Update repo

README.md

@@ -46,13 +46,17 @@ Set the DIP switches as follows:
 Then connect the board to the PC using the USB port.
 
 <a href="url">
-  <img src="./images/SCIA_flashing1.png" width="800">
+  <img src="./images/SCIA_flashing1.png" width="600">
 </a>
 
 #### Step 2: Program the Firmware
 
 Open **C2Prog** and configure the settings as shown in the image below.
 
+<a href="url">
+  <img src="./images/C2Prog.png" width="800">
+</a>
+
 Select the compiled firmware file, then click the **Program** button to start flashing.
 
 #### Step 3: Restore the Boot Switches
@@ -66,7 +70,7 @@ After programming is complete:
    - Switch 3: **ON**
 
 <a href="url">
-  <img src="./images/SCIA_flashing2.png" width="800">
+  <img src="./images/SCIA_flashing2.png" width="600">
 </a>
 
 #### Step 4: Reconnect the Board