Update repo

C2000Ware/driverlib/.meta/gpio/gpioQual.js

@@ -0,0 +1,80 @@
+let Common   = system.getScript("/driverlib/Common.js");
+let Pinmux   = system.getScript("/driverlib/pinmux.js");
+
+let device_driverlib_peripheral = 
+    system.getScript("/driverlib/device_driverlib_peripherals/" + 
+        Common.getDeviceName().toLowerCase() + "_gpio.js");
+
+
+/* Intro splash on GUI */
+let longDescription = "The GPIO QUAL module allows you to setup your qualification settings";
+
+let config = [
+    {
+        name        : "padConfig",
+        displayName : "Pin Type",
+        description : 'Type of pin is driving the gpio.',
+        hidden      : false,
+        default     : 'STD',
+        options     : [
+            { name: "STD", displayName : "Push-pull output/floating input" },
+            { name: "PULLUP", displayName : "Push-pull output/pull-up enabled on input"  },
+            { name: "INVERT", displayName : "Push-pull output/floating INVERTED polarity on an input"  },
+            { name: "PULLUP_INVERT", displayName : "Push-pull output/pull-up enabled on INVERTED input"  },
+            { name: "OD", displayName : "Open-drain output/floating input" },
+            { name: "OD_PULLUP", displayName : "Open-drain output with pull-up enabled output and input" },
+            { name: "OD_INVERT", displayName : "Open-drain output/floating inverted input" },
+            { name: "OD_PULLUP_INVERT", displayName : "Open-drain output with pull-up enabled output and INVERTED input" }
+        ]
+    },
+    {
+        name        : "qualMode",
+        displayName : "Qualification Mode",
+        description : 'The type of qualification done on the pin.',
+        hidden      : false,
+        default     : device_driverlib_peripheral.GPIO_QualificationMode[0].name,
+        options     : device_driverlib_peripheral.GPIO_QualificationMode
+    },
+];
+
+/*
+ *  ======== filterHardware ========
+ *  Control RX, TX Pin usage by the user specified dataDirection.
+ *
+ *  param component - hardware object describing signals and
+ *                     resources they're attached to
+ *
+ *  returns Boolean indicating whether or not to allow the component to
+ *           be assigned to an instance's $hardware config
+ */
+function filterHardware(component)
+{
+    return (Common.typeMatches(component.type, ["GPIOQUAL"]));
+}
+
+function onValidate(inst, validation)
+{
+    
+}
+
+function onValidatePinmux(inst, validation) {
+
+}
+
+var gpioQualModule = {
+    displayName: "GPIO Qualification",
+    defaultInstanceName: "myGPIOQUAL",
+    description: "General Purpose IO Qualification and Pad Settings",
+    filterHardware : filterHardware,
+    validate: onValidate,
+    config: config,
+    templates: {
+        boardc : "",
+        boardh : ""
+    },
+    validatePinmux: onValidatePinmux
+};
+
+
+
+exports = gpioQualModule;