltage scale is active only when the PLL is ON. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) -{ - uint32_t tickstart = 0U; - - assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); - - /* Enable PWR RCC Clock Peripheral */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - /* Disable the main PLL */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - /* Wait till PLL is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set Range */ - __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); - - /* Enable the main PLL */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) - { - if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Enables Main Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_EnableMainRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables Main Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xxdevices. - * @retval None - */ -void HAL_PWREx_DisableMainRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE; -} - -/** - * @brief Enables Low Power Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_EnableLowRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables Low Power Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_DisableLowRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE; -} - -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Activates the Over-Drive mode. - * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void) -{ - uint32_t tickstart = 0U; - - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable the Over-drive to extend the clock frequency to 180 Mhz */ - __HAL_PWR_OVERDRIVE_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Enable the Over-drive switch */ - __HAL_PWR_OVERDRIVESWITCHING_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) - { - if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Deactivates the Over-Drive mode. - * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void) -{ - uint32_t tickstart = 0U; - - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Disable the Over-drive switch */ - __HAL_PWR_OVERDRIVESWITCHING_DISABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Disable the Over-drive */ - __HAL_PWR_OVERDRIVE_DISABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Enters in Under-Drive STOP mode. - * - * @note This mode is only available for STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * - * @note This mode can be selected only when the Under-Drive is already active - * - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode - * - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - * - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * - * @note When exiting Stop mode by issuing an interrupt or a wake-up event, - * the HSI RC oscillator is selected as system clock. - * - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * - * @param Regulator specifies the regulator state in STOP mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction - * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction - * @retval None - */ -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator)); - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Enable the Under-drive Mode ---------------------------------------------*/ - /* Clear Under-drive flag */ - __HAL_PWR_CLEAR_ODRUDR_FLAG(); - - /* Enable the Under-drive */ - __HAL_PWR_UNDERDRIVE_ENABLE(); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg1 = PWR->CR; - /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */ - tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS); - - /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */ - tmpreg1 |= Regulator; - - /* Store the new value */ - PWR->CR = tmpreg1; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - - /* Select STOP mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); - - return HAL_OK; -} - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c deleted file mode 100644 index f187348..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c +++ /dev/null @@ -1,1122 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc.c - * @author MCD Application Team - * @brief RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Reset and Clock Control (RCC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### RCC specific features ##### - ============================================================================== - [..] - After reset the device is running from Internal High Speed oscillator - (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache - and I-Cache are disabled, and all peripherals are off except internal - SRAM, Flash and JTAG. - (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses; - all peripherals mapped on these busses are running at HSI speed. - (+) The clock for all peripherals is switched off, except the SRAM and FLASH. - (+) All GPIOs are in input floating state, except the JTAG pins which - are assigned to be used for debug purpose. - - [..] - Once the device started from reset, the user application has to: - (+) Configure the clock source to be used to drive the System clock - (if the application needs higher frequency/performance) - (+) Configure the System clock frequency and Flash settings - (+) Configure the AHB and APB busses prescalers - (+) Enable the clock for the peripheral(s) to be used - (+) Configure the clock source(s) for peripherals which clocks are not - derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG) - - ##### RCC Limitations ##### - ============================================================================== - [..] - A delay between an RCC peripheral clock enable and the effective peripheral - enabling should be taken into account in order to manage the peripheral read/write - from/to registers. - (+) This delay depends on the peripheral mapping. - (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle - after the clock enable bit is set on the hardware register - (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle - after the clock enable bit is set on the hardware register - - [..] - Implemented Workaround: - (+) For AHB & APB peripherals, a dummy read to the peripheral register has been - inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RCC RCC - * @brief RCC HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup RCC_Private_Constants - * @{ - */ - -/* Private macro -------------------------------------------------------------*/ -#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define MCO1_GPIO_PORT GPIOA -#define MCO1_PIN GPIO_PIN_8 - -#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() -#define MCO2_GPIO_PORT GPIOC -#define MCO2_PIN GPIO_PIN_9 -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Variables RCC Private Variables - * @{ - */ -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to configure the internal/external oscillators - (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1 - and APB2). - - [..] Internal/external clock and PLL configuration - (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through - the PLL as System clock source. - - (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC - clock source. - - (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or - through the PLL as System clock source. Can be used also as RTC clock source. - - (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. - - (#) PLL (clocked by HSI or HSE), featuring two different output clocks: - (++) The first output is used to generate the high speed system clock (up to 168 MHz) - (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), - the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz). - - (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() - and if a HSE clock failure occurs(HSE used directly or through PLL as System - clock source), the System clocks automatically switched to HSI and an interrupt - is generated if enabled. The interrupt is linked to the Cortex-M4 NMI - (Non-Maskable Interrupt) exception vector. - - (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL - clock (through a configurable prescaler) on PA8 pin. - - (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S - clock (through a configurable prescaler) on PC9 pin. - - [..] System, AHB and APB busses clocks configuration - (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, - HSE and PLL. - The AHB clock (HCLK) is derived from System clock through configurable - prescaler and used to clock the CPU, memory and peripherals mapped - on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived - from AHB clock through configurable prescalers and used to clock - the peripherals mapped on these busses. You can use - "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. - - (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum - frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices, - the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz, - PCLK2 84 MHz and PCLK1 42 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz, - PCLK2 100 MHz and PCLK1 50 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - -@endverbatim - * @{ - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE and PLL OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO1 and MCO2 OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_RCC_DeInit(void) -{ - return HAL_OK; -} - -/** - * @brief Initializes the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this API. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this API. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart, pll_config; - - /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) - { - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - /* Check the HSE State */ - if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSE is bypassed or disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) - { - /* When HSI is used as system clock it will not disabled */ - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value. */ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) - { - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - FlagStatus pwrclkchanged = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Update LSE configuration in Backup Domain control register */ - /* Requires to enable write access to Backup Domain of necessary */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR, PWR_CR_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set the new LSE configuration -----------------------------------------*/ - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); - /* Check the LSE State */ - if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) - { - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the main PLL clock source, multiplication and division factors. */ - WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ - RCC_OscInitStruct->PLL.PLLM | \ - (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ - (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ - (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))); - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - /* Check if there is a request to disable the PLL used as System clock source */ - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) - { - return HAL_ERROR; - } - else - { - /* Do not return HAL_ERROR if request repeats the current configuration */ - pll_config = RCC->PLLCFGR; -#if defined (RCC_PLLCFGR_PLLR) - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) -#else - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) -#endif - { - return HAL_ERROR; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Initializes the CPU, AHB and APB busses clocks according to the specified - * parameters in the RCC_ClkInitStruct. - * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC peripheral. - * @param FLatency FLASH Latency, this parameter depend on device selected - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated by HAL_RCC_GetHCLKFreq() function called within this function - * - * @note The HSI is used (enabled by hardware) as system clock source after - * startup from Reset, wake-up from STOP and STANDBY mode, or in case - * of failure of the HSE used directly or indirectly as system clock - * (if the Clock Security System CSS is enabled). - * - * @note A switch from one clock source to another occurs only if the target - * clock source is ready (clock stable after startup delay or PLL locked). - * If a clock source which is not yet ready is selected, the switch will - * occur when the clock source will be ready. - * - * @note Depending on the device voltage range, the software has to set correctly - * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency - * (for more details refer to section above "Initialization/de-initialization functions") - * @retval None - */ -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) -{ - uint32_t tickstart; - - /* Check Null pointer */ - if(RCC_ClkInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); - assert_param(IS_FLASH_LATENCY(FLatency)); - - /* To correctly read data from FLASH memory, the number of wait states (LATENCY) - must be correctly programmed according to the frequency of the CPU clock - (HCLK) and the supply voltage of the device. */ - - /* Increasing the number of wait states because of higher CPU frequency */ - if(FLatency > __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- HCLK Configuration --------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) - { - /* Set the highest APBx dividers in order to ensure that we do not go through - a non-spec phase whatever we decrease or increase HCLK. */ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16); - } - - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3)); - } - - assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); - } - - /*------------------------- SYSCLK Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) - { - assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); - - /* HSE is selected as System Clock Source */ - if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) - { - /* Check the HSE ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - return HAL_ERROR; - } - } - /* PLL is selected as System Clock Source */ - else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) || - (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)) - { - /* Check the PLL ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - return HAL_ERROR; - } - } - /* HSI is selected as System Clock Source */ - else - { - /* Check the HSI ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - return HAL_ERROR; - } - } - - __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) - { - if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Decreasing the number of wait states because of lower CPU frequency */ - if(FLatency < __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- PCLK1 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); - } - - /*-------------------------- PCLK2 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U)); - } - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos]; - - /* Configure the source of time base considering new system clocks settings */ - HAL_InitTick (uwTickPrio); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions - * @brief RCC clocks control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - -@endverbatim - * @{ - */ - -/** - * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9). - * @note PA8/PC9 should be configured in alternate function mode. - * @param RCC_MCOx specifies the output direction for the clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8). - * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9). - * @param RCC_MCOSource specifies the clock source to output. - * This parameter can be one of the following values: - * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source - * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx - * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices - * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source - * @param RCC_MCODiv specifies the MCOx prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - * @note For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have - * at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5). - * @retval None - */ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) -{ - GPIO_InitTypeDef GPIO_InitStruct; - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCOx)); - assert_param(IS_RCC_MCODIV(RCC_MCODiv)); - /* RCC_MCO1 */ - if(RCC_MCOx == RCC_MCO1) - { - assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); - - /* MCO1 Clock Enable */ - __MCO1_CLK_ENABLE(); - - /* Configure the MCO1 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO1_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv)); - - /* This RCC MCO1 enable feature is available only on STM32F410xx devices */ -#if defined(RCC_CFGR_MCO1EN) - __HAL_RCC_MCO1_ENABLE(); -#endif /* RCC_CFGR_MCO1EN */ - } -#if defined(RCC_CFGR_MCO2) - else - { - assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); - - /* MCO2 Clock Enable */ - __MCO2_CLK_ENABLE(); - - /* Configure the MCO2 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO2_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3U))); - - /* This RCC MCO2 enable feature is available only on STM32F410Rx devices */ -#if defined(RCC_CFGR_MCO2EN) - __HAL_RCC_MCO2_ENABLE(); -#endif /* RCC_CFGR_MCO2EN */ - } -#endif /* RCC_CFGR_MCO2 */ -} - -/** - * @brief Enables the Clock Security System. - * @note If a failure is detected on the HSE oscillator clock, this oscillator - * is automatically disabled and an interrupt is generated to inform the - * software about the failure (Clock Security System Interrupt, CSSI), - * allowing the MCU to perform rescue operations. The CSSI is linked to - * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. - * @retval None - */ -void HAL_RCC_EnableCSS(void) -{ - *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Clock Security System. - * @retval None - */ -void HAL_RCC_DisableCSS(void) -{ - *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE; -} - -/** - * @brief Returns the SYSCLK frequency - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * - * @retval SYSCLK frequency - */ -__weak uint32_t HAL_RCC_GetSysClockFreq(void) -{ - uint32_t pllm = 0U, pllvco = 0U, pllp = 0U; - uint32_t sysclockfreq = 0U; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (RCC->CFGR & RCC_CFGR_SWS) - { - case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ - { - sysclockfreq = HSI_VALUE; - break; - } - case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ - { - sysclockfreq = HSE_VALUE; - break; - } - case RCC_CFGR_SWS_PLL: /* PLL used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLP */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U); - - sysclockfreq = pllvco/pllp; - break; - } - default: - { - sysclockfreq = HSI_VALUE; - break; - } - } - return sysclockfreq; -} - -/** - * @brief Returns the HCLK frequency - * @note Each time HCLK changes, this function must be called to update the - * right HCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated within this function - * @retval HCLK frequency - */ -uint32_t HAL_RCC_GetHCLKFreq(void) -{ - return SystemCoreClock; -} - -/** - * @brief Returns the PCLK1 frequency - * @note Each time PCLK1 changes, this function must be called to update the - * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK1 frequency - */ -uint32_t HAL_RCC_GetPCLK1Freq(void) -{ - /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]); -} - -/** - * @brief Returns the PCLK2 frequency - * @note Each time PCLK2 changes, this function must be called to update the - * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK2 frequency - */ -uint32_t HAL_RCC_GetPCLK2Freq(void) -{ - /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]); -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * will be configured. - * @retval None - */ -__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Set all possible values for the Oscillator type parameter ---------------*/ - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; - - /* Get the HSE configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - - /* Get the HSI configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); - - /* Get the LSE configuration -----------------------------------------------*/ - if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } - - /* Get the PLL configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); - RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); - RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos); - RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); -} - -/** - * @brief Configures the RCC_ClkInitStruct according to the internal - * RCC configuration registers. - * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that - * will be configured. - * @param pFLatency Pointer on the Flash Latency. - * @retval None - */ -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) -{ - /* Set all possible values for the Clock type parameter --------------------*/ - RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; - - /* Get the SYSCLK configuration --------------------------------------------*/ - RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); - - /* Get the HCLK configuration ----------------------------------------------*/ - RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); - - /* Get the APB1 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); - - /* Get the APB2 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U); - - /* Get the Flash Wait State (Latency) configuration ------------------------*/ - *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); -} - -/** - * @brief This function handles the RCC CSS interrupt request. - * @note This API should be called under the NMI_Handler(). - * @retval None - */ -void HAL_RCC_NMI_IRQHandler(void) -{ - /* Check RCC CSSF flag */ - if(__HAL_RCC_GET_IT(RCC_IT_CSS)) - { - /* RCC Clock Security System interrupt user callback */ - HAL_RCC_CSSCallback(); - - /* Clear RCC CSS pending bit */ - __HAL_RCC_CLEAR_IT(RCC_IT_CSS); - } -} - -/** - * @brief RCC Clock Security System interrupt callback - * @retval None - */ -__weak void HAL_RCC_CSSCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_RCC_CSSCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c deleted file mode 100644 index 5076628..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c +++ /dev/null @@ -1,3784 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc_ex.c - * @author MCD Application Team - * @brief Extension RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities RCC extension peripheral: - * + Extended Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RCCEx RCCEx - * @brief RCCEx HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup RCCEx_Private_Constants - * @{ - */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions - * @{ - */ - -/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - [..] - (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to - select the RTC clock source; in this case the Backup domain will be reset in - order to modify the RTC Clock source, as consequence RTC registers (including - the backup registers) and RCC_BDCR register are set to their reset values. - -@endverbatim - * @{ - */ - -#if defined(STM32F446xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - uint32_t plli2sp = 0U; - uint32_t plli2sq = 0U; - uint32_t plli2sr = 0U; - uint32_t pllsaip = 0U; - uint32_t pllsaiq = 0U; - uint32_t plli2sused = 0U; - uint32_t pllsaiused = 0U; - - /* Check the peripheral clock selection parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*------------------------ I2S APB1 configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- I2S APB2 configuration ----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*--------------------------- SAI1 configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*-------------------------- SAI2 configuration ----------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection)); - - /* Configure SAI2 Clock source */ - __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); - - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- RTC configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - /* Configure Timer Prescaler */ - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- FMPI2C1 Configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ CEC Configuration -------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) - { - /* Check the parameters */ - assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); - - /* Configure the CEC clock source */ - __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- CLK48 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the CLK48 clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - - /* Enable the PLLSAI when it's used as clock source for CLK48 */ - if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- SDIO Configuration -------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ SPDIFRX Configuration ---------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) - { - /* Check the parameters */ - assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection)); - - /* Configure the SPDIFRX clock source */ - __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection); - /* Enable the PLLI2S when it's used as clock source for SPDIFRX */ - if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- PLLI2S Configuration ------------------------*/ - /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1, - I2S on APB2 or SPDIFRX */ - if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) - { - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* check for common PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /*------ In Case of PLLI2S is selected as source clock for I2S -----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S))) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */ - plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S))) - { - /* Check for PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - /* Check for PLLI2S/DIVQ parameters */ - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */ - plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*------ In Case of PLLI2S is selected as source clock for SPDIFRX -------*/ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- PLLSAI Configuration -----------------------*/ - /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CLK48 or SDIO */ - if(pllsaiused == 1U) - { - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM)); - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /*------ In Case of PLLSAI is selected as source clock for SAI -----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI))) - { - /* check for PLLSAIQ Parameter */ - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - /* check for PLLSAI/DIVQ Parameter */ - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0U); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*------ In Case of PLLSAI is selected as source clock for CLK48 ---------*/ - /* In Case of PLLI2S is selected as source clock for CLK48 */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); - /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Configure the PLLSAI division factors */ - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLI2SN/PLLSAIM) */ - /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0U); - } - - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMPI2C1 |\ - RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO |\ - RCC_PERIPHCLK_SPDIFRX; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> RCC_PLLI2SCFGR_PLLI2SM_Pos); - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Get the PLLSAI Clock configuration --------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> RCC_PLLSAICFGR_PLLSAIM_Pos); - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - - /* Get the SAI1 clock configuration ----------------------------------------*/ - PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); - - /* Get the SAI2 clock configuration ----------------------------------------*/ - PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); - - /* Get the I2S APB1 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE(); - - /* Get the I2S APB2 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE(); - - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the CEC clock configuration -----------------------------------------*/ - PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); - - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the CLK48 clock configuration ----------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - /* Get the SPDIFRX clock configuration -------------------------------------*/ - PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE(); - - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock - * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB1: I2S APB1 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB2: I2S APB2 peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - uint32_t tmpreg1 = 0U; - /* This variable used to store the SAI clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - /* This variable used to store the SAI clock source */ - uint32_t saiclocksource = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_SAI1: - case RCC_PERIPHCLK_SAI2: - { - saiclocksource = RCC->DCKCFGR; - saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC); - switch (saiclocksource) - { - case 0U: /* PLLSAI is the clock source for SAI*/ - { - /* Configure the PLLSAI division factor */ - /* PLLSAI_VCO Input = PLL_SOURCE/PLLSAIM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM))); - } - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U; - frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg1); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U); - frequency = frequency/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/ - case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/ - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM))); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U; - frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg1); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U); - frequency = frequency/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/ - case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/ - { - /* Configure the PLLI2S division factor */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - /* SAI_CLK_x = PLL_VCO Output/PLLR */ - tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U; - frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U))/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/ - { - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/ - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - frequency = (uint32_t)(HSI_VALUE); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - frequency = (uint32_t)(HSE_VALUE); - } - break; - } - default : - { - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB1: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB1_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB1CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB2: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB2_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB2CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC, RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - uint32_t pllsaip = 0U; - uint32_t pllsaiq = 0U; - uint32_t pllsair = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*--------------------------- CLK48 Configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the CLK48 clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ SDIO Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/ - /*------------------- Common configuration SAI/I2S -------------------------*/ - /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------- I2S configuration -------------------------------*/ - /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added - only for I2S configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S)) - { - /* Check the PLLI2S division factors */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Configure the PLLI2S multiplication and division factors */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/ - /*----------------------- Common configuration SAI/LTDC --------------------*/ - /* In Case of SAI, LTDC or CLK48 Clock Configuration through PLLSAI, PLLSAIN division - factor is common parameters for these peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && - (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP))) - { - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI)) - { - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, pllsair); - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*---------------------------- LTDC configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) - { - assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); - assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, pllsaiq, PeriphClkInit->PLLSAI.PLLSAIR); - /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); - } - - /*---------------------------- CLK48 configuration ------------------------*/ - /* Configure the PLLSAI when it is used as clock source for CLK48 */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == (RCC_PERIPHCLK_CLK48)) && - (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)) - { - assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); - - /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* CLK48_CLK(first level) = PLLSAI_VCO Output/PLLSAIP */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, pllsair); - } - - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - - /*--------------------------------------------------------------------------*/ - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - return HAL_OK; -} - -/** - * @brief Configures the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI |\ - RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Get the PLLSAI Clock configuration --------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR); - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the CLK48 clock configuration -------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t plli2sq = 0U; -#endif /* STM32F413xx || STM32F423xx */ - uint32_t plli2sused = 0U; - - /* Check the peripheral clock selection parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*----------------------------------- I2S APB1 configuration ---------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------------- I2S APB2 configuration ---------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*----------------------- SAI1 Block A configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIA) == (RCC_PERIPHCLK_SAIA)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAIACLKSOURCE(PeriphClkInit->SaiAClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(PeriphClkInit->SaiAClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLI2SR) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLR) - { - /* Check for PLL/DIVR parameters */ - assert_param(IS_RCC_PLL_DIVR_VALUE(PeriphClkInit->PLLDivR)); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ - __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLDivR); - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------- SAI1 Block B configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIB) == (RCC_PERIPHCLK_SAIB)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAIBCLKSOURCE(PeriphClkInit->SaiBClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(PeriphClkInit->SaiBClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLI2SR) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLR) - { - /* Check for PLL/DIVR parameters */ - assert_param(IS_RCC_PLL_DIVR_VALUE(PeriphClkInit->PLLDivR)); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ - __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLDivR); - } - } - /*--------------------------------------------------------------------------*/ -#endif /* STM32F413xx || STM32F423xx */ - - /*------------------------------------ RTC configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------ TIM configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - /* Configure Timer Prescaler */ - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- FMPI2C1 Configuration --------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- CLK48 Configuration ----------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - - /* Enable the PLLI2S when it's used as clock source for CLK48 */ - if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- SDIO Configuration -----------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------------------------- PLLI2S Configuration --------------*/ - /* PLLI2S is configured when a peripheral will use it as source clock : I2S on APB1 or - I2S on APB2*/ - if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) - { - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* check for common PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SCLKSOURCE(PeriphClkInit->PLLI2SSelection)); - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - /*-------------------- Set the PLL I2S clock -----------------------------*/ - __HAL_RCC_PLL_I2S_CONFIG(PeriphClkInit->PLLI2SSelection); - - /*------- In Case of PLLI2S is selected as source clock for I2S ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) && (PeriphClkInit->SdioClockSelection == RCC_SDIOCLKSOURCE_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ))) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIA) == RCC_PERIPHCLK_SAIA) && (PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLI2SR)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIB) == RCC_PERIPHCLK_SAIB) && (PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLI2SR))) - { - /* Check for PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Check for PLLI2S/DIVR parameters */ - assert_param(IS_RCC_PLLI2S_DIVR_VALUE(PeriphClkInit->PLLI2SDivR)); - - /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for SAI configuration) */ - plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVR */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLI2SDivR); - } -#endif /* STM32F413xx || STM32F423xx */ - - /*----------------- In Case of PLLI2S is just selected ------------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM1 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); - - /* Configure the DFSDM1 interface clock source */ - __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM1 Audio clock source configuration -------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); - - /* Configure the DFSDM1 Audio interface clock source */ - __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); - } - /*--------------------------------------------------------------------------*/ - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*-------------------- DFSDM2 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2) == RCC_PERIPHCLK_DFSDM2) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM2CLKSOURCE(PeriphClkInit->Dfsdm2ClockSelection)); - - /* Configure the DFSDM1 interface clock source */ - __HAL_RCC_DFSDM2_CONFIG(PeriphClkInit->Dfsdm2ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM2 Audio clock source configuration -------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2_AUDIO) == RCC_PERIPHCLK_DFSDM2_AUDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM2AUDIOCLKSOURCE(PeriphClkInit->Dfsdm2AudioClockSelection)); - - /* Configure the DFSDM1 Audio interface clock source */ - __HAL_RCC_DFSDM2AUDIO_CONFIG(PeriphClkInit->Dfsdm2AudioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- LPTIM1 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); - - /* Configure the LPTIM1 clock source */ - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - /*--------------------------------------------------------------------------*/ -#endif /* STM32F413xx || STM32F423xx */ - - return HAL_OK; -} - -/** - * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\ - RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_DFSDM1 |\ - RCC_PERIPHCLK_DFSDM1_AUDIO | RCC_PERIPHCLK_DFSDM2 |\ - RCC_PERIPHCLK_DFSDM2_AUDIO | RCC_PERIPHCLK_LPTIM1 |\ - RCC_PERIPHCLK_SAIA | RCC_PERIPHCLK_SAIB; -#else /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\ - RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_DFSDM1 |\ - RCC_PERIPHCLK_DFSDM1_AUDIO; -#endif /* STM32F413xx || STM32F423xx */ - - - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> RCC_PLLI2SCFGR_PLLI2SM_Pos); - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); -#if defined(STM32F413xx) || defined(STM32F423xx) - /* Get the PLL/PLLI2S division factors -------------------------------------*/ - PeriphClkInit->PLLI2SDivR = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVR) >> RCC_DCKCFGR_PLLI2SDIVR_Pos); - PeriphClkInit->PLLDivR = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLDIVR) >> RCC_DCKCFGR_PLLDIVR_Pos); -#endif /* STM32F413xx || STM32F423xx */ - - /* Get the I2S APB1 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE(); - - /* Get the I2S APB2 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE(); - - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the CLK48 clock configuration ---------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - /* Get the DFSDM1 clock configuration --------------------------------------*/ - PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); - - /* Get the DFSDM1 Audio clock configuration --------------------------------*/ - PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); - -#if defined(STM32F413xx) || defined(STM32F423xx) - /* Get the DFSDM2 clock configuration --------------------------------------*/ - PeriphClkInit->Dfsdm2ClockSelection = __HAL_RCC_GET_DFSDM2_SOURCE(); - - /* Get the DFSDM2 Audio clock configuration --------------------------------*/ - PeriphClkInit->Dfsdm2AudioClockSelection = __HAL_RCC_GET_DFSDM2AUDIO_SOURCE(); - - /* Get the LPTIM1 clock configuration --------------------------------------*/ - PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); - - /* Get the SAI1 Block Aclock configuration ---------------------------------*/ - PeriphClkInit->SaiAClockSelection = __HAL_RCC_GET_SAI_BLOCKA_SOURCE(); - - /* Get the SAI1 Block B clock configuration --------------------------------*/ - PeriphClkInit->SaiBClockSelection = __HAL_RCC_GET_SAI_BLOCKB_SOURCE(); -#endif /* STM32F413xx || STM32F423xx */ - - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(I2S..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S_APB1: I2S APB1 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB2: I2S APB2 peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S_APB1: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB1_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLI2S: - { - if((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SSRC) == RCC_PLLI2SCFGR_PLLI2SSRC) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(EXTERNAL_CLOCK_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - } - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB1CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB2: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB2_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLI2S: - { - if((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SSRC) == RCC_PLLI2SCFGR_PLLI2SSRC) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(EXTERNAL_CLOCK_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - } - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB2CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the - * RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks). - * - * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case - * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup - * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- FMPI2C1 Configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- LPTIM1 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); - - /* Configure the LPTIM1 clock source */ - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - - /*---------------------------- I2S Configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPBCLKSOURCE(PeriphClkInit->I2SClockSelection)); - - /* Configure the I2S clock source */ - __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2SClockSelection); - } - - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC; - - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the I2S clock configuration -----------------------------------------*/ - PeriphClkInit->I2SClockSelection = __HAL_RCC_GET_I2S_SOURCE(); - - -} -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPBCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPBCLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPBCLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/ - /*----------------------- Common configuration SAI/I2S ---------------------*/ - /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- I2S configuration -------------------------*/ - /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added - only for I2S configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S)) - { - /* Check the PLLI2S division factors */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Configure the PLLI2S multiplication and division factors */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/ - /*----------------------- Common configuration SAI/LTDC --------------------*/ - /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC)) - { - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI)) - { - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*---------------------------- LTDC configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) - { - assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); - assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); - - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR); - /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); - } - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - return HAL_OK; -} - -/** - * @brief Configures the PeriphClkInit according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC; - - /* Get the PLLI2S Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Get the PLLSAI Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR); - /* Get the RTC Clock configuration -----------------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the - * RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks). - * - * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case - * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup - * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*---------------------------- I2S configuration ---------------------------*/ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); -#if defined(STM32F411xE) - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); -#endif /* STM32F411xE */ - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - -#if defined(STM32F411xE) - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR); -#else - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); -#endif /* STM32F411xE */ - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); -#if defined(STM32F411xE) - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM); -#endif /* STM32F411xE */ - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { -#if defined(STM32F411xE) - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } -#else - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } -#endif /* STM32F411xE */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Select LSE mode - * - * @note This mode is only available for STM32F410xx/STM32F411xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices. - * - * @param Mode specifies the LSE mode. - * This parameter can be one of the following values: - * @arg RCC_LSE_LOWPOWER_MODE: LSE oscillator in low power mode selection - * @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection - * @retval None - */ -void HAL_RCCEx_SelectLSEMode(uint8_t Mode) -{ - /* Check the parameters */ - assert_param(IS_RCC_LSE_MODE(Mode)); - if(Mode == RCC_LSE_HIGHDRIVE_MODE) - { - SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); - } - else - { - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); - } -} - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions - * @brief Extended Clock management functions - * -@verbatim - =============================================================================== - ##### Extended clock management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the - activation or deactivation of PLLI2S, PLLSAI. -@endverbatim - * @{ - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Enable PLLI2S. - * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that - * contains the configuration information for the PLLI2S - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit) -{ - uint32_t tickstart; - - /* Check for parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SInit->PLLI2SN)); - assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SInit->PLLI2SR)); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - assert_param(IS_RCC_PLLI2SM_VALUE(PLLI2SInit->PLLI2SM)); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -#if defined(RCC_PLLI2SCFGR_PLLI2SP) - assert_param(IS_RCC_PLLI2SP_VALUE(PLLI2SInit->PLLI2SP)); -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) - assert_param(IS_RCC_PLLI2SQ_VALUE(PLLI2SInit->PLLI2SQ)); -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Wait till PLLI2S is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Configure the PLLI2S division factors */ -#if defined(STM32F446xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SPCLK = PLLI2S_VCO / PLLI2SP */ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, \ - PLLI2SInit->PLLI2SP, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, \ - PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F411xE) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SR); -#else - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x PLLI2SN */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SR); -#endif /* STM32F446xx */ - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - - /* Wait till PLLI2S is ready */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLLI2S. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void) -{ - uint32_t tickstart; - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Wait till PLLI2S is disabled */ - tickstart = HAL_GetTick(); - while(READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Enable PLLSAI. - * @param PLLSAIInit pointer to an RCC_PLLSAIInitTypeDef structure that - * contains the configuration information for the PLLSAI - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit) -{ - uint32_t tickstart; - - /* Check for parameters */ - assert_param(IS_RCC_PLLSAIN_VALUE(PLLSAIInit->PLLSAIN)); - assert_param(IS_RCC_PLLSAIQ_VALUE(PLLSAIInit->PLLSAIQ)); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - assert_param(IS_RCC_PLLSAIM_VALUE(PLLSAIInit->PLLSAIM)); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -#if defined(RCC_PLLSAICFGR_PLLSAIP) - assert_param(IS_RCC_PLLSAIP_VALUE(PLLSAIInit->PLLSAIP)); -#endif /* RCC_PLLSAICFGR_PLLSAIP */ -#if defined(RCC_PLLSAICFGR_PLLSAIR) - assert_param(IS_RCC_PLLSAIR_VALUE(PLLSAIInit->PLLSAIR)); -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - - /* Disable the PLLSAI */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Wait till PLLSAI is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Configure the PLLSAI division factors */ -#if defined(STM32F446xx) - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLSAIN/PLLSAIM) */ - /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIM, PLLSAIInit->PLLSAIN, \ - PLLSAIInit->PLLSAIP, PLLSAIInit->PLLSAIQ, 0U); -#elif defined(STM32F469xx) || defined(STM32F479xx) - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */ - /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, \ - PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); -#else - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x PLLSAIN */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); -#endif /* STM32F446xx */ - - /* Enable the PLLSAI */ - __HAL_RCC_PLLSAI_ENABLE(); - - /* Wait till PLLSAI is ready */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLLSAI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void) -{ - uint32_t tickstart; - - /* Disable the PLLSAI */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Wait till PLLSAI is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @} - */ - -#if defined(STM32F446xx) -/** - * @brief Returns the SYSCLK frequency - * - * @note This function implementation is valid only for STM32F446xx devices. - * @note This function add the PLL/PLLR System clock source - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL or PLLR, function returns values based on HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * - * @retval SYSCLK frequency - */ -uint32_t HAL_RCC_GetSysClockFreq(void) -{ - uint32_t pllm = 0U; - uint32_t pllvco = 0U; - uint32_t pllp = 0U; - uint32_t pllr = 0U; - uint32_t sysclockfreq = 0U; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (RCC->CFGR & RCC_CFGR_SWS) - { - case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ - { - sysclockfreq = HSI_VALUE; - break; - } - case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ - { - sysclockfreq = HSE_VALUE; - break; - } - case RCC_CFGR_SWS_PLL: /* PLL/PLLP used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLP */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U); - - sysclockfreq = pllvco/pllp; - break; - } - case RCC_CFGR_SWS_PLLR: /* PLL/PLLR used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLR */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos); - - sysclockfreq = pllvco/pllr; - break; - } - default: - { - sysclockfreq = HSI_VALUE; - break; - } - } - return sysclockfreq; -} -#endif /* STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE, PLL, PLLI2S and PLLSAI OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO1 and MCO2 OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_DeInit(void) -{ - uint32_t tickstart; - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Set HSION bit to the reset value */ - SET_BIT(RCC->CR, RCC_CR_HSION); - - /* Wait till HSI is ready */ - while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) - { - if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set HSITRIM[4:0] bits to the reset value */ - SET_BIT(RCC->CR, RCC_CR_HSITRIM_4); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset CFGR register */ - CLEAR_REG(RCC->CFGR); - - /* Wait till clock switch is ready */ - while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) - { - if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Clear HSEON, HSEBYP and CSSON bits */ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_CSSON); - - /* Wait till HSE is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Clear PLLON bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLON); - - /* Wait till PLL is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - -#if defined(RCC_PLLI2S_SUPPORT) - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset PLLI2SON bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); - - /* Wait till PLLI2S is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset PLLSAI bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); - - /* Wait till PLLSAI is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } -#endif /* RCC_PLLSAI_SUPPORT */ - - /* Once PLL, PLLI2S and PLLSAI are OFF, reset PLLCFGR register to default value */ -#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || \ - defined(STM32F423xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLR_1; -#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) - RCC->PLLCFGR = RCC_PLLCFGR_PLLR_0 | RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_0 | RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_3; -#else - RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2; -#endif /* STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F446xx || STM32F469xx || STM32F479xx */ - - /* Reset PLLI2SCFGR register to default value */ -#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || \ - defined(STM32F423xx) || defined(STM32F446xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F411xE) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1; -#endif /* STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F446xx */ - - /* Reset PLLSAICFGR register */ -#if defined(STM32F427xx) || defined(STM32F429xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIR_1; -#elif defined(STM32F446xx) - RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2; -#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F469xx || STM32F479xx */ - - /* Disable all interrupts */ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE); - -#if defined(RCC_CIR_PLLI2SRDYIE) - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -#endif /* RCC_CIR_PLLI2SRDYIE */ - -#if defined(RCC_CIR_PLLSAIRDYIE) - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -#endif /* RCC_CIR_PLLSAIRDYIE */ - - /* Clear all interrupt flags */ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_CSSC); - -#if defined(RCC_CIR_PLLI2SRDYC) - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); -#endif /* RCC_CIR_PLLI2SRDYC */ - -#if defined(RCC_CIR_PLLSAIRDYC) - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); -#endif /* RCC_CIR_PLLSAIRDYC */ - - /* Clear LSION bit */ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); - - /* Reset all CSR flags */ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HSI_VALUE; - - /* Adapt Systick interrupt period */ - if(HAL_InitTick(uwTickPrio) != HAL_OK) - { - return HAL_ERROR; - } - else - { - return HAL_OK; - } -} - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Initializes the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this API. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this API. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @note This function add the PLL/PLLR factor management during PLL configuration this feature - * is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart, pll_config; - - /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ -#if defined(STM32F446xx) - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) -#else - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) -#endif /* STM32F446xx */ - { - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - /* Check the HSE State */ - if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is bypassed or disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ -#if defined(STM32F446xx) - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) -#else - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) -#endif /* STM32F446xx */ - { - /* When HSI is used as system clock it will not disabled */ - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) - { - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - FlagStatus pwrclkchanged = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Update LSE configuration in Backup Domain control register */ - /* Requires to enable write access to Backup Domain of necessary */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR, PWR_CR_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set the new LSE configuration -----------------------------------------*/ - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); - /* Check the LSE State */ - if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) - { - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); - assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the main PLL clock source, multiplication and division factors. */ - WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ - RCC_OscInitStruct->PLL.PLLM | \ - (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ - (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ - (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos) | \ - (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))); - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - /* Check if there is a request to disable the PLL used as System clock source */ - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) - { - return HAL_ERROR; - } - else - { - /* Do not return HAL_ERROR if request repeats the current configuration */ - pll_config = RCC->PLLCFGR; -#if defined (RCC_PLLCFGR_PLLR) - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) -#else - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) -#endif - { - return HAL_ERROR; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that will be configured. - * - * @note This function is only available in case of STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices. - * @note This function add the PLL/PLLR factor management - * @retval None - */ -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Set all possible values for the Oscillator type parameter ---------------*/ - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; - - /* Get the HSE configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - - /* Get the HSI configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); - - /* Get the LSE configuration -----------------------------------------------*/ - if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } - - /* Get the PLL configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); - RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); - RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos); - RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); - RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos); -} -#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c deleted file mode 100644 index 62d5d65..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c +++ /dev/null @@ -1,3915 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_spi.c - * @author MCD Application Team - * @brief SPI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Serial Peripheral Interface (SPI) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The SPI HAL driver can be used as follows: - - (#) Declare a SPI_HandleTypeDef handle structure, for example: - SPI_HandleTypeDef hspi; - - (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: - (##) Enable the SPIx interface clock - (##) SPI pins configuration - (+++) Enable the clock for the SPI GPIOs - (+++) Configure these SPI pins as alternate function push-pull - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the SPIx interrupt priority - (+++) Enable the NVIC SPI IRQ handle - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel - (+++) Enable the DMAx clock - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx Stream/Channel - (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel - - (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS - management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. - - (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: - (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) - by calling the customized HAL_SPI_MspInit() API. - [..] - Circular mode restriction: - (#) The DMA circular mode cannot be used when the SPI is configured in these modes: - (##) Master 2Lines RxOnly - (##) Master 1Line Rx - (#) The CRC feature is not managed when the DMA circular mode is enabled - (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs - the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks - [..] - Master Receive mode restriction: - (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or - bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI - does not initiate a new transfer the following procedure has to be respected: - (##) HAL_SPI_DeInit() - (##) HAL_SPI_Init() - [..] - Callback registration: - - (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. - - Function HAL_SPI_RegisterCallback() allows to register following callbacks: - (++) TxCpltCallback : SPI Tx Completed callback - (++) RxCpltCallback : SPI Rx Completed callback - (++) TxRxCpltCallback : SPI TxRx Completed callback - (++) TxHalfCpltCallback : SPI Tx Half Completed callback - (++) RxHalfCpltCallback : SPI Rx Half Completed callback - (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback - (++) ErrorCallback : SPI Error callback - (++) AbortCpltCallback : SPI Abort callback - (++) MspInitCallback : SPI Msp Init callback - (++) MspDeInitCallback : SPI Msp DeInit callback - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - - (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default - weak function. - HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (++) TxCpltCallback : SPI Tx Completed callback - (++) RxCpltCallback : SPI Rx Completed callback - (++) TxRxCpltCallback : SPI TxRx Completed callback - (++) TxHalfCpltCallback : SPI Tx Half Completed callback - (++) RxHalfCpltCallback : SPI Rx Half Completed callback - (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback - (++) ErrorCallback : SPI Error callback - (++) AbortCpltCallback : SPI Abort callback - (++) MspInitCallback : SPI Msp Init callback - (++) MspDeInitCallback : SPI Msp DeInit callback - - [..] - By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - - [..] - Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() - or HAL_SPI_Init() function. - - [..] - When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - [..] - Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes, - the following table resume the max SPI frequency reached with data size 8bits/16bits, - according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance. - - @endverbatim - - Additional table : - - DataSize = SPI_DATASIZE_8BIT: - +----------------------------------------------------------------------------------------------+ - | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | - | Process | Transfer mode |---------------------|----------------------|----------------------| - | | | Master | Slave | Master | Slave | Master | Slave | - |==============================================================================================| - | T | Polling | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | / | Interrupt | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | - | R |----------------|----------|----------|-----------|----------|-----------|----------| - | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | - |=========|================|==========|==========|===========|==========|===========|==========| - | | Polling | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 | - | |----------------|----------|----------|-----------|----------|-----------|----------| - | R | Interrupt | Fpclk/8 | Fpclk/8 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | | DMA | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/128 | Fpclk/2 | - |=========|================|==========|==========|===========|==========|===========|==========| - | | Polling | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/2 | Fpclk/64 | - | |----------------|----------|----------|-----------|----------|-----------|----------| - | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/2 | Fpclk/64 | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/128| - +----------------------------------------------------------------------------------------------+ - - DataSize = SPI_DATASIZE_16BIT: - +----------------------------------------------------------------------------------------------+ - | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | - | Process | Transfer mode |---------------------|----------------------|----------------------| - | | | Master | Slave | Master | Slave | Master | Slave | - |==============================================================================================| - | T | Polling | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | / | Interrupt | Fpclk/4 | Fpclk/4 | NA | NA | NA | NA | - | R |----------------|----------|----------|-----------|----------|-----------|----------| - | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | - |=========|================|==========|==========|===========|==========|===========|==========| - | | Polling | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/32 | Fpclk/2 | - | |----------------|----------|----------|-----------|----------|-----------|----------| - | R | Interrupt | Fpclk/4 | Fpclk/4 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | | DMA | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/128 | Fpclk/2 | - |=========|================|==========|==========|===========|==========|===========|==========| - | | Polling | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/32 | - | |----------------|----------|----------|-----------|----------|-----------|----------| - | T | Interrupt | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/64 | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/128| - +----------------------------------------------------------------------------------------------+ - @note The max SPI frequency depend on SPI data size (8bits, 16bits), - SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA). - @note - (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA() - (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() - (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() - - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup SPI SPI - * @brief SPI HAL module driver - * @{ - */ -#ifdef HAL_SPI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/** @defgroup SPI_Private_Constants SPI Private Constants - * @{ - */ -#define SPI_DEFAULT_TIMEOUT 100U -#define SPI_BSY_FLAG_WORKAROUND_TIMEOUT 1000U /*!< Timeout 1000 µs */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup SPI_Private_Functions SPI Private Functions - * @{ - */ -static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAError(DMA_HandleTypeDef *hdma); -static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); -static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); -static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, - uint32_t Timeout, uint32_t Tickstart); -static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi); -#if (USE_SPI_CRC != 0U) -static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); -static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); -#endif /* USE_SPI_CRC */ -static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi); -static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi); -static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi); -static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi); -static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi); -static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SPI_Exported_Functions SPI Exported Functions - * @{ - */ - -/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - de-initialize the SPIx peripheral: - - (+) User must implement HAL_SPI_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_SPI_Init() to configure the selected device with - the selected configuration: - (++) Mode - (++) Direction - (++) Data Size - (++) Clock Polarity and Phase - (++) NSS Management - (++) BaudRate Prescaler - (++) FirstBit - (++) TIMode - (++) CRC Calculation - (++) CRC Polynomial if CRC enabled - - (+) Call the function HAL_SPI_DeInit() to restore the default configuration - of the selected SPIx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the SPI according to the specified parameters - * in the SPI_InitTypeDef and initialize the associated handle. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) -{ - /* Check the SPI handle allocation */ - if (hspi == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); - assert_param(IS_SPI_MODE(hspi->Init.Mode)); - assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); - assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); - assert_param(IS_SPI_NSS(hspi->Init.NSS)); - assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); - assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); - assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); - if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) - { - assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); - assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); - - if (hspi->Init.Mode == SPI_MODE_MASTER) - { - assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); - } - else - { - /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */ - hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; - } - } - else - { - assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); - - /* Force polarity and phase to TI protocaol requirements */ - hspi->Init.CLKPolarity = SPI_POLARITY_LOW; - hspi->Init.CLKPhase = SPI_PHASE_1EDGE; - } -#if (USE_SPI_CRC != 0U) - assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); - } -#else - hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; -#endif /* USE_SPI_CRC */ - - if (hspi->State == HAL_SPI_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hspi->Lock = HAL_UNLOCKED; - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - /* Init the SPI Callback settings */ - hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ - hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ - hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ - hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ - hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ - hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - - if (hspi->MspInitCallback == NULL) - { - hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - hspi->MspInitCallback(hspi); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - HAL_SPI_MspInit(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - - hspi->State = HAL_SPI_STATE_BUSY; - - /* Disable the selected SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - - /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ - /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management, - Communication speed, First bit and CRC calculation state */ - WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) | - (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) | - (hspi->Init.DataSize & SPI_CR1_DFF) | - (hspi->Init.CLKPolarity & SPI_CR1_CPOL) | - (hspi->Init.CLKPhase & SPI_CR1_CPHA) | - (hspi->Init.NSS & SPI_CR1_SSM) | - (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) | - (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | - (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); - - /* Configure : NSS management, TI Mode */ - WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | (hspi->Init.TIMode & SPI_CR2_FRF))); - -#if (USE_SPI_CRC != 0U) - /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ - /* Configure : CRC Polynomial */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk)); - } -#endif /* USE_SPI_CRC */ - -#if defined(SPI_I2SCFGR_I2SMOD) - /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ - CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); -#endif /* SPI_I2SCFGR_I2SMOD */ - - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->State = HAL_SPI_STATE_READY; - - return HAL_OK; -} - -/** - * @brief De-Initialize the SPI peripheral. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) -{ - /* Check the SPI handle allocation */ - if (hspi == NULL) - { - return HAL_ERROR; - } - - /* Check SPI Instance parameter */ - assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); - - hspi->State = HAL_SPI_STATE_BUSY; - - /* Disable the SPI Peripheral Clock */ - __HAL_SPI_DISABLE(hspi); - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - if (hspi->MspDeInitCallback == NULL) - { - hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - hspi->MspDeInitCallback(hspi); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - HAL_SPI_MspDeInit(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->State = HAL_SPI_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief Initialize the SPI MSP. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_MspInit should be implemented in the user file - */ -} - -/** - * @brief De-Initialize the SPI MSP. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_MspDeInit should be implemented in the user file - */ -} - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -/** - * @brief Register a User SPI Callback - * To be used instead of the weak predefined callback - * @param hspi Pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI. - * @param CallbackID ID of the callback to be registered - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, - pSPI_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hspi); - - if (HAL_SPI_STATE_READY == hspi->State) - { - switch (CallbackID) - { - case HAL_SPI_TX_COMPLETE_CB_ID : - hspi->TxCpltCallback = pCallback; - break; - - case HAL_SPI_RX_COMPLETE_CB_ID : - hspi->RxCpltCallback = pCallback; - break; - - case HAL_SPI_TX_RX_COMPLETE_CB_ID : - hspi->TxRxCpltCallback = pCallback; - break; - - case HAL_SPI_TX_HALF_COMPLETE_CB_ID : - hspi->TxHalfCpltCallback = pCallback; - break; - - case HAL_SPI_RX_HALF_COMPLETE_CB_ID : - hspi->RxHalfCpltCallback = pCallback; - break; - - case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : - hspi->TxRxHalfCpltCallback = pCallback; - break; - - case HAL_SPI_ERROR_CB_ID : - hspi->ErrorCallback = pCallback; - break; - - case HAL_SPI_ABORT_CB_ID : - hspi->AbortCpltCallback = pCallback; - break; - - case HAL_SPI_MSPINIT_CB_ID : - hspi->MspInitCallback = pCallback; - break; - - case HAL_SPI_MSPDEINIT_CB_ID : - hspi->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SPI_STATE_RESET == hspi->State) - { - switch (CallbackID) - { - case HAL_SPI_MSPINIT_CB_ID : - hspi->MspInitCallback = pCallback; - break; - - case HAL_SPI_MSPDEINIT_CB_ID : - hspi->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hspi); - return status; -} - -/** - * @brief Unregister an SPI Callback - * SPI callback is redirected to the weak predefined callback - * @param hspi Pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI. - * @param CallbackID ID of the callback to be unregistered - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hspi); - - if (HAL_SPI_STATE_READY == hspi->State) - { - switch (CallbackID) - { - case HAL_SPI_TX_COMPLETE_CB_ID : - hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_SPI_RX_COMPLETE_CB_ID : - hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - - case HAL_SPI_TX_RX_COMPLETE_CB_ID : - hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ - break; - - case HAL_SPI_TX_HALF_COMPLETE_CB_ID : - hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - break; - - case HAL_SPI_RX_HALF_COMPLETE_CB_ID : - hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - break; - - case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : - hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ - break; - - case HAL_SPI_ERROR_CB_ID : - hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_SPI_ABORT_CB_ID : - hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_SPI_MSPINIT_CB_ID : - hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_SPI_MSPDEINIT_CB_ID : - hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SPI_STATE_RESET == hspi->State) - { - switch (CallbackID) - { - case HAL_SPI_MSPINIT_CB_ID : - hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_SPI_MSPDEINIT_CB_ID : - hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hspi); - return status; -} -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup SPI_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the SPI - data transfers. - - [..] The SPI supports master and slave mode : - - (#) There are two modes of transfer: - (++) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode: The communication is performed using Interrupts - or DMA, These APIs return the HAL status. - The end of the data processing will be indicated through the - dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks - will be executed respectively at the end of the transmit or Receive process - The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected - - (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) - exist for 1Line (simplex) and 2Lines (full duplex) modes. - -@endverbatim - * @{ - */ - -/** - * @brief Transmit an amount of data in blocking mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - HAL_StatusTypeDef errorcode = HAL_OK; - uint16_t initial_TxXferCount; - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - initial_TxXferCount = Size; - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->pRxBuffPtr = (uint8_t *)NULL; - hspi->RxXferSize = 0U; - hspi->RxXferCount = 0U; - hspi->TxISR = NULL; - hspi->RxISR = NULL; - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_TX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Transmit data in 16 Bit mode */ - if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) - { - if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - } - /* Transmit data in 16 Bit mode */ - while (hspi->TxXferCount > 0U) - { - /* Wait until TXE flag is set to send data */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - } - else - { - /* Timeout management */ - if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - } - /* Transmit data in 8 Bit mode */ - else - { - if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) - { - *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint8_t); - hspi->TxXferCount--; - } - while (hspi->TxXferCount > 0U) - { - /* Wait until TXE flag is set to send data */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) - { - *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint8_t); - hspi->TxXferCount--; - } - else - { - /* Timeout management */ - if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - } -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_FLAG; - } - - /* Clear overrun flag in 2 Lines communication mode because received is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - errorcode = HAL_ERROR; - } - -error: - hspi->State = HAL_SPI_STATE_READY; - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Receive an amount of data in blocking mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be received - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ -#if (USE_SPI_CRC != 0U) - __IO uint32_t tmpreg = 0U; -#endif /* USE_SPI_CRC */ - uint32_t tickstart; - HAL_StatusTypeDef errorcode = HAL_OK; - - if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) - { - hspi->State = HAL_SPI_STATE_BUSY_RX; - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pRxBuffPtr = (uint8_t *)pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->pTxBuffPtr = (uint8_t *)NULL; - hspi->TxXferSize = 0U; - hspi->TxXferCount = 0U; - hspi->RxISR = NULL; - hspi->TxISR = NULL; - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - /* this is done to handle the CRCNEXT before the latest data */ - hspi->RxXferCount--; - } -#endif /* USE_SPI_CRC */ - - /* Configure communication direction: 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_RX(hspi); - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Receive data in 8 Bit mode */ - if (hspi->Init.DataSize == SPI_DATASIZE_8BIT) - { - /* Transfer loop */ - while (hspi->RxXferCount > 0U) - { - /* Check the RXNE flag */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) - { - /* read the received data */ - (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; - hspi->pRxBuffPtr += sizeof(uint8_t); - hspi->RxXferCount--; - } - else - { - /* Timeout management */ - if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - } - else - { - /* Transfer loop */ - while (hspi->RxXferCount > 0U) - { - /* Check the RXNE flag */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) - { - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount--; - } - else - { - /* Timeout management */ - if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - } - -#if (USE_SPI_CRC != 0U) - /* Handle the CRC Transmission */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* freeze the CRC before the latest data */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - - /* Read the latest data */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) - { - /* the latest data has not been received */ - errorcode = HAL_TIMEOUT; - goto error; - } - - /* Receive last data in 16 Bit mode */ - if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) - { - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; - } - /* Receive last data in 8 Bit mode */ - else - { - (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; - } - - /* Wait the CRC data */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - errorcode = HAL_TIMEOUT; - goto error; - } - - /* Read CRC to Flush DR and RXNE flag */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - } -#endif /* USE_SPI_CRC */ - - /* Check the end of the transaction */ - if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_FLAG; - } - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } -#endif /* USE_SPI_CRC */ - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - errorcode = HAL_ERROR; - } - -error : - hspi->State = HAL_SPI_STATE_READY; - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit and Receive an amount of data in blocking mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData pointer to transmission data buffer - * @param pRxData pointer to reception data buffer - * @param Size amount of data to be sent and received - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, - uint32_t Timeout) -{ - uint16_t initial_TxXferCount; - uint32_t tmp_mode; - HAL_SPI_StateTypeDef tmp_state; - uint32_t tickstart; -#if (USE_SPI_CRC != 0U) - __IO uint32_t tmpreg = 0U; -#endif /* USE_SPI_CRC */ - - /* Variable used to alternate Rx and Tx during transfer */ - uint32_t txallowed = 1U; - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* Init temporary variables */ - tmp_state = hspi->State; - tmp_mode = hspi->Init.Mode; - initial_TxXferCount = Size; - - if (!((tmp_state == HAL_SPI_STATE_READY) || \ - ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if (hspi->State != HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Set the transaction information */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pRxBuffPtr = (uint8_t *)pRxData; - hspi->RxXferCount = Size; - hspi->RxXferSize = Size; - hspi->pTxBuffPtr = (uint8_t *)pTxData; - hspi->TxXferCount = Size; - hspi->TxXferSize = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = NULL; - hspi->TxISR = NULL; - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Transmit and Receive data in 16 Bit mode */ - if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) - { - if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - } - while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) - { - /* Check TXE flag */ - if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - /* Next Data is a reception (Rx). Tx not allowed */ - txallowed = 0U; - -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - } - - /* Check RXNE flag */ - if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) - { - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount--; - /* Next Data is a Transmission (Tx). Tx is allowed */ - txallowed = 1U; - } - if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - /* Transmit and Receive data in 8 Bit mode */ - else - { - if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) - { - *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint8_t); - hspi->TxXferCount--; - } - while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) - { - /* Check TXE flag */ - if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) - { - *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr++; - hspi->TxXferCount--; - /* Next Data is a reception (Rx). Tx not allowed */ - txallowed = 0U; - -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - } - - /* Wait until RXNE flag is reset */ - if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) - { - (*(uint8_t *)hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->pRxBuffPtr++; - hspi->RxXferCount--; - /* Next Data is a Transmission (Tx). Tx is allowed */ - txallowed = 1U; - } - if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - -#if (USE_SPI_CRC != 0U) - /* Read CRC from DR to close CRC calculation process */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Wait until TXE flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - errorcode = HAL_TIMEOUT; - goto error; - } - /* Read CRC */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - } - - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - /* Clear CRC Flag */ - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - - errorcode = HAL_ERROR; - } -#endif /* USE_SPI_CRC */ - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) - { - errorcode = HAL_ERROR; - hspi->ErrorCode = HAL_SPI_ERROR_FLAG; - goto error; - } - - /* Clear overrun flag in 2 Lines communication mode because received is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - -error : - hspi->State = HAL_SPI_STATE_READY; - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with Interrupt. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /* Init field not used in handle to zero */ - hspi->pRxBuffPtr = (uint8_t *)NULL; - hspi->RxXferSize = 0U; - hspi->RxXferCount = 0U; - hspi->RxISR = NULL; - - /* Set the function for IT treatment */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - hspi->TxISR = SPI_TxISR_16BIT; - } - else - { - hspi->TxISR = SPI_TxISR_8BIT; - } - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_TX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Enable TXE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); - - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - -error : - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Receive an amount of data in non-blocking mode with Interrupt. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - - if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) - { - hspi->State = HAL_SPI_STATE_BUSY_RX; - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pRxBuffPtr = (uint8_t *)pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /* Init field not used in handle to zero */ - hspi->pTxBuffPtr = (uint8_t *)NULL; - hspi->TxXferSize = 0U; - hspi->TxXferCount = 0U; - hspi->TxISR = NULL; - - /* Set the function for IT treatment */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - hspi->RxISR = SPI_RxISR_16BIT; - } - else - { - hspi->RxISR = SPI_RxISR_8BIT; - } - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_RX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Enable TXE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - /* Note : The SPI must be enabled after unlocking current process - to avoid the risk of SPI interrupt handle execution before current - process unlock */ - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - -error : - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData pointer to transmission data buffer - * @param pRxData pointer to reception data buffer - * @param Size amount of data to be sent and received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) -{ - uint32_t tmp_mode; - HAL_SPI_StateTypeDef tmp_state; - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process locked */ - __HAL_LOCK(hspi); - - /* Init temporary variables */ - tmp_state = hspi->State; - tmp_mode = hspi->Init.Mode; - - if (!((tmp_state == HAL_SPI_STATE_READY) || \ - ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if (hspi->State != HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Set the transaction information */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pTxData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - hspi->pRxBuffPtr = (uint8_t *)pRxData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /* Set the function for IT treatment */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - hspi->RxISR = SPI_2linesRxISR_16BIT; - hspi->TxISR = SPI_2linesTxISR_16BIT; - } - else - { - hspi->RxISR = SPI_2linesRxISR_8BIT; - hspi->TxISR = SPI_2linesTxISR_8BIT; - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Enable TXE, RXNE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - -error : - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with DMA. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check tx dma handle */ - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /* Init field not used in handle to zero */ - hspi->pRxBuffPtr = (uint8_t *)NULL; - hspi->TxISR = NULL; - hspi->RxISR = NULL; - hspi->RxXferSize = 0U; - hspi->RxXferCount = 0U; - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_TX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Set the SPI TxDMA Half transfer complete callback */ - hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; - - /* Set the SPI TxDMA transfer complete callback */ - hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; - - /* Set the DMA error callback */ - hspi->hdmatx->XferErrorCallback = SPI_DMAError; - - /* Set the DMA AbortCpltCallback */ - hspi->hdmatx->XferAbortCallback = NULL; - - /* Enable the Tx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, - hspi->TxXferCount)) - { - /* Update SPI error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - - hspi->State = HAL_SPI_STATE_READY; - goto error; - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Enable the SPI Error Interrupt Bit */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); - - /* Enable Tx DMA Request */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); - -error : - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Receive an amount of data in non-blocking mode with DMA. - * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @note When the CRC feature is enabled the pData Length must be Size + 1. - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check rx dma handle */ - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); - - if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) - { - hspi->State = HAL_SPI_STATE_BUSY_RX; - - /* Check tx dma handle */ - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); - - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pRxBuffPtr = (uint8_t *)pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = NULL; - hspi->TxISR = NULL; - hspi->TxXferSize = 0U; - hspi->TxXferCount = 0U; - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_RX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Set the SPI RxDMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; - - /* Set the SPI Rx DMA transfer complete callback */ - hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; - - /* Set the DMA error callback */ - hspi->hdmarx->XferErrorCallback = SPI_DMAError; - - /* Set the DMA AbortCpltCallback */ - hspi->hdmarx->XferAbortCallback = NULL; - - /* Enable the Rx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, - hspi->RxXferCount)) - { - /* Update SPI error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - - hspi->State = HAL_SPI_STATE_READY; - goto error; - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Enable the SPI Error Interrupt Bit */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); - - /* Enable Rx DMA Request */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); - -error: - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData pointer to transmission data buffer - * @param pRxData pointer to reception data buffer - * @note When the CRC feature is enabled the pRxData Length must be Size + 1 - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size) -{ - uint32_t tmp_mode; - HAL_SPI_StateTypeDef tmp_state; - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check rx & tx dma handles */ - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process locked */ - __HAL_LOCK(hspi); - - /* Init temporary variables */ - tmp_state = hspi->State; - tmp_mode = hspi->Init.Mode; - - if (!((tmp_state == HAL_SPI_STATE_READY) || - ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if (hspi->State != HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Set the transaction information */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pTxData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - hspi->pRxBuffPtr = (uint8_t *)pRxData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /* Init field not used in handle to zero */ - hspi->RxISR = NULL; - hspi->TxISR = NULL; - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ - if (hspi->State == HAL_SPI_STATE_BUSY_RX) - { - /* Set the SPI Rx DMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; - hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; - } - else - { - /* Set the SPI Tx/Rx DMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; - hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; - } - - /* Set the DMA error callback */ - hspi->hdmarx->XferErrorCallback = SPI_DMAError; - - /* Set the DMA AbortCpltCallback */ - hspi->hdmarx->XferAbortCallback = NULL; - - /* Enable the Rx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, - hspi->RxXferCount)) - { - /* Update SPI error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - - hspi->State = HAL_SPI_STATE_READY; - goto error; - } - - /* Enable Rx DMA Request */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); - - /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing - is performed in DMA reception complete callback */ - hspi->hdmatx->XferHalfCpltCallback = NULL; - hspi->hdmatx->XferCpltCallback = NULL; - hspi->hdmatx->XferErrorCallback = NULL; - hspi->hdmatx->XferAbortCallback = NULL; - - /* Enable the Tx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, - hspi->TxXferCount)) - { - /* Update SPI error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - - hspi->State = HAL_SPI_STATE_READY; - goto error; - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - /* Enable the SPI Error Interrupt Bit */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); - - /* Enable Tx DMA Request */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); - -error : - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Abort ongoing transfer (blocking mode). - * @param hspi SPI handle. - * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), - * started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SPI Interrupts (depending of transfer direction) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) -{ - HAL_StatusTypeDef errorcode; - __IO uint32_t count; - __IO uint32_t resetcount; - - /* Initialized local variable */ - errorcode = HAL_OK; - resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - count = resetcount; - - /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); - - /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) - { - hspi->TxISR = SPI_AbortTx_ISR; - /* Wait HAL_SPI_STATE_ABORT state */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (hspi->State != HAL_SPI_STATE_ABORT); - /* Reset Timeout Counter */ - count = resetcount; - } - - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) - { - hspi->RxISR = SPI_AbortRx_ISR; - /* Wait HAL_SPI_STATE_ABORT state */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (hspi->State != HAL_SPI_STATE_ABORT); - /* Reset Timeout Counter */ - count = resetcount; - } - - /* Disable the SPI DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) - { - /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ - if (hspi->hdmatx != NULL) - { - /* Set the SPI DMA Abort callback : - will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ - hspi->hdmatx->XferAbortCallback = NULL; - - /* Abort DMA Tx Handle linked to SPI Peripheral */ - if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Disable Tx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN)); - - /* Wait until TXE flag is set */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET); - } - } - - /* Disable the SPI DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) - { - /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ - if (hspi->hdmarx != NULL) - { - /* Set the SPI DMA Abort callback : - will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ - hspi->hdmarx->XferAbortCallback = NULL; - - /* Abort DMA Rx Handle linked to SPI Peripheral */ - if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Disable peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Disable Rx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN)); - } - } - /* Reset Tx and Rx transfer counters */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Check error during Abort procedure */ - if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) - { - /* return HAL_Error in case of error during Abort procedure */ - errorcode = HAL_ERROR; - } - else - { - /* Reset errorCode */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - } - - /* Clear the Error flags in the SR register */ - __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); - - /* Restore hspi->state to ready */ - hspi->State = HAL_SPI_STATE_READY; - - return errorcode; -} - -/** - * @brief Abort ongoing transfer (Interrupt mode). - * @param hspi SPI handle. - * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), - * started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SPI Interrupts (depending of transfer direction) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) -{ - HAL_StatusTypeDef errorcode; - uint32_t abortcplt ; - __IO uint32_t count; - __IO uint32_t resetcount; - - /* Initialized local variable */ - errorcode = HAL_OK; - abortcplt = 1U; - resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - count = resetcount; - - /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); - - /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) - { - hspi->TxISR = SPI_AbortTx_ISR; - /* Wait HAL_SPI_STATE_ABORT state */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (hspi->State != HAL_SPI_STATE_ABORT); - /* Reset Timeout Counter */ - count = resetcount; - } - - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) - { - hspi->RxISR = SPI_AbortRx_ISR; - /* Wait HAL_SPI_STATE_ABORT state */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (hspi->State != HAL_SPI_STATE_ABORT); - /* Reset Timeout Counter */ - count = resetcount; - } - - /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised - before any call to DMA Abort functions */ - /* DMA Tx Handle is valid */ - if (hspi->hdmatx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) - { - hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; - } - else - { - hspi->hdmatx->XferAbortCallback = NULL; - } - } - /* DMA Rx Handle is valid */ - if (hspi->hdmarx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) - { - hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; - } - else - { - hspi->hdmarx->XferAbortCallback = NULL; - } - } - - /* Disable the SPI DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) - { - /* Abort the SPI DMA Tx Stream/Channel */ - if (hspi->hdmatx != NULL) - { - /* Abort DMA Tx Handle linked to SPI Peripheral */ - if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) - { - hspi->hdmatx->XferAbortCallback = NULL; - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - else - { - abortcplt = 0U; - } - } - } - /* Disable the SPI DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) - { - /* Abort the SPI DMA Rx Stream/Channel */ - if (hspi->hdmarx != NULL) - { - /* Abort DMA Rx Handle linked to SPI Peripheral */ - if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) - { - hspi->hdmarx->XferAbortCallback = NULL; - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - else - { - abortcplt = 0U; - } - } - } - - if (abortcplt == 1U) - { - /* Reset Tx and Rx transfer counters */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Check error during Abort procedure */ - if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) - { - /* return HAL_Error in case of error during Abort procedure */ - errorcode = HAL_ERROR; - } - else - { - /* Reset errorCode */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - } - - /* Clear the Error flags in the SR register */ - __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); - - /* Restore hspi->State to Ready */ - hspi->State = HAL_SPI_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->AbortCpltCallback(hspi); -#else - HAL_SPI_AbortCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - - return errorcode; -} - -/** - * @brief Pause the DMA Transfer. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) -{ - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Disable the SPI DMA Tx & Rx requests */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief Resume the DMA Transfer. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) -{ - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Enable the SPI DMA Tx & Rx requests */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief Stop the DMA Transfer. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - /* The Lock is not implemented on this API to allow the user application - to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): - when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated - and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() - */ - - /* Abort the SPI DMA tx Stream/Channel */ - if (hspi->hdmatx != NULL) - { - if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - /* Abort the SPI DMA rx Stream/Channel */ - if (hspi->hdmarx != NULL) - { - if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - /* Disable the SPI DMA Tx & Rx requests */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - hspi->State = HAL_SPI_STATE_READY; - return errorcode; -} - -/** - * @brief Handle SPI interrupt request. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval None - */ -void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) -{ - uint32_t itsource = hspi->Instance->CR2; - uint32_t itflag = hspi->Instance->SR; - - /* SPI in mode Receiver ----------------------------------------------------*/ - if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) && - (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET)) - { - hspi->RxISR(hspi); - return; - } - - /* SPI in mode Transmitter -------------------------------------------------*/ - if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET)) - { - hspi->TxISR(hspi); - return; - } - - /* SPI in Error Treatment --------------------------------------------------*/ - if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) - || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) - { - /* SPI Overrun error interrupt occurred ----------------------------------*/ - if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) - { - if (hspi->State != HAL_SPI_STATE_BUSY_TX) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - else - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - return; - } - } - - /* SPI Mode Fault error interrupt occurred -------------------------------*/ - if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); - __HAL_SPI_CLEAR_MODFFLAG(hspi); - } - - /* SPI Frame error interrupt occurred ------------------------------------*/ - if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); - __HAL_SPI_CLEAR_FREFLAG(hspi); - } - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Disable all interrupts */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); - - hspi->State = HAL_SPI_STATE_READY; - /* Disable the SPI DMA requests if enabled */ - if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN))) - { - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); - - /* Abort the SPI DMA Rx channel */ - if (hspi->hdmarx != NULL) - { - /* Set the SPI DMA Abort callback : - will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ - hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; - if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - } - } - /* Abort the SPI DMA Tx channel */ - if (hspi->hdmatx != NULL) - { - /* Set the SPI DMA Abort callback : - will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ - hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; - if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - } - } - } - else - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - } - return; - } -} - -/** - * @brief Tx Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_TxCpltCallback should be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_RxCpltCallback should be implemented in the user file - */ -} - -/** - * @brief Tx and Rx Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_TxRxCpltCallback should be implemented in the user file - */ -} - -/** - * @brief Tx Half Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_TxHalfCpltCallback should be implemented in the user file - */ -} - -/** - * @brief Rx Half Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file - */ -} - -/** - * @brief Tx and Rx Half Transfer callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file - */ -} - -/** - * @brief SPI error callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_ErrorCallback should be implemented in the user file - */ - /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes - and user can use HAL_SPI_GetError() API to check the latest error occurred - */ -} - -/** - * @brief SPI Abort Complete callback. - * @param hspi SPI handle. - * @retval None - */ -__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_AbortCpltCallback can be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief SPI control functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the SPI. - (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral - (+) HAL_SPI_GetError() check in run-time Errors occurring during communication -@endverbatim - * @{ - */ - -/** - * @brief Return the SPI handle state. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval SPI state - */ -HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) -{ - /* Return SPI handle state */ - return hspi->State; -} - -/** - * @brief Return the SPI error code. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval SPI error code in bitmap format - */ -uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) -{ - /* Return SPI ErrorCode */ - return hspi->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup SPI_Private_Functions - * @brief Private functions - * @{ - */ - -/** - * @brief DMA SPI transmit process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tickstart; - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* DMA Normal Mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != DMA_SxCR_CIRC) - { - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); - - /* Disable Tx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - - /* Clear overrun flag in 2 Lines communication mode because received data is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - hspi->TxXferCount = 0U; - hspi->State = HAL_SPI_STATE_READY; - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - return; - } - } - /* Call user Tx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxCpltCallback(hspi); -#else - HAL_SPI_TxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI receive process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tickstart; -#if (USE_SPI_CRC != 0U) - __IO uint32_t tmpreg = 0U; -#endif /* USE_SPI_CRC */ - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* DMA Normal Mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != DMA_SxCR_CIRC) - { - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); - -#if (USE_SPI_CRC != 0U) - /* CRC handling */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Wait until RXNE flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - } - /* Read CRC */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - } -#endif /* USE_SPI_CRC */ - - /* Check if we are in Master RX 2 line mode */ - if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) - { - /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - } - else - { - /* Normal case */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); - } - - /* Check the end of the transaction */ - if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_FLAG; - } - - hspi->RxXferCount = 0U; - hspi->State = HAL_SPI_STATE_READY; - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } -#endif /* USE_SPI_CRC */ - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - return; - } - } - /* Call user Rx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->RxCpltCallback(hspi); -#else - HAL_SPI_RxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI transmit receive process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tickstart; -#if (USE_SPI_CRC != 0U) - __IO uint32_t tmpreg = 0U; -#endif /* USE_SPI_CRC */ - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* DMA Normal Mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != DMA_SxCR_CIRC) - { - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); - -#if (USE_SPI_CRC != 0U) - /* CRC handling */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Wait the CRC data */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - } - /* Read CRC to Flush DR and RXNE flag */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - } -#endif /* USE_SPI_CRC */ - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - - /* Disable Rx/Tx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - - hspi->TxXferCount = 0U; - hspi->RxXferCount = 0U; - hspi->State = HAL_SPI_STATE_READY; - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } -#endif /* USE_SPI_CRC */ - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - return; - } - } - /* Call user TxRx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxRxCpltCallback(hspi); -#else - HAL_SPI_TxRxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI half transmit process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user Tx half complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxHalfCpltCallback(hspi); -#else - HAL_SPI_TxHalfCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI half receive process complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user Rx half complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->RxHalfCpltCallback(hspi); -#else - HAL_SPI_RxHalfCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI half transmit receive process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user TxRx half complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxRxHalfCpltCallback(hspi); -#else - HAL_SPI_TxRxHalfCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI communication error callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAError(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Stop the disable DMA transfer on SPI side */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - hspi->State = HAL_SPI_STATE_READY; - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI communication abort callback, when initiated by HAL services on Error - * (To be called at end of DMA Abort procedure following error occurrence). - * @param hdma DMA handle. - * @retval None - */ -static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI Tx communication abort callback, when initiated by user - * (To be called at end of DMA Tx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Rx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - __IO uint32_t count; - - hspi->hdmatx->XferAbortCallback = NULL; - count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - - /* Disable Tx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); - - /* Wait until TXE flag is set */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET); - - /* Check if an Abort process is still ongoing */ - if (hspi->hdmarx != NULL) - { - if (hspi->hdmarx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Check no error during Abort procedure */ - if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) - { - /* Reset errorCode */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - } - - /* Clear the Error flags in the SR register */ - __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); - - /* Restore hspi->State to Ready */ - hspi->State = HAL_SPI_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->AbortCpltCallback(hspi); -#else - HAL_SPI_AbortCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI Rx communication abort callback, when initiated by user - * (To be called at end of DMA Rx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Tx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable SPI Peripheral */ - __HAL_SPI_DISABLE(hspi); - - hspi->hdmarx->XferAbortCallback = NULL; - - /* Disable Rx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); - - /* Check Busy flag */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - } - - /* Check if an Abort process is still ongoing */ - if (hspi->hdmatx != NULL) - { - if (hspi->hdmatx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Check no error during Abort procedure */ - if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) - { - /* Reset errorCode */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - } - - /* Clear the Error flags in the SR register */ - __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); - - /* Restore hspi->State to Ready */ - hspi->State = HAL_SPI_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->AbortCpltCallback(hspi); -#else - HAL_SPI_AbortCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Receive data in 8bit mode */ - *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR); - hspi->pRxBuffPtr++; - hspi->RxXferCount--; - - /* Check end of the reception */ - if (hspi->RxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->RxISR = SPI_2linesRxISR_8BITCRC; - return; - } -#endif /* USE_SPI_CRC */ - - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - if (hspi->TxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} - -#if (USE_SPI_CRC != 0U) -/** - * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) -{ - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; - - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - /* Read 8bit CRC to flush Data Register */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - if (hspi->TxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } -} -#endif /* USE_SPI_CRC */ - -/** - * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi) -{ - *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr++; - hspi->TxXferCount--; - - /* Check the end of the transmission */ - if (hspi->TxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Set CRC Next Bit to send CRC */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); - return; - } -#endif /* USE_SPI_CRC */ - - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); - - if (hspi->RxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} - -/** - * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Receive data in 16 Bit mode */ - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount--; - - if (hspi->RxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->RxISR = SPI_2linesRxISR_16BITCRC; - return; - } -#endif /* USE_SPI_CRC */ - - /* Disable RXNE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); - - if (hspi->TxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} - -#if (USE_SPI_CRC != 0U) -/** - * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) -{ - __IO uint32_t tmpreg = 0U; - - /* Read 16bit CRC to flush Data Register */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - - /* Disable RXNE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); - - SPI_CloseRxTx_ISR(hspi); -} -#endif /* USE_SPI_CRC */ - -/** - * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Transmit data in 16 Bit mode */ - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - - /* Enable CRC Transmission */ - if (hspi->TxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Set CRC Next Bit to send CRC */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); - return; - } -#endif /* USE_SPI_CRC */ - - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); - - if (hspi->RxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} - -#if (USE_SPI_CRC != 0U) -/** - * @brief Manage the CRC 8-bit receive in Interrupt context. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) -{ - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; - - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - /* Read 8bit CRC to flush Data Register */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - - SPI_CloseRx_ISR(hspi); -} -#endif /* USE_SPI_CRC */ - -/** - * @brief Manage the receive 8-bit in Interrupt context. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) -{ - *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR); - hspi->pRxBuffPtr++; - hspi->RxXferCount--; - -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - - if (hspi->RxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->RxISR = SPI_RxISR_8BITCRC; - return; - } -#endif /* USE_SPI_CRC */ - SPI_CloseRx_ISR(hspi); - } -} - -#if (USE_SPI_CRC != 0U) -/** - * @brief Manage the CRC 16-bit receive in Interrupt context. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) -{ - __IO uint32_t tmpreg = 0U; - - /* Read 16bit CRC to flush Data Register */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - SPI_CloseRx_ISR(hspi); -} -#endif /* USE_SPI_CRC */ - -/** - * @brief Manage the 16-bit receive in Interrupt context. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) -{ - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount--; - -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - - if (hspi->RxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->RxISR = SPI_RxISR_16BITCRC; - return; - } -#endif /* USE_SPI_CRC */ - SPI_CloseRx_ISR(hspi); - } -} - -/** - * @brief Handle the data 8-bit transmit in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi) -{ - *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr++; - hspi->TxXferCount--; - - if (hspi->TxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Enable CRC Transmission */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - SPI_CloseTx_ISR(hspi); - } -} - -/** - * @brief Handle the data 16-bit transmit in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Transmit data in 16 Bit mode */ - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - - if (hspi->TxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Enable CRC Transmission */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - SPI_CloseTx_ISR(hspi); - } -} - -/** - * @brief Handle SPI Communication Timeout. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param Flag SPI flag to check - * @param State flag state to check - * @param Timeout Timeout duration - * @param Tickstart tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, - uint32_t Timeout, uint32_t Tickstart) -{ - __IO uint32_t count; - uint32_t tmp_timeout; - uint32_t tmp_tickstart; - - /* Adjust Timeout value in case of end of transfer */ - tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); - tmp_tickstart = HAL_GetTick(); - - /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ - count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U); - - while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) - { - /* Disable the SPI and reset the CRC: the CRC value should be cleared - on both master and slave sides in order to resynchronize the master - and slave for their respective CRC calculation */ - - /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); - - if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) - || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - } - - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - hspi->State = HAL_SPI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_TIMEOUT; - } - /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ - if (count == 0U) - { - tmp_timeout = 0U; - } - count--; - } - } - - return HAL_OK; -} - -/** - * @brief Handle the check of the RX transaction complete. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param Timeout Timeout duration - * @param Tickstart tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) -{ - if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) - || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - } - - /* Erratasheet: BSY bit may stay high at the end of a data transfer in Slave mode */ - if (hspi->Init.Mode == SPI_MODE_MASTER) - { - if (hspi->Init.Direction != SPI_DIRECTION_2LINES_RXONLY) - { - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - } - else - { - /* Wait the RXNE reset */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - } - } - else - { - /* Wait the RXNE reset */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Handle the check of the RXTX or TX transaction complete. - * @param hspi SPI handle - * @param Timeout Timeout duration - * @param Tickstart tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) -{ - /* Timeout in µs */ - __IO uint32_t count = SPI_BSY_FLAG_WORKAROUND_TIMEOUT * (SystemCoreClock / 24U / 1000000U); - /* Erratasheet: BSY bit may stay high at the end of a data transfer in Slave mode */ - if (hspi->Init.Mode == SPI_MODE_MASTER) - { - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - } - else - { - /* Wait BSY flag during 1 Byte time transfer in case of Full-Duplex and Tx transfer - * If Timeout is reached, the transfer is considered as finish. - * User have to calculate the timeout value to fit with the time of 1 byte transfer. - * This time is directly link with the SPI clock from Master device. - */ - do - { - if (count == 0U) - { - break; - } - count--; - } while (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_BSY) != RESET); - } - - return HAL_OK; -} - -/** - * @brief Handle the end of the RXTX transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) -{ - uint32_t tickstart; - __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); - - /* Wait until TXE flag is set */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - break; - } - count--; - } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET); - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - - /* Clear overrun flag in 2 Lines communication mode because received is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) - { - hspi->State = HAL_SPI_STATE_READY; - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { -#endif /* USE_SPI_CRC */ - if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) - { - if (hspi->State == HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_READY; - /* Call user Rx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->RxCpltCallback(hspi); -#else - HAL_SPI_RxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { - hspi->State = HAL_SPI_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxRxCpltCallback(hspi); -#else - HAL_SPI_TxRxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - } - else - { - hspi->State = HAL_SPI_STATE_READY; - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } -#if (USE_SPI_CRC != 0U) - } -#endif /* USE_SPI_CRC */ -} - -/** - * @brief Handle the end of the RX transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) -{ - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - /* Check the end of the transaction */ - if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - - /* Clear overrun flag in 2 Lines communication mode because received is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - hspi->State = HAL_SPI_STATE_READY; - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { -#endif /* USE_SPI_CRC */ - if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) - { - /* Call user Rx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->RxCpltCallback(hspi); -#else - HAL_SPI_RxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } -#if (USE_SPI_CRC != 0U) - } -#endif /* USE_SPI_CRC */ -} - -/** - * @brief Handle the end of the TX transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi) -{ - uint32_t tickstart; - __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* Wait until TXE flag is set */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - break; - } - count--; - } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET); - - /* Disable TXE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - - /* Clear overrun flag in 2 Lines communication mode because received is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - hspi->State = HAL_SPI_STATE_READY; - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { - /* Call user Rx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxCpltCallback(hspi); -#else - HAL_SPI_TxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Handle abort a Rx transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) -{ - __IO uint32_t tmpreg = 0U; - __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - - /* Wait until TXE flag is set */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET); - - /* Disable SPI Peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE | SPI_CR2_RXNEIE | SPI_CR2_ERRIE)); - - /* Flush Data Register by a blank read */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - - hspi->State = HAL_SPI_STATE_ABORT; -} - -/** - * @brief Handle abort a Tx or Rx/Tx transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) -{ - /* Disable TXEIE interrupt */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE)); - - /* Disable SPI Peripheral */ - __HAL_SPI_DISABLE(hspi); - - hspi->State = HAL_SPI_STATE_ABORT; -} - -/** - * @} - */ - -#endif /* HAL_SPI_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c deleted file mode 100644 index 1ca1781..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c +++ /dev/null @@ -1,7621 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim.c - * @author MCD Application Team - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer (TIM) peripheral: - * + TIM Time Base Initialization - * + TIM Time Base Start - * + TIM Time Base Start Interruption - * + TIM Time Base Start DMA - * + TIM Output Compare/PWM Initialization - * + TIM Output Compare/PWM Channel Configuration - * + TIM Output Compare/PWM Start - * + TIM Output Compare/PWM Start Interruption - * + TIM Output Compare/PWM Start DMA - * + TIM Input Capture Initialization - * + TIM Input Capture Channel Configuration - * + TIM Input Capture Start - * + TIM Input Capture Start Interruption - * + TIM Input Capture Start DMA - * + TIM One Pulse Initialization - * + TIM One Pulse Channel Configuration - * + TIM One Pulse Start - * + TIM Encoder Interface Initialization - * + TIM Encoder Interface Start - * + TIM Encoder Interface Start Interruption - * + TIM Encoder Interface Start DMA - * + Commutation Event configuration with Interruption and DMA - * + TIM OCRef clear configuration - * + TIM External Clock configuration - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### TIMER Generic features ##### - ============================================================================== - [..] The Timer features include: - (#) 16-bit up, down, up/down auto-reload counter. - (#) 16-bit programmable prescaler allowing dividing (also on the fly) the - counter clock frequency either by any factor between 1 and 65536. - (#) Up to 4 independent channels for: - (++) Input Capture - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to interconnect - several timers together. - (#) Supports incremental encoder for positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending on the selected feature: - (++) Time Base : HAL_TIM_Base_MspInit() - (++) Input Capture : HAL_TIM_IC_MspInit() - (++) Output Compare : HAL_TIM_OC_MspInit() - (++) PWM generation : HAL_TIM_PWM_MspInit() - (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() - (++) Encoder mode output : HAL_TIM_Encoder_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - Initialization function of this driver: - (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base - (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an - Output Compare signal. - (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a - PWM signal. - (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an - external signal. - (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer - in One Pulse Mode. - (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. - - (#) Activate the TIM peripheral using one of the start functions depending from the feature used: - (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() - (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() - (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() - (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() - (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() - (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). - - (#) The DMA Burst is managed with the two following functions: - HAL_TIM_DMABurst_WriteStart() - HAL_TIM_DMABurst_ReadStart() - - *** Callback registration *** - ============================================= - - [..] - The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function HAL_TIM_RegisterCallback() to register a callback. - HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, - the Callback ID and a pointer to the user callback function. - - [..] - Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - - [..] - These functions allow to register/unregister following callbacks: - (+) Base_MspInitCallback : TIM Base Msp Init Callback. - (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. - (+) IC_MspInitCallback : TIM IC Msp Init Callback. - (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. - (+) OC_MspInitCallback : TIM OC Msp Init Callback. - (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. - (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. - (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. - (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. - (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. - (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. - (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. - (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. - (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. - (+) PeriodElapsedCallback : TIM Period Elapsed Callback. - (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. - (+) TriggerCallback : TIM Trigger Callback. - (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. - (+) IC_CaptureCallback : TIM Input Capture Callback. - (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. - (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. - (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. - (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. - (+) ErrorCallback : TIM Error Callback. - (+) CommutationCallback : TIM Commutation Callback. - (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. - (+) BreakCallback : TIM Break Callback. - - [..] -By default, after the Init and when the state is HAL_TIM_STATE_RESET -all interrupt callbacks are set to the corresponding weak functions: - examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). - - [..] - Exception done for MspInit and MspDeInit functions that are reset to the legacy weak - functionalities in the Init / DeInit only when these callbacks are null - (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit - keep and use the user MspInit / MspDeInit callbacks(registered beforehand) - - [..] - Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. - Exception done MspInit / MspDeInit that can be registered / unregistered - in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, - thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_TIM_RegisterCallback() before calling DeInit or Init function. - - [..] - When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup TIM TIM - * @brief TIM HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup TIM_Private_Functions - * @{ - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig); -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions - * @brief Time Base functions - * -@verbatim - ============================================================================== - ##### Time Base functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM base. - (+) De-initialize the TIM base. - (+) Start the Time Base. - (+) Stop the Time Base. - (+) Start the Time Base and enable interrupt. - (+) Stop the Time Base and disable interrupt. - (+) Start the Time Base and enable DMA transfer. - (+) Stop the Time Base and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Time base Unit according to the specified - * parameters in the TIM_HandleTypeDef and initialize the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->Base_MspInitCallback == NULL) - { - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->Base_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the Time Base configuration */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Base peripheral - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->Base_MspDeInitCallback == NULL) - { - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - } - /* DeInit the low level hardware */ - htim->Base_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspDeInit could be implemented in the user file - */ -} - - -/** - * @brief Starts the TIM Base generation. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Check the TIM state */ - if (htim->State != HAL_TIM_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in interrupt mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Check the TIM state */ - if (htim->State != HAL_TIM_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Enable the TIM Update interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in interrupt mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Disable the TIM Update interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in DMA mode. - * @param htim TIM Base handle - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - /* Set the TIM state */ - if (htim->State == HAL_TIM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->State == HAL_TIM_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - return HAL_ERROR; - } - - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Update DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in DMA mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); - - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions - * @brief TIM Output Compare functions - * -@verbatim - ============================================================================== - ##### TIM Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Output Compare. - (+) De-initialize the TIM Output Compare. - (+) Start the TIM Output Compare. - (+) Stop the TIM Output Compare. - (+) Start the TIM Output Compare and enable interrupt. - (+) Stop the TIM Output Compare and disable interrupt. - (+) Start the TIM Output Compare and enable DMA transfer. - (+) Stop the TIM Output Compare and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Output Compare according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() - * @param htim TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->OC_MspInitCallback == NULL) - { - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->OC_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the Output Compare */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->OC_MspDeInitCallback == NULL) - { - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - } - /* DeInit the low level hardware */ - htim->OC_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Output Compare MSP. - * @param htim TIM Output Compare handle - * @retval None - */ -__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Output Compare MSP. - * @param htim TIM Output Compare handle - * @retval None - */ -__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Output Compare signal generation. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions - * @brief TIM PWM functions - * -@verbatim - ============================================================================== - ##### TIM PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM PWM. - (+) De-initialize the TIM PWM. - (+) Start the TIM PWM. - (+) Stop the TIM PWM. - (+) Start the TIM PWM and enable interrupt. - (+) Stop the TIM PWM and disable interrupt. - (+) Start the TIM PWM and enable DMA transfer. - (+) Stop the TIM PWM and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM PWM Time Base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() - * @param htim TIM PWM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->PWM_MspInitCallback == NULL) - { - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->PWM_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the PWM */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM PWM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->PWM_MspDeInitCallback == NULL) - { - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - } - /* DeInit the low level hardware */ - htim->PWM_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM PWM MSP. - * @param htim TIM PWM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM PWM MSP. - * @param htim TIM PWM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the PWM signal generation. - * @param htim TIM handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode. - * @param htim TIM PWM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Capture/Compare 3 request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions - * @brief TIM Input Capture functions - * -@verbatim - ============================================================================== - ##### TIM Input Capture functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Input Capture. - (+) De-initialize the TIM Input Capture. - (+) Start the TIM Input Capture. - (+) Stop the TIM Input Capture. - (+) Start the TIM Input Capture and enable interrupt. - (+) Stop the TIM Input Capture and disable interrupt. - (+) Start the TIM Input Capture and enable DMA transfer. - (+) Stop the TIM Input Capture and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Input Capture Time base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() - * @param htim TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->IC_MspInitCallback == NULL) - { - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->IC_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the input capture */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->IC_MspDeInitCallback == NULL) - { - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - } - /* DeInit the low level hardware */ - htim->IC_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Input Capture MSP. - * @param htim TIM Input Capture handle - * @retval None - */ -__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Input Capture MSP. - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Input Capture measurement. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Input Capture measurement in interrupt mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Input Capture measurement in interrupt mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Input Capture measurement in DMA mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - /* Set the TIM channel state */ - if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Input Capture measurement in DMA mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions - * @brief TIM One Pulse functions - * -@verbatim - ============================================================================== - ##### TIM One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM One Pulse. - (+) De-initialize the TIM One Pulse. - (+) Start the TIM One Pulse. - (+) Stop the TIM One Pulse. - (+) Start the TIM One Pulse and enable interrupt. - (+) Stop the TIM One Pulse and disable interrupt. - (+) Start the TIM One Pulse and enable DMA transfer. - (+) Stop the TIM One Pulse and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM One Pulse Time Base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() - * @note When the timer instance is initialized in One Pulse mode, timer - * channels 1 and channel 2 are reserved and cannot be used for other - * purpose. - * @param htim TIM One Pulse handle - * @param OnePulseMode Select the One pulse mode. - * This parameter can be one of the following values: - * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. - * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_OPM_MODE(OnePulseMode)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->OnePulse_MspInitCallback == NULL) - { - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->OnePulse_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OnePulse_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the One Pulse Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Reset the OPM Bit */ - htim->Instance->CR1 &= ~TIM_CR1_OPM; - - /* Configure the OPM Mode */ - htim->Instance->CR1 |= OnePulseMode; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM One Pulse - * @param htim TIM One Pulse handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->OnePulse_MspDeInitCallback == NULL) - { - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - } - /* DeInit the low level hardware */ - htim->OnePulse_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_OnePulse_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM One Pulse MSP. - * @param htim TIM One Pulse handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM One Pulse MSP. - * @param htim TIM One Pulse handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM One Pulse signal generation. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions - * @brief TIM Encoder functions - * -@verbatim - ============================================================================== - ##### TIM Encoder functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Encoder. - (+) De-initialize the TIM Encoder. - (+) Start the TIM Encoder. - (+) Stop the TIM Encoder. - (+) Start the TIM Encoder and enable interrupt. - (+) Stop the TIM Encoder and disable interrupt. - (+) Start the TIM Encoder and enable DMA transfer. - (+) Stop the TIM Encoder and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Encoder Interface and initialize the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() - * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together - * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource - * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa - * @note When the timer instance is initialized in Encoder mode, timer - * channels 1 and channel 2 are reserved and cannot be used for other - * purpose. - * @param htim TIM Encoder Interface handle - * @param sConfig TIM Encoder Interface configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) -{ - uint32_t tmpsmcr; - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); - assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->Encoder_MspInitCallback == NULL) - { - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->Encoder_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_Encoder_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Reset the SMS and ECE bits */ - htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = htim->Instance->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = htim->Instance->CCER; - - /* Set the encoder Mode */ - tmpsmcr |= sConfig->EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); - tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); - - /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ - tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); - tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); - tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); - tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); - tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); - tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - htim->Instance->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - htim->Instance->CCER = tmpccer; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - - -/** - * @brief DeInitializes the TIM Encoder interface - * @param htim TIM Encoder Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->Encoder_MspDeInitCallback == NULL) - { - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - } - /* DeInit the low level hardware */ - htim->Encoder_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Encoder_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Encoder Interface MSP. - * @param htim TIM Encoder Interface handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Encoder Interface MSP. - * @param htim TIM Encoder Interface handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Encoder Interface. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - - /* Enable the encoder interface channels */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - } - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in interrupt mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - - /* Enable the encoder interface channels */ - /* Enable the capture compare Interrupts 1 and/or 2 */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in interrupt mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if (Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - else if (Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 and 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in DMA mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @param pData1 The destination Buffer address for IC1. - * @param pData2 The destination Buffer address for IC2. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, - uint32_t *pData2, uint16_t Length) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData1 == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData2 == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - else - { - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - - default: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in DMA mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if (Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - } - else if (Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 and 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ -/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief TIM IRQ handler management - * -@verbatim - ============================================================================== - ##### IRQ handler management ##### - ============================================================================== - [..] - This section provides Timer IRQ handler function. - -@endverbatim - * @{ - */ -/** - * @brief This function handles TIM interrupts requests. - * @param htim TIM handle - * @retval None - */ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) -{ - /* Capture compare 1 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) - { - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - /* Input capture event */ - if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - } - /* Capture compare 2 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - /* Input capture event */ - if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 3 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - /* Input capture event */ - if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 4 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - /* Input capture event */ - if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* TIM Update event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedCallback(htim); -#else - HAL_TIM_PeriodElapsedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Break input event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->BreakCallback(htim); -#else - HAL_TIMEx_BreakCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Trigger detection event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerCallback(htim); -#else - HAL_TIM_TriggerCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM commutation event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationCallback(htim); -#else - HAL_TIMEx_CommutCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions - * @brief TIM Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. - (+) Configure External Clock source. - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master and the Slave synchronization. - (+) Configure the DMA Burst Mode. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the TIM Output Compare Channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim TIM Output Compare handle - * @param sConfig TIM Output Compare configuration structure - * @param Channel TIM Channels to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, - TIM_OC_InitTypeDef *sConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - - /* Process Locked */ - __HAL_LOCK(htim); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 1 in Output Compare */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 2 in Output Compare */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 3 in Output Compare */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 4 in Output Compare */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - break; - } - - default: - status = HAL_ERROR; - break; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM Input Capture Channels according to the specified - * parameters in the TIM_IC_InitTypeDef. - * @param htim TIM IC handle - * @param sConfig TIM Input Capture configuration structure - * @param Channel TIM Channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); - - /* Process Locked */ - __HAL_LOCK(htim); - - if (Channel == TIM_CHANNEL_1) - { - /* TI1 Configuration */ - TIM_TI1_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->ICPrescaler; - } - else if (Channel == TIM_CHANNEL_2) - { - /* TI2 Configuration */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Set the IC2PSC value */ - htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); - } - else if (Channel == TIM_CHANNEL_3) - { - /* TI3 Configuration */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - TIM_TI3_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC3PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; - - /* Set the IC3PSC value */ - htim->Instance->CCMR2 |= sConfig->ICPrescaler; - } - else if (Channel == TIM_CHANNEL_4) - { - /* TI4 Configuration */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - TIM_TI4_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC4PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; - - /* Set the IC4PSC value */ - htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); - } - else - { - status = HAL_ERROR; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM PWM channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim TIM PWM handle - * @param sConfig TIM PWM configuration structure - * @param Channel TIM Channels to be configured - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, - TIM_OC_InitTypeDef *sConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); - - /* Process Locked */ - __HAL_LOCK(htim); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Configure the Channel 1 in PWM mode */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel1 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Configure the Channel 2 in PWM mode */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel2 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Configure the Channel 3 in PWM mode */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel3 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Configure the Channel 4 in PWM mode */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel4 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; - break; - } - - default: - status = HAL_ERROR; - break; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM One Pulse Channels according to the specified - * parameters in the TIM_OnePulse_InitTypeDef. - * @param htim TIM One Pulse handle - * @param sConfig TIM One Pulse configuration structure - * @param OutputChannel TIM output channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @param InputChannel TIM input Channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @note To output a waveform with a minimum delay user can enable the fast - * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx - * output is forced in response to the edge detection on TIx input, - * without taking in account the comparison. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, - uint32_t OutputChannel, uint32_t InputChannel) -{ - HAL_StatusTypeDef status = HAL_OK; - TIM_OC_InitTypeDef temp1; - - /* Check the parameters */ - assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); - assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); - - if (OutputChannel != InputChannel) - { - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Extract the Output compare configuration from sConfig structure */ - temp1.OCMode = sConfig->OCMode; - temp1.Pulse = sConfig->Pulse; - temp1.OCPolarity = sConfig->OCPolarity; - temp1.OCNPolarity = sConfig->OCNPolarity; - temp1.OCIdleState = sConfig->OCIdleState; - temp1.OCNIdleState = sConfig->OCNIdleState; - - switch (OutputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_OC1_SetConfig(htim->Instance, &temp1); - break; - } - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_OC2_SetConfig(htim->Instance, &temp1); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - switch (InputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1FP1; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI2FP2; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - default: - status = HAL_ERROR; - break; - } - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @note This function should be used only when BurstLength is equal to DMA data transfer length. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) -{ - HAL_StatusTypeDef status; - - status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - - - - return status; -} - -/** - * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @param DataLength Data length. This parameter can be one value - * between 1 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); - - if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) - { - if ((BurstBuffer == NULL) && (BurstLength > 0U)) - { - return HAL_ERROR; - } - else - { - htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_COM: - { - /* Set the DMA commutation callbacks */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_TRIGGER: - { - /* Set the DMA trigger callbacks */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM DMA Burst mode - * @param htim TIM handle - * @param BurstRequestSrc TIM DMA Request sources to disable - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA stream) */ - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - break; - } - case TIM_DMA_CC1: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - case TIM_DMA_CC2: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - case TIM_DMA_CC3: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - case TIM_DMA_CC4: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - case TIM_DMA_COM: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); - break; - } - case TIM_DMA_TRIGGER: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - } - - /* Return function status */ - return status; -} - -/** - * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @note This function should be used only when BurstLength is equal to DMA data transfer length. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) -{ - HAL_StatusTypeDef status; - - status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - - - return status; -} - -/** - * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @param DataLength Data length. This parameter can be one value - * between 1 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); - - if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) - { - if ((BurstBuffer == NULL) && (BurstLength > 0U)) - { - return HAL_ERROR; - } - else - { - htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC3: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC4: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_COM: - { - /* Set the DMA commutation callbacks */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_TRIGGER: - { - /* Set the DMA trigger callbacks */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stop the DMA burst reading - * @param htim TIM handle - * @param BurstRequestSrc TIM DMA Request sources to disable. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA stream) */ - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - break; - } - case TIM_DMA_CC1: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - case TIM_DMA_CC2: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - case TIM_DMA_CC3: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - case TIM_DMA_CC4: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - case TIM_DMA_COM: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); - break; - } - case TIM_DMA_TRIGGER: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - } - - /* Return function status */ - return status; -} - -/** - * @brief Generate a software event - * @param htim TIM handle - * @param EventSource specifies the event source. - * This parameter can be one of the following values: - * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source - * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source - * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source - * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source - * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source - * @arg TIM_EVENTSOURCE_COM: Timer COM event source - * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source - * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source - * @note Basic timers can only generate an update event. - * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. - * @note TIM_EVENTSOURCE_BREAK are relevant only for timer instances - * supporting a break input. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_EVENT_SOURCE(EventSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the event sources */ - htim->Instance->EGR = EventSource; - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configures the OCRef clear feature - * @param htim TIM handle - * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that - * contains the OCREF clear feature and parameters for the TIM peripheral. - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, - TIM_ClearInputConfigTypeDef *sClearInputConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (sClearInputConfig->ClearInputSource) - { - case TIM_CLEARINPUTSOURCE_NONE: - { - /* Clear the OCREF clear selection bit and the the ETR Bits */ - CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); - break; - } - - case TIM_CLEARINPUTSOURCE_ETR: - { - /* Check the parameters */ - assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); - assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); - assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); - - /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ - if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - TIM_ETR_SetConfig(htim->Instance, - sClearInputConfig->ClearInputPrescaler, - sClearInputConfig->ClearInputPolarity, - sClearInputConfig->ClearInputFilter); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - switch (Channel) - { - case TIM_CHANNEL_1: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 1 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - else - { - /* Disable the OCREF clear feature for Channel 1 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - break; - } - case TIM_CHANNEL_2: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 2 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - else - { - /* Disable the OCREF clear feature for Channel 2 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - break; - } - case TIM_CHANNEL_3: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 3 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - else - { - /* Disable the OCREF clear feature for Channel 3 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - break; - } - case TIM_CHANNEL_4: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 4 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - else - { - /* Disable the OCREF clear feature for Channel 4 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - break; - } - default: - break; - } - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Configures the clock source to be used - * @param htim TIM handle - * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that - * contains the clock source information for the TIM peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); - - /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - htim->Instance->SMCR = tmpsmcr; - - switch (sClockSourceConfig->ClockSource) - { - case TIM_CLOCKSOURCE_INTERNAL: - { - assert_param(IS_TIM_INSTANCE(htim->Instance)); - break; - } - - case TIM_CLOCKSOURCE_ETRMODE1: - { - /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - - /* Select the External clock mode1 and the ETRF trigger */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - break; - } - - case TIM_CLOCKSOURCE_ETRMODE2: - { - /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - /* Enable the External clock mode2 */ - htim->Instance->SMCR |= TIM_SMCR_ECE; - break; - } - - case TIM_CLOCKSOURCE_TI1: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); - break; - } - - case TIM_CLOCKSOURCE_TI2: - { - /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI2 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI2_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); - break; - } - - case TIM_CLOCKSOURCE_TI1ED: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); - break; - } - - case TIM_CLOCKSOURCE_ITR0: - case TIM_CLOCKSOURCE_ITR1: - case TIM_CLOCKSOURCE_ITR2: - case TIM_CLOCKSOURCE_ITR3: - { - /* Check whether or not the timer instance supports internal trigger input */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - - TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); - break; - } - - default: - status = HAL_ERROR; - break; - } - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Selects the signal connected to the TI1 input: direct from CH1_input - * or a XOR combination between CH1_input, CH2_input & CH3_input - * @param htim TIM handle. - * @param TI1_Selection Indicate whether or not channel 1 is connected to the - * output of a XOR gate. - * This parameter can be one of the following values: - * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input - * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 - * pins are connected to the TI1 input (XOR combination) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) -{ - uint32_t tmpcr2; - - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Reset the TI1 selection */ - tmpcr2 &= ~TIM_CR2_TI1S; - - /* Set the TI1 selection */ - tmpcr2 |= TI1_Selection; - - /* Write to TIMxCR2 */ - htim->Instance->CR2 = tmpcr2; - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode - * @param htim TIM handle. - * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the Slave mode - * (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - /* Disable Trigger Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode in interrupt mode - * @param htim TIM handle. - * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the Slave mode - * (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - /* Enable Trigger Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Read the captured value from Capture Compare unit - * @param htim TIM handle. - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval Captured value - */ -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpreg = 0U; - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Return the capture 1 value */ - tmpreg = htim->Instance->CCR1; - - break; - } - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Return the capture 2 value */ - tmpreg = htim->Instance->CCR2; - - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Return the capture 3 value */ - tmpreg = htim->Instance->CCR3; - - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Return the capture 4 value */ - tmpreg = htim->Instance->CCR4; - - break; - } - - default: - break; - } - - return tmpreg; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * -@verbatim - ============================================================================== - ##### TIM Callbacks functions ##### - ============================================================================== - [..] - This section provides TIM callback functions: - (+) TIM Period elapsed callback - (+) TIM Output Compare callback - (+) TIM Input capture callback - (+) TIM Trigger callback - (+) TIM Error callback - -@endverbatim - * @{ - */ - -/** - * @brief Period elapsed callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PeriodElapsedCallback could be implemented in the user file - */ -} - -/** - * @brief Period elapsed half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Output Compare callback in non-blocking mode - * @param htim TIM OC handle - * @retval None - */ -__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file - */ -} - -/** - * @brief Input Capture callback in non-blocking mode - * @param htim TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_CaptureCallback could be implemented in the user file - */ -} - -/** - * @brief Input Capture half complete callback in non-blocking mode - * @param htim TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_TriggerCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Timer error callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_ErrorCallback could be implemented in the user file - */ -} - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User TIM callback to be used instead of the weak predefined callback - * @param htim tim handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID - * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID - * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID - * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID - * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID - * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID - * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID - * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID - * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID - * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID - * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID - * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID - * @param pCallback pointer to the callback function - * @retval status - */ -HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, - pTIM_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(htim); - - if (htim->State == HAL_TIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = pCallback; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_CB_ID : - htim->PeriodElapsedCallback = pCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - htim->PeriodElapsedHalfCpltCallback = pCallback; - break; - - case HAL_TIM_TRIGGER_CB_ID : - htim->TriggerCallback = pCallback; - break; - - case HAL_TIM_TRIGGER_HALF_CB_ID : - htim->TriggerHalfCpltCallback = pCallback; - break; - - case HAL_TIM_IC_CAPTURE_CB_ID : - htim->IC_CaptureCallback = pCallback; - break; - - case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - htim->IC_CaptureHalfCpltCallback = pCallback; - break; - - case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - htim->OC_DelayElapsedCallback = pCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - htim->PWM_PulseFinishedCallback = pCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - htim->PWM_PulseFinishedHalfCpltCallback = pCallback; - break; - - case HAL_TIM_ERROR_CB_ID : - htim->ErrorCallback = pCallback; - break; - - case HAL_TIM_COMMUTATION_CB_ID : - htim->CommutationCallback = pCallback; - break; - - case HAL_TIM_COMMUTATION_HALF_CB_ID : - htim->CommutationHalfCpltCallback = pCallback; - break; - - case HAL_TIM_BREAK_CB_ID : - htim->BreakCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (htim->State == HAL_TIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = pCallback; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Unregister a TIM callback - * TIM callback is redirected to the weak predefined callback - * @param htim tim handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID - * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID - * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID - * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID - * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID - * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID - * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID - * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID - * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID - * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID - * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID - * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(htim); - - if (htim->State == HAL_TIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - /* Legacy weak Base MspInit Callback */ - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - /* Legacy weak Base Msp DeInit Callback */ - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - /* Legacy weak IC Msp Init Callback */ - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - /* Legacy weak IC Msp DeInit Callback */ - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - /* Legacy weak OC Msp Init Callback */ - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - /* Legacy weak OC Msp DeInit Callback */ - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - /* Legacy weak PWM Msp Init Callback */ - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - /* Legacy weak PWM Msp DeInit Callback */ - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - /* Legacy weak One Pulse Msp Init Callback */ - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - /* Legacy weak One Pulse Msp DeInit Callback */ - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - /* Legacy weak Encoder Msp Init Callback */ - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - /* Legacy weak Encoder Msp DeInit Callback */ - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - /* Legacy weak Hall Sensor Msp Init Callback */ - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - /* Legacy weak Hall Sensor Msp DeInit Callback */ - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - break; - - case HAL_TIM_PERIOD_ELAPSED_CB_ID : - /* Legacy weak Period Elapsed Callback */ - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - /* Legacy weak Period Elapsed half complete Callback */ - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; - break; - - case HAL_TIM_TRIGGER_CB_ID : - /* Legacy weak Trigger Callback */ - htim->TriggerCallback = HAL_TIM_TriggerCallback; - break; - - case HAL_TIM_TRIGGER_HALF_CB_ID : - /* Legacy weak Trigger half complete Callback */ - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; - break; - - case HAL_TIM_IC_CAPTURE_CB_ID : - /* Legacy weak IC Capture Callback */ - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; - break; - - case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - /* Legacy weak IC Capture half complete Callback */ - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; - break; - - case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - /* Legacy weak OC Delay Elapsed Callback */ - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - /* Legacy weak PWM Pulse Finished Callback */ - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - /* Legacy weak PWM Pulse Finished half complete Callback */ - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; - break; - - case HAL_TIM_ERROR_CB_ID : - /* Legacy weak Error Callback */ - htim->ErrorCallback = HAL_TIM_ErrorCallback; - break; - - case HAL_TIM_COMMUTATION_CB_ID : - /* Legacy weak Commutation Callback */ - htim->CommutationCallback = HAL_TIMEx_CommutCallback; - break; - - case HAL_TIM_COMMUTATION_HALF_CB_ID : - /* Legacy weak Commutation half complete Callback */ - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; - break; - - case HAL_TIM_BREAK_CB_ID : - /* Legacy weak Break Callback */ - htim->BreakCallback = HAL_TIMEx_BreakCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (htim->State == HAL_TIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - /* Legacy weak Base MspInit Callback */ - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - /* Legacy weak Base Msp DeInit Callback */ - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - /* Legacy weak IC Msp Init Callback */ - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - /* Legacy weak IC Msp DeInit Callback */ - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - /* Legacy weak OC Msp Init Callback */ - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - /* Legacy weak OC Msp DeInit Callback */ - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - /* Legacy weak PWM Msp Init Callback */ - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - /* Legacy weak PWM Msp DeInit Callback */ - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - /* Legacy weak One Pulse Msp Init Callback */ - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - /* Legacy weak One Pulse Msp DeInit Callback */ - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - /* Legacy weak Encoder Msp Init Callback */ - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - /* Legacy weak Encoder Msp DeInit Callback */ - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - /* Legacy weak Hall Sensor Msp Init Callback */ - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - /* Legacy weak Hall Sensor Msp DeInit Callback */ - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return status; -} -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions - * @brief TIM Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Base handle state. - * @param htim TIM Base handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM OC handle state. - * @param htim TIM Output Compare handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM PWM handle state. - * @param htim TIM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Input Capture handle state. - * @param htim TIM IC handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM One Pulse Mode handle state. - * @param htim TIM OPM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Encoder Mode handle state. - * @param htim TIM Encoder Interface handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Encoder Mode handle state. - * @param htim TIM handle - * @retval Active channel - */ -HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) -{ - return htim->Channel; -} - -/** - * @brief Return actual state of the TIM channel. - * @param htim TIM handle - * @param Channel TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @arg TIM_CHANNEL_5: TIM Channel 5 - * @arg TIM_CHANNEL_6: TIM Channel 6 - * @retval TIM Channel state - */ -HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_state; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - - return channel_state; -} - -/** - * @brief Return actual state of a DMA burst operation. - * @param htim TIM handle - * @retval DMA burst state - */ -HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - - return htim->DMABurstState; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ - -/** - * @brief TIM DMA error callback - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMAError(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->ErrorCallback(htim); -#else - HAL_TIM_ErrorCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Delay Pulse complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Delay Pulse half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedHalfCpltCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Capture complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Capture half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureHalfCpltCallback(htim); -#else - HAL_TIM_IC_CaptureHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Period Elapse complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedCallback(htim); -#else - HAL_TIM_PeriodElapsedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Period Elapse half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedHalfCpltCallback(htim); -#else - HAL_TIM_PeriodElapsedHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Trigger callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerCallback(htim); -#else - HAL_TIM_TriggerCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Trigger half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerHalfCpltCallback(htim); -#else - HAL_TIM_TriggerHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief Time Base configuration - * @param TIMx TIM peripheral - * @param Structure TIM Base configuration structure - * @retval None - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) -{ - uint32_t tmpcr1; - tmpcr1 = TIMx->CR1; - - /* Set TIM Time Base Unit parameters ---------------------------------------*/ - if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) - { - /* Select the Counter Mode */ - tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); - tmpcr1 |= Structure->CounterMode; - } - - if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) - { - /* Set the clock division */ - tmpcr1 &= ~TIM_CR1_CKD; - tmpcr1 |= (uint32_t)Structure->ClockDivision; - } - - /* Set the auto-reload preload */ - MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); - - TIMx->CR1 = tmpcr1; - - /* Set the Autoreload value */ - TIMx->ARR = (uint32_t)Structure->Period ; - - /* Set the Prescaler value */ - TIMx->PSC = Structure->Prescaler; - - if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = Structure->RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler - and the repetition counter (only for advanced timer) value immediately */ - TIMx->EGR = TIM_EGR_UG; -} - -/** - * @brief Timer Output Compare 1 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~TIM_CCMR1_OC1M; - tmpccmrx &= ~TIM_CCMR1_CC1S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC1P; - /* Set the Output Compare Polarity */ - tmpccer |= OC_Config->OCPolarity; - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) - { - /* Check parameters */ - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC1NP; - /* Set the Output N Polarity */ - tmpccer |= OC_Config->OCNPolarity; - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC1NE; - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS1; - tmpcr2 &= ~TIM_CR2_OIS1N; - /* Set the Output Idle state */ - tmpcr2 |= OC_Config->OCIdleState; - /* Set the Output N Idle state */ - tmpcr2 |= OC_Config->OCNIdleState; - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 2 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR1_OC2M; - tmpccmrx &= ~TIM_CCMR1_CC2S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC2P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 4U); - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC2NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 4U); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC2NE; - - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS2; - tmpcr2 &= ~TIM_CR2_OIS2N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 2U); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 2U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 3 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 3: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC3M; - tmpccmrx &= ~TIM_CCMR2_CC3S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC3P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 8U); - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC3NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 8U); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC3NE; - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS3; - tmpcr2 &= ~TIM_CR2_OIS3N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 4U); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 4U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 4 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC4M; - tmpccmrx &= ~TIM_CCMR2_CC4S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC4P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 12U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS4; - - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 6U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Slave Timer configuration function - * @param htim TIM handle - * @param sSlaveConfig Slave timer configuration - * @retval None - */ -static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Reset the Trigger Selection Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source */ - tmpsmcr |= sSlaveConfig->InputTrigger; - - /* Reset the slave mode Bits */ - tmpsmcr &= ~TIM_SMCR_SMS; - /* Set the slave mode */ - tmpsmcr |= sSlaveConfig->SlaveMode; - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Configure the trigger prescaler, filter, and polarity */ - switch (sSlaveConfig->InputTrigger) - { - case TIM_TS_ETRF: - { - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - /* Configure the ETR Trigger source */ - TIM_ETR_SetConfig(htim->Instance, - sSlaveConfig->TriggerPrescaler, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_TI1F_ED: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) - { - return HAL_ERROR; - } - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = htim->Instance->CCER; - htim->Instance->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = htim->Instance->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); - - /* Write to TIMx CCMR1 and CCER registers */ - htim->Instance->CCMR1 = tmpccmr1; - htim->Instance->CCER = tmpccer; - break; - } - - case TIM_TS_TI1FP1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI1 Filter and Polarity */ - TIM_TI1_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_TI2FP2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI2 Filter and Polarity */ - TIM_TI2_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_ITR0: - case TIM_TS_ITR1: - case TIM_TS_ITR2: - case TIM_TS_ITR3: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - break; - } - - default: - status = HAL_ERROR; - break; - } - - return status; -} - -/** - * @brief Configure the TI1 as Input. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 - * (on channel2 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) - { - tmpccmr1 &= ~TIM_CCMR1_CC1S; - tmpccmr1 |= TIM_ICSelection; - } - else - { - tmpccmr1 |= TIM_CCMR1_CC1S_0; - } - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI1. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = TIMx->CCER; - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= (TIM_ICFilter << 4U); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= TIM_ICPolarity; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI2 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 - * (on channel1 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr1 &= ~TIM_CCMR1_CC2S; - tmpccmr1 |= (TIM_ICSelection << 8U); - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI2. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= (TIM_ICFilter << 12U); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= (TIM_ICPolarity << 4U); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI3 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2; - uint32_t tmpccer; - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC3S; - tmpccmr2 |= TIM_ICSelection; - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC3F; - tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); - - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); - tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI4 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - * @retval None - */ -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2; - uint32_t tmpccer; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC4S; - tmpccmr2 |= (TIM_ICSelection << 8U); - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC4F; - tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); - tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/** - * @brief Selects the Input Trigger source - * @param TIMx to select the TIM peripheral - * @param InputTriggerSource The Input Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal Trigger 0 - * @arg TIM_TS_ITR1: Internal Trigger 1 - * @arg TIM_TS_ITR2: Internal Trigger 2 - * @arg TIM_TS_ITR3: Internal Trigger 3 - * @arg TIM_TS_TI1F_ED: TI1 Edge Detector - * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 - * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 - * @arg TIM_TS_ETRF: External Trigger input - * @retval None - */ -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) -{ - uint32_t tmpsmcr; - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the TS Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source and the slave mode*/ - tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} -/** - * @brief Configures the TIMx External Trigger (ETR). - * @param TIMx to select the TIM peripheral - * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. - * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. - * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. - * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. - * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. - * @param ExtTRGFilter External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) -{ - uint32_t tmpsmcr; - - tmpsmcr = TIMx->SMCR; - - /* Reset the ETR Bits */ - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel x. - * @param TIMx to select the TIM peripheral - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @param ChannelState specifies the TIM Channel CCxE bit new state. - * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. - * @retval None - */ -void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) -{ - uint32_t tmp; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(TIMx)); - assert_param(IS_TIM_CHANNELS(Channel)); - - tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ - - /* Reset the CCxE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ -} - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief Reset interrupt callbacks to the legacy weak callbacks. - * @param htim pointer to a TIM_HandleTypeDef structure that contains - * the configuration information for TIM module. - * @retval None - */ -void TIM_ResetCallback(TIM_HandleTypeDef *htim) -{ - /* Reset the TIM callback to the legacy weak callbacks */ - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; - htim->TriggerCallback = HAL_TIM_TriggerCallback; - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; - htim->ErrorCallback = HAL_TIM_ErrorCallback; - htim->CommutationCallback = HAL_TIMEx_CommutCallback; - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; - htim->BreakCallback = HAL_TIMEx_BreakCallback; -} -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c deleted file mode 100644 index 092175f..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c +++ /dev/null @@ -1,2428 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim_ex.c - * @author MCD Application Team - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer Extended peripheral: - * + Time Hall Sensor Interface Initialization - * + Time Hall Sensor Interface Start - * + Time Complementary signal break and dead time configuration - * + Time Master and Slave synchronization configuration - * + Timer remapping capabilities configuration - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### TIMER Extended features ##### - ============================================================================== - [..] - The Timer Extended features include: - (#) Complementary outputs with programmable dead-time for : - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to - interconnect several timers together. - (#) Break input to put the timer output signals in reset state or in a known state. - (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for - positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending on the selected feature: - (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - initialization function of this driver: - (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the - Timer Hall Sensor Interface and the commutation event with the corresponding - Interrupt and DMA request if needed (Note that One Timer is used to interface - with the Hall sensor Interface and another Timer should be used to use - the commutation event). - - (#) Activate the TIM peripheral using one of the start functions: - (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), - HAL_TIMEx_OCN_Start_IT() - (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), - HAL_TIMEx_PWMN_Start_IT() - (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() - (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), - HAL_TIMEx_HallSensor_Start_IT(). - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup TIMEx TIMEx - * @brief TIM Extended HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); -static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions - * @{ - */ - -/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * -@verbatim - ============================================================================== - ##### Timer Hall Sensor functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure TIM HAL Sensor. - (+) De-initialize TIM HAL Sensor. - (+) Start the Hall Sensor Interface. - (+) Stop the Hall Sensor Interface. - (+) Start the Hall Sensor Interface and enable interrupts. - (+) Stop the Hall Sensor Interface and disable interrupts. - (+) Start the Hall Sensor Interface and enable DMA transfers. - (+) Stop the Hall Sensor Interface and disable DMA transfers. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. - * @note When the timer instance is initialized in Hall Sensor Interface mode, - * timer channels 1 and channel 2 are reserved and cannot be used for - * other purpose. - * @param htim TIM Hall Sensor Interface handle - * @param sConfig TIM Hall Sensor configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) -{ - TIM_OC_InitTypeDef OC_Config; - - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy week callbacks */ - TIM_ResetCallback(htim); - - if (htim->HallSensor_MspInitCallback == NULL) - { - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->HallSensor_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIMEx_HallSensor_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ - TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->IC1Prescaler; - - /* Enable the Hall sensor interface (XOR function of the three inputs) */ - htim->Instance->CR2 |= TIM_CR2_TI1S; - - /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1F_ED; - - /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; - - /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ - OC_Config.OCFastMode = TIM_OCFAST_DISABLE; - OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; - OC_Config.OCMode = TIM_OCMODE_PWM2; - OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; - OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; - OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; - OC_Config.Pulse = sConfig->Commutation_Delay; - - TIM_OC2_SetConfig(htim->Instance, &OC_Config); - - /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 - register to 101 */ - htim->Instance->CR2 &= ~TIM_CR2_MMS; - htim->Instance->CR2 |= TIM_TRGO_OC2REF; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Hall Sensor interface - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->HallSensor_MspDeInitCallback == NULL) - { - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - } - /* DeInit the low level hardware */ - htim->HallSensor_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIMEx_HallSensor_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Hall Sensor MSP. - * @param htim TIM Hall Sensor Interface handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Hall Sensor MSP. - * @param htim TIM Hall Sensor Interface handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Hall Sensor Interface. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall sensor Interface. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1, 2 and 3 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in interrupt mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the capture compare Interrupts 1 event */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in interrupt mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts event */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in DMA mode. - * @param htim TIM Hall Sensor Interface handle - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel state */ - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Set the DMA Input Capture 1 Callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream for Capture 1*/ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the capture compare 1 Interrupt */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in DMA mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - - /* Disable the capture compare Interrupts 1 event */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * -@verbatim - ============================================================================== - ##### Timer Complementary Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary Output Compare/PWM. - (+) Stop the Complementary Output Compare/PWM. - (+) Start the Complementary Output Compare/PWM and enable interrupts. - (+) Stop the Complementary Output Compare/PWM and disable interrupts. - (+) Start the Complementary Output Compare/PWM and enable DMA transfers. - (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM Output Compare signal generation on the complementary - * output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation on the complementary - * output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim TIM OC handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpccer; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * -@verbatim - ============================================================================== - ##### Timer Complementary PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary PWM. - (+) Stop the Complementary PWM. - (+) Start the Complementary PWM and enable interrupts. - (+) Stop the Complementary PWM and disable interrupts. - (+) Start the Complementary PWM and enable DMA transfers. - (+) Stop the Complementary PWM and disable DMA transfers. - (+) Start the Complementary Input Capture measurement. - (+) Stop the Complementary Input Capture. - (+) Start the Complementary Input Capture and enable interrupts. - (+) Stop the Complementary Input Capture and disable interrupts. - (+) Start the Complementary Input Capture and enable DMA transfers. - (+) Stop the Complementary Input Capture and disable DMA transfers. - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the PWM signal generation on the complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation on the complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpccer; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode on the - * complementary output - * @param htim TIM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode on the complementary - * output - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * -@verbatim - ============================================================================== - ##### Timer Complementary One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM One Pulse signal generation on the complementary - * output. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to enable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation on the complementary - * output. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to enable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - /* Enable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure the commutation event in case of use of the Hall sensor interface. - (+) Configure Output channels for OC and PWM mode. - - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master synchronization. - (+) Configure timer remapping capabilities. - -@endverbatim - * @{ - */ - -/** - * @brief Configure the TIM commutation event sequence. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Disable Commutation Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); - - /* Disable Commutation DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with interrupt. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Disable Commutation DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); - - /* Enable the Commutation Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with DMA. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Enable the Commutation DMA Request */ - /* Set the DMA Commutation Callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; - - /* Disable Commutation Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); - - /* Enable the Commutation DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIM in master mode. - * @param htim TIM handle. - * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that - * contains the selected trigger output (TRGO) and the Master/Slave - * mode. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - TIM_MasterConfigTypeDef *sMasterConfig) -{ - uint32_t tmpcr2; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); - assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); - - /* Check input state */ - __HAL_LOCK(htim); - - /* Change the handler state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Reset the MMS Bits */ - tmpcr2 &= ~TIM_CR2_MMS; - /* Select the TRGO source */ - tmpcr2 |= sMasterConfig->MasterOutputTrigger; - - /* Update TIMx CR2 */ - htim->Instance->CR2 = tmpcr2; - - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - /* Reset the MSM Bit */ - tmpsmcr &= ~TIM_SMCR_MSM; - /* Set master mode */ - tmpsmcr |= sMasterConfig->MasterSlaveMode; - - /* Update TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - } - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State - * and the AOE(automatic output enable). - * @param htim TIM handle - * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that - * contains the BDTR Register configuration information for the TIM peripheral. - * @note Interrupts can be generated when an active level is detected on the - * break input, the break 2 input or the system break input. Break - * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) -{ - /* Keep this variable initialized to 0 as it is used to configure BDTR register */ - uint32_t tmpbdtr = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); - assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); - assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); - assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); - assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); - assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); - assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); - - /* Check input state */ - __HAL_LOCK(htim); - - /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - - /* Set the BDTR bits */ - MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); - MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); - MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); - - - /* Set TIMx_BDTR */ - htim->Instance->BDTR = tmpbdtr; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIMx Remapping input capabilities. - * @param htim TIM handle. - * @param Remap specifies the TIM remapping source. - * For TIM1, the parameter can have the following values: (**) - * @arg TIM_TIM1_TIM3_TRGO: TIM1 ITR2 is connected to TIM3 TRGO - * @arg TIM_TIM1_LPTIM: TIM1 ITR2 is connected to LPTIM1 output - * - * For TIM2, the parameter can have the following values: (**) - * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 is connected to TIM8 TRGO (*) - * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 is connected to PTP trigger output (*) - * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 is connected to OTG FS SOF - * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 is connected to OTG FS SOF - * - * For TIM5, the parameter can have the following values: - * @arg TIM_TIM5_GPIO: TIM5 TI4 is connected to GPIO - * @arg TIM_TIM5_LSI: TIM5 TI4 is connected to LSI - * @arg TIM_TIM5_LSE: TIM5 TI4 is connected to LSE - * @arg TIM_TIM5_RTC: TIM5 TI4 is connected to the RTC wakeup interrupt - * @arg TIM_TIM5_TIM3_TRGO: TIM5 ITR1 is connected to TIM3 TRGO (*) - * @arg TIM_TIM5_LPTIM: TIM5 ITR1 is connected to LPTIM1 output (*) - * - * For TIM9, the parameter can have the following values: (**) - * @arg TIM_TIM9_TIM3_TRGO: TIM9 ITR1 is connected to TIM3 TRGO - * @arg TIM_TIM9_LPTIM: TIM9 ITR1 is connected to LPTIM1 output - * - * For TIM11, the parameter can have the following values: - * @arg TIM_TIM11_GPIO: TIM11 TI1 is connected to GPIO - * @arg TIM_TIM11_HSE: TIM11 TI1 is connected to HSE_RTC clock - * @arg TIM_TIM11_SPDIFRX: TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC (*) - * - * (*) Value not defined in all devices. \n - * (**) Register not available in all devices. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) -{ - - /* Check parameters */ - assert_param(IS_TIM_REMAP(htim->Instance, Remap)); - - __HAL_LOCK(htim); - -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) - if ((Remap & LPTIM_REMAP_MASK) == LPTIM_REMAP_MASK) - { - /* Connect TIMx internal trigger to LPTIM1 output */ - __HAL_RCC_LPTIM1_CLK_ENABLE(); - MODIFY_REG(LPTIM1->OR, - (LPTIM_OR_TIM1_ITR2_RMP | LPTIM_OR_TIM5_ITR1_RMP | LPTIM_OR_TIM9_ITR1_RMP), - Remap & ~(LPTIM_REMAP_MASK)); - } - else - { - /* Set the Timer remapping configuration */ - WRITE_REG(htim->Instance->OR, Remap); - } -#else - /* Set the Timer remapping configuration */ - WRITE_REG(htim->Instance->OR, Remap); -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions - * @brief Extended Callbacks functions - * -@verbatim - ============================================================================== - ##### Extended Callbacks functions ##### - ============================================================================== - [..] - This section provides Extended TIM callback functions: - (+) Timer Commutation callback - (+) Timer Break callback - -@endverbatim - * @{ - */ - -/** - * @brief Hall commutation changed callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_CommutCallback could be implemented in the user file - */ -} -/** - * @brief Hall commutation changed half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Break detection callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_BreakCallback could be implemented in the user file - */ -} -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions - * @brief Extended Peripheral State functions - * -@verbatim - ============================================================================== - ##### Extended Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Hall Sensor interface handle state. - * @param htim TIM Hall Sensor handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return actual state of the TIM complementary channel. - * @param htim TIM handle - * @param ChannelN TIM Complementary channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @retval TIM Complementary channel state - */ -HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) -{ - HAL_TIM_ChannelStateTypeDef channel_state; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); - - channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); - - return channel_state; -} -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions - * @{ - */ - -/** - * @brief TIM DMA Commutation callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationCallback(htim); -#else - HAL_TIMEx_CommutCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Commutation half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationHalfCpltCallback(htim); -#else - HAL_TIMEx_CommutHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - - -/** - * @brief TIM DMA Delay Pulse complete callback (complementary channel). - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA error callback (complementary channel) - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->ErrorCallback(htim); -#else - HAL_TIM_ErrorCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel xN. - * @param TIMx to select the TIM peripheral - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @param ChannelNState specifies the TIM Channel CCxNE bit new state. - * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. - * @retval None - */ -static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) -{ - uint32_t tmp; - - tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ - - /* Reset the CCxNE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ -} -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ diff --git a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c b/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c deleted file mode 100644 index 1df5fcf..0000000 --- a/workspace/stm32f407_default/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c +++ /dev/null @@ -1,2224 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_usb.c - * @author MCD Application Team - * @brief USB Low Layer HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization/de-initialization functions - * + I/O operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. - - (#) Call USB_CoreInit() API to initialize the USB Core peripheral. - - (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. - - @endverbatim - - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_LL_USB_DRIVER - * @{ - */ - -#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions - * @{ - */ - -/** @defgroup USB_LL_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization/de-initialization functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the USB Core - * @param USBx USB Instance - * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - HAL_StatusTypeDef ret; - if (cfg.phy_itface == USB_OTG_ULPI_PHY) - { - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - - /* Init The ULPI Interface */ - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL); - - /* Select vbus source */ - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); - if (cfg.use_external_vbus == 1U) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD; - } - - /* Reset after a PHY select */ - ret = USB_CoreReset(USBx); - } - else /* FS interface (embedded Phy) */ - { - /* Select FS Embedded PHY */ - USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; - - /* Reset after a PHY select */ - ret = USB_CoreReset(USBx); - - if (cfg.battery_charging_enable == 0U) - { - /* Activate the USB Transceiver */ - USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; - } - else - { - /* Deactivate the USB Transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - } - } - - if (cfg.dma_enable == 1U) - { - USBx->GAHBCFG |= USB_OTG_GAHBCFG_HBSTLEN_2; - USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN; - } - - return ret; -} - - -/** - * @brief Set the USB turnaround time - * @param USBx USB Instance - * @param hclk: AHB clock frequency - * @retval USB turnaround time In PHY Clocks number - */ -HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, - uint32_t hclk, uint8_t speed) -{ - uint32_t UsbTrd; - - /* The USBTRD is configured according to the tables below, depending on AHB frequency - used by application. In the low AHB frequency range it is used to stretch enough the USB response - time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access - latency to the Data FIFO */ - if (speed == USBD_FS_SPEED) - { - if ((hclk >= 14200000U) && (hclk < 15000000U)) - { - /* hclk Clock Range between 14.2-15 MHz */ - UsbTrd = 0xFU; - } - else if ((hclk >= 15000000U) && (hclk < 16000000U)) - { - /* hclk Clock Range between 15-16 MHz */ - UsbTrd = 0xEU; - } - else if ((hclk >= 16000000U) && (hclk < 17200000U)) - { - /* hclk Clock Range between 16-17.2 MHz */ - UsbTrd = 0xDU; - } - else if ((hclk >= 17200000U) && (hclk < 18500000U)) - { - /* hclk Clock Range between 17.2-18.5 MHz */ - UsbTrd = 0xCU; - } - else if ((hclk >= 18500000U) && (hclk < 20000000U)) - { - /* hclk Clock Range between 18.5-20 MHz */ - UsbTrd = 0xBU; - } - else if ((hclk >= 20000000U) && (hclk < 21800000U)) - { - /* hclk Clock Range between 20-21.8 MHz */ - UsbTrd = 0xAU; - } - else if ((hclk >= 21800000U) && (hclk < 24000000U)) - { - /* hclk Clock Range between 21.8-24 MHz */ - UsbTrd = 0x9U; - } - else if ((hclk >= 24000000U) && (hclk < 27700000U)) - { - /* hclk Clock Range between 24-27.7 MHz */ - UsbTrd = 0x8U; - } - else if ((hclk >= 27700000U) && (hclk < 32000000U)) - { - /* hclk Clock Range between 27.7-32 MHz */ - UsbTrd = 0x7U; - } - else /* if(hclk >= 32000000) */ - { - /* hclk Clock Range between 32-200 MHz */ - UsbTrd = 0x6U; - } - } - else if (speed == USBD_HS_SPEED) - { - UsbTrd = USBD_HS_TRDT_VALUE; - } - else - { - UsbTrd = USBD_DEFAULT_TRDT_VALUE; - } - - USBx->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; - USBx->GUSBCFG |= (uint32_t)((UsbTrd << 10) & USB_OTG_GUSBCFG_TRDT); - - return HAL_OK; -} - -/** - * @brief USB_EnableGlobalInt - * Enables the controller's Global Int in the AHB Config reg - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) -{ - USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; - return HAL_OK; -} - -/** - * @brief USB_DisableGlobalInt - * Disable the controller's Global Int in the AHB Config reg - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) -{ - USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; - return HAL_OK; -} - -/** - * @brief USB_SetCurrentMode Set functional mode - * @param USBx Selected device - * @param mode current core mode - * This parameter can be one of these values: - * @arg USB_DEVICE_MODE Peripheral mode - * @arg USB_HOST_MODE Host mode - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode) -{ - uint32_t ms = 0U; - - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); - - if (mode == USB_HOST_MODE) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; - - do - { - HAL_Delay(1U); - ms++; - } while ((USB_GetMode(USBx) != (uint32_t)USB_HOST_MODE) && (ms < 50U)); - } - else if (mode == USB_DEVICE_MODE) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - - do - { - HAL_Delay(1U); - ms++; - } while ((USB_GetMode(USBx) != (uint32_t)USB_DEVICE_MODE) && (ms < 50U)); - } - else - { - return HAL_ERROR; - } - - if (ms == 50U) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief USB_DevInit Initializes the USB_OTG controller registers - * for device mode - * @param USBx Selected device - * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t i; - - for (i = 0U; i < 15U; i++) - { - USBx->DIEPTXF[i] = 0U; - } - -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* VBUS Sensing setup */ - if (cfg.vbus_sensing_enable == 0U) - { - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - - /* Deactivate VBUS Sensing B */ - USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - /* B-peripheral session valid override enable */ - USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; - } - else - { - /* Enable HW VBUS sensing */ - USBx->GCCFG |= USB_OTG_GCCFG_VBDEN; - } -#else - /* VBUS Sensing setup */ - if (cfg.vbus_sensing_enable == 0U) - { - /* - * Disable HW VBUS sensing. VBUS is internally considered to be always - * at VBUS-Valid level (5V). - */ - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } - else - { - /* Enable HW VBUS sensing */ - USBx->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ - - /* Restart the Phy Clock */ - USBx_PCGCCTL = 0U; - - /* Device mode configuration */ - USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80; - - if (cfg.phy_itface == USB_OTG_ULPI_PHY) - { - if (cfg.speed == USBD_HS_SPEED) - { - /* Set Core speed to High speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH); - } - else - { - /* Set Core speed to Full speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL); - } - } - else - { - /* Set Core speed to Full speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); - } - - /* Flush the FIFOs */ - if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ - { - ret = HAL_ERROR; - } - - if (USB_FlushRxFifo(USBx) != HAL_OK) - { - ret = HAL_ERROR; - } - - /* Clear all pending Device Interrupts */ - USBx_DEVICE->DIEPMSK = 0U; - USBx_DEVICE->DOEPMSK = 0U; - USBx_DEVICE->DAINTMSK = 0U; - - for (i = 0U; i < cfg.dev_endpoints; i++) - { - if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - if (i == 0U) - { - USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_SNAK; - } - else - { - USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK; - } - } - else - { - USBx_INEP(i)->DIEPCTL = 0U; - } - - USBx_INEP(i)->DIEPTSIZ = 0U; - USBx_INEP(i)->DIEPINT = 0xFB7FU; - } - - for (i = 0U; i < cfg.dev_endpoints; i++) - { - if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - if (i == 0U) - { - USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_SNAK; - } - else - { - USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK; - } - } - else - { - USBx_OUTEP(i)->DOEPCTL = 0U; - } - - USBx_OUTEP(i)->DOEPTSIZ = 0U; - USBx_OUTEP(i)->DOEPINT = 0xFB7FU; - } - - USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); - - /* Disable all interrupts. */ - USBx->GINTMSK = 0U; - - /* Clear any pending interrupts */ - USBx->GINTSTS = 0xBFFFFFFFU; - - /* Enable the common interrupts */ - if (cfg.dma_enable == 0U) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - } - - /* Enable interrupts matching to the Device mode ONLY */ - USBx->GINTMSK |= USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST | - USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT | - USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM | - USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM; - - if (cfg.Sof_enable != 0U) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; - } - - if (cfg.vbus_sensing_enable == 1U) - { - USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); - } - - return ret; -} - -/** - * @brief USB_FlushTxFifo Flush a Tx FIFO - * @param USBx Selected device - * @param num FIFO number - * This parameter can be a value from 1 to 15 - 15 means Flush all Tx FIFOs - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) -{ - __IO uint32_t count = 0U; - - /* Wait for AHB master IDLE state. */ - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); - - /* Flush TX Fifo */ - count = 0U; - USBx->GRSTCTL = (USB_OTG_GRSTCTL_TXFFLSH | (num << 6)); - - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); - - return HAL_OK; -} - -/** - * @brief USB_FlushRxFifo Flush Rx FIFO - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) -{ - __IO uint32_t count = 0U; - - /* Wait for AHB master IDLE state. */ - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); - - /* Flush RX Fifo */ - count = 0U; - USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; - - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); - - return HAL_OK; -} - -/** - * @brief USB_SetDevSpeed Initializes the DevSpd field of DCFG register - * depending the PHY type and the enumeration speed of the device. - * @param USBx Selected device - * @param speed device speed - * This parameter can be one of these values: - * @arg USB_OTG_SPEED_HIGH: High speed mode - * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode - * @arg USB_OTG_SPEED_FULL: Full speed mode - * @retval Hal status - */ -HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - USBx_DEVICE->DCFG |= speed; - return HAL_OK; -} - -/** - * @brief USB_GetDevSpeed Return the Dev Speed - * @param USBx Selected device - * @retval speed device speed - * This parameter can be one of these values: - * @arg USBD_HS_SPEED: High speed mode - * @arg USBD_FS_SPEED: Full speed mode - */ -uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint8_t speed; - uint32_t DevEnumSpeed = USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD; - - if (DevEnumSpeed == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ) - { - speed = USBD_HS_SPEED; - } - else if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || - (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) - { - speed = USBD_FS_SPEED; - } - else - { - speed = 0xFU; - } - - return speed; -} - -/** - * @brief Activate and configure an endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - if (ep->is_in == 1U) - { - USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); - - if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_USBAEP) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | - ((uint32_t)ep->type << 18) | (epnum << 22) | - USB_OTG_DIEPCTL_SD0PID_SEVNFRM | - USB_OTG_DIEPCTL_USBAEP; - } - } - else - { - USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); - - if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) - { - USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | - ((uint32_t)ep->type << 18) | - USB_OTG_DIEPCTL_SD0PID_SEVNFRM | - USB_OTG_DOEPCTL_USBAEP; - } - } - return HAL_OK; -} - -/** - * @brief Activate and configure a dedicated endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - /* Read DEPCTLn register */ - if (ep->is_in == 1U) - { - if (((USBx_INEP(epnum)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | - ((uint32_t)ep->type << 18) | (epnum << 22) | - USB_OTG_DIEPCTL_SD0PID_SEVNFRM | - USB_OTG_DIEPCTL_USBAEP; - } - - USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); - } - else - { - if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) - { - USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | - ((uint32_t)ep->type << 18) | (epnum << 22) | - USB_OTG_DOEPCTL_USBAEP; - } - - USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); - } - - return HAL_OK; -} - -/** - * @brief De-activate and de-initialize an endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - /* Read DEPCTLn register */ - if (ep->is_in == 1U) - { - if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; - } - - USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); - USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_USBAEP | - USB_OTG_DIEPCTL_MPSIZ | - USB_OTG_DIEPCTL_TXFNUM | - USB_OTG_DIEPCTL_SD0PID_SEVNFRM | - USB_OTG_DIEPCTL_EPTYP); - } - else - { - if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; - } - - USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); - USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_USBAEP | - USB_OTG_DOEPCTL_MPSIZ | - USB_OTG_DOEPCTL_SD0PID_SEVNFRM | - USB_OTG_DOEPCTL_EPTYP); - } - - return HAL_OK; -} - -/** - * @brief De-activate and de-initialize a dedicated endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - /* Read DEPCTLn register */ - if (ep->is_in == 1U) - { - if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; - } - - USBx_INEP(epnum)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); - } - else - { - if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; - } - - USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); - } - - return HAL_OK; -} - -/** - * @brief USB_EPStartXfer : setup and starts a transfer over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - uint16_t pktcnt; - - /* IN endpoint */ - if (ep->is_in == 1U) - { - /* Zero Length Packet? */ - if (ep->xfer_len == 0U) - { - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - } - else - { - /* Program the transfer size and packet count - * as follows: xfersize = N * maxpacket + - * short_packet pktcnt = N + (short_packet - * exist ? 1 : 0) - */ - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & - (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19)); - - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); - - if (ep->type == EP_TYPE_ISOC) - { - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29)); - } - } - - if (dma == 1U) - { - if ((uint32_t)ep->dma_addr != 0U) - { - USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); - } - - if (ep->type == EP_TYPE_ISOC) - { - if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; - } - else - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; - } - } - - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - } - else - { - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - - if (ep->type != EP_TYPE_ISOC) - { - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0U) - { - USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); - } - } - else - { - if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; - } - else - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; - } - - (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len, dma); - } - } - } - else /* OUT endpoint */ - { - /* Program the transfer size and packet count as follows: - * pktcnt = N - * xfersize = N * maxpacket - */ - USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); - USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); - - if (ep->xfer_len == 0U) - { - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); - } - else - { - pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket); - ep->xfer_size = ep->maxpacket * pktcnt; - - USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19); - USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size; - } - - if (dma == 1U) - { - if ((uint32_t)ep->xfer_buff != 0U) - { - USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); - } - } - - if (ep->type == EP_TYPE_ISOC) - { - if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; - } - else - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; - } - } - /* EP enable */ - USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); - } - - return HAL_OK; -} - -/** - * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0 - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @retval HAL status - */ -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - /* IN endpoint */ - if (ep->is_in == 1U) - { - /* Zero Length Packet? */ - if (ep->xfer_len == 0U) - { - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - } - else - { - /* Program the transfer size and packet count - * as follows: xfersize = N * maxpacket + - * short_packet pktcnt = N + (short_packet - * exist ? 1 : 0) - */ - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - - if (ep->xfer_len > ep->maxpacket) - { - ep->xfer_len = ep->maxpacket; - } - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); - } - - if (dma == 1U) - { - if ((uint32_t)ep->dma_addr != 0U) - { - USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); - } - - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - } - else - { - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0U) - { - USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); - } - } - } - else /* OUT endpoint */ - { - /* Program the transfer size and packet count as follows: - * pktcnt = N - * xfersize = N * maxpacket - */ - USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); - USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); - - if (ep->xfer_len > 0U) - { - ep->xfer_len = ep->maxpacket; - } - - /* Store transfer size, for EP0 this is equal to endpoint max packet size */ - ep->xfer_size = ep->maxpacket; - - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size); - - if (dma == 1U) - { - if ((uint32_t)ep->xfer_buff != 0U) - { - USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); - } - } - - /* EP enable */ - USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); - } - - return HAL_OK; -} - - -/** - * @brief USB_EPStoptXfer Stop transfer on an EP - * @param USBx usb device instance - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - __IO uint32_t count = 0U; - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - - /* IN endpoint */ - if (ep->is_in == 1U) - { - /* EP enable, IN data in FIFO */ - if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_SNAK); - USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_EPDIS); - - do - { - count++; - - if (count > 10000U) - { - ret = HAL_ERROR; - break; - } - } while (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA); - } - } - else /* OUT endpoint */ - { - if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_SNAK); - USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_EPDIS); - - do - { - count++; - - if (count > 10000U) - { - ret = HAL_ERROR; - break; - } - } while (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA); - } - } - - return ret; -} - - -/** - * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated - * with the EP/channel - * @param USBx Selected device - * @param src pointer to source buffer - * @param ch_ep_num endpoint or host channel number - * @param len Number of bytes to write - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @retval HAL status - */ -HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, - uint8_t ch_ep_num, uint16_t len, uint8_t dma) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint8_t *pSrc = src; - uint32_t count32b; - uint32_t i; - - if (dma == 0U) - { - count32b = ((uint32_t)len + 3U) / 4U; - for (i = 0U; i < count32b; i++) - { - USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); - pSrc++; - pSrc++; - pSrc++; - pSrc++; - } - } - - return HAL_OK; -} - -/** - * @brief USB_ReadPacket : read a packet from the RX FIFO - * @param USBx Selected device - * @param dest source pointer - * @param len Number of bytes to read - * @retval pointer to destination buffer - */ -void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint8_t *pDest = dest; - uint32_t pData; - uint32_t i; - uint32_t count32b = (uint32_t)len >> 2U; - uint16_t remaining_bytes = len % 4U; - - for (i = 0U; i < count32b; i++) - { - __UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U)); - pDest++; - pDest++; - pDest++; - pDest++; - } - - /* When Number of data is not word aligned, read the remaining byte */ - if (remaining_bytes != 0U) - { - i = 0U; - __UNALIGNED_UINT32_WRITE(&pData, USBx_DFIFO(0U)); - - do - { - *(uint8_t *)pDest = (uint8_t)(pData >> (8U * (uint8_t)(i))); - i++; - pDest++; - remaining_bytes--; - } while (remaining_bytes != 0U); - } - - return ((void *)pDest); -} - -/** - * @brief USB_EPSetStall : set a stall condition over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - if (ep->is_in == 1U) - { - if (((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == 0U) && (epnum != 0U)) - { - USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); - } - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; - } - else - { - if (((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == 0U) && (epnum != 0U)) - { - USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); - } - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; - } - - return HAL_OK; -} - -/** - * @brief USB_EPClearStall : Clear a stall condition over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - if (ep->is_in == 1U) - { - USBx_INEP(epnum)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; - if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ - } - } - else - { - USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; - if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ - } - } - return HAL_OK; -} - -/** - * @brief USB_StopDevice : Stop the usb device mode - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) -{ - HAL_StatusTypeDef ret; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t i; - - /* Clear Pending interrupt */ - for (i = 0U; i < 15U; i++) - { - USBx_INEP(i)->DIEPINT = 0xFB7FU; - USBx_OUTEP(i)->DOEPINT = 0xFB7FU; - } - - /* Clear interrupt masks */ - USBx_DEVICE->DIEPMSK = 0U; - USBx_DEVICE->DOEPMSK = 0U; - USBx_DEVICE->DAINTMSK = 0U; - - /* Flush the FIFO */ - ret = USB_FlushRxFifo(USBx); - if (ret != HAL_OK) - { - return ret; - } - - ret = USB_FlushTxFifo(USBx, 0x10U); - if (ret != HAL_OK) - { - return ret; - } - - return ret; -} - -/** - * @brief USB_SetDevAddress : Stop the usb device mode - * @param USBx Selected device - * @param address new device address to be assigned - * This parameter can be a value from 0 to 255 - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - USBx_DEVICE->DCFG &= ~(USB_OTG_DCFG_DAD); - USBx_DEVICE->DCFG |= ((uint32_t)address << 4) & USB_OTG_DCFG_DAD; - - return HAL_OK; -} - -/** - * @brief USB_DevConnect : Connect the USB device by enabling Rpu - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - /* In case phy is stopped, ensure to ungate and restore the phy CLK */ - USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); - - USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS; - - return HAL_OK; -} - -/** - * @brief USB_DevDisconnect : Disconnect the USB device by disabling Rpu - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - /* In case phy is stopped, ensure to ungate and restore the phy CLK */ - USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); - - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - - return HAL_OK; -} - -/** - * @brief USB_ReadInterrupts: return the global USB interrupt status - * @param USBx Selected device - * @retval HAL status - */ -uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t tmpreg; - - tmpreg = USBx->GINTSTS; - tmpreg &= USBx->GINTMSK; - - return tmpreg; -} - -/** - * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status - * @param USBx Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t tmpreg; - - tmpreg = USBx_DEVICE->DAINT; - tmpreg &= USBx_DEVICE->DAINTMSK; - - return ((tmpreg & 0xffff0000U) >> 16); -} - -/** - * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status - * @param USBx Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t tmpreg; - - tmpreg = USBx_DEVICE->DAINT; - tmpreg &= USBx_DEVICE->DAINTMSK; - - return ((tmpreg & 0xFFFFU)); -} - -/** - * @brief Returns Device OUT EP Interrupt register - * @param USBx Selected device - * @param epnum endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device OUT EP Interrupt register - */ -uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t tmpreg; - - tmpreg = USBx_OUTEP((uint32_t)epnum)->DOEPINT; - tmpreg &= USBx_DEVICE->DOEPMSK; - - return tmpreg; -} - -/** - * @brief Returns Device IN EP Interrupt register - * @param USBx Selected device - * @param epnum endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device IN EP Interrupt register - */ -uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t tmpreg; - uint32_t msk; - uint32_t emp; - - msk = USBx_DEVICE->DIEPMSK; - emp = USBx_DEVICE->DIEPEMPMSK; - msk |= ((emp >> (epnum & EP_ADDR_MSK)) & 0x1U) << 7; - tmpreg = USBx_INEP((uint32_t)epnum)->DIEPINT & msk; - - return tmpreg; -} - -/** - * @brief USB_ClearInterrupts: clear a USB interrupt - * @param USBx Selected device - * @param interrupt flag - * @retval None - */ -void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) -{ - USBx->GINTSTS |= interrupt; -} - -/** - * @brief Returns USB core mode - * @param USBx Selected device - * @retval return core mode : Host or Device - * This parameter can be one of these values: - * 0 : Host - * 1 : Device - */ -uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx) -{ - return ((USBx->GINTSTS) & 0x1U); -} - -/** - * @brief Activate EP0 for Setup transactions - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - /* Set the MPS of the IN EP0 to 64 bytes */ - USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; - - USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; - - return HAL_OK; -} - -/** - * @brief Prepare the EP0 to start the first control setup - * @param USBx Selected device - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @param psetup pointer to setup packet - * @retval HAL status - */ -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); - - if (gSNPSiD > USB_OTG_CORE_ID_300A) - { - if ((USBx_OUTEP(0U)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - return HAL_OK; - } - } - - USBx_OUTEP(0U)->DOEPTSIZ = 0U; - USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); - USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U); - USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; - - if (dma == 1U) - { - USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup; - /* EP enable */ - USBx_OUTEP(0U)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP; - } - - return HAL_OK; -} - -/** - * @brief Reset the USB Core (needed after USB clock settings change) - * @param USBx Selected device - * @retval HAL status - */ -static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) -{ - __IO uint32_t count = 0U; - - /* Wait for AHB master IDLE state. */ - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); - - /* Core Soft Reset */ - count = 0U; - USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; - - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); - - return HAL_OK; -} - -/** - * @brief USB_HostInit : Initializes the USB OTG controller registers - * for Host mode - * @param USBx Selected device - * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t i; - - /* Restart the Phy Clock */ - USBx_PCGCCTL = 0U; - -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Disable HW VBUS sensing */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_VBDEN); -#else - /* - * Disable HW VBUS sensing. VBUS is internally considered to be always - * at VBUS-Valid level (5V). - */ - USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Disable Battery chargin detector */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); -#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ - - if ((USBx->CID & (0x1U << 8)) != 0U) - { - if (cfg.speed == USBH_FSLS_SPEED) - { - /* Force Device Enumeration to FS/LS mode only */ - USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; - } - else - { - /* Set default Max speed support */ - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); - } - } - else - { - /* Set default Max speed support */ - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); - } - - /* Make sure the FIFOs are flushed. */ - if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ - { - ret = HAL_ERROR; - } - - if (USB_FlushRxFifo(USBx) != HAL_OK) - { - ret = HAL_ERROR; - } - - /* Clear all pending HC Interrupts */ - for (i = 0U; i < cfg.Host_channels; i++) - { - USBx_HC(i)->HCINT = 0xFFFFFFFFU; - USBx_HC(i)->HCINTMSK = 0U; - } - - /* Disable all interrupts. */ - USBx->GINTMSK = 0U; - - /* Clear any pending interrupts */ - USBx->GINTSTS = 0xFFFFFFFFU; - - if ((USBx->CID & (0x1U << 8)) != 0U) - { - /* set Rx FIFO size */ - USBx->GRXFSIZ = 0x200U; - USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x100U << 16) & USB_OTG_NPTXFD) | 0x200U); - USBx->HPTXFSIZ = (uint32_t)(((0xE0U << 16) & USB_OTG_HPTXFSIZ_PTXFD) | 0x300U); - } - else - { - /* set Rx FIFO size */ - USBx->GRXFSIZ = 0x80U; - USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x60U << 16) & USB_OTG_NPTXFD) | 0x80U); - USBx->HPTXFSIZ = (uint32_t)(((0x40U << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U); - } - - /* Enable the common interrupts */ - if (cfg.dma_enable == 0U) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - } - - /* Enable interrupts matching to the Host mode ONLY */ - USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM | \ - USB_OTG_GINTMSK_SOFM | USB_OTG_GINTSTS_DISCINT | \ - USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); - - return ret; -} - -/** - * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the - * HCFG register on the PHY type and set the right frame interval - * @param USBx Selected device - * @param freq clock frequency - * This parameter can be one of these values: - * HCFG_48_MHZ : Full Speed 48 MHz Clock - * HCFG_6_MHZ : Low Speed 6 MHz Clock - * @retval HAL status - */ -HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); - USBx_HOST->HCFG |= (uint32_t)freq & USB_OTG_HCFG_FSLSPCS; - - if (freq == HCFG_48_MHZ) - { - USBx_HOST->HFIR = 48000U; - } - else if (freq == HCFG_6_MHZ) - { - USBx_HOST->HFIR = 6000U; - } - else - { - /* ... */ - } - - return HAL_OK; -} - -/** - * @brief USB_OTG_ResetPort : Reset Host Port - * @param USBx Selected device - * @retval HAL status - * @note (1)The application must wait at least 10 ms - * before clearing the reset bit. - */ -HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - __IO uint32_t hprt0 = 0U; - - hprt0 = USBx_HPRT0; - - hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | - USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); - - USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); - HAL_Delay(100U); /* See Note #1 */ - USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); - HAL_Delay(10U); - - return HAL_OK; -} - -/** - * @brief USB_DriveVbus : activate or de-activate vbus - * @param state VBUS state - * This parameter can be one of these values: - * 0 : Deactivate VBUS - * 1 : Activate VBUS - * @retval HAL status - */ -HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - __IO uint32_t hprt0 = 0U; - - hprt0 = USBx_HPRT0; - - hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | - USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); - - if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U)) - { - USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); - } - if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U)) - { - USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); - } - return HAL_OK; -} - -/** - * @brief Return Host Core speed - * @param USBx Selected device - * @retval speed : Host speed - * This parameter can be one of these values: - * @arg HCD_SPEED_HIGH: High speed mode - * @arg HCD_SPEED_FULL: Full speed mode - * @arg HCD_SPEED_LOW: Low speed mode - */ -uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - __IO uint32_t hprt0 = 0U; - - hprt0 = USBx_HPRT0; - return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); -} - -/** - * @brief Return Host Current Frame number - * @param USBx Selected device - * @retval current frame number - */ -uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); -} - -/** - * @brief Initialize a host channel - * @param USBx Selected device - * @param ch_num Channel number - * This parameter can be a value from 1 to 15 - * @param epnum Endpoint number - * This parameter can be a value from 1 to 15 - * @param dev_address Current device address - * This parameter can be a value from 0 to 255 - * @param speed Current device speed - * This parameter can be one of these values: - * @arg USB_OTG_SPEED_HIGH: High speed mode - * @arg USB_OTG_SPEED_FULL: Full speed mode - * @arg USB_OTG_SPEED_LOW: Low speed mode - * @param ep_type Endpoint Type - * This parameter can be one of these values: - * @arg EP_TYPE_CTRL: Control type - * @arg EP_TYPE_ISOC: Isochronous type - * @arg EP_TYPE_BULK: Bulk type - * @arg EP_TYPE_INTR: Interrupt type - * @param mps Max Packet Size - * This parameter can be a value from 0 to 32K - * @retval HAL state - */ -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, - uint8_t epnum, uint8_t dev_address, uint8_t speed, - uint8_t ep_type, uint16_t mps) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t HCcharEpDir; - uint32_t HCcharLowSpeed; - uint32_t HostCoreSpeed; - - /* Clear old interrupt conditions for this host channel. */ - USBx_HC((uint32_t)ch_num)->HCINT = 0xFFFFFFFFU; - - /* Enable channel interrupts required for this transfer. */ - switch (ep_type) - { - case EP_TYPE_CTRL: - case EP_TYPE_BULK: - USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | - USB_OTG_HCINTMSK_STALLM | - USB_OTG_HCINTMSK_TXERRM | - USB_OTG_HCINTMSK_DTERRM | - USB_OTG_HCINTMSK_AHBERR | - USB_OTG_HCINTMSK_NAKM; - - if ((epnum & 0x80U) == 0x80U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; - } - else - { - if ((USBx->CID & (0x1U << 8)) != 0U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET | - USB_OTG_HCINTMSK_ACKM; - } - } - break; - - case EP_TYPE_INTR: - USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | - USB_OTG_HCINTMSK_STALLM | - USB_OTG_HCINTMSK_TXERRM | - USB_OTG_HCINTMSK_DTERRM | - USB_OTG_HCINTMSK_NAKM | - USB_OTG_HCINTMSK_AHBERR | - USB_OTG_HCINTMSK_FRMORM; - - if ((epnum & 0x80U) == 0x80U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; - } - - break; - - case EP_TYPE_ISOC: - USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | - USB_OTG_HCINTMSK_ACKM | - USB_OTG_HCINTMSK_AHBERR | - USB_OTG_HCINTMSK_FRMORM; - - if ((epnum & 0x80U) == 0x80U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); - } - break; - - default: - ret = HAL_ERROR; - break; - } - - /* Enable host channel Halt interrupt */ - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM; - - /* Enable the top level host channel interrupt. */ - USBx_HOST->HAINTMSK |= 1UL << (ch_num & 0xFU); - - /* Make sure host channel interrupts are enabled. */ - USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; - - /* Program the HCCHAR register */ - if ((epnum & 0x80U) == 0x80U) - { - HCcharEpDir = (0x1U << 15) & USB_OTG_HCCHAR_EPDIR; - } - else - { - HCcharEpDir = 0U; - } - - HostCoreSpeed = USB_GetHostSpeed(USBx); - - /* LS device plugged to HUB */ - if ((speed == HPRT0_PRTSPD_LOW_SPEED) && (HostCoreSpeed != HPRT0_PRTSPD_LOW_SPEED)) - { - HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV; - } - else - { - HCcharLowSpeed = 0U; - } - - USBx_HC((uint32_t)ch_num)->HCCHAR = (((uint32_t)dev_address << 22) & USB_OTG_HCCHAR_DAD) | - ((((uint32_t)epnum & 0x7FU) << 11) & USB_OTG_HCCHAR_EPNUM) | - (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) | - ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | HCcharEpDir | HCcharLowSpeed; - - if ((ep_type == EP_TYPE_INTR) || (ep_type == EP_TYPE_ISOC)) - { - USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; - } - - return ret; -} - -/** - * @brief Start a transfer over a host channel - * @param USBx Selected device - * @param hc pointer to host channel structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @retval HAL state - */ -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t ch_num = (uint32_t)hc->ch_num; - __IO uint32_t tmpreg; - uint8_t is_oddframe; - uint16_t len_words; - uint16_t num_packets; - uint16_t max_hc_pkt_count = 256U; - - if (((USBx->CID & (0x1U << 8)) != 0U) && (hc->speed == USBH_HS_SPEED)) - { - /* in DMA mode host Core automatically issues ping in case of NYET/NAK */ - if ((dma == 1U) && ((hc->ep_type == EP_TYPE_CTRL) || (hc->ep_type == EP_TYPE_BULK))) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | - USB_OTG_HCINTMSK_ACKM | - USB_OTG_HCINTMSK_NAKM); - } - - if ((dma == 0U) && (hc->do_ping == 1U)) - { - (void)USB_DoPing(USBx, hc->ch_num); - return HAL_OK; - } - - } - - /* Compute the expected number of packets associated to the transfer */ - if (hc->xfer_len > 0U) - { - num_packets = (uint16_t)((hc->xfer_len + hc->max_packet - 1U) / hc->max_packet); - - if (num_packets > max_hc_pkt_count) - { - num_packets = max_hc_pkt_count; - hc->XferSize = (uint32_t)num_packets * hc->max_packet; - } - } - else - { - num_packets = 1U; - } - - /* - * For IN channel HCTSIZ.XferSize is expected to be an integer multiple of - * max_packet size. - */ - if (hc->ep_is_in != 0U) - { - hc->XferSize = (uint32_t)num_packets * hc->max_packet; - } - else - { - hc->XferSize = hc->xfer_len; - } - - /* Initialize the HCTSIZn register */ - USBx_HC(ch_num)->HCTSIZ = (hc->XferSize & USB_OTG_HCTSIZ_XFRSIZ) | - (((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | - (((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID); - - if (dma != 0U) - { - /* xfer_buff MUST be 32-bits aligned */ - USBx_HC(ch_num)->HCDMA = (uint32_t)hc->xfer_buff; - } - - is_oddframe = (((uint32_t)USBx_HOST->HFNUM & 0x01U) != 0U) ? 0U : 1U; - USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; - USBx_HC(ch_num)->HCCHAR |= (uint32_t)is_oddframe << 29; - - /* Set host channel enable */ - tmpreg = USBx_HC(ch_num)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - - /* make sure to set the correct ep direction */ - if (hc->ep_is_in != 0U) - { - tmpreg |= USB_OTG_HCCHAR_EPDIR; - } - else - { - tmpreg &= ~USB_OTG_HCCHAR_EPDIR; - } - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(ch_num)->HCCHAR = tmpreg; - - if (dma != 0U) /* dma mode */ - { - return HAL_OK; - } - - if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U)) - { - switch (hc->ep_type) - { - /* Non periodic transfer */ - case EP_TYPE_CTRL: - case EP_TYPE_BULK: - - len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); - - /* check if there is enough space in FIFO space */ - if (len_words > (USBx->HNPTXSTS & 0xFFFFU)) - { - /* need to process data in nptxfempty interrupt */ - USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; - } - break; - - /* Periodic transfer */ - case EP_TYPE_INTR: - case EP_TYPE_ISOC: - len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); - /* check if there is enough space in FIFO space */ - if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */ - { - /* need to process data in ptxfempty interrupt */ - USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; - } - break; - - default: - break; - } - - /* Write packet into the Tx FIFO. */ - (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len, 0); - } - - return HAL_OK; -} - -/** - * @brief Read all host channel interrupts status - * @param USBx Selected device - * @retval HAL state - */ -uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - return ((USBx_HOST->HAINT) & 0xFFFFU); -} - -/** - * @brief Halt a host channel - * @param USBx Selected device - * @param hc_num Host Channel number - * This parameter can be a value from 1 to 15 - * @retval HAL state - */ -HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t hcnum = (uint32_t)hc_num; - __IO uint32_t count = 0U; - uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18; - uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31; - - if (((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) && - (ChannelEna == 0U)) - { - return HAL_OK; - } - - /* Check for space in the request queue to issue the halt. */ - if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK)) - { - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; - - if ((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == 0U) - { - if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U) - { - USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - do - { - count++; - - if (count > 1000U) - { - break; - } - } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - else - { - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - } - } - } - else - { - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; - - if ((USBx_HOST->HPTXSTS & (0xFFU << 16)) == 0U) - { - USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - do - { - count++; - - if (count > 1000U) - { - break; - } - } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - else - { - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - } - } - - return HAL_OK; -} - -/** - * @brief Initiate Do Ping protocol - * @param USBx Selected device - * @param hc_num Host Channel number - * This parameter can be a value from 1 to 15 - * @retval HAL state - */ -HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t chnum = (uint32_t)ch_num; - uint32_t num_packets = 1U; - uint32_t tmpreg; - - USBx_HC(chnum)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | - USB_OTG_HCTSIZ_DOPING; - - /* Set host channel enable */ - tmpreg = USBx_HC(chnum)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(chnum)->HCCHAR = tmpreg; - - return HAL_OK; -} - -/** - * @brief Stop Host Core - * @param USBx Selected device - * @retval HAL state - */ -HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - __IO uint32_t count = 0U; - uint32_t value; - uint32_t i; - - (void)USB_DisableGlobalInt(USBx); - - /* Flush USB FIFO */ - if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ - { - ret = HAL_ERROR; - } - - if (USB_FlushRxFifo(USBx) != HAL_OK) - { - ret = HAL_ERROR; - } - - /* Flush out any leftover queued requests. */ - for (i = 0U; i <= 15U; i++) - { - value = USBx_HC(i)->HCCHAR; - value |= USB_OTG_HCCHAR_CHDIS; - value &= ~USB_OTG_HCCHAR_CHENA; - value &= ~USB_OTG_HCCHAR_EPDIR; - USBx_HC(i)->HCCHAR = value; - } - - /* Halt all channels to put them into a known state. */ - for (i = 0U; i <= 15U; i++) - { - value = USBx_HC(i)->HCCHAR; - value |= USB_OTG_HCCHAR_CHDIS; - value |= USB_OTG_HCCHAR_CHENA; - value &= ~USB_OTG_HCCHAR_EPDIR; - USBx_HC(i)->HCCHAR = value; - - do - { - count++; - - if (count > 1000U) - { - break; - } - } while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - - /* Clear any pending Host interrupts */ - USBx_HOST->HAINT = 0xFFFFFFFFU; - USBx->GINTSTS = 0xFFFFFFFFU; - - (void)USB_EnableGlobalInt(USBx); - - return ret; -} - -/** - * @brief USB_ActivateRemoteWakeup active remote wakeup signalling - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) - { - /* active Remote wakeup signalling */ - USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; - } - - return HAL_OK; -} - -/** - * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - /* active Remote wakeup signalling */ - USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); - - return HAL_OK; -} -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ - -/** - * @} - */ diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Inc/usbh_cdc.h b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Inc/usbh_cdc.h deleted file mode 100644 index 772e5b7..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Inc/usbh_cdc.h +++ /dev/null @@ -1,448 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_cdc.h - * @author MCD Application Team - * @brief This file contains all the prototypes for the usbh_cdc.c - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Define to prevent recursive ----------------------------------------------*/ -#ifndef __USBH_CDC_H -#define __USBH_CDC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_core.h" - - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_CLASS - * @{ - */ - -/** @addtogroup USBH_CDC_CLASS - * @{ - */ - -/** @defgroup USBH_CDC_CORE - * @brief This file is the Header file for usbh_core.c - * @{ - */ - - - - -/*Communication Class codes*/ -#define USB_CDC_CLASS 0x02U -#define COMMUNICATION_INTERFACE_CLASS_CODE 0x02U - -/*Data Interface Class Codes*/ -#define DATA_INTERFACE_CLASS_CODE 0x0AU - -/*Communication sub class codes*/ -#define RESERVED 0x00U -#define DIRECT_LINE_CONTROL_MODEL 0x01U -#define ABSTRACT_CONTROL_MODEL 0x02U -#define TELEPHONE_CONTROL_MODEL 0x03U -#define MULTICHANNEL_CONTROL_MODEL 0x04U -#define CAPI_CONTROL_MODEL 0x05U -#define ETHERNET_NETWORKING_CONTROL_MODEL 0x06U -#define ATM_NETWORKING_CONTROL_MODEL 0x07U - - -/*Communication Interface Class Control Protocol Codes*/ -#define NO_CLASS_SPECIFIC_PROTOCOL_CODE 0x00U -#define COMMON_AT_COMMAND 0x01U -#define VENDOR_SPECIFIC 0xFFU - - -#define CS_INTERFACE 0x24U -#define CDC_PAGE_SIZE_64 0x40U - -/*Class-Specific Request Codes*/ -#define CDC_SEND_ENCAPSULATED_COMMAND 0x00U -#define CDC_GET_ENCAPSULATED_RESPONSE 0x01U -#define CDC_SET_COMM_FEATURE 0x02U -#define CDC_GET_COMM_FEATURE 0x03U -#define CDC_CLEAR_COMM_FEATURE 0x04U - -#define CDC_SET_AUX_LINE_STATE 0x10U -#define CDC_SET_HOOK_STATE 0x11U -#define CDC_PULSE_SETUP 0x12U -#define CDC_SEND_PULSE 0x13U -#define CDC_SET_PULSE_TIME 0x14U -#define CDC_RING_AUX_JACK 0x15U - -#define CDC_SET_LINE_CODING 0x20U -#define CDC_GET_LINE_CODING 0x21U -#define CDC_SET_CONTROL_LINE_STATE 0x22U -#define CDC_SEND_BREAK 0x23U - -#define CDC_SET_RINGER_PARMS 0x30U -#define CDC_GET_RINGER_PARMS 0x31U -#define CDC_SET_OPERATION_PARMS 0x32U -#define CDC_GET_OPERATION_PARMS 0x33U -#define CDC_SET_LINE_PARMS 0x34U -#define CDC_GET_LINE_PARMS 0x35U -#define CDC_DIAL_DIGITS 0x36U -#define CDC_SET_UNIT_PARAMETER 0x37U -#define CDC_GET_UNIT_PARAMETER 0x38U -#define CDC_CLEAR_UNIT_PARAMETER 0x39U -#define CDC_GET_PROFILE 0x3AU - -#define CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40U -#define CDC_SET_ETHERNET_POWER_MANAGEMENT_PATTERN FILTER 0x41U -#define CDC_GET_ETHERNET_POWER_MANAGEMENT_PATTERN FILTER 0x42U -#define CDC_SET_ETHERNET_PACKET_FILTER 0x43U -#define CDC_GET_ETHERNET_STATISTIC 0x44U - -#define CDC_SET_ATM_DATA_FORMAT 0x50U -#define CDC_GET_ATM_DEVICE_STATISTICS 0x51U -#define CDC_SET_ATM_DEFAULT_VC 0x52U -#define CDC_GET_ATM_VC_STATISTICS 0x53U - - -/* wValue for SetControlLineState*/ -#define CDC_ACTIVATE_CARRIER_SIGNAL_RTS 0x0002U -#define CDC_DEACTIVATE_CARRIER_SIGNAL_RTS 0x0000U -#define CDC_ACTIVATE_SIGNAL_DTR 0x0001U -#define CDC_DEACTIVATE_SIGNAL_DTR 0x0000U - -#define LINE_CODING_STRUCTURE_SIZE 0x07U -/** - * @} - */ - -/** @defgroup USBH_CDC_CORE_Exported_Types - * @{ - */ - -/* States for CDC State Machine */ -typedef enum -{ - CDC_IDLE = 0U, - CDC_SEND_DATA, - CDC_SEND_DATA_WAIT, - CDC_RECEIVE_DATA, - CDC_RECEIVE_DATA_WAIT, -} -CDC_DataStateTypeDef; - -typedef enum -{ - CDC_IDLE_STATE = 0U, - CDC_SET_LINE_CODING_STATE, - CDC_GET_LAST_LINE_CODING_STATE, - CDC_TRANSFER_DATA, - CDC_ERROR_STATE, -} -CDC_StateTypeDef; - - -/*Line coding structure*/ -typedef union _CDC_LineCodingStructure -{ - uint8_t Array[LINE_CODING_STRUCTURE_SIZE]; - - struct - { - - uint32_t dwDTERate; /*Data terminal rate, in bits per second*/ - uint8_t bCharFormat; /*Stop bits - 0 - 1 Stop bit - 1 - 1.5 Stop bits - 2 - 2 Stop bits*/ - uint8_t bParityType; /* Parity - 0 - None - 1 - Odd - 2 - Even - 3 - Mark - 4 - Space*/ - uint8_t bDataBits; /* Data bits (5, 6, 7, 8 or 16). */ - } b; -} -CDC_LineCodingTypeDef; - - - -/* Header Functional Descriptor --------------------------------------------------------------------------------- -Offset| field | Size | Value | Description -------|---------------------|-------|------------|------------------------------ -0 | bFunctionLength | 1 | number | Size of this descriptor. -1 | bDescriptorType | 1 | Constant | CS_INTERFACE (0x24) -2 | bDescriptorSubtype | 1 | Constant | Identifier (ID) of functional - | | | | descriptor. -3 | bcdCDC | 2 | | - | | | Number | USB Class Definitions for - | | | | Communication Devices Specification - | | | | release number in binary-coded - | | | | decimal -------|---------------------|-------|------------|------------------------------ - */ -typedef struct _FunctionalDescriptorHeader -{ - uint8_t bLength; /*Size of this descriptor.*/ - uint8_t bDescriptorType; /*CS_INTERFACE (0x24)*/ - uint8_t bDescriptorSubType; /* Header functional descriptor subtype as*/ - uint16_t bcdCDC; /* USB Class Definitions for Communication - Devices Specification release number in - binary-coded decimal. */ -} -CDC_HeaderFuncDesc_TypeDef; -/* Call Management Functional Descriptor --------------------------------------------------------------------------------- -Offset| field | Size | Value | Description -------|---------------------|-------|------------|------------------------------ -0 | bFunctionLength | 1 | number | Size of this descriptor. -1 | bDescriptorType | 1 | Constant | CS_INTERFACE (0x24) -2 | bDescriptorSubtype | 1 | Constant | Call Management functional - | | | | descriptor subtype. -3 | bmCapabilities | 1 | Bitmap | The capabilities that this configuration - | | | | supports: - | | | | D7..D2: RESERVED (Reset to zero) - | | | | D1: 0 - Device sends/receives call - | | | | management information only over - | | | | the Communication Class - | | | | interface. - | | | | 1 - Device can send/receive call - | \ | | management information over a - | | | | Data Class interface. - | | | | D0: 0 - Device does not handle call - | | | | management itself. - | | | | 1 - Device handles call - | | | | management itself. - | | | | The previous bits, in combination, identify - | | | | which call management scenario is used. If bit - | | | | D0 is reset to 0, then the value of bit D1 is - | | | | ignored. In this case, bit D1 is reset to zero for - | | | | future compatibility. -4 | bDataInterface | 1 | Number | Interface number of Data Class interface - | | | | optionally used for call management. -------|---------------------|-------|------------|------------------------------ - */ -typedef struct _CallMgmtFunctionalDescriptor -{ - uint8_t bLength; /*Size of this functional descriptor, in bytes.*/ - uint8_t bDescriptorType; /*CS_INTERFACE (0x24)*/ - uint8_t bDescriptorSubType; /* Call Management functional descriptor subtype*/ - uint8_t bmCapabilities; /* bmCapabilities: D0+D1 */ - uint8_t bDataInterface; /*bDataInterface: 1*/ -} -CDC_CallMgmtFuncDesc_TypeDef; -/* Abstract Control Management Functional Descriptor --------------------------------------------------------------------------------- -Offset| field | Size | Value | Description -------|---------------------|-------|------------|------------------------------ -0 | bFunctionLength | 1 | number | Size of functional descriptor, in bytes. -1 | bDescriptorType | 1 | Constant | CS_INTERFACE (0x24) -2 | bDescriptorSubtype | 1 | Constant | Abstract Control Management - | | | | functional descriptor subtype. -3 | bmCapabilities | 1 | Bitmap | The capabilities that this configuration - | | | | supports ((A bit value of zero means that the - | | | | request is not supported.) ) - D7..D4: RESERVED (Reset to zero) - | | | | D3: 1 - Device supports the notification - | | | | Network_Connection. - | | | | D2: 1 - Device supports the request - | | | | Send_Break - | | | | D1: 1 - Device supports the request - | \ | | combination of Set_Line_Coding, - | | | | Set_Control_Line_State, Get_Line_Coding, and the - notification Serial_State. - | | | | D0: 1 - Device supports the request - | | | | combination of Set_Comm_Feature, - | | | | Clear_Comm_Feature, and Get_Comm_Feature. - | | | | The previous bits, in combination, identify - | | | | which requests/notifications are supported by - | | | | a Communication Class interface with the - | | | | SubClass code of Abstract Control Model. -------|---------------------|-------|------------|------------------------------ - */ -typedef struct _AbstractCntrlMgmtFunctionalDescriptor -{ - uint8_t bLength; /*Size of this functional descriptor, in bytes.*/ - uint8_t bDescriptorType; /*CS_INTERFACE (0x24)*/ - uint8_t bDescriptorSubType; /* Abstract Control Management functional - descriptor subtype*/ - uint8_t bmCapabilities; /* The capabilities that this configuration supports */ -} -CDC_AbstCntrlMgmtFuncDesc_TypeDef; -/* Union Functional Descriptor --------------------------------------------------------------------------------- -Offset| field | Size | Value | Description -------|---------------------|-------|------------|------------------------------ -0 | bFunctionLength | 1 | number | Size of this descriptor. -1 | bDescriptorType | 1 | Constant | CS_INTERFACE (0x24) -2 | bDescriptorSubtype | 1 | Constant | Union functional - | | | | descriptor subtype. -3 | bMasterInterface | 1 | Constant | The interface number of the - | | | | Communication or Data Class interface -4 | bSlaveInterface0 | 1 | Number | nterface number of first slave or associated - | | | | interface in the union. -------|---------------------|-------|------------|------------------------------ - */ -typedef struct _UnionFunctionalDescriptor -{ - uint8_t bLength; /*Size of this functional descriptor, in bytes*/ - uint8_t bDescriptorType; /*CS_INTERFACE (0x24)*/ - uint8_t bDescriptorSubType; /* Union functional descriptor SubType*/ - uint8_t bMasterInterface; /* The interface number of the Communication or - Data Class interface,*/ - uint8_t bSlaveInterface0; /*Interface number of first slave*/ -} -CDC_UnionFuncDesc_TypeDef; - -typedef struct _USBH_CDCInterfaceDesc -{ - CDC_HeaderFuncDesc_TypeDef CDC_HeaderFuncDesc; - CDC_CallMgmtFuncDesc_TypeDef CDC_CallMgmtFuncDesc; - CDC_AbstCntrlMgmtFuncDesc_TypeDef CDC_AbstCntrlMgmtFuncDesc; - CDC_UnionFuncDesc_TypeDef CDC_UnionFuncDesc; -} -CDC_InterfaceDesc_Typedef; - - -/* Structure for CDC process */ -typedef struct -{ - uint8_t NotifPipe; - uint8_t NotifEp; - uint8_t buff[8]; - uint16_t NotifEpSize; -} -CDC_CommItfTypedef ; - -typedef struct -{ - uint8_t InPipe; - uint8_t OutPipe; - uint8_t OutEp; - uint8_t InEp; - uint8_t buff[8]; - uint16_t OutEpSize; - uint16_t InEpSize; -} -CDC_DataItfTypedef ; - -/* Structure for CDC process */ -typedef struct _CDC_Process -{ - CDC_CommItfTypedef CommItf; - CDC_DataItfTypedef DataItf; - uint8_t *pTxData; - uint8_t *pRxData; - uint32_t TxDataLength; - uint32_t RxDataLength; - CDC_InterfaceDesc_Typedef CDC_Desc; - CDC_LineCodingTypeDef LineCoding; - CDC_LineCodingTypeDef *pUserLineCoding; - CDC_StateTypeDef state; - CDC_DataStateTypeDef data_tx_state; - CDC_DataStateTypeDef data_rx_state; - uint8_t Rx_Poll; -} -CDC_HandleTypeDef; - -/** - * @} - */ - -/** @defgroup USBH_CDC_CORE_Exported_Defines - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBH_CDC_CORE_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_CDC_CORE_Exported_Variables - * @{ - */ -extern USBH_ClassTypeDef CDC_Class; -#define USBH_CDC_CLASS &CDC_Class - -/** - * @} - */ - -/** @defgroup USBH_CDC_CORE_Exported_FunctionsPrototype - * @{ - */ - -USBH_StatusTypeDef USBH_CDC_SetLineCoding(USBH_HandleTypeDef *phost, - CDC_LineCodingTypeDef *linecoding); - -USBH_StatusTypeDef USBH_CDC_GetLineCoding(USBH_HandleTypeDef *phost, - CDC_LineCodingTypeDef *linecoding); - -USBH_StatusTypeDef USBH_CDC_Transmit(USBH_HandleTypeDef *phost, - uint8_t *pbuff, - uint32_t length); - -USBH_StatusTypeDef USBH_CDC_Receive(USBH_HandleTypeDef *phost, - uint8_t *pbuff, - uint32_t length); - - -uint16_t USBH_CDC_GetLastReceivedDataSize(USBH_HandleTypeDef *phost); - -USBH_StatusTypeDef USBH_CDC_Stop(USBH_HandleTypeDef *phost); - -void USBH_CDC_LineCodingChanged(USBH_HandleTypeDef *phost); - -void USBH_CDC_TransmitCallback(USBH_HandleTypeDef *phost); - -void USBH_CDC_ReceiveCallback(USBH_HandleTypeDef *phost); - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USBH_CDC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Src/usbh_cdc.c b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Src/usbh_cdc.c deleted file mode 100644 index 7cf570c..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Src/usbh_cdc.c +++ /dev/null @@ -1,837 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_cdc.c - * @author MCD Application Team - * @brief This file is the CDC Layer Handlers for USB Host CDC class. - * - * @verbatim - * - * =================================================================== - * CDC Class Driver Description - * =================================================================== - * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices - * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus - * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007" - * This driver implements the following aspects of the specification: - * - Device descriptor management - * - Configuration descriptor management - * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN) - * - Requests management (as described in section 6.2 in specification) - * - Abstract Control Model compliant - * - Union Functional collection (using 1 IN endpoint for control) - * - Data interface class - * - * @endverbatim - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* BSPDependencies -- "stm32xxxxx_{eval}{discovery}{nucleo_144}.c" -- "stm32xxxxx_{eval}{discovery}_io.c" -- "stm32xxxxx_{eval}{discovery}{adafruit}_sd.c" -- "stm32xxxxx_{eval}{discovery}{adafruit}_lcd.c" -- "stm32xxxxx_{eval}{discovery}_sdram.c" -EndBSPDependencies */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_cdc.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_CLASS - * @{ - */ - -/** @addtogroup USBH_CDC_CLASS - * @{ - */ - -/** @defgroup USBH_CDC_CORE - * @brief This file includes CDC Layer Handlers for USB Host CDC class. - * @{ - */ - -/** @defgroup USBH_CDC_CORE_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_CDC_CORE_Private_Defines - * @{ - */ -#define USBH_CDC_BUFFER_SIZE 1024 -/** - * @} - */ - - -/** @defgroup USBH_CDC_CORE_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_CDC_CORE_Private_Variables - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_CDC_CORE_Private_FunctionPrototypes - * @{ - */ - -static USBH_StatusTypeDef USBH_CDC_InterfaceInit(USBH_HandleTypeDef *phost); - -static USBH_StatusTypeDef USBH_CDC_InterfaceDeInit(USBH_HandleTypeDef *phost); - -static USBH_StatusTypeDef USBH_CDC_Process(USBH_HandleTypeDef *phost); - -static USBH_StatusTypeDef USBH_CDC_SOFProcess(USBH_HandleTypeDef *phost); - -static USBH_StatusTypeDef USBH_CDC_ClassRequest(USBH_HandleTypeDef *phost); - -static USBH_StatusTypeDef GetLineCoding(USBH_HandleTypeDef *phost, - CDC_LineCodingTypeDef *linecoding); - -static USBH_StatusTypeDef SetLineCoding(USBH_HandleTypeDef *phost, - CDC_LineCodingTypeDef *linecoding); - -static void CDC_ProcessTransmission(USBH_HandleTypeDef *phost); - -static void CDC_ProcessReception(USBH_HandleTypeDef *phost); - -USBH_ClassTypeDef CDC_Class = -{ - "CDC", - USB_CDC_CLASS, - USBH_CDC_InterfaceInit, - USBH_CDC_InterfaceDeInit, - USBH_CDC_ClassRequest, - USBH_CDC_Process, - USBH_CDC_SOFProcess, - NULL, -}; -/** - * @} - */ - - -/** @defgroup USBH_CDC_CORE_Private_Functions - * @{ - */ - -/** - * @brief USBH_CDC_InterfaceInit - * The function init the CDC class. - * @param phost: Host handle - * @retval USBH Status - */ -static USBH_StatusTypeDef USBH_CDC_InterfaceInit(USBH_HandleTypeDef *phost) -{ - - USBH_StatusTypeDef status; - uint8_t interface; - CDC_HandleTypeDef *CDC_Handle; - - interface = USBH_FindInterface(phost, COMMUNICATION_INTERFACE_CLASS_CODE, - ABSTRACT_CONTROL_MODEL, COMMON_AT_COMMAND); - - if ((interface == 0xFFU) || (interface >= USBH_MAX_NUM_INTERFACES)) /* No Valid Interface */ - { - USBH_DbgLog("Cannot Find the interface for Communication Interface Class.", phost->pActiveClass->Name); - return USBH_FAIL; - } - - status = USBH_SelectInterface(phost, interface); - - if (status != USBH_OK) - { - return USBH_FAIL; - } - - phost->pActiveClass->pData = (CDC_HandleTypeDef *)USBH_malloc(sizeof(CDC_HandleTypeDef)); - CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - if (CDC_Handle == NULL) - { - USBH_DbgLog("Cannot allocate memory for CDC Handle"); - return USBH_FAIL; - } - - /* Initialize cdc handler */ - (void)USBH_memset(CDC_Handle, 0, sizeof(CDC_HandleTypeDef)); - - /*Collect the notification endpoint address and length*/ - if ((phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[0].bEndpointAddress & 0x80U) != 0U) - { - CDC_Handle->CommItf.NotifEp = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[0].bEndpointAddress; - CDC_Handle->CommItf.NotifEpSize = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[0].wMaxPacketSize; - } - - /*Allocate the length for host channel number in*/ - CDC_Handle->CommItf.NotifPipe = USBH_AllocPipe(phost, CDC_Handle->CommItf.NotifEp); - - /* Open pipe for Notification endpoint */ - (void)USBH_OpenPipe(phost, CDC_Handle->CommItf.NotifPipe, CDC_Handle->CommItf.NotifEp, - phost->device.address, phost->device.speed, USB_EP_TYPE_INTR, - CDC_Handle->CommItf.NotifEpSize); - - (void)USBH_LL_SetToggle(phost, CDC_Handle->CommItf.NotifPipe, 0U); - - interface = USBH_FindInterface(phost, DATA_INTERFACE_CLASS_CODE, - RESERVED, NO_CLASS_SPECIFIC_PROTOCOL_CODE); - - if ((interface == 0xFFU) || (interface >= USBH_MAX_NUM_INTERFACES)) /* No Valid Interface */ - { - USBH_DbgLog("Cannot Find the interface for Data Interface Class.", phost->pActiveClass->Name); - return USBH_FAIL; - } - - /*Collect the class specific endpoint address and length*/ - if ((phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[0].bEndpointAddress & 0x80U) != 0U) - { - CDC_Handle->DataItf.InEp = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[0].bEndpointAddress; - CDC_Handle->DataItf.InEpSize = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[0].wMaxPacketSize; - } - else - { - CDC_Handle->DataItf.OutEp = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[0].bEndpointAddress; - CDC_Handle->DataItf.OutEpSize = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[0].wMaxPacketSize; - } - - if ((phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[1].bEndpointAddress & 0x80U) != 0U) - { - CDC_Handle->DataItf.InEp = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[1].bEndpointAddress; - CDC_Handle->DataItf.InEpSize = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[1].wMaxPacketSize; - } - else - { - CDC_Handle->DataItf.OutEp = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[1].bEndpointAddress; - CDC_Handle->DataItf.OutEpSize = phost->device.CfgDesc.Itf_Desc[interface].Ep_Desc[1].wMaxPacketSize; - } - - /*Allocate the length for host channel number out*/ - CDC_Handle->DataItf.OutPipe = USBH_AllocPipe(phost, CDC_Handle->DataItf.OutEp); - - /*Allocate the length for host channel number in*/ - CDC_Handle->DataItf.InPipe = USBH_AllocPipe(phost, CDC_Handle->DataItf.InEp); - - /* Open channel for OUT endpoint */ - (void)USBH_OpenPipe(phost, CDC_Handle->DataItf.OutPipe, CDC_Handle->DataItf.OutEp, - phost->device.address, phost->device.speed, USB_EP_TYPE_BULK, - CDC_Handle->DataItf.OutEpSize); - - /* Open channel for IN endpoint */ - (void)USBH_OpenPipe(phost, CDC_Handle->DataItf.InPipe, CDC_Handle->DataItf.InEp, - phost->device.address, phost->device.speed, USB_EP_TYPE_BULK, - CDC_Handle->DataItf.InEpSize); - - CDC_Handle->state = CDC_IDLE_STATE; - - (void)USBH_LL_SetToggle(phost, CDC_Handle->DataItf.OutPipe, 0U); - (void)USBH_LL_SetToggle(phost, CDC_Handle->DataItf.InPipe, 0U); - - return USBH_OK; -} - - - -/** - * @brief USBH_CDC_InterfaceDeInit - * The function DeInit the Pipes used for the CDC class. - * @param phost: Host handle - * @retval USBH Status - */ -static USBH_StatusTypeDef USBH_CDC_InterfaceDeInit(USBH_HandleTypeDef *phost) -{ - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - if ((CDC_Handle->CommItf.NotifPipe) != 0U) - { - (void)USBH_ClosePipe(phost, CDC_Handle->CommItf.NotifPipe); - (void)USBH_FreePipe(phost, CDC_Handle->CommItf.NotifPipe); - CDC_Handle->CommItf.NotifPipe = 0U; /* Reset the Channel as Free */ - } - - if ((CDC_Handle->DataItf.InPipe) != 0U) - { - (void)USBH_ClosePipe(phost, CDC_Handle->DataItf.InPipe); - (void)USBH_FreePipe(phost, CDC_Handle->DataItf.InPipe); - CDC_Handle->DataItf.InPipe = 0U; /* Reset the Channel as Free */ - } - - if ((CDC_Handle->DataItf.OutPipe) != 0U) - { - (void)USBH_ClosePipe(phost, CDC_Handle->DataItf.OutPipe); - (void)USBH_FreePipe(phost, CDC_Handle->DataItf.OutPipe); - CDC_Handle->DataItf.OutPipe = 0U; /* Reset the Channel as Free */ - } - - if ((phost->pActiveClass->pData) != NULL) - { - USBH_free(phost->pActiveClass->pData); - phost->pActiveClass->pData = 0U; - } - - return USBH_OK; -} - -/** - * @brief USBH_CDC_ClassRequest - * The function is responsible for handling Standard requests - * for CDC class. - * @param phost: Host handle - * @retval USBH Status - */ -static USBH_StatusTypeDef USBH_CDC_ClassRequest(USBH_HandleTypeDef *phost) -{ - USBH_StatusTypeDef status; - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - /* Issue the get line coding request */ - status = GetLineCoding(phost, &CDC_Handle->LineCoding); - if (status == USBH_OK) - { - phost->pUser(phost, HOST_USER_CLASS_ACTIVE); - } - else if (status == USBH_NOT_SUPPORTED) - { - USBH_ErrLog("Control error: CDC: Device Get Line Coding configuration failed"); - } - else - { - /* .. */ - } - - return status; -} - - -/** - * @brief USBH_CDC_Process - * The function is for managing state machine for CDC data transfers - * @param phost: Host handle - * @retval USBH Status - */ -static USBH_StatusTypeDef USBH_CDC_Process(USBH_HandleTypeDef *phost) -{ - USBH_StatusTypeDef status = USBH_BUSY; - USBH_StatusTypeDef req_status = USBH_OK; - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - switch (CDC_Handle->state) - { - - case CDC_IDLE_STATE: - status = USBH_OK; - break; - - case CDC_SET_LINE_CODING_STATE: - req_status = SetLineCoding(phost, CDC_Handle->pUserLineCoding); - - if (req_status == USBH_OK) - { - CDC_Handle->state = CDC_GET_LAST_LINE_CODING_STATE; - } - - else - { - if (req_status != USBH_BUSY) - { - CDC_Handle->state = CDC_ERROR_STATE; - } - } - break; - - - case CDC_GET_LAST_LINE_CODING_STATE: - req_status = GetLineCoding(phost, &(CDC_Handle->LineCoding)); - - if (req_status == USBH_OK) - { - CDC_Handle->state = CDC_IDLE_STATE; - - if ((CDC_Handle->LineCoding.b.bCharFormat == CDC_Handle->pUserLineCoding->b.bCharFormat) && - (CDC_Handle->LineCoding.b.bDataBits == CDC_Handle->pUserLineCoding->b.bDataBits) && - (CDC_Handle->LineCoding.b.bParityType == CDC_Handle->pUserLineCoding->b.bParityType) && - (CDC_Handle->LineCoding.b.dwDTERate == CDC_Handle->pUserLineCoding->b.dwDTERate)) - { - USBH_CDC_LineCodingChanged(phost); - } - } - else - { - if (req_status != USBH_BUSY) - { - CDC_Handle->state = CDC_ERROR_STATE; - } - } - break; - - case CDC_TRANSFER_DATA: - CDC_ProcessTransmission(phost); - CDC_ProcessReception(phost); - break; - - case CDC_ERROR_STATE: - req_status = USBH_ClrFeature(phost, 0x00U); - - if (req_status == USBH_OK) - { - /*Change the state to waiting*/ - CDC_Handle->state = CDC_IDLE_STATE; - } - break; - - default: - break; - - } - - return status; -} - -/** - * @brief USBH_CDC_SOFProcess - * The function is for managing SOF callback - * @param phost: Host handle - * @retval USBH Status - */ -static USBH_StatusTypeDef USBH_CDC_SOFProcess(USBH_HandleTypeDef *phost) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(phost); - - return USBH_OK; -} - - -/** - * @brief USBH_CDC_Stop - * Stop current CDC Transmission - * @param phost: Host handle - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_CDC_Stop(USBH_HandleTypeDef *phost) -{ - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - if (phost->gState == HOST_CLASS) - { - CDC_Handle->state = CDC_IDLE_STATE; - - (void)USBH_ClosePipe(phost, CDC_Handle->CommItf.NotifPipe); - (void)USBH_ClosePipe(phost, CDC_Handle->DataItf.InPipe); - (void)USBH_ClosePipe(phost, CDC_Handle->DataItf.OutPipe); - } - return USBH_OK; -} -/** - * @brief This request allows the host to find out the currently - * configured line coding. - * @param pdev: Selected device - * @retval USBH_StatusTypeDef : USB ctl xfer status - */ -static USBH_StatusTypeDef GetLineCoding(USBH_HandleTypeDef *phost, CDC_LineCodingTypeDef *linecoding) -{ - - phost->Control.setup.b.bmRequestType = USB_D2H | USB_REQ_TYPE_CLASS | \ - USB_REQ_RECIPIENT_INTERFACE; - - phost->Control.setup.b.bRequest = CDC_GET_LINE_CODING; - phost->Control.setup.b.wValue.w = 0U; - phost->Control.setup.b.wIndex.w = 0U; - phost->Control.setup.b.wLength.w = LINE_CODING_STRUCTURE_SIZE; - - return USBH_CtlReq(phost, linecoding->Array, LINE_CODING_STRUCTURE_SIZE); -} - - -/** - * @brief This request allows the host to specify typical asynchronous - * line-character formatting properties - * This request applies to asynchronous byte stream data class interfaces - * and endpoints - * @param pdev: Selected device - * @retval USBH_StatusTypeDef : USB ctl xfer status - */ -static USBH_StatusTypeDef SetLineCoding(USBH_HandleTypeDef *phost, - CDC_LineCodingTypeDef *linecoding) -{ - phost->Control.setup.b.bmRequestType = USB_H2D | USB_REQ_TYPE_CLASS | - USB_REQ_RECIPIENT_INTERFACE; - - phost->Control.setup.b.bRequest = CDC_SET_LINE_CODING; - phost->Control.setup.b.wValue.w = 0U; - - phost->Control.setup.b.wIndex.w = 0U; - - phost->Control.setup.b.wLength.w = LINE_CODING_STRUCTURE_SIZE; - - return USBH_CtlReq(phost, linecoding->Array, LINE_CODING_STRUCTURE_SIZE); -} - -/** - * @brief This function prepares the state before issuing the class specific commands - * @param None - * @retval None - */ -USBH_StatusTypeDef USBH_CDC_SetLineCoding(USBH_HandleTypeDef *phost, - CDC_LineCodingTypeDef *linecoding) -{ - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - if (phost->gState == HOST_CLASS) - { - CDC_Handle->state = CDC_SET_LINE_CODING_STATE; - CDC_Handle->pUserLineCoding = linecoding; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CLASS_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - - return USBH_OK; -} - -/** - * @brief This function prepares the state before issuing the class specific commands - * @param None - * @retval None - */ -USBH_StatusTypeDef USBH_CDC_GetLineCoding(USBH_HandleTypeDef *phost, - CDC_LineCodingTypeDef *linecoding) -{ - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - if ((phost->gState == HOST_CLASS) || (phost->gState == HOST_CLASS_REQUEST)) - { - *linecoding = CDC_Handle->LineCoding; - return USBH_OK; - } - else - { - return USBH_FAIL; - } -} - -/** - * @brief This function return last received data size - * @param None - * @retval None - */ -uint16_t USBH_CDC_GetLastReceivedDataSize(USBH_HandleTypeDef *phost) -{ - uint32_t dataSize; - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - if (phost->gState == HOST_CLASS) - { - dataSize = USBH_LL_GetLastXferSize(phost, CDC_Handle->DataItf.InPipe); - } - else - { - dataSize = 0U; - } - - return (uint16_t)dataSize; -} - -/** - * @brief This function prepares the state before issuing the class specific commands - * @param None - * @retval None - */ -USBH_StatusTypeDef USBH_CDC_Transmit(USBH_HandleTypeDef *phost, uint8_t *pbuff, uint32_t length) -{ - USBH_StatusTypeDef Status = USBH_BUSY; - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - if ((CDC_Handle->state == CDC_IDLE_STATE) || (CDC_Handle->state == CDC_TRANSFER_DATA)) - { - CDC_Handle->pTxData = pbuff; - CDC_Handle->TxDataLength = length; - CDC_Handle->state = CDC_TRANSFER_DATA; - CDC_Handle->data_tx_state = CDC_SEND_DATA; - Status = USBH_OK; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CLASS_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - return Status; -} - - -/** - * @brief This function prepares the state before issuing the class specific commands - * @param None - * @retval None - */ -USBH_StatusTypeDef USBH_CDC_Receive(USBH_HandleTypeDef *phost, uint8_t *pbuff, uint32_t length) -{ - USBH_StatusTypeDef Status = USBH_BUSY; - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - - if ((CDC_Handle->state == CDC_IDLE_STATE) || (CDC_Handle->state == CDC_TRANSFER_DATA)) - { - CDC_Handle->pRxData = pbuff; - CDC_Handle->RxDataLength = length; - CDC_Handle->state = CDC_TRANSFER_DATA; - CDC_Handle->data_rx_state = CDC_RECEIVE_DATA; - Status = USBH_OK; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CLASS_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - return Status; -} - -/** - * @brief The function is responsible for sending data to the device - * @param pdev: Selected device - * @retval None - */ -static void CDC_ProcessTransmission(USBH_HandleTypeDef *phost) -{ - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - USBH_URBStateTypeDef URB_Status = USBH_URB_IDLE; - - switch (CDC_Handle->data_tx_state) - { - case CDC_SEND_DATA: - if (CDC_Handle->TxDataLength > CDC_Handle->DataItf.OutEpSize) - { - (void)USBH_BulkSendData(phost, - CDC_Handle->pTxData, - CDC_Handle->DataItf.OutEpSize, - CDC_Handle->DataItf.OutPipe, - 1U); - } - else - { - (void)USBH_BulkSendData(phost, - CDC_Handle->pTxData, - (uint16_t)CDC_Handle->TxDataLength, - CDC_Handle->DataItf.OutPipe, - 1U); - } - - CDC_Handle->data_tx_state = CDC_SEND_DATA_WAIT; - break; - - case CDC_SEND_DATA_WAIT: - - URB_Status = USBH_LL_GetURBState(phost, CDC_Handle->DataItf.OutPipe); - - /* Check the status done for transmission */ - if (URB_Status == USBH_URB_DONE) - { - if (CDC_Handle->TxDataLength > CDC_Handle->DataItf.OutEpSize) - { - CDC_Handle->TxDataLength -= CDC_Handle->DataItf.OutEpSize; - CDC_Handle->pTxData += CDC_Handle->DataItf.OutEpSize; - } - else - { - CDC_Handle->TxDataLength = 0U; - } - - if (CDC_Handle->TxDataLength > 0U) - { - CDC_Handle->data_tx_state = CDC_SEND_DATA; - } - else - { - CDC_Handle->data_tx_state = CDC_IDLE; - USBH_CDC_TransmitCallback(phost); - } - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CLASS_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else - { - if (URB_Status == USBH_URB_NOTREADY) - { - CDC_Handle->data_tx_state = CDC_SEND_DATA; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CLASS_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - } - break; - - default: - break; - } -} -/** - * @brief This function responsible for reception of data from the device - * @param pdev: Selected device - * @retval None - */ - -static void CDC_ProcessReception(USBH_HandleTypeDef *phost) -{ - CDC_HandleTypeDef *CDC_Handle = (CDC_HandleTypeDef *) phost->pActiveClass->pData; - USBH_URBStateTypeDef URB_Status = USBH_URB_IDLE; - uint32_t length; - - switch (CDC_Handle->data_rx_state) - { - - case CDC_RECEIVE_DATA: - - (void)USBH_BulkReceiveData(phost, - CDC_Handle->pRxData, - CDC_Handle->DataItf.InEpSize, - CDC_Handle->DataItf.InPipe); - - CDC_Handle->data_rx_state = CDC_RECEIVE_DATA_WAIT; - - break; - - case CDC_RECEIVE_DATA_WAIT: - - URB_Status = USBH_LL_GetURBState(phost, CDC_Handle->DataItf.InPipe); - - /*Check the status done for reception*/ - if (URB_Status == USBH_URB_DONE) - { - length = USBH_LL_GetLastXferSize(phost, CDC_Handle->DataItf.InPipe); - - if (((CDC_Handle->RxDataLength - length) > 0U) && (length > CDC_Handle->DataItf.InEpSize)) - { - CDC_Handle->RxDataLength -= length ; - CDC_Handle->pRxData += length; - CDC_Handle->data_rx_state = CDC_RECEIVE_DATA; - } - else - { - CDC_Handle->data_rx_state = CDC_IDLE; - USBH_CDC_ReceiveCallback(phost); - } - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CLASS_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - break; - - default: - break; - } -} - -/** - * @brief The function informs user that data have been received - * @param pdev: Selected device - * @retval None - */ -__weak void USBH_CDC_TransmitCallback(USBH_HandleTypeDef *phost) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(phost); -} - -/** - * @brief The function informs user that data have been sent - * @param pdev: Selected device - * @retval None - */ -__weak void USBH_CDC_ReceiveCallback(USBH_HandleTypeDef *phost) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(phost); -} - -/** - * @brief The function informs user that Settings have been changed - * @param pdev: Selected device - * @retval None - */ -__weak void USBH_CDC_LineCodingChanged(USBH_HandleTypeDef *phost) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(phost); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_core.h b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_core.h deleted file mode 100644 index 8380db1..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_core.h +++ /dev/null @@ -1,192 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_core.h - * @author MCD Application Team - * @brief Header file for usbh_core.c - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ -/* Define to prevent recursive ----------------------------------------------*/ -#ifndef __USBH_CORE_H -#define __USBH_CORE_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_conf.h" -#include "usbh_def.h" -#include "usbh_ioreq.h" -#include "usbh_pipes.h" -#include "usbh_ctlreq.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_CORE - * @brief This file is the Header file for usbh_core.c - * @{ - */ - - -/** @defgroup USBH_CORE_Exported_Defines - * @{ - */ - -/** - * @} - */ -#define HOST_USER_SELECT_CONFIGURATION 0x01U -#define HOST_USER_CLASS_ACTIVE 0x02U -#define HOST_USER_CLASS_SELECTED 0x03U -#define HOST_USER_CONNECTION 0x04U -#define HOST_USER_DISCONNECTION 0x05U -#define HOST_USER_UNRECOVERED_ERROR 0x06U - - -/** - * @} - */ - - - -/** @defgroup USBH_CORE_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBH_CORE_Exported_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBH_CORE_Exported_FunctionsPrototype - * @{ - */ - - -USBH_StatusTypeDef USBH_Init(USBH_HandleTypeDef *phost, void (*pUsrFunc)(USBH_HandleTypeDef *phost, uint8_t id), uint8_t id); -USBH_StatusTypeDef USBH_DeInit(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_RegisterClass(USBH_HandleTypeDef *phost, USBH_ClassTypeDef *pclass); -USBH_StatusTypeDef USBH_SelectInterface(USBH_HandleTypeDef *phost, uint8_t interface); -uint8_t USBH_FindInterface(USBH_HandleTypeDef *phost, - uint8_t Class, - uint8_t SubClass, - uint8_t Protocol); -uint8_t USBH_GetActiveClass(USBH_HandleTypeDef *phost); - -uint8_t USBH_FindInterfaceIndex(USBH_HandleTypeDef *phost, - uint8_t interface_number, - uint8_t alt_settings); - -uint8_t USBH_IsPortEnabled(USBH_HandleTypeDef *phost); - -USBH_StatusTypeDef USBH_Start(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_Stop(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_Process(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_ReEnumerate(USBH_HandleTypeDef *phost); - -/* USBH Low Level Driver */ -USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_LL_DeInit(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_LL_Start(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_LL_Stop(USBH_HandleTypeDef *phost); - -USBH_StatusTypeDef USBH_LL_Connect(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_LL_Disconnect(USBH_HandleTypeDef *phost); -USBH_SpeedTypeDef USBH_LL_GetSpeed(USBH_HandleTypeDef *phost); -USBH_StatusTypeDef USBH_LL_ResetPort(USBH_HandleTypeDef *phost); -uint32_t USBH_LL_GetLastXferSize(USBH_HandleTypeDef *phost, - uint8_t pipe); - -USBH_StatusTypeDef USBH_LL_DriverVBUS(USBH_HandleTypeDef *phost, - uint8_t state); - -USBH_StatusTypeDef USBH_LL_OpenPipe(USBH_HandleTypeDef *phost, - uint8_t pipe, - uint8_t epnum, - uint8_t dev_address, - uint8_t speed, - uint8_t ep_type, - uint16_t mps); - -USBH_StatusTypeDef USBH_LL_ClosePipe(USBH_HandleTypeDef *phost, - uint8_t pipe); - -USBH_StatusTypeDef USBH_LL_SubmitURB(USBH_HandleTypeDef *phost, - uint8_t pipe, - uint8_t direction, - uint8_t ep_type, - uint8_t token, - uint8_t *pbuff, - uint16_t length, - uint8_t do_ping); - -USBH_URBStateTypeDef USBH_LL_GetURBState(USBH_HandleTypeDef *phost, - uint8_t pipe); - -#if (USBH_USE_OS == 1U) -USBH_StatusTypeDef USBH_LL_NotifyURBChange(USBH_HandleTypeDef *phost); -#endif - -USBH_StatusTypeDef USBH_LL_SetToggle(USBH_HandleTypeDef *phost, - uint8_t pipe, uint8_t toggle); - -uint8_t USBH_LL_GetToggle(USBH_HandleTypeDef *phost, uint8_t pipe); - -void USBH_LL_PortDisabled(USBH_HandleTypeDef *phost); -void USBH_LL_PortEnabled(USBH_HandleTypeDef *phost); - -/* USBH Time base */ -void USBH_LL_SetTimer(USBH_HandleTypeDef *phost, uint32_t time); -void USBH_LL_IncTimer(USBH_HandleTypeDef *phost); - -void USBH_Delay(uint32_t Delay); - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USBH_CORE_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - - diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_ctlreq.h b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_ctlreq.h deleted file mode 100644 index 5c4e383..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_ctlreq.h +++ /dev/null @@ -1,141 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_ctlreq.h - * @author MCD Application Team - * @brief Header file for usbh_ctlreq.c - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Define to prevent recursive ----------------------------------------------*/ -#ifndef __USBH_CTLREQ_H -#define __USBH_CTLREQ_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_core.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_CTLREQ - * @brief This file is the - * @{ - */ - - -/** @defgroup USBH_CTLREQ_Exported_Defines - * @{ - */ -/*Standard Feature Selector for clear feature command*/ -#define FEATURE_SELECTOR_ENDPOINT 0x00U -#define FEATURE_SELECTOR_DEVICE 0x01U -#define FEATURE_SELECTOR_REMOTEWAKEUP 0X01U - - -#define INTERFACE_DESC_TYPE 0x04U -#define ENDPOINT_DESC_TYPE 0x05U -#define INTERFACE_DESC_SIZE 0x09U - -/** - * @} - */ - - -/** @defgroup USBH_CTLREQ_Exported_Types - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_CTLREQ_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_CTLREQ_Exported_Variables - * @{ - */ -extern uint8_t USBH_CfgDesc[512]; -/** - * @} - */ - -/** @defgroup USBH_CTLREQ_Exported_FunctionsPrototype - * @{ - */ -USBH_StatusTypeDef USBH_CtlReq(USBH_HandleTypeDef *phost, uint8_t *buff, - uint16_t length); - -USBH_StatusTypeDef USBH_GetDescriptor(USBH_HandleTypeDef *phost, - uint8_t req_type, uint16_t value_idx, - uint8_t *buff, uint16_t length); - -USBH_StatusTypeDef USBH_Get_DevDesc(USBH_HandleTypeDef *phost, uint8_t length); - -USBH_StatusTypeDef USBH_Get_StringDesc(USBH_HandleTypeDef *phost, - uint8_t string_index, uint8_t *buff, - uint16_t length); - -USBH_StatusTypeDef USBH_SetCfg(USBH_HandleTypeDef *phost, uint16_t cfg_idx); - -USBH_StatusTypeDef USBH_Get_CfgDesc(USBH_HandleTypeDef *phost, uint16_t length); - -USBH_StatusTypeDef USBH_SetAddress(USBH_HandleTypeDef *phost, - uint8_t DeviceAddress); - -USBH_StatusTypeDef USBH_SetInterface(USBH_HandleTypeDef *phost, uint8_t ep_num, - uint8_t altSetting); - -USBH_StatusTypeDef USBH_SetFeature(USBH_HandleTypeDef *phost, uint8_t wValue); - -USBH_StatusTypeDef USBH_ClrFeature(USBH_HandleTypeDef *phost, uint8_t ep_num); - -USBH_DescHeader_t *USBH_GetNextDesc(uint8_t *pbuf, uint16_t *ptr); -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USBH_CTLREQ_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_def.h b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_def.h deleted file mode 100644 index 7c5b038..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_def.h +++ /dev/null @@ -1,512 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_def.h - * @author MCD Application Team - * @brief Definitions used in the USB host library - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Define to prevent recursive ----------------------------------------------*/ -#ifndef USBH_DEF_H -#define USBH_DEF_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_conf.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_DEF - * @brief This file is includes USB descriptors - * @{ - */ - -#ifndef NULL -#define NULL 0U -#endif - -#ifndef FALSE -#define FALSE 0U -#endif - -#ifndef TRUE -#define TRUE 1U -#endif - -#ifndef USBH_DEV_RESET_TIMEOUT -#define USBH_DEV_RESET_TIMEOUT 1000U -#endif - -#define ValBit(VAR,POS) (VAR & (1 << POS)) -#define SetBit(VAR,POS) (VAR |= (1 << POS)) -#define ClrBit(VAR,POS) (VAR &= ((1 << POS)^255)) - -#ifndef MIN -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) -#endif - -#ifndef MAX -#define MAX(a, b) (((a) > (b)) ? (a) : (b)) -#endif - -#define LE16(addr) (((uint16_t)(addr)[0]) | \ - ((uint16_t)(((uint32_t)(addr)[1]) << 8))) - -#define LE24(addr) (((uint32_t)(addr)[0]) | \ - (((uint32_t)(addr)[1]) << 8) | \ - (((uint32_t)(addr)[2]) << 16)) - -#define LE32(addr) (((uint32_t)(addr)[0]) | \ - (((uint32_t)(addr)[1]) << 8) | \ - (((uint32_t)(addr)[2]) << 16) | \ - (((uint32_t)(addr)[3]) << 24)) - -#define LE64(addr) (((uint64_t)(addr)[0]) | \ - (((uint64_t)(addr)[1]) << 8) | \ - (((uint64_t)(addr)[2]) << 16) | \ - (((uint64_t)(addr)[3]) << 24) | \ - (((uint64_t)(addr)[4]) << 32) | \ - (((uint64_t)(addr)[5]) << 40) | \ - (((uint64_t)(addr)[6]) << 48) | \ - (((uint64_t)(addr)[7]) << 56)) - -#define LE16S(addr) ((int16_t)(LE16((addr)))) -#define LE24S(addr) ((int32_t)(LE24((addr)))) -#define LE32S(addr) ((int32_t)(LE32((addr)))) -#define LE64S(addr) ((int64_t)(LE64((addr)))) - -#ifndef USBH_MAX_DATA_BUFFER -#define USBH_MAX_DATA_BUFFER 0x400U -#endif - -#define USBH_MAX_EP_PACKET_SIZE 0x400U - -#define USB_LEN_DESC_HDR 0x02U -#define USB_LEN_DEV_DESC 0x12U -#define USB_LEN_CFG_DESC 0x09U -#define USB_LEN_IF_DESC 0x09U -#define USB_LEN_EP_DESC 0x07U -#define USB_LEN_OTG_DESC 0x03U -#define USB_LEN_SETUP_PKT 0x08U - -/* bmRequestType :D7 Data Phase Transfer Direction */ -#define USB_REQ_DIR_MASK 0x80U -#define USB_H2D 0x00U -#define USB_D2H 0x80U - -/* bmRequestType D6..5 Type */ -#define USB_REQ_TYPE_STANDARD 0x00U -#define USB_REQ_TYPE_CLASS 0x20U -#define USB_REQ_TYPE_VENDOR 0x40U -#define USB_REQ_TYPE_RESERVED 0x60U - -/* bmRequestType D4..0 Recipient */ -#define USB_REQ_RECIPIENT_DEVICE 0x00U -#define USB_REQ_RECIPIENT_INTERFACE 0x01U -#define USB_REQ_RECIPIENT_ENDPOINT 0x02U -#define USB_REQ_RECIPIENT_OTHER 0x03U - -/* Table 9-4. Standard Request Codes */ -/* bRequest , Value */ -#define USB_REQ_GET_STATUS 0x00U -#define USB_REQ_CLEAR_FEATURE 0x01U -#define USB_REQ_SET_FEATURE 0x03U -#define USB_REQ_SET_ADDRESS 0x05U -#define USB_REQ_GET_DESCRIPTOR 0x06U -#define USB_REQ_SET_DESCRIPTOR 0x07U -#define USB_REQ_GET_CONFIGURATION 0x08U -#define USB_REQ_SET_CONFIGURATION 0x09U -#define USB_REQ_GET_INTERFACE 0x0AU -#define USB_REQ_SET_INTERFACE 0x0BU -#define USB_REQ_SYNCH_FRAME 0x0CU - -/* Table 9-5. Descriptor Types of USB Specifications */ -#define USB_DESC_TYPE_DEVICE 0x01U -#define USB_DESC_TYPE_CONFIGURATION 0x02U -#define USB_DESC_TYPE_STRING 0x03U -#define USB_DESC_TYPE_INTERFACE 0x04U -#define USB_DESC_TYPE_ENDPOINT 0x05U -#define USB_DESC_TYPE_DEVICE_QUALIFIER 0x06U -#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 0x07U -#define USB_DESC_TYPE_INTERFACE_POWER 0x08U -#define USB_DESC_TYPE_HID 0x21U -#define USB_DESC_TYPE_HID_REPORT 0x22U - - -#define USB_DEVICE_DESC_SIZE 0x12U -#define USB_CONFIGURATION_DESC_SIZE 0x09U -#define USB_HID_DESC_SIZE 0x09U -#define USB_INTERFACE_DESC_SIZE 0x09U -#define USB_ENDPOINT_DESC_SIZE 0x07U - -/* Descriptor Type and Descriptor Index */ -/* Use the following values when calling the function USBH_GetDescriptor */ -#define USB_DESC_DEVICE ((USB_DESC_TYPE_DEVICE << 8) & 0xFF00U) -#define USB_DESC_CONFIGURATION ((USB_DESC_TYPE_CONFIGURATION << 8) & 0xFF00U) -#define USB_DESC_STRING ((USB_DESC_TYPE_STRING << 8) & 0xFF00U) -#define USB_DESC_INTERFACE ((USB_DESC_TYPE_INTERFACE << 8) & 0xFF00U) -#define USB_DESC_ENDPOINT ((USB_DESC_TYPE_INTERFACE << 8) & 0xFF00U) -#define USB_DESC_DEVICE_QUALIFIER ((USB_DESC_TYPE_DEVICE_QUALIFIER << 8) & 0xFF00U) -#define USB_DESC_OTHER_SPEED_CONFIGURATION ((USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION << 8) & 0xFF00U) -#define USB_DESC_INTERFACE_POWER ((USB_DESC_TYPE_INTERFACE_POWER << 8) & 0xFF00U) -#define USB_DESC_HID_REPORT ((USB_DESC_TYPE_HID_REPORT << 8) & 0xFF00U) -#define USB_DESC_HID ((USB_DESC_TYPE_HID << 8) & 0xFF00U) - - -#define USB_EP_TYPE_CTRL 0x00U -#define USB_EP_TYPE_ISOC 0x01U -#define USB_EP_TYPE_BULK 0x02U -#define USB_EP_TYPE_INTR 0x03U - -#define USB_EP_DIR_OUT 0x00U -#define USB_EP_DIR_IN 0x80U -#define USB_EP_DIR_MSK 0x80U - -#ifndef USBH_MAX_PIPES_NBR -#define USBH_MAX_PIPES_NBR 16U -#endif /* USBH_MAX_PIPES_NBR */ - -#define USBH_DEVICE_ADDRESS_DEFAULT 0x00U -#define USBH_DEVICE_ADDRESS 0x01U - -#define USBH_MAX_ERROR_COUNT 0x02U - -#if (USBH_USE_OS == 1U) -#define MSGQUEUE_OBJECTS 0x10U -#endif - - -/** - * @} - */ - - -#define USBH_CONFIGURATION_DESCRIPTOR_SIZE (USB_CONFIGURATION_DESC_SIZE \ - + USB_INTERFACE_DESC_SIZE\ - + (USBH_MAX_NUM_ENDPOINTS * USB_ENDPOINT_DESC_SIZE)) - - -#define CONFIG_DESC_wTOTAL_LENGTH (ConfigurationDescriptorData.ConfigDescfield.\ - ConfigurationDescriptor.wTotalLength) - - -typedef union -{ - uint16_t w; - struct BW - { - uint8_t msb; - uint8_t lsb; - } - bw; -} -uint16_t_uint8_t; - - -typedef union _USB_Setup -{ - uint32_t d8[2]; - - struct _SetupPkt_Struc - { - uint8_t bmRequestType; - uint8_t bRequest; - uint16_t_uint8_t wValue; - uint16_t_uint8_t wIndex; - uint16_t_uint8_t wLength; - } b; -} -USB_Setup_TypeDef; - -typedef struct _DescHeader -{ - uint8_t bLength; - uint8_t bDescriptorType; -} -USBH_DescHeader_t; - -typedef struct _DeviceDescriptor -{ - uint8_t bLength; - uint8_t bDescriptorType; - uint16_t bcdUSB; /* USB Specification Number which device complies too */ - uint8_t bDeviceClass; - uint8_t bDeviceSubClass; - uint8_t bDeviceProtocol; - /* If equal to Zero, each interface specifies its own class - code if equal to 0xFF, the class code is vendor specified. - Otherwise field is valid Class Code.*/ - uint8_t bMaxPacketSize; - uint16_t idVendor; /* Vendor ID (Assigned by USB Org) */ - uint16_t idProduct; /* Product ID (Assigned by Manufacturer) */ - uint16_t bcdDevice; /* Device Release Number */ - uint8_t iManufacturer; /* Index of Manufacturer String Descriptor */ - uint8_t iProduct; /* Index of Product String Descriptor */ - uint8_t iSerialNumber; /* Index of Serial Number String Descriptor */ - uint8_t bNumConfigurations; /* Number of Possible Configurations */ -} -USBH_DevDescTypeDef; - -typedef struct _EndpointDescriptor -{ - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bEndpointAddress; /* indicates what endpoint this descriptor is describing */ - uint8_t bmAttributes; /* specifies the transfer type. */ - uint16_t wMaxPacketSize; /* Maximum Packet Size this endpoint is capable of sending or receiving */ - uint8_t bInterval; /* is used to specify the polling interval of certain transfers. */ -} -USBH_EpDescTypeDef; - -typedef struct _InterfaceDescriptor -{ - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bInterfaceNumber; - uint8_t bAlternateSetting; /* Value used to select alternative setting */ - uint8_t bNumEndpoints; /* Number of Endpoints used for this interface */ - uint8_t bInterfaceClass; /* Class Code (Assigned by USB Org) */ - uint8_t bInterfaceSubClass; /* Subclass Code (Assigned by USB Org) */ - uint8_t bInterfaceProtocol; /* Protocol Code */ - uint8_t iInterface; /* Index of String Descriptor Describing this interface */ - USBH_EpDescTypeDef Ep_Desc[USBH_MAX_NUM_ENDPOINTS]; -} -USBH_InterfaceDescTypeDef; - - -typedef struct _ConfigurationDescriptor -{ - uint8_t bLength; - uint8_t bDescriptorType; - uint16_t wTotalLength; /* Total Length of Data Returned */ - uint8_t bNumInterfaces; /* Number of Interfaces */ - uint8_t bConfigurationValue; /* Value to use as an argument to select this configuration*/ - uint8_t iConfiguration; /*Index of String Descriptor Describing this configuration */ - uint8_t bmAttributes; /* D7 Bus Powered , D6 Self Powered, D5 Remote Wakeup , D4..0 Reserved (0)*/ - uint8_t bMaxPower; /*Maximum Power Consumption */ - USBH_InterfaceDescTypeDef Itf_Desc[USBH_MAX_NUM_INTERFACES]; -} -USBH_CfgDescTypeDef; - - -/* Following USB Host status */ -typedef enum -{ - USBH_OK = 0, - USBH_BUSY, - USBH_FAIL, - USBH_NOT_SUPPORTED, - USBH_UNRECOVERED_ERROR, - USBH_ERROR_SPEED_UNKNOWN, -} USBH_StatusTypeDef; - - -/** @defgroup USBH_CORE_Exported_Types - * @{ - */ - -typedef enum -{ - USBH_SPEED_HIGH = 0U, - USBH_SPEED_FULL = 1U, - USBH_SPEED_LOW = 2U, - -} USBH_SpeedTypeDef; - -/* Following states are used for gState */ -typedef enum -{ - HOST_IDLE = 0U, - HOST_DEV_WAIT_FOR_ATTACHMENT, - HOST_DEV_ATTACHED, - HOST_DEV_DISCONNECTED, - HOST_DETECT_DEVICE_SPEED, - HOST_ENUMERATION, - HOST_CLASS_REQUEST, - HOST_INPUT, - HOST_SET_CONFIGURATION, - HOST_SET_WAKEUP_FEATURE, - HOST_CHECK_CLASS, - HOST_CLASS, - HOST_SUSPENDED, - HOST_ABORT_STATE, -} HOST_StateTypeDef; - -/* Following states are used for EnumerationState */ -typedef enum -{ - ENUM_IDLE = 0U, - ENUM_GET_FULL_DEV_DESC, - ENUM_SET_ADDR, - ENUM_GET_CFG_DESC, - ENUM_GET_FULL_CFG_DESC, - ENUM_GET_MFC_STRING_DESC, - ENUM_GET_PRODUCT_STRING_DESC, - ENUM_GET_SERIALNUM_STRING_DESC, -} ENUM_StateTypeDef; - -/* Following states are used for CtrlXferStateMachine */ -typedef enum -{ - CTRL_IDLE = 0U, - CTRL_SETUP, - CTRL_SETUP_WAIT, - CTRL_DATA_IN, - CTRL_DATA_IN_WAIT, - CTRL_DATA_OUT, - CTRL_DATA_OUT_WAIT, - CTRL_STATUS_IN, - CTRL_STATUS_IN_WAIT, - CTRL_STATUS_OUT, - CTRL_STATUS_OUT_WAIT, - CTRL_ERROR, - CTRL_STALLED, - CTRL_COMPLETE -} CTRL_StateTypeDef; - - -/* Following states are used for RequestState */ -typedef enum -{ - CMD_IDLE = 0U, - CMD_SEND, - CMD_WAIT -} CMD_StateTypeDef; - -typedef enum -{ - USBH_URB_IDLE = 0U, - USBH_URB_DONE, - USBH_URB_NOTREADY, - USBH_URB_NYET, - USBH_URB_ERROR, - USBH_URB_STALL -} USBH_URBStateTypeDef; - -typedef enum -{ - USBH_PORT_EVENT = 1U, - USBH_URB_EVENT, - USBH_CONTROL_EVENT, - USBH_CLASS_EVENT, - USBH_STATE_CHANGED_EVENT, -} -USBH_OSEventTypeDef; - -/* Control request structure */ -typedef struct -{ - uint8_t pipe_in; - uint8_t pipe_out; - uint8_t pipe_size; - uint8_t *buff; - uint16_t length; - uint16_t timer; - USB_Setup_TypeDef setup; - CTRL_StateTypeDef state; - uint8_t errorcount; - -} USBH_CtrlTypeDef; - -/* Attached device structure */ -typedef struct -{ - uint8_t CfgDesc_Raw[USBH_MAX_SIZE_CONFIGURATION]; - uint8_t Data[USBH_MAX_DATA_BUFFER]; - uint8_t address; - uint8_t speed; - uint8_t EnumCnt; - uint8_t RstCnt; - __IO uint8_t is_connected; - __IO uint8_t is_disconnected; - __IO uint8_t is_ReEnumerated; - uint8_t PortEnabled; - uint8_t current_interface; - USBH_DevDescTypeDef DevDesc; - USBH_CfgDescTypeDef CfgDesc; -} USBH_DeviceTypeDef; - -struct _USBH_HandleTypeDef; - -/* USB Host Class structure */ -typedef struct -{ - const char *Name; - uint8_t ClassCode; - USBH_StatusTypeDef(*Init)(struct _USBH_HandleTypeDef *phost); - USBH_StatusTypeDef(*DeInit)(struct _USBH_HandleTypeDef *phost); - USBH_StatusTypeDef(*Requests)(struct _USBH_HandleTypeDef *phost); - USBH_StatusTypeDef(*BgndProcess)(struct _USBH_HandleTypeDef *phost); - USBH_StatusTypeDef(*SOFProcess)(struct _USBH_HandleTypeDef *phost); - void *pData; -} USBH_ClassTypeDef; - -/* USB Host handle structure */ -typedef struct _USBH_HandleTypeDef -{ - __IO HOST_StateTypeDef gState; /* Host State Machine Value */ - ENUM_StateTypeDef EnumState; /* Enumeration state Machine */ - CMD_StateTypeDef RequestState; - USBH_CtrlTypeDef Control; - USBH_DeviceTypeDef device; - USBH_ClassTypeDef *pClass[USBH_MAX_NUM_SUPPORTED_CLASS]; - USBH_ClassTypeDef *pActiveClass; - uint32_t ClassNumber; - uint32_t Pipes[16]; - __IO uint32_t Timer; - uint32_t Timeout; - uint8_t id; - void *pData; - void (* pUser)(struct _USBH_HandleTypeDef *pHandle, uint8_t id); - -#if (USBH_USE_OS == 1U) -#if osCMSIS < 0x20000 - osMessageQId os_event; - osThreadId thread; -#else - osMessageQueueId_t os_event; - osThreadId_t thread; -#endif - uint32_t os_msg; -#endif - -} USBH_HandleTypeDef; - - -#if defined ( __GNUC__ ) -#ifndef __weak -#define __weak __attribute__((weak)) -#endif /* __weak */ -#ifndef __packed -#define __packed __attribute__((__packed__)) -#endif /* __packed */ -#endif /* __GNUC__ */ - -#ifdef __cplusplus -} -#endif - -#endif /* USBH_DEF_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_ioreq.h b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_ioreq.h deleted file mode 100644 index b4896c7..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_ioreq.h +++ /dev/null @@ -1,160 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_ioreq.h - * @author MCD Application Team - * @brief Header file for usbh_ioreq.c - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Define to prevent recursive ----------------------------------------------*/ -#ifndef __USBH_IOREQ_H -#define __USBH_IOREQ_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_conf.h" -#include "usbh_core.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_IOREQ - * @brief This file is the header file for usbh_ioreq.c - * @{ - */ - - -/** @defgroup USBH_IOREQ_Exported_Defines - * @{ - */ - -#define USBH_PID_SETUP 0U -#define USBH_PID_DATA 1U - -#define USBH_EP_CONTROL 0U -#define USBH_EP_ISO 1U -#define USBH_EP_BULK 2U -#define USBH_EP_INTERRUPT 3U - -#define USBH_SETUP_PKT_SIZE 8U -/** - * @} - */ - - -/** @defgroup USBH_IOREQ_Exported_Types - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_IOREQ_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_IOREQ_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_IOREQ_Exported_FunctionsPrototype - * @{ - */ -USBH_StatusTypeDef USBH_CtlSendSetup(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint8_t pipe_num); - -USBH_StatusTypeDef USBH_CtlSendData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint16_t length, - uint8_t pipe_num, - uint8_t do_ping); - -USBH_StatusTypeDef USBH_CtlReceiveData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint16_t length, - uint8_t pipe_num); - -USBH_StatusTypeDef USBH_BulkReceiveData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint16_t length, - uint8_t pipe_num); - -USBH_StatusTypeDef USBH_BulkSendData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint16_t length, - uint8_t pipe_num, - uint8_t do_ping); - -USBH_StatusTypeDef USBH_InterruptReceiveData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint8_t length, - uint8_t pipe_num); - -USBH_StatusTypeDef USBH_InterruptSendData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint8_t length, - uint8_t pipe_num); - - -USBH_StatusTypeDef USBH_IsocReceiveData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint32_t length, - uint8_t pipe_num); - - -USBH_StatusTypeDef USBH_IsocSendData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint32_t length, - uint8_t pipe_num); -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USBH_IOREQ_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_pipes.h b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_pipes.h deleted file mode 100644 index 5d256f7..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Inc/usbh_pipes.h +++ /dev/null @@ -1,123 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_pipes.h - * @author MCD Application Team - * @brief Header file for usbh_pipes.c - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Define to prevent recursive ----------------------------------------------*/ -#ifndef __USBH_PIPES_H -#define __USBH_PIPES_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_core.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_PIPES - * @brief This file is the header file for usbh_pipes.c - * @{ - */ - -/** @defgroup USBH_PIPES_Exported_Defines - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_PIPES_Exported_Types - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_PIPES_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_PIPES_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_PIPES_Exported_FunctionsPrototype - * @{ - */ - -USBH_StatusTypeDef USBH_OpenPipe(USBH_HandleTypeDef *phost, - uint8_t pipe_num, - uint8_t epnum, - uint8_t dev_address, - uint8_t speed, - uint8_t ep_type, - uint16_t mps); - -USBH_StatusTypeDef USBH_ClosePipe(USBH_HandleTypeDef *phost, - uint8_t pipe_num); - -uint8_t USBH_AllocPipe(USBH_HandleTypeDef *phost, - uint8_t ep_addr); - -USBH_StatusTypeDef USBH_FreePipe(USBH_HandleTypeDef *phost, - uint8_t idx); - - - - -/** - * @} - */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __USBH_PIPES_H */ - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_core.c b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_core.c deleted file mode 100644 index 59fb5fd..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_core.c +++ /dev/null @@ -1,1397 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_core.c - * @author MCD Application Team - * @brief This file implements the functions for the core state machine process - * the enumeration and the control transfer process - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_core.h" - - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_CORE - * @brief This file handles the basic enumeration when a device is connected - * to the host. - * @{ - */ - - -/** @defgroup USBH_CORE_Private_Defines - * @{ - */ -#define USBH_ADDRESS_DEFAULT 0x00U -#define USBH_ADDRESS_ASSIGNED 0x01U -#define USBH_MPS_DEFAULT 0x40U -/** - * @} - */ - -/** @defgroup USBH_CORE_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_CORE_Private_Variables - * @{ - */ -#if (USBH_USE_OS == 1U) -#if (osCMSIS >= 0x20000U) -osThreadAttr_t USBH_Thread_Atrr; -#endif -#endif - - -/** - * @} - */ - - -/** @defgroup USBH_CORE_Private_Functions - * @{ - */ -static USBH_StatusTypeDef USBH_HandleEnum(USBH_HandleTypeDef *phost); -static void USBH_HandleSof(USBH_HandleTypeDef *phost); -static USBH_StatusTypeDef DeInitStateMachine(USBH_HandleTypeDef *phost); - -#if (USBH_USE_OS == 1U) -#if (osCMSIS < 0x20000U) -static void USBH_Process_OS(void const *argument); -#else -static void USBH_Process_OS(void *argument); -#endif -#endif - - -/** - * @brief HCD_Init - * Initialize the HOST Core. - * @param phost: Host Handle - * @param pUsrFunc: User Callback - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_Init(USBH_HandleTypeDef *phost, - void (*pUsrFunc)(USBH_HandleTypeDef *phost, - uint8_t id), uint8_t id) -{ - /* Check whether the USB Host handle is valid */ - if (phost == NULL) - { - USBH_ErrLog("Invalid Host handle"); - return USBH_FAIL; - } - - /* Set DRiver ID */ - phost->id = id; - - /* Unlink class*/ - phost->pActiveClass = NULL; - phost->ClassNumber = 0U; - - /* Restore default states and prepare EP0 */ - (void)DeInitStateMachine(phost); - - /* Restore default Device connection states */ - phost->device.PortEnabled = 0U; - phost->device.is_connected = 0U; - phost->device.is_disconnected = 0U; - phost->device.is_ReEnumerated = 0U; - - /* Assign User process */ - if (pUsrFunc != NULL) - { - phost->pUser = pUsrFunc; - } - -#if (USBH_USE_OS == 1U) -#if (osCMSIS < 0x20000U) - - /* Create USB Host Queue */ - osMessageQDef(USBH_Queue, MSGQUEUE_OBJECTS, uint16_t); - phost->os_event = osMessageCreate(osMessageQ(USBH_Queue), NULL); - - /* Create USB Host Task */ -#if defined (USBH_PROCESS_STACK_SIZE) - osThreadDef(USBH_Thread, USBH_Process_OS, USBH_PROCESS_PRIO, 0U, USBH_PROCESS_STACK_SIZE); -#else - osThreadDef(USBH_Thread, USBH_Process_OS, USBH_PROCESS_PRIO, 0U, 8U * configMINIMAL_STACK_SIZE); -#endif /* defined (USBH_PROCESS_STACK_SIZE) */ - - phost->thread = osThreadCreate(osThread(USBH_Thread), phost); - -#else - - /* Create USB Host Queue */ - phost->os_event = osMessageQueueNew(MSGQUEUE_OBJECTS, sizeof(uint32_t), NULL); - - /* Create USB Host Task */ - USBH_Thread_Atrr.name = "USBH_Queue"; - -#if defined (USBH_PROCESS_STACK_SIZE) - USBH_Thread_Atrr.stack_size = USBH_PROCESS_STACK_SIZE; -#else - USBH_Thread_Atrr.stack_size = (8U * configMINIMAL_STACK_SIZE); -#endif /* defined (USBH_PROCESS_STACK_SIZE) */ - - USBH_Thread_Atrr.priority = USBH_PROCESS_PRIO; - phost->thread = osThreadNew(USBH_Process_OS, phost, &USBH_Thread_Atrr); - -#endif /* (osCMSIS < 0x20000U) */ -#endif /* (USBH_USE_OS == 1U) */ - - /* Initialize low level driver */ - (void)USBH_LL_Init(phost); - - return USBH_OK; -} - - -/** - * @brief HCD_Init - * De-Initialize the Host portion of the driver. - * @param phost: Host Handle - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_DeInit(USBH_HandleTypeDef *phost) -{ - (void)DeInitStateMachine(phost); - - /* Restore default Device connection states */ - phost->device.PortEnabled = 0U; - phost->device.is_connected = 0U; - phost->device.is_disconnected = 0U; - phost->device.is_ReEnumerated = 0U; - phost->device.RstCnt = 0U; - phost->device.EnumCnt = 0U; - - if (phost->pData != NULL) - { - (void)USBH_LL_Stop(phost); - } - -#if (USBH_USE_OS == 1U) -#if (osCMSIS < 0x20000U) - - /* Free allocated resource for USBH process */ - (void)osThreadTerminate(phost->thread); - (void)osMessageDelete(phost->os_event); - -#else - - /* Free allocated resource for USBH process */ - (void)osThreadTerminate(phost->thread); - (void)osMessageQueueDelete(phost->os_event); - -#endif /* (osCMSIS < 0x20000U) */ -#endif /* (USBH_USE_OS == 1U) */ - - return USBH_OK; -} - - -/** - * @brief DeInitStateMachine - * De-Initialize the Host state machine. - * @param phost: Host Handle - * @retval USBH Status - */ -static USBH_StatusTypeDef DeInitStateMachine(USBH_HandleTypeDef *phost) -{ - uint32_t i = 0U; - - /* Clear Pipes flags*/ - for (i = 0U; i < USBH_MAX_PIPES_NBR; i++) - { - phost->Pipes[i] = 0U; - } - - for (i = 0U; i < USBH_MAX_DATA_BUFFER; i++) - { - phost->device.Data[i] = 0U; - } - - phost->gState = HOST_IDLE; - phost->EnumState = ENUM_IDLE; - phost->RequestState = CMD_SEND; - phost->Timer = 0U; - - phost->Control.state = CTRL_SETUP; - phost->Control.pipe_size = USBH_MPS_DEFAULT; - phost->Control.errorcount = 0U; - - phost->device.address = USBH_ADDRESS_DEFAULT; - phost->device.speed = (uint8_t)USBH_SPEED_FULL; - phost->device.RstCnt = 0U; - phost->device.EnumCnt = 0U; - - return USBH_OK; -} - - -/** - * @brief USBH_RegisterClass - * Link class driver to Host Core. - * @param phost : Host Handle - * @param pclass: Class handle - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_RegisterClass(USBH_HandleTypeDef *phost, USBH_ClassTypeDef *pclass) -{ - USBH_StatusTypeDef status = USBH_OK; - - if (pclass != NULL) - { - if (phost->ClassNumber < USBH_MAX_NUM_SUPPORTED_CLASS) - { - /* link the class to the USB Host handle */ - phost->pClass[phost->ClassNumber++] = pclass; - status = USBH_OK; - } - else - { - USBH_ErrLog("Max Class Number reached"); - status = USBH_FAIL; - } - } - else - { - USBH_ErrLog("Invalid Class handle"); - status = USBH_FAIL; - } - - return status; -} - - -/** - * @brief USBH_SelectInterface - * Select current interface. - * @param phost: Host Handle - * @param interface: Interface number - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_SelectInterface(USBH_HandleTypeDef *phost, uint8_t interface) -{ - USBH_StatusTypeDef status = USBH_OK; - - if (interface < phost->device.CfgDesc.bNumInterfaces) - { - phost->device.current_interface = interface; - USBH_UsrLog("Switching to Interface (#%d)", interface); - USBH_UsrLog("Class : %xh", phost->device.CfgDesc.Itf_Desc[interface].bInterfaceClass); - USBH_UsrLog("SubClass : %xh", phost->device.CfgDesc.Itf_Desc[interface].bInterfaceSubClass); - USBH_UsrLog("Protocol : %xh", phost->device.CfgDesc.Itf_Desc[interface].bInterfaceProtocol); - } - else - { - USBH_ErrLog("Cannot Select This Interface."); - status = USBH_FAIL; - } - - return status; -} - - -/** - * @brief USBH_GetActiveClass - * Return Device Class. - * @param phost: Host Handle - * @param interface: Interface index - * @retval Class Code - */ -uint8_t USBH_GetActiveClass(USBH_HandleTypeDef *phost) -{ - return (phost->device.CfgDesc.Itf_Desc[0].bInterfaceClass); -} - - -/** - * @brief USBH_FindInterface - * Find the interface index for a specific class. - * @param phost: Host Handle - * @param Class: Class code - * @param SubClass: SubClass code - * @param Protocol: Protocol code - * @retval interface index in the configuration structure - * @note : (1)interface index 0xFF means interface index not found - */ -uint8_t USBH_FindInterface(USBH_HandleTypeDef *phost, uint8_t Class, uint8_t SubClass, uint8_t Protocol) -{ - USBH_InterfaceDescTypeDef *pif; - USBH_CfgDescTypeDef *pcfg; - uint8_t if_ix = 0U; - - pif = (USBH_InterfaceDescTypeDef *)NULL; - pcfg = &phost->device.CfgDesc; - - while (if_ix < USBH_MAX_NUM_INTERFACES) - { - pif = &pcfg->Itf_Desc[if_ix]; - if (((pif->bInterfaceClass == Class) || (Class == 0xFFU)) && - ((pif->bInterfaceSubClass == SubClass) || (SubClass == 0xFFU)) && - ((pif->bInterfaceProtocol == Protocol) || (Protocol == 0xFFU))) - { - return if_ix; - } - if_ix++; - } - return 0xFFU; -} - - -/** - * @brief USBH_FindInterfaceIndex - * Find the interface index for a specific class interface and alternate setting number. - * @param phost: Host Handle - * @param interface_number: interface number - * @param alt_settings : alternate setting number - * @retval interface index in the configuration structure - * @note : (1)interface index 0xFF means interface index not found - */ -uint8_t USBH_FindInterfaceIndex(USBH_HandleTypeDef *phost, uint8_t interface_number, uint8_t alt_settings) -{ - USBH_InterfaceDescTypeDef *pif; - USBH_CfgDescTypeDef *pcfg; - uint8_t if_ix = 0U; - - pif = (USBH_InterfaceDescTypeDef *)NULL; - pcfg = &phost->device.CfgDesc; - - while (if_ix < USBH_MAX_NUM_INTERFACES) - { - pif = &pcfg->Itf_Desc[if_ix]; - if ((pif->bInterfaceNumber == interface_number) && (pif->bAlternateSetting == alt_settings)) - { - return if_ix; - } - if_ix++; - } - return 0xFFU; -} - - -/** - * @brief USBH_Start - * Start the USB Host Core. - * @param phost: Host Handle - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_Start(USBH_HandleTypeDef *phost) -{ - /* Start the low level driver */ - (void)USBH_LL_Start(phost); - - /* Activate VBUS on the port */ - (void)USBH_LL_DriverVBUS(phost, TRUE); - - return USBH_OK; -} - - -/** - * @brief USBH_Stop - * Stop the USB Host Core. - * @param phost: Host Handle - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_Stop(USBH_HandleTypeDef *phost) -{ - /* DeActivate VBUS on the port */ - (void)USBH_LL_DriverVBUS(phost, FALSE); - - /* Stop and cleanup the low level driver */ - (void)USBH_LL_Stop(phost); - - /* Free Control Pipes */ - (void)USBH_FreePipe(phost, phost->Control.pipe_in); - (void)USBH_FreePipe(phost, phost->Control.pipe_out); - - return USBH_OK; -} - - -/** - * @brief HCD_ReEnumerate - * Perform a new Enumeration phase. - * @param phost: Host Handle - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_ReEnumerate(USBH_HandleTypeDef *phost) -{ - if (USBH_IsPortEnabled(phost) != 0U) - { - phost->device.is_ReEnumerated = 1U; - - /* Stop Host */ - (void)USBH_Stop(phost); - - phost->device.is_disconnected = 1U; - } - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - - return USBH_OK; -} - - -/** - * @brief USBH_Process - * Background process of the USB Core. - * @param phost: Host Handle - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_Process(USBH_HandleTypeDef *phost) -{ - __IO USBH_StatusTypeDef status = USBH_FAIL; - uint8_t idx = 0U; - - /* check for Host pending port disconnect event */ - if (phost->device.is_disconnected == 1U) - { - phost->gState = HOST_DEV_DISCONNECTED; - } - - switch (phost->gState) - { - case HOST_IDLE : - - if ((phost->device.is_connected) != 0U) - { - USBH_UsrLog("USB Device Connected"); - - /* Wait for 200 ms after connection */ - phost->gState = HOST_DEV_WAIT_FOR_ATTACHMENT; - USBH_Delay(200U); - (void)USBH_LL_ResetPort(phost); - - /* Make sure to start with Default address */ - phost->device.address = USBH_ADDRESS_DEFAULT; - phost->Timeout = 0U; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - break; - - case HOST_DEV_WAIT_FOR_ATTACHMENT: /* Wait for Port Enabled */ - - if (phost->device.PortEnabled == 1U) - { - USBH_UsrLog("USB Device Reset Completed"); - phost->device.RstCnt = 0U; - phost->gState = HOST_DEV_ATTACHED; - } - else - { - if (phost->Timeout > USBH_DEV_RESET_TIMEOUT) - { - phost->device.RstCnt++; - if (phost->device.RstCnt > 3U) - { - /* Buggy Device can't complete reset */ - USBH_UsrLog("USB Reset Failed, Please unplug the Device."); - phost->gState = HOST_ABORT_STATE; - } - else - { - phost->gState = HOST_IDLE; - } - } - else - { - phost->Timeout += 10U; - USBH_Delay(10U); - } - } -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - case HOST_DEV_ATTACHED : - - if (phost->pUser != NULL) - { - phost->pUser(phost, HOST_USER_CONNECTION); - } - - /* Wait for 100 ms after Reset */ - USBH_Delay(100U); - - phost->device.speed = (uint8_t)USBH_LL_GetSpeed(phost); - - phost->gState = HOST_ENUMERATION; - - phost->Control.pipe_out = USBH_AllocPipe(phost, 0x00U); - phost->Control.pipe_in = USBH_AllocPipe(phost, 0x80U); - - /* Open Control pipes */ - (void)USBH_OpenPipe(phost, phost->Control.pipe_in, 0x80U, - phost->device.address, phost->device.speed, - USBH_EP_CONTROL, (uint16_t)phost->Control.pipe_size); - - /* Open Control pipes */ - (void)USBH_OpenPipe(phost, phost->Control.pipe_out, 0x00U, - phost->device.address, phost->device.speed, - USBH_EP_CONTROL, (uint16_t)phost->Control.pipe_size); - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - case HOST_ENUMERATION: - /* Check for enumeration status */ - status = USBH_HandleEnum(phost); - if (status == USBH_OK) - { - /* The function shall return USBH_OK when full enumeration is complete */ - USBH_UsrLog("Enumeration done."); - - phost->device.current_interface = 0U; - - if (phost->device.DevDesc.bNumConfigurations == 1U) - { - USBH_UsrLog("This device has only 1 configuration."); - phost->gState = HOST_SET_CONFIGURATION; - } - else - { - phost->gState = HOST_INPUT; - } -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - break; - - case HOST_INPUT: - { - /* user callback for end of device basic enumeration */ - if (phost->pUser != NULL) - { - phost->pUser(phost, HOST_USER_SELECT_CONFIGURATION); - phost->gState = HOST_SET_CONFIGURATION; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - } - break; - - case HOST_SET_CONFIGURATION: - /* set configuration */ - if (USBH_SetCfg(phost, (uint16_t)phost->device.CfgDesc.bConfigurationValue) == USBH_OK) - { - phost->gState = HOST_SET_WAKEUP_FEATURE; - USBH_UsrLog("Default configuration set."); - } - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - case HOST_SET_WAKEUP_FEATURE: - - if (((phost->device.CfgDesc.bmAttributes) & (1U << 5)) != 0U) - { - status = USBH_SetFeature(phost, FEATURE_SELECTOR_REMOTEWAKEUP); - - if (status == USBH_OK) - { - USBH_UsrLog("Device remote wakeup enabled"); - phost->gState = HOST_CHECK_CLASS; - } - else if (status == USBH_NOT_SUPPORTED) - { - USBH_UsrLog("Remote wakeup not supported by the device"); - phost->gState = HOST_CHECK_CLASS; - } - else - { - /* .. */ - } - } - else - { - phost->gState = HOST_CHECK_CLASS; - } - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - case HOST_CHECK_CLASS: - - if (phost->ClassNumber == 0U) - { - USBH_UsrLog("No Class has been registered."); - } - else - { - phost->pActiveClass = NULL; - - for (idx = 0U; idx < USBH_MAX_NUM_SUPPORTED_CLASS; idx++) - { - if (phost->pClass[idx]->ClassCode == phost->device.CfgDesc.Itf_Desc[0].bInterfaceClass) - { - phost->pActiveClass = phost->pClass[idx]; - break; - } - } - - if (phost->pActiveClass != NULL) - { - if (phost->pActiveClass->Init(phost) == USBH_OK) - { - phost->gState = HOST_CLASS_REQUEST; - USBH_UsrLog("%s class started.", phost->pActiveClass->Name); - - /* Inform user that a class has been activated */ - phost->pUser(phost, HOST_USER_CLASS_SELECTED); - } - else - { - phost->gState = HOST_ABORT_STATE; - USBH_UsrLog("Device not supporting %s class.", phost->pActiveClass->Name); - } - } - else - { - phost->gState = HOST_ABORT_STATE; - USBH_UsrLog("No registered class for this device."); - } - } - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - case HOST_CLASS_REQUEST: - /* process class standard control requests state machine */ - if (phost->pActiveClass != NULL) - { - status = phost->pActiveClass->Requests(phost); - - if (status == USBH_OK) - { - phost->gState = HOST_CLASS; - } - else if (status == USBH_FAIL) - { - phost->gState = HOST_ABORT_STATE; - USBH_ErrLog("Device not responding Please Unplug."); - } - else - { - /* .. */ - } - } - else - { - phost->gState = HOST_ABORT_STATE; - USBH_ErrLog("Invalid Class Driver."); - } -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - case HOST_CLASS: - /* process class state machine */ - if (phost->pActiveClass != NULL) - { - phost->pActiveClass->BgndProcess(phost); - } - break; - - case HOST_DEV_DISCONNECTED : - phost->device.is_disconnected = 0U; - - (void)DeInitStateMachine(phost); - - /* Re-Initilaize Host for new Enumeration */ - if (phost->pActiveClass != NULL) - { - phost->pActiveClass->DeInit(phost); - phost->pActiveClass = NULL; - } - - if (phost->pUser != NULL) - { - phost->pUser(phost, HOST_USER_DISCONNECTION); - } - USBH_UsrLog("USB Device disconnected"); - - if (phost->device.is_ReEnumerated == 1U) - { - phost->device.is_ReEnumerated = 0U; - - /* Start the host and re-enable Vbus */ - (void)USBH_Start(phost); - } - else - { - /* Device Disconnection Completed, start USB Driver */ - (void)USBH_LL_Start(phost); - } - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - case HOST_ABORT_STATE: - default : - break; - } - return USBH_OK; -} - - -/** - * @brief USBH_HandleEnum - * This function includes the complete enumeration process - * @param phost: Host Handle - * @retval USBH_Status - */ -static USBH_StatusTypeDef USBH_HandleEnum(USBH_HandleTypeDef *phost) -{ - USBH_StatusTypeDef Status = USBH_BUSY; - USBH_StatusTypeDef ReqStatus = USBH_BUSY; - - switch (phost->EnumState) - { - case ENUM_IDLE: - /* Get Device Desc for only 1st 8 bytes : To get EP0 MaxPacketSize */ - ReqStatus = USBH_Get_DevDesc(phost, 8U); - if (ReqStatus == USBH_OK) - { - phost->Control.pipe_size = phost->device.DevDesc.bMaxPacketSize; - - phost->EnumState = ENUM_GET_FULL_DEV_DESC; - - /* modify control channels configuration for MaxPacket size */ - (void)USBH_OpenPipe(phost, phost->Control.pipe_in, 0x80U, phost->device.address, - phost->device.speed, USBH_EP_CONTROL, - (uint16_t)phost->Control.pipe_size); - - /* Open Control pipes */ - (void)USBH_OpenPipe(phost, phost->Control.pipe_out, 0x00U, phost->device.address, - phost->device.speed, USBH_EP_CONTROL, - (uint16_t)phost->Control.pipe_size); - } - else if (ReqStatus == USBH_NOT_SUPPORTED) - { - USBH_ErrLog("Control error: Get Device Descriptor request failed"); - phost->device.EnumCnt++; - if (phost->device.EnumCnt > 3U) - { - /* Buggy Device can't complete get device desc request */ - USBH_UsrLog("Control error, Device not Responding Please unplug the Device."); - phost->gState = HOST_ABORT_STATE; - } - else - { - /* free control pipes */ - (void)USBH_FreePipe(phost, phost->Control.pipe_out); - (void)USBH_FreePipe(phost, phost->Control.pipe_in); - - /* Reset the USB Device */ - phost->gState = HOST_IDLE; - } - } - else - { - /* .. */ - } - break; - - case ENUM_GET_FULL_DEV_DESC: - /* Get FULL Device Desc */ - ReqStatus = USBH_Get_DevDesc(phost, USB_DEVICE_DESC_SIZE); - if (ReqStatus == USBH_OK) - { - USBH_UsrLog("PID: %xh", phost->device.DevDesc.idProduct); - USBH_UsrLog("VID: %xh", phost->device.DevDesc.idVendor); - - phost->EnumState = ENUM_SET_ADDR; - } - else if (ReqStatus == USBH_NOT_SUPPORTED) - { - USBH_ErrLog("Control error: Get Full Device Descriptor request failed"); - phost->device.EnumCnt++; - if (phost->device.EnumCnt > 3U) - { - /* Buggy Device can't complete get device desc request */ - USBH_UsrLog("Control error, Device not Responding Please unplug the Device."); - phost->gState = HOST_ABORT_STATE; - } - else - { - /* Free control pipes */ - (void)USBH_FreePipe(phost, phost->Control.pipe_out); - (void)USBH_FreePipe(phost, phost->Control.pipe_in); - - /* Reset the USB Device */ - phost->EnumState = ENUM_IDLE; - phost->gState = HOST_IDLE; - } - } - else - { - /* .. */ - } - break; - - case ENUM_SET_ADDR: - /* set address */ - ReqStatus = USBH_SetAddress(phost, USBH_DEVICE_ADDRESS); - if (ReqStatus == USBH_OK) - { - USBH_Delay(2U); - phost->device.address = USBH_DEVICE_ADDRESS; - - /* user callback for device address assigned */ - USBH_UsrLog("Address (#%d) assigned.", phost->device.address); - phost->EnumState = ENUM_GET_CFG_DESC; - - /* modify control channels to update device address */ - (void)USBH_OpenPipe(phost, phost->Control.pipe_in, 0x80U, phost->device.address, - phost->device.speed, USBH_EP_CONTROL, - (uint16_t)phost->Control.pipe_size); - - /* Open Control pipes */ - (void)USBH_OpenPipe(phost, phost->Control.pipe_out, 0x00U, phost->device.address, - phost->device.speed, USBH_EP_CONTROL, - (uint16_t)phost->Control.pipe_size); - } - else if (ReqStatus == USBH_NOT_SUPPORTED) - { - USBH_ErrLog("Control error: Device Set Address request failed"); - - /* Buggy Device can't complete get device desc request */ - USBH_UsrLog("Control error, Device not Responding Please unplug the Device."); - phost->gState = HOST_ABORT_STATE; - phost->EnumState = ENUM_IDLE; - } - else - { - /* .. */ - } - break; - - case ENUM_GET_CFG_DESC: - /* get standard configuration descriptor */ - ReqStatus = USBH_Get_CfgDesc(phost, USB_CONFIGURATION_DESC_SIZE); - if (ReqStatus == USBH_OK) - { - phost->EnumState = ENUM_GET_FULL_CFG_DESC; - } - else if (ReqStatus == USBH_NOT_SUPPORTED) - { - USBH_ErrLog("Control error: Get Device configuration descriptor request failed"); - phost->device.EnumCnt++; - if (phost->device.EnumCnt > 3U) - { - /* Buggy Device can't complete get device desc request */ - USBH_UsrLog("Control error, Device not Responding Please unplug the Device."); - phost->gState = HOST_ABORT_STATE; - } - else - { - /* Free control pipes */ - (void)USBH_FreePipe(phost, phost->Control.pipe_out); - (void)USBH_FreePipe(phost, phost->Control.pipe_in); - - /* Reset the USB Device */ - phost->EnumState = ENUM_IDLE; - phost->gState = HOST_IDLE; - } - } - else - { - /* .. */ - } - break; - - case ENUM_GET_FULL_CFG_DESC: - /* get FULL config descriptor (config, interface, endpoints) */ - ReqStatus = USBH_Get_CfgDesc(phost, phost->device.CfgDesc.wTotalLength); - if (ReqStatus == USBH_OK) - { - phost->EnumState = ENUM_GET_MFC_STRING_DESC; - } - else if (ReqStatus == USBH_NOT_SUPPORTED) - { - USBH_ErrLog("Control error: Get Device configuration descriptor request failed"); - phost->device.EnumCnt++; - if (phost->device.EnumCnt > 3U) - { - /* Buggy Device can't complete get device desc request */ - USBH_UsrLog("Control error, Device not Responding Please unplug the Device."); - phost->gState = HOST_ABORT_STATE; - } - else - { - /* Free control pipes */ - (void)USBH_FreePipe(phost, phost->Control.pipe_out); - (void)USBH_FreePipe(phost, phost->Control.pipe_in); - - /* Reset the USB Device */ - phost->EnumState = ENUM_IDLE; - phost->gState = HOST_IDLE; - } - } - else - { - /* .. */ - } - break; - - case ENUM_GET_MFC_STRING_DESC: - if (phost->device.DevDesc.iManufacturer != 0U) - { - /* Check that Manufacturer String is available */ - ReqStatus = USBH_Get_StringDesc(phost, phost->device.DevDesc.iManufacturer, - phost->device.Data, 0xFFU); - if (ReqStatus == USBH_OK) - { - /* User callback for Manufacturing string */ - USBH_UsrLog("Manufacturer : %s", (char *)(void *)phost->device.Data); - phost->EnumState = ENUM_GET_PRODUCT_STRING_DESC; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else if (ReqStatus == USBH_NOT_SUPPORTED) - { - USBH_UsrLog("Manufacturer : N/A"); - phost->EnumState = ENUM_GET_PRODUCT_STRING_DESC; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else - { - /* .. */ - } - } - else - { - USBH_UsrLog("Manufacturer : N/A"); - phost->EnumState = ENUM_GET_PRODUCT_STRING_DESC; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - break; - - case ENUM_GET_PRODUCT_STRING_DESC: - if (phost->device.DevDesc.iProduct != 0U) - { - /* Check that Product string is available */ - ReqStatus = USBH_Get_StringDesc(phost, phost->device.DevDesc.iProduct, - phost->device.Data, 0xFFU); - if (ReqStatus == USBH_OK) - { - /* User callback for Product string */ - USBH_UsrLog("Product : %s", (char *)(void *)phost->device.Data); - phost->EnumState = ENUM_GET_SERIALNUM_STRING_DESC; - } - else if (ReqStatus == USBH_NOT_SUPPORTED) - { - USBH_UsrLog("Product : N/A"); - phost->EnumState = ENUM_GET_SERIALNUM_STRING_DESC; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else - { - /* .. */ - } - } - else - { - USBH_UsrLog("Product : N/A"); - phost->EnumState = ENUM_GET_SERIALNUM_STRING_DESC; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_STATE_CHANGED_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - break; - - case ENUM_GET_SERIALNUM_STRING_DESC: - if (phost->device.DevDesc.iSerialNumber != 0U) - { - /* Check that Serial number string is available */ - ReqStatus = USBH_Get_StringDesc(phost, phost->device.DevDesc.iSerialNumber, - phost->device.Data, 0xFFU); - if (ReqStatus == USBH_OK) - { - /* User callback for Serial number string */ - USBH_UsrLog("Serial Number : %s", (char *)(void *)phost->device.Data); - Status = USBH_OK; - } - else if (ReqStatus == USBH_NOT_SUPPORTED) - { - USBH_UsrLog("Serial Number : N/A"); - Status = USBH_OK; - } - else - { - /* .. */ - } - } - else - { - USBH_UsrLog("Serial Number : N/A"); - Status = USBH_OK; - } - break; - - default: - break; - } - return Status; -} - - -/** - * @brief USBH_LL_SetTimer - * Set the initial Host Timer tick - * @param phost: Host Handle - * @retval None - */ -void USBH_LL_SetTimer(USBH_HandleTypeDef *phost, uint32_t time) -{ - phost->Timer = time; -} - - -/** - * @brief USBH_LL_IncTimer - * Increment Host Timer tick - * @param phost: Host Handle - * @retval None - */ -void USBH_LL_IncTimer(USBH_HandleTypeDef *phost) -{ - phost->Timer++; - USBH_HandleSof(phost); -} - - -/** - * @brief USBH_HandleSof - * Call SOF process - * @param phost: Host Handle - * @retval None - */ -static void USBH_HandleSof(USBH_HandleTypeDef *phost) -{ - if ((phost->gState == HOST_CLASS) && (phost->pActiveClass != NULL)) - { - phost->pActiveClass->SOFProcess(phost); - } -} - - -/** - * @brief USBH_PortEnabled - * Port Enabled - * @param phost: Host Handle - * @retval None - */ -void USBH_LL_PortEnabled(USBH_HandleTypeDef *phost) -{ - phost->device.PortEnabled = 1U; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - - return; -} - - -/** - * @brief USBH_LL_PortDisabled - * Port Disabled - * @param phost: Host Handle - * @retval None - */ -void USBH_LL_PortDisabled(USBH_HandleTypeDef *phost) -{ - phost->device.PortEnabled = 0U; - - return; -} - - -/** - * @brief HCD_IsPortEnabled - * Is Port Enabled - * @param phost: Host Handle - * @retval None - */ -uint8_t USBH_IsPortEnabled(USBH_HandleTypeDef *phost) -{ - return (phost->device.PortEnabled); -} - - -/** - * @brief USBH_LL_Connect - * Handle USB Host connexion event - * @param phost: Host Handle - * @retval USBH_Status - */ -USBH_StatusTypeDef USBH_LL_Connect(USBH_HandleTypeDef *phost) -{ - phost->device.is_connected = 1U; - phost->device.is_disconnected = 0U; - phost->device.is_ReEnumerated = 0U; - - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - - return USBH_OK; -} - - -/** - * @brief USBH_LL_Disconnect - * Handle USB Host disconnection event - * @param phost: Host Handle - * @retval USBH_Status - */ -USBH_StatusTypeDef USBH_LL_Disconnect(USBH_HandleTypeDef *phost) -{ - /* update device connection states */ - phost->device.is_disconnected = 1U; - phost->device.is_connected = 0U; - phost->device.PortEnabled = 0U; - - /* Stop Host */ - (void)USBH_LL_Stop(phost); - - /* FRee Control Pipes */ - (void)USBH_FreePipe(phost, phost->Control.pipe_in); - (void)USBH_FreePipe(phost, phost->Control.pipe_out); -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_PORT_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - - return USBH_OK; -} - - -#if (USBH_USE_OS == 1U) -/** - * @brief USB Host Thread task - * @param pvParameters not used - * @retval None - */ - -#if (osCMSIS < 0x20000U) -static void USBH_Process_OS(void const *argument) -{ - osEvent event; - - for (;;) - { - event = osMessageGet(((USBH_HandleTypeDef *)argument)->os_event, osWaitForever); - if (event.status == osEventMessage) - { - USBH_Process((USBH_HandleTypeDef *)argument); - } - } -} -#else -static void USBH_Process_OS(void *argument) -{ - osStatus_t status; - - for (;;) - { - status = osMessageQueueGet(((USBH_HandleTypeDef *)argument)->os_event, - &((USBH_HandleTypeDef *)argument)->os_msg, NULL, osWaitForever); - if (status == osOK) - { - USBH_Process((USBH_HandleTypeDef *)argument); - } - } -} -#endif /* (osCMSIS < 0x20000U) */ - - -/** - * @brief USBH_LL_NotifyURBChange - * Notify URB state Change - * @param phost: Host handle - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_LL_NotifyURBChange(USBH_HandleTypeDef *phost) -{ - phost->os_msg = (uint32_t)USBH_PORT_EVENT; - -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif - - return USBH_OK; -} -#endif -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_ctlreq.c b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_ctlreq.c deleted file mode 100644 index b638b50..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_ctlreq.c +++ /dev/null @@ -1,1140 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_ctlreq.c - * @author MCD Application Team - * @brief This file implements the control requests for device enumeration - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_ctlreq.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_CTLREQ - * @brief This file implements the standard requests for device enumeration - * @{ - */ - - -/** @defgroup USBH_CTLREQ_Private_Defines - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_CTLREQ_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - - -/** @defgroup USBH_CTLREQ_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_CTLREQ_Private_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_CTLREQ_Private_FunctionPrototypes - * @{ - */ -static USBH_StatusTypeDef USBH_HandleControl(USBH_HandleTypeDef *phost); - -static void USBH_ParseDevDesc(USBH_DevDescTypeDef *dev_desc, - uint8_t *buf, uint16_t length); - -static USBH_StatusTypeDef USBH_ParseCfgDesc(USBH_HandleTypeDef *phost, - uint8_t *buf, uint16_t length); - -static USBH_StatusTypeDef USBH_ParseEPDesc(USBH_HandleTypeDef *phost, USBH_EpDescTypeDef *ep_descriptor, uint8_t *buf); -static void USBH_ParseStringDesc(uint8_t *psrc, uint8_t *pdest, uint16_t length); -static void USBH_ParseInterfaceDesc(USBH_InterfaceDescTypeDef *if_descriptor, uint8_t *buf); - - -/** - * @} - */ - - -/** @defgroup USBH_CTLREQ_Private_Functions - * @{ - */ - - -/** - * @brief USBH_Get_DevDesc - * Issue Get Device Descriptor command to the device. Once the response - * received, it parses the device descriptor and updates the status. - * @param phost: Host Handle - * @param length: Length of the descriptor - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_Get_DevDesc(USBH_HandleTypeDef *phost, uint8_t length) -{ - USBH_StatusTypeDef status; - - status = USBH_GetDescriptor(phost, - USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD, - USB_DESC_DEVICE, phost->device.Data, - (uint16_t)length); - - if (status == USBH_OK) - { - /* Commands successfully sent and Response Received */ - USBH_ParseDevDesc(&phost->device.DevDesc, phost->device.Data, - (uint16_t)length); - } - - return status; -} - - -/** - * @brief USBH_Get_CfgDesc - * Issues Configuration Descriptor to the device. Once the response - * received, it parses the configuration descriptor and updates the - * status. - * @param phost: Host Handle - * @param length: Length of the descriptor - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_Get_CfgDesc(USBH_HandleTypeDef *phost, - uint16_t length) - -{ - USBH_StatusTypeDef status; - uint8_t *pData = phost->device.CfgDesc_Raw; - - status = USBH_GetDescriptor(phost, (USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD), - USB_DESC_CONFIGURATION, pData, length); - - if (status == USBH_OK) - { - /* Commands successfully sent and Response Received */ - status = USBH_ParseCfgDesc(phost, pData, length); - } - - return status; -} - - -/** - * @brief USBH_Get_StringDesc - * Issues string Descriptor command to the device. Once the response - * received, it parses the string descriptor and updates the status. - * @param phost: Host Handle - * @param string_index: String index for the descriptor - * @param buff: Buffer address for the descriptor - * @param length: Length of the descriptor - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_Get_StringDesc(USBH_HandleTypeDef *phost, - uint8_t string_index, uint8_t *buff, - uint16_t length) -{ - USBH_StatusTypeDef status; - - status = USBH_GetDescriptor(phost, - USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD, - USB_DESC_STRING | string_index, - phost->device.Data, length); - - if (status == USBH_OK) - { - /* Commands successfully sent and Response Received */ - USBH_ParseStringDesc(phost->device.Data, buff, length); - } - - return status; -} - - -/** - * @brief USBH_GetDescriptor - * Issues Descriptor command to the device. Once the response received, - * it parses the descriptor and updates the status. - * @param phost: Host Handle - * @param req_type: Descriptor type - * @param value_idx: Value for the GetDescriptr request - * @param buff: Buffer to store the descriptor - * @param length: Length of the descriptor - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_GetDescriptor(USBH_HandleTypeDef *phost, - uint8_t req_type, - uint16_t value_idx, - uint8_t *buff, - uint16_t length) -{ - if (phost->RequestState == CMD_SEND) - { - phost->Control.setup.b.bmRequestType = USB_D2H | req_type; - phost->Control.setup.b.bRequest = USB_REQ_GET_DESCRIPTOR; - phost->Control.setup.b.wValue.w = value_idx; - - if ((value_idx & 0xff00U) == USB_DESC_STRING) - { - phost->Control.setup.b.wIndex.w = 0x0409U; - } - else - { - phost->Control.setup.b.wIndex.w = 0U; - } - phost->Control.setup.b.wLength.w = length; - } - - return USBH_CtlReq(phost, buff, length); -} - - -/** - * @brief USBH_SetAddress - * This command sets the address to the connected device - * @param phost: Host Handle - * @param DeviceAddress: Device address to assign - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_SetAddress(USBH_HandleTypeDef *phost, - uint8_t DeviceAddress) -{ - if (phost->RequestState == CMD_SEND) - { - phost->Control.setup.b.bmRequestType = USB_H2D | USB_REQ_RECIPIENT_DEVICE | \ - USB_REQ_TYPE_STANDARD; - - phost->Control.setup.b.bRequest = USB_REQ_SET_ADDRESS; - - phost->Control.setup.b.wValue.w = (uint16_t)DeviceAddress; - phost->Control.setup.b.wIndex.w = 0U; - phost->Control.setup.b.wLength.w = 0U; - } - - return USBH_CtlReq(phost, NULL, 0U); -} - - -/** - * @brief USBH_SetCfg - * The command sets the configuration value to the connected device - * @param phost: Host Handle - * @param cfg_idx: Configuration value - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_SetCfg(USBH_HandleTypeDef *phost, uint16_t cfg_idx) -{ - if (phost->RequestState == CMD_SEND) - { - phost->Control.setup.b.bmRequestType = USB_H2D | USB_REQ_RECIPIENT_DEVICE - | USB_REQ_TYPE_STANDARD; - - phost->Control.setup.b.bRequest = USB_REQ_SET_CONFIGURATION; - phost->Control.setup.b.wValue.w = cfg_idx; - phost->Control.setup.b.wIndex.w = 0U; - phost->Control.setup.b.wLength.w = 0U; - } - - return USBH_CtlReq(phost, NULL, 0U); -} - - -/** - * @brief USBH_SetInterface - * The command sets the Interface value to the connected device - * @param phost: Host Handle - * @param altSetting: Interface value - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_SetInterface(USBH_HandleTypeDef *phost, uint8_t ep_num, - uint8_t altSetting) -{ - if (phost->RequestState == CMD_SEND) - { - phost->Control.setup.b.bmRequestType = USB_H2D | USB_REQ_RECIPIENT_INTERFACE - | USB_REQ_TYPE_STANDARD; - - phost->Control.setup.b.bRequest = USB_REQ_SET_INTERFACE; - phost->Control.setup.b.wValue.w = altSetting; - phost->Control.setup.b.wIndex.w = ep_num; - phost->Control.setup.b.wLength.w = 0U; - } - - return USBH_CtlReq(phost, NULL, 0U); -} - - -/** - * @brief USBH_SetFeature - * The command sets the device features (remote wakeup feature,..) - * @param pdev: Selected device - * @param itf_idx - * @retval Status - */ -USBH_StatusTypeDef USBH_SetFeature(USBH_HandleTypeDef *phost, uint8_t wValue) -{ - if (phost->RequestState == CMD_SEND) - { - phost->Control.setup.b.bmRequestType = USB_H2D | USB_REQ_RECIPIENT_DEVICE - | USB_REQ_TYPE_STANDARD; - - phost->Control.setup.b.bRequest = USB_REQ_SET_FEATURE; - phost->Control.setup.b.wValue.w = wValue; - phost->Control.setup.b.wIndex.w = 0U; - phost->Control.setup.b.wLength.w = 0U; - } - - return USBH_CtlReq(phost, NULL, 0U); -} - - -/** - * @brief USBH_ClrFeature - * This request is used to clear or disable a specific feature. - * @param phost: Host Handle - * @param ep_num: endpoint number - * @param hc_num: Host channel number - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_ClrFeature(USBH_HandleTypeDef *phost, uint8_t ep_num) -{ - if (phost->RequestState == CMD_SEND) - { - phost->Control.setup.b.bmRequestType = USB_H2D | USB_REQ_RECIPIENT_ENDPOINT - | USB_REQ_TYPE_STANDARD; - - phost->Control.setup.b.bRequest = USB_REQ_CLEAR_FEATURE; - phost->Control.setup.b.wValue.w = FEATURE_SELECTOR_ENDPOINT; - phost->Control.setup.b.wIndex.w = ep_num; - phost->Control.setup.b.wLength.w = 0U; - } - return USBH_CtlReq(phost, NULL, 0U); -} - - -/** - * @brief USBH_ParseDevDesc - * This function Parses the device descriptor - * @param dev_desc: device_descriptor destination address - * @param buf: Buffer where the source descriptor is available - * @param length: Length of the descriptor - * @retval None - */ -static void USBH_ParseDevDesc(USBH_DevDescTypeDef *dev_desc, uint8_t *buf, - uint16_t length) -{ - dev_desc->bLength = *(uint8_t *)(buf + 0); - dev_desc->bDescriptorType = *(uint8_t *)(buf + 1); - dev_desc->bcdUSB = LE16(buf + 2); - dev_desc->bDeviceClass = *(uint8_t *)(buf + 4); - dev_desc->bDeviceSubClass = *(uint8_t *)(buf + 5); - dev_desc->bDeviceProtocol = *(uint8_t *)(buf + 6); - dev_desc->bMaxPacketSize = *(uint8_t *)(buf + 7); - - /* Make sure that the max packet size is either 8, 16, 32, 64 or force it to 64 */ - switch (dev_desc->bMaxPacketSize) - { - case 8: - case 16: - case 32: - case 64: - dev_desc->bMaxPacketSize = dev_desc->bMaxPacketSize; - break; - - default: - /*set the size to 64 in case the device has answered with incorrect size */ - dev_desc->bMaxPacketSize = 64U; - break; - } - - if (length > 8U) - { - /* For 1st time after device connection, Host may issue only 8 bytes for - Device Descriptor Length */ - dev_desc->idVendor = LE16(buf + 8); - dev_desc->idProduct = LE16(buf + 10); - dev_desc->bcdDevice = LE16(buf + 12); - dev_desc->iManufacturer = *(uint8_t *)(buf + 14); - dev_desc->iProduct = *(uint8_t *)(buf + 15); - dev_desc->iSerialNumber = *(uint8_t *)(buf + 16); - dev_desc->bNumConfigurations = *(uint8_t *)(buf + 17); - } -} - - -/** - * @brief USBH_ParseCfgDesc - * This function Parses the configuration descriptor - * @param phost: USB Host handler - * @param buf: Buffer where the source descriptor is available - * @param length: Length of the descriptor - * @retval USBH statuse - */ -static USBH_StatusTypeDef USBH_ParseCfgDesc(USBH_HandleTypeDef *phost, uint8_t *buf, uint16_t length) -{ - USBH_CfgDescTypeDef *cfg_desc = &phost->device.CfgDesc; - USBH_StatusTypeDef status = USBH_OK; - USBH_InterfaceDescTypeDef *pif ; - USBH_EpDescTypeDef *pep; - USBH_DescHeader_t *pdesc = (USBH_DescHeader_t *)(void *)buf; - uint16_t ptr; - uint8_t if_ix = 0U; - uint8_t ep_ix = 0U; - - pdesc = (USBH_DescHeader_t *)(void *)buf; - - /* Parse configuration descriptor */ - cfg_desc->bLength = *(uint8_t *)(buf + 0); - cfg_desc->bDescriptorType = *(uint8_t *)(buf + 1); - cfg_desc->wTotalLength = MIN(((uint16_t) LE16(buf + 2)), ((uint16_t)USBH_MAX_SIZE_CONFIGURATION)); - cfg_desc->bNumInterfaces = *(uint8_t *)(buf + 4); - cfg_desc->bConfigurationValue = *(uint8_t *)(buf + 5); - cfg_desc->iConfiguration = *(uint8_t *)(buf + 6); - cfg_desc->bmAttributes = *(uint8_t *)(buf + 7); - cfg_desc->bMaxPower = *(uint8_t *)(buf + 8); - - /* Make sure that the Confguration descriptor's bLength is equal to USB_CONFIGURATION_DESC_SIZE */ - if (cfg_desc->bLength != USB_CONFIGURATION_DESC_SIZE) - { - cfg_desc->bLength = USB_CONFIGURATION_DESC_SIZE; - } - - if (length > USB_CONFIGURATION_DESC_SIZE) - { - ptr = USB_LEN_CFG_DESC; - pif = (USBH_InterfaceDescTypeDef *)NULL; - - while ((if_ix < USBH_MAX_NUM_INTERFACES) && (ptr < cfg_desc->wTotalLength)) - { - pdesc = USBH_GetNextDesc((uint8_t *)(void *)pdesc, &ptr); - if (pdesc->bDescriptorType == USB_DESC_TYPE_INTERFACE) - { - /* Make sure that the interface descriptor's bLength is equal to USB_INTERFACE_DESC_SIZE */ - if (pdesc->bLength != USB_INTERFACE_DESC_SIZE) - { - pdesc->bLength = USB_INTERFACE_DESC_SIZE; - } - - pif = &cfg_desc->Itf_Desc[if_ix]; - USBH_ParseInterfaceDesc(pif, (uint8_t *)(void *)pdesc); - - ep_ix = 0U; - pep = (USBH_EpDescTypeDef *)NULL; - - while ((ep_ix < pif->bNumEndpoints) && (ptr < cfg_desc->wTotalLength)) - { - pdesc = USBH_GetNextDesc((uint8_t *)(void *)pdesc, &ptr); - - if (pdesc->bDescriptorType == USB_DESC_TYPE_ENDPOINT) - { - /* Check if the endpoint is appartening to an audio streaming interface */ - if ((pif->bInterfaceClass == 0x01U) && (pif->bInterfaceSubClass == 0x02U)) - { - /* Check if it is supporting the USB AUDIO 01 class specification */ - if ((pif->bInterfaceProtocol == 0x00U) && (pdesc->bLength != 0x09U)) - { - pdesc->bLength = 0x09U; - } - } - /* Make sure that the endpoint descriptor's bLength is equal to - USB_ENDPOINT_DESC_SIZE for all other endpoints types */ - else if (pdesc->bLength != USB_ENDPOINT_DESC_SIZE) - { - pdesc->bLength = USB_ENDPOINT_DESC_SIZE; - } - else - { - /* ... */ - } - - pep = &cfg_desc->Itf_Desc[if_ix].Ep_Desc[ep_ix]; - - status = USBH_ParseEPDesc(phost, pep, (uint8_t *)(void *)pdesc); - - ep_ix++; - } - } - - /* Check if the required endpoint(s) data are parsed */ - if (ep_ix < pif->bNumEndpoints) - { - return USBH_NOT_SUPPORTED; - } - - if_ix++; - } - } - - /* Check if the required interface(s) data are parsed */ - if (if_ix < MIN(cfg_desc->bNumInterfaces, (uint8_t)USBH_MAX_NUM_INTERFACES)) - { - return USBH_NOT_SUPPORTED; - } - } - - return status; -} - - -/** - * @brief USBH_ParseInterfaceDesc - * This function Parses the interface descriptor - * @param if_descriptor : Interface descriptor destination - * @param buf: Buffer where the descriptor data is available - * @retval None - */ -static void USBH_ParseInterfaceDesc(USBH_InterfaceDescTypeDef *if_descriptor, - uint8_t *buf) -{ - if_descriptor->bLength = *(uint8_t *)(buf + 0); - if_descriptor->bDescriptorType = *(uint8_t *)(buf + 1); - if_descriptor->bInterfaceNumber = *(uint8_t *)(buf + 2); - if_descriptor->bAlternateSetting = *(uint8_t *)(buf + 3); - if_descriptor->bNumEndpoints = *(uint8_t *)(buf + 4); - if_descriptor->bInterfaceClass = *(uint8_t *)(buf + 5); - if_descriptor->bInterfaceSubClass = *(uint8_t *)(buf + 6); - if_descriptor->bInterfaceProtocol = *(uint8_t *)(buf + 7); - if_descriptor->iInterface = *(uint8_t *)(buf + 8); -} - - -/** - * @brief USBH_ParseEPDesc - * This function Parses the endpoint descriptor - * @param phost: USB Host handler - * @param ep_descriptor: Endpoint descriptor destination address - * @param buf: Buffer where the parsed descriptor stored - * @retval USBH Status - */ -static USBH_StatusTypeDef USBH_ParseEPDesc(USBH_HandleTypeDef *phost, USBH_EpDescTypeDef *ep_descriptor, - uint8_t *buf) -{ - USBH_StatusTypeDef status = USBH_OK; - ep_descriptor->bLength = *(uint8_t *)(buf + 0); - ep_descriptor->bDescriptorType = *(uint8_t *)(buf + 1); - ep_descriptor->bEndpointAddress = *(uint8_t *)(buf + 2); - ep_descriptor->bmAttributes = *(uint8_t *)(buf + 3); - ep_descriptor->wMaxPacketSize = LE16(buf + 4); - ep_descriptor->bInterval = *(uint8_t *)(buf + 6); - - /* Make sure that wMaxPacketSize is different from 0 */ - if (ep_descriptor->wMaxPacketSize == 0x00U) - { - status = USBH_NOT_SUPPORTED; - } - else if (USBH_MAX_EP_PACKET_SIZE < (uint16_t)USBH_MAX_DATA_BUFFER) - { - /* Make sure that maximum packet size (bits 0..10) does not exceed the max endpoint packet size */ - ep_descriptor->wMaxPacketSize &= ~0x7FFU; - ep_descriptor->wMaxPacketSize |= MIN((uint16_t)(LE16(buf + 4) & 0x7FFU), (uint16_t)USBH_MAX_EP_PACKET_SIZE); - - } - else if ((uint16_t)USBH_MAX_DATA_BUFFER < USBH_MAX_EP_PACKET_SIZE) - { - /* Make sure that maximum packet size (bits 0..10) does not exceed the total buffer length */ - ep_descriptor->wMaxPacketSize &= ~0x7FFU; - ep_descriptor->wMaxPacketSize |= MIN((uint16_t)(LE16(buf + 4) & 0x7FFU), (uint16_t)USBH_MAX_DATA_BUFFER); - } - else - { - /* ... */ - } - - /* For high-speed interrupt/isochronous endpoints, bInterval can vary from 1 to 16 */ - if (phost->device.speed == (uint8_t)USBH_SPEED_HIGH) - { - if (((ep_descriptor->bmAttributes & EP_TYPE_MSK) == EP_TYPE_ISOC) || - ((ep_descriptor->bmAttributes & EP_TYPE_MSK) == EP_TYPE_INTR)) - { - if ((ep_descriptor->bInterval == 0U) || (ep_descriptor->bInterval > 0x10U)) - { - status = USBH_NOT_SUPPORTED; - } - } - } - else - { - /* For full-speed isochronous endpoints, the value of bInterval must be in the range from 1 to 16.*/ - if ((ep_descriptor->bmAttributes & EP_TYPE_MSK) == EP_TYPE_ISOC) - { - if ((ep_descriptor->bInterval == 0U) || (ep_descriptor->bInterval > 0x10U)) - { - status = USBH_NOT_SUPPORTED; - } - } - /* For full-/low-speed interrupt endpoints, the value of bInterval may be from 1 to 255.*/ - else if ((ep_descriptor->bmAttributes & EP_TYPE_MSK) == EP_TYPE_INTR) - { - if (ep_descriptor->bInterval == 0U) - { - status = USBH_NOT_SUPPORTED; - } - } - else - { - /* ... */ - } - } - - return status; -} - - -/** - * @brief USBH_ParseStringDesc - * This function Parses the string descriptor - * @param psrc: Source pointer containing the descriptor data - * @param pdest: Destination address pointer - * @param length: Length of the descriptor - * @retval None - */ -static void USBH_ParseStringDesc(uint8_t *psrc, uint8_t *pdest, uint16_t length) -{ - uint16_t strlength; - uint16_t idx; - - /* The UNICODE string descriptor is not NULL-terminated. The string length is - computed by subtracting two from the value of the first byte of the descriptor. - */ - - /* Check which is lower size, the Size of string or the length of bytes read - from the device */ - - if (psrc[1] == USB_DESC_TYPE_STRING) - { - /* Make sure the Descriptor is String Type */ - - /* psrc[0] contains Size of Descriptor, subtract 2 to get the length of string */ - strlength = ((((uint16_t)psrc[0] - 2U) <= length) ? ((uint16_t)psrc[0] - 2U) : length); - - /* Adjust the offset ignoring the String Len and Descriptor type */ - psrc += 2U; - - for (idx = 0U; idx < strlength; idx += 2U) - { - /* Copy Only the string and ignore the UNICODE ID, hence add the src */ - *pdest = psrc[idx]; - pdest++; - } - *pdest = 0U; /* mark end of string */ - } -} - - -/** - * @brief USBH_GetNextDesc - * This function return the next descriptor header - * @param buf: Buffer where the cfg descriptor is available - * @param ptr: data pointer inside the cfg descriptor - * @retval next header - */ -USBH_DescHeader_t *USBH_GetNextDesc(uint8_t *pbuf, uint16_t *ptr) -{ - USBH_DescHeader_t *pnext; - - *ptr += ((USBH_DescHeader_t *)(void *)pbuf)->bLength; - pnext = (USBH_DescHeader_t *)(void *)((uint8_t *)(void *)pbuf + \ - ((USBH_DescHeader_t *)(void *)pbuf)->bLength); - - return (pnext); -} - - -/** - * @brief USBH_CtlReq - * USBH_CtlReq sends a control request and provide the status after - * completion of the request - * @param phost: Host Handle - * @param req: Setup Request Structure - * @param buff: data buffer address to store the response - * @param length: length of the response - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_CtlReq(USBH_HandleTypeDef *phost, uint8_t *buff, - uint16_t length) -{ - USBH_StatusTypeDef status; - status = USBH_BUSY; - - switch (phost->RequestState) - { - case CMD_SEND: - /* Start a SETUP transfer */ - phost->Control.buff = buff; - phost->Control.length = length; - phost->Control.state = CTRL_SETUP; - phost->RequestState = CMD_WAIT; - status = USBH_BUSY; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - case CMD_WAIT: - status = USBH_HandleControl(phost); - if ((status == USBH_OK) || (status == USBH_NOT_SUPPORTED)) - { - /* Transaction completed, move control state to idle */ - phost->RequestState = CMD_SEND; - phost->Control.state = CTRL_IDLE; - } - else if (status == USBH_FAIL) - { - /* Failure Mode */ - phost->RequestState = CMD_SEND; - } - else - { - /* .. */ - } -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - break; - - default: - break; - } - return status; -} - - -/** - * @brief USBH_HandleControl - * Handles the USB control transfer state machine - * @param phost: Host Handle - * @retval USBH Status - */ -static USBH_StatusTypeDef USBH_HandleControl(USBH_HandleTypeDef *phost) -{ - uint8_t direction; - USBH_StatusTypeDef status = USBH_BUSY; - USBH_URBStateTypeDef URB_Status = USBH_URB_IDLE; - - switch (phost->Control.state) - { - case CTRL_SETUP: - /* send a SETUP packet */ - (void)USBH_CtlSendSetup(phost, (uint8_t *)(void *)phost->Control.setup.d8, - phost->Control.pipe_out); - - phost->Control.state = CTRL_SETUP_WAIT; - break; - - case CTRL_SETUP_WAIT: - - URB_Status = USBH_LL_GetURBState(phost, phost->Control.pipe_out); - /* case SETUP packet sent successfully */ - if (URB_Status == USBH_URB_DONE) - { - direction = (phost->Control.setup.b.bmRequestType & USB_REQ_DIR_MASK); - - /* check if there is a data stage */ - if (phost->Control.setup.b.wLength.w != 0U) - { - if (direction == USB_D2H) - { - /* Data Direction is IN */ - phost->Control.state = CTRL_DATA_IN; - } - else - { - /* Data Direction is OUT */ - phost->Control.state = CTRL_DATA_OUT; - } - } - /* No DATA stage */ - else - { - /* If there is No Data Transfer Stage */ - if (direction == USB_D2H) - { - /* Data Direction is IN */ - phost->Control.state = CTRL_STATUS_OUT; - } - else - { - /* Data Direction is OUT */ - phost->Control.state = CTRL_STATUS_IN; - } - } - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else - { - if ((URB_Status == USBH_URB_ERROR) || (URB_Status == USBH_URB_NOTREADY)) - { - phost->Control.state = CTRL_ERROR; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - } - break; - - case CTRL_DATA_IN: - /* Issue an IN token */ - phost->Control.timer = (uint16_t)phost->Timer; - (void)USBH_CtlReceiveData(phost, phost->Control.buff, - phost->Control.length, phost->Control.pipe_in); - - phost->Control.state = CTRL_DATA_IN_WAIT; - break; - - case CTRL_DATA_IN_WAIT: - - URB_Status = USBH_LL_GetURBState(phost, phost->Control.pipe_in); - - /* check is DATA packet transferred successfully */ - if (URB_Status == USBH_URB_DONE) - { - phost->Control.state = CTRL_STATUS_OUT; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - - /* manage error cases*/ - if (URB_Status == USBH_URB_STALL) - { - /* In stall case, return to previous machine state*/ - status = USBH_NOT_SUPPORTED; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else - { - if (URB_Status == USBH_URB_ERROR) - { - /* Device error */ - phost->Control.state = CTRL_ERROR; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - } - break; - - case CTRL_DATA_OUT: - - (void)USBH_CtlSendData(phost, phost->Control.buff, phost->Control.length, - phost->Control.pipe_out, 1U); - - phost->Control.timer = (uint16_t)phost->Timer; - phost->Control.state = CTRL_DATA_OUT_WAIT; - break; - - case CTRL_DATA_OUT_WAIT: - - URB_Status = USBH_LL_GetURBState(phost, phost->Control.pipe_out); - - if (URB_Status == USBH_URB_DONE) - { - /* If the Setup Pkt is sent successful, then change the state */ - phost->Control.state = CTRL_STATUS_IN; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - - /* handle error cases */ - else if (URB_Status == USBH_URB_STALL) - { - /* In stall case, return to previous machine state*/ - phost->Control.state = CTRL_STALLED; - status = USBH_NOT_SUPPORTED; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else if (URB_Status == USBH_URB_NOTREADY) - { - /* Nack received from device */ - phost->Control.state = CTRL_DATA_OUT; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else - { - if (URB_Status == USBH_URB_ERROR) - { - /* device error */ - phost->Control.state = CTRL_ERROR; - status = USBH_FAIL; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - } - break; - - case CTRL_STATUS_IN: - /* Send 0 bytes out packet */ - (void)USBH_CtlReceiveData(phost, NULL, 0U, phost->Control.pipe_in); - - phost->Control.timer = (uint16_t)phost->Timer; - phost->Control.state = CTRL_STATUS_IN_WAIT; - - break; - - case CTRL_STATUS_IN_WAIT: - - URB_Status = USBH_LL_GetURBState(phost, phost->Control.pipe_in); - - if (URB_Status == USBH_URB_DONE) - { - /* Control transfers completed, Exit the State Machine */ - phost->Control.state = CTRL_COMPLETE; - status = USBH_OK; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else if (URB_Status == USBH_URB_ERROR) - { - phost->Control.state = CTRL_ERROR; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else - { - if (URB_Status == USBH_URB_STALL) - { - /* Control transfers completed, Exit the State Machine */ - status = USBH_NOT_SUPPORTED; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - } - break; - - case CTRL_STATUS_OUT: - (void)USBH_CtlSendData(phost, NULL, 0U, phost->Control.pipe_out, 1U); - - phost->Control.timer = (uint16_t)phost->Timer; - phost->Control.state = CTRL_STATUS_OUT_WAIT; - break; - - case CTRL_STATUS_OUT_WAIT: - URB_Status = USBH_LL_GetURBState(phost, phost->Control.pipe_out); - if (URB_Status == USBH_URB_DONE) - { - status = USBH_OK; - phost->Control.state = CTRL_COMPLETE; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else if (URB_Status == USBH_URB_NOTREADY) - { - phost->Control.state = CTRL_STATUS_OUT; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - else - { - if (URB_Status == USBH_URB_ERROR) - { - phost->Control.state = CTRL_ERROR; - -#if (USBH_USE_OS == 1U) - phost->os_msg = (uint32_t)USBH_CONTROL_EVENT; -#if (osCMSIS < 0x20000U) - (void)osMessagePut(phost->os_event, phost->os_msg, 0U); -#else - (void)osMessageQueuePut(phost->os_event, &phost->os_msg, 0U, 0U); -#endif -#endif - } - } - break; - - case CTRL_ERROR: - /* - After a halt condition is encountered or an error is detected by the - host, a control endpoint is allowed to recover by accepting the next Setup - PID; i.e., recovery actions via some other pipe are not required for control - endpoints. For the Default Control Pipe, a device reset will ultimately be - required to clear the halt or error condition if the next Setup PID is not - accepted. - */ - if (++phost->Control.errorcount <= USBH_MAX_ERROR_COUNT) - { - /* Do the transmission again, starting from SETUP Packet */ - phost->Control.state = CTRL_SETUP; - phost->RequestState = CMD_SEND; - } - else - { - phost->pUser(phost, HOST_USER_UNRECOVERED_ERROR); - phost->Control.errorcount = 0U; - USBH_ErrLog("Control error: Device not responding"); - - /* Free control pipes */ - (void)USBH_FreePipe(phost, phost->Control.pipe_out); - (void)USBH_FreePipe(phost, phost->Control.pipe_in); - - phost->gState = HOST_IDLE; - status = USBH_FAIL; - } - break; - - default: - break; - } - - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - - - diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_ioreq.c b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_ioreq.c deleted file mode 100644 index e3a7bbe..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_ioreq.c +++ /dev/null @@ -1,350 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_ioreq.c - * @author MCD Application Team - * @brief This file handles the issuing of the USB transactions - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_ioreq.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_IOREQ - * @brief This file handles the standard protocol processing (USB v2.0) - * @{ - */ - - -/** @defgroup USBH_IOREQ_Private_Defines - * @{ - */ - -/** - * @} - */ - - -/** @defgroup USBH_IOREQ_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - - -/** @defgroup USBH_IOREQ_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_IOREQ_Private_Variables - * @{ - */ -/** - * @} - */ -/** @defgroup USBH_IOREQ_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - - -/** @defgroup USBH_IOREQ_Private_Functions - * @{ - */ - - - -/** - * @brief USBH_CtlSendSetup - * Sends the Setup Packet to the Device - * @param phost: Host Handle - * @param buff: Buffer pointer from which the Data will be send to Device - * @param pipe_num: Pipe Number - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_CtlSendSetup(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint8_t pipe_num) -{ - - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 0U, /* Direction : OUT */ - USBH_EP_CONTROL, /* EP type */ - USBH_PID_SETUP, /* Type setup */ - buff, /* data buffer */ - USBH_SETUP_PKT_SIZE, /* data length */ - 0U); - return USBH_OK; -} - - -/** - * @brief USBH_CtlSendData - * Sends a data Packet to the Device - * @param phost: Host Handle - * @param buff: Buffer pointer from which the Data will be sent to Device - * @param length: Length of the data to be sent - * @param pipe_num: Pipe Number - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_CtlSendData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint16_t length, - uint8_t pipe_num, - uint8_t do_ping) -{ - if (phost->device.speed != USBH_SPEED_HIGH) - { - do_ping = 0U; - } - - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 0U, /* Direction : OUT */ - USBH_EP_CONTROL, /* EP type */ - USBH_PID_DATA, /* Type Data */ - buff, /* data buffer */ - length, /* data length */ - do_ping); /* do ping (HS Only)*/ - - return USBH_OK; -} - - -/** - * @brief USBH_CtlReceiveData - * Receives the Device Response to the Setup Packet - * @param phost: Host Handle - * @param buff: Buffer pointer in which the response needs to be copied - * @param length: Length of the data to be received - * @param pipe_num: Pipe Number - * @retval USBH Status. - */ -USBH_StatusTypeDef USBH_CtlReceiveData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint16_t length, - uint8_t pipe_num) -{ - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 1U, /* Direction : IN */ - USBH_EP_CONTROL, /* EP type */ - USBH_PID_DATA, /* Type Data */ - buff, /* data buffer */ - length, /* data length */ - 0U); - return USBH_OK; - -} - - -/** - * @brief USBH_BulkSendData - * Sends the Bulk Packet to the device - * @param phost: Host Handle - * @param buff: Buffer pointer from which the Data will be sent to Device - * @param length: Length of the data to be sent - * @param pipe_num: Pipe Number - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_BulkSendData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint16_t length, - uint8_t pipe_num, - uint8_t do_ping) -{ - if (phost->device.speed != USBH_SPEED_HIGH) - { - do_ping = 0U; - } - - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 0U, /* Direction : IN */ - USBH_EP_BULK, /* EP type */ - USBH_PID_DATA, /* Type Data */ - buff, /* data buffer */ - length, /* data length */ - do_ping); /* do ping (HS Only)*/ - return USBH_OK; -} - - -/** - * @brief USBH_BulkReceiveData - * Receives IN bulk packet from device - * @param phost: Host Handle - * @param buff: Buffer pointer in which the received data packet to be copied - * @param length: Length of the data to be received - * @param pipe_num: Pipe Number - * @retval USBH Status. - */ -USBH_StatusTypeDef USBH_BulkReceiveData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint16_t length, - uint8_t pipe_num) -{ - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 1U, /* Direction : IN */ - USBH_EP_BULK, /* EP type */ - USBH_PID_DATA, /* Type Data */ - buff, /* data buffer */ - length, /* data length */ - 0U); - return USBH_OK; -} - - -/** - * @brief USBH_InterruptReceiveData - * Receives the Device Response to the Interrupt IN token - * @param phost: Host Handle - * @param buff: Buffer pointer in which the response needs to be copied - * @param length: Length of the data to be received - * @param pipe_num: Pipe Number - * @retval USBH Status. - */ -USBH_StatusTypeDef USBH_InterruptReceiveData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint8_t length, - uint8_t pipe_num) -{ - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 1U, /* Direction : IN */ - USBH_EP_INTERRUPT, /* EP type */ - USBH_PID_DATA, /* Type Data */ - buff, /* data buffer */ - (uint16_t)length, /* data length */ - 0U); - - return USBH_OK; -} - -/** - * @brief USBH_InterruptSendData - * Sends the data on Interrupt OUT Endpoint - * @param phost: Host Handle - * @param buff: Buffer pointer from where the data needs to be copied - * @param length: Length of the data to be sent - * @param pipe_num: Pipe Number - * @retval USBH Status. - */ -USBH_StatusTypeDef USBH_InterruptSendData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint8_t length, - uint8_t pipe_num) -{ - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 0U, /* Direction : OUT */ - USBH_EP_INTERRUPT, /* EP type */ - USBH_PID_DATA, /* Type Data */ - buff, /* data buffer */ - (uint16_t)length, /* data length */ - 0U); - - return USBH_OK; -} - -/** - * @brief USBH_IsocReceiveData - * Receives the Device Response to the Isochronous IN token - * @param phost: Host Handle - * @param buff: Buffer pointer in which the response needs to be copied - * @param length: Length of the data to be received - * @param pipe_num: Pipe Number - * @retval USBH Status. - */ -USBH_StatusTypeDef USBH_IsocReceiveData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint32_t length, - uint8_t pipe_num) -{ - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 1U, /* Direction : IN */ - USBH_EP_ISO, /* EP type */ - USBH_PID_DATA, /* Type Data */ - buff, /* data buffer */ - (uint16_t)length, /* data length */ - 0U); - - - return USBH_OK; -} - -/** - * @brief USBH_IsocSendData - * Sends the data on Isochronous OUT Endpoint - * @param phost: Host Handle - * @param buff: Buffer pointer from where the data needs to be copied - * @param length: Length of the data to be sent - * @param pipe_num: Pipe Number - * @retval USBH Status. - */ -USBH_StatusTypeDef USBH_IsocSendData(USBH_HandleTypeDef *phost, - uint8_t *buff, - uint32_t length, - uint8_t pipe_num) -{ - (void)USBH_LL_SubmitURB(phost, /* Driver handle */ - pipe_num, /* Pipe index */ - 0U, /* Direction : OUT */ - USBH_EP_ISO, /* EP type */ - USBH_PID_DATA, /* Type Data */ - buff, /* data buffer */ - (uint16_t)length, /* data length */ - 0U); - - return USBH_OK; -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - - diff --git a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_pipes.c b/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_pipes.c deleted file mode 100644 index 0ad392d..0000000 --- a/workspace/stm32f407_default/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_pipes.c +++ /dev/null @@ -1,188 +0,0 @@ -/** - ****************************************************************************** - * @file usbh_pipes.c - * @author MCD Application Team - * @brief This file implements functions for opening and closing Pipes - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2015 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_pipes.h" - -/** @addtogroup USBH_LIB - * @{ - */ - -/** @addtogroup USBH_LIB_CORE - * @{ - */ - -/** @defgroup USBH_PIPES - * @brief This file includes opening and closing Pipes - * @{ - */ - -/** @defgroup USBH_PIPES_Private_Defines - * @{ - */ -/** - * @} - */ - -/** @defgroup USBH_PIPES_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_PIPES_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBH_PIPES_Private_Variables - * @{ - */ - -/** - * @} - */ - - -/** @defgroup USBH_PIPES_Private_Functions - * @{ - */ -static uint16_t USBH_GetFreePipe(USBH_HandleTypeDef *phost); - - -/** - * @brief USBH_Open_Pipe - * Open a pipe - * @param phost: Host Handle - * @param pipe_num: Pipe Number - * @param dev_address: USB Device address allocated to attached device - * @param speed : USB device speed (Full/Low) - * @param ep_type: end point type (Bulk/int/ctl) - * @param mps: max pkt size - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_OpenPipe(USBH_HandleTypeDef *phost, uint8_t pipe_num, - uint8_t epnum, uint8_t dev_address, - uint8_t speed, uint8_t ep_type, uint16_t mps) -{ - (void)USBH_LL_OpenPipe(phost, pipe_num, epnum, dev_address, speed, ep_type, mps); - - return USBH_OK; -} - - -/** - * @brief USBH_ClosePipe - * Close a pipe - * @param phost: Host Handle - * @param pipe_num: Pipe Number - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_ClosePipe(USBH_HandleTypeDef *phost, uint8_t pipe_num) -{ - (void)USBH_LL_ClosePipe(phost, pipe_num); - - return USBH_OK; -} - - -/** - * @brief USBH_Alloc_Pipe - * Allocate a new Pipe - * @param phost: Host Handle - * @param ep_addr: End point for which the Pipe to be allocated - * @retval Pipe number - */ -uint8_t USBH_AllocPipe(USBH_HandleTypeDef *phost, uint8_t ep_addr) -{ - uint16_t pipe; - - pipe = USBH_GetFreePipe(phost); - - if (pipe != 0xFFFFU) - { - phost->Pipes[pipe & 0xFU] = (uint32_t)(0x8000U | ep_addr); - } - - return (uint8_t)pipe; -} - - -/** - * @brief USBH_Free_Pipe - * Free the USB Pipe - * @param phost: Host Handle - * @param idx: Pipe number to be freed - * @retval USBH Status - */ -USBH_StatusTypeDef USBH_FreePipe(USBH_HandleTypeDef *phost, uint8_t idx) -{ - if (idx < USBH_MAX_PIPES_NBR) - { - phost->Pipes[idx] &= 0x7FFFU; - } - - return USBH_OK; -} - - -/** - * @brief USBH_GetFreePipe - * @param phost: Host Handle - * Get a free Pipe number for allocation to a device endpoint - * @retval idx: Free Pipe number - */ -static uint16_t USBH_GetFreePipe(USBH_HandleTypeDef *phost) -{ - uint8_t idx = 0U; - - for (idx = 0U ; idx < USBH_MAX_PIPES_NBR ; idx++) - { - if ((phost->Pipes[idx] & 0x8000U) == 0U) - { - return (uint16_t)idx; - } - } - - return 0xFFFFU; -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - diff --git a/workspace/stm32f407_default/USB_HOST/App/usb_host.c b/workspace/stm32f407_default/USB_HOST/App/usb_host.c deleted file mode 100644 index 1cb390f..0000000 --- a/workspace/stm32f407_default/USB_HOST/App/usb_host.c +++ /dev/null @@ -1,136 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : usb_host.c - * @version : v1.0_Cube - * @brief : This file implements the USB Host - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ - -#include "usb_host.h" -#include "usbh_core.h" -#include "usbh_cdc.h" - -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* USER CODE BEGIN PV */ -/* Private variables ---------------------------------------------------------*/ - -/* USER CODE END PV */ - -/* USER CODE BEGIN PFP */ -/* Private function prototypes -----------------------------------------------*/ - -/* USER CODE END PFP */ - -/* USB Host core handle declaration */ -USBH_HandleTypeDef hUsbHostFS; -ApplicationTypeDef Appli_state = APPLICATION_IDLE; - -/* - * -- Insert your variables declaration here -- - */ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/* - * user callback declaration - */ -static void USBH_UserProcess(USBH_HandleTypeDef *phost, uint8_t id); - -/* - * -- Insert your external function declaration here -- - */ -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ - -/** - * Init USB host library, add supported class and start the library - * @retval None - */ -void MX_USB_HOST_Init(void) -{ - /* USER CODE BEGIN USB_HOST_Init_PreTreatment */ - - /* USER CODE END USB_HOST_Init_PreTreatment */ - - /* Init host Library, add supported class and start the library. */ - if (USBH_Init(&hUsbHostFS, USBH_UserProcess, HOST_FS) != USBH_OK) - { - Error_Handler(); - } - if (USBH_RegisterClass(&hUsbHostFS, USBH_CDC_CLASS) != USBH_OK) - { - Error_Handler(); - } - if (USBH_Start(&hUsbHostFS) != USBH_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN USB_HOST_Init_PostTreatment */ - - /* USER CODE END USB_HOST_Init_PostTreatment */ -} - -/* - * Background task - */ -void MX_USB_HOST_Process(void) -{ - /* USB Host Background task */ - USBH_Process(&hUsbHostFS); -} -/* - * user callback definition - */ -static void USBH_UserProcess (USBH_HandleTypeDef *phost, uint8_t id) -{ - /* USER CODE BEGIN CALL_BACK_1 */ - switch(id) - { - case HOST_USER_SELECT_CONFIGURATION: - break; - - case HOST_USER_DISCONNECTION: - Appli_state = APPLICATION_DISCONNECT; - break; - - case HOST_USER_CLASS_ACTIVE: - Appli_state = APPLICATION_READY; - break; - - case HOST_USER_CONNECTION: - Appli_state = APPLICATION_START; - break; - - default: - break; - } - /* USER CODE END CALL_BACK_1 */ -} - -/** - * @} - */ - -/** - * @} - */ - diff --git a/workspace/stm32f407_default/USB_HOST/App/usb_host.h b/workspace/stm32f407_default/USB_HOST/App/usb_host.h deleted file mode 100644 index 2eca9e1..0000000 --- a/workspace/stm32f407_default/USB_HOST/App/usb_host.h +++ /dev/null @@ -1,92 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : usb_host.h - * @version : v1.0_Cube - * @brief : Header for usb_host.c file. - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USB_HOST__H__ -#define __USB_HOST__H__ - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" -#include "stm32f4xx_hal.h" - -/* USER CODE BEGIN INCLUDE */ - -/* USER CODE END INCLUDE */ - -/** @addtogroup USBH_OTG_DRIVER - * @{ - */ - -/** @defgroup USBH_HOST USBH_HOST - * @brief Host file for Usb otg low level driver. - * @{ - */ - -/** @defgroup USBH_HOST_Exported_Variables USBH_HOST_Exported_Variables - * @brief Public variables. - * @{ - */ - -/** - * @} - */ - -/** Status of the application. */ -typedef enum { - APPLICATION_IDLE = 0, - APPLICATION_START, - APPLICATION_READY, - APPLICATION_DISCONNECT -}ApplicationTypeDef; - -/** @defgroup USBH_HOST_Exported_FunctionsPrototype USBH_HOST_Exported_FunctionsPrototype - * @brief Declaration of public functions for Usb host. - * @{ - */ - -/* Exported functions -------------------------------------------------------*/ - -/** @brief USB Host initialization function. */ -void MX_USB_HOST_Init(void); - -void MX_USB_HOST_Process(void); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USB_HOST__H__ */ - diff --git a/workspace/stm32f407_default/USB_HOST/Target/usbh_conf.c b/workspace/stm32f407_default/USB_HOST/Target/usbh_conf.c deleted file mode 100644 index 86b9eae..0000000 --- a/workspace/stm32f407_default/USB_HOST/Target/usbh_conf.c +++ /dev/null @@ -1,548 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : Target/usbh_conf.c - * @version : v1.0_Cube - * @brief : This file implements the board support package for the USB host library - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_core.h" -#include "usbh_platform.h" - -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ - -/* USER CODE BEGIN PV */ -/* Private variables ---------------------------------------------------------*/ - -/* USER CODE END PV */ - -HCD_HandleTypeDef hhcd_USB_OTG_FS; -void Error_Handler(void); - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/* USER CODE BEGIN PFP */ -/* Private function prototypes -----------------------------------------------*/ -USBH_StatusTypeDef USBH_Get_USB_Status(HAL_StatusTypeDef hal_status); - -/* USER CODE END PFP */ - -/* Private functions ---------------------------------------------------------*/ - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ - -/******************************************************************************* - LL Driver Callbacks (HCD -> USB Host Library) -*******************************************************************************/ -/* MSP Init */ - -void HAL_HCD_MspInit(HCD_HandleTypeDef* hcdHandle) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(hcdHandle->Instance==USB_OTG_FS) - { - /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */ - - /* USER CODE END USB_OTG_FS_MspInit 0 */ - - __HAL_RCC_GPIOA_CLK_ENABLE(); - /**USB_OTG_FS GPIO Configuration - PA9 ------> USB_OTG_FS_VBUS - PA10 ------> USB_OTG_FS_ID - PA11 ------> USB_OTG_FS_DM - PA12 ------> USB_OTG_FS_DP - */ - GPIO_InitStruct.Pin = VBUS_FS_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(VBUS_FS_GPIO_Port, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = OTG_FS_ID_Pin|OTG_FS_DM_Pin|OTG_FS_DP_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Peripheral clock enable */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - /* Peripheral interrupt init */ - HAL_NVIC_SetPriority(OTG_FS_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(OTG_FS_IRQn); - /* USER CODE BEGIN USB_OTG_FS_MspInit 1 */ - - /* USER CODE END USB_OTG_FS_MspInit 1 */ - } -} - -void HAL_HCD_MspDeInit(HCD_HandleTypeDef* hcdHandle) -{ - if(hcdHandle->Instance==USB_OTG_FS) - { - /* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */ - - /* USER CODE END USB_OTG_FS_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_USB_OTG_FS_CLK_DISABLE(); - - /**USB_OTG_FS GPIO Configuration - PA9 ------> USB_OTG_FS_VBUS - PA10 ------> USB_OTG_FS_ID - PA11 ------> USB_OTG_FS_DM - PA12 ------> USB_OTG_FS_DP - */ - HAL_GPIO_DeInit(GPIOA, VBUS_FS_Pin|OTG_FS_ID_Pin|OTG_FS_DM_Pin|OTG_FS_DP_Pin); - - /* Peripheral interrupt Deinit*/ - HAL_NVIC_DisableIRQ(OTG_FS_IRQn); - - /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */ - - /* USER CODE END USB_OTG_FS_MspDeInit 1 */ - } -} - -/** - * @brief SOF callback. - * @param hhcd: HCD handle - * @retval None - */ -void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd) -{ - USBH_LL_IncTimer(hhcd->pData); -} - -/** - * @brief SOF callback. - * @param hhcd: HCD handle - * @retval None - */ -void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd) -{ - USBH_LL_Connect(hhcd->pData); -} - -/** - * @brief SOF callback. - * @param hhcd: HCD handle - * @retval None - */ -void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd) -{ - USBH_LL_Disconnect(hhcd->pData); -} - -/** - * @brief Notify URB state change callback. - * @param hhcd: HCD handle - * @param chnum: channel number - * @param urb_state: state - * @retval None - */ -void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state) -{ - /* To be used with OS to sync URB state with the global state machine */ -#if (USBH_USE_OS == 1) - USBH_LL_NotifyURBChange(hhcd->pData); -#endif -} -/** -* @brief Port Port Enabled callback. - * @param hhcd: HCD handle - * @retval None - */ -void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd) -{ - USBH_LL_PortEnabled(hhcd->pData); -} - -/** - * @brief Port Port Disabled callback. - * @param hhcd: HCD handle - * @retval None - */ -void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd) -{ - USBH_LL_PortDisabled(hhcd->pData); -} - -/******************************************************************************* - LL Driver Interface (USB Host Library --> HCD) -*******************************************************************************/ - -/** - * @brief Initialize the low level portion of the host driver. - * @param phost: Host handle - * @retval USBH status - */ -USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost) -{ - /* Init USB_IP */ - if (phost->id == HOST_FS) { - /* Link the driver to the stack. */ - hhcd_USB_OTG_FS.pData = phost; - phost->pData = &hhcd_USB_OTG_FS; - - hhcd_USB_OTG_FS.Instance = USB_OTG_FS; - hhcd_USB_OTG_FS.Init.Host_channels = 8; - hhcd_USB_OTG_FS.Init.speed = HCD_SPEED_FULL; - hhcd_USB_OTG_FS.Init.dma_enable = DISABLE; - hhcd_USB_OTG_FS.Init.phy_itface = HCD_PHY_EMBEDDED; - hhcd_USB_OTG_FS.Init.Sof_enable = DISABLE; - if (HAL_HCD_Init(&hhcd_USB_OTG_FS) != HAL_OK) - { - Error_Handler( ); - } - - USBH_LL_SetTimer(phost, HAL_HCD_GetCurrentFrame(&hhcd_USB_OTG_FS)); - } - return USBH_OK; -} - -/** - * @brief De-Initialize the low level portion of the host driver. - * @param phost: Host handle - * @retval USBH status - */ -USBH_StatusTypeDef USBH_LL_DeInit(USBH_HandleTypeDef *phost) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBH_StatusTypeDef usb_status = USBH_OK; - - hal_status = HAL_HCD_DeInit(phost->pData); - - usb_status = USBH_Get_USB_Status(hal_status); - - return usb_status; -} - -/** - * @brief Start the low level portion of the host driver. - * @param phost: Host handle - * @retval USBH status - */ -USBH_StatusTypeDef USBH_LL_Start(USBH_HandleTypeDef *phost) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBH_StatusTypeDef usb_status = USBH_OK; - - hal_status = HAL_HCD_Start(phost->pData); - - usb_status = USBH_Get_USB_Status(hal_status); - - return usb_status; -} - -/** - * @brief Stop the low level portion of the host driver. - * @param phost: Host handle - * @retval USBH status - */ -USBH_StatusTypeDef USBH_LL_Stop(USBH_HandleTypeDef *phost) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBH_StatusTypeDef usb_status = USBH_OK; - - hal_status = HAL_HCD_Stop(phost->pData); - - usb_status = USBH_Get_USB_Status(hal_status); - - return usb_status; -} - -/** - * @brief Return the USB host speed from the low level driver. - * @param phost: Host handle - * @retval USBH speeds - */ -USBH_SpeedTypeDef USBH_LL_GetSpeed(USBH_HandleTypeDef *phost) -{ - USBH_SpeedTypeDef speed = USBH_SPEED_FULL; - - switch (HAL_HCD_GetCurrentSpeed(phost->pData)) - { - case 0 : - speed = USBH_SPEED_HIGH; - break; - - case 1 : - speed = USBH_SPEED_FULL; - break; - - case 2 : - speed = USBH_SPEED_LOW; - break; - - default: - speed = USBH_SPEED_FULL; - break; - } - return speed; -} - -/** - * @brief Reset the Host port of the low level driver. - * @param phost: Host handle - * @retval USBH status - */ -USBH_StatusTypeDef USBH_LL_ResetPort(USBH_HandleTypeDef *phost) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBH_StatusTypeDef usb_status = USBH_OK; - - hal_status = HAL_HCD_ResetPort(phost->pData); - - usb_status = USBH_Get_USB_Status(hal_status); - - return usb_status; -} - -/** - * @brief Return the last transferred packet size. - * @param phost: Host handle - * @param pipe: Pipe index - * @retval Packet size - */ -uint32_t USBH_LL_GetLastXferSize(USBH_HandleTypeDef *phost, uint8_t pipe) -{ - return HAL_HCD_HC_GetXferCount(phost->pData, pipe); -} - -/** - * @brief Open a pipe of the low level driver. - * @param phost: Host handle - * @param pipe_num: Pipe index - * @param epnum: Endpoint number - * @param dev_address: Device USB address - * @param speed: Device Speed - * @param ep_type: Endpoint type - * @param mps: Endpoint max packet size - * @retval USBH status - */ -USBH_StatusTypeDef USBH_LL_OpenPipe(USBH_HandleTypeDef *phost, uint8_t pipe_num, uint8_t epnum, - uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBH_StatusTypeDef usb_status = USBH_OK; - - hal_status = HAL_HCD_HC_Init(phost->pData, pipe_num, epnum, - dev_address, speed, ep_type, mps); - - usb_status = USBH_Get_USB_Status(hal_status); - - return usb_status; -} - -/** - * @brief Close a pipe of the low level driver. - * @param phost: Host handle - * @param pipe: Pipe index - * @retval USBH status - */ -USBH_StatusTypeDef USBH_LL_ClosePipe(USBH_HandleTypeDef *phost, uint8_t pipe) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBH_StatusTypeDef usb_status = USBH_OK; - - hal_status = HAL_HCD_HC_Halt(phost->pData, pipe); - - usb_status = USBH_Get_USB_Status(hal_status); - - return usb_status; -} - -/** - * @brief Submit a new URB to the low level driver. - * @param phost: Host handle - * @param pipe: Pipe index - * This parameter can be a value from 1 to 15 - * @param direction : Channel number - * This parameter can be one of the these values: - * 0 : Output - * 1 : Input - * @param ep_type : Endpoint Type - * This parameter can be one of the these values: - * @arg EP_TYPE_CTRL: Control type - * @arg EP_TYPE_ISOC: Isochrounous type - * @arg EP_TYPE_BULK: Bulk type - * @arg EP_TYPE_INTR: Interrupt type - * @param token : Endpoint Type - * This parameter can be one of the these values: - * @arg 0: PID_SETUP - * @arg 1: PID_DATA - * @param pbuff : pointer to URB data - * @param length : Length of URB data - * @param do_ping : activate do ping protocol (for high speed only) - * This parameter can be one of the these values: - * 0 : do ping inactive - * 1 : do ping active - * @retval Status - */ -USBH_StatusTypeDef USBH_LL_SubmitURB(USBH_HandleTypeDef *phost, uint8_t pipe, uint8_t direction, - uint8_t ep_type, uint8_t token, uint8_t *pbuff, uint16_t length, - uint8_t do_ping) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBH_StatusTypeDef usb_status = USBH_OK; - - hal_status = HAL_HCD_HC_SubmitRequest(phost->pData, pipe, direction , - ep_type, token, pbuff, length, - do_ping); - usb_status = USBH_Get_USB_Status(hal_status); - - return usb_status; -} - -/** - * @brief Get a URB state from the low level driver. - * @param phost: Host handle - * @param pipe: Pipe index - * This parameter can be a value from 1 to 15 - * @retval URB state - * This parameter can be one of the these values: - * @arg URB_IDLE - * @arg URB_DONE - * @arg URB_NOTREADY - * @arg URB_NYET - * @arg URB_ERROR - * @arg URB_STALL - */ -USBH_URBStateTypeDef USBH_LL_GetURBState(USBH_HandleTypeDef *phost, uint8_t pipe) -{ - return (USBH_URBStateTypeDef)HAL_HCD_HC_GetURBState (phost->pData, pipe); -} - -/** - * @brief Drive VBUS. - * @param phost: Host handle - * @param state : VBUS state - * This parameter can be one of the these values: - * 0 : VBUS Inactive - * 1 : VBUS Active - * @retval Status - */ -USBH_StatusTypeDef USBH_LL_DriverVBUS(USBH_HandleTypeDef *phost, uint8_t state) -{ - if (phost->id == HOST_FS) { - MX_DriverVbusFS(state); - } - - /* USER CODE BEGIN 0 */ - - /* USER CODE END 0*/ - - HAL_Delay(200); - return USBH_OK; -} - -/** - * @brief Set toggle for a pipe. - * @param phost: Host handle - * @param pipe: Pipe index - * @param toggle: toggle (0/1) - * @retval Status - */ -USBH_StatusTypeDef USBH_LL_SetToggle(USBH_HandleTypeDef *phost, uint8_t pipe, uint8_t toggle) -{ - HCD_HandleTypeDef *pHandle; - pHandle = phost->pData; - - if(pHandle->hc[pipe].ep_is_in) - { - pHandle->hc[pipe].toggle_in = toggle; - } - else - { - pHandle->hc[pipe].toggle_out = toggle; - } - - return USBH_OK; -} - -/** - * @brief Return the current toggle of a pipe. - * @param phost: Host handle - * @param pipe: Pipe index - * @retval toggle (0/1) - */ -uint8_t USBH_LL_GetToggle(USBH_HandleTypeDef *phost, uint8_t pipe) -{ - uint8_t toggle = 0; - HCD_HandleTypeDef *pHandle; - pHandle = phost->pData; - - if(pHandle->hc[pipe].ep_is_in) - { - toggle = pHandle->hc[pipe].toggle_in; - } - else - { - toggle = pHandle->hc[pipe].toggle_out; - } - return toggle; -} - -/** - * @brief Delay routine for the USB Host Library - * @param Delay: Delay in ms - * @retval None - */ -void USBH_Delay(uint32_t Delay) -{ - HAL_Delay(Delay); -} - -/** - * @brief Returns the USB status depending on the HAL status: - * @param hal_status: HAL status - * @retval USB status - */ -USBH_StatusTypeDef USBH_Get_USB_Status(HAL_StatusTypeDef hal_status) -{ - USBH_StatusTypeDef usb_status = USBH_OK; - - switch (hal_status) - { - case HAL_OK : - usb_status = USBH_OK; - break; - case HAL_ERROR : - usb_status = USBH_FAIL; - break; - case HAL_BUSY : - usb_status = USBH_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBH_FAIL; - break; - default : - usb_status = USBH_FAIL; - break; - } - return usb_status; -} - diff --git a/workspace/stm32f407_default/USB_HOST/Target/usbh_conf.h b/workspace/stm32f407_default/USB_HOST/Target/usbh_conf.h deleted file mode 100644 index 2189b5a..0000000 --- a/workspace/stm32f407_default/USB_HOST/Target/usbh_conf.h +++ /dev/null @@ -1,194 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : Target/usbh_conf.h - * @version : v1.0_Cube - * @brief : Header for usbh_conf.c file. - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBH_CONF__H__ -#define __USBH_CONF__H__ -#ifdef __cplusplus - extern "C" { -#endif -/* Includes ------------------------------------------------------------------*/ - -#include -#include -#include -#include "main.h" - -#include "stm32f4xx.h" -#include "stm32f4xx_hal.h" - -/* USER CODE BEGIN INCLUDE */ - -/* USER CODE END INCLUDE */ - -/** @addtogroup STM32_USB_HOST_LIBRARY - * @{ - */ - -/** @defgroup USBH_CONF - * @brief usb host low level driver configuration file - * @{ - */ - -/** @defgroup USBH_CONF_Exported_Variables USBH_CONF_Exported_Variables - * @brief Public variables. - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBH_CONF_Exported_Defines USBH_CONF_Exported_Defines - * @brief Defines for configuration of the Usb host. - * @{ - */ - -/*---------- -----------*/ -#define USBH_MAX_NUM_ENDPOINTS 2U - -/*---------- -----------*/ -#define USBH_MAX_NUM_INTERFACES 2U - -/*---------- -----------*/ -#define USBH_MAX_NUM_CONFIGURATION 1U - -/*---------- -----------*/ -#define USBH_KEEP_CFG_DESCRIPTOR 1U - -/*---------- -----------*/ -#define USBH_MAX_NUM_SUPPORTED_CLASS 1U - -/*---------- -----------*/ -#define USBH_MAX_SIZE_CONFIGURATION 256U - -/*---------- -----------*/ -#define USBH_MAX_DATA_BUFFER 512U - -/*---------- -----------*/ -#define USBH_DEBUG_LEVEL 0U - -/*---------- -----------*/ -#define USBH_USE_OS 0U - -/****************************************/ -/* #define for FS and HS identification */ -#define HOST_HS 0 -#define HOST_FS 1 - -#if (USBH_USE_OS == 1) - #include "cmsis_os.h" - #define USBH_PROCESS_PRIO osPriorityNormal - #define USBH_PROCESS_STACK_SIZE ((uint16_t)0) -#endif /* (USBH_USE_OS == 1) */ - -/** - * @} - */ - -/** @defgroup USBH_CONF_Exported_Macros USBH_CONF_Exported_Macros - * @brief Aliases. - * @{ - */ - -/* Memory management macros */ - -/** Alias for memory allocation. */ -#define USBH_malloc malloc - -/** Alias for memory release. */ -#define USBH_free free - -/** Alias for memory set. */ -#define USBH_memset memset - -/** Alias for memory copy. */ -#define USBH_memcpy memcpy - -/* DEBUG macros */ - -#if (USBH_DEBUG_LEVEL > 0U) -#define USBH_UsrLog(...) do { \ - printf(__VA_ARGS__); \ - printf("\n"); \ -} while (0) -#else -#define USBH_UsrLog(...) do {} while (0) -#endif - -#if (USBH_DEBUG_LEVEL > 1U) - -#define USBH_ErrLog(...) do { \ - printf("ERROR: "); \ - printf(__VA_ARGS__); \ - printf("\n"); \ -} while (0) -#else -#define USBH_ErrLog(...) do {} while (0) -#endif - -#if (USBH_DEBUG_LEVEL > 2U) -#define USBH_DbgLog(...) do { \ - printf("DEBUG : "); \ - printf(__VA_ARGS__); \ - printf("\n"); \ -} while (0) -#else -#define USBH_DbgLog(...) do {} while (0) -#endif - -/** - * @} - */ - -/** @defgroup USBH_CONF_Exported_Types USBH_CONF_Exported_Types - * @brief Types. - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBH_CONF_Exported_FunctionsPrototype USBH_CONF_Exported_FunctionsPrototype - * @brief Declaration of public functions for Usb host. - * @{ - */ - -/* Exported functions -------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USBH_CONF__H__ */ - diff --git a/workspace/stm32f407_default/USB_HOST/Target/usbh_platform.c b/workspace/stm32f407_default/USB_HOST/Target/usbh_platform.c deleted file mode 100644 index 0c12f30..0000000 --- a/workspace/stm32f407_default/USB_HOST/Target/usbh_platform.c +++ /dev/null @@ -1,52 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : usbh_platform.c - - * @brief : This file implements the USB platform - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbh_platform.h" - -/* USER CODE BEGIN INCLUDE */ - -/* USER CODE END INCLUDE */ - -/** - * @brief Drive VBUS. - * @param state : VBUS state - * This parameter can be one of the these values: - * - 1 : VBUS Active - * - 0 : VBUS Inactive - */ -void MX_DriverVbusFS(uint8_t state) -{ - uint8_t data = state; - /* USER CODE BEGIN PREPARE_GPIO_DATA_VBUS_FS */ - if(state == 0) - { - /* Drive high Charge pump */ - data = GPIO_PIN_RESET; - } - else - { - /* Drive low Charge pump */ - data = GPIO_PIN_SET; - } - /* USER CODE END PREPARE_GPIO_DATA_VBUS_FS */ - HAL_GPIO_WritePin(GPIOC,GPIO_PIN_0,(GPIO_PinState)data); -} - diff --git a/workspace/stm32f407_default/USB_HOST/Target/usbh_platform.h b/workspace/stm32f407_default/USB_HOST/Target/usbh_platform.h deleted file mode 100644 index 214d6c0..0000000 --- a/workspace/stm32f407_default/USB_HOST/Target/usbh_platform.h +++ /dev/null @@ -1,42 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : usbh_platform.h - * @brief : Header for usbh_platform.c file. - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBH_PLATFORM_H__ -#define __USBH_PLATFORM_H__ - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usb_host.h" - -/* USER CODE BEGIN INCLUDE */ - -/* USER CODE END INCLUDE */ - -void MX_DriverVbusFS(uint8_t state); - -#ifdef __cplusplus -} -#endif - -#endif /* __USBH_PLATFORM_H__ */ - diff --git a/workspace/stm32f407_default/stm32f407_default.ioc b/workspace/stm32f407_default/stm32f407_default.ioc deleted file mode 100644 index 568a85d..0000000 --- a/workspace/stm32f407_default/stm32f407_default.ioc +++ /dev/null @@ -1,396 +0,0 @@ -#MicroXplorer Configuration settings - do not modify -CAD.formats= -CAD.pinconfig= -CAD.provider= -File.Version=6 -I2S3.AudioFreq-Half_Duplex_Master=I2S_AUDIOFREQ_96K -I2S3.ErrorAudioFreq=-2.34 % -I2S3.ErrorAudioFreq-Half_Duplex_Master=0.8 % -I2S3.FullDuplexMode=I2S_FULLDUPLEXMODE_DISABLE -I2S3.IPParameters=AudioFreq-Half_Duplex_Master,ErrorAudioFreq-Half_Duplex_Master,RealAudioFreq-Half_Duplex_Master,RealAudioFreq,ErrorAudioFreq,Instance,VirtualMode,FullDuplexMode -I2S3.Instance=SPI$Index -I2S3.RealAudioFreq=93.75 KHz -I2S3.RealAudioFreq-Half_Duplex_Master=96.774 KHz -I2S3.VirtualMode=I2S_MODE_MASTER -KeepUserPlacement=false -Mcu.CPN=STM32F407VGT6 -Mcu.Family=STM32F4 -Mcu.IP0=I2C1 -Mcu.IP1=I2S3 -Mcu.IP2=NVIC -Mcu.IP3=RCC -Mcu.IP4=SPI1 -Mcu.IP5=SYS -Mcu.IP6=USB_HOST -Mcu.IP7=USB_OTG_FS -Mcu.IPNb=8 -Mcu.Name=STM32F407V(E-G)Tx -Mcu.Package=LQFP100 -Mcu.Pin0=PE3 -Mcu.Pin1=PC14-OSC32_IN -Mcu.Pin10=PA6 -Mcu.Pin11=PA7 -Mcu.Pin12=PB2 -Mcu.Pin13=PB10 -Mcu.Pin14=PD12 -Mcu.Pin15=PD13 -Mcu.Pin16=PD14 -Mcu.Pin17=PD15 -Mcu.Pin18=PC7 -Mcu.Pin19=PA9 -Mcu.Pin2=PC15-OSC32_OUT -Mcu.Pin20=PA10 -Mcu.Pin21=PA11 -Mcu.Pin22=PA12 -Mcu.Pin23=PA13 -Mcu.Pin24=PA14 -Mcu.Pin25=PC10 -Mcu.Pin26=PC12 -Mcu.Pin27=PD4 -Mcu.Pin28=PD5 -Mcu.Pin29=PB3 -Mcu.Pin3=PH0-OSC_IN -Mcu.Pin30=PB6 -Mcu.Pin31=PB9 -Mcu.Pin32=PE1 -Mcu.Pin33=VP_SYS_VS_Systick -Mcu.Pin34=VP_USB_HOST_VS_USB_HOST_CDC_FS -Mcu.Pin4=PH1-OSC_OUT -Mcu.Pin5=PC0 -Mcu.Pin6=PC3 -Mcu.Pin7=PA0-WKUP -Mcu.Pin8=PA4 -Mcu.Pin9=PA5 -Mcu.PinsNb=35 -Mcu.ThirdPartyNb=0 -Mcu.UserConstants= -Mcu.UserName=STM32F407VGTx -MxCube.Version=6.8.0 -MxDb.Version=DB.6.0.80 -NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false -NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false -NVIC.ForceEnableDMAVector=true -NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false -NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false -NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false -NVIC.OTG_FS_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true -NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false -NVIC.PriorityGroup=NVIC_PRIORITYGROUP_0 -NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false -NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:false -NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false -PA0-WKUP.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI -PA0-WKUP.GPIO_Label=B1 [Blue PushButton] -PA0-WKUP.GPIO_ModeDefaultEXTI=GPIO_MODE_EVT_RISING -PA0-WKUP.GPIO_PuPd=GPIO_NOPULL -PA0-WKUP.Locked=true -PA0-WKUP.Signal=GPXTI0 -PA10.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PA10.GPIO_Label=OTG_FS_ID -PA10.GPIO_Mode=GPIO_MODE_AF_PP -PA10.GPIO_PuPd=GPIO_NOPULL -PA10.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PA10.Locked=true -PA10.Signal=USB_OTG_FS_ID -PA11.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PA11.GPIO_Label=OTG_FS_DM -PA11.GPIO_Mode=GPIO_MODE_AF_PP -PA11.GPIO_PuPd=GPIO_NOPULL -PA11.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PA11.Locked=true -PA11.Mode=Host_Only -PA11.Signal=USB_OTG_FS_DM -PA12.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PA12.GPIO_Label=OTG_FS_DP -PA12.GPIO_Mode=GPIO_MODE_AF_PP -PA12.GPIO_PuPd=GPIO_NOPULL -PA12.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PA12.Locked=true -PA12.Mode=Host_Only -PA12.Signal=USB_OTG_FS_DP -PA13.GPIOParameters=GPIO_Label -PA13.GPIO_Label=SWDIO -PA13.Locked=true -PA13.Mode=Serial_Wire -PA13.Signal=SYS_JTMS-SWDIO -PA14.GPIOParameters=GPIO_Label -PA14.GPIO_Label=SWCLK -PA14.Locked=true -PA14.Mode=Serial_Wire -PA14.Signal=SYS_JTCK-SWCLK -PA4.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PA4.GPIO_Label=I2S3_WS [CS43L22_LRCK] -PA4.GPIO_Mode=GPIO_MODE_AF_PP -PA4.GPIO_PuPd=GPIO_NOPULL -PA4.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PA4.Locked=true -PA4.Mode=Half_Duplex_Master -PA4.Signal=I2S3_WS -PA5.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PA5.GPIO_Label=SPI1_SCK [LIS302DL_SCL/SPC] -PA5.GPIO_Mode=GPIO_MODE_AF_PP -PA5.GPIO_PuPd=GPIO_NOPULL -PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PA5.Locked=true -PA5.Mode=Full_Duplex_Master -PA5.Signal=SPI1_SCK -PA6.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PA6.GPIO_Label=SPI1_MISO [LIS302DL_SDO] -PA6.GPIO_Mode=GPIO_MODE_AF_PP -PA6.GPIO_PuPd=GPIO_NOPULL -PA6.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PA6.Locked=true -PA6.Mode=Full_Duplex_Master -PA6.Signal=SPI1_MISO -PA7.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PA7.GPIO_Label=SPI1_MOSI [LIS302DL_SDA/SDI/SDO] -PA7.GPIO_Mode=GPIO_MODE_AF_PP -PA7.GPIO_PuPd=GPIO_NOPULL -PA7.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PA7.Locked=true -PA7.Mode=Full_Duplex_Master -PA7.Signal=SPI1_MOSI -PA9.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_Mode -PA9.GPIO_Label=VBUS_FS -PA9.GPIO_Mode=GPIO_MODE_INPUT -PA9.GPIO_PuPd=GPIO_NOPULL -PA9.Locked=true -PA9.Mode=Activate_VBUS -PA9.Signal=USB_OTG_FS_VBUS -PB10.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PB10.GPIO_Label=CLK_IN [MP45DT02_CLK] -PB10.GPIO_Mode=GPIO_MODE_AF_PP -PB10.GPIO_PuPd=GPIO_NOPULL -PB10.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PB10.Locked=true -PB10.Signal=I2S2_CK -PB2.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_Mode -PB2.GPIO_Label=BOOT1 -PB2.GPIO_Mode=GPIO_MODE_INPUT -PB2.GPIO_PuPd=GPIO_NOPULL -PB2.Locked=true -PB2.Signal=GPIO_Input -PB3.GPIOParameters=GPIO_Label -PB3.GPIO_Label=SWO -PB3.Locked=true -PB3.Signal=SYS_JTDO-SWO -PB6.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Pu,GPIO_Mode -PB6.GPIO_Label=Audio_SCL [CS43L22_SCL] -PB6.GPIO_Mode=GPIO_MODE_AF_OD -PB6.GPIO_Pu=GPIO_PULLUP -PB6.GPIO_PuPd=GPIO_NOPULL -PB6.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PB6.Locked=true -PB6.Mode=I2C -PB6.Signal=I2C1_SCL -PB9.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Pu,GPIO_Mode -PB9.GPIO_Label=Audio_SDA [CS43L22_SDA] -PB9.GPIO_Mode=GPIO_MODE_AF_OD -PB9.GPIO_Pu=GPIO_PULLUP -PB9.GPIO_PuPd=GPIO_NOPULL -PB9.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PB9.Locked=true -PB9.Mode=I2C -PB9.Signal=I2C1_SDA -PC0.GPIOParameters=GPIO_Speed,PinState,GPIO_PuPd,GPIO_Label -PC0.GPIO_Label=OTG_FS_PowerSwitchOn -PC0.GPIO_PuPd=GPIO_NOPULL -PC0.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PC0.Locked=true -PC0.PinState=GPIO_PIN_SET -PC0.Signal=GPIO_Output -PC10.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PC10.GPIO_Label=I2S3_SCK [CS43L22_SCLK] -PC10.GPIO_Mode=GPIO_MODE_AF_PP -PC10.GPIO_PuPd=GPIO_NOPULL -PC10.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PC10.Locked=true -PC10.Mode=Half_Duplex_Master -PC10.Signal=I2S3_CK -PC12.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PC12.GPIO_Label=I2S3_SD [CS43L22_SDIN] -PC12.GPIO_Mode=GPIO_MODE_AF_PP -PC12.GPIO_PuPd=GPIO_NOPULL -PC12.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PC12.Locked=true -PC12.Mode=Half_Duplex_Master -PC12.Signal=I2S3_SD -PC14-OSC32_IN.GPIOParameters=GPIO_Label -PC14-OSC32_IN.GPIO_Label=PC14-OSC32_IN -PC14-OSC32_IN.Locked=true -PC14-OSC32_IN.Mode=LSE-External-Oscillator -PC14-OSC32_IN.Signal=RCC_OSC32_IN -PC15-OSC32_OUT.GPIOParameters=GPIO_Label -PC15-OSC32_OUT.GPIO_Label=PC15-OSC32_OUT -PC15-OSC32_OUT.Locked=true -PC15-OSC32_OUT.Mode=LSE-External-Oscillator -PC15-OSC32_OUT.Signal=RCC_OSC32_OUT -PC3.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PC3.GPIO_Label=PDM_OUT [MP45DT02_DOUT] -PC3.GPIO_Mode=GPIO_MODE_AF_PP -PC3.GPIO_PuPd=GPIO_NOPULL -PC3.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PC3.Locked=true -PC3.Signal=I2S2_SD -PC7.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode -PC7.GPIO_Label=I2S3_MCK [CS43L22_MCLK] -PC7.GPIO_Mode=GPIO_MODE_AF_PP -PC7.GPIO_PuPd=GPIO_NOPULL -PC7.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PC7.Locked=true -PC7.Mode=Master_Clock_Activated -PC7.Signal=I2S3_MCK -PD12.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label -PD12.GPIO_Label=LD4 [Green Led] -PD12.GPIO_PuPd=GPIO_NOPULL -PD12.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PD12.Locked=true -PD12.Signal=GPIO_Output -PD13.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label -PD13.GPIO_Label=LD3 [Orange Led] -PD13.GPIO_PuPd=GPIO_NOPULL -PD13.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PD13.Locked=true -PD13.Signal=GPIO_Output -PD14.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label -PD14.GPIO_Label=LD5 [Red Led] -PD14.GPIO_PuPd=GPIO_NOPULL -PD14.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PD14.Locked=true -PD14.Signal=GPIO_Output -PD15.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label -PD15.GPIO_Label=LD6 [Blue Led] -PD15.GPIO_PuPd=GPIO_NOPULL -PD15.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PD15.Locked=true -PD15.Signal=GPIO_Output -PD4.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label -PD4.GPIO_Label=Audio_RST [CS43L22_RESET] -PD4.GPIO_PuPd=GPIO_NOPULL -PD4.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PD4.Locked=true -PD4.Signal=GPIO_Output -PD5.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_Mode -PD5.GPIO_Label=OTG_FS_OverCurrent -PD5.GPIO_Mode=GPIO_MODE_INPUT -PD5.GPIO_PuPd=GPIO_NOPULL -PD5.Locked=true -PD5.Signal=GPIO_Input -PE1.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI -PE1.GPIO_Label=MEMS_INT2 [LIS302DL_INT2] -PE1.GPIO_ModeDefaultEXTI=GPIO_MODE_EVT_RISING -PE1.GPIO_PuPd=GPIO_NOPULL -PE1.Locked=true -PE1.Signal=GPXTI1 -PE3.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label -PE3.GPIO_Label=CS_I2C/SPI [LIS302DL_CS_I2C/SPI] -PE3.GPIO_PuPd=GPIO_NOPULL -PE3.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PE3.Locked=true -PE3.Signal=GPIO_Output -PH0-OSC_IN.GPIOParameters=GPIO_Label -PH0-OSC_IN.GPIO_Label=PH0-OSC_IN -PH0-OSC_IN.Locked=true -PH0-OSC_IN.Mode=HSE-External-Oscillator -PH0-OSC_IN.Signal=RCC_OSC_IN -PH1-OSC_OUT.GPIOParameters=GPIO_Label -PH1-OSC_OUT.GPIO_Label=PH1-OSC_OUT -PH1-OSC_OUT.Locked=true -PH1-OSC_OUT.Mode=HSE-External-Oscillator -PH1-OSC_OUT.Signal=RCC_OSC_OUT -PinOutPanel.RotationAngle=0 -ProjectManager.AskForMigrate=true -ProjectManager.BackupPrevious=false -ProjectManager.CompilerOptimize=6 -ProjectManager.ComputerToolchain=false -ProjectManager.CoupleFile=false -ProjectManager.CustomerFirmwarePackage= -ProjectManager.DefaultFWLocation=true -ProjectManager.DeletePrevious=true -ProjectManager.DeviceId=STM32F407VGTx -ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.27.1 -ProjectManager.FreePins=false -ProjectManager.HalAssertFull=false -ProjectManager.HeapSize=0x200 -ProjectManager.KeepUserCode=true -ProjectManager.LastFirmware=true -ProjectManager.LibraryCopy=1 -ProjectManager.MainLocation=Core/Src -ProjectManager.NoMain=false -ProjectManager.PreviousToolchain=STM32CubeIDE -ProjectManager.ProjectBuild=false -ProjectManager.ProjectFileName=stm32f407_default.ioc -ProjectManager.ProjectName=stm32f407_default -ProjectManager.ProjectStructure= -ProjectManager.RegisterCallBack= -ProjectManager.StackSize=0x400 -ProjectManager.TargetToolchain=STM32CubeIDE -ProjectManager.ToolChainLocation= -ProjectManager.UnderRoot=true -ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-MX_I2S3_Init-I2S3-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_USB_HOST_Init-USB_HOST-false-HAL-false -RCC.48MHZClocksFreq_Value=48000000 -RCC.AHBFreq_Value=168000000 -RCC.APB1CLKDivider=RCC_HCLK_DIV4 -RCC.APB1Freq_Value=42000000 -RCC.APB1TimFreq_Value=84000000 -RCC.APB2CLKDivider=RCC_HCLK_DIV2 -RCC.APB2Freq_Value=84000000 -RCC.APB2TimFreq_Value=168000000 -RCC.CortexFreq_Value=168000000 -RCC.EthernetFreq_Value=168000000 -RCC.FCLKCortexFreq_Value=168000000 -RCC.FamilyName=M -RCC.HCLKFreq_Value=168000000 -RCC.HSE_VALUE=8000000 -RCC.HSI_VALUE=16000000 -RCC.I2SClocksFreq_Value=96000000 -RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S -RCC.LSI_VALUE=32000 -RCC.MCO2PinFreq_Value=168000000 -RCC.PLLCLKFreq_Value=168000000 -RCC.PLLM=8 -RCC.PLLN=336 -RCC.PLLQ=7 -RCC.PLLQCLKFreq_Value=48000000 -RCC.RTCFreq_Value=32000 -RCC.RTCHSEDivFreq_Value=4000000 -RCC.SYSCLKFreq_VALUE=168000000 -RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK -RCC.VCOI2SOutputFreq_Value=192000000 -RCC.VCOInputFreq_Value=1000000 -RCC.VCOOutputFreq_Value=336000000 -RCC.VcooutputI2S=96000000 -SH.GPXTI0.0=GPIO_EXTI0 -SH.GPXTI0.ConfNb=1 -SH.GPXTI1.0=GPIO_EXTI1 -SH.GPXTI1.ConfNb=1 -SPI1.BaudRatePrescaler-Full_Duplex_Master=SPI_BAUDRATEPRESCALER_2 -SPI1.CalculateBaudRate-Full_Duplex_Master=42.0 MBits/s -SPI1.Direction=SPI_DIRECTION_2LINES -SPI1.IPParameters=CalculateBaudRate-Full_Duplex_Master,BaudRatePrescaler-Full_Duplex_Master,Mode-Full_Duplex_Master,Mode,VirtualType,Direction -SPI1.Mode=SPI_MODE_MASTER -SPI1.Mode-Full_Duplex_Master=SPI_MODE_MASTER -SPI1.VirtualType=VM_MASTER -USB_HOST.BSP.number=1 -USB_HOST.IPParameters=VirtualModeFS,USBH_HandleTypeDef-CDC_FS -USB_HOST.USBH_HandleTypeDef-CDC_FS=hUsbHostFS -USB_HOST.VirtualModeFS=Cdc -USB_HOST0.BSP.STBoard=false -USB_HOST0.BSP.api=Unknown -USB_HOST0.BSP.component= -USB_HOST0.BSP.condition= -USB_HOST0.BSP.instance=PC0 -USB_HOST0.BSP.ip=GPIO -USB_HOST0.BSP.mode=Output -USB_HOST0.BSP.name=Drive_VBUS_FS -USB_HOST0.BSP.semaphore= -USB_HOST0.BSP.solution=PC0 -USB_OTG_FS.IPParameters=phy_itface,VirtualMode -USB_OTG_FS.VirtualMode=Host_Only -USB_OTG_FS.phy_itface=HCD_PHY_EMBEDDED -VP_SYS_VS_Systick.Mode=SysTick -VP_SYS_VS_Systick.Signal=SYS_VS_Systick -VP_USB_HOST_VS_USB_HOST_CDC_FS.Mode=CDC_FS -VP_USB_HOST_VS_USB_HOST_CDC_FS.Signal=USB_HOST_VS_USB_HOST_CDC_FS -board=STM32F407G-DISC1 -boardIOC=true